Search

You can find the results of your search below.

Fulltext results:

OpenSSL benchmarks @docs:guide-user:perf_and_log
18 Hits, Last modified:
| Raspberry PI 2 Model B ... | Raspberry PI 2 Model B ... | [[toh:raspberry_pi_foundation:raspberry_pi| Raspberry Pi Model B]] | ARM1176JZF-S ... | Raspberry Pi 3 B+
Arcadyan WE420223-99 @inbox:toh:arcadyan:astoria
14 Hits, Last modified:
lash chip ==== === Connecting the flash chip to a Raspberry Pi === A Raspberry Pi can be used to program the flash chip in-circuit (thanks FPSUsername for discovering). On the Raspberry Pi, install ''xxd libubootenv-tool mtd-utils'' using ''apt'' on Raspberry Pi OS. To access the flash chip we have a specially ... p directly to the [[https://pinout.xyz/pinout/spi|Raspberry Pi's SPI pins]]. Use the following connections: {{:
stintel @developers
12 Hits, Last modified:
| | | Ubiquiti Unifi AP AC Pro | 1 | | bcm27xx | Raspberry Pi 3A+ | 1 | | | Raspberry Pi 3B+ | 2 | | | Raspberry Pi 4B 1GB | 1 | | | Raspberry Pi 4B 4GB | 3 | | | Raspberry Pi Zero W | 5 | | | Raspberry Pi Zero 2 W | 1 | | ipq4
Serial Cables @docs:techref:hardware
12 Hits, Last modified:
oryID=167&title=TTL-232R-RPi |FTDI's TTL-232R-RPi Raspberry Pi / 3.3v boards (£)]] You may need to rewire the t... program micro processors) can be downloaded from raspberry's web page //(from the Software Utilities section of the Raspberry Pi Pico documentation page. Click on the Raspberry Pi Pico section, scroll down to Software Utilities, and download the UF2 under "Debugging using another Raspberry Pi Pico")// Then you should only wire (and disregard
JTAG @docs:techref:hardware
9 Hits, Last modified:
ve a PC with parallel port but instead own a [[wp>Raspberry_Pi|Raspberry Pi]], you can use a [[https://github.com/oxplot/tjtag-pi|Raspberry Pi version]] of this software instead which uses [[http://elinux.org/RPi_Low-level_peripherals#Genera... variants:** * [[https://github.com/oxplot/tjtag-pi|tjtag-pi]] * [[https://github.com/zoobab/tjtag-arduino|tjtag-arduino]] * [[https://github.com/sta
OpenWrt SystemReady @docs:guide-user
6 Hits, Last modified:
main | :?: | HW tested | | Raspberry Pi | Raspberry Pi 4 Model B
Irqbalance @docs:guide-user:services
6 Hits, Last modified:
letion interrupts Err: 0 </code> [[toh:raspberry_pi_foundation:raspberry_pi|Raspberry Pi 4]]: <code> CPU0 CPU1 CPU2
OpenWrt Debricking Guide @docs:guide-user:troubleshooting
6 Hits, Last modified:
commands for your router could be different! === Raspberry Pi === If you don't have a USB serial ttl but have a Raspberry Pi, you can use it to connect to the router's serial pins. The Raspberry Pi's uart works at 3.3V which is the correct voltage
AdGuard Home @docs:guide-user:services:dns
5 Hits, Last modified:
builds. An alternative option could be to use a Raspberry Pi Zero plugged into your routers' USB port to run AdGuard Home: [[https://forum.openwrt.org/t/raspberry-pi-zero-as-a-router-attached-ethernet-gadget/112329|Using a Pi Zero for AdGuard Home]] ==== DNS latency/perform
AdGuard Home @es:docs:guide-user:services:dns
5 Hits, Last modified:
Una opción alternativa podría ser utilizar una Raspberry Pi Zero conectada al puerto USB de su enrutador para ejecutar AGH. [[https://forum.openwrt.org/t/raspberry-pi-zero-as-a-router-attached-ethernet-gadget/112329|Usando un Pi Zero para AGH]]. ==== Latencia/rendimiento de DN
rsalvaterra @developers
4 Hits, Last modified:
EU), TP-Link TL-WDR3600 v1.4 * bcm27xx/bcm2708: Raspberry Pi Model B+ * mediatek/filogic: Banana Pi BPI-R3, Banana Pi BPI-R4 * mediatek/mt7622: Belkin RT3200 * mvebu/cortexa9: CZ.NIC Turris Omnia (
PirateBox & LibraryBox @docs:guide-user:hardware
4 Hits, Last modified:
k, an upload possibility and a shoutbox. {{media:raspberry_pi_foundation:raspberry.pi.jpg?0x200|Some casing with a funny logo}} {{media
OpenWrt Hardware List @docs:techref:hardware
4 Hits, Last modified:
| | | [[toh:raspberry_pi_foundation:start|Raspberry Pi]] | | | | Hardk
SD card @docs:guide-user:installation:installation_methods
4 Hits, Last modified:
use an SD card. Common devices with this include Raspberry Pi and NanoPi. ==== Graphical Utilities ==== Insta... UID or edit your boot parameters. For example on raspberry pi you must update <code> /boot/cmdline.txt /boot/p
1-wire Bus @docs:techref:hardware:port.gpio
3 Hits, Last modified:
PC+** (a different method is recommended for the Raspberry Pi!). ===== Installation up to v19.07.8===== In o... ]. **This Description again refers to an Orange Pi PC+, Pin "PA3" is to be used as W1 port conected
Meeting notes - 30th November 2022 virtual meeting @meetings
2 Hits, Last modified:
LIRC GPIO blaster @docs:guide-user:hardware
2 Hits, Last modified:
USB Guest configuration @docs:guide-user:hardware
2 Hits, Last modified:
CrowdSec @docs:guide-user:services
2 Hits, Last modified:
Rescue from failed firmware upgrade @docs:guide-user:troubleshooting
2 Hits, Last modified:
SoC (System on a Chip) @docs:techref:hardware
2 Hits, Last modified:
bcm27xx @docs:techref:targets
2 Hits, Last modified:
brcm2708 @docs:techref:targets
2 Hits, Last modified:
LEDE v17.01.5 変更履歴（作業中） @ja:releases:17.01
2 Hits, Last modified:
How to capture, filter and inspect packets using tcpdump or wireshark tools @docs:guide-user:firewall:misc
2 Hits, Last modified:
CoovaChilli captive portal @docs:guide-user:services:captive-portal
2 Hits, Last modified:
DDNS Client DuckDNS @docs:guide-user:services:ddns
2 Hits, Last modified:
SoC (System on a Chip - système sur une puce) @fr:docs:techref:hardware
2 Hits, Last modified:
  • Last modified: 2026/03/06 09:44
  • by hauke