This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='network---routing-and-redirection'

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug report Source code
network---routing-and-redirectionbird1c-ipv41.6.8-2libc, libreadline8, libncurses6, bird1-ipv4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


10kB9kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv41.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


216kB215kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1cl-ipv61.6.8-2libc, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1c-ipv61.6.8-2libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv61.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


241kB240kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv60.3-5libc, luci-base, luci-compat, bird1-ipv6-uciLuCI support for BIRD (v1.6) (IPv6)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv40.3-5libc, luci-base, luci-compat, bird1-ipv4-uciLuCI support for BIRD (v1.6) (IPv4)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv6-uci0.3-5libc, libuci20130104, uci, bird1-ipv6The BIRD UCI module (v1.6) (IPv6)

6kB5kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv4-uci0.3-5libc, libuci20130104, uci, bird1-ipv4The BIRD UCI module (v1.6) (IPv4)

7kB6kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbatmand1440-1libc, libpthread, kmod-tunpackages:pkgdata:batmand, B.A.T.M.A.N. layer 3 routing daemon

41kB41kBGPL-2.0Corinna "Elektra" Aichelepackages:pkgdata:batmand, Bug reportspackages:pkgdata:batmand, Sources
network---routing-and-redirectionbatmand1440-1libc, libpthread, kmod-tunB.A.T.M.A.N. layer 3 routing daemon

41kB41kBGPL-2.0Corinna "Elektra" AicheleBug reportsSources
network---routing-and-redirectionbabeld1.12.2-1libc, libubus20220601, libubox20220515packages:pkgdata:babeld, Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
with fast convergence properties. It is based on the ideas in DSDV, AODV and
Cisco's EIGRP, but is designed to work well not only in wired networks but
also in wireless mesh networks, and has been extended with support for
overlay networks. Babel is an IETF standard protocol (RFC 8966).

68kB67kBMITGabriel Kerneis, Baptiste Jonglez, Nick Hainke,packages:pkgdata:babeld, Bug reportspackages:pkgdata:babeld, Sources
network---routing-and-redirectionbabeld1.12.2-1libc, libubus20220601, libubox20220515Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
with fast convergence properties. It is based on the ideas in DSDV, AODV and
Cisco's EIGRP, but is designed to work well not only in wired networks but
also in wireless mesh networks, and has been extended with support for
overlay networks. Babel is an IETF standard protocol (RFC 8966).

68kB67kBMITGabriel Kerneis, Baptiste Jonglez, Nick Hainke,Bug reportsSources
network---routing-and-redirectionbabel-pinger0.1-1libc, librtpackages:pkgdata:babel-pinger, Babel-pinger is a hack to export a default route into Babel for people
using DHCP to configure their routers rather than speaking to their
upstream provider with a proper routing protocol.

4kB3kBGabriel Kerneispackages:pkgdata:babel-pinger, Bug reportspackages:pkgdata:babel-pinger, Sources
network---routing-and-redirectionbabel-pinger0.1-1libc, librtBabel-pinger is a hack to export a default route into Babel for people
using DHCP to configure their routers rather than speaking to their
upstream provider with a proper routing protocol.

4kB3kBGabriel KerneisBug reportsSources
network---routing-and-redirectionbmx6r2018051214-2libc, librt, libpthread, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tunBMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

123kB122kBGPL-2.0Axel NeumannBug reportsSources
network---routing-and-redirectionbmx6-uci-configr2018051214-2libc, bmx6, libuci20130104configuration plugin based on uci (recommended!)

9kB9kBGPL-2.0Axel NeumannBug reportsSources
network---routing-and-redirectionbmx6-tabler2018051214-2libc, bmx6bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

9kB9kBGPL-2.0Axel NeumannBug reportsSources
network---routing-and-redirectionbmx6-smsr2018051214-2libc, bmx6sms plugin

5kB5kBGPL-2.0Axel NeumannBug reportsSources
network---routing-and-redirectionbmx6-jsonr2018051214-2libc, librt, libpthread, bmx6, libjson-c5json plugin based on json-c

6kB6kBGPL-2.0Axel NeumannBug reportsSources
network---routing-and-redirectionolsrd-mod-dot-draw0.9.6.2-v0.9.6.2libc, olsrdpackages:pkgdata:olsrd-mod-dot-draw, Dot topology information plugin

4kB3kBBSD-3-ClauseSaverio Protopackages:pkgdata:olsrd-mod-dot-draw, Bug reportspackages:pkgdata:olsrd-mod-dot-draw, Sources
network---routing-and-redirectionbirdcl61.6.3-1libc, libssp, bird6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdcl41.6.3-1libc, bird4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdc61.6.3-1libc, libreadline, libncurses, bird6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdc41.6.3-1libc, libssp, libreadline, libncurses, bird4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird61.6.3-1libc, libssp, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


196kB195kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird41.6.3-1libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


188kB187kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionluci-app-bird60.3-1libc, bird6-uci, luci-basebird6 application for LuCI

8kB7kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionbird6-uci0.3-1libc, bird6, libuci, ucibird6 UCI integration module

6kB5kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionluci-app-bird40.3-1libc, libssp, bird4-uci, luci-basebird4 application for LuCI

8kB7kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionbird4-uci0.3-1libc, bird4, libuci, ucibird4 UCI integration module

7kB6kBGPL-3.0+Eloi CarboBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas