This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='network'

CategoryNameVersionDependencies...........................................Description........................................... File sizeInstalled sizeLicenseMaintainerBug reportSource code
networkbwping2.5-1libcBWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

8kB7kBBSD-2-ClauseOleg DerevenetzBug reportsSources
networkgnunet-curl0.17.5-4libc, gnunet, libgnurl, jansson4GNUnet cURL wrapper component

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkcshark2020-07-22-c0d32fb6-2libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210CloudShark capture tool

8kB7kBBSD-2-ClauseLuka PerkovBug reportsSources
networkulogd-mod-sqlite2.0.7-6libc, ulogd, libsqlite3-0Output plugin for logging to an SQLite database

8kB7kBGPL-2.0-onlyAlexandru ArdeleanBug reportsSources
networkulogd-mod-pgsql2.0.7-6libc, ulogd, libpqOutput plugin for logging to a PostgreSQL database

8kB7kBGPL-2.0-onlyAlexandru ArdeleanBug reportsSources
networkulogd-mod-nfct2.0.7-6libc, ulogd, libnetfilter-conntrack3Input plugin for flow-based logging (conntracking)

8kB7kBGPL-2.0-onlyAlexandru ArdeleanBug reportsSources
networkuclient-fetch2023-04-13-007d9454-1libc, libuclient20201210Tiny wget replacement using libuclient

8kB7kBISCFelix FietkauBug reportsSources
networknut-upsc2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsc is provided as a quick way to poll the status of a UPS server. It
can be used inside shell scripts and other programs that need UPS data
but do not want to include the full interface.

8kB7kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkmikrotik-btest0.5.1-1libc, libpthread, librtA bandwidth test client compatible with Mikrotik's RouterOS BTest server.

8kB7kBGPLv3Roger Pueyo CentellesBug reportsSources
networkgnunet-social-pgsql0.10.2-git-20180205-b..7-1libc, libssp, gnunet, gnunet-pgsql, gnunet-socialGNUnet PostgreSQL social plugin

8kB8kBGPL-3.0Daniel GolleBug reportsSources
networkgnunet-namestore-fcfsd0.17.5-4libc, gnunet, gnunet-rest, libmicrohttpd-sslGNUnet first-come-first-serve registration server

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns-pgsql0.17.5-4libc, gnunet, gnunet-pgsql, gnunet-gnsGNUnet PostgreSQL GNS plugins

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns-flat0.17.5-4libc, librt, libpthread, gnunet, gnunet-gnsGNUnet flat storage GNS plugins

8kB8kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-dhtcache-sqlite0.17.5-4libc, gnunet, gnunet-sqliteGNUnet libsqlite3 dhtcache plugin

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkiperf2.1.3-1libc, libstdcpp6, libpthreadpackages:pkgdata:iperf, Iperf is a modern alternative for measuring TCP and UDP bandwidth
performance, allowing the tuning of various parameters and
characteristics.

79kB78kBBSD-3-ClauseFelix Fietkaupackages:pkgdata:iperf, Bug reportspackages:pkgdata:iperf, Sources
networkiperf2.1.3-1libc, libstdcpp6, libpthreadIperf is a modern alternative for measuring TCP and UDP bandwidth
performance, allowing the tuning of various parameters and
characteristics.

79kB78kBBSD-3-ClauseFelix FietkauBug reportsSources
networkcni-route-override0.1-1libcpackages:pkgdata:cni-route-override, route-override IPAM works as meta CNI plugin to override IP route given by previous CNI plugins.

777kB777kBApache-2.0Oskari Rautapackages:pkgdata:cni-route-override, Bug reportspackages:pkgdata:cni-route-override, Sources
networkcni-route-override0.1-1libcroute-override IPAM works as meta CNI plugin to override IP route given by previous CNI plugins.

777kB777kBApache-2.0Oskari RautaBug reportsSources
networkvnstat1.18-3libcvnStat is a network traffic monitor for Linux that keeps a log of daily
network traffic for the selected interface(s). vnStat isn't a packet
sniffer. The traffic information is analyzed from the /proc -filesystem,
so vnStat can be used without root permissions.

76kB75kBJo-Philipp WichBug reportsSources
networklispd0.4-2libc, libssp, librt, libopenssl, confuse, kmod-tun, uciThis packet provides support for the Locator-ID Separation Protocol.

76kB75kBGPLv2Vasileios LakafosisBug reportsSources
networkboinc7.16.16-1libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlibpackages:pkgdata:boinc, The Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

759kB759kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,packages:pkgdata:boinc, Bug reportspackages:pkgdata:boinc, Sources
networkboinc7.16.16-1libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlibThe Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

759kB759kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,Bug reportsSources
networkobfsproxy0.2.13-1libc, libssp, python-light, python-crypto, python-pyptlib, python-setuptools, python-yaml, twistedobfsproxy is a tool that attempts to circumvent censorship, by
transforming the Tor traffic between the client and the bridge. This
way, censors, who usually monitor traffic between the client and the
bridge, will see innocent-looking transformed traffic instead of the
actual Tor traffic.

73kB72kBBSD-3-ClauseJeffery ToBug reportsSources
networkmosquitto-client-ssl2.0.17-1libc, librt, libcares, cjson, libmosquitto-sslCommand line client tools for working with mosquitto.
This includes mosquitto_sub, mosquitto_pub, mosquitto_rr
and the mosquitto_ctrl tool.
This package is built with SSL support

73kB72kBEPL-2.0Karl PalssonBug reportsSources
networkUDPspeeder20210116.0-3libc, libstdcpp6, librt, libatomic1A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction,for All Traffics(TCP/UDP/ICMP)

72kB71kBMITNishant SharmaBug reportsSources
networkiptraf-ng1.1.4-1libc, libncurses6packages:pkgdata:iptraf-ng, iptraf-ng is a console-based network statistics utility for Linux. It gathers a
variety of figures such as TCP connection packet and byte counts, interface
statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN
station packet and byte counts.

71kB70kBGPL-2.0common packages maintainerspackages:pkgdata:iptraf-ng, Bug reportspackages:pkgdata:iptraf-ng, Sources
networkiptraf-ng1.1.4-1libc, libncurses6iptraf-ng is a console-based network statistics utility for Linux. It gathers a
variety of figures such as TCP connection packet and byte counts, interface
statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN
station packet and byte counts.

71kB70kBGPL-2.0common packages maintainersBug reportsSources
networkgnunet-sqlite0.17.5-4libc, gnunet, libsqlite3-0packages:pkgdata:gnunet-sqlite, GNUnet libsqlite3 backend

7kB6kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-sqlite, Bug reportspackages:pkgdata:gnunet-sqlite, Sources
networkgnunet-fs-pgsql0.17.5-4libc, gnunet, gnunet-pgsql, gnunet-datastorepackages:pkgdata:gnunet-fs-pgsql, GNUnet PostgreSQL filesharing plugin

7kB6kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-fs-pgsql, Bug reportspackages:pkgdata:gnunet-fs-pgsql, Sources
networkgnunet-fs-mysql0.17.5-4libc, gnunet, gnunet-mysql, gnunet-datastorepackages:pkgdata:gnunet-fs-mysql, GNUnet mySQL filesharing plugins

7kB6kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-fs-mysql, Bug reportspackages:pkgdata:gnunet-fs-mysql, Sources
networkpppoe-discovery2.4.9.git-2021-01-04-3libc, ppp-mod-pppoepackages:pkgdata:pppoe-discovery, This tool performs the same discovery process as pppoe, but does
not initiate a session. Can be useful to debug pppoe.

7kB6kBBSD-4-ClauseFelix Fietkaupackages:pkgdata:pppoe-discovery, Bug reportspackages:pkgdata:pppoe-discovery, Sources
networkuradvd2021-09-14-9b0da60e-2libcAdvertise an IPv6 prefix/route via SLAAC.

7kB6kBBSD-2-ClauseMoritz WarningBug reportsSources
networksafe-search2.0.1-10libcThis package prevents adult content from appearing in search results by
configuring dnsmasq to force all devices on your network to use Google and
Bing's Safe Search IP addresses. This is designed to be approperiate for most
businesses and families. The default filtering rules do not interfere with
normal web browsing.

7kB6kBMITGregory L. DietscheBug reportsSources
networklibndp1.7-1libcLibrary for Neighbor Discovery Protocol

7kB6kBLGPL-2.1Thomas Guyot-SionnestBug reportsSources
networkgnunet-fuse0.16.0-1libc, gnunet, gnunet-fs, libfuse1GNUnet filesystem mount via FUSE

7kB7kBGPL-3.0Daniel GolleBug reportsSources
networku2pnpd0.5-3libc, libupnpThis tools announces a device via UPnP on the local network, thus it is possible
to find it within the network neightboorhood of a well-known OS and the user
can easily double-click on an icon to open the web frontend of this device without
knowing the IP address.

7kB6kBGPL-2.0-onlyMichael HeimpoldBug reportsSources
networkpppoe-discovery2.4.9.git-2021-01-04-3libc, ppp-mod-pppoeThis tool performs the same discovery process as pppoe, but does
not initiate a session. Can be useful to debug pppoe.

7kB6kBBSD-4-ClauseFelix FietkauBug reportsSources
networkppp-mod-pppoa2.4.9.git-2021-01-04-3libc, linux-atm, kmod-pppoaThis package contains a PPPoA (PPP over ATM) plugin for ppp.

7kB6kBBSD-4-ClauseFelix FietkauBug reportsSources
networkpagekitec0.91.201110C-2libc, librt, libpthread, libpagekitePageKite is a system for running publicly visible servers (generally
web servers) on machines without a direct connection to the Internet,
such as mobile devices or computers behind restrictive firewalls.
PageKite works around NAT, firewalls and IP-address limitations by
using a combination of tunnels and reverse proxies.

This package provides an implementation of the PageKite Protocol in C,
optimized for high-performance or embedded applications.


This package contains a basic backend useful for exposing http/ssh servers.

Basic UCI support for configuring this backend is also included.

7kB6kBApache-2.0Karl PalssonBug reportsSources
networkminimalist-pcproxy2014-12-12-2d6d1b0b-7libc, libubox20220515This package contains a daemon which can be used to forward
PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.

In and of itself, it is not very useful, but combined with hnetd+miniupnpd
it allows for control of NAT forwarding and firewall pinholes from multiple
hops away.

7kB6kBBSD-3-ClauseMarkus StenbergBug reportsSources
networkmap7libc, kmod-ip6-tunnel, libubox20220515, libubus20220601, iptables-mod-conntrack-extra, kmod-nat46Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and
Lightweight 4over6 (RFC7596) in /etc/config/network.
MAP combines address and port translation with the tunneling
of IPv4 packets over an IPv6 network

7kB7kBGPL-2.0Hans DedeckerBug reportsSources
networkmac-telnet-ping2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

7kB6kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkiputils-tracepath20211215-1libctrace network path to a host, discovering PMTU

7kB6kBBSD-3-ClauseNoah MeyerhansBug reportsSources
networkiputils-tftpd20210202-1libc, librt, libpthreadTrivial File Transfer Protocol server

7kB6kBBSD-3-ClauseNoah MeyerhansBug reportsSources
networkgnunet-sqlite0.17.5-4libc, gnunet, libsqlite3-0GNUnet libsqlite3 backend

7kB6kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs-pgsql0.17.5-4libc, gnunet, gnunet-pgsql, gnunet-datastoreGNUnet PostgreSQL filesharing plugin

7kB6kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs-mysql0.17.5-4libc, gnunet, gnunet-mysql, gnunet-datastoreGNUnet mySQL filesharing plugins

7kB6kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-messenger0.17.5-4libc, gnunetpackages:pkgdata:gnunet-messenger, GNUnet group chat messenger

68kB67kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-messenger, Bug reportspackages:pkgdata:gnunet-messenger, Sources
networkgnunet-messenger0.17.5-4libc, gnunetGNUnet group chat messenger

68kB67kBAGPL-3.0Daniel GolleBug reportsSources
networkgolang-gitlab-yawning-obfs4-dev0.0.14-1libcpackages:pkgdata:golang-gitlab-yawning-obfs4-dev, obfs4proxy is a tool that attempts to circumvent censorship by
transforming the Tor traffic between the client and the bridge. This way
censors, who usually monitor traffic between the client and the bridge,
will see innocent-looking transformed traffic instead of the actual Tor
traffic.

obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4.

It is written in Go and is compliant with the Tor pluggable transports
specification, and its modular architecture allows it to support
multiple pluggable transports.

This package provides the source files for the client/bridge program.

65kB64kBBSD-2-Clause GPL-3.0-or-laterJeffery Topackages:pkgdata:golang-gitlab-yawning-obfs4-dev, Bug reportspackages:pkgdata:golang-gitlab-yawning-obfs4-dev, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas