This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='firmware---ath10k-board-specific-overrides'

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug report Source code
firmware---ath10k-board-specific-overridesipq-wifi-mikrotik_hap-ac21libcThe Mikrotik hAP ac2 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Mikrotik hAP ac2.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-mikrotik_sxtsq-5-ac1libcThe MikroTik SXTsq 5 ac requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the MikroTik SXTsq 5 ac.

Do not install it for any other device!

3kB1kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac1libcThe Qxwlan E2600AC requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-nec_wg2600hp31libcThe NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the NEC Platforms WG2600HP3.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-glinet_gl-ap13001libcThe GL.iNet GL-AP1300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the GL.iNet GL-AP1300.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-glinet_gl-s13001libcThe GL.iNet GL-S1300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the GL.iNet GL-S1300.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-linksys_ea83001libcThe Linksys EA8300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Linksys EA8300.

Do not install it for any other device!

6kB6kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-linksys_mr8300-v01libcThe Linksys MR8300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Linksys MR8300.

Do not install it for any other device!

5kB4kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-8dev_habanero-dvk1libcThe 8devices Habanero DVK requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the 8devices Habanero DVK.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-aruba_ap-3031libcThe Aruba AP-303 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Aruba AP-303.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-avm_fritzrepeater-12001libcThe AVM FRITZRepeater 1200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the AVM FRITZRepeater 1200.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-buffalo_wtr-m2133hp1libcThe Buffalo WTR-M2133HP requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Buffalo WTR-M2133HP.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-cellc_rtl30vw1libcThe Cell C RTL30VW requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Cell C RTL30VW.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-devolo_magic-2-wifi-next1libcThe devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the devolo Magic 2 WiFi next.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-dlink_dap26101libcThe D-Link DAP-2610 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the D-Link DAP-2610.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-edgecore_ecw54101libcThe Edgecore ECW5410 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Edgecore ECW5410.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-edgecore_oap1001libcThe Edgecore OAP100 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Edgecore OAP100.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_eap22001libcThe EnGenius EAP2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EAP2200.

Do not install it for any other device!

5kB4kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_emd11libcThe EnGenius EMD1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EMD1.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-luma_wrtq-329acn1libcThe Luma WRTQ-329ACN requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Luma WRTQ-329ACN.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_emr35001libcThe EnGenius EMR3500 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EMR3500.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-ezviz_cs-w3-wd1200g-eup1libcThe EZVIZ CS-W3-WD1200G EUP requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EZVIZ CS-W3-WD1200G EUP.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-mobipromo_cm520-79f1libcThe MobiPromo CM520-79F requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the MobiPromo CM520-79F.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-plasmacloud_pa12001libcThe Plasma Cloud PA1200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Plasma Cloud PA1200.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-plasmacloud_pa22001libcThe Plasma Cloud PA2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Plasma Cloud PA2200.

Do not install it for any other device!

5kB4kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac-c21libcThe Qxwlan E2600AC C2 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC C2.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-teltonika_rutx1libcThe Teltonika RUTX requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Teltonika RUTX.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-aruba_ap-3651libcThe Aruba AP-365 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Aruba AP-365.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-p2w_r619ac1libcThe P&W R619AC requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the P&W R619AC.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-zte_mf286d1libcThe ZTE MF286D requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the ZTE MF286D.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-asus_rt-ac42u1libcThe ASUS RT-AC42U requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the ASUS RT-AC42U.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-glinet_gl-b22001libcThe GL.iNet GL-B2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the GL.iNet GL-B2200.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac-c11libcThe Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC C1.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-mobipromo_cm520-79f1libcpackages:pkgdata:ipq-wifi-mobipromo_cm520-79f, The MobiPromo CM520-79F requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the MobiPromo CM520-79F.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Bug reportspackages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Sources
firmware---ath10k-board-specific-overridesipq-wifi-asus_rt-ac42u1libcpackages:pkgdata:ipq-wifi-asus_rt-ac42u, The ASUS RT-AC42U requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the ASUS RT-AC42U.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-asus_rt-ac42u, Bug reportspackages:pkgdata:ipq-wifi-asus_rt-ac42u, Sources
firmware---ath10k-board-specific-overridesipq-wifi-devolo_magic-2-wifi-next1libcpackages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, The devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the devolo Magic 2 WiFi next.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Bug reportspackages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Sources
firmware---ath10k-board-specific-overridesipq-wifi-dlink_dap26101libcpackages:pkgdata:ipq-wifi-dlink_dap2610, The D-Link DAP-2610 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the D-Link DAP-2610.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-dlink_dap2610, Bug reportspackages:pkgdata:ipq-wifi-dlink_dap2610, Sources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_eap22001libcpackages:pkgdata:ipq-wifi-engenius_eap2200, The EnGenius EAP2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EAP2200.

Do not install it for any other device!

5kB4kBOpenWrt teampackages:pkgdata:ipq-wifi-engenius_eap2200, Bug reportspackages:pkgdata:ipq-wifi-engenius_eap2200, Sources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac-c11libcpackages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, The Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC C1.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Bug reportspackages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Sources
firmware---ath10k-board-specific-overridesipq-wifi-plasmacloud_pa12001libcpackages:pkgdata:ipq-wifi-plasmacloud_pa1200, The Plasma Cloud PA1200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Plasma Cloud PA1200.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-plasmacloud_pa1200, Bug reportspackages:pkgdata:ipq-wifi-plasmacloud_pa1200, Sources
firmware---ath10k-board-specific-overridesipq-wifi-aruba_ap-3651libcpackages:pkgdata:ipq-wifi-aruba_ap-365, The Aruba AP-365 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Aruba AP-365.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-aruba_ap-365, Bug reportspackages:pkgdata:ipq-wifi-aruba_ap-365, Sources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_emd11libcpackages:pkgdata:ipq-wifi-engenius_emd1, The EnGenius EMD1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EMD1.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-engenius_emd1, Bug reportspackages:pkgdata:ipq-wifi-engenius_emd1, Sources
firmware---ath10k-board-specific-overridesipq-wifi-teltonika_rutx1libcpackages:pkgdata:ipq-wifi-teltonika_rutx, The Teltonika RUTX requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Teltonika RUTX.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-teltonika_rutx, Bug reportspackages:pkgdata:ipq-wifi-teltonika_rutx, Sources
firmware---ath10k-board-specific-overridesipq-wifi-nec_wg2600hp31libcpackages:pkgdata:ipq-wifi-nec_wg2600hp3, The NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the NEC Platforms WG2600HP3.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-nec_wg2600hp3, Bug reportspackages:pkgdata:ipq-wifi-nec_wg2600hp3, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas