This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='network'

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicense MaintainerBug reportSource code
networknut-driver-clone2.7.4-27libc, nut, nut-serverUPS driver clone

46kB45kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-blazer_ser2.7.4-27libc, nut, nut-serverDriver for Megatec/Q1 protocol serial based UPS equipment

28kB27kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Best Power / SOLA (Phoenixtec protocol) UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestuferrups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Best Power Micro-Ferrups

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestfortress2.7.4-27libc, nut, nut-serverDriver for old Best Fortress UPS equipment

23kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestfcom2.7.4-27libc, nut, nut-serverDriver for Best Power Fortress/Ferrups

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-belkinunv2.7.4-27libc, nut, nut-serverDriver for Belkin “Universal UPS” and compatible

22kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-belkin2.7.4-27libc, nut, nut-serverDriver for Belkin serial UPS equipment

24kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bcmxcp2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for UPSes supporting the serial BCM/XCP protocol

31kB30kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-apcupsd-ups2.7.4-27libc, nut, nut-serverDriver for apcupsd client access

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-apcsmart-old2.7.4-27libc, nut, nut-serverDriver for American Power Conversion Smart Protocol UPS equipment

29kB28kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-al1752.7.4-27libc, nut, nut-serverDriver for Eltek UPS models with AL175 alarm module

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkmiredo1.2.6-3libc, librt, libpthread, kmod-tunMiredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD
operating systems. It includes functional implementations of all components of
the Teredo specification (client, relay and server). It is meant to provide
IPv6 connectivity even from behind NAT devices.

35kB34kBGPL-2.0-or-latercommon packages maintainersBug reportsSources
networknut-driver-optiups2.7.4-27libc, nut, nut-serverDriver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment

24kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-apcsmart2.7.4-27libc, nut, nut-serverDriver for American Power Conversion Smart Protocol UPS equipment

33kB33kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networksamba4-server4.18.8-1libc, samba4-libsinstalls: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec)
(samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db)

This provides the basic fileserver service and is the minimum needed to serve file shares.
HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/

243kB242kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-admin4.18.8-1libc, librt, libpthread, samba4-libsinstalls: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm
ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch
tdbbackup tdbdump tdbrestore tdbtool

Administration tools collection

842kB847kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networkfoolsm1.0.13-2libc, msmtpfoolsm is a link state monitor for carrying out actions when a link
transistions from the up to down state or vice versa.

30kB29kBGPL-2.0-onlycommon packages maintainersBug reportsSources
networksctp-tools1.0.19-1libc, libsctpSCTP user-land tools

33kB33kBGPL-2.0common packages maintainersBug reportsSources
networkpen0.34.1-3libc, libopenssl1.1This is pen, a load balancer for “simple” TCP based protocols
such as HTTP or SMTP. It allows several servers to appear as
one to the outside and automatically detects servers that are
down and distributes clients among the available servers.
This gives high availability and scalable performance.

52kB51kBGPL-2.0-or-latercommon packages maintainersBug reportsSources
networknut2.7.4-27libcNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.

0kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-web-cgi2.7.4-27libc, librt, libpthread, nut, nut-common, libgdThe CGI programs are clients that run through your web server.
They allow you to see UPS status and perform certain administrative
commands from any web browser. Javascript and cookies are not required.

42kB41kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upssched2.7.4-27libc, nut, nut-common, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upssched was created to allow users to execute programs at times relative
to events being monitored by upsmon. The original purpose was to allow
for a shutdown to occur after some fixed period on battery, but there are
other uses that are possible.
You can alternatively write your own script and save some space.

14kB13kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsrw2.7.4-27libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsrw allows you to view and change the read/write variables inside your
UPS. It sends commands via the upsd to your driver, which configures the
hardware for you. The list of variables that allow you to change their
values is based on the capabilities of your UPS equipment. Not all
models support this feature. Typically, cheaper hardware does not
support any of them.

11kB10kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsmon2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon is the client process that is responsible for the most important
part of UPS monitoring--shutting down the system when the power goes
out. It can call out to other helper programs for notification purposes
during power events. upsmon can monitor multiple systems using a single
process. Every UPS that is defined in the upsmon.conf configuration file
is assigned a power value and a type (slave or master).

21kB20kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsmon-sendmail-notify2.7.4-27libc, nut, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon with default notification via sendmail

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upslog2.7.4-27libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upslog is a daemon that will poll a UPS at periodic intervals, fetch the
variables that interest you, format them, and write them to a file.

10kB9kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upscmd2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upscmd allows you to invoke “instant commands” in your UPS hardware. Not
all hardware supports this, so check the list with -l to see if anything
will work on your equipment. On hardware that supports it, you can use
this program to start and stop battery tests, invoke a front panel test
(beep!), turn the load on or off, and more.

9kB8kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsc2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsc is provided as a quick way to poll the status of a UPS server. It
can be used inside shell scripts and other programs that need UPS data
but do not want to include the full interface.

8kB7kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-server2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsd is responsible for serving the data from the drivers to the
clients. It connects to each driver and maintains a local cache of the
current state. Queries from the clients are served from this cache, so
delays are minimal. This program is essential, and must be running at
all times to actually make any use out of the drivers and clients.

47kB46kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-usbhid-ups2.7.4-27libc, nut, nut-serverDriver for USB/HID UPS equipment

54kB53kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplite_usb2.7.4-27libc, nut, nut-serverDriver for older Tripp Lite USB UPSes (not PDC HID)


29kB28kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-riello_usb2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Riello UPS Protocol UPS equipment via USB

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-richcomm_usb2.7.4-27libc, nut, nut-serverDriver for UPS equipment using Richcomm dry-contact to USB solution

22kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-nutdrv_qx2.7.4-27libc, nut, nut-serverDriver for Q* protocol serial and USB based UPS equipment

64kB65kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-nutdrv_atcl_usb2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for ATCL FOR UPS equipment

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-blazer_usb2.7.4-27libc, nut, nut-serverDriver for Megatec/Q1 protocol USB based UPS equipment

28kB27kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bcmxcp_usb2.7.4-27libc, nut, nut-serverExperimental driver for UPSes supporting the BCM/XCP protocol over USB

37kB36kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-common2.7.4-27libc, librt, libpthread, nut, libusb-compat4, libneonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
This package contains the common files.

15kB14kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-avahi-service2.7.4-27libc, librt, libpthread, nut, avahi-daemonThis package contains the service definition for announcing the
attached UPS via mDNS/DNS-SD.

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkjool-tools4.1.5-1libc, libnl200, libxtables12Jool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

122kB121kBGPL-2.0-onlycommon packages maintainersBug reportsSources
networkiptraf-ng1.1.4-1libc, libncurses6iptraf-ng is a console-based network statistics utility for Linux. It gathers a
variety of figures such as TCP connection packet and byte counts, interface
statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN
station packet and byte counts.

71kB70kBGPL-2.0common packages maintainersBug reportsSources
networkcifsmount6.11-2libc, kmod-fs-cifsCIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkpppossh2libc, librt, libpthread, ppp, resolveipThis package adds protocol support for PPP over SSH. The protocol name is
'pppossh' as in netifd interface config option 'proto'.

1kB0kBGPLv2Yousong ZhouBug reportsSources
networksmartsnmpd2014-08-13-fb93473d89..98dlibc, libssp, lua, liblua, libubox, libuci-lua, libubus-luasmartsnmpd is an implementation of SNMP Agent. Its goal is “Easily
writing boring SNMP MIB with Lua”. This package add native support
for OpenWrt. Include using ubus and uci to get system info/status.
And, it use libubox/uloop as low level event-driven library.

19kB18kBGPL-2.0Xiongfei GuoBug reportsSources
networkscapy2.4.5-1libc, librt, libpthread, python3packages:pkgdata:scapy, Scapy is a powerful interactive packet manipulation program built on top
of the Python interpreter. It can be used to forge or decode packets of
a wide number of protocols, send them over the wire, capture them, match
requests and replies, and much more.

1631kB1645kBGPL-2.0-onlyW. Michael Petullopackages:pkgdata:scapy, Bug reportspackages:pkgdata:scapy, Sources
networknfdump1.6.24-1libc, libbz2-1.0, musl-ftspackages:pkgdata:nfdump, NetFlow collecting and processing tools

179kB179kBBSD-3-ClauseW. Michael Petullopackages:pkgdata:nfdump, Bug reportspackages:pkgdata:nfdump, Sources
networkdmapd0.0.86-1libc, libdmapsharing, libdb47, vips, libgst1pbutilspackages:pkgdata:dmapd, Dmapd is a DMAP server

49kB48kBGPL-2.0-or-laterW. Michael Petullopackages:pkgdata:dmapd, Bug reportspackages:pkgdata:dmapd, Sources
networkscapy-src2.4.5-1libcScapy is a powerful interactive packet manipulation program built on top
of the Python interpreter. It can be used to forge or decode packets of
a wide number of protocols, send them over the wire, capture them, match
requests and replies, and much more.

This package contains the Python source files for scapy.

1059kB1070kBGPL-2.0-onlyW. Michael PetulloBug reportsSources
networknfdump1.6.24-1libc, libbz2-1.0, musl-ftsNetFlow collecting and processing tools

179kB179kBBSD-3-ClauseW. Michael PetulloBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas