Search
You can find the results of your search below.
Fulltext results:
- Samba @docs:guide-user:services:nas
- to your needs using ''chown'' and ''chmod''. Any unknown usernames used for authentication against Samba a... and add or change the following entries in the "[global]" section in the template. <code bash> [global] domain master = yes local master = yes name r
- OpenSSL benchmarks @docs:guide-user:perf_and_log
- er has a multi core/thread SOC, please run the single-core and the multi-core tests and share both res... t start after the reboot)</color>. * For **single-core/thread** performance, simply drop the follo... " -v "ORS=" -e 'BEGIN \ {print "| " rev " single-thread "} !a[$0]++ && /(Processor|Hardware|machi... Algorithm|DSA]] Sign ^ DSA Verify ^ | r20265 single-thread | Qualcomm Atheros IP
- Lantiq SoCs @docs:techref:hardware:soc
- tried booting OpenWrt on [one]: we never got a single response from it (even after hacking around in s... om flash ==== This is taken from [[https://www.google.com/patents/US8260968 |a patent application]] an... ith clear low bits (''0b00'') is followed by a single word to be written there * an address ORed wit... K SPI pins are: * 44: CLK * 45: MOSI * (46 unknown) * 47: MISO * 48: Slave select (probably the
- unknown @docs:guide-user:installation:recovery_methods
- ====== unknown ====== The recovery method is unknown. No description of the recovery method in the git commit, OpenWrt ... es, please update the //Device Techdata// accordingly. **Check the following pages for generic recove... erial.cables|Serial Cables]] ===== Devices with unknown recovery method ===== <!-- ToH: { "source": "js
- unknown @docs:guide-user:installation:installation_methods
- ====== unknown ====== The installation method is unknown. No description of the installation method in the git commit, O... es, please update the //Device Techdata// accordingly. **Check the following pages for generic instal... lopment version of OpenWrt. ===== Devices with unknown installation method ===== <!-- ToH: { "source":
- Serial Console @docs:techref:hardware
- e a TTL serial connection, requiring a TTL-USB dongle, which can be bought for real cheap from ebay or... l cable: it will fry your board. Buy a USB-TTL dongle instead, it will still show up as serial port in... and error, at the risk of burning the USB-TTL dongle or to damage the OpenWrt device. Start by ident... then proceed to connect the ground pin to your dongle, and then try to connect the other two pins (dat
- Hotplug @docs:guide-user:base-system
- |Buttons, sound devices, serial and USB serial dongles]] * [[https://github.com/openwrt/openwrt/blob... EFM_TC_CONFIG_US | ''NORMAL'', ''PRE_EMPTION'', ''UNKNOWN'' | | DSL_EFM_TC_CONFIG_DS | ''NORMAL'', ''UNKNOWN'' | When DSL_NOTIFICATION_TYPE is ''DSL_INTERFACE_STAT... , just add this option to hotplug and run accordingly. In my case I used this: <code bash> mkdir -p
- IPv6 configuration @docs:guide-user:network:ipv6
- ed prefix length). Use 'no' if you only want a single IPv6 address for the AP itself without a subnet ... ue. <code bash> # cat /etc/config/network config globals globals option ula_prefix fd00:db80::/48 config interface wan6 option proto sta... t, but lan machines get "Destination unreachable: Unknown code 5" or "Source address failed ingress/egress
- Network configuration /etc/config/network @docs:guide-user:network
- r '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd27:70fa:5c1d::/48' config device 'lan_br' option name 'br-lan'... '2' option ports '0 5t' </code> ===== Section "globals" ===== The ''globals'' section contains interface-independent options affecting the network conf
- OpenWrt Buildroot – Technical Reference @docs:techref
- HVER ?= $(KERNEL) # disable the md5sum check for unknown kernel versions LINUX_KERNEL_MD5SUM:=$(LINUX_KERN... itions errors with user space headers. uclibc and glibc don't need these changes. Example: <code> 095... nux-in.h-with-netinet-in..patch 270-uapi-kernel.h-glibc-specific-inclusion-of-sysinfo.h.patch 271-uapi-libc-compat.h-do-not-rely-on-__GLIBC__.patch 272-uapi-if_ether.h-prevent-redefiniti
- MediaTek / Ralink @docs:techref:hardware:soc
- RT63260]] The RT63260 is a highly integrated **single-chip solution** combining AFE (Analog Front End)... L2 ==== Linux support for MediaTek xDSL ==== **unknown** ===== Devices ===== The list of related device
- unetd @docs:techref
- un-servers": [ "stun.l.google.com:19302", "stun1.l.google.com:19302" ] }, ... et members allowed to receive broadcast/multicast/unknown-unicast - sign options: upload=<ip>[
- Firewall configuration /etc/config/firewall @docs:guide-user:firewall
- an two zones, as the rule can then be set as the 'global default' for that zone.// ==== Defaults ==== The ''defaults'' section declares global firewall settings which do not belong to spec... t field to enable logging in the filter and/or mangle tables, bit 0 = filter, bit 1 = mangle. | | ''log_limit'' | string | no | ''10/minute'' | Limits the
- Setting up a TFTP server for TFTP Recovery/Install @docs:guide-user:troubleshooting
- from any untrustworthy websites. Do not download unknown version or "new" versions, that is not-shared or ... ip|media sensing]]:<code>netsh interface ipv4 set global dhcpmediasense=disabled netsh interface ipv6 set global dhcpmediasense=disabled</code> * Use a swit
- mwan3 (Multi WAN load balancing/failover) @docs:guide-user:network:wan:multiwan
- ic can be configured in the ''/etc/config/mwan3'' globals section. This is useful if you also use othe... on basis -- it is not channel-bonding, where a single connection (e.g. a single download) will use multiple WAN connections simultaneously * As such loa... ing different sites but it will not speed up a single download from one PC (unless the download is spr