Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:zyxel:zyxel_vmg8825-t50 [2020/09/11 09:57] – Created from the form at meta:create_new_device_page smokeythebanditinbox:toh:zyxel:zyxel_vmg8825-t50 [2020/09/12 11:45] – [Hardware highlights] CPU added tmomas
Line 4: Line 4:
 /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} +The ZyXEL VMG8825-T50 is cheap but modern modem/router that is provided by ISP's. It supports ADSLand has an ethernet WAN port.  
- +The device has built in Wifi 2.4/5Ghz with support up to Wifi ACIt has 4 ethernet port for the LAN network, one USB 2.0 port and one usb 3.0 port. 
-//Write shortrelevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about rightA picture is goodtooEdit the page to see how to add pictures.//+The firmware on it is fairly restrictivebut not as bad as some other modemsAppears to run some pretty old software.
  
 /*****/ /*****/
Line 12: Line 12:
 /*****/ /*****/
  
-{{ media:example:genericrouter1.png?200|Generic Router}}+{{ media:zyxel:VMG8825-T50.jpg?200|VMG8825-T50}}
  
  
Line 43: Line 43:
 ===== Hardware highlights ===== ===== Hardware highlights =====
 ^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^ ^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^
-EXAMPLE RT3052 384 MHz   |  64 MiB  |  8 MiB   4x 10/100  |  bgn    1x 2.0  |   Yes    |      |+Econet EN7516 900 MHz   |  512 MiB  |  2Gb  |  1+4x 10/100/1000   bgn/ac   |  1x 2.0, 1x 3.0  |   Yes    |   no    |
  
  
Line 111: Line 111:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-^ Architecture     EXAMPLE MIPS                             +^ Architecture     | MIPS                                     
-^ Vendor           EXAMPLE Ralink                           +^ Vendor           [[https://www.mediatek.com/|MediaTek]]/EcoNet                          
-^ Bootloader       EXAMPLE U-Boot                           +^ Bootloader       ZyXEL zloader v1.4.4                     
-^ System-On-Chip   EXAMPLE Ralink RT3052 MIPS 24K V4.12   | +^ System-On-Chip   [[http://www.econet-inc.com/product/view?product_category_id=2&product_id=62|EcoNet EN7516]] - MIPS32® 1004K™ V4.12   | 
-^ CPU/Speed        | EXAMPLE 451 MHz                          +^ CPU/Speed        | Dual core 2x900 MHz                                  
-^ Flash-Chip       EXAMPLE unkown                           +^ Flash-Chip       [[https://www.winbond.com/hq/product/code-storage-flash-memory/qspinand-flash/index.html?__locale=en&partNo=W25M02GV|Winbond W25M02GV]] 
-^ Flash size       EXAMPLE 8 MiB                            +^ Flash size       2Gb                                      |  
-^ RAM              | EXAMPLE 64 MiB                           +^ RAM              | 512MB                                    
-^ Wireless         EXAMPLE RT2860v2 2.4GHz 802.11bgn        +^ Wireless         [[https://www.mediatek.com/products/broadbandWifi/mt7615|MT7615]] Wi-Fi 5 (b/g/n/ac) 
-^ Ethernet         EXAMPLE 10/100 Mbit/s w/ vlan support    | +^ Ethernet         1x WAN, 4x LAN (10/100/1000Mbit/s w/ vlan support   | 
-^ Switch           EXAMPLE Qualcomm Atheros QCA8337         +^ Switch           Built in to SoC                          
-^ USB              | EXAMPLE 1x 2.0                           | +^ USB              | 1x 2.0, 1x 3.0                           | 
-^ Serial           EXAMPLE [[#Serial|Yes]]                  +^ Serial           | [[#Serial|Yes]]                          
-^ JTAG             EXAMPLE [[#JTAG|Not populated]]          |+^ JTAG             No                                       |
  
  
Line 138: Line 138:
  
 ==== Photos ==== ==== Photos ====
-/* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ +{{media:zyxel:vmg8825-t50-front.jpg?400|}}
-/* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ +
-/* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}}                                  */ +
-/* Thanks, your wiki administration - Oct. 2015 */+
  
-**Insert photo of front of the casing**+{{media:zyxel:vmg8825-t50-back.jpg?400|}}
  
-**Insert photo of back of the casing** +{{media:zyxel:vmg8825-t50-pcb.jpg?400|}}
- +
-**Insert photo of backside label** +
- +
-**Insert photo of PCB**+
  
 ==== Opening the case ==== ==== Opening the case ====
  
-<WRAP BOX> +You only need to remove to Philips screws at the back of the unit. 
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feetadhesive labels, screws, ...// +After that, you will be able to separate the back and front plastic pieces of the device. 
-</WRAP>+The parts are still hold together with clipsif you insert a small plastic part in the gap between the two pieces you should be able to pry it open fairly easily.
  
 ==== Serial ==== ==== Serial ====
--> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. 
  
-How to connect to the Serial Port of this specific device:\\ +I've used this USB to serial adapter to connect to the device: 
-**Insert photo of PCB with markings for serial port**+https://www.kiwi-electronics.nl/usb-to-ttl-serial-kabel?lang=en
  
-<WRAP BOX> +{{media:zyxel:vmg8825-t50_serial.jpg?200|Shows what pins to connect to for serial console}} 
-FIXME //Replace EXAMPLE by real values.// +{{media:zyxel:vmg8825-t50_serial_closeup.jpg?400|Shows what pins to connect to for serial console}}
-</WRAP>+
  
-^ Serial connection parameters\\ for ZyXEL VMG8825-T50 @@Version@@ | EXAMPLE 115200, 8N1 | 
  
-==== JTAG ==== +^ Serial connection parameters\\ for ZyXEL VMG8825-T50  | 1152008N1 |
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG portJTAG cable, etc.+
  
-How to connect to the JTAG Port of this specific device:\\ 
-**Insert photo of PCB with markings for JTAG port** 
  
 ===== Bootlogs ===== ===== Bootlogs =====
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +BGA IC 
 +Xtal:1 
 +DDR3 init. 
 +DRAMC init done.  
 +Calculate size. 
 +DRAM size=512MB 
 +Set new TRFC. 
 +ddr-1333 
 + 
 + 
 +7516DRAMC V1.0 (0) 
 + 
 +Press 'x' or 'b' key in 1 secs to enter or skip bootloader upgrade. 
 + 
 + 
 +EN751627 at Fri May 15 15:20:05 CST 2020 version 1.1 free bootbase 
 + 
 +Set SPI Clock to 50 Mhz 
 +spi_nand_probe: mfr_id=0xef, dev_id=0xab 
 +Using Flash ECC. 
 +Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25M02G, Flash Size=0x10000000 
 +bmt pool size: 163  
 +BMT & BBT Init Success  
 + 
 + 
 + 
 +ZyXEL zloader v1.4.4 (05/15/2020 - 15:20:04) 
 +Multiboot client version: 2.4 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +Not found TC Phy 
 + 
 +  GE Rext AnaCal Done! (4)(0x1c)   
 + 
 + 
 +Hit any key to stop autoboot: 
 + 
 + main tclinux.bin have ZYXEL trx header! 
 + 
 + 
 + main tclinux.bin Start to decrypt RSA! 
 + 
 + 
 +==> boot flag = 0 
 +from main 
 +Decompress to 80002000 free_mem_ptr=80950000 free_mem_ptr_end=807B0000 
 +Uncompressing [LZMA] ...  done. 
 +Initializing cgroup subsys cpuset 
 +Initializing cgroup subsys cpu 
 +Initializing cgroup subsys cpuacct 
 +Linux version 3.18.21 (howard@TWPCZT02587-03) (gcc version 4.6.3 (OpenWrt GCC 4.6.3 unknown) ) #2 SMP Fri May 15 16:39:01 CST 2020 
 +memsize:432MB 
 +EcoNet EN751627 SOC prom init 
 +bootconsole [early0] enabled 
 +CPU0 revision is: 0001992f (MIPS 1004Kc) 
 +Determined physical RAM map: 
 + memory: 1affe000 @ 00002000 (usable) 
 +Wasting 64 bytes for tracking 2 unused pages 
 +Zone ranges: 
 +  Normal   [mem 0x00002000-0x1affffff] 
 +Movable zone start for each node 
 +Early memory node ranges 
 +  node   0: [mem 0x00002000-0x1affffff] 
 +Initmem setup node 0 [mem 0x00002000-0x1affffff] 
 +Detected 3 available secondary CPU(s) 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +PERCPU: Embedded 9 pages/cpu @81364000 s6272 r8192 d22400 u36864 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 109726 
 +Kernel command line:  
 +log_buf_len individual max cpu contribution: 4096 bytes 
 +log_buf_len total cpu_extra contributions: 12288 bytes 
 +log_buf_len min size: 16384 bytes 
 +log_buf_len: 32768 bytes 
 +early log buf free: 14280(87%) 
 +PID hash table entries: 2048 (order: 1, 8192 bytes) 
 +Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) 
 +Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +Writing ErrCtl register=0007c95f 
 +Readback ErrCtl register=0007c95f 
 +nmi base is 813fc200 
 +Memory: 431420K/442360K available (4925K kernel code, 216K rwdata, 936K rodata, 240K init, 541K bss, 10940K reserved) 
 +SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +Hierarchical RCU implementation. 
 +NR_IRQS:64 
 + 
 + 
 +tc3162_time_init: Init bus timeout and watchdog 
 + 
 +CPU frequency 900.00 MHz 
 +plat_time_init: Entered, mips_timer_ack ptr is [80007378] 
 + 
 + Using 200.000 MHz high precision timer. 
 +r4k_clockevent_init: setup_irq OK, irq is [52] 
 + 
 +console [ttyS0] enabled 
 +console [ttyS0] enabled 
 +bootconsole [early0] disabled 
 +bootconsole [early0] disabled 
 +Calibrating delay loop... 589.00 BogoMIPS (lpj=2945024) 
 +pid_max: default: 32768 minimum: 301 
 +Security Framework initialized 
 +Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +Initializing cgroup subsys devices 
 +Initializing cgroup subsys freezer 
 +Initializing cgroup subsys net_cls 
 +Initializing cgroup subsys blkio 
 +Initializing cgroup subsys debug 
 +34K sync es set to 0. 
 +Config7: 0x80090500 
 +launch: starting cpu1 
 +launch: cpu1 gone! 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +CPU1 revision is: 0001992f (MIPS 1004Kc) 
 +Synchronize counters for CPU 1: done. 
 +launch: starting cpu2 
 +launch: cpu2 gone! 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +CPU2 revision is: 0001992f (MIPS 1004Kc) 
 +Synchronize counters for CPU 2: done. 
 +launch: starting cpu3 
 +launch: cpu3 gone! 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +CPU3 revision is: 0001992f (MIPS 1004Kc) 
 +Synchronize counters for CPU 3: done. 
 +Brought up 4 CPUs 
 +devtmpfs: initialized 
 +NET: Registered protocol family 16 
 +PCIe 7516 PHY init   
 +PCIe driver version: 751627.1.20170815 
 +EN751627 pcie_init 
 +check pcie link up status:  
 +isRC0_LINKUP=1  
 +isRC1_LINKUP=1  
 +registering PCI controller with io_map_base unset 
 +Initializing Ecnt Event Netlink Socket 
 + 
 +Initializing Econet Event Netlink Socket nl_sk = 9ad58800 
 + 
 +usbcore: registered new interface driver usbfs 
 +usbcore: registered new interface driver hub 
 +usbcore: registered new device driver usb 
 +PCI host bridge to bus 0000:00 
 +pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] 
 +pci_bus 0000:00: root bus resource [io  0x1f600000-0x1f61ffff] 
 +pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] 
 +pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff] 
 +pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] 
 +pci 0000:00:00.0: PCI bridge to [bus 01] 
 +pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff] 
 +pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit] 
 +pci 0000:00:01.0: PCI bridge to [bus 02] 
 +pci 0000:00:01.0:   bridge window [mem 0x20100000-0x201fffff] 
 +NET: Registered protocol family 8 
 +NET: Registered protocol family 20 
 +Switched to clocksource MIPS 
 +NET: Registered protocol family 2 
 +TCP established hash table entries: 4096 (order: 2, 16384 bytes) 
 +TCP bind hash table entries: 4096 (order: 3, 32768 bytes) 
 +TCP: Hash tables configured (established 4096 bind 4096) 
 +TCP: reno registered 
 +UDP hash table entries: 256 (order: 1, 8192 bytes) 
 +UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) 
 +NET: Registered protocol family 1 
 + 
 + mt7512_pcie_fixup: 0x1438 = 20000014  
 + mt7512_pcie_rc0_retrain: 80 = 01408c12 80 = 01608c12 
 +RC0 Link Traing Result: 10120008 
 + mt7512_pcie_fixup: 0x3438 = 20100014  
 + mt7512_pcie_rc1_retrain: 80 = 01408c12 80 = 01608c12 
 +RC1 Link Traing Result: 10120008 
 +TC3162 hardware watchdog module loaded. 
 +USB overcurrent protection. 
 +futex hash table entries: 1024 (order: 4, 65536 bytes) 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +ntfs: driver 2.1.31 [Flags: R/W DEBUG]. 
 +msgmni has been set to 842 
 +io scheduler noop registered (default) 
 +ttyS0 at I/O 0xbfbf0003 (irq = 5, base_baud = 7200) is a TC3162 
 +ECNT ring buffer init success 
 +Init UART2 and UART3, still need to trun on for using. 
 +ttyS20 at I/O 0xbfbf0300 (irq = 4, base_baud = 7200) is a TC3162 
 +ttyS30 at I/O 0xbfbe1000 (irq = 3, base_baud = 7200) is a TC3162 
 +brd: module loaded 
 + 
 +SPI Flash Init Start 
 +Found no SPI flash device 
 +IS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6) 
 +Set SPI Clock to 50 Mhz 
 +spi_nand_probe: mfr_id=0xef, dev_id=0xab 
 +Using Flash ECC. 
 +Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25M02G, Flash Size=0x10000000 
 +spi nand flash 
 +tc3162: flash device 0x01000000 at 0x1c000000 
 +EN7512 mtd init: spi nand probe enter 
 +[spi_nand_setup] : Enter  
 +nand: device found, Manufacturer ID: 0xef, Chip ID: 0xab 
 +nand: Unknown _SPI_NAND_DEVICE_ID_W25M02G 
 +nand: 256MiB, SLC, page size: 2048, OOB size: 64 
 +nand_scan_ident ok 
 +[spi_nand_setup]: chip size =  0x10000000, erase_shift=0x11 
 +bmt pool size: 163  
 +BMT & BBT Init Success  
 + 
 +parsing <0[bootloader],0[romfile],56M[tclinux],-[tclinux_slave],1M[wwan],4M[data],1M[rom-d],118M[misc]> 
 +partition 11: name <misc>, offset ffffffff, size 7600000, mask flags 0 
 +partition 10: name <rom-d>, offset ffffffff, size 100000, mask flags 0 
 +partition 9: name <data>, offset ffffffff, size 400000, mask flags 0 
 +partition 8: name <wwan>, offset ffffffff, size 100000, mask flags 0 
 +partition 7: name <tclinux_slave>, offset ffffffff, size ffffffff, mask flags 0 
 +partition 4: name <tclinux>, offset ffffffff, size 3800000, mask flags 0 
 +partition 1: name <romfile>, offset ffffffff, size fffffffe, mask flags 0 
 +partition 0: name <bootloader>, offset ffffffff, size fffffffe, mask flags 0 
 +Creating 13 MTD partitions on "EN7512-SPI_NAND": 
 +0x000000000000-0x000000040000 : "bootloader" 
 +0x000000040000-0x000000080000 : "romfile" 
 +0x000000080000-0x00000028ccdd : "kernel" 
 +mtd: partition "kernel" doesn't end on an erase block -- force read-only 
 +0x00000028ccdd-0x0000016ccce1 : "rootfs" 
 +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 
 +0x000000080000-0x000003880000 : "tclinux" 
 +0x000003880000-0x000003a8cc01 : "kernel_slave" 
 +mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only 
 +0x000003a8cc01-0x000004e0cc05 : "rootfs_slave" 
 +mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only 
 +0x000003880000-0x000006ee0000 : "tclinux_slave" 
 +0x000006ee0000-0x000006fe0000 : "wwan" 
 +0x000006fe0000-0x0000073e0000 : "data" 
 +0x0000073e0000-0x0000074e0000 : "rom-d" 
 +0x0000074e0000-0x00000eae0000 : "misc" 
 +0x00000eae0000-0x00000eba0000 : "reservearea" 
 + 
 + 
 +rootfs 
 +PPP generic driver version 2.4.2 
 +PPP BSD Compression module registered 
 +PPP Deflate Compression module registered 
 +NET: Registered protocol family 24 
 +usbcore: registered new interface driver cdc_acm 
 +cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
 +usbcore: registered new interface driver usbserial 
 +usbcore: registered new interface driver usbserial_generic 
 +usbserial: USB Serial support registered for generic 
 +usbcore: registered new interface driver cypress_m8 
 +usbserial: USB Serial support registered for DeLorme Earthmate USB 
 +usbserial: USB Serial support registered for HID->COM RS232 Adapter 
 +usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter 
 +usbcore: registered new interface driver ftdi_sio 
 +usbserial: USB Serial support registered for FTDI USB Serial Device 
 +hidraw: raw HID events driver (C) Jiri Kosina 
 +usbcore: registered new interface driver usbhid 
 +usbhid: USB HID core driver 
 +GACT probability NOT on 
 +u32 classifier 
 +    Actions configured 
 +Netfilter messages via NETLINK v0.30. 
 +nf_conntrack version 0.5.0 (6740 buckets, 26960 max) 
 +ctnetlink v0.93: registering with nfnetlink. 
 +nf_conntrack_rtsp v0.7 loading 
 +nf_nat_rtsp v0.7 loading 
 +nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net> 
 +nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org> 
 +xt_time: kernel timezone is -0000 
 +ip_tables: (C) 2000-2006 Netfilter Core Team 
 +ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully 
 +TCP: cubic registered 
 +Initializing XFRM netlink socket 
 +NET: Registered protocol family 10 
 +sit: IPv6 over IPv4 tunneling driver 
 +NET: Registered protocol family 17 
 +NET: Registered protocol family 15 
 +bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
 +8021q: 802.1Q VLAN Support v1.8 
 +tc3162ser_startup  
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:3. 
 +Freeing unused kernel memory: 240K (805f4000 - 80630000) 
 +mknod: /dev/ppp: File exists 
 +mknod: /dev/ptmx: File exists 
 +mknod: /dev/ptyp0: File exists 
 +mknod: /dev/ptyp1: File exists 
 +mknod: /dev/ptyp2: File exists 
 +mknod: /dev/ttyp0: File exists 
 +mknod: /dev/ttyp1: File exists 
 +mknod: /dev/ttyp2: File exists 
 +mknod: /dev/watchdog: File exists 
 +mknod: /dev/ttyS20: File exists 
 +mknod: /dev/ttyS30: File exists 
 +mknod: /dev/hwnat0: File exists 
 +mknod: /dev/acl0: File exists 
 +mknod: /dev/ac0: File exists 
 +mknod: /dev/mtr0: File exists 
 +**************prepare var***************** 
 +busybox init and set aff 
 + 
 +init started: BusyBox v1.20.1 (2020-05-15 14:51:49 CST) 
 +chmod: /userfs/profile.cfg: Read-only file system 
 +TCSUPPORT_IPV6 
 +/dev created at preinit 
 +Reading MT7615 2.4G EEPROM from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=1024 tcoffset=0 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/RT30xxEEPROM.bin ...  
 +Reading MT7615 5G EEPROM from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=1024 tcoffset=131072 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/Wireless/RT2860AP_AC/RT30xxEEPROM.bin ...  
 +Reading MT7615 2.4G CALDATA from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=36864 tcoffset=4096 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/CALDATA_default.bin ...  
 +Reading MT7615 5G CALDATA from flash reservearea 
 +mtd[readflash]:device=reservearea tclen=36864 tcoffset=135168 
 +Unlocking reservearea ... 
 +Reading from reservearea to /etc/Wireless/RT2860AP_AC/CALDATA_default.bin ...  
 +insmod ETH_LAN driver 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +Exec. Successful 
 +install dmt for mt7510 
 +TCSUPPORT_WLAN 
 +TCSUPPORT_WLAN_MT7615 
 +TCSUPPORT_MAP_FILTER 
 +ifconfig: SIOCGIFFLAGS: No such device 
 +**************lan port init***************** 
 +four ports 
 +device eth0 is not a slave of br0 
 +taskset: invalid number '0x8' 
 +date: invalid date '010100002012' 
 +/etc/init.d/rcS: line 1457: /userfs/bin/wpa_supplicant: not found 
 +CO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1 
 +MTK DSP support 
 +voip_loader start 
 +START CHECK ZARLIN ZSI 
 +[SLIC] le9642 
 +Loading le9642,slic num:1 
 +Loading common 
 +init mod-ksocket 
 +init mod-acodec 
 +init mod-foip3 
 +voip loader end 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +taskset: invalid number '0x8' 
 +wan ether support 
 +TCSUPPORT_WLAN_SW_RPS 
 +VDSP_GetInstance:278 
 +/proc/net/skbmgr_4k_limit ??? 
 +Jan  1 00:00:28 crond[433]: crond: crond (busybox 1.20.1) started, log level 8 
 + 
 +START disable Lan and Wan... 
 +ln: /dev/log: File exists 
 +1970-01-01 00:00:29 dnsmasq<454>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr23 successfully 
 + 
 +dnsmasq: unknown user or group: root 
 +1970-01-01 00:00:29 zcmd<459>, zcmd.c:6172, main(), INFO: Start ZCMD daemon 
 +1970-01-01 00:00:29 zcmd<460>, uitimer.c:95, UITimerProc(), INFO: thread starts 
 +killall: zywifid_run.sh: no process killed 
 +zcfg_schema.bin 
 +killall: zywifid: no process killed 
 +1970-01-01 00:00:30 zywifid<474>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 40 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr40 successfully 
 +*reg=0000001c value:68106810 
 + 
 +Load NComm TMS Module. 
 +zywifid> [ALERT] wifi_module_init:1082: load libzywl_001_ecn.so .......... 
 +Find MTD Device /dev/mtd1 with name romfile. 
 +mtd.oobsize 64 mtd.writesize 2048 
 +romfile type ffff 
 +romfile size 4294967295 
 +romfile crc 65535 
 +zywifid> [ALERT] main:1211: Check and fix Wifi MAC address...... 
 + 
 +Please press Enter to activate this console. rm: can't remove '/tmp/wifiScanTime*': No such file or directory 
 +MAX Number of Interface Stack is 254 
 +Enter zcmdTr98MapTableInit 
 +zcmdTr98ParmAttrNodeBuild: 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 3,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=1 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 4,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=2 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 5,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=3 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 6,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=4 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 7,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=5 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 8,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=6 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 9,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=7 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 10,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=8 
 +zcmdTr98ParmAttrNodeBuild: obj 67176 11,1,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=9 
 +zcmdTr98ParmAttrNodeBuild: obj 64788 1,0,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=10 
 +zcmdTr98ParmAttrNodeBuild: obj 14568 0,0,0,0,0, nSetParmAttr 2 
 +setParmAttrNodeLst Add, n=11 
 +zcmdTr98ParmAttrNodeBuild: obj 16920 0,0,0,0,0, nSetParmAttr 1 
 +setParmAttrNodeLst Add, n=12 
 +zcmdTr98ParmAttrNodeBuild: obj 112704 0,0,0,0,0, nSetParmAttr 2 
 +setParmAttrNodeLst Add, n=13 
 +zcmdTr98ParmAttrNodeBuild: obj 87144 1,0,0,0,0, nSetParmAttr 3 
 +setParmAttrNodeLst Add, n=14 
 +mainDhcpPoolInfo[0]= 1 [1 0] 
 +mainDhcpPoolInfo[1]= 0 [0 0] 
 +mainDhcpPoolInfo[2]= 0 [0 0] 
 +mainDhcpPoolInfo[3]= 0 [0 0] 
 +mainDhcpPoolInfo[4]= 0 [0 0] 
 +mainDhcpPoolInfo[5]= 0 [0 0] 
 +mainDhcpPoolInfo[6]= 0 [0 0] 
 +mainDhcpPoolInfo[7]= 0 [0 0] 
 +mainDhcpPoolInfo[8]= 0 [0 0] 
 +mainDhcpPoolInfo[9]= 0 [0 0] 
 +mainDhcpPoolInfo[10]= 0 [0 0] 
 +mainDhcpPoolInfo[11]= 0 [0 0] 
 +mainDhcpPoolInfo[12]= 0 [0 0] 
 +mainDhcpPoolInfo[13]= 0 [0 0] 
 +mainDhcpPoolInfo[14]= 0 [0 0] 
 +mainDhcpPoolInfo[15]= 0 [0 0] 
 +zcmdTr98MapTableInit End 
 +1970-01-01 00:00:31 zcmd<459>, zcmd.c:6279, main(), INFO: tr98 map table inited 
 +zcmdReleaseTr98ObjParamMapping: no this object mapping 
 +zcmdReleaseTr98ObjParamMapping: object 86172 has mapping object 
 +zcmdReleaseTr98ObjParamMapping: object index attr 
 +zcmdReleaseTr98ObjParamMapping: object index 1 
 +zcmdReleaseTr98ObjParamMapping: Release object 86172 mapping with data 
 +zcmdTr98MappingGrpQry: obj 86172 1,0,0,0,0,0 queried group 0 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 86172, List obj 86172 
 +zcmdTr98MappingGrpQry: obj 87144 1,0,0,0,0,0 queried group 0 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87144, List obj 87144 
 +setParmAttrNodeLst Delete, n=13 
 +=====zcmdTr98MtObjDelete=====seqnum=181 
 +=====zcmdTr181MtObjDelete=====oid=87144 
 +=====zcmdTr98MtObjDelete=====seqnum=180 
 +=====zcmdTr181MtObjDelete=====oid=86172 
 +1970-01-01 00:00:31 zcmd<459>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 1 bind server socket 4 on /var/lib/.sock/zcfg_sockaddr1 successfully 
 +1970-01-01 00:00:31 zcmd<501>, zcmd_config_apply.c:1557, zcmdModuleConfigHandleTask(), INFO: thread starts 
 +1970-01-01 00:00:31 zcmd<501>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 69 bind server socket 5 on /var/lib/.sock/zcfg_sockaddr69 successfully 
 +1970-01-01 00:00:31 zcmd<500>, zcmd_config_apply.c:1639, zcmdConfigApplyTask(), INFO: thread starts 
 +1970-01-01 00:00:31 zcmd<500>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 67 bind server socket 6 on /var/lib/.sock/zcfg_sockaddr67 successfully 
 +/bin/sh: dsldiagd: not found 
 +1970-01-01 00:00:31 esmd<511>, esmd.c:2126, main(), INFO: ESMD Start 
 +ESMD msg server init... 
 +1970-01-01 00:00:31 esmd<511>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 2 bind server socket 0 on /var/lib/.sock/zcfg_sockaddr2 successfully 
 +[ESMD] Initial kernel monitor ... 
 +kernelFd=7 
 +1970-01-01 00:00:31 zcmd<519>, zcmd.c:5637, zcmdActiveZtr69(), INFO: thread starts 
 +Find MTD Device /dev/mtd8 with name wwan. 
 +mtd.oobsize 64 mtd.writesize 2048 
 +FW_WATCHER Start 
 +Notice: zyUtilUpdateWWANPackage, No WWAN Package in Flash! 
 +wwanpackage info: revision is 1.18 
 +1970-01-01 00:00:31 esmd<526>, esmd.c:1992, timer_thread(), INFO: thread starts 
 +zyUtilTcpSvrInit 
 +1970-01-01 00:00:31 esmd<525>, esmd.c:1611, _esmd_thread(), INFO: ESMD ground thread starts 
 +1970-01-01 00:00:31 esmd<525>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 66 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr66 successfully 
 +1970-01-01 00:00:31 esmd<524>, esmd.c:1603, _esmd_thread(), INFO: ESMD usr config thread starts 
 +zcmdBeInit(): DL opening... 
 +Initial begui_customization.... 
 +Initial bedevice.... 
 +Chain MACFILTER already exists. 
 +devObj->DeviceSummary = InternetGatewayDevice:1.4[](Baseline:1,EthernetLAN:2,WiFiLAN:1,ADSLWAN:1,ADSL2WAN:1,VDSL2WAN:1,PTMWAN:1,EthernetWAN:1,QoS:1,Time:1,IPPing:1),VoiceService:1[](Endpoint:1,SIPEndpoint:1,TAEndpoint:1) 
 +Initial bedsl.... 
 +sh: you need to specify whom to kill 
 +Initial beatmlink.... 
 +Initial beptmlink.... 
 +Jan  1 00:00:33 crond[637]: crond: crond (busybox 1.20.1) started, log level 8 
 + 
 +Initial belog.... 
 +killall: tty_log_echo: no process killed 
 +killall: mailsend: no process killed 
 +Set interval time = 60 second 
 +killall: syslog-ng: no process killed 
 +Error resolving user; user='root' 
 +Initial besysinfo.... 
 +Initial beaccount.... 
 +mkdir: can't create directory '/var/tmp': File exists 
 +chmod: /data/zcfg_predef.json: No such file or directory 
 +chmod: /data/zcfg_predef.json: No such file or directory 
 +Initial bedevinfo.... 
 +1970-01-01 00:00:35 zcmd<518>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendto /var/lib/.sock/zcfg_sockaddr9, errno = 2(No such file or directory), srcEid = 1, dstEid = 9, type = 273 without reply, oid = 0 
 +1970-01-01 00:00:35 zcmd<518>, zcfg_msg.c:822, zcfg_msg_sendAndGetReply(), ERROR: fail to send message. ret = -5 
 +Initial beethlink.... 
 +Initial beethintf.... 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +auto, Auto-negotiation enabled. 
 +No common media type was autonegotiated! 
 +This is extremely unusual and typically indicates a configuration error. 
 +Perhaps the advertised capability set was intentionally limited. 
 +Link is down 
 +Initial bewifi_radio.... 
 +Initial bewifi_ssid.... 
 +Initial bewifi_ap.... 
 +Initial bebridging.... 
 +Initial bebridgingbr.... 
 +Initial bebridgePort.... 
 +device ra0 is not a slave of br0 
 +interface ra1 does not exist! 
 +device rai0 is not a slave of br0 
 +interface rai1 does not exist! 
 +interface rai3 does not exist! 
 +Initial bebridgeFilter.... 
 +Initial bewifi.... 
 +Initial beipiface.... 
 +zywifid:Config> [ERROR] zyWifiUpdateLanInfo:404: No wifi interface on module(ECN). 
 +/bin/sh: zy1905App: not found 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204 
 +zcfgBeWanInitIntfMark : Enter 
 +zcfgBeWanInitIntfMark: Init IfMark Done !! 
 +Initial benatIntf.... 
 +modprobe: module nf_nat_ftp not found in modules.dep 
 +modprobe: module nf_conntrack_ftp not found in modules.dep 
 +modprobe: module nf_nat_ftp not found in modules.dep 
 +ftp switch turn on 
 + 
 +sip switch turn on 
 + 
 +modprobe: module nf_conntrack_rtsp not found in modules.dep 
 +rtsp switch turn on 
 + 
 +pptp switch turn on 
 + 
 +Initial bev4addr.... 
 +Initial bev6addr.... 
 +Initial bev6prefix.... 
 +Initial beusbhost.... 
 +Initial beusbintf.... 
 +Initial beusbport.... 
 +Initial berouter.... 
 +Initial berainfo.... 
 +Initial bedhcp4_server.... 
 +Initial bedhcp4_serverpool.... 
 +Initial bedhcp4_serverpool_staticaddr.... 
 +Initial bedhcp4_serverpool_option.... 
 +Initial bedhcp4_serversubnet.... 
 +restart DNSMASQ... 
 +killall: dnsmasq: no process killed 
 +1970-01-01 00:01:11 dnsmasq<1222>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr23 successfully 
 +Initial bedhcp4_relay.... 
 +Initial bedhcp6_server.... 
 +Initial bedhcp6_serverpool.... 
 +Initial bevlanTerm.... 
 +Initial bepppiface.... 
 +zcmdTr98SyncTr98WANConnectNum: obj 63672 seqnum 218 
 +Initial bepppifaceipcp.... 
 +Initial bedhcp4_client.... 
 +Initial bedhcp6_client.... 
 +1970-01-01 00:01:11 zcmd<518>, be_dhcp6_client_config_init.c:29, beConfigBoot(), INFO: boot Dhcp6 Client 
 +Initial beradvd.... 
 +Initial bedns.... 
 +Initial bedns_route.... 
 +Initial bedns_server.... 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708 
 +zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708 
 +Initial benat_port_map.... 
 +Initial benat_port_trigger.... 
 +Initial benat_addr_mapping.... 
 +Initial begre_tunnel.... 
 +modprobe ip_gre 
 +modprobe: module ip_gre not found in modules.dep 
 +Initial besessCtl.... 
 +/bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory 
 +/bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directory 
 +Initial befirewall.... 
 +getL1InterfaceUpstream: 561 USB.Interface.1 
 +getL1InterfaceUpstream: 561 USB.Interface.1 
 +Initial betr69.... 
 +Initial beddns.... 
 +Initial betime.... 
 +Initial bediagnostic.... 
 +killall: tmsctl: no process killed 
 +Initial beschedule.... 
 +Initial beparenCtl.... 
 +Initial beqos.... 
 +Initial beqosQueue.... 
 +Initial beqosClass.... 
 +Initial beqosShaper.... 
 +Initial beqosPolicer.... 
 +Initial be6rd.... 
 +Initial beigmp.... 
 +cp: can't stat '/etc/mcpd_igmp.conf': No such file or directory 
 +beigmp! 
 +/bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent directory 
 +restart DNSMASQ... 
 +[beIgmpCreateCfg](122) Failed. 
 +Initial besnmp.... 
 +Boot SNMP 
 +Initial bemld.... 
 +1970-01-01 00:01:13 dnsmasq<1314>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr23 successfully 
 +cp: can't stat '/etc/mcpd_mld.conf': No such file or directory 
 +cat: can't open '/var/run/ecmh.pid': No such file or directory 
 +sh: you need to specify whom to kill 
 +Initial bevcAutoHunt.... 
 +Initial bevlanAutoHunt.... 
 +Initial beupnp.... 
 +Initial bemacfilter.... 
 +Initial bemacfilter_whitelist.... 
 +Initial beuserinterface.... 
 +Initial beremoMgmt.... 
 +Initial bechangehosticon.... 
 +Initial behosts.... 
 +Initial behostshost.... 
 +Initial becert.... 
 +Initial beportmirror.... 
 +Initial bedslite.... 
 +Initial beSTBVendorID.... 
 +Initial berip.... 
 +killall: ripd: no process killed 
 +writing RSA key 
 +Initial betr64.... 
 +Initial bewwanbackup.... 
 +Initial besamba.... 
 +Initial http with port(443), SSL enable. 
 +Initial http with port(80), SSL disable. 
 +1970-01-01 00:01:15 zhttpd<1347>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 15 bind server socket 58 on /var/lib/.sock/zcfg_sockaddr15 successfully 
 +wwanbackup info: WWANBACKUP start 
 +wwanbackup info: WWANBACKUP_DEBUG is 0 
 +starting smbd. 
 +samba start ok 
 +Initial bevoiceSrv.... 
 +Initial bevoiceCap.... 
 +Initial bevoiceCapSip.... 
 +bePppIfaceSet: PPP.Interface.1 
 +bePppIfaceSet : Enable new or enable existing 
 +Initial bevoiceCapCodec.... 
 +Initial bevoiceCommon.... 
 +Initial bevoiceProf.... 
 +Initial bevoiceProfSip.... 
 +Initial bevoiceProfFaxT38.... 
 +Initial bevoiceProfNumberingPlan.... 
 +Initial bevoiceProfNumberingPlanPrefixInfo.... 
 +Initial bevoiceProfRTP.... 
 +Initial bevoiceProfRTPSRTP.... 
 +Initial bevoiceLine.... 
 +Initial bevoiceLineSip.... 
 +Initial bevoiceLineProc.... 
 +Initial bevoiceLineCallingFeatures.... 
 +Initial bevoiceLineCodecList.... 
 +Initial bevoiceLineStats.... 
 +Initial bevoiceLineRinger.... 
 +Initial bevoiceLineRingerDescription.... 
 +Initial bevoicePhyIntf.... 
 +Initial bevoiceSpeedDialBookList.... 
 +Initial bevoiceCallPolicyBook.... 
 +Initial bevoiceCallPolicyBookList.... 
 +Initial bevoiceCallStatus.... 
 +Initial bednsentry.... 
 +Initial bezx.... 
 +Initial bedlna.... 
 +Initial bevlangroup.... 
 +Initial beTFTPServerName.... 
 +Initial bespeedtest.... 
 +Initial beoneconnect.... 
 +Initial beoneconnectPCRule.... 
 +Initial bePwrMgmt.... 
 +Initial bewifi_easymesh.... 
 +Initial bewifi_onessid.... 
 +Back-end module init finished 
 +Initial USB driver... 
 +turn on ztr69 
 +zcfgFeTr98QueryHandleRoutInit 
 +cwmp_get_acsInfo: reset redirect server 
 +1970-01-01 00:01:18 ztr69<1557>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 9 bind server socket 59 on /var/lib/.sock/zcfg_sockaddr9 successfully 
 +/bin/sh: /etc/init.d/mcpd.sh: not found 
 +START enable Lan and Wan... 
 +/bin/sh: /usr/sbin/zy1905: not found 
 +/bin/sh: /usr/sbin/zy1905Monitor: not found 
 +rm: can't remove '/tmp/app_sock': No such file or directory 
 +TR181 object IP.Interface.1 
 +writing RSA key 
 +bridge name br0 
 +Initial http with port(20443), SSL enable. 
 +database_init : /data/netprb_db_ver 
 +database_init : database_ver 18 
 +database_init : Create Device table 
 +database_init : Create Sub Interface table 
 +database_init : Create L2 Device Functions table 
 +arp_init     : arp_event->event_id 1 
 +layer2_init  : layer2_event->event_id 2 
 +oui_init     : oui_event->event_id 3 
 +ethlink_init : ethlink_event->event_id 4 
 +zy1905_init  : zy1905_event->event_id 5 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:22 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:22 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 +1970-01-01 00:01:23 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:23 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +[/sbin/usb-hotplug.sh] add /var/usb/usb1 
 +1970-01-01 00:01:24 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:24 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:25 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:25 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +1970-01-01 00:01:26 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:26 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:27 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:27 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:27 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +1970-01-01 00:01:28 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:28 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:29 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:29 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:29 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:30 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:30 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:31 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:31 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:31 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:32 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:32 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:33 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:33 zhttpd_rest<1628>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828 
 +1970-01-01 00:01:33 one_connect_monitor<1695>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:34 zupnp<1638>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 65676 
 +1970-01-01 00:01:34 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004 
 +1970-01-01 00:01:35 zhotplugd<1526>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016 
 +1970-01-01 00:01:35 zcmd<459>, zcmd.c:6410, main(), WARNING: process msg type = 2 with reply, oid = 65676, from EID = 17 by 14553 ms 
 +zyExtRemoteMgmtSrvObjGet : Enter 
 +l3fwdObjGet : Enter 
 +l3fwdGetDfGwByRtTable: enter, 4 
 +DeviceDiscRespPayload={ 
 +   "ApiName": "ZYXEL RESTful API", 
 +   "ModelName": "VMG8825-T50", 
 +   "SoftwareVersion": "V5.50(ABPY.1)b11", 
 +   "DeviceMode": "Router", 
 +   "SupportedApiVersion":
 +     { 
 +       "ApiVersion": "1.0", 
 +       "LoginURI": "\/api\/v1\/UserLogin", 
 +       "Protocol": "HTTPS", 
 +       "HttpsPort": 20443 
 +     } 
 +   ], 
 +   "MAC": "08:26:97:DA:DD:80" 
 + } 
 +1970-01-01 00:01:35 zhttpd_rest<1628>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 77 bind server socket 13 on /var/lib/.sock/zcfg_sockaddr77 successfully 
 +hotplug:beUsbPortSet: USB Port Alias is cpe- 
 +hotplug:beUsbPortSet: USB Port Type is Device 
 +db_init() Open database: not an error 
 +APP Agent UDP socket ready! 
 +l3fwdGetDfGwByRtTable: ifname =   
 +l3fwdGetDfGwByRtTable: No find default gateway interface!! 
 +Restarting ZyIMS VoIP 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 + 
 +ppe cmd done! 
 +killall: voiceApp: no process killed 
 + 
 +ppe cmd done! 
 +killall: mm.exe: no process killed 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +killall: icf.exe: no process killed 
 + 
 +ppe cmd done! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 + 
 +ppe cmd done! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +done 
 +device ra0 is already a member of a bridge; can't enslave it to bridge br0. 
 +device ra1 is already a member of a bridge; can't enslave it to bridge br0. 
 +[/sbin/wwan-package-match.sh] VID 1d6b no match, exit 
 +bePtmLinkStatGet : Enter 
 + 
 +============================================================================ 
 +UPnP Mapping table Dump: 
 +TR98 Object Name                                                            : UPnP service Id 
 +InternetGatewayDevice.Layer3Forwarding                                      : urn:upnp-org:serviceId:Layer3Forwarding.1 
 +============================================================================ 
 + 
 +l3fwdObjGet : Enter 
 +l3fwdGetDfGwByRtTable: enter, 4 
 +/bin/sh: zy1905App: not found 
 +l3fwdGetDfGwByRtTable: ifname =   
 +l3fwdGetDfGwByRtTable: No find default gateway interface!! 
 +[/sbin/usb-hotplug.sh] add /var/usb/usb2 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +[MM] main(): getpid = 1882 
 +AppRegisterSignal(): mm.exe pid = 1882 
 +UITimer_Init()... 
 +[MM]dspDriverDeinit(): DSP & Phone Port driver is already De-initialized ==> skip the action!! 
 +UITimerProc(): The UI Timer System (thread task: 'vo-USR-UItimer', pid=1882) is running... 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +AppRegisterSignal(): voiceApp pid = 1883 
 +UITimer_Init()... 
 +1970-01-01 00:01:39 voiceApp<1883>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 12 bind server socket 10 on /var/lib/.sock/zcfg_sockaddr12 successfully 
 + 
 +### ZyIMS VoIP TR-104 Config Data Init Procedure Start ### 
 + 
 +UITimerProc(): The UI Timer System (thread task: 'vo-USR-UItimer', pid=1883) is running... 
 +1970-01-01 00:01:40 zupnp<1638>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 17 bind server socket 14 on /var/lib/.sock/zcfg_sockaddr17 successfully 
 +main(): getpid = 1881 
 + 
 +[ENTERED]:ICF_ES 
 + 
 +INFO: AUTO_SCALE: 1  
 + 
 +INFO: MODE_OF_OPERATION: 0  
 + 
 +INFO: SIP_COMPACT_HDRS: NO  
 + 
 +INFO: NW_TRACE_ENABLED: YES  
 +INFO: ICF_DEF_SIP_SERVER_PORT: 6062  
 +INFO: ICF_DEF_SIP_PROXY_PORT: 6061  
 +INFO: TRANSPORT_MODE: 0  
 +INFO: ICF_SYS_RESOURCE_LIMIT: 1  
 + 
 +[ENTERING]:icf_es_init 
 +[ICF_ES]:PORT initalized succesfully 
 +icf_port_open_ipc_channel path = /var/iptk_es.chanl 
 + 
 +the open channel succeded  
 +exit from the es init  
 +icf_register_signal(): icf.exe pid = 1881 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:42 voiceApp<1883>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 12, select() wait forever, EID = 1, type = 1 with reply, oid = 468 
 +1970-01-01 00:01:42 esmd<524>, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 61608 
 +1970-01-01 00:01:42 zcmd<459>, zcfg_msg.c:242, _msg_recv(), WARNING: EID = 1, select() wait for 2000 milli-seconds, EID = 12, type = 2004 with reply, oid = 0 
 +1970-01-01 00:01:42 zcmd<459>, zcfg_msg.c:844, zcfg_msg_sendAndGetReply(), ERROR: fail to receive message. ret = -1 
 +<<Error>> beVoiceCapConfigStatsUpdate() beVoiceSendMsgToZyIMSAndGetReply failed -5 use default list 
 +1970-01-01 00:01:42 zcmd<459>, zcmd.c:6410, main(), WARNING: process msg type = 1 with reply, oid = 468, from EID = 12 by 2031 ms 
 +hotplug:beUsbPortSet: USB Port Alias is cpe- 
 +hotplug:beUsbPortSet: USB Port Type is Device 
 +1970-01-01 00:01:42 esmd<524>, esmd.c:1565, processRequest(), WARNING: process msg type = 235 without reply, oid = 0, from EID = 1 by 24824 ms 
 +zcmd.c line 5582, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FIN 
 +ECONET/zcmd_wrapper.c line 2046, zcmdEnableConfigSave() : enable tr98mapTableSaveFlag and configSaveFlag 
 +tr104ConvertPortsType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialingType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertReceiveToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDPayloadType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +tr104ConvertPortsType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialingType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertDialToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertReceiveToneType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertCallerIDPayloadType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +tr104ConvertRegType(): <<Error>> INVALID parameter value : '' !! 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +mapd_interface_ctrl_open failed 
 +Can't connect to /tmp/mapd_ctrl 
 +json_object_from_file: error opening file /tmp/dump.txt: No such file or directory 
 +[initALTable] second chance - dump information is not ready.  
 +Update 1905 information Error!! 
 +tr104ConvertCWStatus(): <<Error>> INVALID parameter value : '' !! 
 +tr104ConvertRegType(): <<Error>> INVALID parameter value : '' !! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +tr104ConvertCWStatus(): <<Error>> INVALID parameter value : '' !! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 + 
 +### ZyIMS VoIP TR-104 Config Data Init Procedure Successfully Finished ### 
 + 
 +MM:voiceDspCoreInit(): Entering... 
 +[MM]dspDriverInit(): Start to initialize the DSP (& Phone Port) driver by calling 'PhoneInit(countryCode=24)'... 
 +PhoneInit(): region: 'NLD'
 +Country Name:NLD 
 +result:9475208 
 +result:-9475208 
 +VDSP_GetInstance:278 
 +MM:voiceDspCoreInit(): after calling 'dsp_driver_itf.c/dspDriverGetInitData(initData@0x0, initDataLength=0)' to get the inited data of the MM part 'Endpoint_itf_mm.c/cmPhysEndpt[MAX_ENDPT]'... 
 +MM:voiceDspCoreInit(): after calling 'voiceEventIpcSendToVoiceApp()' to send the response message 'VOICE_DSP_INIT_RSP' back to [voiceApp]... 
 +MM:voiceDspCoreInit(): Exiting...with ret=1 & ret2=1 (MM_SUCCESS(1), MM_FAILURE(0)) 
 +[Adam] Change log level to (EVA_LOG_ERR). 
 +[GDI] Change log level to (EVA_LOG_ERR). 
 +fxsPhoneIOP_hookFlashDetecTimerSet(): <<Error>>Invalid input timer value {flashTimerMin=0, flashTimerMax=0} for the FXS phone port index-0!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0! 
 +fxsPhoneIOP_hookFlashDetecTimerSet(): <<Error>>Invalid input timer value {flashTimerMin=0, flashTimerMax=0} for the FXS phone port index-1!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0! 
 +voiceDspInit(): <<Error>> The Phone (DSP Init) Data: LocationPtr=0x00000000, Size=-1!! 
 +DSP state is Inactive , so exit PhoneInitEventCb now 
 +DSP activated success 
 +taskCreate()... 
 +voiceDspInit(): Leaving with return 0... 
 + phonePortVMWISet enters (for 'FXS' phone, phid=8 (8:All 'Ports' of the type), vmwiSigType=2 (1:SigOn,2:SigOff,0:SigNone))... 
 +in PhoneEventCb , the event 18 is not support !  
 +in PhoneEventCb , the event 18 is not support !  
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +taskCreate()... 
 +flushVoipRoutePolicy(): cmd = iptables -t mangle -F IP_ROUTE2_VOIP 
 + 
 +### ZyIMS VoIP Start-up Procedure Finished ### 
 + 
 +zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'MEX' is NOT supported, Skip it!! 
 +zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'CYP' is NOT supported, Skip it!! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +1970-01-01 00:01:49 voiceApp<1883>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendto /var/lib/.sock/zcfg_sockaddr1-1573323, errno = 2(No such file or directory), srcEid = 12, dstEid = 1, type = 103 without reply, oid = 0 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +get_iface_ipv4_address(): <<Error>> ioctl socket 'SIOCGIFADDR' fail for ifName() ==> try to get IP address info by searching the 'iface_ipv4_address_list[]' array database alternatively!! 
 +get_iface_ipv4_address(): <<Error>> Can't find any matched ifName() even in the 'iface_ipv4_address_list[]' array database!! 
 +mmCfgSelfIp()/SipAcctId=0: <<Error>> calling 'get_iface_ipv4_address()' to get the IP Address FAIL for the interface pProf->ZyXEL_ActiveBoundIfName='' (where pProf->name='ChangeMe', ZyXEL_BoundIfName='Multi_WAN', ZyXEL_BoundIfList='IP.Interface.4,IP.Interface.7,IP.Interface.10', ZyXEL_BoundIpAddr='') ==> return FALSE now!! 
 +mmCfgOfRtpInfo()/SipAcctId=0: <<Error>> MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!! 
 +mmIptkCfgOfSipAccount(PID = 1883): <<Error>> 'mmCfgOfRtpInfo(sipAccountId=0)' FAIL ===> try to continue processing the next SIP Account!! 
 +get_iface_ipv4_address(): <<Error>> ioctl socket 'SIOCGIFADDR' fail for ifName() ==> try to get IP address info by searching the 'iface_ipv4_address_list[]' array database alternatively!! 
 +get_iface_ipv4_address(): <<Error>> Can't find any matched ifName() even in the 'iface_ipv4_address_list[]' array database!! 
 +mmCfgSelfIp()/SipAcctId=1: <<Error>> calling 'get_iface_ipv4_address()' to get the IP Address FAIL for the interface pProf->ZyXEL_ActiveBoundIfName='' (where pProf->name='ChangeMe', ZyXEL_BoundIfName='Multi_WAN', ZyXEL_BoundIfList='IP.Interface.4,IP.Interface.7,IP.Interface.10', ZyXEL_BoundIpAddr='') ==> return FALSE now!! 
 +mmCfgOfRtpInfo()/SipAcctId=1: <<Error>> MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!! 
 +mmIptkCfgOfSipAccount(PID = 1883): <<Error>> 'mmCfgOfRtpInfo(sipAccountId=1)' FAIL ===> try to continue processing the next SIP Account!! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +rm: can't remove '/tmp/app_sock': No such file or directory 
 +aging_en: 1, aging time: 5 
 +aging_unit: 0, aging_cnt: 4 
 +write reg: a0, value: 4000 
 +get_if_info for br0 
 +interface index is 19 
 +get_if_info OK 
 +Clean up temporary socket 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +bind_arp: ifindex=19 
 +Binding to ifindex 19 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +bind_arp: ifindex=16 
 +Binding to ifindex 16 
 + 
 +ppe cmd done! 
 + 
 +ppe cmd done! 
 +MAC: 0x7fa8dc2c, len = 6 
 +0x0000 : 08 26 97 da dd 81  
 +bind_arp: ifindex=20 
 +Binding to ifindex 20 
 +done 
 +bind_arp: ifindex=21 
 +Binding to ifindex 21 
 +bind_arp: ifindex=22 
 +Binding to ifindex 22 
 +bind_arp: ifindex=17 
 +Binding to ifindex 17 
 +rai0      bbp:2308=303 
 +/bin/sh: can't create /proc/tc3162/lan_to_wifi_rps: nonexistent directory 
 +bind_arp: ifindex=28 
 +Binding to ifindex 28 
 +bind_arp: ifindex=29 
 +Binding to ifindex 29 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +bind_arp: ifindex=30 
 +Binding to ifindex 30 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 +device rai0 is already a member of a bridge; can't enslave it to bridge br0. 
 +killall: p1905_managerd: no process killed 
 + opClass = 81, chn_num = 13 
 + opClass = 83, chn_num = 9 
 + opClass = 84, chn_num = 9 
 +device rai1 is already a member of a bridge; can't enslave it to bridge br0. 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 +device rai3 is already a member of a bridge; can't enslave it to bridge br0. 
 + opClass = 115, chn_num = 4 
 + opClass = 118, chn_num = 4 
 + opClass = 121, chn_num = 11 
 + opClass = 116, chn_num = 2 
 + opClass = 119, chn_num = 2 
 + opClass = 122, chn_num = 5 
 + opClass = 117, chn_num = 2 
 + opClass = 120, chn_num = 2 
 + opClass = 123, chn_num = 5 
 + opClass = 128, chn_num = 4 
 + opClass = 129, chn_num = 2 
 + opClass = 130, chn_num = 4 
 +[WAPP]map_send_wirelss_inf_info 
 +send info ra0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:81 
 +send info ra1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:81 
 +send info ra2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:81 
 +send info ra3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:81 
 +send info rai0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:82 
 +send info rai1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:82 
 +send info rai2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:82 
 +send info rai3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:82 
 +  inf_count = 8  
 + 0 name ra0 ch 2, phymode [N] role [wiap] 
 + 1 name ra1 ch 2, phymode [N] role [wiap] 
 + 2 name ra2 ch 2, phymode [N] role [wiap] 
 + 3 name ra3 ch 2, phymode [N] role [wiap] 
 + 4 name rai0 ch 52, phymode [AC] role [wiap] 
 + 5 name rai1 ch 52, phymode [AC] role [wiap] 
 + 6 name rai2 ch 52, phymode [AC] role [wiap] 
 + 7 name rai3 ch 52, phymode [AC] role [wiap] 
 +route: SIOCADDRT: File exists 
 +killall: mapd: no process killed 
 +daemon mapd attached \x00/tmp/wapp_ctrl 
 +ctrler_found  
 +[WAPP]map_send_wirelss_inf_info 
 +send info ra0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:81 
 +send info ra1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:81 
 +send info ra2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:81 
 +send info ra3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:81 
 +send info rai0, role: wiap, dev type = 1 
 +MAC Address = 08:26:97:da:dd:82 
 +send info rai1, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:da:dd:82 
 +send info rai2, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:ea:dd:82 
 +send info rai3, role: wiap, dev type = 1 
 +MAC Address = 0a:26:97:fa:dd:82 
 +Profile Count to host = 0 
 +rm: can't remove '/tmp/app_sock': No such file or directory 
 +bridge name br0 
 +database_init : /data/netprb_db_ver 
 +database_init : database_ver 18 
 +database_init : Create Device table 
 +database_init : Create Sub Interface table 
 +database_init : Create L2 Device Functions table 
 +arp_init     : arp_event->event_id 1 
 +layer2_init  : layer2_event->event_id 2 
 +oui_init     : oui_event->event_id 3 
 +ethlink_init : ethlink_event->event_id 4 
 +zy1905_init  : zy1905_event->event_id 5 
 +agentDataRecv: Start to receiving... 
 +0 ssid=TMNL-DADD81, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +1 ssid=TMNL-DADD81_guest1, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +2 ssid=TMNL-DADD81_guest2, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +3 ssid=TMNL-DADD81_guest3, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +1-iwpriv ra0 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra0 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv ra1 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra1 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv ra2 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra2 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv ra3 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv ra3 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +0 ssid=TMNL-DADD81, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +1 ssid=TMNL-DADD81_guest1, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +2 ssid=TMNL-DADD81_guest2_5G, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1 
 +send BH config to ra0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to ra3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai0 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai1 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai2 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +send BH config to rai3 
 +wapd sends WPAPSK = MRFNQVMQMXFBR4R9 
 +3 ssid=29a022df555f3c37f84a367e153831c, autmode=0x0020, encryptype=0x0008, key=d46025d0ff175f7d55ae756de8952d5a bh_bss=1, fh_bss=0 
 +send BH config to ra0 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to ra1 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to ra2 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to ra3 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai0 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai1 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai2 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +send BH config to rai3 
 +wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a 
 +1-iwpriv rai0 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai0 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv rai1 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai1 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv rai2 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai2 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +1-iwpriv rai3 set AuthMode=WPA2PSK; 
 +/bin/sh: wifi_config_save: not found 
 +2-iwpriv rai3 set EncrypType=AES; 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +/bin/sh: wifi_config_save: not found 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)]. 
 +Internal Error ~! 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrl 
 +Succesfully opened connection to mapd 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2023/05/23 23:28
  • by rupurudu1