Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:zyxel:zyxel_vmg8825-t50 [2020/09/11 10:28] – [Serial] smokeythebanditinbox:toh:zyxel:zyxel_vmg8825-t50 [2020/09/12 11:45] – [Hardware highlights] CPU added tmomas
Line 6: Line 6:
 The ZyXEL VMG8825-T50 is a cheap but modern modem/router that is provided by ISP's. It supports ADSL, and has an ethernet WAN port.  The ZyXEL VMG8825-T50 is a cheap but modern modem/router that is provided by ISP's. It supports ADSL, and has an ethernet WAN port. 
 The device has built in Wifi 2.4/5Ghz with support up to Wifi AC. It has 4 ethernet port for the LAN network, one USB 2.0 port and one usb 3.0 port. The device has built in Wifi 2.4/5Ghz with support up to Wifi AC. It has 4 ethernet port for the LAN network, one USB 2.0 port and one usb 3.0 port.
-The firmware on it is fairly restrictive, but not as bad as some other modems+The firmware on it is fairly restrictive, but not as bad as some other modems. Appears to run some pretty old software.
  
 /*****/ /*****/
Line 12: Line 12:
 /*****/ /*****/
  
-{{ media:example:genericrouter1.png?200|Generic Router}}+{{ media:zyxel:VMG8825-T50.jpg?200|VMG8825-T50}}
  
  
Line 43: Line 43:
 ===== Hardware highlights ===== ===== Hardware highlights =====
 ^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^ ^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^
-EXAMPLE RT3052 384 MHz   |  64 MiB  |  8 MiB   4x 10/100  |  bgn    1x 2.0  |   Yes    |      |+Econet EN7516 900 MHz   |  512 MiB  |  2Gb  |  1+4x 10/100/1000   bgn/ac   |  1x 2.0, 1x 3.0  |   Yes    |   no    |
  
  
Line 111: Line 111:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-^ Architecture     EXAMPLE MIPS                             +^ Architecture     | MIPS                                     
-^ Vendor           EXAMPLE Ralink                           +^ Vendor           [[https://www.mediatek.com/|MediaTek]]/EcoNet                          
-^ Bootloader       EXAMPLE U-Boot                           +^ Bootloader       ZyXEL zloader v1.4.4                     
-^ System-On-Chip   EXAMPLE Ralink RT3052 MIPS 24K V4.12   | +^ System-On-Chip   [[http://www.econet-inc.com/product/view?product_category_id=2&product_id=62|EcoNet EN7516]] - MIPS32® 1004K™ V4.12   | 
-^ CPU/Speed        | EXAMPLE 451 MHz                          +^ CPU/Speed        | Dual core 2x900 MHz                                  
-^ Flash-Chip       EXAMPLE unkown                           +^ Flash-Chip       [[https://www.winbond.com/hq/product/code-storage-flash-memory/qspinand-flash/index.html?__locale=en&partNo=W25M02GV|Winbond W25M02GV]] 
-^ Flash size       EXAMPLE 8 MiB                            +^ Flash size       2Gb                                      |  
-^ RAM              | EXAMPLE 64 MiB                           +^ RAM              | 512MB                                    
-^ Wireless         EXAMPLE RT2860v2 2.4GHz 802.11bgn        +^ Wireless         [[https://www.mediatek.com/products/broadbandWifi/mt7615|MT7615]] Wi-Fi 5 (b/g/n/ac) 
-^ Ethernet         EXAMPLE 10/100 Mbit/s w/ vlan support    | +^ Ethernet         1x WAN, 4x LAN (10/100/1000Mbit/s w/ vlan support   | 
-^ Switch           EXAMPLE Qualcomm Atheros QCA8337         +^ Switch           Built in to SoC                          
-^ USB              | EXAMPLE 1x 2.0                           | +^ USB              | 1x 2.0, 1x 3.0                           | 
-^ Serial           EXAMPLE [[#Serial|Yes]]                  +^ Serial           | [[#Serial|Yes]]                          
-^ JTAG             EXAMPLE [[#JTAG|Not populated]]          |+^ JTAG             No                                       |
  
  
Line 138: Line 138:
  
 ==== Photos ==== ==== Photos ====
-/* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ +{{media:zyxel:vmg8825-t50-front.jpg?400|}}
-/* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ +
-/* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}}                                  */ +
-/* Thanks, your wiki administration - Oct. 2015 */+
  
-**Insert photo of front of the casing**+{{media:zyxel:vmg8825-t50-back.jpg?400|}}
  
-**Insert photo of back of the casing** +{{media:zyxel:vmg8825-t50-pcb.jpg?400|}}
- +
-**Insert photo of backside label** +
- +
-**Insert photo of PCB**+
  
 ==== Opening the case ==== ==== Opening the case ====
  
-<WRAP BOX> +You only need to remove to Philips screws at the back of the unit. 
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feetadhesive labels, screws, ...// +After that, you will be able to separate the back and front plastic pieces of the device. 
-</WRAP>+The parts are still hold together with clipsif you insert a small plastic part in the gap between the two pieces you should be able to pry it open fairly easily.
  
 ==== Serial ==== ==== Serial ====
Line 168: Line 161:
 ^ Serial connection parameters\\ for ZyXEL VMG8825-T50  | 115200, 8N1 | ^ Serial connection parameters\\ for ZyXEL VMG8825-T50  | 115200, 8N1 |
  
-==== JTAG ==== 
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. 
- 
-How to connect to the JTAG Port of this specific device:\\ 
-**Insert photo of PCB with markings for JTAG port** 
  
 ===== Bootlogs ===== ===== Bootlogs =====
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +BGA IC 
 +Xtal:1 
 +DDR3 init. 
 +DRAMC init done.  
 +Calculate size. 
 +DRAM size=512MB 
 +Set new TRFC. 
 +ddr-1333 
 + 
 + 
 +7516DRAMC V1.0 (0) 
 + 
 +Press 'x' or 'b' key in 1 secs to enter or skip bootloader upgrade. 
 + 
 + 
 +EN751627 at Fri May 15 15:20:05 CST 2020 version 1.1 free bootbase 
 + 
 +Set SPI Clock to 50 Mhz 
 +spi_nand_probe: mfr_id=0xef, dev_id=0xab 
 +Using Flash ECC. 
 +Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25M02G, Flash Size=0x10000000 
 +bmt pool size: 163  
 +BMT & BBT Init Success  
 + 
 + 
 + 
 +ZyXEL zloader v1.4.4 (05/15/2020 - 15:20:04) 
 +Multiboot client version: 2.4 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +  GE Rext AnaCal Done! (4)(0x1c)   
 + 
 + 
 +Hit any key to stop autoboot: 
 + 
 + main tclinux.bin have ZYXEL trx header! 
 + 
 + 
 + main tclinux.bin Start to decrypt RSA! 
 + 
 + 
 +==> boot flag = 0 
 +from main 
 +Decompress to 80002000 free_mem_ptr=80950000 free_mem_ptr_end=807B0000 
 +Uncompressing [LZMA] ...  done. 
 +Initializing cgroup subsys cpuset 
 +Initializing cgroup subsys cpu 
 +Initializing cgroup subsys cpuacct 
 +Linux version 3.18.21 (howard@TWPCZT02587-03) (gcc version 4.6.3 (OpenWrt GCC 4.6.3 unknown) ) #2 SMP Fri May 15 16:39:01 CST 2020 
 +memsize:432MB 
 +EcoNet EN751627 SOC prom init 
 +bootconsole [early0] enabled 
 +CPU0 revision is: 0001992f (MIPS 1004Kc) 
 +Determined physical RAM map: 
 + memory: 1affe000 @ 00002000 (usable) 
 +Wasting 64 bytes for tracking 2 unused pages 
 +Zone ranges: 
 +  Normal   [mem 0x00002000-0x1affffff] 
 +Movable zone start for each node 
 +Early memory node ranges 
 +  node   0: [mem 0x00002000-0x1affffff] 
 +Initmem setup node 0 [mem 0x00002000-0x1affffff] 
 +Detected 3 available secondary CPU(s) 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +PERCPU: Embedded 9 pages/cpu @81364000 s6272 r8192 d22400 u36864 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 109726 
 +Kernel command line:  
 +log_buf_len individual max cpu contribution: 4096 bytes 
 +log_buf_len total cpu_extra contributions: 12288 bytes 
 +log_buf_len min size: 16384 bytes 
 +log_buf_len: 32768 bytes 
 +early log buf free: 14280(87%) 
 +PID hash table entries: 2048 (order: 1, 8192 bytes) 
 +Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) 
 +Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +Writing ErrCtl register=0007c95f 
 +Readback ErrCtl register=0007c95f 
 +nmi base is 813fc200 
 +Memory: 431420K/442360K available (4925K kernel code, 216K rwdata, 936K rodata, 240K init, 541K bss, 10940K reserved) 
 +SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +Hierarchical RCU implementation. 
 +NR_IRQS:64 
 + 
 + 
 +tc3162_time_init: Init bus timeout and watchdog 
 + 
 +CPU frequency 900.00 MHz 
 +plat_time_init: Entered, mips_timer_ack ptr is [80007378] 
 + 
 + Using 200.000 MHz high precision timer. 
 +r4k_clockevent_init: setup_irq OK, irq is [52] 
 + 
 +console [ttyS0] enabled 
 +console [ttyS0] enabled 
 +bootconsole [early0] disabled 
 +bootconsole [early0] disabled 
 +Calibrating delay loop... 589.00 BogoMIPS (lpj=2945024) 
 +pid_max: default: 32768 minimum: 301 
 +Security Framework initialized 
 +Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +Initializing cgroup subsys devices 
 +Initializing cgroup subsys freezer 
 +Initializing cgroup subsys net_cls 
 +Initializing cgroup subsys blkio 
 +Initializing cgroup subsys debug 
 +34K sync es set to 0. 
 +Config7: 0x80090500 
 +launch: starting cpu1 
 +launch: cpu1 gone! 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +CPU1 revision is: 0001992f (MIPS 1004Kc) 
 +Synchronize counters for CPU 1: done. 
 +launch: starting cpu2 
 +launch: cpu2 gone! 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +CPU2 revision is: 0001992f (MIPS 1004Kc) 
 +Synchronize counters for CPU 2: done. 
 +launch: starting cpu3 
 +launch: cpu3 gone! 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +CPU3 revision is: 0001992f (MIPS 1004Kc) 
 +Synchronize counters for CPU 3: done. 
 +Brought up 4 CPUs 
 +devtmpfs: initialized 
 +NET: Registered protocol family 16 
 +PCIe 7516 PHY init   
 +PCIe driver version: 751627.1.20170815 
 +EN751627 pcie_init 
 +check pcie link up status:  
 +isRC0_LINKUP=1  
 +isRC1_LINKUP=1  
 +registering PCI controller with io_map_base unset 
 +Initializing Ecnt Event Netlink Socket 
 + 
 +Initializing Econet Event Netlink Socket nl_sk = 9ad58800 
 + 
 +usbcore: registered new interface driver usbfs 
 +usbcore: registered new interface driver hub 
 +usbcore: registered new device driver usb 
 +PCI host bridge to bus 0000:00 
 +pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] 
 +pci_bus 0000:00: root bus resource [io  0x1f600000-0x1f61ffff] 
 +pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] 
 +pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff] 
 +pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] 
 +pci 0000:00:00.0: PCI bridge to [bus 01] 
 +pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff] 
 +pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit] 
 +pci 0000:00:01.0: PCI bridge to [bus 02] 
 +pci 0000:00:01.0:   bridge window [mem 0x20100000-0x201fffff] 
 +NET: Registered protocol family 8 
 +NET: Registered protocol family 20 
 +Switched to clocksource MIPS 
 +NET: Registered protocol family 2 
 +TCP established hash table entries: 4096 (order: 2, 16384 bytes) 
 +TCP bind hash table entries: 4096 (order: 3, 32768 bytes) 
 +TCP: Hash tables configured (established 4096 bind 4096) 
 +TCP: reno registered 
 +UDP hash table entries: 256 (order: 1, 8192 bytes) 
 +UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) 
 +NET: Registered protocol family 1 
 + 
 + mt7512_pcie_fixup: 0x1438 = 20000014  
 + mt7512_pcie_rc0_retrain: 80 = 01408c12 80 = 01608c12 
 +RC0 Link Traing Result: 10120008 
 + mt7512_pcie_fixup: 0x3438 = 20100014  
 + mt7512_pcie_rc1_retrain: 80 = 01408c12 80 = 01608c12 
 +RC1 Link Traing Result: 10120008 
 +TC3162 hardware watchdog module loaded. 
 +USB overcurrent protection. 
 +futex hash table entries: 1024 (order: 4, 65536 bytes) 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +ntfs: driver 2.1.31 [Flags: R/W DEBUG]. 
 +msgmni has been set to 842 
 +io scheduler noop registered (default) 
 +ttyS0 at I/O 0xbfbf0003 (irq = 5, base_baud = 7200) is a TC3162 
 +ECNT ring buffer init success 
 +Init UART2 and UART3, still need to trun on for using. 
 +ttyS20 at I/O 0xbfbf0300 (irq = 4, base_baud = 7200) is a TC3162 
 +ttyS30 at I/O 0xbfbe1000 (irq = 3, base_baud = 7200) is a TC3162 
 +brd: module loaded 
 + 
 +SPI Flash Init Start 
 +Found no SPI flash device 
 +IS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6) 
 +Set SPI Clock to 50 Mhz 
 +spi_nand_probe: mfr_id=0xef, dev_id=0xab 
 +Using Flash ECC. 
 +Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25M02G, Flash Size=0x10000000 
 +spi nand flash 
 +tc3162: flash device 0x01000000 at 0x1c000000 
 +EN7512 mtd init: spi nand probe enter 
 +[spi_nand_setup] : Enter  
 +nand: device found, Manufacturer ID: 0xef, Chip ID: 0xab 
 +nand: Unknown _SPI_NAND_DEVICE_ID_W25M02G 
 +nand: 256MiB, SLC, page size: 2048, OOB size: 64 
 +nand_scan_ident ok 
 +[spi_nand_setup]: chip size =  0x10000000, erase_shift=0x11 
 +bmt pool size: 163  
 +BMT & BBT Init Success  
 + 
 +parsing <0[bootloader],0[romfile],56M[tclinux],-[tclinux_slave],1M[wwan],4M[data],1M[rom-d],118M[misc]> 
 +partition 11: name <misc>, offset ffffffff, size 7600000, mask flags 0 
 +partition 10: name <rom-d>, offset ffffffff, size 100000, mask flags 0 
 +partition 9: name <data>, offset ffffffff, size 400000, mask flags 0 
 +partition 8: name <wwan>, offset ffffffff, size 100000, mask flags 0 
 +partition 7: name <tclinux_slave>, offset ffffffff, size ffffffff, mask flags 0 
 +partition 4: name <tclinux>, offset ffffffff, size 3800000, mask flags 0 
 +partition 1: name <romfile>, offset ffffffff, size fffffffe, mask flags 0 
 +partition 0: name <bootloader>, offset ffffffff, size fffffffe, mask flags 0 
 +Creating 13 MTD partitions on "EN7512-SPI_NAND": 
 +0x000000000000-0x000000040000 : "bootloader" 
 +0x000000040000-0x000000080000 : "romfile" 
 +0x000000080000-0x00000028ccdd : "kernel" 
 +mtd: partition "kernel" doesn't end on an erase block -- force read-only 
 +0x00000028ccdd-0x0000016ccce1 : "rootfs" 
 +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 
 +0x000000080000-0x000003880000 : "tclinux" 
 +0x000003880000-0x000003a8cc01 : "kernel_slave" 
 +mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only 
 +0x000003a8cc01-0x000004e0cc05 : "rootfs_slave" 
 +mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only 
 +0x000003880000-0x000006ee0000 : "tclinux_slave" 
 +0x000006ee0000-0x000006fe0000 : "wwan" 
 +0x000006fe0000-0x0000073e0000 : "data" 
 +0x0000073e0000-0x0000074e0000 : "rom-d" 
 +0x0000074e0000-0x00000eae0000 : "misc" 
 +0x00000eae0000-0x00000eba0000 : "reservearea" 
 + 
 + 
 +rootfs 
 +PPP generic driver version 2.4.2 
 +PPP BSD Compression module registered 
 +PPP Deflate Compression module registered 
 +NET: Registered protocol family 24 
 +usbcore: registered new interface driver cdc_acm 
 +cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
 +usbcore: registered new interface driver usbserial 
 +usbcore: registered new interface driver usbserial_generic 
 +usbserial: USB Serial support registered for generic 
 +usbcore: registered new interface driver cypress_m8 
 +usbserial: USB Serial support registered for DeLorme Earthmate USB 
 +usbserial: USB Serial support registered for HID->COM RS232 Adapter 
 +usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter 
 +usbcore: registered new interface driver ftdi_sio 
 +usbserial: USB Serial support registered for FTDI USB Serial Device 
 +hidraw: raw HID events driver (C) Jiri Kosina 
 +usbcore: registered new interface driver usbhid 
 +usbhid: USB HID core driver 
 +GACT probability NOT on 
 +u32 classifier 
 +    Actions configured 
 +Netfilter messages via NETLINK v0.30. 
 +nf_conntrack version 0.5.0 (6740 buckets, 26960 max) 
 +ctnetlink v0.93: registering with nfnetlink. 
 +nf_conntrack_rtsp v0.7 loading 
 +nf_nat_rtsp v0.7 loading 
 +nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net> 
 +nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org> 
 +xt_time: kernel timezone is -0000 
 +ip_tables: (C) 2000-2006 Netfilter Core Team 
 +ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully 
 +TCP: cubic registered 
 +Initializing XFRM netlink socket 
 +NET: Registered protocol family 10 
 +sit: IPv6 over IPv4 tunneling driver 
 +NET: Registered protocol family 17 
 +NET: Registered protocol family 15 
 +bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
 +8021q: 802.1Q VLAN Support v1.8 
 +tc3162ser_startup  
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:3. 
 +Freeing unused kernel memory: 240K (805f4000 - 80630000) 
 +mknod: /dev/ppp: File exists 
 +mknod: /dev/ptmx: File exists 
 +mknod: /dev/ptyp0: File exists 
 +mknod: /dev/ptyp1: File exists 
 +mknod: /dev/ptyp2: File exists 
 +mknod: /dev/ttyp0: File exists 
 +mknod: /dev/ttyp1: File exists 
 +mknod: /dev/ttyp2: File exists 
 +mknod: /dev/watchdog: File exists 
 +mknod: /dev/ttyS20: File exists 
 +mknod: /dev/ttyS30: File exists 
 +mknod: /dev/hwnat0: File exists 
 +mknod: /dev/acl0: File exists 
 +mknod: /dev/ac0: File exists 
 +mknod: /dev/mtr0: File exists 
 +**************prepare var***************** 
 +busybox init and set aff 
 + 
 +init started: BusyBox v1.20.1 (2020-05-15 14:51:49 CST) 
 +chmod: /userfs/profile.cfg: Read-only file system 
 +TCSUPPORT_IPV6 
 +/dev created at preinit 
 +Reading MT7615 2.4G EEPROM from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=1024 tcoffset=0 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/RT30xxEEPROM.bin ...  
 +Reading MT7615 5G EEPROM from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=1024 tcoffset=131072 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/Wireless/RT2860AP_AC/RT30xxEEPROM.bin ...  
 +Reading MT7615 2.4G CALDATA from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=36864 tcoffset=4096 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/CALDATA_default.bin ...  
 +Reading MT7615 5G CALDATA from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=36864 tcoffset=135168 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/Wireless/RT2860AP_AC/CALDATA_default.bin ...  
 +insmod ETH_LAN driver 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +install dmt for mt7510 
 +TCSUPPORT_WLAN 
 +TCSUPPORT_WLAN_MT7615 
 +TCSUPPORT_MAP_FILTER 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +**************lan port init***************** 
 +four ports 
 +device eth0 is not a slave of br0 
 +taskset: invalid number '0x8' 
 +date: invalid date '010100002012' 
 +/etc/init.d/rcS: line 1457: /userfs/bin/wpa_supplicant: not found 
 +CO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1 
 +MTK DSP support 
 +voip_loader start 
 +START CHECK ZARLIN ZSI 
 +[SLIC] le9642 
 +Loading le9642,slic num:1 
 +Loading common 
 +init mod-ksocket 
 +init mod-acodec 
 +init mod-foip3 
 +voip loader end 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +wan ether support 
 +TCSUPPORT_WLAN_SW_RPS 
 +VDSP_GetInstance:278 
 +/proc/net/skbmgr_4k_limit ??? 
 +Jan  1 00:00:28 crond[433]: crond: crond (busybox 1.20.1) started, log level 8 
 + 
 +START disable Lan and Wan... 
 +ln: /dev/log: File exists 
 +1970-01-01 00:00:29 dnsmasq<454>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr23 successfully 
 + 
 +dnsmasq: unknown user or group: root 
 +1970-01-01 00:00:29 zcmd<459>, zcmd.c:6172, main(), INFO: Start ZCMD daemon 
 +1970-01-01 00:00:29 zcmd<460>, uitimer.c:95, UITimerProc(), INFO: thread starts 
 +killall: zywifid_run.sh: no process killed 
 +zcfg_schema.bin 
 +killall: zywifid: no process killed 
 +1970-01-01 00:00:30 zywifid<474>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 40 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr40 successfully 
 +*reg=0000001c value:68106810 
 + 
 +Load NComm TMS Module. 
 +zywifid> [ALERT] wifi_module_init:1082: load libzywl_001_ecn.so .......... 
 +Find MTD Device /dev/mtd1 with name romfile. 
 +mtd.oobsize 64 mtd.writesize 2048 
 +romfile type ffff 
 +romfile size 4294967295 
 +romfile crc 65535 
 +zywifid> [ALERT] main:1211: Check and fix Wifi MAC address...... 
 + 
 +Please press Enter to activate this console. rm: can't remove '/tmp/wifiScanTime*': No such file or directory 
 +MAX Number of Interface Stack is 254 
 +Enter zcmdTr98MapTableInit 
 +zcmdTr98ParmAttrNodeBuild: 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 3,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=1 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 4,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=2 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 5,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=3 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 6,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=4 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 7,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=5 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 8,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=6 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 9,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=7 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 10,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=8 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 11,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=9 
 +zcmdTr98ParmAttrNodeBuild: obj 64788 1,0,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=10 
 +zcmdTr98ParmAttrNodeBuild: obj 14568 0,0,0,0,0, nSetParmAttr 2 
 +setParmAttrNodeLst Add, n=11 
 +zcmdTr98ParmAttrNodeBuild: obj 16920 0,0,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=12 
 +zcmdTr98ParmAttrNodeBuild: obj 112704 0,0,0,0,0, nSetParmAttr 2 
 +setParmAttrNodeLst Add, n=13 
 +zcmdTr98ParmAttrNodeBuild: obj 87144 1,0,0,0,0, nSetParmAttr 3 
 +setParmAttrNodeLst Add, n=14 
 +mainDhcpPoolInfo[0]= 1 [1 0] 
 +mainDhcpPoolInfo[1]= 0 [0 0] 
 +mainDhcpPoolInfo[2]= 0 [0 0] 
 +mainDhcpPoolInfo[3]= 0 [0 0] 
 +mainDhcpPoolInfo[4]= 0 [0 0] 
 +mainDhcpPoolInfo[5]= 0 [0 0] 
 +mainDhcpPoolInfo[6]= 0 [0 0] 
 +mainDhcpPoolInfo[7]= 0 [0 0] 
 +mainDhcpPoolInfo[8]= 0 [0 0] 
 +mainDhcpPoolInfo[9]= 0 [0 0] 
 +mainDhcpPoolInfo[10]= 0 [0 0] 
 +mainDhcpPoolInfo[11]= 0 [0 0] 
 +mainDhcpPoolInfo[12]= 0 [0 0] 
 +mainDhcpPoolInfo[13]= 0 [0 0] 
 +mainDhcpPoolInfo[14]= 0 [0 0] 
 +mainDhcpPoolInfo[15]= 0 [0 0] 
 +zcmdTr98MapTableInit End 
 +1970-01-01 00:00:31 zcmd<459>, zcmd.c:6279, main(), INFO: tr98 map table inited 
 +zcmdReleaseTr98ObjParamMapping: no this object mapping 
 +zcmdReleaseTr98ObjParamMapping: object 86172 has mapping object 
 +zcmdReleaseTr98ObjParamMapping: object index attr 
 +zcmdReleaseTr98ObjParamMapping: object index 1 
 +zcmdReleaseTr98ObjParamMapping: Release object 86172 mapping with data 
 +zcmdTr98MappingGrpQry: obj 86172 1,0,0,0,0,0 queried group 0 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 86172, List obj 86172 
 +zcmdTr98MappingGrpQry: obj 87144 1,0,0,0,0,0 queried group 0 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87144, List obj 87144 
 +setParmAttrNodeLst Delete, n=13 
 +=====zcmdTr98MtObjDelete=====seqnum=181 
 +=====zcmdTr181MtObjDelete=====oid=87144 
 +=====zcmdTr98MtObjDelete=====seqnum=180 
 +=====zcmdTr181MtObjDelete=====oid=86172 
 +1970-01-01 00:00:31 zcmd<459>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 1 bind server socket 4 on /var/lib/.sock/zcfg_sockaddr1 successfully 
 +1970-01-01 00:00:31 zcmd<501>, zcmd_config_apply.c:1557, zcmdModuleConfigHandleTask(), INFO: thread starts 
 +1970-01-01 00:00:31 zcmd<501>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 69 bind server socket 5 on /var/lib/.sock/zcfg_sockaddr69 successfully 
 +1970-01-01 00:00:31 zcmd<500>, zcmd_config_apply.c:1639, zcmdConfigApplyTask(), INFO: thread starts 
 +1970-01-01 00:00:31 zcmd<500>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 67 bind server socket 6 on /var/lib/.sock/zcfg_sockaddr67 successfully 
 +/bin/sh: dsldiagd: not found 
 +1970-01-01 00:00:31 esmd<511>, esmd.c:2126, main(), INFO: ESMD Start 
 +ESMD msg server init... 
 +1970-01-01 00:00:31 esmd<511>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 2 bind server socket 0 on /var/lib/.sock/zcfg_sockaddr2 successfully 
 +[ESMD] Initial kernel monitor ... 
 +kernelFd=7 
 +1970-01-01 00:00:31 zcmd<519>, zcmd.c:5637, zcmdActiveZtr69(), INFO: thread starts 
 +Find MTD Device /dev/mtd8 with name wwan. 
 +mtd.oobsize 64 mtd.writesize 2048 
 +FW_WATCHER Start 
 +Notice: zyUtilUpdateWWANPackage, No WWAN Package in Flash! 
 +wwanpackage info: revision is 1.18 
 +1970-01-01 00:00:31 esmd<526>, esmd.c:1992, timer_thread(), INFO: thread starts 
 +zyUtilTcpSvrInit 
 +1970-01-01 00:00:31 esmd<525>, esmd.c:1611, _esmd_thread(), INFO: ESMD ground thread starts 
 +1970-01-01 00:00:31 esmd<525>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 66 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr66 successfully 
 +1970-01-01 00:00:31 esmd<524>, esmd.c:1603, _esmd_thread(), INFO: ESMD usr config thread starts 
 +zcmdBeInit(): DL opening... 
 +Initial begui_customization.... 
 +Initial bedevice.... 
 +Chain MACFILTER already exists. 
 +devObj->DeviceSummary = InternetGatewayDevice:1.4[](Baseline:1,EthernetLAN:2,WiFiLAN:1,ADSLWAN:1,ADSL2WAN:1,VDSL2WAN:1,PTMWAN:1,EthernetWAN:1,QoS:1,Time:1,IPPing:1),VoiceService:1[](Endpoint:1,SIPEndpoint:1,TAEndpoint:1) 
 +Initial bedsl.... 
 +sh: you need to specify whom to kill 
 +Initial beatmlink.... 
 +Initial beptmlink.... 
 +Jan  1 00:00:33 crond[637]: crond: crond (busybox 1.20.1) started, log level 8 
 + 
 +Initial belog.... 
 +killall: tty_log_echo: no process killed 
 +killall: mailsend: no process killed 
 +Set interval time = 60 second 
 +killall: syslog-ng: no process killed 
 +Error resolving user; user='root' 
 +Initial besysinfo.... 
 +Initial beaccount.... 
 +mkdir: can't create directory '/var/tmp': File exists 
 +chmod: /data/zcfg_predef.json: No such file or directory 
 +chmod: /data/zcfg_predef.json: No such file or directory 
 +Initial bedevinfo.... 
 +1970-01-01 00:00:35 zcmd<518>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendto /var/lib/.sock/zcfg_sockaddr9, errno = 2(No such file or directory), srcEid = 1, dstEid = 9, type = 273 without reply, oid = 0 
 +1970-01-01 00:00:35 zcmd<518>, zcfg_msg.c:822, zcfg_msg_sendAndGetReply(), ERROR: fail to send message. ret = -5 
 +Initial beethlink.... 
 +Initial beethintf.... 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +Initial bewifi_radio.... 
 +Initial bewifi_ssid.... 
 +Initial bewifi_ap.... 
 +Initial bebridging.... 
 +Initial bebridgingbr.... 
 +Initial bebridgePort.... 
 +device ra0 is not a slave of br0 
 +interface ra1 does not exist! 
 +device rai0 is not a slave of br0 
 +interface rai1 does not exist! 
 +interface rai3 does not exist! 
 +Initial bebridgeFilter.... 
 +Initial bewifi.... 
 +Initial beipiface.... 
 +zywifid:Config> [ERROR] zyWifiUpdateLanInfo:404: No wifi interface on module(ECN). 
 +/bin/sh: zy1905App: not found 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcfgBeWanInitIntfMark : Enter 
 +zcfgBeWanInitIntfMark: Init IfMark Done !! 
 +Initial benatIntf.... 
 +modprobe: module nf_nat_ftp not found in modules.dep 
 +modprobe: module nf_conntrack_ftp not found in modules.dep 
 +modprobe: module nf_nat_ftp not found in modules.dep 
 +ftp switch turn on 
 + 
 +sip switch turn on 
 + 
 +modprobe: module nf_conntrack_rtsp not found in modules.dep 
 +rtsp switch turn on 
 + 
 +pptp switch turn on 
 + 
 +Initial bev4addr.... 
 +Initial bev6addr.... 
 +Initial bev6prefix.... 
 +Initial beusbhost.... 
 +Initial beusbintf.... 
 +Initial beusbport.... 
 +Initial berouter.... 
 +Initial berainfo.... 
 +Initial bedhcp4_server.... 
 +Initial bedhcp4_serverpool.... 
 +Initial bedhcp4_serverpool_staticaddr.... 
 +Initial bedhcp4_serverpool_option.... 
 +Initial bedhcp4_serversubnet.... 
 +restart DNSMASQ... 
 +killall: dnsmasq: no process killed 
 +1970-01-01 00:01:11 dnsmasq<1222>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr23 successfully 
 +Initial bedhcp4_relay.... 
 +Initial bedhcp6_server.... 
 +Initial bedhcp6_serverpool.... 
 +Initial bevlanTerm.... 
 +Initial bepppiface.... 
 +zcmdTr98SyncTr98WANConnectNum: obj 63672 seqnum 218 
 +Initial bepppifaceipcp.... 
 +Initial bedhcp4_client.... 
 +Initial bedhcp6_client.... 
 +1970-01-01 00:01:11 zcmd<518>, be_dhcp6_client_config_init.c:29, beConfigBoot(), INFO: boot Dhcp6 Client 
 +Initial beradvd.... 
 +Initial bedns.... 
 +Initial bedns_route.... 
 +Initial bedns_server.... 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708 
 +Initial benat_port_map.... 
 +Initial benat_port_trigger.... 
 +Initial benat_addr_mapping.... 
 +Initial begre_tunnel.... 
 +modprobe ip_gre 
 +modprobe: module ip_gre not found in modules.dep 
 +Initial besessCtl.... 
 +/bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory 
 +/bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directory 
 +Initial befirewall.... 
 +getL1InterfaceUpstream: 561 USB.Interface.1 
 +getL1InterfaceUpstream: 561 USB.Interface.1 
 +Initial betr69.... 
 +Initial beddns.... 
 +Initial betime.... 
 +Initial bediagnostic.... 
 +killall: tmsctl: no process killed 
 +Initial beschedule.... 
 +Initial beparenCtl.... 
 +Initial beqos.... 
 +Initial beqosQueue.... 
 +Initial beqosClass.... 
 +Initial beqosShaper.... 
 +Initial beqosPolicer.... 
 +Initial be6rd.... 
 +Initial beigmp.... 
 +cp: can't stat '/etc/mcpd_igmp.conf': No such file or directory 
 +beigmp! 
 +/bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent directory 
 +restart DNSMASQ... 
 +[beIgmpCreateCfg](122) Failed. 
 +Initial besnmp.... 
 +Boot SNMP 
 +Initial bemld.... 
 +1970-01-01 00:01:13 dnsmasq<1314>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr23 successfully 
 +cp: can't stat '/etc/mcpd_mld.conf': No such file or directory 
 +cat: can't open '/var/run/ecmh.pid': No such file or directory 
 +sh: you need to specify whom to kill 
 +Initial bevcAutoHunt.... 
 +Initial bevlanAutoHunt.... 
 +Initial beupnp.... 
 +Initial bemacfilter.... 
 +Initial bemacfilter_whitelist.... 
 +Initial beuserinterface.... 
 +Initial beremoMgmt.... 
 +Initial bechangehosticon.... 
 +Initial behosts.... 
 +Initial behostshost.... 
 +Initial becert.... 
 +Initial beportmirror.... 
 +Initial bedslite.... 
 +Initial beSTBVendorID.... 
 +Initial berip.... 
 +killall: ripd: no process killed 
 +writing RSA key 
 +Initial betr64.... 
 +Initial bewwanbackup.... 
 +Initial besamba.... 
 +Initial http with port(443), SSL enable. 
 +Initial http with port(80), SSL disable. 
 +1970-01-01 00:01:15 zhttpd<1347>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 15 bind server socket 58 on /var/lib/.sock/zcfg_sockaddr15 successfully 
 +wwanbackup info: WWANBACKUP start 
 +wwanbackup info: WWANBACKUP_DEBUG is 0 
 +starting smbd. 
 +samba start ok 
 +Initial bevoiceSrv.... 
 +Initial bevoiceCap.... 
 +Initial bevoiceCapSip.... 
 +bePppIfaceSet: PPP.Interface.1 
 +bePppIfaceSet : Enable new or enable existing 
 +Initial bevoiceCapCodec.... 
 +Initial bevoiceCommon.... 
 +Initial bevoiceProf.... 
 +Initial bevoiceProfSip.... 
 +Initial bevoiceProfFaxT38.... 
 +Initial bevoiceProfNumberingPlan.... 
 +Initial bevoiceProfNumberingPlanPrefixInfo.... 
 +Initial bevoiceProfRTP.... 
 +Initial bevoiceProfRTPSRTP.... 
 +Initial bevoiceLine.... 
 +Initial bevoiceLineSip.... 
 +Initial bevoiceLineProc.... 
 +Initial bevoiceLineCallingFeatures.... 
 +Initial bevoiceLineCodecList.... 
 +Initial bevoiceLineStats.... 
 +Initial bevoiceLineRinger.... 
 +Initial bevoiceLineRingerDescription.... 
 +Initial bevoicePhyIntf.... 
 +Initial bevoiceSpeedDialBookList.... 
 +Initial bevoiceCallPolicyBook.... 
 +Initial bevoiceCallPolicyBookList.... 
 +Initial bevoiceCallStatus.... 
 +Initial bednsentry.... 
 +Initial bezx.... 
 +Initial bedlna.... 
 +Initial bevlangroup.... 
 +Initial beTFTPServerName.... 
 +Initial bespeedtest.... 
 +Initial beoneconnect.... 
 +Initial beoneconnectPCRule.... 
 +Initial bePwrMgmt.... 
 +Initial bewifi_easymesh.... 
 +Initial bewifi_onessid.... 
 +Back-end module init finished 
 +Initial USB driver... 
 +turn on ztr69 
 +zcfgFeTr98QueryHandleRoutInit 
 +cwmp_get_acsInfo: reset redirect server 
 +1970-01-01 00:01:18 ztr69<1557>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 9 bind server socket 59 on /var/lib/.sock/zcfg_sockaddr9 successfully 
 +/bin/sh: /etc/init.d/mcpd.sh: not found 
 +START enable Lan and Wan... 
 +/bin/sh: /usr/sbin/zy1905: not found 
 +/bin/sh: /usr/sbin/zy1905Monitor: not found 
 +rm: can't remove '/tmp/app_sock': No such file or directory 
 +TR181 object IP.Interface.1 
 +writing RSA key 
 +bridge name br0 
 +Initial http with port(20443), SSL enable. 
 +database_init : /data/netprb_db_ver 
 +database_init : database_ver 18 
 +database_init : Create Device table 
 +database_init : Create Sub Interface table 
 +database_init : Create L2 Device Functions table 
 +arp_init     : arp_event->event_id 1 
 +layer2_init  : layer2_event->event_id 2 
 +oui_init     : oui_event->event_id 3 
 +ethlink_init : ethlink_event->event_id 4 
 +zy1905_init  : zy1905_event->event_id 5 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:22 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:22 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 +1970-01-01 00:01:23 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:23 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +[/sbin/usb-hotplug.sh] add /var/usb/usb1 
 +1970-01-01 00:01:24 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:24 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:25 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:25 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +1970-01-01 00:01:26 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:26 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:27 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:27 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:27 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +1970-01-01 00:01:28 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:28 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:29 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:29 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:29 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:30 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:30 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:31 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:31 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:31 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:32 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:32 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:33 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:33 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:33 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:34 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:34 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:35 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:35 zcmd<459>, zcmd.c:6410, main(), WARNING: process msg type = 2 with reply, oid = 65676, from EID = 17 by 14553 ms 
 +zyExtRemoteMgmtSrvObjGet : Enter 
 +l3fwdObjGet : Enter 
 +l3fwdGetDfGwByRtTable: enter, 4 
 +DeviceDiscRespPayload={ 
 +   "ApiName": "ZYXEL RESTful API", 
 +   "ModelName": "VMG8825-T50", 
 +   "SoftwareVersion": "V5.50(ABPY.1)b11", 
 +   "DeviceMode": "Router", 
 +   "SupportedApiVersion":
 +     { 
 +       "ApiVersion": "1.0", 
 +       "LoginURI": "\/api\/v1\/UserLogin", 
 +       "Protocol": "HTTPS", 
 +       "HttpsPort": 20443 
 +     } 
 +   ], 
 +   "MAC": "08:26:97:DA:DD:80" 
 + } 
 +1970-01-01 00:01:35 zhttpd_rest<1628>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 77 bind server socket 13 on /var/lib/.sock/zcfg_sockaddr77 successfully 
 +hotplug:beUsbPortSet: USB Port Alias is cpe- 
 +hotplug:beUsbPortSet: USB Port Type is Device 
 +db_init() Open database: not an error 
 +APP Agent UDP socket ready! 
 +l3fwdGetDfGwByRtTable: ifname =   
 +l3fwdGetDfGwByRtTable: No find default gateway interface!! 
 +Restarting ZyIMS VoIP 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 + 
 +ppe cmd done! 
 +killall: voiceApp: no process killed 
 + 
 +ppe cmd done! 
 +killall: mm.exe: no process killed 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +killall: icf.exe: no process killed 
 + 
 +ppe cmd done! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 + 
 +ppe cmd done! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +done 
 +device ra0 is already a member of a bridge; can't enslave it to bridge br0. 
 +device ra1 is already a member of a bridge; can't enslave it to bridge br0. 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 +bePtmLinkStatGet : Enter 
 + 
 +============================================================================ 
 +UPnP Mapping table Dump: 
 +TR98 Object Name                                                            : UPnP service Id 
 +InternetGatewayDevice.Layer3Forwarding                                      : urn:upnp-org:serviceId:Layer3Forwarding.1 
 +============================================================================ 
 + 
 +l3fwdObjGet : Enter 
 +l3fwdGetDfGwByRtTable: enter, 4 
 +/bin/sh: zy1905App: not found 
 +l3fwdGetDfGwByRtTable: ifname =   
 +l3fwdGetDfGwByRtTable: No find default gateway interface!! 
 +[/sbin/usb-hotplug.sh] add /var/usb/usb2 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +[MM] main(): getpid = 1882 
 +AppRegisterSignal(): mm.exe pid = 1882 
 +UITimer_Init()... 
 +[MM]dspDriverDeinit(): DSP & Phone Port driver is already De-initialized ==> skip the action!! 
 +UITimerProc(): The UI Timer System (thread task: 'vo-USR-UItimer', pid=1882) is running... 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +AppRegisterSignal(): voiceApp pid = 1883 
 +UITimer_Init()... 
 +1970-01-01 00:01:39 voiceApp<1883>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 12 bind server socket 10 on /var/lib/.sock/zcfg_sockaddr12 successfully 
 + 
 +### ZyIMS VoIP TR-104 Config Data Init Procedure Start ### 
 + 
 +UITimerProc(): The UI Timer System (thread task: 'vo-USR-UItimer', pid=1883) is running... 
 +1970-01-01 00:01:40 zupnp<1638>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 17 bind server socket 14 on /var/lib/.sock/zcfg_sockaddr17 successfully 
 +main(): getpid = 1881 
 + 
 +[ENTERED]:ICF_ES 
 + 
 +INFO: AUTO_SCALE: 1  
 + 
 +INFO: MODE_OF_OPERATION: 0  
 + 
 +INFO: SIP_COMPACT_HDRS: NO  
 + 
 +INFO: NW_TRACE_ENABLED: YES  
 +INFO: ICF_DEF_SIP_SERVER_PORT: 6062  
 +INFO: ICF_DEF_SIP_PROXY_PORT: 6061  
 +INFO: TRANSPORT_MODE: 0  
 +INFO: ICF_SYS_RESOURCE_LIMIT: 1  
 + 
 +[ENTERING]:icf_es_init 
 +[ICF_ES]:PORT initalized succesfully 
 +icf_port_open_ipc_channel path = /var/iptk_es.chanl 
 + 
 +the open channel succeded  
 +exit from the es init  
 +icf_register_signal(): icf.exe pid = 1881 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:42 voiceApp<1883>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 12, select() wait forever, EID = 1, type = 1 with reply, oid = 468 
 +1970-01-01 00:01:42 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 61608 
 +1970-01-01 00:01:42 zcmd<459>, zcfg_msg.c:242, _msg_recv(), WARNING: EID = 1, select() wait for 2000 milli-seconds, EID = 12, type = 2004 with reply, oid = 0 
 +1970-01-01 00:01:42 zcmd<459>, zcfg_msg.c:844, zcfg_msg_sendAndGetReply(), ERROR: fail to receive message. ret = -1 
 +<<Error>> beVoiceCapConfigStatsUpdate() beVoiceSendMsgToZyIMSAndGetReply failed -5 use default list 
 +1970-01-01 00:01:42 zcmd<459>, zcmd.c:6410, main(), WARNING: process msg type = 1 with reply, oid = 468, from EID = 12 by 2031 ms 
 +hotplug:beUsbPortSet: USB Port Alias is cpe- 
 +hotplug:beUsbPortSet: USB Port Type is Device 
 +1970-01-01 00:01:42 esmd<524>, esmd.c:1565, processRequest(), WARNING: process msg type = 235 without reply, oid = 0, from EID = 1 by 24824 ms 
 +zcmd.c line 5582, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FIN 
 +ECONET/zcmd_wrapper.c line 2046, zcmdEnableConfigSave() : enable tr98mapTableSaveFlag and configSaveFlag 
 +tr104ConvertPortsType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialingType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertReceiveToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDPayloadType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +tr104ConvertPortsType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialingType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertReceiveToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDPayloadType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +tr104ConvertRegType(): <<Error>> INVALID parameter value : '' !! 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +mapd_interface_ctrl_open failed 
 +Can't connect to /tmp/mapd_ctrl 
 +json_object_from_file: error opening file /tmp/dump.txt: No such file or directory 
 +[initALTable] second chance - dump information is not ready.  
 +Update 1905 information Error!! 
 +tr104ConvertCWStatus(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertRegType(): <<Error>> INVALID parameter value : '' !! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +tr104ConvertCWStatus(): <<Error>> INVALID parameter value : '' !! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 + 
 +### ZyIMS VoIP TR-104 Config Data Init Procedure Successfully Finished ### 
 + 
 +MM:voiceDspCoreInit(): Entering... 
 +[MM]dspDriverInit(): Start to initialize the DSP (& Phone Port) driver by calling 'PhoneInit(countryCode=24)'... 
 +PhoneInit(): region: 'NLD'
 +Country Name:NLD 
 +result:9475208 
 +result:-9475208 
 +VDSP_GetInstance:278 
 +MM:voiceDspCoreInit(): after calling 'dsp_driver_itf.c/dspDriverGetInitData(initData@0x0, initDataLength=0)' to get the inited data of the MM part 'Endpoint_itf_mm.c/cmPhysEndpt[MAX_ENDPT]'... 
 +MM:voiceDspCoreInit(): after calling 'voiceEventIpcSendToVoiceApp()' to send the response message 'VOICE_DSP_INIT_RSP' back to [voiceApp]... 
 +MM:voiceDspCoreInit(): Exiting...with ret=1 & ret2=1 (MM_SUCCESS(1), MM_FAILURE(0)) 
 +[Adam] Change log level to (EVA_LOG_ERR). 
 +[GDI] Change log level to (EVA_LOG_ERR). 
 +fxsPhoneIOP_hookFlashDetecTimerSet(): <<Error>>Invalid input timer value {flashTimerMin=0, flashTimerMax=0} for the FXS phone port index-0!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0! 
 +fxsPhoneIOP_hookFlashDetecTimerSet(): <<Error>>Invalid input timer value {flashTimerMin=0, flashTimerMax=0} for the FXS phone port index-1!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0! 
 +voiceDspInit(): <<Error>> The Phone (DSP Init) Data: LocationPtr=0x00000000, Size=-1!! 
 +DSP state is Inactive , so exit PhoneInitEventCb now 
 +DSP activated success 
 +taskCreate()... 
 +voiceDspInit(): Leaving with return 0... 
 + phonePortVMWISet enters (for 'FXS' phone, phid=8 (8:All 'Ports' of the type), vmwiSigType=2 (1:SigOn,2:SigOff,0:SigNone))... 
 +in PhoneEventCb , the event 18 is not support !  
 +in PhoneEventCb , the event 18 is not support !  
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +taskCreate()... 
 +flushVoipRoutePolicy(): cmd = iptables -t mangle -F IP_ROUTE2_VOIP 
 + 
 +### ZyIMS VoIP Start-up Procedure Finished ### 
 + 
 +zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'MEX' is NOT supported, Skip it!! 
 +zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'CYP' is NOT supported, Skip it!! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:49 voiceApp<1883>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendto /var/lib/.sock/zcfg_sockaddr1-1573323, errno = 2(No such file or directory), srcEid = 12, dstEid = 1, type = 103 without reply, oid = 0 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +get_iface_ipv4_address(): <<Error>> ioctl socket 'SIOCGIFADDR' fail for ifName() ==> try to get IP address info by searching the 'iface_ipv4_address_list[]' array database alternatively!! 
 +get_iface_ipv4_address(): <<Error>> Can't find any matched ifName() even in the 'iface_ipv4_address_list[]' array database!! 
 +mmCfgSelfIp()/SipAcctId=0: <<Error>> calling 'get_iface_ipv4_address()' to get the IP Address FAIL for the interface pProf->ZyXEL_ActiveBoundIfName='' (where pProf->name='ChangeMe', ZyXEL_BoundIfName='Multi_WAN', ZyXEL_BoundIfList='IP.Interface.4,IP.Interface.7,IP.Interface.10', ZyXEL_BoundIpAddr='') ==> return FALSE now!! 
 +mmCfgOfRtpInfo()/SipAcctId=0: <<Error>> MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!! 
 +mmIptkCfgOfSipAccount(PID = 1883): <<Error>> 'mmCfgOfRtpInfo(sipAccountId=0)' FAIL ===> try to continue processing the next SIP Account!! 
 +get_iface_ipv4_address(): <<Error>> ioctl socket 'SIOCGIFADDR' fail for ifName() ==> try to get IP address info by searching the 'iface_ipv4_address_list[]' array database alternatively!! 
 +get_iface_ipv4_address(): <<Error>> Can't find any matched ifName() even in the 'iface_ipv4_address_list[]' array database!! 
 +mmCfgSelfIp()/SipAcctId=1: <<Error>> calling 'get_iface_ipv4_address()' to get the IP Address FAIL for the interface pProf->ZyXEL_ActiveBoundIfName='' (where pProf->name='ChangeMe', ZyXEL_BoundIfName='Multi_WAN', ZyXEL_BoundIfList='IP.Interface.4,IP.Interface.7,IP.Interface.10', ZyXEL_BoundIpAddr='') ==> return FALSE now!! 
 +mmCfgOfRtpInfo()/SipAcctId=1: <<Error>> MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!! 
 +mmIptkCfgOfSipAccount(PID = 1883): <<Error>> 'mmCfgOfRtpInfo(sipAccountId=1)' FAIL ===> try to continue processing the next SIP Account!! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +rm: can't remove '/tmp/app_sock': No such file or directory 
 +aging_en: 1, aging time: 5 
 +aging_unit: 0, aging_cnt: 4 
 +write reg: a0, value: 4000 
 +get_if_info for br0 
 +interface index is 19 
 +get_if_info OK 
 +Clean up temporary socket 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +bind_arp: ifindex=19 
 +Binding to ifindex 19 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +bind_arp: ifindex=16 
 +Binding to ifindex 16 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +MAC: 0x7fa8dc2c, len = 6 
 +0x0000 : 08 26 97 da dd 81  
 +bind_arp: ifindex=20 
 +Binding to ifindex 20 
 +done 
 +bind_arp: ifindex=21 
 +Binding to ifindex 21 
 +bind_arp: ifindex=22 
 +Binding to ifindex 22 
 +bind_arp: ifindex=17 
 +Binding to ifindex 17 
 +rai0      bbp:2308=303 
 +/bin/sh: can't create /proc/tc3162/lan_to_wifi_rps: nonexistent directory 
 +bind_arp: ifindex=28 
 +Binding to ifindex 28 
 +bind_arp: ifindex=29 
 +Binding to ifindex 29 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +bind_arp: ifindex=30 
 +Binding to ifindex 30 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 +device rai0 is already a member of a bridge; can't enslave it to bridge br0. 
 +killall: p1905_managerd: no process killed 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 +device rai1 is already a member of a bridge; can't enslave it to bridge br0. 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 +device rai3 is already a member of a bridge; can't enslave it to bridge br0. 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 +[WAPP]map_send_wirelss_inf_info 
 +send info ra0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:81 
 +send info ra1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:81 
 +send info ra2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:81 
 +send info ra3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:81 
 +send info rai0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:82 
 +send info rai1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:82 
 +send info rai2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:82 
 +send info rai3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:82 
 +  inf_count = 8  
 + 0 name ra0 ch 2, phymode [N] role [wiap] 
 + 1 name ra1 ch 2, phymode [N] role [wiap] 
 + 2 name ra2 ch 2, phymode [N] role [wiap] 
 + 3 name ra3 ch 2, phymode [N] role [wiap] 
 + 4 name rai0 ch 52, phymode [AC] role [wiap] 
 + 5 name rai1 ch 52, phymode [AC] role [wiap] 
 + 6 name rai2 ch 52, phymode [AC] role [wiap] 
 + 7 name rai3 ch 52, phymode [AC] role [wiap] 
 +route: SIOCADDRT: File exists 
 +killall: mapd: no process killed 
 +daemon mapd attached \x00/tmp/wapp_ctrl 
 +ctrler_found  
 +[WAPP]map_send_wirelss_inf_info 
 +send info ra0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:81 
 +send info ra1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:81 
 +send info ra2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:81 
 +send info ra3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:81 
 +send info rai0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:82 
 +send info rai1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:82 
 +send info rai2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:82 
 +send info rai3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:82 
 +Profile Count to host = 0 
 +rm: can't remove '/tmp/app_sock': No such file or directory 
 +bridge name br0 
 +database_init : /data/netprb_db_ver 
 +database_init : database_ver 18 
 +database_init : Create Device table 
 +database_init : Create Sub Interface table 
 +database_init : Create L2 Device Functions table 
 +arp_init     : arp_event->event_id 1 
 +layer2_init  : layer2_event->event_id 2 
 +oui_init     : oui_event->event_id 3 
 +ethlink_init : ethlink_event->event_id 4 
 +zy1905_init  : zy1905_event->event_id 5 
 +agentDataRecv: Start to receiving... 
 +0 ssid=TMNL-DADD81, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +1 ssid=TMNL-DADD81_guest1, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +2 ssid=TMNL-DADD81_guest2, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +3 ssid=TMNL-DADD81_guest3, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +1-iwpriv ra0 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra0 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv ra1 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra1 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv ra2 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra2 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv ra3 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra3 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +0 ssid=TMNL-DADD81, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +1 ssid=TMNL-DADD81_guest1, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +2 ssid=TMNL-DADD81_guest2_5G, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +3 ssid=29a022df555f3c37f84a367e153831c, autmode=0x0020, encryptype=0x0008, key=d46025d0ff175f7d55ae756de8952d5a bh_bss=1, fh_bss=0 
 +send BH config to ra0 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to ra1 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to ra2 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to ra3 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai0 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai1 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai2 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai3 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +1-iwpriv rai0 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai0 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv rai1 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai1 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv rai2 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai2 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv rai3 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai3 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2023/05/23 23:28
  • by rupurudu1