This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='network'

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug report Source code
networkvpn-policy-routing0.3.4-8libc, jshn, ipset, iptables, resolveip, kmod-ipt-ipset, iptables-mod-ipopt, ip-fullThis service allows policy-based routing for L2TP, Openconnect, OpenVPN, PPTP and Wireguard tunnels and WAN interface.
Policies can specify domains, local IPs/subnets and ports, as well as remote IPs/subnets and ports.

14kB13kBGPL-3.0-or-laterStan GrishinBug reportsSources
networkvpnbypass1.3.2-1libc, librt, libpthread, ipset, iptablesThis service can be used to enable simple VPN split tunnelling.
Supports accessing domains, IP ranges outside of your VPN tunnel.
Also supports dedicating local ports/IP ranges for direct
internet access (outside of your VPN tunnel).
Please see the README for further information.

3kB2kBGPL-3.0-or-laterStan GrishinBug reportsSources
networkxray-geodata1.4.5-1libc, xray-coreXray, Penetrates Everything. It helps you to build your own computer network.
It secures your network connections and thus protects your privacy.

This includes GEO datas used for xray-core.

2488kB3263kBMPL-2.0Tianling ShenBug reportsSources
networkgenerate-ipv6-address0.1-3libc, librt, libpthreadGenerates IPv6 addresses from a given prefix and either a given MAC-48
address (an Ethernet hardware address) or a randomly drawn host number.

3kB2kBMITNick HainkeBug reportsSources
networkgenerate-ipv6-address0.1-3libc, librt, libpthreadpackages:pkgdata:generate-ipv6-address, Generates IPv6 addresses from a given prefix and either a given MAC-48
address (an Ethernet hardware address) or a randomly drawn host number.

3kB2kBMITNick Hainkepackages:pkgdata:generate-ipv6-address, Bug reportspackages:pkgdata:generate-ipv6-address, Sources
networkmiredo1.2.6-3libc, librt, libpthread, kmod-tunMiredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD
operating systems. It includes functional implementations of all components of
the Teredo specification (client, relay and server). It is meant to provide
IPv6 connectivity even from behind NAT devices.

35kB34kBGPL-2.0-or-latercommon packages maintainersBug reportsSources
networkmiredo1.2.6-3libc, librt, libpthread, kmod-tunpackages:pkgdata:miredo, Miredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD
operating systems. It includes functional implementations of all components of
the Teredo specification (client, relay and server). It is meant to provide
IPv6 connectivity even from behind NAT devices.

35kB34kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:miredo, Bug reportspackages:pkgdata:miredo, Sources
networktayga0.9.2-3libc, ip, kmod-tunTAYGA is an out-of-kernel stateless NAT64 implementation for
Linux. It uses the TUN driver to exchange packets with the
kernel, which is the same driver used by OpenVPN and QEMU/KVM.

20kB19kBGPL-2.0Ondrej CaletkaBug reportsSources
networktayga0.9.2-3libc, ip, kmod-tunpackages:pkgdata:tayga, TAYGA is an out-of-kernel stateless NAT64 implementation for
Linux. It uses the TUN driver to exchange packets with the
kernel, which is the same driver used by OpenVPN and QEMU/KVM.

20kB19kBGPL-2.0Ondrej Caletkapackages:pkgdata:tayga, Bug reportspackages:pkgdata:tayga, Sources
networklibavahi-dbus-support0.8-8libc, dbusAvahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
implementation (library). It facilitates
service discovery on a local network -- this means that
you can plug your laptop or computer into a network and
instantly be able to view other people who you can chat with,
find printers to print to or find files being shared.
This kind of technology is already found in MacOS X
(branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
and is very convenient.
.
The libavahi package contains the mDNS/DNS-SD shared libraries,
used by other programs. Specifically, it provides
libavahi-core and libavahi-common libraries.
.
The libavahi-dbus-support package enables
D-Bus support in avahi, needed to support
the libavahi-client library and avahi-utils.
.
Selecting this package modifies the build configuration
so that avahi packages are built with support for D-BUS enabled;
it does not generate a separate binary of its own.
It also automatically adds the D-Bus package to the build.
libavahi-dbus-support is selected automatically if you select
libavahi-client or avahi-utils.

80kB79kBLGPL-2.1-or-laterTed HessBug reportsSources
networklibavahi-nodbus-support0.8-8libc, libpthreadAvahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
implementation (library). It facilitates
service discovery on a local network -- this means that
you can plug your laptop or computer into a network and
instantly be able to view other people who you can chat with,
find printers to print to or find files being shared.
This kind of technology is already found in MacOS X
(branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
and is very convenient.
.
The libavahi package contains the mDNS/DNS-SD shared libraries,
used by other programs. Specifically, it provides
libavahi-core and libavahi-common libraries.
.
Selecting this package modifies the build configuration
so that avahi packages are built without support for D-BUS enabled;
it does not generate a separate binary of its own.

80kB79kBLGPL-2.1-or-laterTed HessBug reportsSources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton GlukhovBug reportsSources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3packages:pkgdata:coap-server, Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton Glukhovpackages:pkgdata:coap-server, Bug reportspackages:pkgdata:coap-server, Sources
networkiiod0.21-4libc, libiioDaemon to access IIO devices via network.

20kB20kBLGPL-2.1Michael HeimpoldBug reportsSources
networkiiod0.21-4libc, libiiopackages:pkgdata:iiod, Daemon to access IIO devices via network.

20kB20kBLGPL-2.1Michael Heimpoldpackages:pkgdata:iiod, Bug reportspackages:pkgdata:iiod, Sources
networknoping1.10.0-3libc, librt, libpthread, liboping, libncurses6Ncurses application to send ICMP echo request to network hosts

13kB12kBLGPL-2.1-or-laterJo-Philipp WichBug reportsSources
networkoping1.10.0-3libc, libopingSend ICMP echo request to network hosts

9kB8kBLGPL-2.1-or-laterJo-Philipp WichBug reportsSources
networkpcapplusplus21.11-1libc, librt, libpthread, libpcap1, libstdcpp6Library for getting information about the passing traffic

270kB271kBUnlicensecommon packages maintainersBug reportsSources
networkacme-dnsapi3.0.6-3libc, acmeThis package provides DNS API integration for ACME (Letsencrypt) client.

149kB148kBGPL-3.0-onlyToke Høiland-JørgensenBug reportsSources
networkacme3.0.6-3libc, wget-ssl, ca-bundle, openssl-util, socatA client for issuing Letsencrypt certificates.

54kB53kBGPL-3.0-onlyToke Høiland-JørgensenBug reportsSources
networkacme-dnsapi3.0.6-3libc, acmepackages:pkgdata:acme-dnsapi, This package provides DNS API integration for ACME (Letsencrypt) client.

149kB148kBGPL-3.0-onlyToke Høiland-Jørgensenpackages:pkgdata:acme-dnsapi, Bug reportspackages:pkgdata:acme-dnsapi, Sources
networkacme3.0.6-3libc, wget-ssl, ca-bundle, openssl-util, socatpackages:pkgdata:acme, A client for issuing Letsencrypt certificates.

54kB53kBGPL-3.0-onlyToke Høiland-Jørgensenpackages:pkgdata:acme, Bug reportspackages:pkgdata:acme, Sources
networkadblock4.1.5-8libc, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkgPowerful adblock solution to block ad/abuse domains via dnsmasq, unbound, named or kresd.
The script supports many domain blacklist sites plus manual black- and whitelist overrides.
Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk BrenkenBug reportsSources
networkadblock4.1.5-8libc, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkgpackages:pkgdata:adblock, Powerful adblock solution to block ad/abuse domains via dnsmasq, unbound, named or kresd.
The script supports many domain blacklist sites plus manual black- and whitelist overrides.
Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk Brenkenpackages:pkgdata:adblock, Bug reportspackages:pkgdata:adblock, Sources
networkaddrwatch-mysql1.0.2-3libc, addrwatch, libmariadb3This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the MySQL output module.

16kB15kBGPL-3.0-or-laterOndrej CaletkaBug reportsSources
networkaddrwatch-stdout1.0.2-3libc, addrwatchThis is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the stdout output module.

2kB1kBGPL-3.0-or-laterOndrej CaletkaBug reportsSources
networkaddrwatch-syslog1.0.2-3libc, addrwatchThis is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the syslog output module.

3kB2kBGPL-3.0-or-laterOndrej CaletkaBug reportsSources
networkaddrwatch1.0.2-3libc, libpcap1, libevent2-7This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the main addrwatch program.

24kB23kBGPL-3.0-or-laterOndrej CaletkaBug reportsSources
networkaddrwatch-mysql1.0.2-3libc, addrwatch, libmariadb3packages:pkgdata:addrwatch-mysql, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the MySQL output module.

16kB15kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch-mysql, Bug reportspackages:pkgdata:addrwatch-mysql, Sources
networkaddrwatch-stdout1.0.2-3libc, addrwatchpackages:pkgdata:addrwatch-stdout, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the stdout output module.

2kB1kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch-stdout, Bug reportspackages:pkgdata:addrwatch-stdout, Sources
networkaddrwatch-syslog1.0.2-3libc, addrwatchpackages:pkgdata:addrwatch-syslog, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the syslog output module.

3kB2kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch-syslog, Bug reportspackages:pkgdata:addrwatch-syslog, Sources
networkaddrwatch1.0.2-3libc, libpcap1, libevent2-7packages:pkgdata:addrwatch, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the main addrwatch program.

24kB23kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch, Bug reportspackages:pkgdata:addrwatch, Sources
networkadguardhome0.107.21-1libc, ca-bundleFree and open source, powerful network-wide ads and trackers blocking DNS server.

10899kB10920kBGPL-3.0-onlyDobroslaw KijowskiBug reportsSources
networkadguardhome0.107.21-1libc, ca-bundlepackages:pkgdata:adguardhome, Free and open source, powerful network-wide ads and trackers blocking DNS server.

10899kB10920kBGPL-3.0-onlyDobroslaw Kijowskipackages:pkgdata:adguardhome, Bug reportspackages:pkgdata:adguardhome, Sources
networkapcupsd-cgi3.14.14-3libc, libpthread, libgdUPS control software CGI module

29kB29kBGPL-2.0Othmar TrunigerBug reportsSources
networkapcupsd3.14.14-3libc, libpthread, libusb-compat4UPS control software

234kB234kBGPL-2.0Othmar TrunigerBug reportsSources
networkapinger2015-04-09-78eb3287-3libcAlarm Pinger (apinger) is a little tool which monitors various IP devices by
simple ICMP echo requests. There are various other tools, that can do this,
but most of them are shell or perl scripts, spawning many processes, thus much
CPU-expensive, especially when one wants continuous monitoring and fast
response on target failure. Alarm Pinger is a single program written in C, so
it doesn't need much CPU power even when monitoring many targets with frequent
probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested
on Linux and FreeBSD.

31kB30kBGPL-2.0-onlyAlex SamorukovBug reportsSources
networkapinger2015-04-09-78eb3287-3libcpackages:pkgdata:apinger, Alarm Pinger (apinger) is a little tool which monitors various IP devices by
simple ICMP echo requests. There are various other tools, that can do this,
but most of them are shell or perl scripts, spawning many processes, thus much
CPU-expensive, especially when one wants continuous monitoring and fast
response on target failure. Alarm Pinger is a single program written in C, so
it doesn't need much CPU power even when monitoring many targets with frequent
probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested
on Linux and FreeBSD.

31kB30kBGPL-2.0-onlyAlex Samorukovpackages:pkgdata:apinger, Bug reportspackages:pkgdata:apinger, Sources
networkapinger-rrd2015-04-09-78eb3287-3libc, librt, libpthread, apinger, rrdtool1, rrdcgi1Generate RRD Graphs from Apinger Data

1kB0kBGPL-2.0-onlyAlex SamorukovBug reportsSources
networkapinger-rrd2015-04-09-78eb3287-3libc, librt, libpthread, apinger, rrdtool1, rrdcgi1packages:pkgdata:apinger-rrd, Generate RRD Graphs from Apinger Data

1kB0kBGPL-2.0-onlyAlex Samorukovpackages:pkgdata:apinger-rrd, Bug reportspackages:pkgdata:apinger-rrd, Sources
networkatlas-probe2.6.3-1libc, librt, libopenssl1.1, openssh-client, sudoRIPE Atlas is a global, open, distributed Internet measurement platform,
consisting of thousands of measurement devices that measure Internet
connectivity in real time.

210kB209kBGPL-2.0-or-laterJan PavlinecBug reportsSources
networkatlas-sw-probe-rpc5080-2libc, atlas-probe, bind-dig, rpcdProvides ubus calls for probe.

1kB0kBGPL-3.0-or-laterJan PavlinecBug reportsSources
networkatlas-sw-probe5080-2libc, librt, libpthread, atlas-probe, dropbearconvertRIPE Atlas SW probe is software variant of RIPE Atlas Probe.
It contains utilities which helps actively measure
Internet connectivity through ping, traceroute, DNS, SSL/TLS, NTP, and HTTP.
Data are then collected, aggregated and published by the RIPE NCC.

20kB19kBGPL-3.0-or-laterJan PavlinecBug reportsSources
networkatlas-sw-probe-rpc5080-2libc, atlas-probe, bind-dig, rpcdpackages:pkgdata:atlas-sw-probe-rpc, Provides ubus calls for probe.

1kB0kBGPL-3.0-or-laterJan Pavlinecpackages:pkgdata:atlas-sw-probe-rpc, Bug reportspackages:pkgdata:atlas-sw-probe-rpc, Sources
networkbanip0.9.0-1libc, jshn, jsonfilter, firewall4, ca-bundle, logd, rpcd, rpcd-mod-rpcsysbanIP blocks IPs via named nftables Sets.
banIP supports many IP blocklist feeds and provides a log service to block suspicious IPs in realtime.
Please see https://github.com/openwrt/packages/blob/master/net/banip/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk BrenkenBug reportsSources
networkbeanstalkd1.9-2libc, librt, libpthreadBeanstalk is a simple, fast work queue.

22kB21kBMITPhilip PrindevilleBug reportsSources
networkbeanstalkd1.9-2libc, librt, libpthreadpackages:pkgdata:beanstalkd, Beanstalk is a simple, fast work queue.

22kB21kBMITPhilip Prindevillepackages:pkgdata:beanstalkd, Bug reportspackages:pkgdata:beanstalkd, Sources
networkbmon4.0-1libc, libncursesw6, libnl-core200, libnl-route200, confuse, terminfobmon is a portable bandwidth monitor
and rate estimator running on various
operating systems. It supports various
input methods for different architectures.

37kB37kBMITBaptiste JonglezBug reportsSources
networkboinc-wrapper26018-1libc, libstdcpp6The Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC wrapper that runs the Project applications as
subprocesses, and handles all communication with the BOINC client
(e.g., to report CPU time and fraction done).

339kB338kBGPL-3.0-or-laterVitalii KoshuraBug reportsSources
networkboinc-wrapper26018-1libc, libstdcpp6packages:pkgdata:boinc-wrapper, The Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC wrapper that runs the Project applications as
subprocesses, and handles all communication with the BOINC client
(e.g., to report CPU time and fraction done).

339kB338kBGPL-3.0-or-laterVitalii Koshurapackages:pkgdata:boinc-wrapper, Bug reportspackages:pkgdata:boinc-wrapper, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas