ZyXEL USG1100
The ZyXEL ZyWALL 1100 is a high-performance firewall with eight configurable gigabit interfaces.
OpenWrt support
Dirty U-Boot is done.
In process.
Hardware highlights
| CPU | Ram | Flash | Network | WLAN | USB | Serial | JTag |
|---|---|---|---|---|---|---|---|
| Octeon cn6635 @ 800 MHz | 2048 MiB | 512 + 4 MiB | 8x 10/100/1000 | - | 2x 2.0 | Yes | Yes |
Hardware
Info
| Architecture | MIPS64 |
|---|---|
| Vendor | Cavium |
| Bootloader | U-Boot 2011.03 |
| System-On-Chip | Octeon cn6635 |
| CPU/Speed | 800 MHz |
| Flash-Chip | MX29LV320EBTI + K9F4G08U0D |
| Flash size | 512 + 4 MiB |
| RAM | 2048 MiB |
| Ethernet | 10/100/1000 Mbit/s w/ vlan support |
| Switch | Marvell 88e1149r |
| USB | 2x 2.0 |
| Serial | 115200n8 |
| JTAG | Standart MIPS Jtag |
Photos
SERIAL
| Serial connection parameters for ZyXEL USG1100 | 115200, 8N1, RS232 |
|---|
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
Bootlogs
OEM bootlog
U-Boot 2011.03 (Development build, svnversion: u-boot:422M, exec:exported) (Build time: Feb 21 2013 - 10:15:57) BootModule Version: V1.07 | 02/21/2013 10:45:46 DRAM: Size = 2048 Mbytes Press any key to enter debug mode within 3 seconds. ............................................................. Start to check file system... /dev/sda6: 504/20480 files (1.0% non-contiguous), 74192/81920 blocks /dev/sda7: 200/23040 files (8.0% non-contiguous), 26860/92160 blocks Done Kernel Version: V3.10.87 | 2023-05-24 10:23:34 ZLD Version: V4.73(AAAC.2) | 2023-05-24 10:55:57 INIT: version 2.86 booting Initializing Debug Account Authentication Seed (DAAS)... done. Setting the System Clock using the Hardware Clock as reference...System Clock set. Local time: Sun Jun 30 15:22:30 UTC 2024 INIT: Entering runlevel: 3 Insmod ZYKLOG Module. Starting zylog daemon: zylogd zylog starts. Starting syslog-ng secu-reporter. Starting ZLD Wrapper Daemon.... Starting uam daemon. Starting myzyxel daemon. Starting periodic command scheduler: cron. Start ZyWALL system daemon.... Starting link_updown daemon. Check signature package Check av signature package [ 49.919184] ADP version 3.12 loaded Cloud Query Daemon Start! .................. Applying system configuration file, please wait ............................. ZyWALL system is configured successfully with startup-config.conf Welcome to ZyWALL 1100 Username:
OpenWrt bootlog
COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING