This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='network---routing-and-redirection'

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug reportSource code
network---routing-and-redirectionfrr-bfdd8.2.0-1libc, frr, frr-libfrrpackages:pkgdata:frr-bfdd, bfdd routing engine

65kB65kBGPL-2.0-only LGPL-2.1-onlyLucian Cristianpackages:pkgdata:frr-bfdd, Bug reportspackages:pkgdata:frr-bfdd, Sources
network---routing-and-redirectionfrr-babeld8.2.0-1libc, frr, frr-libfrrpackages:pkgdata:frr-babeld, babeld routing engine

55kB55kBGPL-2.0-only LGPL-2.1-onlyLucian Cristianpackages:pkgdata:frr-babeld, Bug reportspackages:pkgdata:frr-babeld, Sources
network---routing-and-redirectionfrr-pythontools8.2.0-1libc, frr, frr-libfrr, python3-base, python3-light, python3-loggingPython reload tool

22kB21kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-pathd8.2.0-1libc, frr, frr-libfrrpathd routing engine

39kB39kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectiontc-bpf5.15.0-4libc, kmod-sched-core, libmnl0, libbpf20220308Traffic control utility (bpf)

176kB175kBGPL-2.0Russell SeniorBug reportsSources
network---routing-and-redirectionudp-broadcast-relay-redux2021-04-05-67137293-1libcThis program listens for packets on a specified UDP broadcast port.
When a packet is received, it sends that packet to all specified interfaces but
the one it came from as though it originated from the original sender.
The primary purpose of this is to allow games on machines on separated
local networks (Ethernet, WLAN) that use udp broadcasts to find each other to do so.
It also works on ppp links, so you can log in from windows boxes (e.g. using pptp)
and play LAN-based games together. Currently, you have to care about upcoming or
downgoing interfaces yourself.

6kB5kBGPL-2.0common packages maintainersBug reportsSources
network---routing-and-redirectiontc-tiny5.15.0-4libc, kmod-sched-core, libmnl0Traffic control utility (minimal)

166kB165kBGPL-2.0Russell SeniorBug reportsSources
network---routing-and-redirectiontc-mod-iptables5.15.0-4libc, libxtables12, libbpf20220308Traffic control module - iptables action

4kB3kBGPL-2.0Russell SeniorBug reportsSources
network---routing-and-redirectiontc-full5.15.0-4libc, kmod-sched-core, libmnl0, libbpf20220308, libxtables12, tc-mod-iptablesTraffic control utility (full)

175kB174kBGPL-2.0Russell SeniorBug reportsSources
network---routing-and-redirectionolsrd-utils2022-03-18-1e771b4d-3libc, librt, libpthread, olsrdUtils for OLSRD

1kB1kBBSD-3-ClauseSaverio ProtoBug reportsSources
network---routing-and-redirectionolsrd-mod-filtergw2022-03-18-1e771b4d-3libc, olsrdFilter Gateway plugin

3kB2kBBSD-3-ClauseSaverio ProtoBug reportsSources
network---routing-and-redirectionmrmctl1.1.0-1libc, kmod-macremapperCommand-line utility to manually manipulate the macremapper kernel module

5kB4kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectionfrr8.2.0-1libc, librtFRRouting is free software that implements and manages various IPv4 and IPv6
routing protocols.

Currently FRRouting supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, RIPng,
IS-IS, PIM-SM/MSDP, LDP, VRRP and Babel as well as very early support for EIGRP and
NHRP.

4kB3kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-zebra8.2.0-1libc, frr, frr-libfrrZebra daemon

432kB436kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-watchfrr8.2.0-1libc, frr, frr-libfrrfrr watchdog

18kB17kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-vtysh8.2.0-1libc, frr, frr-libfrr, libreadline8, libncurses6, moreintegrated shell for frr routing software

185kB191kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-vrrpd8.2.0-1libc, frr, frr-libfrrvrrpd routing engine

39kB40kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-staticd8.2.0-1libc, frr, frr-libfrrstaticd routing engine

32kB32kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-ripngd8.2.0-1libc, frr, frr-libfrrripngd routing engine

48kB49kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-ripd8.2.0-1libc, frr, frr-libfrrripd routing engine

61kB63kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-pimd8.2.0-1libc, frr, frr-libfrrpimd routing engine

252kB256kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-pbrd8.2.0-1libc, frr, frr-libfrrpbrd routing engine

35kB35kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-ospf6d8.2.0-1libc, frr, frr-libfrrospf6d routing engine

201kB204kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-ldpd8.2.0-1libc, frr, frr-libfrrldpd routing engine

113kB113kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-isisd8.2.0-1libc, frr, frr-libfrrisisd routing engine

222kB223kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-fabricd8.2.0-1libc, frr, frr-libfrrfabricd routing engine

183kB184kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-eigrpd8.2.0-1libc, frr, frr-libfrreigrpd routing engine

60kB60kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-bfdd8.2.0-1libc, frr, frr-libfrrbfdd routing engine

65kB65kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectiondcwapd1.1.0-4libc, libstdcpp6, kmod-macremapper, libdcwsocket, libdcwproto, mrmctl, libuci20130104Implementation of the Dual-Channel WiFi AP daemon

68kB67kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectionfrr-bgpd8.2.0-1libc, frr, frr-libfrrbgpd routing engine

721kB725kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionbird2cl2.13.1-1libc, bird2BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2c2.13.1-1libc, bird2, libreadline8, libncurses6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

10kB9kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird22.13.1-1libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

349kB349kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird1cl-ipv41.6.8-2libc, bird1-ipv4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1c-ipv41.6.8-2libc, libreadline8, libncurses6, bird1-ipv4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


10kB9kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv41.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


216kB215kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbfdd2019-08-22-c54534be-4libc, libevent2-7, libjson-c5A port of Cumulus BFD daemon to a more portable daemon.

Bidirectional Forwarding Detection (BFD) is a network protocol that is used to
detect faults between two forwarding engines connected by a link. It provides
low-overhead detection of faults even on physical media that doesn't support
failure detection of any kind, such as Ethernet, virtual circuits, tunnels and
MPLS Label Switched Paths.

27kB26kBGPL-2.0-or-laterLucian CristianBug reportsSources
network---routing-and-redirectiondcstad1.1.0-1libc, librt, libpthread, libdcwsocket, libdcwprotoImplementation of the Dual-Channel WiFi client daemon

6kB5kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectionbird1cl-ipv61.6.8-2libc, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1c-ipv61.6.8-2libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv61.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


241kB240kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionfrr-libfrr8.2.0-1libc, frr, librt, libatomic1, libcap, libjson-c5, libyangzebra library

474kB482kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv60.3-5libc, luci-base, luci-compat, bird1-ipv6-uciLuCI support for BIRD (v1.6) (IPv6)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv40.3-5libc, luci-base, luci-compat, bird1-ipv4-uciLuCI support for BIRD (v1.6) (IPv4)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv6-uci0.3-5libc, libuci20130104, uci, bird1-ipv6The BIRD UCI module (v1.6) (IPv6)

6kB5kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv4-uci0.3-5libc, libuci20130104, uci, bird1-ipv4The BIRD UCI module (v1.6) (IPv4)

7kB6kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionfrr-nhrpd8.2.0-1libc, frr, frr-libfrr, libcaresnhrpd routing engine

60kB60kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-ospfd8.2.0-1libc, frr, frr-libfrrospfd routing engine

330kB333kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-babeld8.2.0-1libc, frr, frr-libfrrbabeld routing engine

55kB55kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionyggdrasil0.4.3-1libc, kmod-tun, dkjson, libuci-luaYggdrasil builds end-to-end encrypted networks with IPv6.
Beyond the similarities with cjdns is a different routing
algorithm. This globally-agreed spanning tree uses greedy
routing in a metric space. Back-pressure routing techniques
allow advanced link aggregation bonding on per-stream basis.
In turn, a single stream will span across multiple network
interfaces simultaneously with much greater throughput.

3000kB3005kBLGPL-3.0-onlyWilliam FleurantBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas