This translation is older than the original page and might be outdated. See what has changed.

패키지

LEDE는 장치의 기능을 확장하기 위해 수천개의 패키지를 제공합니다.

이 페이지는 LEDE 17.01에서 사용 가능한 패키지들의 목록입니다.

사용 가능한 패키지의 간략한 개요는 패키지 목차에서 확인할 수 있습니다.

패키지 분류를 클릭하면 패키지 테이블이 필터링되지만 직접 수동으로 필터링 할 수도 있습니다.

Filter by category

아래 표는 성능상의 이유로 한 페이지에 50개의 패키지만 출력합니다.

  • 왼쪽 밑에 있는 “next page” 또는 “previous page”를 클릭하면 다음 또는 이전의 50개의 패키지를 출력합니다.
  • 테이블 제일 위의 열 명을 클릭하면 그 열을 기준으로 정렬됩니다.
  • 흰색 창에 필터 기준을 입력하세요.

아래 표에서 패키지 이름을 클릭하면 해당 패키지의 문서가 있는 페이지로 이동합니다. 없는 경우 자유롭게 추가할 수 있습니다.

Filtered by categories='network'

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug reportSource code
networkltq-vdsl-app4.17.18.6-38libc, libpthread, librt, ltq-dsl-base, libubox20220515, libubus20220601Userland tool needed to control Lantiq VDSL CPE

50kB49kBBSD-2-ClauseOpenWrt teamBug reportsSources
networkmac-telnet-client2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

13kB12kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmac-telnet-discover2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

4kB3kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmac-telnet-ping2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

7kB6kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmac-telnet-server2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

11kB10kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmap7libc, kmod-ip6-tunnel, libubox20220515, libubus20220601, iptables-mod-conntrack-extra, kmod-nat46Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and
Lightweight 4over6 (RFC7596) in /etc/config/network.
MAP combines address and port translation with the tunneling
of IPv4 packets over an IPv6 network

7kB7kBGPL-2.0Hans DedeckerBug reportsSources
networkmemcached1.6.9-2libc, librt, libpthread, libevent2-7Free and open source, high-performance, distributed memory object caching system

81kB80kBBSD-3-ClauseThomas HeilBug reportsSources
networkmii-tool2.10-1libc, librt, libpthreadThe mii-tool command allows you to set or autodetect the media type
or mii chipset-based ethernet devices. It traditionally had been
distributed in the net-tools package. This is a single distribution
optimized for embedded systems and fully automated cross/-sysroot-builds

6kB6kBGPL-2.0-or-laterStijn SegersBug reportsSources
networkmikrotik-btest0.5.1-1libc, libpthread, librtA bandwidth test client compatible with Mikrotik's RouterOS BTest server.

8kB7kBGPLv3Roger Pueyo CentellesBug reportsSources
networkmini_snmpd1.6-3libc, jsonfilter, ubus, procd, uboxA tiny SNMP server for embedded systems

26kB25kBGPL-2.0Marcin JurkowskiBug reportsSources
networkminimalist-pcproxy2014-12-12-2d6d1b0b-7libc, libubox20220515This package contains a daemon which can be used to forward
PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.

In and of itself, it is not very useful, but combined with hnetd+miniupnpd
it allows for control of NAT forwarding and firewall pinholes from multiple
hops away.

7kB6kBBSD-3-ClauseMarkus StenbergBug reportsSources
networkmosquitto-client-nossl2.0.17-1libc, librt, libcares, cjson, libmosquitto-nosslCommand line client tools for working with mosquitto.
This includes mosquitto_sub, mosquitto_pub, mosquitto_rr
and the mosquitto_ctrl tool.
This package is built without SSL support

50kB49kBEPL-2.0Karl PalssonBug reportsSources
networkmosquitto-client-ssl2.0.17-1libc, librt, libcares, cjson, libmosquitto-sslCommand line client tools for working with mosquitto.
This includes mosquitto_sub, mosquitto_pub, mosquitto_rr
and the mosquitto_ctrl tool.
This package is built with SSL support

73kB72kBEPL-2.0Karl PalssonBug reportsSources
networkmosquitto-nossl2.0.17-1libc, librtMosquitto is an open source (BSD licensed) message broker that implements
the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight
method of carrying out messaging using a publish/subscribe model.

This package also includes some basic support for configuring via UCI
This package is built WITHOUT SSL support.

101kB100kBEPL-2.0Karl PalssonBug reportsSources
networkmosquitto-ssl2.0.17-1libc, librt, libopenssl1.1, libwebsockets-openssl, cjsonMosquitto is an open source (BSD licensed) message broker that implements
the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight
method of carrying out messaging using a publish/subscribe model.

This package also includes some basic support for configuring via UCI
This package is built with SSL support. TLS-PSK will be included (in both
the client and broker) if OpenSSL is built with TLS-PSK support.

161kB160kBEPL-2.0Karl PalssonBug reportsSources
networkmrd62013-11-30-c805eb3325..0-2libc, libstdcpp6Multicast is becoming a major component in next generation networks, used
in several scenarios, from video broadcasting to multimedia conferencing.
In order to be implemented, new technology needs supporting hardware and
software across a set of devices and systems. MRD6 is an implementation of
a modular IPv6 Multicast Routing Framework for the Linux operating system
and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

288kB288kBGPL-2.0+Steven BarthBug reportsSources
networkmtr0.94-1libc, librt, libpthread, libncurses6mtr combines the functionality of the 'traceroute' and 'ping' programs
in a single network diagnostic tool.
As mtr starts, it investigates the network connection between the host
mtr runs on and a user-specified destination host. After it
determines the address of each network hop between the machines,
it sends a sequence ICMP ECHO requests to each one to determine the
quality of the link to each machine. As it does this, it prints
running statistics about each machine.

35kB33kBGPL-2.0-or-laterJonathan McCrohanBug reportsSources
networknbd-server3.19-2libc, librt, libpthread, glib2This package contains the network block device server.

23kB22kBGPL-2.0-or-laterMarcin JurkowskiBug reportsSources
networknbd3.19-2libc, kmod-nbdThis package contains the network block device client.

12kB11kBGPL-2.0-or-laterMarcin JurkowskiBug reportsSources
networkncp1.2.4-1libccopy files over the network

19kB18kBFREEAndreas ShimokawaBug reportsSources
networkndppd0.2.5-2libc, librt, libpthread, libstdcpp6ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
Protocol) messages between interfaces. ndppd currently only supports Neighbor
Solicitation Messages and Neighbor Advertisement Messages.

The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
are supported. No subnets. ndppd solves this by listening for Neighbor
Solicitation messages on an interface, then query the internal interfaces for
that target IP before finally sending a Neighbor Advertisement message.

30kB29kBGPL-3.0-or-laterGabriel KerneisBug reportsSources
networknetcat0.7.1-2libc, librt, libpthreadNetcat is a featured networking utility which reads and writes data across network connections, using the TCP/IP protocol.
It is designed to be a reliable “back-end” tool that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities.

14kB13kBGPL-2.0Adam GenslerBug reportsSources
networknetdiscover0.3-pre-beta7-2libc, libpcap1, libnet-1.2.x, libpthreadAn active/passive address reconnaissance tool

286kB290kBGPL-2.0Mislav NovakovicBug reportsSources
networknetperf2.7.0-3libc, librt, libpthreadNetwork performance measurement tool

123kB122kBCustomToke Høiland-JørgensenBug reportsSources
networknlbwmon2021-09-01-d82c910c-1libc, librt, libpthread, libubox20220515, libnl-tiny1, zlib, kmod-nf-conntrack-netlinkOpenWrt Traffic Usage Monitor

19kB18kBISCJo-Philipp WichBug reportsSources
networknoping1.10.0-3libc, librt, libpthread, liboping, libncurses6Ncurses application to send ICMP echo request to network hosts

13kB12kBLGPL-2.1-or-laterJo-Philipp WichBug reportsSources
networknut-avahi-service2.7.4-27libc, librt, libpthread, nut, avahi-daemonThis package contains the service definition for announcing the
attached UPS via mDNS/DNS-SD.

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-common2.7.4-27libc, librt, libpthread, nut, libusb-compat4, libneonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
This package contains the common files.

15kB14kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bcmxcp_usb2.7.4-27libc, nut, nut-serverExperimental driver for UPSes supporting the BCM/XCP protocol over USB

37kB36kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-blazer_usb2.7.4-27libc, nut, nut-serverDriver for Megatec/Q1 protocol USB based UPS equipment

28kB27kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-nutdrv_atcl_usb2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for ATCL FOR UPS equipment

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-nutdrv_qx2.7.4-27libc, nut, nut-serverDriver for Q* protocol serial and USB based UPS equipment

64kB65kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-richcomm_usb2.7.4-27libc, nut, nut-serverDriver for UPS equipment using Richcomm dry-contact to USB solution

22kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-riello_usb2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Riello UPS Protocol UPS equipment via USB

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplite_usb2.7.4-27libc, nut, nut-serverDriver for older Tripp Lite USB UPSes (not PDC HID)


29kB28kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-usbhid-ups2.7.4-27libc, nut, nut-serverDriver for USB/HID UPS equipment

54kB53kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-server2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsd is responsible for serving the data from the drivers to the
clients. It connects to each driver and maintains a local cache of the
current state. Queries from the clients are served from this cache, so
delays are minimal. This program is essential, and must be running at
all times to actually make any use out of the drivers and clients.

47kB46kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsc2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsc is provided as a quick way to poll the status of a UPS server. It
can be used inside shell scripts and other programs that need UPS data
but do not want to include the full interface.

8kB7kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upscmd2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upscmd allows you to invoke “instant commands” in your UPS hardware. Not
all hardware supports this, so check the list with -l to see if anything
will work on your equipment. On hardware that supports it, you can use
this program to start and stop battery tests, invoke a front panel test
(beep!), turn the load on or off, and more.

9kB8kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upslog2.7.4-27libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upslog is a daemon that will poll a UPS at periodic intervals, fetch the
variables that interest you, format them, and write them to a file.

10kB9kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsmon-sendmail-notify2.7.4-27libc, nut, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon with default notification via sendmail

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsmon2.7.4-27libc, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon is the client process that is responsible for the most important
part of UPS monitoring--shutting down the system when the power goes
out. It can call out to other helper programs for notification purposes
during power events. upsmon can monitor multiple systems using a single
process. Every UPS that is defined in the upsmon.conf configuration file
is assigned a power value and a type (slave or master).

21kB20kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsrw2.7.4-27libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsrw allows you to view and change the read/write variables inside your
UPS. It sends commands via the upsd to your driver, which configures the
hardware for you. The list of variables that allow you to change their
values is based on the capabilities of your UPS equipment. Not all
models support this feature. Typically, cheaper hardware does not
support any of them.

11kB10kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upssched2.7.4-27libc, nut, nut-common, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upssched was created to allow users to execute programs at times relative
to events being monitored by upsmon. The original purpose was to allow
for a shutdown to occur after some fixed period on battery, but there are
other uses that are possible.
You can alternatively write your own script and save some space.

14kB13kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-web-cgi2.7.4-27libc, librt, libpthread, nut, nut-common, libgdThe CGI programs are clients that run through your web server.
They allow you to see UPS status and perform certain administrative
commands from any web browser. Javascript and cookies are not required.

42kB41kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut2.7.4-27libcNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.

0kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkodhcp6c2022-08-05-7d21e8d8-18libc, libubox20220515Embedded DHCPv6-client for OpenWrt

26kB25kBGPL-2.0Hans DedeckerBug reportsSources
networkodhcpd-ipv6only2023-01-02-4a673e1c-2libc, libubox20220515, libuci20130104, libubus20220601, libnl-tiny1odhcpd is a daemon for serving and relaying IP management protocols to
configure clients and downstream routers. It tries to follow the RFC 6204
requirements for IPv6 home routers.

This is a variant providing server services for RA, stateless and stateful
DHCPv6, prefix delegation and can be used to relay RA, DHCPv6 and NDP between
routed (non-bridged) interfaces in case no delegated prefixes are available.

42kB41kBGPL-2.0Hans DedeckerBug reportsSources
networkodhcpd2023-01-02-4a673e1c-2libc, librt, libpthread, libubox20220515, libuci20130104, libubus20220601, libnl-tiny1odhcpd is a daemon for serving and relaying IP management protocols to
configure clients and downstream routers. It tries to follow the RFC 6204
requirements for IPv6 home routers.

This is a variant providing server services for DHCPv4, RA, stateless and
stateful DHCPv6, prefix delegation and can be used to relay RA, DHCPv6 and
NDP between routed (non-bridged) interfaces in case no delegated prefixes
are available.

42kB41kBGPL-2.0Hans DedeckerBug reportsSources
networkola0.10.8-4libc, protobuf, libftdi1, libusb-1.0-0, libuuid1, libstdcpp6, libpthread, librt, zlib, libncurses6, liblo, libmicrohttpdOLA (Open Lighting Architecture) is a framework that allows applications to
send and receive DMX512, using various hardware devices and 'DMX over IP'
protocols. It enables software controllers talk to DMX hardware.

1919kB1923kBLGPL-2.1-or-laterChristian BeierBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2020/05/21 09:32
  • by tmomas