Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:zyxel:nbg7815_armor_g5 [2024/10/31 16:07] – add section open case pwnedinbox:toh:zyxel:nbg7815_armor_g5 [2024/12/13 11:35] – [Hardware] pwned
Line 10: Line 10:
 ===== Hardware ===== ===== Hardware =====
  
-^ CPU                           ^ Ram  ^ Flash                    ^ Network                                 ^ Wifi          ^ USB         ^ Serial ^ +^ Architecture        | ARMv8                                                                   | 
-| Qualcomm IPQ8074A @ 2.2 GHz | 1 GB | 4 GB eMMC + 8 MB SPI NOR | 1x 1/2.5/5/10 GbE 1x 1/2.5 GbE 4x 1 GbE | a/b/g/n/ac/ax | 1x 3.1 Gen2 | [[#Serial|Yes]] | +^ Vendor              | Qualcomm                                                                | 
-<hidden> +^ Bootloader          | U-Boot + ZyXEL zLoader                                                  | 
-^ Architecture      | ARMv8                                                                   | +^ System-On-Chip      | Qualcomm IPQ8074A                                                       | 
-^ Vendor            | Qualcomm                                                                | +^ CPU/Speed           | Quad Core 2.2 GHz                                                       | 
-^ Bootloader        | U-Boot + ZyXEL zLoader                                                  | +^ Flash-Chip          | Kingston EMMC04G-M627 + Winbond W25Q64DW                                | 
-^ System-On-Chip    | Qualcomm IPQ8074A                                                       | +^ Flash size          | 4 GB eMMC + 8 MB SPI NOR                                                | 
-^ CPU/Speed         | Quad Core 2.2 GHz                                                       | +^ RAM                 | 1 GB 2x Nanya NT5CC256M16ER-EK                                          | 
-^ Flash-Chip        | Kingston EMMC04G-M627 + Winbond W25Q64DW                                | +^ Bluetooth           | CSR8811 using HSUART                                                    | 
-^ Flash size        | 4 GB eMMC + 8 MB SPI NOR                                                | +^ Wireless            | QCN5024 bgn+ax                                                          | 
-^ RAM               | 1 GB 2x Nanya NT5CC256M16ER-EK                                          | +^ Wireless            | QCN5054 an+ac+ax                                                        | 
-^ Bluetooth         | CSR8811 using HSUART                                                    | +^ Ethernet            | 4x 10/100/1000 Mbps + 1x 1/2.5 GbE + 1x 1/2.5/5/10 GbE                  | 
-^ Wireless          | QCN5024 bgn+ax                                                          | +^ Ethernet            | ETH chip1: IPQ8074A + ETH chip2: QCA8081 + ETH chip3: Aquantia AQR113C 
-^ Wireless          | QCN5054 an+ac+ax                                                        | +^ Switch              | Qualcomm Atheros QCA8075                                                | 
-^ Ethernet          | 4x 10/100/1000 Mbps + 1x 1/2.5 GbE + 1x 1/2.5/5/10 GbE                  | +^ USB                 | 1x 3.1 Gen2, 5V/900mA                                                   
-^ Ethernet          | ETH chip1: IPQ8074A + ETH chip2: QCA8081 + ETH chip3: Aquantia AQR113C +^ [[#Serial|Serial]]  | TTL 115200, 8N1, 3.3V                                                   | 
-^ Switch            | Qualcomm Atheros QCA8075                                                | +^ PSU                 | 19VDC 2.1A                                                              |
-^ USB               | 1x 3.1 Gen2                                                             +
-^ [[#Serial|Serial]]| TTL 115200, 8N1, 3.3V                                                   | +
-^ PSU               | 19VDC 2.1A                                                              | +
-</hidden>+
 \\ \\
  
Line 338: Line 334:
 ==== Opening the case ==== ==== Opening the case ====
  
-1. Remove the two rubber crosses from the device' bottom side. +  - Remove the two rubber crosses from the device' bottom side. 
-2. Unscrew the two screws appearing after step 1. +  Unscrew the two screws appearing after step 1. 
-3. Remove the socket. +  Remove the socket. 
-4. After step 3. another four screws appear. Remove them as well. +  After step 3. another four screws appear. Remove them as well. 
-5. Around the device' case there are six clips* on the bottom case part inside and five on the uppper shell inside+  Around the device' case there are eleven clips* inside (two on each side, four in front and three in back) tying the upper shell with the bottom side
-6. Keep the device with bottom side up and pry it up carefully around the case to remove the bottom side. Start at the side where the connectors are lead out.+  Keep the device with bottom side up and pry it up carefully around the case to remove the bottom side. Start at the side where the connectors are lead out. 
 + 
 +*) You will likely break some of them. Especially those on the left or right side. The clips at the front's case are very tight clipped because of the case' shape and the fact that there are four of them. 
 +\\
  
-*) You will likely break some of themEspecially those on the left or right sideThe clips at the front's case are very tight clipped because of the case' shape and the fact that they are four of them.+{{media:zyxel:nbg7815_open_1.jpg?350}} 
 +{{media:zyxel:nbg7815_open_2.jpg?350}} 
 +{{media:zyxel:nbg7815_open_3.jpg?350}}
  
 ==== Serial ==== ==== Serial ====
  • Last modified: 2024/12/13 12:10
  • by pwned