Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:asus:asus_wl-330ge [2015/10/01 06:34] – Created from the form at meta:create_new_device_page rayknightru:toh:asus:asus_wl-330ge [2018/03/04 10:31] bobafetthotmail
Line 1: Line 1:
 +====== Asus WL-330gE ======
 +QDSL-1040WU высокопроизводительный универсальный шлюз доступа, обеспечивающий подключение к IP-сети с использованием технологии ADSL2+ или Ethernet. Шлюз предназначен для использования в сетях широкополосного доступа xDSL или FTTx. Широкий набор функций маршрутизации и встроенная точ-ка доступа Wi-Fi 802.11n обеспечивает возможность использования устройства как маршрутизатора для небольшой сети. USB-порт шлюза позволяет использовать 3G модем для подключения к сети Интернет.
 +Поддерживается работа в сетях 2G/3Gи СDMA (СкайЛинк).
  
 +Ключевые возможности:
 +
 +ADSL2/2+ и Ethernet-маршрутизатор;
 +Встроенная точка доступа 802.11 b/g/n;
 +WPA/WPA-2;
 +WMM;
 +Один из портов LAN-может использоваться как WAN-порт, для подключения к сети Ethernet/PON;
 +VPN Pass-Through;
 +IP QOS;
 +IGMP Proxy;
 +До 16 PVC;
 +Статическая маршрутизация;
 +Резервирование канала при использовании 3G-модема;
 +Родительский контроль;
 +Загрузка и выгрузка конфигурации;
 +TR-069/TR-098/TR-104/TR-111.
 +Оф. Сайт http://www.qtech.ru/catalog/archadsl/171/chars.htm
 +===== Supported Versions =====
 +
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Topic URL_url, Device Techdata_pageid
 +headers    : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c,c
 +filter  : Brand=Asus
 +filter  : Model=WL-330gE
 +filter  : Versions~
 +----
 +
 +
 +chaos_calmer 15.05, initial test, WIFI is randomly disappeared, 
 +https://downloads.openwrt.org/chaos_calmer/15.05/brcm47xx/legacy/openwrt-15.05-brcm47xx-legacy-asus-wl-330ge-squashfs.trx
 +
 +===== Hardware Highlights =====
 +
 +---- datatable ----
 +cols    : Model, Versions, Platform, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Brand=Asus
 +filter  : Model=WL-330gE
 +filter  : Versions~
 +----
 +
 +===== Installation =====
 +  - → [[:downloads]]
 +  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]]
 +  - → [[about/latest|Latest OpenWrt release]]
 +
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +align   : l,c
 +filter  : Brand=Asus
 +filter  : Model=WL-330gE
 +filter  : Versions~
 +----
 +
 +==== Flash Layout ====
 +Please check out the article [[docs:techref:flash.layout]]. It contains an example and a couple of explanations.
 +
 +==== OEM easy installation ====
 +
 +| FIXME The instructions below are for Broadcom devices and only serve as an example. Don't leave them in place if they do not apply to a particular device! |
 +
 +This section deals with how you install OpenWrt from a device freshly opened.  Plus the steps required such as reset to factory defaults if the device has already been configured
 +
 +**Note:** Reset router to factory defaults if it has been previously configured.
 +  *Browse to http://192.168.1.1/Upgrade.asp
 +  *Upload .bin file to router
 +  *Wait for it to reboot
 +  *Telnet to 192.168.1.1 and set a root password, or browse to http://192.168.1.1 if LuCI is installed.
 +
 +==== OEM installation using the TFTP method ====
 +
 +->  [[docs:guide-user:installation:generic.flashing.tftp]]
 +
 +=== Specific values you need ===
 +
 +| Bootloader tftp server IPv4 address | FILL-IN |
 +| Bootloader MAC address (special) | FILL-IN |
 +| Firmware tftp image | [[about/latest|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) |
 +| TFTP Transfer Window | FILL-IN seconds |
 +| TFTP Window Start | approximately FILL-IN seconds after power on |
 +| TFTP Client Required IP Address | FILL-IN |
 +
 +==== Upgrading OpenWrt ====
 +->  [[docs:guide-user:installation:generic.sysupgrade]]
 +
 +If you have already installed OpenWrt and like to reflash for e.g. upgrading to a new OpenWrt version you can upgrade using the mtd command line tool. It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
 +
 +=== LuCI Web Upgrade Process ===
 +
 +  * Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
 +  * Upload image file for sysupgrade to LuCI
 +  * Wait for reboot
 +
 +=== Terminal Upgrade Process ===
 +
 +  * Login as root via SSH on 192.168.1.1
 +  * Use the following commands to upgrade.
 +
 +<code>
 +cd /tmp/
 +wget http://http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
 +sysupgrade /tmp/xxx.abc
 +</code>
 +
 +  *If sysupgrade does not support this router, use the following commands.
 +
 +<code>
 +cd /tmp/
 +wget http://http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
 +mtd write /tmp/xxx.abc linux && reboot</code>
 +
 +
 +===== Basic configuration =====
 +-> [[docs:guide-quick-start:checks_and_troubleshooting|Basic configuration]] After flashing, proceed with this.\\
 +Set up your Internet connection, configure wireless, configure USB port, etc.
 +
 +
 +===== Specific Configuration =====
 +==== Interfaces ====
 +
 +The default network configuration is:
 +^ Interface Name ^ Description ^ Default configuration ^
 +| br-lan | LAN & WiFi | 192.168.1.1/24 | 
 +| vlan0 (eth0.0) | LAN ports (1 to 4) | None | 
 +| vlan1 (eth0.1) | WAN port | DHCP | 
 +| wl0 | WiFi | Disabled | 
 +
 +==== Switch Ports (for VLANs) ====
 +Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.
 +^ Port ^ Switch port ^
 +| Internet (WAN) | 4 | 
 +| LAN 1 | 3 | 
 +| LAN 2 | 2 | 
 +| LAN 3 | 1 | 
 +| LAN 4 | 0 | 
 +
 +==== Failsafe mode ====
 +-> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]
 +
 +==== Buttons ====
 +-> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 +
 +The Linksys WRT54GL has two buttons. They are Reset and Secure Easy Setup. Here, we merely name the buttons, so we can use them in the above Howto:
 +^ BUTTON ^ Event ^
 +| Reset | reset | 
 +| Secure Easy Setup | ses | 
 +
 +
 +===== Hardware =====
 +==== Info ====
 +---- datatemplatelist dttpllist ----
 +template: meta:template_datatemplatelist
 +cols    : Brand, Model, Versions, Device Type, Availability, Supported Since Rev, Supported since Rel, Supported current Rel,  Instruction Set, Sub Instruction Set, Bootloader, Platform, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_
 +filter  : Brand=Asus
 +filter  : Model=WL-330gE
 +----
 +==== Photos ====
 +Model Number
 +
 +//Front://
 +
 +**Photo of front of the casing**
 +
 +//Back://
 +
 +**Photo of back of the casing**
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +  *To remove the cover do a/b/c
 +
 +//Main PCB//
 +
 +**Photo of PCB**
 +
 +==== Serial ====
 +-> [[docs:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +How to connect to the Serial Port of this specific device:
 +
 +**Photo of PCB with markings**
 +
 +==== JTAG ====
 +-> [[docs:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:
 +
 +**Photo of PCB with markings**
 +
 +
 +===== Debricking =====
 +-> [[docs:guide-user:troubleshooting:generic.debrick]]
 +
 +===== Bootloader Mods =====
 +  - you could read about [[docs:techref:bootloader]] in general
 +
 +===== Hardware mods =====
 +  - as a beginner, you really should inform yourself about [[docs:hardware:soldering]] in general and then obtain some practical experience!
 +
 +==== 128MiB RAM Mod ====
 +==== I²C GPIO Mod ====
 +==== I²C Tiny-USB Mod ====
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +<WRAP bootlog>
 +<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>
 +</WRAP>\\
 +
 +
 +===== Notes =====
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>GigabitEthernet FastEthernet 1NIC 1WNIC 5Port USB 2USB ath9k DetachableAntenna 32RAM 8Flash MIPS MIPS32 34K}}
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1