This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='utilities'

CategoryNameVersionDependencies ...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug reportSource code
utilitieshashdeep4.4-3libc, librt, libpthread, libstdcpp6hashdeep is a set of tools to compute MD5, SHA1, SHA256, tiger
and whirlpool hashsums of arbitrary number of files recursively.

449kB454kBNLPLTobe DeprezBug reportsSources
utilitiesgpsd-utils3.23.1-2libc, libusb-1.0-0packages:pkgdata:gpsd-utils, gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains utilities for interacting with GPS daemon.

4kB3kBBSD-3-ClausePushpal Sidhupackages:pkgdata:gpsd-utils, Bug reportspackages:pkgdata:gpsd-utils, Sources
utilitiesgpsd-utils3.23.1-2libc, libusb-1.0-0gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains utilities for interacting with GPS daemon.

4kB3kBBSD-3-ClausePushpal SidhuBug reportsSources
utilitieslibgps293.23.1-2libc, libusb-1.0-0packages:pkgdata:libgps29, gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains the libgps library.

56kB55kBBSD-3-ClausePushpal Sidhupackages:pkgdata:libgps29, Bug reportspackages:pkgdata:libgps29, Sources
utilitieslibgps293.23.1-2libc, libusb-1.0-0gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains the libgps library.

56kB55kBBSD-3-ClausePushpal SidhuBug reportsSources
utilitiesgpsd3.23.1-2libc, libusb-1.0-0packages:pkgdata:gpsd, gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains the GPS daemon.

266kB265kBBSD-3-ClausePushpal Sidhupackages:pkgdata:gpsd, Bug reportspackages:pkgdata:gpsd, Sources
utilitiesgpsd3.23.1-2libc, libusb-1.0-0gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains the GPS daemon.

266kB265kBBSD-3-ClausePushpal SidhuBug reportsSources
utilitiesgpsd-clients3.23.1-2libc, libusb-1.0-0, libncurses6packages:pkgdata:gpsd-clients, gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains auxiliary tools and example clients for monitoring and
testing the GPS daemon.

960kB960kBBSD-3-ClausePushpal Sidhupackages:pkgdata:gpsd-clients, Bug reportspackages:pkgdata:gpsd-clients, Sources
utilitiesgpsd-clients3.23.1-2libc, libusb-1.0-0, libncurses6gpsd is a userland daemon acting as a translator between GPS and AIS receivers
and their clients. gpsd listens on port 2947 for clients requesting
position/time/velocity information. The receivers are expected to generate
position information in a well-known format -- as NMEA-0183 sentences, SiRF
binary, Rockwell binary, Garmin binary format, or other vendor binary
protocols. gpsd takes this information from the GPS and translates it into
something uniform and easier to understand for clients.
This package contains auxiliary tools and example clients for monitoring and
testing the GPS daemon.

960kB960kBBSD-3-ClausePushpal SidhuBug reportsSources
utilitiesgetopt2.37.4-1libc, librtpackages:pkgdata:getopt, getopt is used to break up (parse) options in command lines for easy parsing
by shell procedures, and to check for legal options

10kB9kBGPL-2.0-onlyOpenWrt teampackages:pkgdata:getopt, Bug reportspackages:pkgdata:getopt, Sources
utilitiesgetopt2.37.4-1libc, librtgetopt is used to break up (parse) options in command lines for easy parsing
by shell procedures, and to check for legal options

10kB9kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesftdi_eeprom1.5-2libc, librt, libpthread, confuse, libftdi1packages:pkgdata:ftdi_eeprom, ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

8kB7kBLGPL-2.1-onlyÁlvaro Fernández Rojaspackages:pkgdata:ftdi_eeprom, Bug reportspackages:pkgdata:ftdi_eeprom, Sources
utilitiesftdi_eeprom1.5-2libc, librt, libpthread, confuse, libftdi1ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

8kB7kBLGPL-2.1-onlyÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi1.2-2libcpackages:pkgdata:flashrom-spi, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

80kB80kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:flashrom-spi, Bug reportspackages:pkgdata:flashrom-spi, Sources
utilitiesflashrom-pci1.2-2libc, pciutilspackages:pkgdata:flashrom-pci, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

94kB94kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:flashrom-pci, Bug reportspackages:pkgdata:flashrom-pci, Sources
utilitiesflashrom1.2-2libc, libftdi1, libusb-1.0-0, pciutilspackages:pkgdata:flashrom, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

111kB111kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:flashrom, Bug reportspackages:pkgdata:flashrom, Sources
utilitiesflashrom1.2-2libc, libftdi1, libusb-1.0-0, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

111kB111kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-usb1.2-2libc, libftdi1, libusb-1.0-0flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

99kB98kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi1.2-2libcflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

80kB80kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-pci1.2-2libc, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

94kB94kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiescollectd-mod-fscache5.12.0-34libc, collectdpackages:pkgdata:collectd-mod-fscache, file-system based caching framework input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-fscache, Bug reportspackages:pkgdata:collectd-mod-fscache, Sources
utilitiescollectd-mod-fscache5.12.0-34libc, collectdfile-system based caching framework input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-filecount5.12.0-34libc, collectdpackages:pkgdata:collectd-mod-filecount, file count input plugin

4kB4kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-filecount, Bug reportspackages:pkgdata:collectd-mod-filecount, Sources
utilitiescollectd-mod-filecount5.12.0-34libc, collectdfile count input plugin

4kB4kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-match-empty-counter5.12.0-34libc, librt, libpthread, collectdpackages:pkgdata:collectd-mod-match-empty-counter, empty-counter match plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-match-empty-counter, Bug reportspackages:pkgdata:collectd-mod-match-empty-counter, Sources
utilitiescollectd-mod-match-empty-counter5.12.0-34libc, librt, libpthread, collectdempty-counter match plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-email5.12.0-34libc, collectdpackages:pkgdata:collectd-mod-email, email output plugin

6kB5kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-email, Bug reportspackages:pkgdata:collectd-mod-email, Sources
utilitiescollectd-mod-email5.12.0-34libc, collectdemail output plugin

6kB5kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiesdumb-init1.2.2-1libc, librt, libpthreadpackages:pkgdata:dumb-init, dumb-init is a simple process supervisor and init system designed to run as
PID 1 inside minimal container environments.

4kB4kBMITToni Uhligpackages:pkgdata:dumb-init, Bug reportspackages:pkgdata:dumb-init, Sources
utilitiesdumb-init1.2.2-1libc, librt, libpthreaddumb-init is a simple process supervisor and init system designed to run as
PID 1 inside minimal container environments.

4kB4kBMITToni UhligBug reportsSources
utilitiesdmesg2.37.4-1libc, libncursesw6packages:pkgdata:dmesg, dmesg is used to examine or control the kernel ring buffer

25kB24kBGPL-2.0-onlyOpenWrt teampackages:pkgdata:dmesg, Bug reportspackages:pkgdata:dmesg, Sources
utilitiesdmesg2.37.4-1libc, libncursesw6dmesg is used to examine or control the kernel ring buffer

25kB24kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiescollectd-mod-disk5.12.0-34libc, collectd, libudevpackages:pkgdata:collectd-mod-disk, disk usage/timing input plugin

5kB5kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-disk, Bug reportspackages:pkgdata:collectd-mod-disk, Sources
utilitiescollectd-mod-disk5.12.0-34libc, collectd, libudevdisk usage/timing input plugin

5kB5kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-df5.12.0-34libc, collectdpackages:pkgdata:collectd-mod-df, disk space input plugin

7kB6kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-df, Bug reportspackages:pkgdata:collectd-mod-df, Sources
utilitiescollectd-mod-df5.12.0-34libc, collectddisk space input plugin

7kB6kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiesdfu-util0.11-1libc, libusb-1.0-0packages:pkgdata:dfu-util, dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1
specifications of the USB forum. DFU is intended to download and
upload firmware to/from devices connected over USB.

21kB20kBGPL-2.0-or-laterBruno Randolfpackages:pkgdata:dfu-util, Bug reportspackages:pkgdata:dfu-util, Sources
utilitiesdfu-util0.11-1libc, libusb-1.0-0dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1
specifications of the USB forum. DFU is intended to download and
upload firmware to/from devices connected over USB.

21kB20kBGPL-2.0-or-laterBruno RandolfBug reportsSources
utilitiesdc1.06.95-1libc, bcpackages:pkgdata:dc, dc is a reverse-polish desk calculator which supports unlimited
precision arithmetic.

19kB18kBGPL-2.0Bruno Randolfpackages:pkgdata:dc, Bug reportspackages:pkgdata:dc, Sources
utilitiesdc1.06.95-1libc, bcdc is a reverse-polish desk calculator which supports unlimited
precision arithmetic.

19kB18kBGPL-2.0Bruno RandolfBug reportsSources
utilitiescrelay0.14-2libc, libftdi1, hidapi, libusb-1.0-0packages:pkgdata:crelay, crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

16kB15kBGPL-3.0-or-laterTed Hesspackages:pkgdata:crelay, Bug reportspackages:pkgdata:crelay, Sources
utilitiescrelay0.14-2libc, libftdi1, hidapi, libusb-1.0-0crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

16kB15kBGPL-3.0-or-laterTed HessBug reportsSources
utilitiescollectd-mod-contextswitch5.12.0-34libc, collectdpackages:pkgdata:collectd-mod-contextswitch, context switch input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-contextswitch, Bug reportspackages:pkgdata:collectd-mod-contextswitch, Sources
utilitiescollectd-mod-contextswitch5.12.0-34libc, collectdcontext switch input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiestaskset2.37.4-1libc, librtpackages:pkgdata:taskset, contains: taskset

13kB12kBGPL-2.0-onlyOpenWrt teampackages:pkgdata:taskset, Bug reportspackages:pkgdata:taskset, Sources
utilitiestaskset2.37.4-1libc, librtcontains: taskset

13kB12kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesmount-utils2.37.4-1libc, librt, libmount1, libsmartcols1contains: mount, umount, findmnt

52kB51kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesbluez-examples5.49-1libc, libssp, pythoncontains many examples apps for bluetooth, requiring python

27kB26kBGPL-2.0+Nicolas ThillBug reportsSources
utilitiespciutils3.8.0-2libc, libkmod, libpci, pciidscontains collection of programs for inspecting and manipulating configuration
of PCI devices

43kB42kBGPL-2.0Lucian CristianBug reportsSources
utilitiescollectd-mod-conntrack5.12.0-34libc, collectdpackages:pkgdata:collectd-mod-conntrack, connection tracking table size input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,packages:pkgdata:collectd-mod-conntrack, Bug reportspackages:pkgdata:collectd-mod-conntrack, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas