Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
playground:sample-device-page [2016/10/26 15:03] – created richb-hanoverplayground:sample-device-page [2018/03/03 20:56] – ↷ Links adapted because of a move operation bobafetthotmail
Line 1: Line 1:
-====== Vendor XYZ Model 123 ======+====== Netgear WNDR3800 (prototype) ====== 
 + 
 +//The @@Brand@@ model @@Model@@ is a router with ? gigabit LAN ports, ? gigabit WAN port, and ? wifi radios. The rest of this paragraph should provide a two-three sentence explanation of what makes it good. No marketing fluff, please.// 
 + 
 +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
 + * After you have updated this page with good information regarding the LEDE build, 
 + * consider removing the "Note" below, so this page can become the definitive 
 + * source of information about the device on the LEDE site. Thanks! 
 + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
 + 
 +| **Note** | This page is an automatically-generated placeholder for this device. If you own one of these devices, please take the time to update this page to with what you've learned. 
 + 
 +Historical information for the @@brand@@ @@model@@ may be available from the original Device Page on the OpenWrt site at: @@URL-To-OpenWrt-Device-Page@@
  
-//WIP  -richb-hanover// 
  
 ===== Hardware Information ===== ===== Hardware Information =====
 +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 + *
 +                    DO NOT CHANGE THIS SECTION OF THIS PAGE.
 + *
 + * This Hardware Information section is automatically generated, using information from the Device Techdata. 
 + * To update the information for the device, click Cancel, then click View/Edit data in the Links tab.
 + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
  
-Automatically generated "See OpenWrt Device Page at https:..." A person who updates this page would remove this link to the OpenWrt page+//Note: Information below will be automatically generated from ToH dataentry pages\\ 
 +The data shown is a placeholder, using information about the Netgear WNDR3800 to show how it would appear.//
  
-=====Getting and Flashing Firmware ===== +<WRAP 100%> 
-(empty to start, but should contain narrative to tell how to do it)+<tabbox LEDE Support> 
 +---- datatable ---- 
 +cols    : Model, Versions, LEDE Supported Current Rel_releasepage, LEDE Forum Topic URL_url, OEM device homepage URL_url 
 +headers : Model, Version, Current Release, Forum Topic, OEM Info 
 +align   : l,l,c 
 +filter  : Brand=Netgear 
 +filter  : Model=WNDR3800 
 +----
  
-===== Other Hardware Information ===== +<tabbox Hardware Highlights> 
- (empty to start, but should contain memory layouts, pinouts for RS-232/JTAGetc.)+---- datatable ---- 
 +cols    : Model , Versions , CPU , CPU MHz , Flash MB_mbflashs , RAM MB_mbram , WLAN Hardware , WLAN 2.4Ghz , WLAN 5.0Ghz , Ethernet 100M ports_ , Ethernet Gbit ports_ , Modem , USB ports_  
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,Wireless LAN Hardware,Wireless 2.4GHz,Wireless 5.0GHz,100M ports,Gbit ports,Modem,USB 
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,
 +filter  : Brand=Netgear 
 +filter  : Model=WNDR3800 
 +---- 
 + 
 +<tabbox Hardware Details> 
 +---- datatemplatelist frumious ---- 
 +template: meta:template_hardwaredetails 
 +cols    : Brand, Model, Versions, Device Type, Availability, Comments_, Supported Since Rev, Supported since Rel, Supported current Rel,  Instruction Set, Sub Instruction Set, Bootloader, Platform, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, Detachable Antennas_, WLAN Comments_,  USB ports_, SATA ports_,  Serial, JTAG, Comments USB SATA ports_,LED count, Button count, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url 
 +filter  : Brand=Netgear 
 +filter  : Model=WNDR3800 
 +---- 
 + 
 +<tabbox Firmware Downloads> 
 +---- datatable ---- 
 +cols    : Model, Versions, LEDE Supported Current Rel_releasepage, Firmware LEDE Install URL_url, Firmware LEDE Upgrade URL_url, Firmware OEM Stock URL_url 
 +headers : Model, Versions, Current Release, LEDE Factory Image, LEDE Sysupgrade Image, OEM Firmware URL 
 +filter  : Brand=Netgear 
 +filter  : Model=WNDR3800 
 +---- 
 + 
 +<tabbox Links> 
 +---- datatemplatelist bandersnatch ---- 
 +template: meta:template_links  
 +cols    : Model, Versions, OWrt Forum Topic URL_url, LEDE Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Device Techdata_pageid 
 +filter  : Brand=Netgear 
 +filter  : Model=WNDR3800 
 +---- 
 +</tabbox> 
 +</WRAP> 
 + 
 + 
 +===== Getting and Flashing Firmware ===== 
 + 
 +  * Get firmware via the links shown above 
 +  * The [[docs:guide-quick-start:factory_installation|Standard Flashing Instructions]] work perfectly for this device. 
 +  * Factory firmware flash usually takes 5 or more minutes. You will know it has completed when xxx light starts flashing. 
 +  * //If the device requires additional steps or an alternative flashing processinclude that information here.//
  
-===== Photos ===== 
- (empty to start) 
  
 ===== Troubleshooting/Unbricking ===== ===== Troubleshooting/Unbricking =====
  
-(empty to start)+  * Refer to [[docs:guide-user:troubleshooting:failsafe_and_factory_reset|Failsafe Mode and Factory Reset]] 
 +  * [[faq:after_installation|Frequently Asked Questions: After installation]] 
 +  * [[docs:guide-user:uninstall|Uninstall LEDE]] (back to stock firmware) 
 +  * //Include other tips here// 
 + 
 + 
 +===== Other Information about the Device ===== 
 + //Include memory layouts, pinouts for RS-232/JTAG, etc. here// 
 + 
 +==== Photos ==== 
 + //Include photos of the router, board, RS-232 ports, etc. here// 
 + 
 +==== Boot Logs ==== 
 +//Empty in the basic Device Page template. May use the folded plugin so they don't occupy screen space unless the reader explicitly un-hides them.// 
 + 
 + 
 +===== Some examples for folded, hidden + outliner plugin ===== 
 + 
 +**My favourite:** hidden plugin. --- //[[tmo26@gmx.de|tmomas]] 2016/11/01 21:08// 
 + 
 +++ Bootlog | Folded plugin -> https://www.dokuwiki.org/plugin:folded\\ 
 +Doesn't work with %%<code>%% tags or %%<WRAP>%% :( 
 +++  
 + 
 +<hidden onHidden="Bootlog" onVisible="Hide bootlog" edit="any edit text">Hidden plugin -> [[https://www.dokuwiki.org/plugin:hidden]] 
 +<code>## Booting image at 81000000 ... 
 +   Image Name:   MIPS OpenWrt Linux-3.3.8 
 +   Created:      2012-11-26  17:01:44 UTC 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    4269201 Bytes =  4.1 MB 
 +   Load Address: 80060000 
 +   Entry Point:  80060000 
 +   Verifying Checksum at 0x81000040 ...OK 
 +   Uncompressing Kernel Image ... OK 
 +No initrd 
 +## Transferring control to Linux (at address 80060000) ... 
 +## Giving linux memsize in bytes, 67108864 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Linux version 3.3.8 (dzubey@Spartan) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #6 Mon Nov 26 10:01:28 MST 2012 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] SoC: Atheros AR9330 rev 1 
 +[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 04000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Zone PFN ranges: 
 +[    0.000000]   Normal   0x00000000 -> 0x00004000 
 +[    0.000000] Movable zone start PFN for each node 
 +[    0.000000] Early memory PFN ranges 
 +[    0.000000]     0: 0x00000000 -> 0x00004000 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +[    0.000000] Kernel command line:  board=DIR-505-A1 console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,1024k(kernel),6656k(rootfs),7680k@0x80000(firmware) rootfstype=squashfs,jffs2 noinitrd 
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) 
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 58492k/65536k available (2121k kernel code, 7044k reserved, 401k data, 3432k init, 0k highmem) 
 +[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS:51 
 +[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) 
 +[    0.080000] pid_max: default: 32768 minimum: 301 
 +[    0.080000] Mount-cache hash table entries: 512 
 +[    0.090000] NET: Registered protocol family 16 
 +[    0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79 
 +[    0.100000] MIPS: machine is D-Link DIR-505 A1 
 +[    0.350000] bio: create slab <bio-0> at 0 
 +[    0.360000] Switching to clocksource MIPS 
 +[    0.360000] NET: Registered protocol family 2 
 +[    0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) 
 +[    0.380000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) 
 +[    0.380000] TCP: Hash tables configured (established 2048 bind 2048) 
 +[    0.390000] TCP reno registered 
 +[    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.400000] NET: Registered protocol family 1 
 +[    6.810000] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    6.820000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    6.830000] msgmni has been set to 114 
 +[    6.830000] io scheduler noop registered 
 +[    6.830000] io scheduler deadline registered (default) 
 +[    6.840000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    6.840000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART 
 +[    6.850000] console [ttyATH0] enabled, bootconsole disabled 
 +[    6.850000] console [ttyATH0] enabled, bootconsole disabled 
 +[    6.870000] m25p80 spi0.0: found mx25l6405d, expected m25p80 
 +[    6.870000] m25p80 spi0.0: mx25l6405d (8192 Kbytes) 
 +[    6.880000] 8 cmdlinepart partitions found on MTD device spi0.0 
 +[    6.880000] Creating 8 MTD partitions on "spi0.0": 
 +[    6.890000] 0x000000000000-0x000000010000 : "u-boot" 
 +[    6.890000] 0x000000010000-0x000000020000 : "art" 
 +[    6.900000] 0x000000020000-0x000000030000 : "mac" 
 +[    6.900000] 0x000000030000-0x000000040000 : "nvram" 
 +[    6.910000] 0x000000040000-0x000000080000 : "language" 
 +[    6.910000] 0x000000080000-0x000000180000 : "kernel" 
 +[    6.920000] 0x000000180000-0x000000800000 : "rootfs" 
 +[    6.920000] mtd: partition "rootfs" set to be root filesystem 
 +[    6.930000] mtd: partition "rootfs_data" created automatically, ofs=6E0000, len=120000  
 +[    6.940000] 0x0000006e0000-0x000000800000 : "rootfs_data" 
 +[    6.940000] 0x000000080000-0x000000800000 : "firmware" 
 +[    6.970000] ag71xx_mdio: probed 
 +[    6.970000] eth0: Atheros AG71xx at 0xb9000000, irq 4 
 +[    7.530000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] 
 +[    7.540000] TCP cubic registered 
 +[    7.540000] NET: Registered protocol family 17 
 +[    7.540000] Bridge firewalling registered 
 +[    7.550000] 8021q: 802.1Q VLAN Support v1.8 
 +[    7.580000] Freeing unused kernel memory: 3432k freed 
 +- preinit - 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +[   10.530000] eth0: link up (100Mbps/Full duplex) 
 +- regular preinit - 
 +[   11.540000] eth0: link down 
 +- init - 
 +[   11.860000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 
 +[   11.860000] Backport based on wireless-testing.git master-2012-09-07 
 +[   11.870000] compat.git: wireless-testing.git 
 +[   11.900000] cfg80211: Calling CRDA to update world regulatory domain 
 +[   11.910000] cfg80211: World regulatory domain updated: 
 +[   11.910000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
 +[   11.920000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   11.930000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
 +[   11.940000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
 +[   11.950000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   11.950000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.030000] NET: Registered protocol family 10 
 +[   12.170000] usbcore: registered new interface driver usbfs 
 +[   12.170000] usbcore: registered new interface driver hub 
 +[   12.180000] usbcore: registered new device driver usb 
 +[   12.330000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 
 +[   12.340000] cfg80211: Calling CRDA for country: US 
 +[   12.340000] cfg80211: Regulatory domain changed to country: US 
 +[   12.340000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
 +[   12.350000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) 
 +[   12.360000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) 
 +[   12.370000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.380000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.380000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.390000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) 
 +[   12.470000] PPP generic driver version 2.4.2 
 +[   12.510000] tun: Universal TUN/TAP device driver, 1.6 
 +[   12.510000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
 +[   12.610000] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   12.780000] NET: Registered protocol family 24 
 +[   12.800000] nf_conntrack version 0.5.0 (967 buckets, 3868 max) 
 +[   13.320000] xt_time: kernel timezone is -0000 
 +[   13.760000] Netfilter messages via NETLINK v0.30. 
 +[   13.780000] Ebtables v2.0 registered 
 +[   14.030000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   14.270000] ctnetlink v0.93: registering with nfnetlink. 
 +[   14.420000] pwm: module license 'unspecified' taints kernel. 
 +[   14.430000] Disabling lock debugging due to kernel taint 
 +[   14.430000] pwm: Unknown symbol device_unregister (err 0) 
 +[   14.440000] pwm: Unknown symbol put_device (err 0) 
 +[   14.440000] pwm: Unknown symbol __class_register (err 0) 
 +[   14.450000] pwm: Unknown symbol device_create (err 0) 
 +[   14.450000] pwm: Unknown symbol sysfs_create_group (err 0) 
 +[   14.460000] pwm: Unknown symbol queue_work (err 0) 
 +[   14.460000] pwm: Unknown symbol __alloc_workqueue_key (err 0) 
 +[   14.470000] pwm: Unknown symbol class_find_device (err 0) 
 +[   14.510000] i2c /dev entries driver 
 +[   14.530000] gpio_pwm: Unknown symbol pwm_unregister (err 0) 
 +[   14.530000] gpio_pwm: Unknown symbol pwm_register (err 0) 
 +[   14.590000] usbcore: registered new interface driver usbserial 
 +[   14.600000] USB Serial support registered for generic 
 +[   14.600000] usbcore: registered new interface driver usbserial_generic 
 +[   14.610000] usbserial: USB Serial Driver core 
 +[   14.650000] Linux video capture interface: v2.00 
 +[   14.710000] USB Serial support registered for FTDI USB Serial Device 
 +[   14.720000] usbcore: registered new interface driver ftdi_sio 
 +[   14.720000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver 
 +[   14.750000] USB Serial support registered for pl2303 
 +[   14.750000] usbcore: registered new interface driver pl2303 
 +[   14.760000] pl2303: Prolific PL2303 USB to serial adaptor driver 
 +[   14.840000] fuse init (API version 7.18) 
 +[   14.870000] usbcore: registered new interface driver uvcvideo 
 +[   14.880000] USB Video Class driver (1.1.1) 
 + 
 +Please press Enter to activate this console. [   16.910000] ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[   16.910000] device eth0 entered promiscuous mode 
 +[   16.920000] ADDRCONF(NETDEV_UP): br-lan: link is not ready 
 +[   17.530000] eth0: link up (100Mbps/Full duplex) 
 +[   17.530000] br-lan: port 1(eth0) entered forwarding state 
 +[   17.540000] br-lan: port 1(eth0) entered forwarding state 
 +[   17.540000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   17.550000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   19.540000] br-lan: port 1(eth0) entered forwarding state</code></hidden> 
 + 
 + 
 +--> Bootlog# 
 +outliner plugin -> [[https://www.dokuwiki.org/plugin:outliner]] 
 +<code>## Booting image at 81000000 ... 
 +   Image Name:   MIPS OpenWrt Linux-3.3.8 
 +   Created:      2012-11-26  17:01:44 UTC 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    4269201 Bytes =  4.1 MB 
 +   Load Address: 80060000 
 +   Entry Point:  80060000 
 +   Verifying Checksum at 0x81000040 ...OK 
 +   Uncompressing Kernel Image ... OK 
 +No initrd 
 +## Transferring control to Linux (at address 80060000... 
 +## Giving linux memsize in bytes, 67108864 
 + 
 +Starting kernel ...
  
- =====Boot Logs ===== +[    0.000000] Linux version 3.3.8 (dzubey@Spartan) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #6 Mon Nov 26 10:01:28 MST 2012 
-(empty to start)+[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU revision is: 00019374 (MIPS 24Kc) 
 +[    0.000000] SoC: Atheros AR9330 rev 1 
 +[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 04000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Zone PFN ranges: 
 +[    0.000000]   Normal   0x00000000 -> 0x00004000 
 +[    0.000000] Movable zone start PFN for each node 
 +[    0.000000] Early memory PFN ranges 
 +[    0.000000]     0: 0x00000000 -> 0x00004000 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +[    0.000000] Kernel command line:  board=DIR-505-A1 console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,1024k(kernel),6656k(rootfs),7680k@0x80000(firmware) rootfstype=squashfs,jffs2 noinitrd 
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) 
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 58492k/65536k available (2121k kernel code, 7044k reserved, 401k data, 3432k init, 0k highmem) 
 +[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS:51 
 +[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) 
 +[    0.080000] pid_max: default: 32768 minimum: 301 
 +[    0.080000] Mount-cache hash table entries: 512 
 +[    0.090000] NET: Registered protocol family 16 
 +[    0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79 
 +[    0.100000] MIPS: machine is D-Link DIR-505 A1 
 +[    0.350000] bio: create slab <bio-0> at 0 
 +[    0.360000] Switching to clocksource MIPS 
 +[    0.360000] NET: Registered protocol family 2 
 +[    0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) 
 +[    0.380000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) 
 +[    0.380000] TCP: Hash tables configured (established 2048 bind 2048) 
 +[    0.390000] TCP reno registered 
 +[    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.400000] NET: Registered protocol family 1 
 +[    6.810000] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    6.820000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    6.830000] msgmni has been set to 114 
 +[    6.830000] io scheduler noop registered 
 +[    6.830000] io scheduler deadline registered (default) 
 +[    6.840000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    6.840000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART 
 +[    6.850000] console [ttyATH0] enabled, bootconsole disabled 
 +[    6.850000] console [ttyATH0] enabled, bootconsole disabled 
 +[    6.870000] m25p80 spi0.0: found mx25l6405d, expected m25p80 
 +[    6.870000] m25p80 spi0.0: mx25l6405d (8192 Kbytes) 
 +[    6.880000] 8 cmdlinepart partitions found on MTD device spi0.0 
 +[    6.880000] Creating 8 MTD partitions on "spi0.0": 
 +[    6.890000] 0x000000000000-0x000000010000 : "u-boot" 
 +[    6.890000] 0x000000010000-0x000000020000 : "art" 
 +[    6.900000] 0x000000020000-0x000000030000 : "mac" 
 +[    6.900000] 0x000000030000-0x000000040000 : "nvram" 
 +[    6.910000] 0x000000040000-0x000000080000 : "language" 
 +[    6.910000] 0x000000080000-0x000000180000 : "kernel" 
 +[    6.920000] 0x000000180000-0x000000800000 : "rootfs" 
 +[    6.920000] mtd: partition "rootfs" set to be root filesystem 
 +[    6.930000] mtd: partition "rootfs_data" created automatically, ofs=6E0000, len=120000  
 +[    6.940000] 0x0000006e0000-0x000000800000 : "rootfs_data" 
 +[    6.940000] 0x000000080000-0x000000800000 : "firmware" 
 +[    6.970000] ag71xx_mdio: probed 
 +[    6.970000] eth0: Atheros AG71xx at 0xb9000000, irq 4 
 +[    7.530000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] 
 +[    7.540000] TCP cubic registered 
 +[    7.540000] NET: Registered protocol family 17 
 +[    7.540000] Bridge firewalling registered 
 +[    7.550000] 8021q: 802.1Q VLAN Support v1.8 
 +[    7.580000] Freeing unused kernel memory: 3432k freed 
 +- preinit - 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +[   10.530000] eth0: link up (100Mbps/Full duplex) 
 +- regular preinit - 
 +[   11.540000] eth0: link down 
 +- init - 
 +[   11.860000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 
 +[   11.860000] Backport based on wireless-testing.git master-2012-09-07 
 +[   11.870000] compat.git: wireless-testing.git 
 +[   11.900000] cfg80211: Calling CRDA to update world regulatory domain 
 +[   11.910000] cfg80211: World regulatory domain updated: 
 +[   11.910000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
 +[   11.920000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   11.930000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
 +[   11.940000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
 +[   11.950000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   11.950000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.030000] NET: Registered protocol family 10 
 +[   12.170000] usbcore: registered new interface driver usbfs 
 +[   12.170000] usbcore: registered new interface driver hub 
 +[   12.180000] usbcore: registered new device driver usb 
 +[   12.330000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 
 +[   12.340000] cfg80211: Calling CRDA for country: US 
 +[   12.340000] cfg80211: Regulatory domain changed to country: US 
 +[   12.340000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
 +[   12.350000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) 
 +[   12.360000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) 
 +[   12.370000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.380000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.380000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
 +[   12.390000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) 
 +[   12.470000] PPP generic driver version 2.4.2 
 +[   12.510000] tun: Universal TUN/TAP device driver, 1.6 
 +[   12.510000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
 +[   12.610000] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   12.780000] NET: Registered protocol family 24 
 +[   12.800000] nf_conntrack version 0.5.0 (967 buckets, 3868 max) 
 +[   13.320000] xt_time: kernel timezone is -0000 
 +[   13.760000] Netfilter messages via NETLINK v0.30. 
 +[   13.780000] Ebtables v2.0 registered 
 +[   14.030000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   14.270000] ctnetlink v0.93: registering with nfnetlink. 
 +[   14.420000] pwm: module license 'unspecified' taints kernel. 
 +[   14.430000] Disabling lock debugging due to kernel taint 
 +[   14.430000] pwm: Unknown symbol device_unregister (err 0) 
 +[   14.440000] pwm: Unknown symbol put_device (err 0) 
 +[   14.440000] pwm: Unknown symbol __class_register (err 0) 
 +[   14.450000] pwm: Unknown symbol device_create (err 0) 
 +[   14.450000] pwm: Unknown symbol sysfs_create_group (err 0) 
 +[   14.460000] pwm: Unknown symbol queue_work (err 0) 
 +[   14.460000] pwm: Unknown symbol __alloc_workqueue_key (err 0) 
 +[   14.470000] pwm: Unknown symbol class_find_device (err 0) 
 +[   14.510000] i2c /dev entries driver 
 +[   14.530000] gpio_pwm: Unknown symbol pwm_unregister (err 0) 
 +[   14.530000] gpio_pwm: Unknown symbol pwm_register (err 0) 
 +[   14.590000] usbcore: registered new interface driver usbserial 
 +[   14.600000] USB Serial support registered for generic 
 +[   14.600000] usbcore: registered new interface driver usbserial_generic 
 +[   14.610000] usbserial: USB Serial Driver core 
 +[   14.650000] Linux video capture interface: v2.00 
 +[   14.710000] USB Serial support registered for FTDI USB Serial Device 
 +[   14.720000] usbcore: registered new interface driver ftdi_sio 
 +[   14.720000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver 
 +[   14.750000] USB Serial support registered for pl2303 
 +[   14.750000] usbcore: registered new interface driver pl2303 
 +[   14.760000] pl2303: Prolific PL2303 USB to serial adaptor driver 
 +[   14.840000] fuse init (API version 7.18) 
 +[   14.870000] usbcore: registered new interface driver uvcvideo 
 +[   14.880000] USB Video Class driver (1.1.1)
  
 +Please press Enter to activate this console. [   16.910000] ADDRCONF(NETDEV_UP): eth0: link is not ready
 +[   16.910000] device eth0 entered promiscuous mode
 +[   16.920000] ADDRCONF(NETDEV_UP): br-lan: link is not ready
 +[   17.530000] eth0: link up (100Mbps/Full duplex)
 +[   17.530000] br-lan: port 1(eth0) entered forwarding state
 +[   17.540000] br-lan: port 1(eth0) entered forwarding state
 +[   17.540000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 +[   17.550000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
 +[   19.540000] br-lan: port 1(eth0) entered forwarding state</code>
 +<--
  • Last modified: 2024/02/12 11:43
  • by 127.0.0.1