Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| ru:toh:asus:wl500gp [2017/07/19 13:49] – [TFTP] Стилевые правки grumbler_eburg | ru:toh:asus:wl500gp [2018/03/03 20:34] – ↷ Links adapted because of a move operation | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== ASUS WL-500g Premium ====== | ||
| + | В линейке <wrap em> | ||
| + | |||
| + | ASUS WL-500gP является одним из лучших маршрутизаторов с Linux на борту: большие объёмы RAM и Flash, два порта USB 2.0 и быстрый процессор. В V1 есть miniPCI слот, который позволяет менять радиомодуль. В V2 убран miniPCI слот и полностью обновлена элементная база, которая стала компактней и с меньшим энергопотреблением. | ||
| + | |||
| + | ===== Поддерживаемые версии ===== | ||
| + | ^ Версия/ | ||
| + | | v1 | - | Backfire 10.03 и новее | Радиомодуль в miniPCI слоте, заменяем ;\\ антенна | ||
| + | | v2 | - | Backfire 10.03 и новее | Большинство элементов встроены в SoC;\\ антенна **справа** (если смотреть с лицевой стороны) | | ||
| + | |||
| + | **Note:** Релиз Chaos Calmer 15.05.1 нормально работает на обоих версиях маршрутизатора. | ||
| + | |||
| + | **Note:** Все старые сведения и остальные догадки и замечания вида " | ||
| + | |||
| + | ===== Hardware Highlights ===== | ||
| + | ^ версия ^ CPU ^ Ram ^ Flash ^ Сеть ^ USB ^ Serial ^ JTag ^ | ||
| + | | v1 | Broadcom BCM4704@264Mhz | 32MiB | 8MiB | 4 x 1 | 2x 2.0 | Yes | No | | ||
| + | | v2 | Broadcom BCM5354@240Mhz | 32MiB | 8MiB | 4 x 1 | 2x 2.0 | Yes | No | | ||
| + | |||
| + | ===== Установка ===== | ||
| + | |||
| + | Этот раздел содержит инструкции по установке и обновлению OpenWrt. | ||
| + | |||
| + | ==== Выбираем правильный образ === | ||
| + | === Backfire (10.03.1) === | ||
| + | WL-500gP поддерживает 2 версии: | ||
| + | *[[http:// | ||
| + | * Использует устаревшее ядро 2.4 | ||
| + | * Использует только драйвер broadcom для поддержки радиомодуля в v2. | ||
| + | * **РЕКОМЕНДУЕТСЯ ДЛЯ | ||
| + | *[[http:// | ||
| + | * Использует ядро 2.6, Это быстрей и больше функций | ||
| + | * Использует open source драйвер b43, который не всегда корректно работает на v2 | ||
| + | * **РЕКОМЕНДУЕТСЯ ДЛЯ v1** | ||
| + | * Upgrade with [[http:// | ||
| + | |||
| + | === Attitude adjustment (12.09) === | ||
| + | *[[http:// | ||
| + | * Использует ядро 3.3.8 | ||
| + | * Быстрее предыдущих версий, | ||
| + | * Может использовать любой open source broadcom драйвер хоть wl, хоть b43. | ||
| + | |||
| + | === Chaos Calmer (15.05) === | ||
| + | *[[https:// | ||
| + | * Использует ядро 3.18.20 | ||
| + | * Протестировано 15.09.2015 на V1, установлено с помощью sysupgrade поверх 14.07. | ||
| + | * [[https:// | ||
| + | |||
| + | === Chaos Calmer (15.05.1) === | ||
| + | ASUS WL-500gP V1 | ||
| + | *[[https:// | ||
| + | |||
| + | ASUS WL-500gP V2 | ||
| + | *[[https:// | ||
| + | * Использует ядро 3.18.23 | ||
| + | * Протестировано 24.04.2016 на V2, установлено из стоковой прошивки стандартной процедурой обновления. | ||
| + | ==== OEM простая установка ==== | ||
| + | Начиная с OpenWRT Chaos Calmer 15.05 загружаем образ openwrt-*-brcm47xx-legacy-asus-wl-500gp-v? | ||
| + | |||
| + | **Примечания.** | ||
| + | - Не перезагружайте маршрутизатор во избежание его окирпичивания. | ||
| + | - Настройки заводской прошивки не сохранятся. | ||
| + | - Если адрес IP был изменён, | ||
| + | ==== OEM установка используя TRX ==== | ||
| + | Не работает. Старый метод который практически не используется и утилиту нужно давно переписать (Sep. 1st 2007, confirmed by nbd on IRC). | ||
| + | |||
| + | FIXME does this still apply? --- // | ||
| + | |||
| + | TEST STILL FAILS on ASUS WL-500g Premium V2 with newest ASUS Firmware version 3.0.4.4 --- //porter 2011/04/28 00:18// | ||
| + | |||
| + | TEST STILL FAILS on ASUS WL-500g Premium V1 with ASUS Firmware (not sure about the version) | ||
| + | |||
| + | ==== OEM установка посредством TFTP ==== | ||
| + | |||
| + | Для установки OpenWrt используя TFTP или ASUS firmware restoration tool вы должны перевести роутер в диагностический режим. | ||
| + | |||
| + | **Note:** В диагностическом режиме маршрутизатор принимает адрес IP, хранящийся в энергонезависимой памяти, | ||
| + | |||
| + | После установки прошивки адрес будет 192.168.1.1. В дальнейшем весь код будет относиться к IP 192.168.1.1 | ||
| + | |||
| + | Для перевода маршрутизатора в диагностический режим: | ||
| + | |||
| + | * Отключите шнур питания от маршрутизатора. | ||
| + | * Проверьте, | ||
| + | * Подключите компьютер к маршрутизатора в любой LAN порт. | ||
| + | * Нажмите палочкой (ручкой, | ||
| + | * Вставьте разъём питания и, подождав 10 секунд, | ||
| + | * Если вы увидели медленно мигающий светодиод POWER, это означает, | ||
| + | |||
| + | == TFTP == | ||
| + | |||
| + | Когда маршрутизатор находится в диагностическом режиме, | ||
| + | |||
| + | * Выполните команды (в примере указан адрес маршрутизатора 192.168.1.1, | ||
| + | * Linux, *BSD or Mac OS X | ||
| + | < | ||
| + | tftp 192.168.1.1 | ||
| + | tftp> binary | ||
| + | tftp> trace | ||
| + | tftp> put openwrt-brcm-2.4-squashfs.trx</ | ||
| + | * Windows | ||
| + | < | ||
| + | * Во время загрузки один из индикаторов будет часто мигать (в такт обмену пакетами). | ||
| + | * После того как загрузка прошивки завершена, | ||
| + | * Маршрутизатор презагрузитсья автоматически после завершения загрузки. Перезагрузка занимает некоторое время. Если перезагрузка не произошла автоматически, | ||
| + | * Вы это сделали! Теперь попробуйте постучаться на роутер PINGом, а после уже TELNETом IP адресс: | ||
| + | **NOTES:** | ||
| + | * В Windows 7 по умолчанию не установлен tftp клиент, | ||
| + | * Если TFTP не работает, | ||
| + | * После успешной TFTP загрузки, | ||
| + | |||
| + | == Automated Ping and TFTP Script == | ||
| + | * See: https:// | ||
| + | * Requires atftp | ||
| + | < | ||
| + | |||
| + | == ASUS firmware restoration tool (Windows only) == | ||
| + | Если ваша ОС Windows, то это рекомендуемый для Вас метод. Утилита поставляется на диске с роутером, | ||
| + | |||
| + | * Запустите программу. | ||
| + | * Укажите на .trx файл (openwrt-brcm-2.4-squashfs.trx). | ||
| + | * Зажмите " | ||
| + | * Вы это сделали! Теперь попробуйте постучаться на роутер PINGом, а после уже TELNETом IP адресс: | ||
| + | |||
| + | ===== Upgrading OpenWrt ===== | ||
| + | |||
| + | If you have already installed OpenWrt and like to reflash for e.g. upgrading to a new OpenWrt version you can upgrade using the mtd command line tool. It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. | ||
| + | |||
| + | == LuCI Web Upgrade Process == | ||
| + | |||
| + | FIXME use correct URL | ||
| + | *Browse to http:// | ||
| + | *Upload TRX file to LuCI | ||
| + | *Wait for reboot | ||
| + | |||
| + | == Terminal Upgrade Process == | ||
| + | |||
| + | *Login as root via SSH on 192.168.1.1 | ||
| + | *Use the following commands to upgrade. | ||
| + | |||
| + | < | ||
| + | cd /tmp/ | ||
| + | wget http:// | ||
| + | sysupgrade / | ||
| + | |||
| + | If this does not work (reboot without change) try using mdt. Make sure " | ||
| + | < | ||
| + | cd /tmp/ | ||
| + | wget [link to image] | ||
| + | mtd -r write / | ||
| + | </ | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ===== Hardware ===== | ||
| + | ==== Info ==== | ||
| + | | **Version: | ||
| + | | **[[wp> | ||
| + | | **Vendor: | ||
| + | | **[[docs: | ||
| + | | **[[docs: | ||
| + | | **[[docs: | ||
| + | | **Flash-Chip: | ||
| + | | **Flash size:** | 8 MiB | 8 MiB | | ||
| + | | **RAM-Chips: | ||
| + | | **RAM size:** | 32* MiB | 32 MiB | | ||
| + | | **Wireless: | ||
| + | | **Ethernet: | ||
| + | | **USB:** | 2x 2.0 [[http:// | ||
| + | | **Power adapter** | 5V DC 2.5 A / UMEC UP0181B-05PE | :?: | | ||
| + | | **[[docs: | ||
| + | | **[[docs: | ||
| + | |||
| + | * some older models have only 16 MiB enabled. | ||
| + | |||
| + | ==== Photos ==== | ||
| + | |||
| + | [[: | ||
| + | |||
| + | [[: | ||
| + | |||
| + | ==== Открытие корпуса ==== | ||
| + | |||
| + | **Note:** Это действие лишает гарантии | ||
| + | |||
| + | Уберите 4 резиновые заглушки на ногах, под ними будет 4 винта откручиваем и поддеваем верхнюю крышку. Должна сниматься без особых усилий. | ||
| + | |||
| + | ==== Последовательный порт ==== | ||
| + | === V1 === | ||
| + | |||
| + | Последовательный порт готов к пайке (подгтовлен под 8-pin коннектор для подключения data-кабеля) в центре и правее верхней части. Смотри фото | ||
| + | Если не понятно по фото то ниже будет распиновка (V1): | ||
| + | | RESET | | | ||
| + | | GND | 3.3V_OUT | | ||
| + | | UART_TX1 | UART_TX0 | | ||
| + | | UART_RX1 | UART_RX0 | | ||
| + | Pin 1 (with the square solder pad) is RX0. | ||
| + | |||
| + | {{media: | ||
| + | === V2 === | ||
| + | Для (V2) tts/0 это J4 площадка под пайку: | ||
| + | | 3.3V_OUT | | ||
| + | | UART_RX0 | | ||
| + | | UART_TX0 | | ||
| + | | GND | | ||
| + | 3.3V_OUT это вход рядом с подписью J4 и этот вход ближе к голотипу ASUS. | ||
| + | |||
| + | В V1 COM-порт CMOS уровня, | ||
| + | |||
| + | Для подключени через COM V2, VCC Вам не нужен. TX COMa в UART_RX0 pin, RX COMa в UART_TX0 pin. Вот журнал загрузки через COM | ||
| + | / | ||
| + | |||
| + | ==== Buttons ==== | ||
| + | The ASUS WL-500g Premium has two buttons. They are RESTORE and EZSETUP. The buttons can be used with hotplug events. E. g. [# | ||
| + | ^ BUTTON ^ Event ^ | ||
| + | | RESTORE | reset | | ||
| + | | EZSETUP | ses | | ||
| + | |||
| + | ACTION: released or pressed | ||
| + | |||
| + | |||
| + | ===== Замена радиомодуля ===== | ||
| + | |||
| + | **Note:** Только v1 ! | ||
| + | |||
| + | Стандартный радиомодуль это MiniPCI карта BCM4318. Некоторые меняют эту карту на Atheros. Эта карта работает на драйвере с открытым исходным кодом, что позволяет работать на ядре 2.6 | ||
| + | Для того что бы заменить карточку необходимо открыть роутер, | ||
| + | Установите пакеты kmod-madwifi и hostapd-mini что бы добавить новый беспроводной адаптер. | ||
| + | |||
| + | Отредактируйте ваш | ||
| + | |||
| + | | '' | ||
| + | option ' | ||
| + | |||
| + | config ' | ||
| + | option ' | ||
| + | |||
| + | Зайдите | ||
| + | |||
| + | После установки kmod-madwifi вы можете автоматически создать стандартный файл / | ||
| + | |||
| + | < | ||
| + | opkg update | ||
| + | opkg install kmod-madwifi wpad-mini | ||
| + | rm -f / | ||
| + | wifi detect > / | ||
| + | </ | ||
| + | |||
| + | |||
| + | ===== Specific Configuration ===== | ||
| + | ==== Interfaces ==== | ||
| + | The default network configuration is: | ||
| + | ^ Interface Name ^ Description ^ Default configuration ^ | ||
| + | | br-lan | LAN & WiFi | 192.168.1.1/ | ||
| + | | vlan0 | LAN ports (1 to 4) | | | ||
| + | | vlan1 | WAN port | DHCP | | ||
| + | | wl0/ath0 | WiFi | Disabled by default | | ||
| + | |||
| + | |||
| + | LAN and WiFi is bridged to br-lan. WiFi is disabled by default for security reasons (to prevent an open access point). | ||
| + | ===== Switch Ports (for VLANs) ===== | ||
| + | Please note that the link between the physical ports and switch ports is different for v1 and v2 routers (see table below). | ||
| + | |||
| + | ^ Port ^ Switch port (v1) ^ Switch port (v2) ^ | ||
| + | | Internet (WAN) | 0 | 4 | | ||
| + | | LAN 1 | 1 | 3 | | ||
| + | | LAN 2 | 2 | 2 | | ||
| + | | LAN 3 | 3 | 1 | | ||
| + | | LAN 4 | 4 | 0 | | ||
| + | | Internal connection | 5 | 5 | | ||
| + | |||
| + | 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the v2 unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. For v1 unit, WAN is switch port 0. LAN ports are switch ports 1, | ||
| + | |||
| + | ===== Failsafe mode ===== | ||
| + | |||
| + | If you forgot your password, broken one of the startup scripts, firewalled yourself or corrupted the JFFS2 partition, you can get back in by using OpenWrt' | ||
| + | |||
| + | ==== Boot into failsafe mode ==== | ||
| + | * Unplug the router' | ||
| + | * Connect the router' | ||
| + | * Configure your PC with a static IP address between 192.168.1.2 and 192.168.1.254. E. g. 192.168.1.2 (gateway and DNS is not required). | ||
| + | * Plug the power on and wait for the power LED to switch off | ||
| + | * While the power LED is off press any button (RESTORE and EZSETUP will work) a few times | ||
| + | * Power LED goes fast-blinking (about 1 time per second) | ||
| + | * You should be able to telnet to the router at 192.168.1.1 now (no username and password) | ||
| + | |||
| + | |||
| + | ===== Активация всей RAM ===== | ||
| + | *Note:* Это актуально только для WL-500gP v1. | ||
| + | |||
| + | На новых | ||
| + | |||
| + | < | ||
| + | nvram set sdram_init=0x0009 | ||
| + | nvram set sdram_ncdl=0x10308 | ||
| + | nvram commit | ||
| + | reboot | ||
| + | </ | ||
| + | Note: | ||
| + | * В этом нет необходимости если у Вас 10.03.1 и V1 (BCM4704) - Может быть нужно для BCM4780? | ||
| + | * using a " | ||
| + | |||
| + | |||
| + | ===== Basic configuration ===== | ||
| + | Since this part is identical for all devices, see [[docs: | ||
| + | |||
| + | ===== Connect stuff to the USB port ===== | ||
| + | To connect stuff to the USB port, please see [[docs: | ||
| + | |||
| + | ===== Hardware Mods ===== | ||
| + | nothing? | ||
| + | ===== Bootlogs ===== | ||
| + | ==== V1 Attitude Adjustment bootlog ==== | ||
| + | <WRAP bootlog> | ||
| + | < | ||
| + | [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 16:01:31 UTC 2013 | ||
| + | [ 0.000000] CPU revision is: 00029006 (Broadcom BMIPS3300) | ||
| + | [ 0.000000] bcm47xx: using ssb bus | ||
| + | [ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x00 | ||
| + | [ 0.000000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x03, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x03, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 6 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x00, vendor 0x4243) | ||
| + | [ 0.000000] ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x02, vendor 0x4243) | ||
| + | [ 0.000000] ssb: chipcommon status is 0x0 | ||
| + | [ 0.000000] ssb: Initializing MIPS core... | ||
| + | [ 0.000000] ssb: set_irq: core 0x0806, irq 4 => 4 | ||
| + | [ 0.000000] ssb: set_irq: core 0x0806, irq 5 => 5 | ||
| + | [ 0.000000] ssb: set_irq: core 0x0808, irq 6 => 2 | ||
| + | [ 0.000000] ssb: set_irq: core 0x0804, irq 2 => 6 | ||
| + | [ 0.000000] ssb: after irq reconfiguration | ||
| + | [ 0.000000] ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I | ||
| + | [ 0.000000] ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I | ||
| + | [ 0.000000] ssb: core 0x0806, irq : 2(S) 3 4 5* 6 D I | ||
| + | [ 0.000000] ssb: core 0x0808, irq : 2(S)* 3 4 5 6 D I | ||
| + | [ 0.000000] ssb: core 0x0804, irq : 2(S) 3 4 5 6* D I | ||
| + | [ 0.000000] ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I | ||
| + | [ 0.000000] ssb: core 0x0807, irq : 2(S)* 3 4 5 6 D I | ||
| + | [ 0.000000] ssb: core 0x080b, irq : 2(S)* 3 4 5 6 D I | ||
| + | [ 0.000000] ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I* | ||
| + | [ 0.000000] found parallel flash. | ||
| + | [ 0.000000] Unsupported SPROM revision 0 detected. Will extract v1 | ||
| + | [ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000 | ||
| + | [ 0.000000] Serial init done. | ||
| + | [ 0.000000] gpiochip_add: | ||
| + | [ 0.000000] Determined physical RAM map: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Initrd not found or empty - disabling initrd | ||
| + | [ 0.000000] Zone PFN ranges: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Movable zone start PFN for each node | ||
| + | [ 0.000000] Early memory PFN ranges | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] On node 0 totalpages: 8192 | ||
| + | [ 0.000000] free_area_init_node: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | ||
| + | [ 0.000000] pcpu-alloc: [0] 0 | ||
| + | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 | ||
| + | [ 0.000000] Kernel command line: root=/ | ||
| + | [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) | ||
| + | [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) | ||
| + | [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) | ||
| + | [ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes. | ||
| + | [ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes | ||
| + | [ 0.000000] Memory: 29100k/ | ||
| + | [ 0.000000] NR_IRQS:128 | ||
| + | [ 0.000000] console [ttyS0] enabled | ||
| + | [ 0.004000] Calibrating delay loop... 262.14 BogoMIPS (lpj=524288) | ||
| + | [ 0.048000] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.052000] Mount-cache hash table entries: 512 | ||
| + | [ 0.060000] NET: Registered protocol family 16 | ||
| + | [ 0.096000] bio: create slab < | ||
| + | [ 0.108000] Switching to clocksource MIPS | ||
| + | [ 0.124000] ssb: PCIcore in host mode found | ||
| + | [ 0.432000] PCI host bridge to bus 0000:00 | ||
| + | [ 0.436000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff] | ||
| + | [ 0.444000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff] | ||
| + | [ 0.448000] pci 0000: | ||
| + | [ 0.448000] PCI: Fixing up bridge 0000: | ||
| + | [ 0.452000] pci 0000: | ||
| + | [ 0.452000] PCI: Fixing up device 0000: | ||
| + | [ 0.456000] PCI: Fixing latency timer of device 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.464000] pci 0000: | ||
| + | [ 0.468000] pci 0000: | ||
| + | [ 0.468000] pci 0000: | ||
| + | [ 0.468000] pci 0000: | ||
| + | [ 0.472000] pci 0000: | ||
| + | [ 0.480000] pci 0000: | ||
| + | [ 0.488000] pci 0000: | ||
| + | [ 0.492000] pci 0000: | ||
| + | [ 0.504000] PCI: Enabling device 0000: | ||
| + | [ 0.512000] PCI: Fixing up device 0000: | ||
| + | [ 0.516000] b43-pci-bridge 0000: | ||
| + | [ 0.536000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 | ||
| + | [ 0.540000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) | ||
| + | [ 0.540000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) | ||
| + | [ 0.540000] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) | ||
| + | [ 0.540000] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) | ||
| + | [ 0.560000] ssb: chipcommon status is 0x0 | ||
| + | [ 0.564000] ssb: SPROM offset is 0x1000 | ||
| + | [ 0.568000] ssb: SPROM revision 2 detected. | ||
| + | [ 0.588000] ssb: Sonics Silicon Backplane found on PCI device 0000: | ||
| + | [ 0.600000] NET: Registered protocol family 2 | ||
| + | [ 0.604000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.612000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) | ||
| + | [ 0.620000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.624000] TCP: Hash tables configured (established 1024 bind 1024) | ||
| + | [ 0.632000] TCP reno registered | ||
| + | [ 0.636000] UDP hash table entries: 256 (order: 0, 4096 bytes) | ||
| + | [ 0.640000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | ||
| + | [ 0.648000] NET: Registered protocol family 1 | ||
| + | [ 0.652000] PCI: CLS 0 bytes, default 16 | ||
| + | [ 0.664000] squashfs: version 4.0 (2009/ | ||
| + | [ 0.668000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | ||
| + | [ 0.680000] msgmni has been set to 56 | ||
| + | [ 0.684000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) | ||
| + | [ 0.692000] io scheduler noop registered | ||
| + | [ 0.696000] io scheduler deadline registered (default) | ||
| + | [ 0.704000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled | ||
| + | [ 0.732000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A | ||
| + | [ 0.760000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A | ||
| + | [ 0.804000] serial8250.0: | ||
| + | [ 0.832000] serial8250.0: | ||
| + | [ 0.844000] bcm47xx_pflash: | ||
| + | [ 0.852000] Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001301 | ||
| + | [ 0.860000] Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 | ||
| + | [ 0.864000] Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 | ||
| + | [ 0.864000] Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 | ||
| + | [ 0.864000] Amd/Fujitsu Extended Query Table at 0x0040 | ||
| + | [ 0.868000] | ||
| + | [ 0.872000] number of CFI chips: 1 | ||
| + | [ 0.876000] bcm47xx_pflash: | ||
| + | [ 0.884000] bcm47xx_part: | ||
| + | [ 0.892000] bcm47xx_part: | ||
| + | [ 0.900000] bcm47xx_part: | ||
| + | [ 0.904000] 4 bcm47xx partitions found on MTD device Physically mapped flash | ||
| + | [ 0.912000] Creating 4 MTD partitions on " | ||
| + | [ 0.920000] 0x000000000000-0x000000040000 : " | ||
| + | [ 0.932000] 0x000000040000-0x0000007f0000 : " | ||
| + | [ 0.940000] 0x000000133c00-0x0000007f0000 : " | ||
| + | [ 0.944000] mtd: partition " | ||
| + | [ 0.964000] mtd: partition " | ||
| + | [ 0.968000] mtd: partition " | ||
| + | [ 0.976000] 0x000000310000-0x0000007f0000 : " | ||
| + | [ 0.988000] 0x0000007f0000-0x000000800000 : " | ||
| + | [ 1.000000] bcm47xx_sflash: | ||
| + | [ 1.008000] bcm47xx_nflash: | ||
| + | [ 1.016000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 | ||
| + | [ 1.028000] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00: | ||
| + | [ 1.044000] b44 ssb0:1: eth1: PHY Reset would not complete | ||
| + | [ 1.048000] b44 ssb0:1: eth1: Broadcom 44xx/47xx 10/100 PCI ethernet driver 40: | ||
| + | [ 1.060000] BCM47xx Watchdog Timer enabled (30 seconds, nowayout) | ||
| + | [ 1.068000] TCP cubic registered | ||
| + | [ 1.072000] NET: Registered protocol family 17 | ||
| + | [ 1.076000] Bridge firewalling registered | ||
| + | [ 1.080000] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 1.096000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. | ||
| + | [ 1.104000] Freeing unused kernel memory: 168k freed | ||
| + | [ 4.320000] diag: Detected 'ASUS WL-500g Premium' | ||
| + | [ 4.376000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex | ||
| + | [ 4.384000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX | ||
| + | [ 5.520000] roboswitch: Probing device eth0: found a 5325! It's a 5350. | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | </ | ||
| + | |||
| + | ==== V2 Backfire bootlog ==== | ||
| + | <WRAP bootlog> | ||
| + | < | ||
| + | |||
| + | |||
| + | CFE version 1.0.37 for BCM947XX (32bit, | ||
| + | Build Date: Mon Apr 16 14:41:05 CST 2007 (root@localhost.localdomain) | ||
| + | Copyright (C) 2000, | ||
| + | |||
| + | Initializing Arena | ||
| + | Initializing Devices. | ||
| + | Boot partition size = 131072(0x20000) | ||
| + | et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.23.0 | ||
| + | CPU type 0x29029: 240MHz | ||
| + | Total memory: 32768 KBytes | ||
| + | |||
| + | Total memory used by CFE: 0x80400000 - 0x8049A790 (632720) | ||
| + | Initialized Data: 0x80430720 - 0x80432D10 (9712) | ||
| + | BSS Area: 0x80432D10 - 0x80434790 (6784) | ||
| + | Local Heap: 0x80434790 - 0x80498790 (409600) | ||
| + | Stack Area: 0x80498790 - 0x8049A790 (8192) | ||
| + | Text (code) segment: | ||
| + | Boot area (physical): | ||
| + | Relocation Factor: | ||
| + | |||
| + | Device eth0: hwaddr 00-1F-XX-XX-XX-XX, | ||
| + | gateway not set, nameserver not set | ||
| + | Null Rescue Flag. | ||
| + | Loader:raw Filesys: | ||
| + | Loading: TFTP Server. | ||
| + | Failed. | ||
| + | Could not load :: Timeout occured | ||
| + | Loader:raw Filesys:raw Dev: | ||
| + | Loading: .. 4092 bytes read | ||
| + | Entry at 0x80001000 | ||
| + | Closing network. | ||
| + | Starting program at 0x80001000 | ||
| + | Linux version 2.6.32.27 (jow@nd-build-02.linux-appliance.net) (gcc version 4.3.3 (GCC) ) #5 Wed Dec 21 05:56:26 CET 2011 | ||
| + | CPU revision is: 00029029 (Broadcom BCM3302) | ||
| + | ssb: chipcommon status is 0x0 | ||
| + | ssb: Initializing MIPS core... | ||
| + | ssb: set_irq: core 0x0806, irq 4 => 4 | ||
| + | ssb: set_irq: core 0x0816, irq 5 => 2 | ||
| + | ssb: set_irq: core 0x0812, irq 2 => 5 | ||
| + | ssb: after irq reconfiguration | ||
| + | ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I | ||
| + | ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I | ||
| + | ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I | ||
| + | ssb: core 0x0819, irq : 2(S) 3 4 5 6* D I | ||
| + | ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I* | ||
| + | ssb: core 0x0812, irq : 2(S) 3 4 5* 6 D I | ||
| + | ssb: core 0x081c, irq : 2(S) 3 4 5 6 D I* | ||
| + | ssb: Sonics Silicon Backplane found at address 0x18000000 | ||
| + | Serial init done. | ||
| + | Determined physical RAM map: | ||
| + | | ||
| + | Initrd not found or empty - disabling initrd | ||
| + | Zone PFN ranges: | ||
| + | Normal | ||
| + | Movable zone start PFN for each node | ||
| + | early_node_map[1] active PFN ranges | ||
| + | 0: 0x00000000 -> 0x00002000 | ||
| + | Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 | ||
| + | Kernel command line: root=/ | ||
| + | PID hash table entries: 128 (order: -3, 512 bytes) | ||
| + | Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) | ||
| + | Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) | ||
| + | Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. | ||
| + | Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes | ||
| + | Memory: 29496k/ | ||
| + | Hierarchical RCU implementation. | ||
| + | NR_IRQS:128 | ||
| + | console [ttyS0] enabled | ||
| + | Calibrating delay loop... 239.61 BogoMIPS (lpj=479232) | ||
| + | Mount-cache hash table entries: 512 | ||
| + | NET: Registered protocol family 16 | ||
| + | bio: create slab < | ||
| + | Switching to clocksource MIPS | ||
| + | NET: Registered protocol family 2 | ||
| + | IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | TCP established hash table entries: 1024 (order: 1, 8192 bytes) | ||
| + | TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | TCP: Hash tables configured (established 1024 bind 1024) | ||
| + | TCP reno registered | ||
| + | NET: Registered protocol family 1 | ||
| + | squashfs: version 4.0 (2009/ | ||
| + | Registering mini_fo version $Id$ | ||
| + | JFFS2 version 2.2. (NAND) (SUMMARY) | ||
| + | msgmni has been set to 57 | ||
| + | io scheduler noop registered | ||
| + | io scheduler deadline registered (default) | ||
| + | Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled | ||
| + | serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A | ||
| + | serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A | ||
| + | serial8250.0: | ||
| + | serial8250.0: | ||
| + | flash init: 0x1c000000 0x02000000 | ||
| + | Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank | ||
| + | CFI mfr 0x000000c2 | ||
| + | CFI id 0x000022cb | ||
| + | | ||
| + | Amd/Fujitsu Extended Query version 1.1. | ||
| + | number of CFI chips: 1 | ||
| + | cfi_cmdset_0002: | ||
| + | Flash device: 0x800000 at 0x1fc00000 | ||
| + | bootloader size: 131072 | ||
| + | Creating 4 MTD partitions on " | ||
| + | 0x000000000000-0x000000020000 : " | ||
| + | 0x000000020000-0x0000007f0000 : " | ||
| + | 0x0000000fb000-0x0000007f0000 : " | ||
| + | mtd: partition " | ||
| + | mtd: partition " | ||
| + | mtd: partition " | ||
| + | 0x0000002e0000-0x0000007f0000 : " | ||
| + | 0x0000007f0000-0x000000800000 : " | ||
| + | b44.c:v2.0 | ||
| + | eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00: | ||
| + | BCM47xx Watchdog Timer enabled (30 seconds, nowayout) | ||
| + | TCP westwood registered | ||
| + | NET: Registered protocol family 17 | ||
| + | 802.1Q VLAN Support v1.8 Ben Greear < | ||
| + | All bugs added by David S. Miller < | ||
| + | VFS: Mounted root (squashfs filesystem) readonly on device 31:2. | ||
| + | Freeing unused kernel memory: 136k freed | ||
| + | Please be patient, while OpenWrt loads ... | ||
| + | diag: Detected 'ASUS WL-500g Premium V2' | ||
| + | b44: eth0: Link is up at 100 Mbps, full duplex. | ||
| + | b44: eth0: Flow control is off for TX and off for RX. | ||
| + | roboswitch: Probing device eth0: found a 5325! It's a 5350. | ||
| + | - preinit - | ||
| + | Press the [f] key and hit [enter] to enter failsafe mode | ||
| + | - regular preinit - | ||
| + | switching to jffs2 | ||
| + | mini_fo: using base directory: / | ||
| + | mini_fo: using storage directory: /overlay | ||
| + | - init - | ||
| + | b44: eth0: powering down PHY | ||
| + | |||
| + | Please press Enter to activate this console. b44: eth0: Link is up at 100 Mbps, full duplex. | ||
| + | b44: eth0: Flow control is off for TX and off for RX. | ||
| + | device eth0.0 entered promiscuous mode | ||
| + | device eth0 entered promiscuous mode | ||
| + | br-lan: port 1(eth0.0) entering forwarding state | ||
| + | Compat-wireless backport release: compat-wireless-2011-11-08-1-g4ab9b62 | ||
| + | Backport based on wireless-testing.git master-2011-11-15 | ||
| + | cfg80211: Calling CRDA to update world regulatory domain | ||
| + | PPP generic driver version 2.4.2 | ||
| + | NET: Registered protocol family 24 | ||
| + | b43-phy0: Broadcom 5354 WLAN found (core revision 13) | ||
| + | Registered led device: b43-phy0:: | ||
| + | Registered led device: b43-phy0:: | ||
| + | Broadcom 43xx driver loaded [ Features: PL ] | ||
| + | Broadcom 43xx-legacy driver loaded [ Features: PLID ] | ||
| + | ip_tables: (C) 2000-2006 Netfilter Core Team | ||
| + | nf_conntrack version 0.5.0 (463 buckets, 1852 max) | ||
| + | CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use | ||
| + | nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or | ||
| + | sysctl net.netfilter.nf_conntrack_acct=1 to enable it. | ||
| + | cfg80211: World regulatory domain updated: | ||
| + | cfg80211: | ||
| + | cfg80211: | ||
| + | cfg80211: | ||
| + | cfg80211: | ||
| + | cfg80211: | ||
| + | cfg80211: | ||
| + | xt_time: kernel timezone is -0000</ | ||
| + | </ | ||
| + | |||
| + | ===== External Links ===== | ||
| + | ==== Tutorials ==== | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | ==== Product Info Pages ==== | ||
| + | * FCC ID: MSQWL500GP [[https:// | ||
| + | * [[http:// | ||
| + | * [[oldwiki: | ||
| + | * official ASUS website: [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | |||
| + | ==== Forum Threads ==== | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | * [[http:// | ||
| + | |||
| + | ===== Tags ===== | ||
| + | {{tag> | ||