Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:zyxel:nbg7815_armor_g5 [2023/01/18 19:47] – [Installing OpenWrt] avalentininbox:toh:zyxel:nbg7815_armor_g5 [2024/10/31 16:08] – case pwned
Line 1: Line 1:
 ====== ZyXEL NBG7815 (Armor G5) ====== ====== ZyXEL NBG7815 (Armor G5) ======
-~~NOTOC~~ 
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page */+AX6000 (1200+4800 Mbps) 12-Stream Multi-Gigabit WiFi 6 Router. 2.4GHz AX: 4x4 (Tx/Rx) 1024 QAM 20/40 MHz, up to 1.2 Gbps. 5GHz AX8x8 (Tx/Rx) 1024 QAM 20/40/80/160 MHz, up to 4.8 Gbps.
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+{{media:zyxel:nbg7815:img_armor_ngb7815_t_600.png?350|Zyxel NBG7815 (Armor G5)}} {{media:zyxel:nbg7815:img_armor_ngb7815_r_01_600.png?350|Zyxel NBG7815 (Armor G5)}}
  
-AX6000 12-Stream Multi-Gigabit WiFi Router+[[https://www.zyxel.com/us/en-us/products/wifi-router/ax6000-12-stream-multi-gigabit-wifi-6-router-armor-g5|ZyXEL NBG7815 product page]]\\ 
 +\\
  
-/*****/ +===== Hardware =====
-/* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki */ +
-/*****/+
  
-{{ media:zyxel:nbg7815.png?200|Zyxel NBG7815 (Armor G5)}}+^ CPU                           ^ Ram  ^ Flash                    ^ Network                                 ^ Wifi          ^ USB         ^ Serial ^ 
 +| Qualcomm IPQ8074A @ 2.2 GHz | 1 GB | 4 GB eMMC + 8 MB SPI NOR | 1x 1/2.5/5/10 GbE 1x 1/2.5 GbE 4x 1 GbE | a/b/g/n/ac/ax | 1x 3.1 Gen2 | [[#Serial|Yes]] | 
 +<hidden> 
 +^ Architecture      | ARMv8                                                                   | 
 +^ Vendor            | Qualcomm                                                                | 
 +^ Bootloader        | U-Boot + ZyXEL zLoader                                                  | 
 +^ System-On-Chip    | Qualcomm IPQ8074A                                                       | 
 +^ CPU/Speed         | Quad Core 2.2 GHz                                                       | 
 +^ Flash-Chip        | Kingston EMMC04G-M627 + Winbond W25Q64DW                                | 
 +^ Flash size        | 4 GB eMMC + 8 MB SPI NOR                                                | 
 +^ RAM               | 1 GB 2x Nanya NT5CC256M16ER-EK                                          | 
 +^ Bluetooth         | CSR8811 using HSUART                                                    | 
 +^ Wireless          | QCN5024 bgn+ax                                                          | 
 +^ Wireless          | QCN5054 an+ac+ax                                                        | 
 +^ Ethernet          | 4x 10/100/1000 Mbps + 1x 1/2.5 GbE + 1x 1/2.5/5/10 GbE                  | 
 +^ Ethernet          | ETH chip1IPQ8074A + ETH chip2QCA8081 + ETH chip3: Aquantia AQR113C 
 +^ Switch            | Qualcomm Atheros QCA8075                                                | 
 +^ USB               | 1x 3.1 Gen2                                                             | 
 +^ [[#Serial|Serial]]| TTL 115200, 8N1, 3.3V                                                   | 
 +^ PSU               | 19VDC 2.1A                                                              | 
 +</hidden> 
 +\\
  
-===== OpenWrt support =====+===== OpenWrt Firmware =====
  
-===== Supporting activities =====+^ Stable (v23.05.5) (sysupgrade image) ^ 
 +| [[https://downloads.openwrt.org/releases/23.05.5/targets/ipq807x/generic/openwrt-23.05.5-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin|openwrt-23.05.5-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin]] | 
 +^ Snapshot (sysupgrade image) ^ 
 +| [[https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-zyxel_nbg7815-squashfs-sysupgrade.bin|openwrt-qualcommax-ipq807x-zyxel_nbg7815-squashfs-sysupgrade.bin]] |
  
-  * OpenWrt forum thread: https://forum.openwrt.org/t/openwrt-support-for-armor-g5-nbg7815/98598/11+You only need one of the available sysupgrade imagesThe other available images are needed for special purposes only.
  
 +**Other images (factory, initramfs)**
 +<hidden>
 +^ Stable (v23.05.5) (factory image) ^
 +| [[https://downloads.openwrt.org/releases/23.05.5/targets/ipq807x/generic/openwrt-23.05.5-ipq807x-generic-zyxel_nbg7815-squashfs-factory.bin|openwrt-23.05.5-ipq807x-generic-zyxel_nbg7815-squashfs-factory.bin]] |
 +^ Snapshot (factory image) ^
 +| [[https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-zyxel_nbg7815-squashfs-factory.bin|openwrt-qualcommax-ipq807x-zyxel_nbg7815-squashfs-factory.bin]] |
 +^ Stable (v23.05.5) (initramfs image) ^
 +| [[https://downloads.openwrt.org/releases/23.05.5/targets/ipq807x/generic/openwrt-23.05.5-ipq807x-generic-zyxel_nbg7815-initramfs-uImage.itb|openwrt-23.05.5-ipq807x-generic-zyxel_nbg7815-initramfs-uImage.itb]] |
 +^ Snapshot (initramfs image) ^
 +| [[https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-zyxel_nbg7815-initramfs-uImage.itb|openwrt-qualcommax-ipq807x-zyxel_nbg7815-initramfs-uImage.itb]] |
 +</hidden>
 +\\
  
-===== Experimental firmware =====+===== Limitations =====
  
-List experimental firmware download links here.+Currently (state of 2024) OpenWrt officially **__does not support__** the integrated FAN, the integrated LED. 
 +  * LED: [[https://github.com/openwrt/openwrt/pull/15504|PR 15504]] 
 +  * FAN: [[https://github.com/openwrt/openwrt/pull/14210|PR 14210]] 
 +  * 5G 160MHz channel width is not supported officially. There is [[https://forum.openwrt.org/t/qualcommax-nss-build/148529/3376|hack]] available. For those doing their own builds. 
 +:!: The device can **really run hot due to the disabled fan leading to throttling and instabilities**. Esp. if an USB device is connected. You be advised to either deploy an active cooler directed to the device itself or making your own build integrating the patch referenced above for proper cooling. To the state of 2024 this FAN patch is not working reliable. But there are others (simpler, script based) solutions available (which could disappear/change over time) e. g.: [[https://github.com/asvio/openwrt|by asvio]], [[https://github.com/ddimension/openwrt/commit/4e4d1d2d8eaabc4dd0ee0b73b918a0504399977c|by ddimension]], [[https://github.com/psychowood/openwrt-armor-g5-nbg7815/commit/8ca55067afaf232c154238e0fffdda1e028ce57c|by psychowood]], [[https://github.com/pwned-pixel/nbg7815-fancontrol/commit/684928197983ca1920bbeae7fea8e9243855e365|by pwned-pixel]]. There are more available just ask/look within the [[https://forum.openwrt.org/t/openwrt-support-for-armor-g5-nbg7815/98598/11|Forum Support Thread]]\\ 
 +\\
  
-[[https://github.com/ddimension/openwrt/releases]]+===== Forum Support Thread =====
  
 +[[https://forum.openwrt.org/t/openwrt-support-for-armor-g5-nbg7815/98598/11|openwrt-support-for-armor-g5-nbg7815]]\\
 +\\
  
-===== Hardware highlights ===== +===== Installation =====
-^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^ +
-| IPQ8074A @ 2.2 GHz    1 GB  |  4 GB eMMC |  1x 1/2.5/5/10 GbE 1x 1/2.5 GbE 4x 10/100/1000 Mbps  |  a/b/g/n/ac/ax    1x 3.1 Gen2  |   Yes    |   ?    |+
  
 +==== Pre-Requirements ====
  
 +To install OpenWrt on this device **Root/SSH access is required**.
 +You can gain Root/SSH access with the following process using a terminal application. For Windows the most known is [[https://www.putty.org|putty]]. For Linux/MAC OS choose any you want resp. its default terminal application.
  
-===== Installation ===== +  - Disconnect the WAN cable of the router. Do not plug in back the WAN cable during the whole process! 
-/* → [[:downloads|Obtain firmware]] +  Reset the device to factory defaults by pushing and holding the reset button for ~15 seconds immediately after turning it on. The LED should light up orange. 
-  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]] +  - After ~5-10 minutes, when the LED is constant dark blue, connect your computer to one of the yellow LAN ports and wait for the connection to be established. 
-  - → [[:downloads|Latest OpenWrt release]] +  - Do not setup the router yet! Access the device via **Telnet** using address192.168.123.1 / port 23. On the prompt (NBG7815 login) login with username''**root**'' / password: ''**nbg7815@2019**'' E. g. On a Linux Terminal: ''**telnet 192.168.123.1 -p 23**'' using the password ''**nbg7815@2019**'' 
-*/+  - **Enable permanent Root/SSH access** for this device **by copy and paste the script lines from below**. It will prevent a root password change which happens after finishing the setup and enable dropbear/SSH. 
 +  - Reboot the device
 +  - Check if SSH access is working by using address''**192.168.123.1**'' / port: ''**22**'' / username: ''**root**'' / password: ''**OpenWrt**'' E. g. On a Linux Terminal: ''**ssh -oStrictHostKeyChecking=no -oUserKnownHostsFile=/dev/null root@192.168.123.1 -p 22**'' using the password ''**OpenWrt**'' 
 +<tabbox Enable Root/SSH access> 
 +<code> 
 +awk '/ckNowChangeDefaultCg/{f=0} f{$0="#" $0} /#dropbear/{f=1} 1' /rom/etc/init.d/preboot > /etc/init.d/preboot
  
 +echo -e 'OpenWrt\nOpenWrt' | passwd root
 +cp /etc/shadow /etc/shadow.bak
  
-==== Installing OpenWrt ==== +sed -i '/exit 0/i \ 
-1**Factory to Openwrt**: + \ 
-All operations needs root access->  [[#Root Access]]:+uci set dropbear.setting.enable=1 \ 
 +uci commit dropbear \ 
 +uci set network.general.auto_ip_change=0 \ 
 +uci commit network \ 
 +/etc/init.d/dropbear enable \ 
 +/etc/init.d/dropbear restart \ 
 +chmod +w /etc/shadow \ 
 +cp /etc/shadow.bak /etc/shadow \ 
 +chmod -w /etc/shadow \ 
 + \ 
 + \' /etc/rc.local
  
-Login as root and make below steps:+chmod -w /etc/init.d/preboot 
 +chmod -w /etc/config/dropbear 
 +chmod -w /etc/rc.local 
 +chmod -w /etc/shadow 
 +</code> 
 +</tabbox> 
 +\\
  
-1. Put Openwrt image to your router, you have two options:+==== Backup ====
  
-a) Use WinSCP client(if you have ssh accessfor putting your openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin in /tmp/ApplicationData/+Before you modify the device it is always good idea to make a backup of the flash drive(sinstalled. The generic process is described [[:docs:guide-user:installation:generic.backup|here]].\\ 
 +We have one 8MB SPI NOR flash chip and one 4GB emmc flash chip. For both you can use dd. The partition layout of both chips is described [[#Flash-/Partition-Layout|here]].\\ 
 +You can spare out the last two big partitions on the emmc chip if you want. They are not important. Transfer the files either via USB or ssh/scp.\\ 
 +\\
  
-b) login as root, go to /tmp/ApplicationData and get latest **nbg7815-squashfs-sysupgrade** version from site https://github.com/ddimension/openwrt/releases using **wget**+==== Installing OpenWrt ====
  
-2. Download flash script [[https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh]] and put in catalog /tmp/ApplicationData+:!: **Do not power off the device during the process!**
  
-3Make sure that sysupgrade image and script is in folder /tmp/ApplicationData/ folder +  - Login as root via SSH. 
 +  - Change to directory ''**/tmp/ApplicationData**''
 +  - Get the [[#OpenWrt Firmware|OpenWrt Firmware]] onto your router by either a) or b):\\ a) The device to has internet access for downloading the OpenWrt firmware file to the device using wget.\\ b) Download the OpenWrt firmware to your computer and move the file to a FAT or NTFS formatted USB drive. Connect the USB drive to your router and mount the USB device. Copy the file to /tmp/ApplicationData. 
 +  - Extract the firmware file. 
 +  - Determine the bootconfig of the device and flash OpenWrt to the currently not active kernel and rootfs partitions. 
 +  - Mark the partitions to boot OpenWrt. 
 +  - Reboot the device.
  
-4run flash_to_openwrt.sh+<tabbox Semi-automatic (Step 2-7)><WRAP><code> 
 +cd /tmp/ApplicationData 
 +wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-zyxel_nbg7815-squashfs-sysupgrade.bin 
 +wget https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh 
 +sh flash_to_openwrt.sh 
 +</code></WRAP>
  
-After that, reset router manually (power off/on) +<tabbox Step 2-6><WRAP><code> 
 +# Author: Karol Przybylski <itor@o2.pl> 
 +# https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh
  
 +# Step 2
 +cd /tmp/ApplicationData
  
-Example:+# Step 3 
 +wget -O zyxel_nbg7815-squashfs-sysupgrade.bin https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-zyxel_nbg7815-squashfs-sysupgrade.bin 
 +if [ ! -f "/tmp/ApplicationData/zyxel_nbg7815-squashfs-sysupgrade.bin" ]; then 
 +     echo "Cannot find image zyxel_nbg7815-squashfs-sysupgrade.bin" 
 +     exit 1 
 +fi
  
-    root@NBG7815:~cd /tmp/ApplicationData +Step 4 
-    root@NBG7815:~# wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin https://github.com/ddimension/openwrt/releases/download/ipq807x-2023-01-12-2115/openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin +tar xvf zyxel_nbg7815-squashfs-sysupgrade.bin
-    root@NBG7815:~# wget https://raw.githubusercontent.com/itorK/nbg7815_tools/main/flash_to_openwrt.sh +
-    root@NBG7815:~# ./flash_to_openwrt +
-    root@NBG7815:~# reboot+
  
-2. **If you already have OpenWrt use sysupgrade or LuCi "Flash new firware image" option, after this operation use script from [[https://github.com/itorK/nbg7815_tools/blob/main/change_boot_partition.sh]] to change boot partition**+# Step 5 
 +primaryboot_hlos=$(cat /proc/boot_info/0:HLOS/primaryboot) 
 +if $primaryboot_hlos -eq 0 ]; then 
 +     dd if=/dev/zero of=/dev/mmcblk0p7 
 +     dd if=/tmp/ApplicationData/sysupgrade-zyxel_nbg7815/kernel of=/dev/mmcblk0p7 
 +     echo 1 > /proc/boot_info/0:HLOS/primaryboot 
 +else 
 +     dd if=/dev/zero of=/dev/mmcblk0p3 
 +     dd if=/tmp/ApplicationData/sysupgrade-zyxel_nbg7815/kernel of=/dev/mmcblk0p3 
 +     echo 0 > /proc/boot_info/0:HLOS/primaryboot 
 +fi
  
 +primaryboot_rootfs=$(cat /proc/boot_info/rootfs/primaryboot)
 +if [ $primaryboot_rootfs -eq 0 ]; then
 +     dd if=/dev/zero of=/dev/mmcblk0p8
 +     dd if=/tmp/ApplicationData/sysupgrade-zyxel_nbg7815/root of=/dev/mmcblk0p8
 +     echo 1 > /proc/boot_info/rootfs/primaryboot
 +else
 +     dd if=/dev/zero of=/dev/mmcblk0p4
 +     dd if=/tmp/ApplicationData/sysupgrade-zyxel_nbg7815/root of=/dev/mmcblk0p4
 +     echo 0 > /proc/boot_info/rootfs/primaryboot
 +fi
  
-===== Debricking ===== +# Step 6 
-**Return to original firmware from Openwrt**+mkdir /tmp/ApplicationData/boot 
 +cat /proc/boot_info/getbinary_bootconfig > /tmp/ApplicationData/boot/bootconfig_new.bin 
 +echo 1 > /proc/mtd_writeable 
 +dd if=/tmp/ApplicationData/boot/bootconfig_new.bin 2>/dev/null | mtd -e "/dev/mtd2" write - "/dev/mtd2" 2>/dev/null 
 +dd if=/tmp/ApplicationData/boot/bootconfig_new.bin 2>/dev/null | mtd -e "/dev/mtd3" write - "/dev/mtd3" 2>/dev/null 
 +echo 0 > /proc/mtd_writeable 
 +sync 
 +</code></WRAP></tabbox>
  
-1. Get script from [[https://github.com/itorK/nbg7815_tools/blob/main/change_boot_partition.sh]] +:!: For reference: [[https://github.com/openwrt/openwrt/commit/5dee5965012e788f06e4d095e8cfb73200d818cb|initial commit nbg7815]]\\ 
 +\\
  
-2. Run script  +===== Back to OEM firmware =====
  
-    sh change_boot_partition.sh+OpenWrt is currently not using the dual partition layout writing the opposite/not active kernel/rootfs partitions during upgradeSo we can easy go back to OEM firmware by just setting the active kernel and rootfs partitions [[#Back to OEM firmware (1)|Back to OEM firmware (1)]]. In case this changes in future or you have flashed the other partitions as well you can flash the OEM firmware with proper rootfs and kernel image too [[#Back to OEM firmware (2)|Back to OEM firmware (2)]]. Another option would be using the [[#TFTP flash OEM firmware|TFTP flash OEM firmware]] process from section [[#Debricking|Debricking]].\\  
 +\\
  
 +==== Back to OEM firmware (1) ====
  
-**Hard debricking from U-boot with Serial Access:**+Be carefull with this process. :!: **Do not power off the device during the process!**
  
 +  - Login via SSH to the router.
 +  - To use this method it is required to install kmod-mtd-rw first: ''**opkg update && opkg install kmod-mtd-rw**''.
 +  - Change directory to /tmp.
 +  - Copy & paste the code from script ''**Step 4**'' below.
 +  - Execute the script with ''**sh change_boot_partition.sh**''.
 +  - Reboot the device.
 +  - After reboot force a reflash of OEM firmware via WebGui using one of the provided [[#OEM firmware| OEM firmware files]] to purge OpenWrt entirely.
  
-1Get orginal firmware [[https://d3jal3boi407dg.cloudfront.net/mycloud/nbg7815/latest_firmware_info/s3_file/1634698613953/V1.00(ABSK.7)C0.bin|V1.00(ABSK.7)C0.bin]]+<tabbox Step 4><WRAP><code> 
 +cat <<'EOF' > /tmp/change_boot_partition.sh 
 +# Script to changing active boot partitions  
 +# Author: Karol Przybylski <itor@o2.pl> 
 +# Orginal script: https://github.com/itorK/nbg7815_tools/blob/main/change_boot_partition.sh // It lacks the insmod mtd-rw i_want_a_brick=1
  
-2. Setup your laptop to 192.168.1.99+openwrt_type=$(cat /etc/openwrt_release|grep DISTRIB_TARGET|cut -f -d "'")
  
-3. install and configure TFTP server, connect your laptop by cable, turn off windows firewall+if [ ${openwrt_type} == "ipq807x/generic" ]; then 
 +  echo "OpenWrt release" 
 +  boot_part=$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd2|cut -f 1 -d "|"|head -n1)
  
-4Interrupt autoboot and execute command (no need unlock):+  dd if=/dev/mtd2 of=boot.bin bs=336 count=1
  
-    NBG7815> ATUR V1.00(ABSK.7)C0.bin+  if [ ${boot_part} -eq 0 ]; then 
 +    printf '\x01' | dd of=boot.bin bs=1 seek=168 count=1 conv=notrunc 
 +  else 
 +    printf '\x00' | dd of=boot.bin bs=1 seek=168 count=1 conv=notrunc
  
 +  fi
 +  insmod mtd-rw i_want_a_brick=1
 +  mtd write boot.bin /dev/mtd2
 +  mtd write boot.bin /dev/mtd3
 +fi
  
-/*** if info available: uncomment and fill in +if [ ${openwrt_type} == "ipq/ipq807x_64" ]; then 
-===== Basic configuration ===== +  echo "Original Zyxel Firmware" 
-After flashing, proceed with [[docs:guide-user:base-system:start|Basic configuration]]: Set up your Internet connection, configure wireless, configure USB port, etc+  primaryboot_hlos=$(cat /proc/boot_info/0:HLOS/primaryboot) 
-***/+  if $primaryboot_hlos -eq 0 ]; then 
 +       echo 1 > /proc/boot_info/0:HLOS/primaryboot 
 +  else 
 +       echo 0 > /proc/boot_info/0:HLOS/primaryboot 
 +  fi 
 +   
 +  mkdir /tmp/ApplicationData/boot 
 +  cat /proc/boot_info/getbinary_bootconfig > /tmp/ApplicationData/boot/bootconfig_new.bin 
 +  echo 1 > /proc/mtd_writeable 
 +  dd if=/tmp/ApplicationData/boot/bootconfig_new.bin 2>/dev/null mtd -e "/dev/mtd2" write - "/dev/mtd2" 2>/dev/null 
 +  dd if=/tmp/ApplicationData/boot/bootconfig_new.bin 2>/dev/null | mtd -e "/dev/mtd3" write - "/dev/mtd3" 2>/dev/null 
 +  echo 0 > /proc/mtd_writeable 
 +  sync 
 +fi 
 +EOF 
 +</code></WRAP></tabbox> 
 +\\
  
 +==== Back to OEM firmware (2) ====
  
-/*** if info available: uncomment and fill in +:!: Be carefull with this process. Make sure you write the correct images to the correct partitions! **Do not power off the device during the process!**
-===== Specific configuration =====+
  
-<WRAP BOX 600px> +  - Download OEM firmware: [[#OEM firmware|see below]] 
-FIXME Please fill in real values for this devicethen remove the EXAMPLEs and the WRAP that encloses this text.+  - Extract rootfs and kernel. Already extracted v8: [[https://mega.nz/file/Q1wWEBoL#W7LaCnTeFMCOaxP_TX65yGD2h13BmYGbJQ0xe5m2qYo|kernel]][[https://mega.nz/file/Uh4gQRqa#QEEDJ5k1tFU4zBn9yGAEHqBmWDu6S9fMF4rQxXXv_MA|rootfs]] 
 +  - Login via SSH to the router. 
 +  - To use this method it is required to install kmod-mtd-rw first: ''**opkg update && opkg install kmod-mtd-rw**'' 
 +  - Copy the files to the router to /tmp (e. g. using scp or an usb drive). Rename them to ''**kernel**'' resp. ''**rootfs**''
 +  - Flash the kernel and rootfs to the currently not active partitions. Copy & paste the code from and execute the script with ''**sh flash_kernel_rootfs.sh**''.. 
 +  - Copy & paste the code from [[#Back to OEM firmware (1)|script Step 4]] from [[#Back to OEM firmware (1)|Back to OEM firmware (1)]] and execute the script with ''**sh change_boot_partition.sh**''
 +  - Reboot the device. 
 +  - After reboot force a reflash of OEM firmware via WebGui using one of the provided [[#OEM firmware| OEM firmware files]] to purge OpenWrt entirely.
  
-==== Network interfaces ==== +<tabbox Step 6><WRAP><code
-The default network configuration is: +cat <<'EOF'/tmp/flash_kernel_rootfs.sh 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ +# check files
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | +
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | +
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | +
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | +
-</WRAP> +
-***/+
  
 +if [ ! -f "/tmp/rootfs" ]; then
 +     echo "rootfs image"
 +     exit 1
 +fi
  
-/*** if info available: uncomment and fill in +if [ -f "/tmp/kernel" ]; then 
-==== Buttons ==== +     echo "kernel image" 
--> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). +     exit 1 
-Here, we merely name the buttons, so we can use them in the above Howto.+fi
  
-<WRAP BOX 600px> +# get bootconfig
-FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text.+
  
-The ZyXEL NBG7815 (Armor G5) has the following buttons:+mtd_part=$(grep -i "\"0:bootconfig"\" /proc/mtd | awk -F: '{print $1}'
 +bootconfig=$(hexdump -v -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/"$mtd_part" | cut -f 1 -d "|" | head -n1)
  
-^ BUTTON                       ^ Event   ^ +# write rootfs and kernel; mmcblk0p3=0/mmcblk0p4=0 mmcblk0p7=1/mmcblk0p8=1
-| EXAMPLE Reset                |  reset  | +
-| EXAMPLE Secure Easy Setup    |   ses   | +
-| EXAMPLE No buttons at all.      -    | +
-</WRAP> +
-***/+
  
 +if [ "${bootconfig}" -eq 1 ]; then
 + dd if=/dev/zero of=/dev/mmcblk0p7
 + dd if=/tmp/kernel of=/dev/mmcblk0p7
 + dd if=/dev/zero of=/dev/mmcblk0p8
 + dd if=/tmp/root of=/dev/mmcblk0p8
 + sync
 +fi
 +if [ "${bootconfig}" -eq 0 ]; then
 + dd if=/dev/zero of=/dev/mmcblk0p3
 + dd if=/tmp/kernel of=/dev/mmcblk0p3
 + dd if=/dev/zero of=/dev/mmcblk0p4
 + dd if=/tmp/root of=/dev/mmcblk0p4
 + sync
 +fi
 +EOF
 +</code></WRAP></tabbox>\\
  
-===== Hardware ===== +==== OEM firmware ====
-==== Info ==== +
-^ Architecture    | ARMv8                                                                   | +
-^ Vendor          | Qualcomm                                                                | +
-^ Bootloader      | U-Boot                                                                  | +
-^ System-On-Chip  | Qualcomm IPQ8074A                                                       | +
-^ CPU/Speed       | Quad core 2.2 GHz                                                       | +
-^ Flash-Chip      | Kingston EMMC04G-M627 + Winbond W25Q64DW                                | +
-^ Flash size      | 4 GB eMMC + 8 MB NOR                                                    | +
-^ RAM             | 1 GB 2x Nanya NT5CC256M16ER-EK                                          | +
-^ Bluetooth       | CSR8811 using HSUART                                                    | +
-^ Wireless        | QCN5024 bgn+ax                                                          | +
-^ Wireless        | QCN5054 an+ac+ax                                                        | +
-^ Ethernet        | 4x 10/100/1000 Mbps + 1x 1/2.5 GbE + 1x 1/2.5/5/10 GbE                  | +
-^ Ethernet        | ETH chip1: IPQ8074A + ETH chip2: QCA8081 + ETH chip3: Aquantia AQR113C +
-^ Switch          | Qualcomm Atheros QCA8075                                                | +
-^ USB             | 1x 3.1 Gen2                                                             | +
-^ Serial          | [[#Serial|Yes]]                                                         |+
  
 +There is no official publicly available ressource to download the firmware files for this cloud managed router. You can retrieve the firmware file by forcing a firmware upgrade and catching the temporary valid random cloudflare link by yourself (this is limited to the latest firmware only). Firmware files version 6-8 were uploaded to mega.nz:
  
-/*** if info available: uncomment and fill in +^ Firmware                                                                                            ^ sha256sum ^ 
-==== Flash Layout ==== +[[https://mega.nz/file/ptRilZZD#aGvqNpfj0mmSB-DEaE1gXEOZhE_k1FGkg6NR-ysn-90|V1.00(ABSK.8)C0.bin]] | ''1213e94cab334a9317ea405d95817255ba8970c3d2cd0fa4f16b92847ff8906c''
-<WRAP BOX> +[[https://mega.nz/file/Ut51UZ4K#C16JLl2Yfw9Cn2cXOxnRvRVmPQIxXxa9YbgTWEMnYXg|V1.00(ABSK.7)C0.bin]] | ''3a6cd0a4a15fa88bfe4e05d77e562ccd6dfb9bc61994d411155d94710192a884''
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).//+| [[https://mega.nz/file/xhJkQZza#JFrYGwjYIK6nY71ldkRGKJtAyCyMObxc2jgX_a7NTK4|V1.00(ABSK.6)C0.bin]] | ''96e1e992552883e2a720e443f0ee5d31ba9b12bdd231786daed7d8425483e0f4'' |
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.+To get the rootfs and kernel image you have to extract them from the firmware file: rootfs=openwrt-ipq-ipq807x_64-squashfs-root.img, kernel=openwrt-ipq-ipq807x_64-qcom-ipq807x-zyxel-fit-uImage.itb.padded. To do so you would need a Linux machine with u-boot tools installed using dumpimage. Extracted rootfs and kernel for v8:
  
-I couldn't manage to add mtd table as referenced above but here it is. I hope it helps. +^ Firmware                                                                                  ^ sha256sum ^ 
-0x000000000000-0x000000050000 "0:SBL1" +| [[https://mega.nz/file/Q1wWEBoL#W7LaCnTeFMCOaxP_TX65yGD2h13BmYGbJQ0xe5m2qYo|kernel_v8]] | ''9661a36422f357b3072ff5d1dd4e43c89410d8dd2267b343ca2e7f2cc608f6d3'' | 
-0x000000050000-0x000000060000 "0:MIBIB" +| [[https://mega.nz/file/Uh4gQRqa#QEEDJ5k1tFU4zBn9yGAEHqBmWDu6S9fMF4rQxXXv_MA|rootfs_v8]] | ''cff590a82bb30ddced01e1d6514083519471aa4ca36e99a22d6fa74824075398'' | 
-0x000000060000-0x000000080000 : "0:BOOTCONFIG" +\\
-0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1" +
-0x0000000a0000-0x000000220000 : "0:QSEE" +
-0x000000220000-0x0000003a0000 : "0:QSEE_1" +
-0x0000003a0000-0x0000003b0000 : "0:DEVCFG" +
-0x0000003b0000-0x0000003c0000 : "0:DEVCFG_1" +
-0x0000003c0000-0x0000003d0000 : "0:APDP" +
-0x0000003d0000-0x0000003e0000 : "0:APDP_1" +
-0x0000003e0000-0x000000420000 : "0:RPM" +
-0x000000420000-0x000000460000 : "0:RPM_1" +
-0x000000460000-0x000000470000 : "0:CDT" +
-0x000000470000-0x000000480000 : "0:CDT_1" +
-0x000000480000-0x000000540000 : "0:APPSBL" +
-0x000000540000-0x000000600000 : "0:APPSBL_1" +
-0x000000600000-0x000000610000 : "0:APPSBLENV" +
-0x000000610000-0x000000650000 : "0:ART" +
-0x000000650000-0x0000006d0000 : "0:ETHPHYFW" +
-0x0000006d0000-0x0000006e0000 : "0:CRT" +
-0x0000006e0000-0x0000006f0000 : "DUAL_FLAG" +
-0x0000006f0000-0x000000800000 : "RESERVED" +
-  +
-</WRAP> +
-***/+
  
 +===== Debricking =====
  
-==== Photos ==== +In case you've lost the access to your device e. g. due to wrong configuration you can try the failsafe mode, a factory reset or a tftp boot/flash to recover your device:
-/* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ +
-/* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ +
-/* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}}                                  */ +
-/* Thanks, your wiki administration - Oct. 2015 */+
  
-**Insert photo of front of the casing**+**Failsafe mode and factory reset** procedures: -> [[:docs:guide-user:troubleshooting:failsafe_and_factory_reset]] 
  
-**Insert photo of back of the casing**+In case neither the **failsafe mode nor a factory reset** does bring back a working unit you can try to recover your device by the following steps:
  
-**Insert photo of backside label** +  - [[#Opening the case|Open the device case.]] 
- +  - Connect to the device via [[#serial|serial]] connection using a terminal application e. g. [[https://www.putty.org|putty]] and an USB to TTL/USB to Serial adapter. 
-**Insert photo of PCB**+  - [[#Bootloader/U-Boot access|Access the device via bootloader.]] 
 +  - [[#TFTP boot OpenWrt|TFTP boot OpenWrt]] to either reinstall or fix a broken installation | [[#TFTP flash OEM firmware|TFTP flash OEM firmware]] to purge OpenWrt. 
 +\\
  
 ==== Opening the case ==== ==== Opening the case ====
  
-<WRAP BOX> +1. Remove the two rubber crosses from the device' bottom side. 
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// +2. Unscrew the two screws appearing after step 1. 
-</WRAP>+3. Remove the socket. 
 +4. After step 3. another four screws appear. Remove them as well. 
 +5. Around the device' case there are six clips* on the bottom case part inside and five on the uppper shell inside. 
 +6Keep the device with bottom side up and pry it up carefully around the case to remove the bottom sideStart at the side where the connectors are lead out. 
 + 
 +*) You will likely break some of them. Especially those on the left or right side. The clips at the front's case are very tight clipped because of the case' shape and the fact that they are four of them
 +\\
  
 ==== Serial ==== ==== Serial ====
--> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. 
  
-How to connect to the Serial Port of this specific device:\\+General information about the serial port and its usage
  
-{{:media:zyxel:nbg7815:armor_g5_3.jpg?400|}}+  * -> [[docs:techref:hardware:port.serial]] 
 +  * -> [[docs:techref:hardware:port.serial|Serial Console]] 
 +  * -> [[docs:techref:hardware:port.serial.cables|Serial Cables]]
  
 +Serial Port connectors of this specific device:
  
-^ Serial connection parameters\\ for ZyXEL NBG7815 (Armor G5) NBG7815 | TTL 115200, 8N1, 3.3V | +{{:media:zyxel:nbg7815:armor_g5_3.jpg?400|}}
-Connect only RX, TX, GND cable to your TTL/FTDI interface+
  
-==== JTAG ==== +| Serial connection parameters | **TTL 115200, 8N1, 3.3V** | 
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG portJTAG cableetc.+:!Connect RXTXGND cable to your USB to TTL/USB to Serial adapter only!\\ 
 +\\
  
-How to connect to the JTAG Port of this specific device:\\ +==== Bootloader/U-Boot access ====
-**Insert photo of PCB with markings for JTAG port**+
  
-===== Bootlogs ===== +  Connect the USB-to-serial adapter to the router and PC. Open up a serial console program. 
-==== U-Boot ==== +  - Reboot the device and interrupt autoboot by pressing any key. You will end up with a shell prompt: ''**NBG7815>**''\\ \\ <code>
-<WRAP bootlog> +
-<nowiki>+
 Zyxel zloader v1.0.0 (2020-01-06 - 08:24) Zyxel zloader v1.0.0 (2020-01-06 - 08:24)
- 
  
 Multiboot clinent version: 2.0 Multiboot clinent version: 2.0
Line 248: Line 381:
 Ethernet interface failed to initialized! Ethernet interface failed to initialized!
  
-Hit any key to stop autoboot: +**Hit any key to stop autoboot:  3** 
-NBG7815> ATHE +
-ATEN    x[,y]     set BootExtension Debug Flag (y=password) +
-ATSE    x         show the seed of password generator +
-ATSH              dump manufacturer related data in ROM +
-ATRT    [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) +
-ATGO              boot up whole system +
-ATUR    x         upgrade RAS image (filename) +
-ATUS    x         upgrade image by fit script (filename)+
 NBG7815> NBG7815>
-</nowiki+</code> 
-</WRAP>\\+  - To get access to the bootloader you first need a seed/passcode. You will obtain it by typing ''**ATSE NBG7815**'' into the console prompt:\\ \\ <code> 
 +NBG7815> ATSE NBG7815 
 +NBG7815> 013D72FF0710 
 +</code''**013D72FF0710**'' is the resulting seed/passcode :!: This seed/passcode is always different for each boot -> You have to do the same procedure on every reboot to access u-boot!\\  
 +  - Generate the password:\\ \\ :!: **Do not enter the code below it into the current shell!** We have to open a new terminal application. We have distinguish here between Windows and Linux users!\\ \\ **__Linux__**: Copy and paste the code from below into a **newly** opened terminal. First use **calc script** and then **generate password** executing the script using the seed/passcode generated in section 3.\\ \\ **__Windows__** you can use [[https://mega.nz/file/sgZnnYoT#WYuFCmvTETYVr6j8vIZuVHC9rWVykBIBXOOWB3MFhfs|ZynPass]] to calculate the password.\\ \\ <tabbox calc script> 
 +<code> 
 +cat <<'EOF' > tool.sh 
 +ror32() { 
 +  echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) 
 +
 +v="0x$1" 
 +a="0x${v:2:6}" 
 +b=$(( $a + 0x10F0A563)) 
 +c=$(( 0x${v:12:14} & 7 )) 
 +p=$(( $(ror32 $b $c) ^ $a )) 
 +printf "ATEN 1,%X\n" $p 
 +EOF 
 +</code> 
 +<tabbox password> 
 +<code> 
 +sh tool.sh 013D72FF0710 
 +</code></tabbox> The resulting password looks like: ''**ATEN 1,10F0A563**'' 
 +  - Put the output from paragraph 4. in the terminal and press enter:\\ \\ <code> 
 +NBG7815> ATEN 1,10F0A563 
 +</code> 
 +  -  Now Enter ''ATGU'' for full u-boot access. You will end up with a new prompt: ''**ZYXEL#**''\\ \\ <code> 
 +NBG7815> ATGU
  
-==== Fail Safe ====+ZYXEL# 
 +</code> 
 +\\ 
  
-<WRAP bootlog> +==== TFTP boot OpenWrt ====
-<nowiki> +
-BusyBox v1.25.1 (2021-09-29 08:20:53 UTC) built-in shell (ash)+
  
-ash: can't access tty; job control turned off +  - Download **[[#OpenWrt Firmware|OpenWrt Firmware/Other images (factory, initramfs)]]** choosing an itb firmware file. 
-  _______                     ________        __ +  - Setup your PC/Workstation assigning the static IP 192.168.1.99. 
-       |.-----.-----.-----. |  |  |.----.|  |_ +  - Install and configure TFTP serverYour router's u-boot environment is acting as client. -> [[:docs:guide-user:troubleshooting:tftpserver]]. Put the firmware file downloaded in the tftp download directory and make sure the firewall is turned off or configured properly (port 69/udp has to be open)
- |     ||  _  |  -__|     ||  |  |  ||   _||   _| +  - Connect your PC/Workstation via LAN cable to the router. 
- |_______||   __|_____|__|__||________||__|  |____| +  - Power up your router and get access to [[#Bootloader/U-Boot access|u-boot]] as describe above. Step 1-6 reaching ''ZYXEL#'' prompt. 
-          |__| W I R E L E S S   F R E E D O M +  Enter ''tftpboot'' and the name of firmware file e. g. ''openwrt-qualcommax-ipq807x-zyxel_nbg7815-initramfs-uImage.itb'': <code>ZYXEL# tftpboot openwrt-qualcommax-ipq807x-zyxel_nbg7815-initramfs-uImage.itb</code> 
- ----------------------------------------------------- +  After the file is uploaded (this takes a while) you may proceed with entering ''bootm'' into the shell: <code>ZYXEL# bootm</code> 
- (eb4b1a4+r49254)+  If OpenWrt is up you can try to fix your issues. E. g. fixing wrong config preventing booting the device, reinstall OpenWrt using sysupgrade, reinstall OpenWrt as described [[#Installing OpenWrt|here]] or install OEM firmware like [[#Back to OEM firmware|here]]. 
 +\\ 
  
-================= FAILSAFE MODE active ================ +==== TFTP flash OEM firmware ====
-special commands: +
-* firstboot          reset settings to factory defaults +
-* mount_root     mount root-partition with config files+
  
-after mount_root: +  - Download the **[[#OEM firmware|OEM firmware]]**. 
-passwd                         change root'password +  - Setup your PC/Workstation assigning the static IP 192.168.1.99. 
-/etc/config               directory with config files+  - Install and configure TFTP server. Your router'u-boot environment is acting as client. -> [[:docs:guide-user:troubleshooting:tftpserver]]. Put the firmware file downloaded in the tftp download directory and make sure the firewall is turned off or configured properly (port 69/udp has to be open). 
 +  - Connect your PC/Workstation via LAN cable to the router. 
 +  - Power up your router and get access to [[#Bootloader/U-Boot access|u-boot]] as describe above. Step 1-2 is enough (no need unlock). 
 +  - Enter ''ATUR'' and the name of the downloaded firmware file e. g. ''ATUR V1.00(ABSK.8)C0.bin'': <code>NBG7815> ATUR V1.00(ABSK.8)C0.bin</code> :!: **Do not power off the device during the process!**\\ 
  
-for more help see: +===== Photos =====
-http://wiki.openwrt.org/doc/howto/generic.failsafe +
-=======================================================+
  
-root@(none):/# +{{media:zyxel:zyxel_nbg7815_pcb_1_.jpg?250|Zyxel NBG7815 (Armor G5PCB (1)}} {{media:zyxel:zyxel_nbg7815_pcb_2.jpg?250|Zyxel NBG7815 (Armor G5) PCB (2)}}\\ 
-root@(none):/etc# cat openwrt_release +\\ 
-DISTRIB_ID='OpenWrt' + 
-DISTRIB_RELEASE='Chaos Calmer' +===== Flash-/Partition-Layout ===== 
-DISTRIB_REVISION='eb4b1a4+r49254' + 
-DISTRIB_CODENAME='chaos_calmer' +<tabbox 8MB SPI NOR><WRAP><code> 
-DISTRIB_TARGET='ipq/ipq807x_64' +spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 
-DISTRIB_DESCRIPTION='OpenWrt Chaos Calmer 15.05.1' +m25p80 spi32766.0: found w25q64dw, expected n25q128a11 
-DISTRIB_TAINTS='no-all busybox' +m25p80 spi32766.0: w25q64dw (8192 Kbytes) 
-</nowiki> +22 ofpart partitions found on MTD device spi32766.0 
-</WRAP>\\ +Creating 22 MTD partitions on "spi32766.0": 
-==== OEM bootlog ==== + 
-<WRAP bootlog> +0x000000000000-0x000000050000 : "0:SBL1" 
-<nowiki>Format: Log Type - Time(microsec) - Message - Optional Info+0x000000050000-0x000000060000 : "0:MIBIB" 
 +0x000000060000-0x000000080000 : "0:BOOTCONFIG" 
 +0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1" 
 +0x0000000a0000-0x000000220000 : "0:QSEE" 
 +0x000000220000-0x0000003a0000 : "0:QSEE_1" 
 +0x0000003a0000-0x0000003b0000 : "0:DEVCFG" 
 +0x0000003b0000-0x0000003c0000 : "0:DEVCFG_1" 
 +0x0000003c0000-0x0000003d0000 : "0:APDP" 
 +0x0000003d0000-0x0000003e0000 : "0:APDP_1" 
 +0x0000003e0000-0x000000420000 : "0:RPM" 
 +0x000000420000-0x000000460000 : "0:RPM_1" 
 +0x000000460000-0x000000470000 : "0:CDT" 
 +0x000000470000-0x000000480000 : "0:CDT_1" 
 +0x000000480000-0x000000540000 : "0:APPSBL" 
 +0x000000540000-0x000000600000 : "0:APPSBL_1" 
 +0x000000600000-0x000000610000 : "0:APPSBLENV" 
 +0x000000610000-0x000000650000 : "0:ART" 
 +0x000000650000-0x0000006d0000 : "0:ETHPHYFW" 
 +0x0000006d0000-0x0000006e0000 : "0:CRT" 
 +0x0000006e0000-0x0000006f0000 : "DUAL_FLAG" 
 +0x0000006f0000-0x000000800000 : "RESERVED" 
 + 
 +cat /proc/mtd 
 + 
 +dev:    size   erasesize  name 
 +mtd0: 00050000 00010000 "0:sbl1" 
 +mtd1: 00010000 00010000 "0:mibib" 
 +mtd2: 00020000 00010000 "0:bootconfig" 
 +mtd3: 00020000 00010000 "0:bootconfig1" 
 +mtd4: 00180000 00010000 "0:qsee" 
 +mtd5: 00180000 00010000 "0:qsee_1" 
 +mtd6: 00010000 00010000 "0:devcfg" 
 +mtd7: 00010000 00010000 "0:devcfg_1" 
 +mtd8: 00010000 00010000 "0:apdp" 
 +mtd9: 00010000 00010000 "0:apdp_1" 
 +mtd10: 00040000 00010000 "0:rpm" 
 +mtd11: 00040000 00010000 "0:rpm_1" 
 +mtd12: 00010000 00010000 "0:cdt" 
 +mtd13: 00010000 00010000 "0:cdt_1" 
 +mtd14: 000c0000 00010000 "0:appsbl" 
 +mtd15: 000c0000 00010000 "0:appsbl_1" 
 +mtd16: 00010000 00010000 "0:appsblenv" 
 +mtd17: 00040000 00010000 "0:art" 
 +mtd18: 00080000 00010000 "0:ethphyfw" 
 +mtd19: 00010000 00010000 "0:crt" 
 +mtd20: 00010000 00010000 "dual_flag" 
 +mtd21: 00110000 00010000 "reserved" 
 +</code></WRAP> 
 + 
 +<tabbox 4GB eMMC><WRAP><code> 
 +mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit 
 +Waiting for root device PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a... 
 +mmc0: MAN_BKOPS_EN bit is not set 
 +mmc0: new high speed MMC card at address 0001 
 +mmcblk0: mmc0:0001 M62704 3.53 GiB 
 +mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB 
 +GPT: device [179:4] (rootfs) set to be root filesystem 
 +mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 
 + 
 +sgdisk -p /dev/mmcblk0 
 + 
 +Disk /dev/mmcblk0: 7405568 sectors, 3.5 GiB 
 +Sector size (logical/physical): 512/512 bytes 
 +Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20 
 +Partition table holds up to 12 entries 
 +Main partition table begins at sector 2 and ends at sector 4 
 +First usable sector is 34, last usable sector is 7405534 
 +Partitions will be aligned on 2-sector boundaries 
 +Total free space is 282557 sectors (138.0 MiB) 
 + 
 +Number  Start (sector)    End (sector)  Size       Code  Name 
 +                34           16417   8.0 MiB     FFFF  rootfs_data 
 +             16418           18465   1024.0 KiB  FFFF  header 
 +             18466           30753   6.0 MiB     FFFF  0:HLOS 
 +             30754          153633   60.0 MiB    FFFF  rootfs 
 +            153634          161825   4.0 MiB     FFFF  0:WIFIFW 
 +            161826          163873   1024.0 KiB  FFFF  header_1 
 +            163874          176161   6.0 MiB     FFFF  0:HLOS_1 
 +            176162          299041   60.0 MiB    FFFF  rootfs_1 
 +            299042          307233   4.0 MiB     FFFF  0:WIFIFW_1 
 +  10          307234         1355809   512.0 MiB   FFFF  nbg 
 +  11         1355810         7122977   2.8 GiB     FFFF  appdata 
 +</code></WRAP></tabbox>\\ 
 +\\ 
 + 
 +===== Bootlogs ===== 
 + 
 +<tabbox Pre-Boot/SBL1><WRAP><code> 
 +Format: Log Type - Time(microsec) - Message - Optional Info
 Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
 S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147 S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147
Line 366: Line 605:
 S - DDR Frequency, 466 MHz S - DDR Frequency, 466 MHz
 S - Core 0 Frequency, 1651 MHz S - Core 0 Frequency, 1651 MHz
 +</code></WRAP>
  
 +<tabbox U-Boot><WRAP><code>
 U-Boot 2016.01 (Jan 06 2020 - 08:24:12 +0000) U-Boot 2016.01 (Jan 06 2020 - 08:24:12 +0000)
  
Line 390: Line 630:
 Setting bus to 0 Setting bus to 0
 Valid chip addresses: 40 Valid chip addresses: 40
-Net:   MAC0 addr:bc:cf:4f:ff:18:80+Net:   MAC0 addr:bc:cf:4f:ff:1b:a0
 PHY ID1: 0x4d PHY ID1: 0x4d
 PHY ID2: 0xd0b1 PHY ID2: 0xd0b1
Line 425: Line 665:
    Verifying Checksum ... OK    Verifying Checksum ... OK
    Uncompressing Standalone Program ... OK    Uncompressing Standalone Program ... OK
 +</code></WRAP>
  
 +<tabbox zloader><WRAP><code>
 Zyxel zloader v1.0.0 (2020-01-06 - 08:24) Zyxel zloader v1.0.0 (2020-01-06 - 08:24)
- 
  
 Multiboot clinent version: 2.0 Multiboot clinent version: 2.0
Line 435: Line 675:
 eth0 PHY1 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex
 eth0 PHY2 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex
-eth0 PHY3 Down Speed :10 Half duplex+eth0 PHY3 up Speed :1000 Full duplex
 eth0 PHY4 up Speed :1000 Full duplex eth0 PHY4 up Speed :1000 Full duplex
 10M speed not supported 10M speed not supported
Line 441: Line 681:
  
 Hit any key to stop autoboot:  0ipq807x_eth_halt: done Hit any key to stop autoboot:  0ipq807x_eth_halt: done
- 
  
 *** Booting from system 1 *** *** Booting from system 1 ***
Line 481: Line 720:
    Loading Device Tree to 4a3e9000, end 4a3ffac7 ... OK    Loading Device Tree to 4a3e9000, end 4a3ffac7 ... OK
 Using machid 0x80100f1 from environment Using machid 0x80100f1 from environment
 +</code></WRAP></tabbox>
  
-Starting kernel ... +<tabbox OpenWrt><WRAP><code> 
- +[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
-Jumping to AARCH64 kernel via monitor +[    0.000000] Linux version 6.6.52 (NBG7815@R51600) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r27578+1-23ac1ad951) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Wed Sep 25 06:57:27 2024 
-[    0.000000] Booting Linux on physical CPU 0x0 +[    0.000000] Machine model: Zyxel NBG7815 
-[    0.000000] Initializing cgroup subsys cpuset +[    0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000 
-[    0.000000] Initializing cgroup subsys cpu +[    0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiBnomap non-reusable tzapp@4a400000 
-[    0.000000] Initializing cgroup subsys cpuacct +[    0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000 
-[    0.000000] Linux version 4.4.60 (openwrt@0e6791bdf6c5(gcc version 5.2.(OpenWrt GCC 5.2.0 eb4b1a4+r49254) #1 SMP PREEMPT Wed Sep 29 08:31:14 UTC 2021 +[    0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiBnomap non-reusable sbl@4aa00000 
-[    0.000000] Boot CPUAArch64 Processor [410fd034+[    0.000000] OFreserved mem0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000 
-[    0.000000] Ignoring memory range 0x40000000 0x41000000 +[    0.000000] OFreserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000 
-[    0.000000] efiGetting EFI parameters from FDT+   0.000000OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000 
-[    0.000000] efiUEFI not found+[    0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000 
-[    0.000000] Reserved memory: OVERLAP DETECTED! +[    0.000000] OFreserved mem0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000 
-[    0.000000] wifi_dump@51000000 (0x0000000051000000--0x0000000051600000) overlaps with wigig_dump@51200000 (0x0000000051200000--0x0000000051600000)+[    0.000000] Zone ranges: 
 +[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff] 
 +[    0.000000]   DMA32    empty 
 +[    0.000000]   Normal   empty 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0[mem 0x0000000040000000-0x0000000040ffffff] 
 +[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff] 
 +[    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff] 
 +[    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
 [    0.000000] psci: probing for conduit method from DT. [    0.000000] psci: probing for conduit method from DT.
 [    0.000000] psci: PSCIv1.0 detected in firmware. [    0.000000] psci: PSCIv1.0 detected in firmware.
 [    0.000000] psci: Using standard PSCI v0.2 function IDs [    0.000000] psci: Using standard PSCI v0.2 function IDs
 [    0.000000] psci: MIGRATE_INFO_TYPE not supported. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
-[    0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef52000 s21120 r8192 d32128 u61440+[    0.000000] psci: SMC Calling Convention v1.0 
 +[    0.000000] psci: OSI mode supported. 
 +[    0.000000] psci: [Firmware Bug]: failed to set PC mode: -1 
 +[    0.000000] percpu: Embedded 18 pages/cpu s35240 r8192 d30296 u73728 
 +[    0.000000] pcpu-alloc: s35240 r8192 d30296 u73728 alloc=18*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
 [    0.000000] Detected VIPT I-cache on CPU0 [    0.000000] Detected VIPT I-cache on CPU0
-[    0.000000] CPU featuresenabling workaround for ARM erratum 845719 +[    0.000000] alternativesapplying boot alternatives 
-[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 225288 +[    0.000000] Kernel command line: ttyMSM0,115200n8 root=PARTUUID=1991ff67-765c-8ba9-2885-4ccd1351bfd3 rootwait 
-[    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait swiotlb=1 +[    0.000000] Unknown kernel command line parameters "ttyMSM0,115200n8", will be passed to user space. 
-[    0.000000] PID hash table entries: 4096 (order: 332768 bytes) +[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear
-[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) +[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear
-[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048 
-[    0.000000] software IO TLB [mem 0x7fe0a000-0x7fe4a000] (0MB) mapped at [ffffffc03ee0a000-ffffffc03ee49fff] +[    0.000000] mem auto-initstack:offheap alloc:offheap free:off 
-[    0.000000] Memory887072K/915456K available (5602K kernel code637K rwdata2380K rodata, 232K init, 406K bss, 28384K reserved, 0K cma-reserved) +[    0.000000] software IO TLBSWIOTLB bounce buffer size adjusted to 1MB 
-[    0.000000] Virtual kernel memory layout+[    0.000000] software IO TLBarea num 4
-[    0.000000]     vmalloc 0xffffff8000000000 - 0xffffffbdbfff0000     246 GB) +[    0.000000] software IO TLBmapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB
-[    0.000000]     vmemmap 0xffffffbdc0000000 - 0xffffffbfc0000000       8 GB maximum) +[    0.000000] Memory885584K/1048576K available (8256K kernel code, 892K rwdata, 2504K rodata, 1536K init, 276K bss, 162992K reserved, 0K cma-reserved)
-[    0.000000]               0xffffffbdc0040000 - 0xffffffbdc1000000      15 MB actual) +
-[    0.000000]     fixed   0xffffffbffa7fd000 - 0xffffffbffac00000    4108 KB) +
-   0.000000]     PCI I/O : 0xffffffbffae00000 0xffffffbffbe00000      16 MB) +
-[    0.000000    modules : 0xffffffbffc000000 - 0xffffffc000000000      64 MB+
-[    0.000000]     memory  0xffffffc000000000 - 0xffffffc03f000000    1008 MB) +
-[    0.000000]       .init : 0xffffffc00084e000 0xffffffc000888000     232 KB) +
-[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc00084da14    7991 KB) +
-[    0.000000]       .data : 0xffffffc000898000 - 0xffffffc000937400     637 KB)+
 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
-[    0.000000] Preemptible hierarchical RCU implementation. +[    0.000000] rcu: Hierarchical RCU implementation. 
-[    0.000000]  Build-time adjustment of leaf fanout to 64+[    0.000000]  Tracing variant of Tasks RCU enabled. 
-[    0.000000] NR_IRQS:64 nr_irqs:64 0 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies
-[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).+[    0.000000] NR_IRQS: 64nr_irqs: 64, preallocated irqs: 
 +[    0.000000] Root IRQ handler: gic_handle_irq 
 +[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] 
 +[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. 
 +[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
 [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
-[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns +[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns 
-[    0.000476] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) +[    0.000109] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 
-[    0.000487] pid_max: default: 32768 minimum: 301 +[    0.000122] pid_max: default: 32768 minimum: 301 
-[    0.000582] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) +[    0.005263] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear
-[    0.000592] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) +[    0.005277] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear
-[    0.001145Initializing cgroup subsys io +[    0.009608RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1
-[    0.001161] Initializing cgroup subsys memory +[    0.009840rcu: Hierarchical SRCU implementation
-[    0.001187Initializing cgroup subsys devices +[    0.009845rcu:     Max phase no-delay instances is 1000
-[    0.001198] Initializing cgroup subsys freezer +[    0.010763smp: Bringing up secondary CPUs ... 
-[    0.001208Initializing cgroup subsys net_cls +[    0.011444] Detected VIPT I-cache on CPU1 
-[    0.001217] Initializing cgroup subsys pids +[    0.011550] CPU1: Booted secondary processor 0x0000000001 [0x410fd034
-[    0.001464EFI services will not be available. +[    0.012237] Detected VIPT I-cache on CPU2 
-[    0.001484] ASID allocator initialised with 65536 entries +[    0.012309] CPU2: Booted secondary processor 0x0000000002 [0x410fd034
-[    0.052039] MSM Memory Dump base table set up +[    0.012979] Detected VIPT I-cache on CPU3 
-[    0.052060] MSM Memory Dump apps data table set up +[    0.013045] CPU3: Booted secondary processor 0x0000000003 [0x410fd034
-[    0.090116] Detected VIPT I-cache on CPU1 +[    0.013115smp: Brought up 1 node, 4 CPUs 
-[    0.090161] CPU1: Booted secondary processor [410fd034+[    0.013124] SMP: Total of 4 processors activated. 
-[    0.120102] Detected VIPT I-cache on CPU2 +[    0.013129] CPU features: detected: 32-bit EL0 Support 
-[    0.120130] CPU2: Booted secondary processor [410fd034+[    0.013134] CPU features: detected: CRC32 instructions 
-[    0.150131] Detected VIPT I-cache on CPU3 +[    0.013204] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 
-[    0.150157] CPU3: Booted secondary processor [410fd034+[    0.013211] CPU: All CPU(s) started at EL1 
-[    0.150208] Brought up 4 CPUs +[    0.013214] alternatives: applying system-wide alternatives 
-[    0.150233] SMP: Total of 4 processors activated. +[    0.023615] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
-[    0.150243] CPU: All CPU(s) started at EL1 +[    0.023642] futex hash table entries: 1024 (order: 465536 bytes, linear
-[    0.150266] alternatives: patching kernel code +[    0.025435] pinctrl core: initialized pinctrl subsystem 
-[    0.167375] DMI not present or invalid. +[    0.027205] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
-[    0.167631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +[    0.027773DMApreallocated 128 KiB GFP_KERNEL pool for atomic allocations 
-[    0.167655] futex hash table entries: 1024 (order: 5131072 bytes) +[    0.027816DMApreallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
-[    0.168023] pinctrl core: initialized pinctrl subsystem +[    0.027850] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
-[    0.168937] NET: Registered protocol family 16 +[    0.028235thermal_sysRegistered thermal governor 'step_wise' 
-[    0.190062cpuidleusing governor ladder +[    0.028293cpuidleusing governor menu 
-[    0.220080cpuidleusing governor menu +[    0.028483ASID allocator initialised with 65536 entries 
-[    0.220214] vdso: 2 pages (1 code @ ffffffc00089d000, 1 data @ ffffffc00089c000) +[    0.085380qcom,cpr4-apss-regulator b018000.cpr4-ctrlCPR valid fuse count: 4 
-[    0.220246] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[    0.087541Modules29360 pages in range for non-PLT usage 
-[    0.220359] DMA: preallocated 256 KiB pool for atomic allocations +[    0.087548Modules520880 pages in range for PLT usage 
-[    0.220458CPUunavail, SoC Version: 2.0 +[    0.092531SCSI subsystem initialized 
-[    0.220492<CORE> glink_initIPC Logging Disabled +[    0.092726usbcoreregistered new interface driver usbfs 
-[    0.220894IPC logging disabled +[    0.092760usbcoreregistered new interface driver hub 
-[    0.220900IPC logging disabled +[    0.092823usbcore: registered new device driver usb 
-[    0.220905] IPC logging disabled +[    0.093252qcom_scmconvention: smc arm 64 
-[    0.220909] IPC logging disabled +[    0.094980clocksource: Switched to clocksource arch_sys_counter 
-[    0.220913] IPC logging disabled +[    0.098803NETRegistered PF_INET protocol family 
-[    0.223717] Soc version is not 1changing clock offsets +[    0.098969IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) 
-[    0.235153] irqno irq domain found for /soc/smp2p-wcss/slave-kernel ! +[    0.101579tcp_listen_portaddr_hash hash table entries512 (order: 1, 8192 bytes, linear) 
-[    0.237473irqno irq domain found for /soc/smp2p-wcss/slave-kernel ! +[    0.101641Table-perturb hash table entries65536 (order: 6, 262144 bytes, linear) 
-[    0.239712msm_rpm_dev_probeAPSS-RPM communication over GLINK +[    0.101658] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear
-[    0.240835sps:sps is ready. +[    0.101744] TCP bind hash table entries: 8192 (order: 6262144 bytes, linear
-[    0.252172qcom,cpr4-apss-regulator b018000.cpr4-ctrlCPR valid fuse count: 4 +[    0.102019] TCP: Hash tables configured (established 8192 bind 8192) 
-[    0.252479qcom,cpr3-npu-regulator a4000.npu-cprNPU CPR valid fuse count: 2 +[    0.102125] UDP hash table entries: 512 (order: 2, 16384 bytes, linear
-[    0.282047pps_coreLinuxPPS API ver. 1 registered +[    0.102164] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear
-[    0.282054pps_coreSoftware ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> +[    0.102612] NET: Registered PF_UNIX/PF_LOCAL protocol family 
-[    0.282077PTP clock support registered +[    0.102665PCICLS 0 bytesdefault 64 
-[    0.282252dmiFirmware registration failed. +[    0.104346] workingset: timestamp_bits=46 max_order=18 bucket_order=0 
-[    0.283667Advanced Linux Sound Architecture Driver Initialized. +[    0.104946] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
-[    0.284298clocksourceSwitched to clocksource arch_sys_counter +[    0.104954] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
-[    0.287533NETRegistered protocol family 2 +[    0.111672qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator 
-[    0.288156] TCP established hash table entries: 8192 (order: 4, 65536 bytes) +[    0.111843qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator 
-[    0.288264] TCP bind hash table entries: 8192 (order: 5131072 bytes) +[    0.113368qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator 
-[    0.288449] TCP: Hash tables configured (established 8192 bind 8192) +[    0.113511qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator 
-[    0.288504] UDP hash table entries: 512 (order: 2, 16384 bytes) +[    0.115301] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator 
-[    0.288541] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) +[    0.115478qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator 
-[    0.288719] NET: Registered protocol family 1 +[    0.115519qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator 
-[    0.289483hw perfeventsenabled with armv8_pmuv3 PMU driver7 counters available +[    0.115698qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy 
-[    0.297226] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[    0.115941] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator 
-[    0.297446] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. +[    0.116058] qcom-qusb2-phy 79000.physupply vdda-pll not found, using dummy regulator 
-[    0.298010fuse init (API version 7.23) +[    0.116116] qcom-qusb2-phy 79000.physupply vdda-phy-dpdm not found, using dummy regulator 
-[    0.301008] Key type asymmetric registered +[    0.116315] qcom-qusb2-phy 79000.phyRegistered Qcom-QUSB2 phy 
-[    0.301025] Asymmetric key parser 'x509' registered +[    0.126923Serial8250/16550 driver, ports, IRQ sharing disabled 
-[    0.301057] io scheduler noop registered +[    0.128027msm_serial 78b1000.serialmsm_serialdetected port #1 
-[    0.301071] io scheduler deadline registered (default) +[    0.128069msm_serial 78b1000.serialuartclk = 19200000 
-[    0.303473] 20000000.pci supply vdda not found, using dummy regulator +[    0.12840078b1000.serialttyMSM1 at MMIO 0x78b1000 (irq = 20base_baud = 1200000) is a MSM 
-[    0.30352320000000.pci supply vdda_phy not found, using dummy regulator +[    0.128861] msm_serial 78b3000.serial: msm_serial: detected port #0 
-[    0.30358220000000.pci supply vdda_refclk not found, using dummy regulator +[    0.128896] msm_serial 78b3000.serial: uartclk = 3686400 
-[    0.304089PCI host bridge /soc/pci@20000000 ranges: +[    0.129200] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM 
-[    0.304117]    IO 0x20200000..0x202fffff -> 0x20200000 +[    0.129231] msm_serial: console setup on port #0 
-[    0.304131]   MEM 0x20300000..0x20ffffff -> 0x20300000 +[    0.129274printk: console [ttyMSM0] enabled 
-[    1.341300] qcom-pcie 20000000.pci: phy link never came up +[    0.974818] msm_serial: driver initialized 
-[    1.342841] qcom-pcie 20000000.pcihostinit failed +[    0.984110loop: module loaded 
-[    1.342851] qcom-pcie 20000000.pci: cannot initialize host +[    0.985479] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 
-[    1.342996] qcom-pcie: probe of 20000000.pci failed with error -110 +[    0.987134spi-nor spi0.0: w25q64dw (8192 Kbytes) 
-[    1.343173] 10000000.pci supply vdda not found, using dummy regulator +[    0.993718] 22 fixed-partitions partitions found on MTD device spi0.0 
-[    1.34321310000000.pci supply vdda_phy not found, using dummy regulator +[    0.998434] Creating 22 MTD partitions on "spi0.0": 
-[    1.34325110000000.pci supply vdda_refclk not found, using dummy regulator +[    1.004470] 0x000000000000-0x000000050000 : "0:sbl1
-[    1.343688PCI host bridge /soc/pci@10000000 ranges: +[    1.010681] 0x000000050000-0x000000060000 : "0:mibib
-[    1.343710]    IO 0x10200000..0x102fffff -> 0x10200000 +[    1.014910] 0x000000060000-0x000000080000 : "0:bootconfig
-[    1.343724]   MEM 0x10300000..0x10ffffff -> 0x10300000 +[    1.019848] 0x000000080000-0x0000000a0000 : "0:bootconfig1
-[    2.378763] qcom-pcie 10000000.pci: phy link never came up +[    1.025227] 0x0000000a0000-0x000000220000 : "0:qsee
-[    2.380303] qcom-pcie 10000000.pcihostinit failed +[    1.030793] 0x000000220000-0x0000003a0000 : "0:qsee_1
-[    2.380312] qcom-pcie 10000000.pcicannot initialize host +[    1.036102] 0x0000003a0000-0x0000003b0000 : "0:devcfg
-[    2.380424] qcom-pcie: probe of 10000000.pci failed with error -110 +[    1.040784] 0x0000003b0000-0x0000003c0000 : "0:devcfg_1
-[    2.380789] MDSS QPIC HW Base phy_Address=0x7980000 virt=ffffff80004c0000 +[    1.045969] 0x0000003c0000-0x0000003d0000 : "0:apdp
-[    2.381180] mdss_qpic_panel_probePanel Name = qpic lcd panel +[    1.051402] 0x0000003d0000-0x0000003e0000 : "0:apdp_1
-[    2.382426] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully! +[    1.056400] 0x0000003e0000-0x000000420000 : "0:rpm
-[    2.387613NETRegistered protocol family 27 +[    1.061301] 0x000000420000-0x000000460000 : "0:rpm_1
-[    2.387625] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled +[    1.066094] 0x000000460000-0x000000470000 : "0:cdt
-[    2.387638qmi_log_init: IPC Logging disabled +[    1.071252] 0x000000470000-0x000000480000 : "0:cdt_1
-[    2.387643] qmi_log_initIPC Logging disabled +[    1.076022] 0x000000480000-0x000000540000 : "0:appsbl
-[    2.387738] msm_rpm_log_probeOK +[    1.081192] 0x000000540000-0x000000600000 : "0:appsbl_1
-[    2.388381msm-dcc b3000.dccDCC XPU is not specified +[    1.086238] 0x000000600000-0x000000610000 : "0:appsblenv
-[    2.388632msm-dcc b3000.dccDCC SRAM dump setup failed +[    1.091567] 0x000000610000-0x000000650000 : "0:art
-[    2.388655] msm-dcc b3000.dcc: jiffies_64: 0xffff8bbecntvct_64: 0x1a45b389 +[    1.097091] 0x000000650000-0x0000006d0000 : "0:ethphyfw
-[    2.388666] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80003de004) +[    1.102003] 0x0000006d0000-0x0000006e0000 : "0:crt
-[    2.388677] msm-dcc b3000.dcc: gcnt_lo: 0x1a45b53d(0xffffff80003de000) +[    1.107270] 0x0000006e0000-0x0000006f0000 : "dual_flag
-[    2.389292] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set +[    1.111822] 0x0000006f0000-0x000000800000 : "reserved
-[    2.390034] msm_serial 78b3000.serial: msm_serial: detected port #0 +[    1.125622] spmi spmi-0: PMIC arbiter version v2 (0x20010000) 
-[    2.390067] msm_serial 78b3000.serial: uartclk = 3686400 +[    1.178716i2c_dev: i2c /dev entries driver 
-[    2.390101] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM +[    1.186465] sdhci: Secure Digital Host Controller Interface driver 
-[    2.390122] msm_serial: console setup on port #0 +[    1.186507] sdhci: Copyright(c) Pierre Ossman 
-[    3.258517] console [ttyMSM0] enabled +[    1.191541] sdhci-pltfm: SDHCI platform and OF driver helper 
-[    3.263489] msm_serial 78b1000.serial: msm_serial: detected port #1 +[    1.198157] remoteproc remoteproc0: releasing cd00000.q6v5_wcss 
-[    3.266779] msm_serial 78b1000.serial: uartclk = 19200000 +[    1.221409NETRegistered PF_INET6 protocol family 
-[    3.272837] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM +[    1.222629Segment Routing with IPv6 
-[    3.278726] msm_serial: driver initialized +[    1.225535In-situ OAM (IOAM) with IPv6 
-[    3.287216msm_serial_hsl_init: driver initialized +[    1.229069] NET: Registered PF_PACKET protocol family 
-[    3.299856] brd: module loaded +[    1.232758mmc0SDHCI controller on 7824900.mmc [7824900.mmcusing ADMA 64-bit 
-[    3.300534] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 +[    1.233295] 8021q: 802.1Q VLAN Support v1.8 
-[    3.303341] m25p80 spi32766.0: found w25q64dw, expected n25q128a11 +[    1.277063] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
-[    3.309068m25p80 spi32766.0: w25q64dw (8192 Kbytes) +[    1.277387] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 
-[    3.315116] 22 ofpart partitions found on MTD device spi32766.0 +[    1.283192] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 
-[    3.320116] Creating 22 MTD partitions on "spi32766.0": +[    1.289828] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 
-[    3.325890] 0x000000000000-0x000000050000 : "0:SBL1+[    1.291654] mmc0: new HS200 MMC card at address 0001 
-[    3.331737] 0x000000050000-0x000000060000 : "0:MIBIB+[    1.297470] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable 
-[    3.336929] 0x000000060000-0x000000080000 : "0:BOOTCONFIG+[    1.305718] mmcblk0: mmc0:0001 M62704 3.53 GiB 
-[    3.341824] 0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1+[    1.310010] cpr3_mem_acc_init: apc: not using memory accelerator regulator 
-[    3.347232] 0x0000000a0000-0x000000220000 : "0:QSEE+[    1.320325]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 
-[    3.352670] 0x000000220000-0x0000003a0000 : "0:QSEE_1+[    1.323557] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 712000 uV 
-[    3.357905] 0x0000003a0000-0x0000003b0000 : "0:DEVCFG+[    1.332040] mmcblk0boot0: mmc0:0001 M62704 2.00 MiB 
-[    3.362816] 0x0000003b0000-0x0000003c0000 : "0:DEVCFG_1+[    1.335904] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 832000 uV 
-[    3.367968] 0x0000003c0000-0x0000003d0000 : "0:APDP+[    1.346722] mmcblk0boot1: mmc0:0001 M62704 2.00 MiB 
-[    3.373409] 0x0000003d0000-0x0000003e0000 : "0:APDP_1+[    1.350297] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 904000 uV 
-[    3.378381] 0x0000003e0000-0x000000420000 : "0:RPM+[    1.360855] mmcblk0rpmb: mmc0:0001 M62704 512 KiB, chardev (247:0) 
-[    3.383341] 0x000000420000-0x000000460000 : "0:RPM_1+[    1.364973] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 992000 uV 
-[    3.388115] 0x000000460000-0x000000470000 : "0:CDT+[    1.365038] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 701, quot_offset[ 7]=   0 
-[    3.393333] 0x000000470000-0x000000480000 : "0:CDT_1+[    1.391019] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 925, quot_offset[ 7]= 220 
-[    3.398007] 0x000000480000-0x000000540000 : "0:APPSBL+[    1.401869] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1045, quot_offset[ 7]= 120 
-[    3.403182] 0x000000540000-0x000000600000 : "0:APPSBL_1+[    1.412806] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1198, quot_offset[ 7]= 150 
-[    3.408245] 0x000000600000-0x000000610000 : "0:APPSBLENV+[    1.423980] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop 
-[    3.413700] 0x000000610000-0x000000650000 : "0:ART+[    1.427213cpufreqcpufreq_onlineCPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz 
-[    3.419004] 0x000000650000-0x0000006d0000 : "0:ETHPHYFW+[    1.443562remoteproc remoteproc0cd00000.q6v5_wcss is available 
-[    3.423685] 0x0000006d0000-0x0000006e0000 : "0:CRT+[    1.452588clkDisabling unused clocks 
-[    3.429259] 0x0000006e0000-0x0000006f0000 : "DUAL_FLAG+[    1.460759VFSMounted root (squashfs filesystem) readonly on device 179:4. 
-[    3.433888] 0x0000006f0000-0x000000800000 : "RESERVED+[    1.461242Freeing unused kernel memory1536K 
-[    3.439765] spmi spmi-0: PMIC Arb Version-2 (0x20010000) +[    1.467033Run /sbin/init as init process 
-[    3.446577libphyFixed MDIO Bus: probed +[    1.471209  with arguments
-[    3.889787] qca-mdio 90000.mdio: Could not find phy-reset-gpio +[    1.471211    /sbin/init 
-[    3.889895] libphy: qca_mdio: probed +[    1.471212    ttyMSM0,115200n8 
-[    3.896259] qca-mdio 90000.mdio: qca-mdio driver was registered +[    1.471214  with environment
-[    3.898445] Unable to create IPC log context! +[    1.471216    HOME=/ 
-[    3.904190] cnss: Platform driver probed successfully. +[    1.471217    TERM=linux 
-[    3.908689] Skip QCA8074V1 in V2 platform +[    1.557158initConsole is alive 
-[    3.913528] cnss_genl: genl_register_family fail: -17 +[    1.557272init: - watchdog - 
-[    3.917534] cnss: CNSS genl init failed -17 +[    1.920210kmodloaderloading kernel modules from /etc/modules-boot.d/* 
-[    3.922535] cnss: Platform driver probed successfully. +[    1.932607hwmon hwmon0temp1_input not attached to any thermal zone 
-[    3.926763] i2c /dev entries driver +[    1.951844gpio_button_hotplugloading out-of-tree module taints kernel. 
-[    3.941108] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com +[    1.977696ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist 
-[    3.941584] sdhci: Secure Digital Host Controller Interface driver +[    2.037636aquantia_phy_api_ops_init[1485]:INFO:qca probe aquantia phy driver succeeded! 
-[    3.948679] sdhci: Copyright(c) Pierre Ossman +[    3.915064] regi_init[2525]:INFO:Initializing HPPE Done!! 
-[    3.954625] sdhci-pltfm: SDHCI platform and OF driver helper +[    3.915191] regi_init[2574]:INFO:qca-ssdk module init succeeded! 
-[    3.959540] qcom_ice_get_pdevice: invalid device list +[    3.921679EDMA ver 1 hw init 
-[    3.964774] sdhci_msm 7824900.sdhci: sdhci_msm_ice_get_dev: ICE device not probed yet +[    3.925779EDMA HW Reset completed succesfully 
-[    3.969709] sdhci_msm 7824900.sdhci: sdhci_msm_probe: required ICE device not probed yet err = -517 +[    3.928423Num rings TxDesc:1 (23-23) TxCmpl:1 (7-7) 
-[    3.994455] lp5569x 0-0032: lp5569 Programmable led chip found +[    3.932818RxDesc:1 (15-15) RxFill:1 (7-7) 
-[    4.016273] lp5569x 0-0035: lp5569 Programmable led chip found +[    3.938501dp1ppe offload disabled0 for macid 1 
-[    4.018554] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed +[    3.942194dp1Switch attached to macid 1 status0 
-[    4.021051] ICE IRQ = 81 +[    4.145766Qualcomm QCA8075 90000.mdio-1:00attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL
-[    4.029805] +[    4.146887dp2ppe offload disabled: 0 for macid 2 
-[    4.029805] Version Rollback Feature Disabled +[    4.154660dp2Switch attached to macid 2 status0 
-[    4.032721] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000 +[    4.235313Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL
-[    4.037683] sps_register_bam_device : unable to create IPC Logging for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000 +[    4.236264dp3ppe offload disabled: 0 for macid 3 
-[    4.054948] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000 +[    4.244207dp3Switch attached to macid 3 status: 0 
-[    4.070856] sps:BAM 0x0000000008b04000 is registered.[    4.078629] DEV CI test message +[    4.325357Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) 
-[    4.083303] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group +[    4.326253dp4ppe offload disabled: 0 for macid 4 
-[    4.086039] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group +[    4.334252dp4Switch attached to macid 4 status: 0 
-[    4.096511] remoteproc remoteproc0: q6v5-m3 is available +[    4.425343Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) 
-[    4.106997] SPMI VADC - Min ch: 0 Max ch: 15 +[    4.426459dp5: ppe offload disabled: 0 for macid 5 
-[    4.113944of_graph_get_next_endpoint()no port node found in /soc/csr@6001000 +[    4.434239dp5: Switch attached to macid 5 status: 0 
-[    4.116405] coresight-csr 6001000.csr: CSR initialized +[    4.537208Qualcomm QCA8081 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL) 
-[    4.123852] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 +[    4.538568dp6-synppe offload disabled: 0 for macid 6 
-[    4.128800] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 +[    4.546116dp6-synSwitch attached to macid 6 status0 
-[    4.136340] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 +[    4.560409Aquantia AQR113C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL) 
-[    4.143705] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 +[    4.561372********************************************************** 
-[    4.151098] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 +[    4.569321* NSS Data Plane driver 
-[    4.158481] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 +[    4.575813] ********************************************************** 
-[    4.165851] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 +[    4.595854] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    4.173232] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 +[    4.595904] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 
-[    4.180612] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 +[    4.600375] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010 
-[    4.187993] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 +[    4.607899] xhci-hcd xhci-hcd.1.auto: irq 42, io mem 0x08a00000 
-[    4.195372] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 +[    4.617282xhci-hcd xhci-hcd.1.autoxHCI Host Controller 
-[    4.202730] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 +[    4.623071xhci-hcd xhci-hcd.1.autonew USB bus registered, assigned bus number 2 
-[    4.210131] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 +[    4.628637] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed 
-[    4.217509] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 +[    4.636562hub 1-0:1.0: USB hub found 
-[    4.224889] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 +[    4.642788] hub 1-0:1.0: 1 port detected 
-[    4.232250] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 +[    4.646782] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    4.239640] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 +[    4.650946] hub 2-0:1.0: USB hub found 
-[    4.247198] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 +[    4.658862] hub 2-0:1.0: 1 port detected 
-[    4.254525] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 +[    4.662651] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller 
-[    4.261927] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 +[    4.666382] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 
-[    4.269370] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 +[    4.671722] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010 
-[    4.276744] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 +[    4.679204] xhci-hcd xhci-hcd.2.auto: irq 43, io mem 0x08c00000 
-[    4.283757] sps_register_bam_device : unable to create IPC Logging for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 +[    4.688641xhci-hcd xhci-hcd.2.autoxHCI Host Controller 
-[    4.300866sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 +[    4.694425xhci-hcd xhci-hcd.2.autonew USB bus registered, assigned bus number 4 
-[    4.316751] sps:BAM 0x0000000006044000 is registered.[    4.324396] coresight-tmc 6028000.tmc: TMC initialized +[    4.699997] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed 
-[    4.329191] coresight-tmc 6027000.tmc: TMC initialized +[    4.707873hub 3-0:1.0: USB hub found 
-[    4.334344] coresight-funnel 6021000.funnel: FUNNEL initialized +[    4.714142] hub 3-0:1.0: 1 port detected 
-[    4.339359] coresight-funnel 6100000.funnel: FUNNEL initialized +[    4.718134] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    4.345196] coresight-funnel 6120000.funnel: FUNNEL initialized +[    4.722442] hub 4-0:1.0: USB hub found 
-[    4.351084] coresight-funnel 61a1000.funnel: FUNNEL initialized +[    4.730040] hub 4-0:1.0: 1 port detected 
-[    4.357579] coresight-etm4x 619c000.etm: ETM 4.0 initialized +[    4.735049kmodloaderdone loading kernel modules from /etc/modules-boot.d/* 
-[    4.363216] coresight-etm4x 619d000.etm: ETM 4.0 initialized +[    4.743898] init: - preinit - 
-[    4.369171] coresight-etm4x 619e000.etm: ETM 4.0 initialized +   5.034985usb 3-1: new high-speed USB device number using xhci-hcd 
-[    4.374855] coresight-etm4x 619f000.etm: ETM 4.0 initialized +[    5.284576hub 3-1:1.0USB hub found 
-[    4.380110] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized +[    5.286279hub 3-1:1.0: 4 ports detected 
-[    4.385859coresight-stm 6002000.stm: STM initialized +[    5.365219usb 4-1new SuperSpeed USB device number 2 using xhci-hcd 
-[    4.394480] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 +[    5.428212hub 4-1:1.0: USB hub found 
-[    4.398260] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized +[    5.428620hub 4-1:1.0: 4 ports detected 
-[    4.409042] Netfilter messages via NETLINK v0.30. +   5.694974usb 3-1.4: new high-speed USB device number 3 using xhci-hcd 
-[    4.413469] nf_conntrack version 0.5.0 (6930 buckets, 27720 max) +   5.945014usb 4-1.2new SuperSpeed USB device number 3 using xhci-hcd 
-[    4.418407] ctnetlink v0.93: registering with nfnetlink. +[   11.644972] random: crng init done 
-[    4.424839] NET: Registered protocol family 10 +[   13.772161loop0detected capacity change from 0 to 122880 
-[    4.430201NETRegistered protocol family 17 +[   13.815007loop0detected capacity change from 122880 to 107008 
-[    4.433702] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. +[   13.816157mount_rootoverlay filesystem in /dev/loop0 has not been formatted yet 
-   4.438153Bridge firewalling registered +[   14.211915EXT4-fs (loop0): mounted filesystem b70c817e-2ac1-4ca7-8800-0c3dfeade3a2 r/w with ordered data modeQuota modedisabled
-[    4.450865] 8021q: 802.1Q VLAN Support v1.8 +[   14.212409mount_root: overlay filesystem has not been fully initialized yet 
-[    4.456283] <CORE> glink_core_register_transport: IPC Logging disabled +[   14.223685mount_rootswitching to ext4 overlay 
-[    4.458865] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 +[   14.233358overlayfsnull uuid detected in lower fs '/'falling back to xino=off,index=off,nfs_export=off. 
-[    4.465377] msm_glink_smem_native_xprt       rx fifo not found +[   14.236169urandom-seedSeed file not found (/etc/urandom.seed
-[    4.472723] pmd9655_s3: supplied by e-smps1-reg +[   14.274921procd: - early - 
-[    4.478312] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 +[   14.275089procd: - watchdog - 
-[    4.482364] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 +[   14.815682procd: - watchdog - 
-[    4.488994] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 +[   14.816299procd: - ubus - 
-[    4.496638] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable +[   14.876443procd: - init - 
-[    4.504137] cpr3_mem_acc_init: apc: not using memory accelerator regulator +[   15.100327kmodloaderloading kernel modules from /etc/modules.d/* 
-[    4.513281] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 720000 uV +[   15.185051hidraw HID events driver (C) Jiri Kosina 
-[    4.520229] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 872000 uV +[   15.194877BluetoothCore ver 2.22 
-[    4.530215] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 944000 uV +[   15.195103NETRegistered PF_BLUETOOTH protocol family 
-[    4.540020] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop=1032000 uV +[   15.197526BluetoothHCI device and connection manager initialized 
-[    4.549890] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 725, quot_offset[ 7]=   0 +[   15.202837BluetoothHCI socket layer initialized 
-[    4.559641] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]=1004, quot_offset[ 7]= 275 +[   15.209179BluetoothL2CAP socket layer initialized 
-[    4.570492] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1117, quot_offset[ 7]= 110 +[   15.213772BluetoothSCO socket layer initialized 
-[    4.581429] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1261, quot_offset[ 7]= 140 +[   15.220838BluetoothBNEP (Ethernet Emulation) ver 1.3 
-[    4.592493] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop +[   15.223655BluetoothBNEP filtersprotocol multicast 
-[    4.603816qcom,cpr3-npu-regulator a4000.npu-cprNPU CPR valid fuse count2 +[   15.229237BluetoothBNEP socket layer initialized 
-[    4.610154pmd9655_s4supplied by e-smps1-reg +[   15.232970urngd: v1.0.2 started
-[    4.617310cpr3_mem_acc_initnpu: not using memory accelerator regulator +[   15.241697usbcore: registered new interface driver btusb 
-[    4.621600npu_cornerfused      NOMopen-loop= 816000 uV +[   15.242963Loading modules backported from Linux version v6.9.9-0-g28fdf4518483 
-[    4.628555npu_cornerfused    TURBO: open-loop= 880000 uV +[   15.248138Backport generated by backports.git v6.1.97-1-29-gf1d24a3683b2 
-[    4.634409npu_corner: fused      NOM: open-loop= 816000 uV +[   15.256945BluetoothHCI UART driver ver 2.3 
-[    4.639999npu_cornerfused    TURBO: open-loop= 880000 uV +[   15.262282BluetoothHCI UART protocol H4 registered 
-[    4.645676npu_corner: Normal and Cold condition init done. Default to normal. +[   15.266727BluetoothHCI UART protocol BCSP registered 
-[    4.652390cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz +[   15.272614BluetoothHIDP (Human Interface Emulation) ver 1.2 
-[    4.658514cpufreqcpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz +[   15.277328BluetoothHIDP socket layer initialized 
-[    4.666191qcom_ice_get_pdevice: found ice device ffffffc03cf08a00 +[   15.289691NETRegistered PF_QIPCRTR protocol family 
-[    4.674317qcom_ice_get_pdevice: matching platform device ffffffc03d575c00 +[   15.292071BluetoothRFCOMM TTY layer initialized 
-[    4.680393sdhci_msm 7824900.sdhciNo vreg data found for vdd +[   15.293734BluetoothRFCOMM socket layer initialized 
-[    4.687321sdhci_msm 7824900.sdhciNo vreg data found for vdd-io +[   15.298538BluetoothRFCOMM ver 1.11 
-[    4.693366qcom_ice 7803000.sdcc1iceQC ICE 2.1.44 device found @0xffffff80008c8000 +[   15.305397hwmon hwmon1temp1_input not attached to any thermal zone 
-[    4.700533sdhci_msm 7824900.sdhciNo vmmc regulator found +[   15.364292PPP generic driver version 2.4.2 
-[    4.707364sdhci_msm 7824900.sdhciNo vqmmc regulator found +[   15.365178NETRegistered PF_PPPOX protocol family 
-[    4.754300mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhciusing ADMA 64-bit +[   15.375998ath11k c000000.wifi: ipq8074 hw2.0 
-[    4.754478DEV CI test message +[   15.376032ath11k c000000.wifiFW memory mode0 
-   4.763373remoteproc remoteproc1q6v5-wcss is available +[   15.406120remoteproc remoteproc0powering up cd00000.q6v5_wcss 
-[    4.766280hctosysunable to open rtc device (rtc0) +[   15.406456remoteproc remoteproc0Booting fw image IPQ8074/q6_fw.mdt, size 668 
-[    4.790720pmd9655_ldo11disabling +[   16.137037remoteproc remoteproc0remote processor cd00000.q6v5_wcss is now up 
-[    4.793222ALSA device list: +[   16.181038ath11k c000000.wifiqmi ignore invalid mem req type 3 
-[    4.793351  No soundcards found. +[   16.188508ath11k c000000.wifichip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff 
-[    4.796499Waiting for root device PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a... +[   16.188544ath11k c000000.wififw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 
-[    4.827921mmc0MAN_BKOPS_EN bit is not set +[   16.478435remoteproc remoteproc0stopped remote processor cd00000.q6v5_wcss 
-[    4.831014] mmc0new high speed MMC card at address 0001 +[   16.478484remoteproc remoteproc0powering up cd00000.q6v5_wcss 
-[    4.831539mmcblk0mmc0:0001 M62704 3.53 GiB +[   16.484812remoteproc remoteproc0Booting fw image IPQ8074/q6_fw.mdt, size 668 
-[    4.836705mmcblk0rpmbmmc0:0001 M62704 partition 3 512 KiB +[   16.834218remoteproc remoteproc0remote processor cd00000.q6v5_wcss is now up 
-[    4.842297GPTdevice [179:4] (rootfsset to be root filesystem +[   16.838076kmodloaderdone loading kernel modules from /etc/modules.d/* 
-[    4.846880 mmcblk0p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 +[   16.878123ath11k c000000.wifiqmi ignore invalid mem req type 3 
-[    4.906245VFSMounted root (squashfs filesystem) readonly on device 179:8. +[   16.885564ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff 
-[    4.906360Freeing unused kernel memory232K (ffffffc00084e000 ffffffc000888000+[   16.885606ath11k c000000.wififw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 
-[    4.912364Freeing alternatives memory44K (ffffffc000888000 - ffffffc000893000) +[   17.273224ath11k c000000.wifihtt event 48 not handled 
-[    5.104844initConsole is alive +[   21.625758br-lanport 1(lan1) entered blocking state 
-[    5.104943init: - watchdog - +[   21.625806br-lanport 1(lan1) entered disabled state 
-[    5.764892usbcoreregistered new interface driver usbfs +[   21.629847nss-dp 3a001000.dp1 lan1entered allmulticast mode 
-[    5.764934usbcoreregistered new interface driver hub +[   21.635354nss-dp 3a001000.dp1 lan1entered promiscuous mode 
-[    5.769313usbcoreregistered new device driver usb +[   21.652939br-lanport 2(lan2) entered blocking state 
-[    5.775887] Button Hotplug driver version 0.4.1 +[   21.652988br-lanport 2(lan2) entered disabled state 
-[    5.782092SCSI subsystem initialized +[   21.657135] nss-dp 3a001200.dp2 lan2: entered allmulticast mode 
-[    5.788422ehci_hcdUSB 2.'Enhanced' Host Controller (EHCI) Driver +[   21.662406] nss-dp 3a001200.dp2 lan2: entered promiscuous mode 
-[    5.788711ehci-platformEHCI generic platform driver +[   21.672480br-lanport 3(lan3) entered blocking state 
-[    5.800944] msm-usb-ssphy-qmp 78000.ssphyInitializing QMP phy +[   21.674003br-lanport 3(lan3entered disabled state 
-[    5.807816msm-usb-ssphy-qmp 78000.ssphyQMP PHY initialization timeout +[   21.679265nss-dp 3a001400.dp3 lan3: entered allmulticast mode 
-[    5.807837msm-usb-ssphy-qmp 78000.ssphyUSB3_PHY_PCS_STATUS:68686868 +[   21.684588nss-dp 3a001400.dp3 lan3entered promiscuous mode 
-[    6.014667msm-usb-ssphy-qmp 58000.ssphyInitializing QMP phy +[   21.695252br-lanport 4(lan4entered blocking state 
-[    6.022067msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout +[   21.696148br-lanport 4(lan4) entered disabled state 
-[    6.022088msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868 +[   21.701313nss-dp 3a001600.dp4 lan4entered allmulticast mode 
-[    6.230190] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[   21.706735nss-dp 3a001600.dp4 lan4entered promiscuous mode 
-[    6.230224] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 +[   21.721744br-lanport 5(10gentered blocking state 
-[    6.234750] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 +[   21.721788br-lanport 5(10g) entered disabled state 
-[    6.242144] xhci-hcd xhci-hcd.0.auto: irq 211, io mem 0x08a00000 +[   21.725913nss-dp 3a007000.dp6-syn 10gentered allmulticast mode 
-[    6.251099hub 1-0:1.0USB hub found +[   21.731544nss-dp 3a007000.dp6-syn 10gentered promiscuous mode 
-[    6.257061hub 1-0:1.01 port detected +[   24.725128nss-dp 3a001000.dp1 lan1PHY Link up speed1000 
-[    6.260743] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[   24.725190br-lanport 1(lan1entered blocking state 
-[    6.264707xhci-hcd xhci-hcd.0.autonew USB bus registered, assigned bus number 2 +[   24.729871br-lanport 1(lan1) entered forwarding state 
-[    6.270003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. +[   24.885253nss-dp 3a001800.dp5 wanPHY Link up speed: 1000 
-[    6.277736] hub 2-0:1.0: USB hub found +[   25.765089nss-dp 3a001000.dp1 lan1PHY Link is down 
-[    6.285871] hub 2-0:1.0: 1 port detected +[   25.765344br-lanport 1(lan1) entered disabled state 
-[    6.289561] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   25.845623nss-dp 3a001600.dp4 lan4PHY Link up speed: 1000 
-[    6.293505] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 +[   25.845671br-lanport 4(lan4) entered blocking state 
-[    6.298923] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 +[   25.850353] br-lan: port 4(lan4) entered forwarding state 
-[    6.306379] xhci-hcd xhci-hcd.1.auto: irq 212, io mem 0x08c00000 +[   27.845141nss-dp 3a001000.dp1 lan1: PHY Link up speed: 1000 
-[    6.315239hub 3-0:1.0USB hub found +[   27.845201br-lanport 1(lan1) entered blocking state 
-[    6.321282hub 3-0:1.01 port detected +[   27.849879br-lanport 1(lan1) entered forwarding state 
-[    6.324948] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +</code></WRAP>
-[    6.328918xhci-hcd xhci-hcd.1.autonew USB bus registered, assigned bus number +
-[    6.334237] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. +
-[    6.341968] hub 4-0:1.0: USB hub found +
-[    6.350106] hub 4-0:1.0: 1 port detected +
-[    6.356103usbcoreregistered new interface driver usb-storage +
-[    6.358188] usbcore: registered new interface driver uas +
-[    7.107575] init: - preinit - +
-Press the [fkey and hit [enter] to enter failsafe mode +
-Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level +
-Before mount_root +
-/dev/mmcblk0p1: recovering journal +
-/dev/mmcblk0p1: 611/2048 files (1.1% non-contiguous), 6380/8192 [    9.405745EXT4-fs (mmcblk0p1)mounted filesystem with ordered data modeOpts(null) +
-[    9.405871randomprocduninitialized urandom read (bytes read, 11 bits of entropy available) +
-[    9.414904mount_rootswitching to jffs2 overlay +
-blocks +
-After mount_root +
-131072+0 records in +
-131072+0 records out +
-131072 bytes (128.0KB) copied, 0.243176 se[    9.683944procd- early - +
-[    9.688011procd: watchdog - +
-conds, 526.4KB/s +
-[   10.283155] procd- ubus - +
-[   11.282554] randomubusd: uninitialized urandom read (bytes read, 27 bits of entropy available) +
-  11.282682random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) +
-[   11.290537] random: ubusd: uninitialized urandom read (bytes read, 27 bits of entropy available) +
-[   11.300263] randomubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) +
-  11.308461random: ubusd: uninitialized urandom read (bytes read, 27 bits of entropy available) +
-[   11.317365] randomubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) +
-[   11.326456] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) +
-[   11.335218procd- init - +
-Please press Enter to activate this console. +
- WIFI FW mount is successful +
-[   13.867932cfg80211: World regulatory domain updated+
-[   13.867957cfg80211 DFS Master region: unset +
-[   13.871953cfg80211:   (start_freq end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) +
-[   13.876580] cfg80211  (2402000 KHz 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) +
-[   13.877554] ntfsdriver 2.1.32 [Flags: R/O MODULE]+
-[   13.878825Initializing XFRM netlink socket +
-[   13.879240NETRegistered protocol family 15 +
-[   13.903529cfg80211  (2457000 KHz - 2482000 KHz @ 20000 KHz92000 KHz AUTO)(N/A2000 mBm), (N/A) +
-[   13.907673cfg80211  (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A+
-[   13.916963cfg80211  (5170000 KHz 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) +
-[   13.924934cfg80211  (5250000 KHz 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) +
-[   13.934656cfg80211  (5490000 KHz 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) +
-[   13.944101cfg80211  (5735000 KHz 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) +
-[   13.952210cfg80211  (57240000 KHz 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) +
-[   13.980317] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1 +
-[   13.984018] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist! +
-[   13.990930] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus +
-[   13.997096] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000 +
-[   14.004209] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000 +
-[   14.011499] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0 +
-[   14.017925] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xf +
-[   14.023477] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xd +
-[   14.029130] ssdk_dt_parse_phy_info[569]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT +
-[   14.034781] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist! +
-[   14.042134] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC bc:cf:4f:ff:18:80 +
-[   14.048051] ssdk_plat_init start +
-[   14.125489] ssdk_ppe_clock_init[464]:INFO:ppe and uniphy clock init successfully! +
-[   14.128625] ssdk_probe[1878]:INFO:ess_rst doesn't exist! +
-[   14.135787HPPE initializing..+
-[   14.137117] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 +
-[   14.140535] <DBG> MALIBU 8075 Found, phytype=2 +
-[   14.148652] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 +
-[   14.153034<DBG> MALIBU 8075 Found, phytype=2 +
-[   14.161326*************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 +
-[   14.165716] <DBG> MALIBU 8075 Found, phytype=2 +
-[   14.173974] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 +
-[   14.178387<DBG> MALIBU 8075 Found, phytype=2 +
-[   14.186651] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd101 +
-[   14.191103] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=31c31c12 +
-[   14.199306] <DBG> AQUANTIA PHY Found, phytype=3 +
-[   14.207895] malibu_phy_api_ops_init[2851]:INFO:qca probe malibu phy driver succeeded! +
-[   14.219353] aquantia_phy_api_ops_init[2180]:INFO:qca probe aquantia phy driver succeeded! +
-[   14.224859] qca808x_phy_api_ops_init[2125]:INFO:qca probe qca808x phy driver succeeded! +
-[   14.233406] qca808x_ptp_register[1377]:INFO:qca808x ptp clock registered +
-[   14.240311] regi_init[3405]:INFO:Initializing HPPE!! +
-[   14.464292] ssdk_ppe_reset_init[738]:INFO:ppe reset successfully! +
-[   14.470193] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96 +
-[   14.473613] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing +
-[   17.374324] ssdk_switch_register[1617]:INFO:Chip version 0x1500 +
-[   17.377302] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist +
-[   17.383542] ssdk_switch_register[1642]:INFO:polling is selected +
-[   17.391267] regi_init[3409]:INFO:Initializing HPPE Done!! +
-[   17.396175] regi_init[3453]:INFO:qca-ssdk module init succeeded! +
-[   17.405332tun: Universal TUN/TAP device driver, 1.6 +
-[   17.405356tun(C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> +
-[   17.411675EDMA ver 1 hw init +
-[   17.415898] EDMA HW Reset completed succesfully +
-[   17.418733] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) +
-[   17.423128] RxDesc:1 (15-15) RxFill:1 (7-7) +
-[   17.429477GMAC2(ffffffc03ab1f880) Invalid MAC@ - using b6:31:46:42:03:1d +
-[   17.433297] GMAC3(ffffffc03a773880) Invalid MAC@ - using fe:69:f5:26:9a:98 +
-[   17.440289GMAC4(ffffffc03a777880) Invalid MAC@ - using b6:8a:29:34:60:60 +
-[   17.447321] GMAC5(ffffffc03aabb880) Invalid MAC@ - using 2a:ca:77:ed:0b:62 +
-[   17.654734GMAC6(ffffffc03aabf880) Invalid MAC@ - using 2a:12:1a:e8:20:03 +
-[   17.655520] ********************************************************** +
-[   17.660493* NSS Data Plane driver +
-[   17.667033] ********************************************************** +
-[   17.676907] l2tp_coreL2TP core driver, V2.0 +
-[   17.677469l2tp_netlink: L2TP netlink interface +
-[   17.776711] nss_driver - fw of size 668348  bytes copied to load addr40000000, nss_id : 0 +
-[   17.778219Supported Frequencies - +
-[   17.783855] 748.8 MHz 1.4976 GHz +
-[   17.789838] 1.6896 GHz [   17.790883] +
-[   17.793309] ffffffbffc651600meminfo init succeed +
-[   17.833300node size 2 # items 4 +
-[   17.833326] memory40000000 1073741824 (avl 935432192) items 4 active_cores 2 +
-[   17.833809] nss_driver fw of size 265248  bytes copied to load addr40800000, nss_id : 1 +
-[   17.834552] Supported Frequencies - +
-[   17.834553] 748.8 MHz +
-[   17.834553] 1.4976 GHz +
-[   17.834554] 1.6896 GHz +
-[   17.834554] +
-[   17.834709] ffffffbffc658700meminfo init succeed +
-[   17.836266] sit: IPv6 over IPv4 tunneling driver +
-[   17.837424nat46module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded+
-[   17.838733greGRE over IPv4 demultiplexor driver +
-[   17.839190ip_greGRE over IPv4 tunneling driver +
-[   17.840280] ip6_gre: GRE over IPv6 tunneling driver +
-[   17.842070Ethernet Channel Bonding Driverv3.7.1 (April 27, 2011) +
-[   17.894806ffffffbffc651600nss core 0 booted successfully +
-[   17.901672node size 2 # items 4 +
-[   17.906856QCA multicast snooping installed successfully +
-[   17.908932] ip6_tables(C) 2000-2006 Netfilter Core Team +
-[   17.915648] memory40000000 1073741824 (avl 935432192) items 4 active_cores 2 +
-[   17.915826] QCA Hy-Fi multicast installation successfully +
-[   17.919942] PPP generic driver version 2.4.2 +
-[   17.921084nss_lag_init[354]:LAG Manager Installed +
-[   17.922040] NETRegistered protocol family 24 +
-[   17.942546ffffffbffc658700nss core booted successfully +
-[   17.951945tntfsmodule license 'Commercial. For support email support@tuxera.com.' taints kernel. +
-[   17.952912Disabling lock debugging due to kernel taint +
-[   17.964852] Tuxera NTFS driver 3021.4.23.8 [FlagsR/W MODULE]. +
-[   17.967279Built against headers 4.4.60 #26 SMP PREEMPT Wed Jul 17 13:35:43 CST 2019 arm64 +
-[   17.972921Running on kernel 4.4.60 #1 SMP PREEMPT Wed Sep 29 08:31:14 UTC 2021 aarch64 +
-[   17.982991<NSS-CRYPTO>:module loaded Build_ID - 09/29/21, 07:31:58 SoC=ipq807x_64 +
-[   17.991320cannot find nss-macsec0 node +
-[   17.997139] cannot find nss-macsec1 node +
-[   18.001265cannot find nss-macsec2 node +
-[   18.005045] nss_macsec init success +
-[   18.012700diagIPC Logging disabled +
-[   18.080857hidrawraw HID events driver (CJiri Kosina +
-[   18.095813u32 classifier +
-[   18.095831]     input device check on +
-[   18.097445    Actions configured +
-[   18.102049] Mirror/redirect action on +
-[   18.113971] pktgenPacket Generator for packet performance testing. Version: 2.75 +
-[   18.126157arp_tables: (C2002 David S. Miller +
-[   18.133628] Bluetooth: Core ver 2.21 +
-[   18.133683NETRegistered protocol family 31 +
-[   18.136403Bluetooth: HCI device and connection manager initialized +
-[   18.140566] BluetoothHCI socket layer initialized +
-[   18.147250Bluetooth: L2CAP socket layer initialized +
-[   18.151702] BluetoothSCO socket layer initialized +
-[   18.157800BluetoothBNEP (Ethernet Emulationver 1.3 +
-[   18.161550BluetoothBNEP filters: protocol multicast +
-[   18.167266Bluetooth: BNEP socket layer initialized +
-[   18.175126] usbcoreregistered new interface driver btusb +
-[   18.181629Ebtables v2.0 registered +
-[   18.183437] BluetoothHCI UART driver ver 2.3 +
-[   18.186324Bluetooth: HCI UART protocol H4 registered +
-[   18.190527] BluetoothHCI UART protocol BCSP registered +
-[   18.195665] BluetoothHCI UART protocol ATH3K registered +
-[   18.202330BluetoothHIDP (Human Interface Emulationver 1.2 +
-[   18.206436BluetoothHIDP socket layer initialized +
-[   18.213434ip_tables: (C) 2000-2006 Netfilter Core Team +
-[   18.219879] l2tp_pppPPPoL2TP kernel driver, V2.0 +
-[   18.298335nf_conntrack_rtsp v0.6.21 loading +
-[   18.406552] nf_nat_rtsp v0.6.21 loading +
-[   18.408954] PPP MPPE Compression module registered +
-[   18.409994] PPTP driver version 0.8.5 +
-[   18.415421] BluetoothRFCOMM TTY layer initialized +
-[   18.417786BluetoothRFCOMM socket layer initialized +
-[   18.422481Bluetooth: RFCOMM ver 1.11 +
-[   18.429716] usbcoreregistered new interface driver usblp +
-[   18.443399xt_timekernel timezone is -0000 +
-[   19.493616Not a bridge device, or device not found: br-lan +
-qcawifi configuration is disable +
-[   20.480277] randomnonblocking pool is initialized +
-[   22.769498configuring additional NSS pbufs +
-[   22.791431] additional pbufs of size 9003008 got added to NSS +
-[   22.808061__mm_init_module +
-[   22.823720] qdf_dbg_mask value is invalid +
-[   22.823741] Using the default module debug levels instead +
-[   22.826819] qdf_print_ctrl_registerAllocated print control object 0 +
-[   22.832154] +
- MINIDUMP VA .bss start=ffffffbffcc23700 module=qdf +
-[   23.070797] wlan[4090:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50 +
-[   23.070873] +
- MINIDUMP VA .bss start=ffffffbffcea4080 module=umac*********initiating cold boot calibration************* +
-*****starting cnssdaemon*****+
  
-[   23.184178] +<tabbox OEM><WRAP><code
-[   23.184178]  MINIDUMP VA .bss start=ffffffbffd047580 module=qca_ol*****cnssdaemon pid=4111********* +Starting kernel ...
-=======ol_if_register_wifi3_0========== +
-[   23.204367] wlan: [4115:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd11bd00 +
-[   23.207007] remoteproc remoteproc0: powering up q6v5-m3 +
-[   23.222681] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284 +
-[   23.223820] Sanity check passed for M3 image +
-[   23.254162] remoteproc remoteproc0: remote processor q6v5-m3 is now up +
-[   23.254242] wlan: [4115:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2 +
-[   23.259705] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done +
-[   23.266790] remoteproc remoteproc1: powering up q6v5-wcss +
-[   23.280341] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668 +
-[   23.280558] Sanity check passed for the image +
-[   23.986112] glink_core_link_up glink is up +
-[   23.986249] glink_xprt_open_event +
-[   23.986328] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled +
-[   23.986440] Subsystem error monitoring/handling services are up +
-[   23.998927] remoteproc remoteproc1: remote processor q6v5-wcss is now up +
-[   24.004616] wlan: [4115:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3 +
-[   24.005427] cnss: QMI WLFW service connected, state: 0x1 +
-[   24.013815] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc87c2c8 +
-[   24.013916] cnss: device_id : 0xfffe mem mode : [0] +
-[   24.110209] cnss: No board_id entry in device tree +
-[   24.114836] cnss: BDF location : 0x000000004b0c0000 +
-[   24.114860] cnss: BDF IPQ8074/bdwlan.bin size 131072 +
-[   24.118981] cnss: BDF download response , result: 0, err: 0x0 +
-[   24.124171] cnss: per device BDF location : 0x000000004b0e0000 +
-[   24.129610] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 +
-[   24.137449] cnss: BDF download response , result: 0, err: 0x0 +
-[   24.234222] wlan: [4115:I:ANY] pld_ahb_wlan_enable: 681: cnss_mode: Cold boot calibration +
-[   24.336268] Coldboot calibration wait started +
-[   24.836314] Coldboot calibration wait ended +
-[   24.944322] wlan: [4115:I:ANY] ol_ath_do_cold_boot_calibration: 467: Coldboot calib successful: radio_id 0x65534 +
-[   24.944347] cnss: QMI WLFW service disconnected, state: 0x7 +
-[   24.954024] wlan: [4115:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0:  (Atheros/multi-bss) +
-[   24.958876] +
- MINIDUMP VA .bss start=ffffffbffd11c180 module=wifi_3_0 +
-[   24.971867] wlan: [4128:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 0 +
-[   24.999664] remoteproc remoteproc1: stopped remote processor q6v5-wcss +
-[   24.999708] wlan: [4128:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 1 +
-[   25.005264] glink_core_link_down glink is down +
-[   25.012298] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done +
-[   25.016845] remoteproc remoteproc0: stopped remote processor q6v5-m3 +
-[   25.054316] glink_xprt_close_event +
-[   25.168455] +
- MINIDUMP VA .bss start=ffffffbffd23a580 module=qca_ol +
-[   25.177050] =======ol_if_register_wifi3_0========== +
-[   25.177083] wlan: [4135:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd30ed00 +
-[   25.180927] remoteproc remoteproc0: powering up q6v5-m3 +
-[   25.193239] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284 +
-[   25.198008] Sanity check passed for M3 image +
-[   25.206323] remoteproc remoteproc0: remote processor q6v5-m3 is now up +
-[   25.209940] wlan: [4135:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2 +
-[   25.216367] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done +
-[   25.223431] remoteproc remoteproc1: powering up q6v5-wcss +
-[   25.229154] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668 +
-[   25.234626] Sanity check passed for the image +
-[   25.590700] glink_core_link_up glink is up +
-[   25.590841] glink_xprt_open_event +
-[   25.593730] Subsystem error monitoring/handling services are up +
-[   25.597094] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled +
-[   25.597112] remoteproc remoteproc1: remote processor q6v5-wcss is now up +
-[   25.597151] wlan: [4135:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3 +
-[   25.725253] cnss: QMI WLFW service connected, state: 0x1 +
-[   25.726267] cnss: device_id : 0xfffe mem mode : [0] +
-[   25.730381] cnss: No board_id entry in device tree +
-[   25.734957] cnss: BDF location : 0x000000004b0c0000 +
-[   25.739159] cnss: BDF IPQ8074/bdwlan.bin size 131072 +
-[   25.744143] cnss: BDF download response , result: 0, err: 0x0 +
-[   25.749355] cnss: per device BDF location : 0x000000004b0e0000 +
-[   25.754810] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 +
-[   25.762622] cnss: BDF download response , result: 0, err: 0x0 +
-[   25.797654] wlan: [4135:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode +
-[   25.806215] wlan: [4135:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 0 created on pipe 4 +
-[   25.806409] wlan: [4135:I:ANY] __ol_ath_attach: 3064: Allocated soc ffffffc036780880 +
-[   25.814523] btcoex_support 0 wlan_prio_gpio 0 +
-[   25.822537] wlan: [4135:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000 +
-[   25.826864] wlan: [4135:I:ANY] osif_nss_wifi_soc_setup: 186: nss-wifili:#1 register wifili function for soc +
-[   25.838390] wlan: [4135:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 3 Target Type 18 +
-[   25.848163] wlan: [4135:I:ANY] __ol_ath_attach: 3278: dev name soc0 +
-[   25.858072] wlan: [4135:I:ANY] ol_ath_soc_attach: 6591: WMI attached. wmi_handle ffffffc0378ac400 +
-[   25.863980] wlan: [4135:I:ANY] htc_wmi_init: 5958: htc_wmi_init() HT Create . ffffffc03669e000 +
-[   25.872965] wlan: [4135:I:ANY] htc_wmi_init: 5965: htc_wmi_init() Skipping BMI Done. +
-[   25.881569] wlan: [4135:I:ANY] htc_wmi_init: 6022: [htc_wmi_init:6022] host_enable 0 nss_nwifi_offload 0 +
-[   25.892525] wlan: [4135:I:ANY] ol_target_init_complete: 6140: CDP soc attach success +
-[   25.898991] wlan: [4135:I:ANY] ol_target_init_complete: 6147: Soc attach success NSS config 0 +
-[   25.906781] wlan: [4135:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc03669e000, ep 2, value 1 +
-[   25.915198] wlan: [4135:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc03669e000, ep 3, value 1 +
-[   25.925957] wlan: [4124:I:TIF] init_deinit_atf_config_enable: 605: Airtime Fairness: num_peers=1058 num_active_peer=0 +
-[   25.935795] wlan: [4124:I:TIF] HE_CAP Info = 1a08010d +
-[   25.946447] wlan: [4124:I:TIF] Num HW modes = 2 +
-[   25.951462] wlan: [4124:I:TIF] Num PHY = 3 +
-[   25.955811] wlan: [4124:I:TIF] Preferred HW Mode = 1 Num Radios = 2 +
-[   25.959978] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, +
-[   25.966147] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1406:  phy_id = 0 wireless modes = f97f9001 +
-[   25.974828] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, +
-[   25.984110] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1406:  phy_id = 1 wireless modes = 680680c +
-[   25.992732] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, +
-[   26.001997] wlan: [4124:I:TIF] init_deinit_add_11ax_modes: 1406:  phy_id = 2 wireless modes = 397f9001 +
-[   26.010714] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 1 +
-[   26.019798] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx:+
-[   26.030124] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs:+
-[   26.039751] wlan: [4124:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 362: Do not allocate DFS object for 2G, pdev_id = 1 +
-[   26.068417] wlan: [4124:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success +
-[   26.083569] wlan: [4124:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success +
-[   26.183932] wlan: [4124:I:ANY] copy_fw_abi_version_tlv: 6258: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 +
-[   26.429688] wlan: [4124:I:ANY] dp_peer_map_attach_wifi3: 9983: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112 +
-[   26.429688] +
-[   26.429896] wlan: [4124:I:ANY] ready_extract_init_status_tlv: 8002: ready_extract_init_status_tlv:+
-[   26.441375] wlan: [4135:I:ANY] ol_ath_connect_htc: 1219: WMI is ready +
-[   26.508365] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 37 is unavailable +
-[   26.508676] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable +
-[   26.516185] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable +
-[   26.524916] wlan: [4135:I:ANY] ol_ath_soc_attach: 6665: connect HTC +
-[   26.533229] wlan: [4135:I:ANY] ol_ath_soc_attach: 6666: bypasswmi : 0 +
-[   26.539398] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable +
-[   26.545994] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable +
-[   26.554503] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable +
-[   26.563016] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable +
-[   26.571604] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable +
-[   26.580201] wlan: [4135:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable +
-[   26.588705] wlan: [4135:I:ANY] ol_ath_soc_attach: 6741: ol_ath_soc_attach() UMAC attach . +
-[   26.597231] wlan: [4135:I:ANY] ath_lowi_if_netlink_init: 177: ath_lowi_if_netlink_init LOWI Netlink successfully created +
-[   26.605559] wlan: [4135:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi0 +
-[   26.616433] wlan: [4135:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target +
-[   26.623420] wlan: [4135:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default +
-[   26.631305] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7206: interface_id 0 +
-[   26.638645] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6895:  phy id = 0 Modes supported +
-[   26.644806] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6902:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 +
-[   26.653264] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6910:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6000 +
-[   26.663397] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = f97f9001 before update +
-[   26.677831] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = f97f9001 after update +
-[   26.687419] wlan: [4135:I:ANY] ol_ath_update_ext_caps: 1842: 11ax 5G supported case +
-[   26.697691] wlan: [4135:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed +
-[   26.704706] ieee80211_cbs_init CBS Inited +
-[   26.714379] wlan: [4135:I:ANY] acfg_attach: 3457: acfg_attach: 3457: Netlink socket created:ffffffc035889800 +
-[   26.715104] wlan: [4135:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX +
-[   26.725327] wlan: [4135:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats:+
-[   26.737119] wlan: [4135:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25 +
-[   26.742636] wlan: [0:I:ANY] ol_ath_pdev_attach: 7542: Set global_ic[1], ptr:ffffffbffcea43e8 +
-[   26.749956] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc036e0bc08) Enabling DBDC Repeater 1 +
-[   26.758547] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   26.767298] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc036e0bc08) is_primary 1 +
-[   26.775751] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7660: Pdev = 0 Number of peers = 529 +
-[   26.784529] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11903: twt enabled. +
-[   26.784529] +
-[   26.793956] wlan: [4135:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 1828: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5 +
-[   26.793956] +
-[   26.802039] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan  36 blocked from cfg +
-[   26.819293] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg +
-[   26.828843] wlan: [4135:I:ANY] osif_wrap_attach: 239: osif wrap attached +
-[   26.828843] +
-[   26.838265] wlan: [4135:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done +
-[   26.838265] +
-[   26.846333] wlan: [4135:I:ANY] osif_wrap_attach: 247:  Wrap Attached: Wrap_com =ffffffc035889c00 ic->ic_wrap_com=ffffffc035889c00 &wrap_com->wc_devt=ffffffc035889c00 +
-[   26.846333] +
-[   26.855584] wlan: [4135:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60 +
-[   26.871872] wlan: [4135:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi0 features 41 +
-[   26.879898] wlan: [4135:I:ANY] wlan_cfg80211_init: 9619: Number of 5G channels: 25 +
-[   26.890231] wlan: [4135:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc033d80880, wdev: 0xffffffc033d90a70, wiphy: 0xffffffc0366952a0, netdev: 0xffffffc033d80000 +
-[   26.898113] wlan: [4135:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi1 +
-[   26.913317] wlan: [4135:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target +
-[   26.920419] wlan: [4135:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default +
-[   26.927891] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7206: interface_id 1 +
-[   26.935385] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6895:  phy id = 1 Modes supported +
-[   26.941736] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6902:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 +
-[   26.950097] wlan: [4135:I:ANY] ol_ath_pdev_regdmn_init: 6910:  Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 +
-[   26.960317] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = 680680c before update +
-[   26.974675] wlan: [4135:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = 680680c after update +
-[   26.984320] wlan: [4135:I:ANY] ol_ath_update_ext_caps: 1850: 11ax 2G supported case +
-[   26.993929] wlan: [4135:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed +
-[   27.001249] ieee80211_cbs_init CBS Inited +
-[   27.010948] wlan: [4135:I:ANY] acfg_attach: 3432: Offload using existing sock ffffffc035889800 +
-[   27.011767] wlan: [4135:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX +
-[   27.020480] wlan: [4135:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats:+
-[   27.030968] wlan: [4135:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11 +
-[   27.038184] wlan: [0:I:ANY] ol_ath_pdev_attach: 7542: Set global_ic[2], ptr:ffffffbffcea43e8 +
-[   27.045530] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc030868788) Enabling DBDC Repeater 1 +
-[   27.054031] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   27.062724] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc030868788) is_primary 0 +
-[   27.071052] wlan: [4135:I:ANY] ol_ath_pdev_attach: 7660: Pdev = 1 Number of peers = 529 +
-[   27.080082] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11903: twt enabled. +
-[   27.080082] +
-[   27.080990] wlan: [4135:E:WMI] event handler already registered 0x6019 +
-[   27.081579] wlan: [4135:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 1828: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5 +
-[   27.081579] +
-[   27.081596] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan  36 blocked from cfg +
-[   27.081599] wlan: [4135:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg +
-[   27.081615] wlan: [4135:I:ANY] osif_wrap_attach: 239: osif wrap attached +
-[   27.081615] +
-[   27.081618] wlan: [4135:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done +
-[   27.081618] +
-[   27.081622] wlan: [4135:I:ANY] osif_wrap_attach: 247:  Wrap Attached: Wrap_com =ffffffc036ca6400 ic->ic_wrap_com=ffffffc036ca6400 &wrap_com->wc_devt=ffffffc036ca6400 +
-[   27.081622] +
-[   27.081643] wlan: [4135:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60 +
-[   27.081647] wlan: [4135:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi1 features 41 +
-[   27.081663] wlan: [4135:I:ANY] wlan_cfg80211_init: 9607: Number of 2G channels: 11 +
-[   27.081822] wlan: [4135:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc033dc0880, wdev: 0xffffffc033dd0a70, wiphy: 0xffffffc0379262a0, netdev: 0xffffffc033dc0000 +
-[   27.082511] wlan: [4135:I:ANY] wlan_pdev_operation: 729: num_radios=1, wifi_radios[0].sc = ffffffc033d80880_radio_type = 2 +
-[   27.082515] wlan: [4135:I:ANY] wlan_pdev_operation: 729: num_radios=2, wifi_radios[1].sc = ffffffc033dc0880_radio_type = 2 +
-[   27.082536] wlan: [4135:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0:  (Atheros/multi-bss) +
-[   27.254130] +
-[   27.254130]  MINIDUMP VA .bss start=ffffffbffd30f180 module=wifi_3_0 +
-[   27.254131] wlan: [4183:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd3a8558 +
-[   27.260975] wlan: [4183:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd3a8558 +
-[   27.273298] wlan: [4183:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0:  (Atheros/multi-bss) +
-No Direct-Attach chipsets found. +
-[   28.160710] EXT4-fs (mmcblk0p11): recovery complete +
-[   28.163020] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: commit=1 +
-[   28.180352] EXT4-fs (mmcblk0p10): recovery complete +
-[   28.180380] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: commit=1 +
-[   28.771451] ECM init +
-[   28.771511] ECM database jhash random seed: 0xe03e5578 +
-[   28.793769] ECM init complete +
-[   29.227645] device eth0 entered promiscuous mode +
-[   29.228834] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready +
-[   29.273398] device eth1 entered promiscuous mode +
-[   29.273454] br-lan: port 2(eth1) entered forwarding state +
-[   29.277145] br-lan: port 2(eth1) entered forwarding state +
-[   29.282628] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready +
-[   29.293340] device eth2 entered promiscuous mode +
-[   29.294230] br-lan: port 3(eth2) entered forwarding state +
-[   29.298933] br-lan: port 3(eth2) entered forwarding state +
-[   29.310239] device eth3 entered promiscuous mode +
-[   29.310296] br-lan: port 4(eth3) entered forwarding state +
-[   29.314241] br-lan: port 4(eth3) entered forwarding state +
-[   29.327113] device eth5 entered promiscuous mode +
-[   29.327193] br-lan: port 5(eth5) entered forwarding state +
-[   29.330822] br-lan: port 5(eth5) entered forwarding state +
-[   29.424428] eth0: PHY Link up speed: 1000 +
-[   29.578815] br-lan: port 1(eth0) entered forwarding state +
-[   29.578847] br-lan: port 1(eth0) entered forwarding state +
-lbd: stopping daemon +
-[   29.872767] __mc_netlink_receive: Disable bridge snooping! +
-[   29.884384] br-lan: port 2(eth1) entered disabled state +
-[   29.884695] br-lan: port 3(eth2) entered disabled state +
-[   29.888699] br-lan: port 4(eth3) entered disabled state +
-[   29.893768] br-lan: port 5(eth5) entered disabled state +
-acfg_tool: Issuing blocking call to wait for events +
-WLAN 6 interfaces not ready, failed +
-lbd: stopping daemon +
-[   30.169130] __mc_netlink_receive: Disable bridge snooping! +
-acfg_tool: Issuing blocking call to wait for events +
-qcawifi qcawificfg80211 disable radio wifi1 +
-qcawifi qcawificfg80211 disable radio wifi0 +
-acfg_tool: Issuing blocking call to wait for events +
-acfg_tool: Issuing blocking call to wait for events +
-qcawifi qcawificfg80211 enable radio wifi1 +
-[   30.865516] wlan: [5633:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 13 +
-[   30.865588] wlan: [5633:I:ANY] number of channels: 2G = 13 5G = 0 +
-[   30.980195] wlan: [5648:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :bc:cf:4f:ff:18:82 ret: 0 +
-[   31.000321] wlan: [5650:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 +
-[   31.059330] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc030868788) Enabling DBDC Repeater 0 +
-[   31.059457] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   31.067246] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   31.075541] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   31.109145] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Disconnect_timeout value: 10 +
-[   31.129969] wlan: [0:I:ANY] ol_ath_set_config_param: 2215: Reconfiguration_timeout value:60 +
-number of vifs: ath0 ath1 ath2 ath3 ath4 ath5 +
-[   31.324354] wlan: [5760:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 6 for interface: ath0 : clone params: 0x00000001 +
-[   31.324423] wlan: [5760:I:ANY] osifp_create_wlan_vap: 10226: VDEV Create bc:cf:4f:ff:18:82 +
-[   31.335359] wlan: [5760:E:CMN_MLME] mlme_vdev_ext_obj_create: 1325:  VDEV MLME obj is creation +
-[   31.343581] wlan: [5760:I:ANY] wlan_vap_create: 1549: enter. devhandle=0xffffffc033dc0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 +
-[   31.343581] +
-[   31.352416] wlan: [5760:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 +
-[   31.365302] wlan: [5760:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:+
-[   31.372316] wlan: [5760:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x7b +
-[   31.385899] wlan: [5760:I:ANY] ol_ath_vap_set_param: 2122: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged +
-[   31.392836] wlan: [5760:I:ANY] MBO Initialized +
-[   31.406873] wlan: [5760:I:ANY] OCE Initialized +
-[   31.411197] wlan: [5760:I:ANY] osif_nss_ol_vap_create: 1289: NSS wifi offload VAP create IF 31 nss_id -1 +
-[   31.415634] wlan: [5760:I:ANY] NSS radio_if 29 +
-[   31.425300] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1041: VDEV configuration success: 0 +
-[   31.429613] wlan: [5760:I:ANY] osif_nss_ol_vap_create: 1397: vap create ffffffc0309e6880 : if_num 31 +
-[   31.437866] wlan: [5760:I:ANY] wlan_vap_create: 1583: exit +
-[   31.447222] wlan: [5760:E:ANY] SA disabled +
-[   31.452689] wlan: [5760:E:ANY] SA disabled +
-[   31.456694] wlan: [5760:I:ANY] osif_create_vap_complete: 10421: TX Checksum:1|SG:1|TSO:1|LRO:+
-[   31.460764] wlan: [5760:I:ANY] WLAN-NSS: VAP NSS ops initialized +
-[   31.470013] wlan: [5760:I:ANY] VAP device ath0 created osifp: (ffffffc0309e6880) os_if: (ffffffc03b7e8000) +
-[   31.574311] br-lan: port 1(eth0) entered forwarding state +
-[   31.684815] __mc_netlink_receive: Disable bridge snooping! +
-[   31.716539] wlan: [5825:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 +
-[   31.891012] wlan: [5893:I:ANY] osif_nss_vdev_set_cfg: 1950: setting hifi mode 5 +
-[   32.151648] wlan: [5918:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:+
-[   32.151692] wlan: [5918:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x73 +
-[   32.200641] wlan: [5920:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:1|ul_mumimo:+
-[   32.200684] wlan: [5920:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x63 +
-[   32.251737] wlan: [5922:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:+
-[   32.251789] wlan: [5922:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x43 +
-[   32.301006] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:+
-[   32.301050] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x3 +
-[   32.549978] 8021q: adding VLAN 0 to HW filter on device ath0 +
-[   32.550811] device ath0 entered promiscuous mode +
-[   32.555001] br-lan: port 6(ath0) entered forwarding state +
-[   32.559335] br-lan: port 6(ath0) entered forwarding state +
-[   32.565401] wlan: [4784:I:ANY] wlan_cfg80211_do_acs: 3295: vap-0(ath0):ACS Params +
-[   32.569982] wlan: [4784:I:ANY] wlan_cfg80211_do_acs: 3298: ht_enabled:0|ht40_enabled:0|vht_enabled:0|hw_mode:29|chwidth:20| +
-[   32.577536] wlan: [4784:I:ANY] ieee80211_autoselect_infra_bss_channel: 3697: ACS started: vap:0xffffffc03b7e8000 +
-[   32.644384] eth4: PHY Link up speed: 1000 +
-[   32.729956] wlan: [6119:I:ANY] wlan_cfg80211_set_wiphy_params: 1782: WARNING: Fragmentation with HT mode NOT ALLOWED!! +
-[   32.743039] wlan: [6122:I:ANY] ol_ath_setTxPowerLimit: 3168: Tx power value is greater than supported max tx power 63, Limiting to default Max +
-[   32.743039] +
-qcawifi qcawificfg80211 enable radio wifi0 +
-[   33.449024] wlan: [6683:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 19 +
-[   33.449150] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58 +
-[   33.455775] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=106 +
-[   33.463568] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=122 +
-[   33.472207] wlan: [6683:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 19 +
-[   33.480054] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58 +
-[   33.487565] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=106 +
-[   33.495720] wlan: [6683:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=122 +
-[   33.503818] wlan: [6683:I:ANY] number of channels: 2G = 0 5G = 19 +
-[   33.512085] wlan: [5333:I:ANY] ol_acfg_handle_wifi_ioctl: 417: ol_acfg_handle_wifi_ioctl: req->cmd=75 not valid for radio interface, it's for VAP +
-Error received: -22 +
-Could not send NL command +
-[   33.642520] wlan: [6819:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :bc:cf:4f:ff:18:83 ret: 0 +
-[   33.666656] wlan: [6836:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 +
-[   33.741525] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc036e0bc08) Enabling DBDC Repeater 0 +
-[   33.741639] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   33.749554] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   33.757853] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   33.790172] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Disconnect_timeout value: 10 +
-[   33.813948] wlan: [0:I:ANY] ol_ath_set_config_param: 2215: Reconfiguration_timeout value:60 +
-number of vifs: ath10 ath11 ath12 ath13 ath14 ath15 +
-[   33.975494] wlan: [7070:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 6 for interface: ath10 : clone params: 0x00000001 +
-[   33.975568] wlan: [7070:I:ANY] osifp_create_wlan_vap: 10226: VDEV Create bc:cf:4f:ff:18:83 +
-[   33.986734] wlan: [7070:E:CMN_MLME] mlme_vdev_ext_obj_create: 1325:  VDEV MLME obj is creation +
-[   33.995006] wlan: [7070:I:ANY] wlan_vap_create: 1549: enter. devhandle=0xffffffc033d80880, opmode=IEEE80211_M_HOSTAP, flags=0x1 +
-[   33.995006] +
-[   34.003653] wlan: [7070:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 +
-[   34.016697] wlan: [7070:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:+
-[   34.023545] wlan: [7070:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x7b +
-[   34.037165] wlan: [7070:I:ANY] ol_ath_vap_set_param: 2122: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged +
-[   34.044068] wlan: [7070:I:ANY] MBO Initialized +
-[   34.058138] wlan: [7070:I:ANY] OCE Initialized +
-[   34.062427] wlan: [7070:I:ANY] osif_nss_ol_vap_create: 1289: NSS wifi offload VAP create IF 34 nss_id -1 +
-[   34.066898] wlan: [7070:I:ANY] NSS radio_if 28 +
-[   34.076528] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1041: VDEV configuration success: 0 +
-[   34.080841] wlan: [7070:I:ANY] osif_nss_ol_vap_create: 1397: vap create ffffffc0297be880 : if_num 34 +
-[   34.089094] wlan: [7070:I:ANY] wlan_vap_create: 1583: exit +
-[   34.098449] wlan: [7070:E:ANY] SA disabled +
-[   34.103922] wlan: [7070:E:ANY] SA disabled +
-[   34.107918] wlan: [7070:I:ANY] osif_create_vap_complete: 10421: TX Checksum:1|SG:1|TSO:1|LRO:+
-[   34.111990] wlan: [7070:I:ANY] WLAN-NSS: VAP NSS ops initialized +
-[   34.121368] wlan: [7070:I:ANY] VAP device ath10 created osifp: (ffffffc0297be880) os_if: (ffffffc029668000) +
-[   34.320448] wlan: [7197:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 +
-[   34.424437] eth0: PHY Link is down +
-[   34.466534] wlan: [7221:I:ANY] osif_nss_vdev_set_cfg: 1950: setting hifi mode 5 +
-[   34.554324] br-lan: port 6(ath0) entered forwarding state +
-[   34.697312] wlan: [7246:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:+
-[   34.697354] wlan: [7246:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x73 +
-[   34.760473] wlan: [7270:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:1|ul_mumimo:+
-[   34.760518] wlan: [7270:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x63 +
-[   34.815087] wlan: [7300:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:+
-[   34.815131] wlan: [7300:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x43 +
-[   34.870117] wlan: [7331:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:+
-[   34.870160] wlan: [7331:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x3 +
-[   34.884631] br-lan: port 1(eth0) entered disabled state +
-[   35.130617] 8021q: adding VLAN 0 to HW filter on device ath10 +
-[   35.131431] device ath10 entered promiscuous mode +
-[   35.135561] br-lan: port 7(ath10) entered forwarding state +
-[   35.140064] br-lan: port 7(ath10) entered forwarding state +
-[   35.215787] wlan: [4784:I:ANY] DES SSID SET=altuntepe2 +
-[   35.215814] wlan: [4784:I:ANY] wlan_cfg80211_set_phymode: 1151: cfg80211 mode:30 +
-[   35.220754] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2734: Keyix=1 Keylen=16 Keyflags=1 Cipher=4 +
-[   35.227427] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2735: macaddr bc:cf:4f:ff:18:83 +
-[   35.236420] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:100 +
-[   35.236578] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps) +
-[   35.244437] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5500. +
-[   35.244448] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5520. +
-[   35.244451] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5540. +
-[   35.244454] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5560. +
-[   35.425630] wlan: [7661:I:ANY] wlan_cfg80211_set_wiphy_params: 1782: WARNING: Fragmentation with HT mode NOT ALLOWED!! +
-[   35.435223] wlan: [7668:I:ANY] ol_ath_setTxPowerLimit: 3168: Tx power value is greater than supported max tx power 63, Limiting to default Max +
-[   35.435223] +
-[   35.453472] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:100 +
-[   35.453630] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps) +
-[   35.458027] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5500. +
-[   35.463061] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5520. +
-[   35.478876] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5540. +
-[   35.479236] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5560. +
-[   35.944013] __mc_netlink_receive: Disable bridge snooping! +
-[   36.424510] eth0: PHY Link up speed: 1000 +
-[   36.424597] br-lan: port 1(eth0) entered forwarding state +
-[   36.427545] br-lan: port 1(eth0) entered forwarding state +
-[   36.802311] wlan: [4091:I:ANY] vap-0(ath0): ACS result PCH 10, SCH 0, hw_mode 1 chwidth 40, vht_seg0 8, vht_seg1 0 +
-[   36.802363] wlan: [4091:I:ANY] ieee80211_acs_scan_evhandler: 3441: lock held duration: 1(ms) +
-[   36.832011] wlan: [4784:I:ANY] DES SSID SET=altuntepe2 +
-[   36.832040] wlan: [4784:I:ANY] wlan_cfg80211_set_phymode: 1151: cfg80211 mode:29 +
-[   36.836880] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2734: Keyix=1 Keylen=16 Keyflags=1 Cipher=4 +
-[   36.843601] wlan: [4784:I:ANY] ol_ath_vdev_install_key_send: 2735: macaddr bc:cf:4f:ff:18:82 +
-[   36.936744] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:10 +
-[   36.937031] wlan: [0:E:ANY] SA disabled +
-[   36.940847] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps) +
-[   36.944504] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps) +
-[   37.144315] br-lan: port 7(ath10) entered forwarding state +
-[   38.424302] br-lan: port 1(eth0) entered forwarding state +
-WLAN 4 interfaces not ready, failed +
-[   52.597272] __mc_netlink_receive: Enable bridge snooping! +
-[   59.181464] Bluetooth: Out-of-order packet arrived, got 1 expected 0 +
-[   64.424521] eth0: PHY Link is down +
-[   64.424765] br-lan: port 1(eth0) entered disabled state +
-[   66.424523] eth0: PHY Link up speed: 1000 +
-[   66.424617] br-lan: port 1(eth0) entered forwarding state +
-[   66.427568] br-lan: port 1(eth0) entered forwarding state +
-[   68.424323] br-lan: port 1(eth0) entered forwarding state +
-[   97.604313] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_cac_timeout: 111: cac expired, chan 5500 curr time 4294764 +
-[   97.604631] wlan: [0:E:WMI] event handler already registered 0x2a001 +
-[   97.613589] wlan: [0:E:ANY] SA disabled +
-[   97.620098] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps) +
-[   97.623677] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5500. +
-[   97.629188] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5520. +
-[   97.637606] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5540. +
-[   97.646118] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5560.+
  
 +Jumping to AARCH64 kernel via monitor
  
-NBG7815 login:</nowiki+[20/02/2023 11:33:00] Booting Linux on physical CPU 0x0 
-</WRAP>\\ +[20/02/2023 11:33:00] Initializing cgroup subsys cpuset 
- +[20/02/2023 11:33:00] Initializing cgroup subsys cpu 
-==== OpenWrt bootlog ==== +[20/02/2023 11:33:00] Initializing cgroup subsys cpuacct 
-<WRAP bootlog+[20/02/2023 11:33:00] Linux version 4.4.60 (openwrt@0e6791bdf6c5) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 eb4b1a4+r49254) ) #1 SMP PREEMPT Wed Sep 29 08:31:14 UTC 2021 
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki> +[20/02/2023 11:33:00] Boot CPU: AArch64 Processor [410fd034] 
-</WRAP>\\ +[20/02/2023 11:33:00] Ignoring memory range 0x40000000 - 0x41000000 
- +[20/02/2023 11:33:00] efi: Getting EFI parameters from FDT: 
-===== Root Access ===== +[20/02/2023 11:33:00] efi: UEFI not found. 
- +[20/02/2023 11:33:00] Reserved memory: OVERLAP DETECTED! 
-Here is steps for root access+[20/02/2023 11:33:00] wifi_dump@51000000 (0x0000000051000000--0x0000000051600000) overlaps with wigig_dump@51200000 (0x0000000051200000--0x0000000051600000) 
-  Disconnect WAN cable +[20/02/2023 11:33:00] On node 0 totalpages: 228864 
-  Reset Armor G5 to factory defaults by pushing reset button 15 secLEDs should lit orange color+[20/02/2023 11:33:00] DMA zone: 3576 pages used for memmap 
-  After 5-10 minuteswhen the LEDs turn constant dark blueput your LAN cable and connect at address 192.168.123.1 by **telnet** on port 23 +[20/02/2023 11:33:00] DMA zone: 0 pages reserved 
-  - Prompt\\ <code> +[20/02/2023 11:33:00] DMA zone: 228864 pages, LIFO batch:31 
-NBG7815 loginroot +[20/02/2023 11:33:00] psci: probing for conduit method from DT. 
-passwordnbg7815@2019 +[20/02/2023 11:33:00] psci: PSCIv1.0 detected in firmware. 
-</code> +[20/02/2023 11:33:00] psci: Using standard PSCI v0.2 function IDs 
- +[20/02/2023 11:33:00] psci: MIGRATE_INFO_TYPE not supported. 
-:!: The root password will change after you set up your router unless you follow the [[#SSH access]] steps+[20/02/2023 11:33:00] PERCPU: Embedded 15 pages/cpu @ffffffc03ef52000 s21120 r8192 d32128 u61440 
- +[20/02/2023 11:33:00] pcpu-alloc: s21120 r8192 d32128 u61440 alloc=15*4096 
-===== SSH access ===== +[20/02/2023 11:33:00] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
- +[20/02/2023 11:33:00] Detected VIPT I-cache on CPU0 
-Firstly you need root access (see [[#Root Access]] section+[20/02/2023 11:33:00] CPU features: enabling workaround for ARM erratum 845719 
- +[20/02/2023 11:33:00] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 225288 
-Enable dropbear daemon in configuration +[20/02/2023 11:33:00] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait swiotlb=1 
- +[20/02/2023 11:33:00] PID hash table entries: 4096 (order: 3, 32768 bytes) 
-<code+[20/02/2023 11:33:00] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 
-root@NBG7815:~# uci set dropbear.setting.enable=+[20/02/2023 11:33:00] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 
-root@NBG7815:~uci commit dropbear +[20/02/2023 11:33:00] software IO TLB [mem 0x7fe0a000-0x7fe4a000] (0MB) mapped at [ffffffc03ee0a000-ffffffc03ee49fff] 
-</code> +[20/02/2023 11:33:00] Memory: 887072K/915456K available (5602K kernel code, 637K rwdata, 2380K rodata, 232K init, 406K bss, 28384K reserved, 0K cma-reserved) 
- +[20/02/2023 11:33:00] Virtual kernel memory layout: 
-Save your network configuration+[20/02/2023 11:33:00] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000     246 GB) 
- +[20/02/2023 11:33:00] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000       8 GB maximum) 
-<code+[20/02/2023 11:33:00] 0xffffffbdc0040000 - 0xffffffbdc1000000      15 MB actual) 
-root@NBG7815:~uci set network.general.auto_ip_change=0 +[20/02/2023 11:33:00] fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000    4108 KB) 
-root@NBG7815:~# uci commit network +[20/02/2023 11:33:00] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000      16 MB) 
-</code> +[20/02/2023 11:33:00] modules : 0xffffffbffc000000 - 0xffffffc000000000      64 MB) 
- +[20/02/2023 11:33:00] memory  : 0xffffffc000000000 - 0xffffffc03f000000    1008 MB) 
-Comment lines in preboot file like below+[20/02/2023 11:33:00] .init : 0xffffffc00084e000 - 0xffffffc000888000     232 KB) 
- +[20/02/2023 11:33:00] .text : 0xffffffc000080000 - 0xffffffc00084da14    7991 KB) 
-<code> +[20/02/2023 11:33:00] .data : 0xffffffc000898000 - 0xffffffc000937400     637 KB) 
-root@NBG7815:~# vi /etc/init.d/preboot +[20/02/2023 11:33:00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
- +[20/02/2023 11:33:00] Preemptible hierarchical RCU implementation. 
-        #dropbear +[20/02/2023 11:33:00] Build-time adjustment of leaf fanout to 64. 
-        #ck_dropbear=$(uci get dropbear.setting.enable+[20/02/2023 11:33:00] NR_IRQS:64 nr_irqs:64 0 
-        #if "$ck_dropbear" !"0]; then +[20/02/2023 11:33:00] Architected cp15 timer(s) running at 19.20MHz (virt). 
-        #       uci set dropbear.setting.enable=0 +[20/02/2023 11:33:00] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns 
-        #       uci commit dropbear +[20/02/2023 11:33:00] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns 
-        #fi +[20/02/2023 11:33:00] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 
- +[20/02/2023 11:33:00] pid_max: default: 32768 minimum: 301 
-        # If user already installed it will lock login permission +[20/02/2023 11:33:00] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 
-        #install_mode=$(uci get system.main.install_mode+[20/02/2023 11:33:00] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 
-        #if "$install_mode" == "1" ]; then +[20/02/2023 11:33:00] Initializing cgroup subsys io 
-        #       znet_setroot +[20/02/2023 11:33:00] Initializing cgroup subsys memory 
-        #fi +[20/02/2023 11:33:00] Initializing cgroup subsys devices 
-</code+[20/02/2023 11:33:00] Initializing cgroup subsys freezer 
-After these steps your root password will not change and it will starts dropbear daemon every time when you starts your Armor G5 +[20/02/2023 11:33:00] Initializing cgroup subsys net_cls 
- +[20/02/2023 11:33:00] Initializing cgroup subsys pids 
-===== Full U-Boot access ===== +[20/02/2023 11:33:00] EFI services will not be available. 
- +[20/02/2023 11:33:00] ASID allocator initialised with 65536 entries 
-Connect cable to Serial Port +[20/02/2023 11:33:00] MSM Memory Dump base table set up 
- +[20/02/2023 11:33:00] MSM Memory Dump apps data table set up 
-1After resetinterrupt autoboot by pushing any key+[20/02/2023 11:33:00] Detected VIPT I-cache on CPU1 
- +[20/02/2023 11:33:00] CPU1: Booted secondary processor [410fd034] 
-<code+[20/02/2023 11:33:00] Detected VIPT I-cache on CPU2 
-Zyxel zloader v1.0.0 (2020-01-06 08:24) +[20/02/2023 11:33:00] CPU2: Booted secondary processor [410fd034] 
- +[20/02/2023 11:33:00] Detected VIPT I-cache on CPU3 
- +[20/02/2023 11:33:00] CPU3: Booted secondary processor [410fd034] 
-Multiboot clinent version2.0 +[20/02/2023 11:33:00] Brought up 4 CPUs 
-ipq807x_eth_haltdone +[20/02/2023 11:33:00] SMP: Total of 4 processors activated. 
-eth0 PHY0 Down Speed :10 Half duplex +[20/02/2023 11:33:00] CPU: All CPU(s) started at EL1 
-eth0 PHY1 Down Speed :10 Half duplex +[20/02/2023 11:33:00] alternatives: patching kernel code 
-eth0 PHY2 Down Speed :10 Half duplex +[20/02/2023 11:33:00] DMI not present or invalid. 
-eth0 PHY3 Down Speed :10 Half duplex +[20/02/2023 11:33:00] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
-eth0 PHY4 Down Speed :10 Half duplex +[20/02/2023 11:33:00] futex hash table entries: 1024 (order: 5, 131072 bytes) 
-10M speed not supported +[20/02/2023 11:33:00] pinctrl core: initialized pinctrl subsystem 
-ipq807x_eth_haltdone +[20/02/2023 11:33:00] NET: Registered protocol family 16 
-Ethernet interface failed to initialized! +[20/02/2023 11:33:00] cpuidle: using governor ladder 
- +[20/02/2023 11:33:00] cpuidle: using governor menu 
-Hit any key to stop autoboot:  3 +[20/02/2023 11:33:00] vdso: 2 pages (1 code @ ffffffc00089d000, 1 data @ ffffffc00089c000) 
-NBG7815+[20/02/2023 11:33:00] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 
-</code+[20/02/2023 11:33:00] DMA: preallocated 256 KiB pool for atomic allocations 
- +[20/02/2023 11:33:00] CPU: unavail, SoC Version: 2.0 
-2. Get the seed for your password +[20/02/2023 11:33:00] <CORE> glink_init: IPC Logging Disabled 
- +[20/02/2023 11:33:00] IPC logging disabled 
-<code> +[20/02/2023 11:33:00] IPC logging disabled 
-NBG7815> ATSE NBG7815 +[20/02/2023 11:33:00] IPC logging disabled 
-013D72FF0710 +[20/02/2023 11:33:00] IPC logging disabled 
-</code+[20/02/2023 11:33:00] IPC logging disabled 
- +[20/02/2023 11:33:00] gpiochip_add: registered GPIOs 0 to 69 on device: 1000000.pinctrl 
-:!Seed is always different +[20/02/2023 11:33:00] GPIO chip 1000000.pinctrl: created GPIO range 0->69 ==> 1000000.pinctrl PIN 0->69 
- +[20/02/2023 11:33:00] Soc version is not 1, changing clock offsets 
-3Generate password +[20/02/2023 11:33:00] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! 
- +[20/02/2023 11:33:00] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! 
-Get bash script from https://github.com/itorK/nbg7815_tools/blob/main/tool.sh and use to calcuate password with your seed as like below +[20/02/2023 11:33:00] msm_rpm_dev_probe: APSS-RPM communication over GLINK 
- +[20/02/2023 11:33:00] sps:sps is ready. 
-<code> +[20/02/2023 11:33:00] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
-# sh tool.sh 013D72FF0710 +[20/02/2023 11:33:00] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 
-ATEN 1,10F0A563 +[20/02/2023 11:33:00] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed-regulator@0[0]' 
-</code> +[20/02/2023 11:33:00] pps_core: LinuxPPS API ver. 1 registered 
- +[20/02/2023 11:33:00] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 
-Put output in terminal  +[20/02/2023 11:33:00] PTP clock support registered 
- +[20/02/2023 11:33:00] dmi: Firmware registration failed. 
-<code> +[20/02/2023 11:33:00] Advanced Linux Sound Architecture Driver Initialized. 
-NBG7815> ATEN 1,10F0A563 +[20/02/2023 11:33:00] clocksource: Switched to clocksource arch_sys_counter 
-</code+[20/02/2023 11:33:00] NET: Registered protocol family 2 
- +[20/02/2023 11:33:00] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 
-4. Login with full u-boot access +[20/02/2023 11:33:00] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 
- +[20/02/2023 11:33:00] TCP: Hash tables configured (established 8192 bind 8192) 
-<code> +[20/02/2023 11:33:00] UDP hash table entries: 512 (order: 2, 16384 bytes) 
-NBG7815> ATGU +[20/02/2023 11:33:00] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 
-ZYXEL# +[20/02/2023 11:33:00] NET: Registered protocol family 1 
-</code>+[20/02/2023 11:33:00] PCI: CLS 0 bytes, default 128 
 +[20/02/2023 11:33:00] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 
 +[20/02/2023 11:33:00] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[20/02/2023 11:33:00] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[20/02/2023 11:33:00] fuse init (API version 7.23) 
 +[20/02/2023 11:33:00] Key type asymmetric registered 
 +[20/02/2023 11:33:00] Asymmetric key parser 'x509' registered 
 +[20/02/2023 11:33:00] io scheduler noop registered 
 +[20/02/2023 11:33:00] io scheduler deadline registered (default) 
 +[20/02/2023 11:33:00] qcom-pcie 20000000.pci: GPIO lookup for consumer perst 
 +[20/02/2023 11:33:00] qcom-pcie 20000000.pci: using device tree for GPIO lookup 
 +[20/02/2023 11:33:00] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@20000000[0]' 
 +[20/02/2023 11:33:00] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@20000000[0]' - status (0) 
 +[20/02/2023 11:33:00] 20000000.pci supply vdda not found, using dummy regulator 
 +[20/02/2023 11:33:00] 20000000.pci supply vdda_phy not found, using dummy regulator 
 +[20/02/2023 11:33:00] 20000000.pci supply vdda_refclk not found, using dummy regulator 
 +[20/02/2023 11:33:00] PCI host bridge /soc/pci@20000000 ranges: 
 +[20/02/2023 11:33:00] IO 0x20200000..0x202fffff -0x20200000 
 +[20/02/2023 11:33:00] MEM 0x20300000..0x20ffffff -> 0x20300000 
 +[20/02/2023 11:33:01] qcom-pcie 20000000.pci: phy link never came up 
 +[20/02/2023 11:33:01] qcom-pcie 20000000.pci: hostinit failed 
 +[20/02/2023 11:33:01] qcom-pcie 20000000.pci: cannot initialize host 
 +[20/02/2023 11:33:01] qcom-pcie: probe of 20000000.pci failed with error -110 
 +[20/02/2023 11:33:01] qcom-pcie 10000000.pci: GPIO lookup for consumer perst 
 +[20/02/2023 11:33:01] qcom-pcie 10000000.pci: using device tree for GPIO lookup 
 +[20/02/2023 11:33:01] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@10000000[0]' 
 +[20/02/2023 11:33:01] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@10000000[0]' - status (0) 
 +[20/02/2023 11:33:01] 10000000.pci supply vdda not found, using dummy regulator 
 +[20/02/2023 11:33:01] 10000000.pci supply vdda_phy not found, using dummy regulator 
 +[20/02/2023 11:33:01] 10000000.pci supply vdda_refclk not found, using dummy regulator 
 +[20/02/2023 11:33:01] PCI host bridge /soc/pci@10000000 ranges: 
 +[20/02/2023 11:33:01] IO 0x10200000..0x102fffff -> 0x10200000 
 +[20/02/2023 11:33:01] MEM 0x10300000..0x10ffffff -> 0x10300000 
 +[20/02/2023 11:33:02] qcom-pcie 10000000.pci: phy link never came up 
 +[20/02/2023 11:33:02] qcom-pcie 10000000.pci: hostinit failed 
 +[20/02/2023 11:33:02] qcom-pcie 10000000.pci: cannot initialize host 
 +[20/02/2023 11:33:02] qcom-pcie: probe of 10000000.pci failed with error -110 
 +[20/02/2023 11:33:02] MDSS QPIC HW Base phy_Address=0x7980000 virt=ffffff80004c0000 
 +[20/02/2023 11:33:02] mdss_qpic_panel_probe: Panel Name qpic lcd panel 
 +[20/02/2023 11:33:02] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully! 
 +[20/02/2023 11:33:02] NET: Registered protocol family 27 
 +[20/02/2023 11:33:02] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled 
 +[20/02/2023 11:33:02] qmi_log_init: IPC Logging disabled 
 +[20/02/2023 11:33:02] qmi_log_init: IPC Logging disabled 
 +[20/02/2023 11:33:02] msm_rpm_log_probe: OK 
 +[20/02/2023 11:33:02] msm-dcc b3000.dcc: DCC XPU is not specified 
 +[20/02/2023 11:33:02] msm-dcc b3000.dcc: DCC SRAM dump setup failed 
 +[20/02/2023 11:33:02] msm-dcc b3000.dcc: jiffies_64: 0xffff8bbe, cntvct_64: 0x77ff162c 
 +[20/02/2023 11:33:02] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80003de004) 
 +[20/02/2023 11:33:02] msm-dcc b3000.dcc: gcnt_lo: 0x77ff17db(0xffffff80003de000) 
 +[20/02/2023 11:33:02] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set 
 +[20/02/2023 11:33:02] msm_serial 78b3000.serial: msm_serial: detected port #0 
 +[20/02/2023 11:33:02] msm_serial 78b3000.serial: uartclk 3686400 
 +[20/02/2023 11:33:02] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq 77, base_baud 230400) is a MSM 
 +[20/02/2023 11:33:02] msm_serial: console setup on port #0 
 +[20/02/2023 11:33:03] console [ttyMSM0] enabled 
 +[20/02/2023 11:33:03] msm_serial 78b1000.serial: msm_serial: detected port #1 
 +[20/02/2023 11:33:03] msm_serial 78b1000.serial: uartclk 19200000 
 +[20/02/2023 11:33:03] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq 78, base_baud = 1200000) is a MSM 
 +[20/02/2023 11:33:03] msm_serial: driver initialized 
 +[20/02/2023 11:33:03] msm_serial_hsl_init: driver initialized 
 +[20/02/2023 11:33:03] brd: module loaded 
 +[20/02/2023 11:33:03] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 
 +[20/02/2023 11:33:03] m25p80 spi32766.0: found w25q64dw, expected n25q128a11 
 +[20/02/2023 11:33:03] m25p80 spi32766.0: w25q64dw (8192 Kbytes) 
 +[20/02/2023 11:33:03] 22 ofpart partitions found on MTD device spi32766.0 
 +[20/02/2023 11:33:03] Creating 22 MTD partitions on "spi32766.0": 
 +[20/02/2023 11:33:03] 0x000000000000-0x000000050000 : "0:SBL1" 
 +[20/02/2023 11:33:03] 0x000000050000-0x000000060000 : "0:MIBIB" 
 +[20/02/2023 11:33:03] 0x000000060000-0x000000080000 : "0:BOOTCONFIG" 
 +[20/02/2023 11:33:03] 0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1" 
 +[20/02/2023 11:33:03] 0x0000000a0000-0x000000220000 : "0:QSEE" 
 +[20/02/2023 11:33:03] 0x000000220000-0x0000003a0000 : "0:QSEE_1" 
 +[20/02/2023 11:33:03] 0x0000003a0000-0x0000003b0000 : "0:DEVCFG" 
 +[20/02/2023 11:33:03] 0x0000003b0000-0x0000003c0000 : "0:DEVCFG_1" 
 +[20/02/2023 11:33:03] 0x0000003c0000-0x0000003d0000 : "0:APDP" 
 +[20/02/2023 11:33:03] 0x0000003d0000-0x0000003e0000 : "0:APDP_1" 
 +[20/02/2023 11:33:03] 0x0000003e0000-0x000000420000 : "0:RPM" 
 +[20/02/2023 11:33:03] 0x000000420000-0x000000460000 : "0:RPM_1" 
 +[20/02/2023 11:33:03] 0x000000460000-0x000000470000 : "0:CDT" 
 +[20/02/2023 11:33:03] 0x000000470000-0x000000480000 : "0:CDT_1" 
 +[20/02/2023 11:33:03] 0x000000480000-0x000000540000 : "0:APPSBL" 
 +[20/02/2023 11:33:03] 0x000000540000-0x000000600000 : "0:APPSBL_1" 
 +[20/02/2023 11:33:03] 0x000000600000-0x000000610000 : "0:APPSBLENV" 
 +[20/02/2023 11:33:03] 0x000000610000-0x000000650000 : "0:ART" 
 +[20/02/2023 11:33:03] 0x000000650000-0x0000006d0000 : "0:ETHPHYFW" 
 +[20/02/2023 11:33:03] 0x0000006d0000-0x0000006e0000 : "0:CRT" 
 +[20/02/2023 11:33:03] 0x0000006e0000-0x0000006f0000 : "DUAL_FLAG" 
 +[20/02/2023 11:33:03] 0x0000006f0000-0x000000800000 : "RESERVED" 
 +[20/02/2023 11:33:03] spmi spmi-0: PMIC Arb Version-2 (0x20010000) 
 +[20/02/2023 11:33:03] libphy: Fixed MDIO Bus: probed 
 +[20/02/2023 11:33:03] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0) 
 +[20/02/2023 11:33:03] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[1]' - status (0) 
 +[20/02/2023 11:33:03] of_get_named_gpiod_flags: can't parse 'phy-reset-gpio' property of node '/soc/mdio@90000[2]' 
 +[20/02/2023 11:33:03] qca-mdio 90000.mdio: Could not find phy-reset-gpio 
 +[20/02/2023 11:33:03] libphy: qca_mdio: probed 
 +[20/02/2023 11:33:03] qca-mdio 90000.mdio: qca-mdio driver was registered 
 +[20/02/2023 11:33:03] Unable to create IPC log context! 
 +[20/02/2023 11:33:03] cnss: Platform driver probed successfully. 
 +[20/02/2023 11:33:03] Skip QCA8074V1 in V2 platform 
 +[20/02/2023 11:33:03] cnss_genl: genl_register_family fail: -17 
 +[20/02/2023 11:33:03] cnss: CNSS genl init failed -17 
 +[20/02/2023 11:33:03] cnss: Platform driver probed successfully. 
 +[20/02/2023 11:33:03] i2c /dev entries driver 
 +[20/02/2023 11:33:03] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com 
 +[20/02/2023 11:33:03] sdhci: Secure Digital Host Controller Interface driver 
 +[20/02/2023 11:33:03] sdhci: Copyright(c) Pierre Ossman 
 +[20/02/2023 11:33:03] sdhci-pltfm: SDHCI platform and OF driver helper 
 +[20/02/2023 11:33:03] qcom_ice_get_pdevice: invalid device list 
 +[20/02/2023 11:33:03] sdhci_msm 7824900.sdhci: sdhci_msm_ice_get_dev: ICE device not probed yet 
 +[20/02/2023 11:33:03] sdhci_msm 7824900.sdhci: sdhci_msm_probe: required ICE device not probed yet err = -517 
 +[20/02/2023 11:33:03] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/soc/i2c@78b6000/lp5569@32[0]' 
 +[20/02/2023 11:33:03] lp5569x 0-0032: lp5569 Programmable led chip found 
 +[20/02/2023 11:33:03] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/soc/i2c@78b6000/lp5569@35[0]' 
 +[20/02/2023 11:33:04] lp5569x 0-0035: lp5569 Programmable led chip found 
 +[20/02/2023 11:33:04] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed 
 +[20/02/2023 11:33:04] ICE IRQ = 81 
 +[20/02/2023 11:33:04] 
 +[20/02/2023 11:33:04] Version Rollback Feature Disabled 
 +[20/02/2023 11:33:04] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000 
 +[20/02/2023 11:33:04] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000 
 +[20/02/2023 11:33:04] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000 
 +[20/02/2023 11:33:04] sps:BAM 0x0000000008b04000 is registered.<0>[    4.078636] DEV CI test message 
 +[20/02/2023 11:33:04] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group 
 +[20/02/2023 11:33:04] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group 
 +[20/02/2023 11:33:04] remoteproc remoteproc0: q6v5-m3 is available 
 +[20/02/2023 11:33:04] SPMI VADC - Min ch: 0 Max ch: 15 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 
 +[20/02/2023 11:33:04] coresight-csr 6001000.csr: CSR initialized 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 
 +[20/02/2023 11:33:04] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 
 +[20/02/2023 11:33:04] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 
 +[20/02/2023 11:33:04] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 
 +[20/02/2023 11:33:04] sps:BAM 0x0000000006044000 is registered.<6>[    4.324410] coresight-tmc 6028000.tmc: TMC initialized 
 +[20/02/2023 11:33:04] coresight-tmc 6027000.tmc: TMC initialized 
 +[20/02/2023 11:33:04] coresight-funnel 6021000.funnel: FUNNEL initialized 
 +[20/02/2023 11:33:04] coresight-funnel 6100000.funnel: FUNNEL initialized 
 +[20/02/2023 11:33:04] coresight-funnel 6120000.funnel: FUNNEL initialized 
 +[20/02/2023 11:33:04] coresight-funnel 61a1000.funnel: FUNNEL initialized 
 +[20/02/2023 11:33:04] coresight-etm4x 619c000.etm: ETM 4.0 initialized 
 +[20/02/2023 11:33:04] coresight-etm4x 619d000.etm: ETM 4.0 initialized 
 +[20/02/2023 11:33:04] coresight-etm4x 619e000.etm: ETM 4.0 initialized 
 +[20/02/2023 11:33:04] coresight-etm4x 619f000.etm: ETM 4.0 initialized 
 +[20/02/2023 11:33:04] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized 
 +[20/02/2023 11:33:04] coresight-stm 6002000.stm: STM initialized 
 +[20/02/2023 11:33:04] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 
 +[20/02/2023 11:33:04] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized 
 +[20/02/2023 11:33:04] Netfilter messages via NETLINK v0.30. 
 +[20/02/2023 11:33:04] nf_conntrack version 0.5.0 (6930 buckets, 27720 max) 
 +[20/02/2023 11:33:04] ctnetlink v0.93: registering with nfnetlink. 
 +[20/02/2023 11:33:04] NET: Registered protocol family 10 
 +[20/02/2023 11:33:04] NET: Registered protocol family 17 
 +[20/02/2023 11:33:04] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
 +[20/02/2023 11:33:04] Bridge firewalling registered 
 +[20/02/2023 11:33:04] 8021q: 802.1Q VLAN Support v1.8 
 +[20/02/2023 11:33:04] <COREglink_core_register_transport: IPC Logging disabled 
 +[20/02/2023 11:33:04] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
 +[20/02/2023 11:33:04] msm_glink_smem_native_xprt rx fifo not found 
 +[20/02/2023 11:33:04] pmd9655_s3: supplied by e-smps1-reg 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config 0 boost disable 
 +[20/02/2023 11:33:04] cpr3_mem_acc_init: apc: not using memory accelerator regulator 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop712000 uV 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop832000 uV 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop904000 uV 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop992000 uV 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]701, quot_offset[ 7]=   0 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 925, quot_offset[ 7]= 220 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1045, quot_offset[ 7]= 120 
 +[20/02/2023 11:33:04] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1198, quot_offset[ 7]= 150 
 +[20/02/2023 11:33:04] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop 
 +[20/02/2023 11:33:04] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 
 +[20/02/2023 11:33:04] pmd9655_s4: supplied by e-smps1-reg 
 +[20/02/2023 11:33:04] cpr3_mem_acc_init: npu: not using memory accelerator regulator 
 +[20/02/2023 11:33:04] npu_corner: fused      NOM: open-loop= 800000 uV 
 +[20/02/2023 11:33:04] npu_corner: fused    TURBO: open-loop= 880000 uV 
 +[20/02/2023 11:33:04] npu_corner: fused      NOM: open-loop= 800000 uV 
 +[20/02/2023 11:33:04] npu_corner: fused    TURBO: open-loop= 880000 uV 
 +[20/02/2023 11:33:04] npu_corner: Normal and Cold condition init done. Default to normal. 
 +[20/02/2023 11:33:04] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz 
 +[20/02/2023 11:33:04] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz 
 +[20/02/2023 11:33:04] qcom_ice_get_pdevice: found ice device ffffffc03cf08a00 
 +[20/02/2023 11:33:04] qcom_ice_get_pdevice: matching platform device ffffffc03d575c00 
 +[20/02/2023 11:33:04] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@7824900[0]' 
 +[20/02/2023 11:33:04] of_get_named_gpiod_flags: can't parse 'sd-ldo-gpios' property of node '/soc/sdhci@7824900[0]' 
 +[20/02/2023 11:33:04] sdhci_msm 7824900.sdhci: No vreg data found for vdd 
 +[20/02/2023 11:33:04] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io 
 +[20/02/2023 11:33:04] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff80008c8000 
 +[20/02/2023 11:33:04] sdhci_msm 7824900.sdhci: No vmmc regulator found 
 +[20/02/2023 11:33:04] sdhci_msm 7824900.sdhci: No vqmmc regulator found 
 +[20/02/2023 11:33:04] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit 
 +[20/02/2023 11:33:04] DEV CI test message 
 +[20/02/2023 11:33:04] remoteproc remoteproc1: q6v5-wcss is available 
 +[20/02/2023 11:33:04] hctosys: unable to open rtc device (rtc0) 
 +[20/02/2023 11:33:04] pmd9655_ldo11: disabling 
 +[20/02/2023 11:33:04] ALSA device list: 
 +[20/02/2023 11:33:04] No soundcards found. 
 +[20/02/2023 11:33:04] Waiting for root device PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a... 
 +[20/02/2023 11:33:04] mmc0: MAN_BKOPS_EN bit is not set 
 +[20/02/2023 11:33:04] mmc0: new high speed MMC card at address 0001 
 +[20/02/2023 11:33:04] mmcblk0: mmc0:0001 M62704 3.53 GiB 
 +[20/02/2023 11:33:04] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB 
 +[20/02/2023 11:33:04] GPT: device [179:4] (rootfs) set to be root filesystem 
 +[20/02/2023 11:33:04] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 
 +[20/02/2023 11:33:04] VFS: Mounted root (squashfs filesystem) readonly on device 179:8. 
 +[20/02/2023 11:33:04] Freeing unused kernel memory: 232K (ffffffc00084e000 ffffffc000888000) 
 +[20/02/2023 11:33:04] Freeing alternatives memory: 44K (ffffffc000888000 ffffffc000893000) 
 +[20/02/2023 11:33:05] init: Console is alive 
 +[20/02/2023 11:33:05] init: - watchdog - 
 +[20/02/2023 11:33:05] usbcore: registered new interface driver usbfs 
 +[20/02/2023 11:33:05] usbcore: registered new interface driver hub 
 +[20/02/2023 11:33:05] usbcore: registered new device driver usb 
 +[20/02/2023 11:33:05] Button Hotplug driver version 0.4.1 
 +[20/02/2023 11:33:05] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/button@1[0]' - status (0) 
 +[20/02/2023 11:33:05] SCSI subsystem initialized 
 +[20/02/2023 11:33:05] libata version 3.00 loaded. 
 +[20/02/2023 11:33:05] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +[20/02/2023 11:33:05] ehci-platform: EHCI generic platform driver 
 +[20/02/2023 11:33:05] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy 
 +[20/02/2023 11:33:05] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout 
 +[20/02/2023 11:33:05] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868 
 +[20/02/2023 11:33:06] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy 
 +[20/02/2023 11:33:06] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout 
 +[20/02/2023 11:33:06] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.0.auto: new USB bus registeredassigned bus number 1 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.0.auto: irq 211io mem 0x08a00000 
 +[20/02/2023 11:33:06] hub 1-0:1.0: USB hub found 
 +[20/02/2023 11:33:06] hub 1-0:1.0: 1 port detected 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 
 +[20/02/2023 11:33:06] usb usb2: We don't know the algorithms for LPM for this hostdisabling LPM. 
 +[20/02/2023 11:33:06] hub 2-0:1.0: USB hub found 
 +[20/02/2023 11:33:06] hub 2-0:1.0: 1 port detected 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.1.auto: irq 212, io mem 0x08c00000 
 +[20/02/2023 11:33:06] hub 3-0:1.0: USB hub found 
 +[20/02/2023 11:33:06] hub 3-0:1.0: 1 port detected 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
 +[20/02/2023 11:33:06] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 
 +[20/02/2023 11:33:06] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
 +[20/02/2023 11:33:06] hub 4-0:1.0: USB hub found 
 +[20/02/2023 11:33:06] hub 4-0:1.0: 1 port detected 
 +[20/02/2023 11:33:06] usbcore: registered new interface driver usb-storage 
 +[20/02/2023 11:33:06] usbcore: registered new interface driver uas 
 +[20/02/2023 11:33:06] usb 3-1: new high-speed USB device number 2 using xhci-hcd 
 +[20/02/2023 11:33:06] hub 3-1:1.0: USB hub found 
 +[20/02/2023 11:33:06] hub 3-1:1.0: 4 ports detected 
 +[20/02/2023 11:33:06] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd 
 +[20/02/2023 11:33:06] hub 4-1:1.0: USB hub found 
 +[20/02/2023 11:33:06] hub 4-1:1.0: 4 ports detected 
 +[20/02/2023 11:33:07] init: - preinit - 
 +[20/02/2023 11:33:07] usb 3-1.4: new high-speed USB device number 3 using xhci-hcd 
 +[20/02/2023 11:33:07] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available) 
 +[20/02/2023 11:33:07] usb-storage 3-1.4:1.0: USB Mass Storage device detected 
 +[20/02/2023 11:33:07] scsi host0: usb-storage 3-1.4:1.0 
 +[20/02/2023 11:33:07] usb 4-1.3: new SuperSpeed USB device number 3 using xhci-hcd 
 +[20/02/2023 11:33:07] usb-storage 4-1.3:1.0: USB Mass Storage device detected 
 +[20/02/2023 11:33:07] scsi host1: usb-storage 4-1.3:1.0 
 +[20/02/2023 11:33:08] scsi 0:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 
 +[20/02/2023 11:33:08] sd 0:0:0:0: [sda] 240328704 512-byte logical blocks: (123 GB/115 GiB) 
 +[20/02/2023 11:33:08] sd 0:0:0:0: [sda] Write Protect is off 
 +[20/02/2023 11:33:08] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 
 +[20/02/2023 11:33:08] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 
 +[20/02/2023 11:33:08] sda: sda1 sda2 
 +[20/02/2023 11:33:08] sd 0:0:0:0: [sda] Attached SCSI removable disk 
 +[20/02/2023 11:33:08] scsi 1:0:0:0: Direct-Access     ATA      ADATA SU650      2A   PQ: 0 ANSI: 6 
 +[20/02/2023 11:33:08] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) 
 +[20/02/2023 11:33:08] sd 1:0:0:0: [sdb] Write Protect is off 
 +[20/02/2023 11:33:08] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 
 +[20/02/2023 11:33:08] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 
 +[20/02/2023 11:33:08] sdb: sdb1 
 +[20/02/2023 11:33:08] sd 1:0:0:0: [sdb] Attached SCSI disk 
 +[20/02/2023 11:33:09] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) 
 +[20/02/2023 11:33:09] mount_root: switching to jffs2 overlay 
 +[20/02/2023 11:33:09] procd: - early - 
 +[20/02/2023 11:33:09] procd: - watchdog - 
 +[20/02/2023 11:33:10] procd: - ubus - 
 +[20/02/2023 11:33:10] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available) 
 +[20/02/2023 11:33:11] procd: - init - 
 +[20/02/2023 11:33:12] FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! 
 +[20/02/2023 11:33:12] cfg80211: World regulatory domain updated: 
 +[20/02/2023 11:33:12] cfg80211:  DFS Master region: unset 
 +[20/02/2023 11:33:12] cfg80211:   (start_freq end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) 
 +[20/02/2023 11:33:12] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 
 +[20/02/2023 11:33:12] cfg80211:   (2457000 KHz - 2482000 KHz 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) 
 +[20/02/2023 11:33:12] ntfs: driver 2.1.32 [Flags: R/O MODULE]. 
 +[20/02/2023 11:33:12] Initializing XFRM netlink socket 
 +[20/02/2023 11:33:12] NET: Registered protocol family 15 
 +[20/02/2023 11:33:12] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) 
 +[20/02/2023 11:33:12] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) 
 +[20/02/2023 11:33:12] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) 
 +[20/02/2023 11:33:12] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) 
 +[20/02/2023 11:33:12] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 
 +[20/02/2023 11:33:12] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) 
 +[20/02/2023 11:33:12] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1 
 +[20/02/2023 11:33:12] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist! 
 +[20/02/2023 11:33:12] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus 
 +[20/02/2023 11:33:12ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000 
 +[20/02/2023 11:33:12] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000 
 +[20/02/2023 11:33:12] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0 
 +[20/02/2023 11:33:12] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xf 
 +[20/02/2023 11:33:12] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xd 
 +[20/02/2023 11:33:12] ssdk_dt_parse_phy_info[569]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT 
 +[20/02/2023 11:33:12] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist! 
 +[20/02/2023 11:33:12] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC bc:cf:4f:ff:1b:a0 
 +[20/02/2023 11:33:12] ssdk_plat_init start 
 +[20/02/2023 11:33:12] ssdk_ppe_clock_init[464]:INFO:ppe and uniphy clock init successfully! 
 +[20/02/2023 11:33:12] ssdk_probe[1878]:INFO:ess_rst doesn't exist! 
 +[20/02/2023 11:33:12] HPPE initializing..
 +[20/02/2023 11:33:12] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 
 +[20/02/2023 11:33:12] <DBG> MALIBU 8075 Found, phytype=
 +[20/02/2023 11:33:12] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 
 +[20/02/2023 11:33:12] <DBG> MALIBU 8075 Found, phytype=
 +[20/02/2023 11:33:12] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 
 +[20/02/2023 11:33:12] <DBG> MALIBU 8075 Found, phytype=
 +[20/02/2023 11:33:12] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd0b1 
 +[20/02/2023 11:33:12] <DBG> MALIBU 8075 Found, phytype=2 
 +[20/02/2023 11:33:12] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=4dd101 
 +[20/02/2023 11:33:12] *************************hsl_phytype_get_by_phyid 193 phytype=7, phy_id=31c31c12 
 +[20/02/2023 11:33:12<DBG> AQUANTIA PHY Found, phytype=3 
 +[20/02/2023 11:33:12malibu_phy_api_ops_init[2851]:INFO:qca probe malibu phy driver succeeded! 
 +[20/02/2023 11:33:12] aquantia_phy_api_ops_init[2180]:INFO:qca probe aquantia phy driver succeeded! 
 +[20/02/2023 11:33:12] qca808x_phy_api_ops_init[2125]:INFO:qca probe qca808x phy driver succeeded! 
 +[20/02/2023 11:33:12] qca808x_ptp_register[1377]:INFO:qca808x ptp clock registered 
 +[20/02/2023 11:33:12] regi_init[3405]:INFO:Initializing HPPE!! 
 +[20/02/2023 11:33:13] ssdk_ppe_reset_init[738]:INFO:ppe reset successfully! 
 +[20/02/2023 11:33:13] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96 
 +[20/02/2023 11:33:13] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing 
 +[20/02/2023 11:33:14] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! 
 +[20/02/2023 11:33:16] ssdk_switch_register[1617]:INFO:Chip version 0x1500 
 +[20/02/2023 11:33:16] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist 
 +[20/02/2023 11:33:16] ssdk_switch_register[1642]:INFO:polling is selected 
 +[20/02/2023 11:33:16] regi_init[3409]:INFO:Initializing HPPE Done!! 
 +[20/02/2023 11:33:16] regi_init[3453]:INFO:qca-ssdk module init succeeded! 
 +[20/02/2023 11:33:16] tun: Universal TUN/TAP device driver, 1.6 
 +[20/02/2023 11:33:16] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com
 +[20/02/2023 11:33:16] EDMA ver 1 hw init 
 +[20/02/2023 11:33:16] EDMA HW Reset completed succesfully 
 +[20/02/2023 11:33:16] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) 
 +[20/02/2023 11:33:16] RxDesc:1 (15-15) RxFill:1 (7-7) 
 +[20/02/2023 11:33:16] GMAC2(ffffffc03ab81880) Invalid MAC- using 82:00:b3:cf:69:43 
 +[20/02/2023 11:33:16] GMAC3(ffffffc03ab85880) Invalid MAC@ - using aa:7b:52:7f:8a:bb 
 +[20/02/2023 11:33:16] GMAC4(ffffffc03ab89880) Invalid MAC@ - using 8a:2b:63:d7:e3:8e 
 +[20/02/2023 11:33:16] GMAC5(ffffffc03ab8d880) Invalid MAC@ - using 2e:19:30:c5:35:69 
 +[20/02/2023 11:33:16] GMAC6(ffffffc039879880) Invalid MAC@ - using 82:17:be:67:b5:cf 
 +[20/02/2023 11:33:16] ********************************************************** 
 +[20/02/2023 11:33:16] * NSS Data Plane driver 
 +[20/02/2023 11:33:16] ********************************************************** 
 +[20/02/2023 11:33:16] l2tp_core: L2TP core driver, V2.
 +[20/02/2023 11:33:16] l2tp_netlink: L2TP netlink interface 
 +[20/02/2023 11:33:16] nss_driver - fw of size 668348  bytes copied to load addr: 40000000, nss_id : 0 
 +[20/02/2023 11:33:16] Supported Frequencies - 
 +[20/02/2023 11:33:16] 748.8 MHz 1.4976 GHz 
 +[20/02/2023 11:33:16] 1.6896 GHz <1>  16.468855] 
 +[20/02/2023 11:33:16] ffffffbffc651600: meminfo init succeed 
 +[20/02/2023 11:33:16] node size 2 items 4 
 +[20/02/2023 11:33:16] memory: 40000000 1073741824 (avl 940281856) items 4 active_cores 2 
 +[20/02/2023 11:33:16] ffffffbffc651600: nss core 0 booted successfully 
 +[20/02/2023 11:33:16] nss_driver - fw of size 265248  bytes copied to load addr: 40800000, nss_id : 1 
 +[20/02/2023 11:33:16] Supported Frequencies - 
 +[20/02/2023 11:33:16] 748.8 MHz 1.4976 GHz 
 +[20/02/2023 11:33:16] 1.6896 GHz <1>[   16.531660] 
 +[20/02/2023 11:33:16] ffffffbffc658700: meminfo init succeed 
 +[20/02/2023 11:33:16] sit: IPv6 over IPv4 tunneling driver 
 +[20/02/2023 11:33:16] node size 2 items 4 
 +[20/02/2023 11:33:16] memory: 40000000 1073741824 (avl 940281856) items 4 active_cores 2 
 +[20/02/2023 11:33:16] ffffffbffc658700: nss core 1 booted successfully 
 +[20/02/2023 11:33:16] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. 
 +[20/02/2023 11:33:16] gre: GRE over IPv4 demultiplexor driver 
 +[20/02/2023 11:33:16] ip_gre: GRE over IPv4 tunneling driver 
 +[20/02/2023 11:33:16] ip6_gre: GRE over IPv6 tunneling driver 
 +[20/02/2023 11:33:16] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) 
 +[20/02/2023 11:33:16] QCA multicast snooping installed successfully 
 +[20/02/2023 11:33:16] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[20/02/2023 11:33:16] QCA Hy-Fi multicast installation successfully 
 +[20/02/2023 11:33:16] PPP generic driver version 2.4.2 
 +[20/02/2023 11:33:16] nss_lag_init[354]:LAG Manager Installed 
 +[20/02/2023 11:33:16] NET: Registered protocol family 24 
 +[20/02/2023 11:33:16] tntfs: module license 'Commercial. For support email support@tuxera.com.' taints kernel. 
 +[20/02/2023 11:33:16] Disabling lock debugging due to kernel taint 
 +[20/02/2023 11:33:16] Tuxera NTFS driver 3021.4.23.8 [Flags: R/W MODULE]. 
 +[20/02/2023 11:33:16] Built against headers 4.4.60 #26 SMP PREEMPT Wed Jul 17 13:35:43 CST 2019 arm64 
 +[20/02/2023 11:33:16] Running on kernel 4.4.60 #1 SMP PREEMPT Wed Sep 29 08:31:14 UTC 2021 aarch64 
 +[20/02/2023 11:33:16] <NSS-CRYPTO>:module loaded Build_ID - 09/29/21, 07:31:58 SoC=ipq807x_64 
 +[20/02/2023 11:33:16] cannot find nss-macsec0 node 
 +[20/02/2023 11:33:16] cannot find nss-macsec1 node 
 +[20/02/2023 11:33:16] cannot find nss-macsec2 node 
 +[20/02/2023 11:33:16] nss_macsec init success 
 +[20/02/2023 11:33:16] diag: IPC Logging disabled 
 +[20/02/2023 11:33:16] hidraw: raw HID events driver (C) Jiri Kosina 
 +[20/02/2023 11:33:16] u32 classifier 
 +[20/02/2023 11:33:16] input device check on 
 +[20/02/2023 11:33:16] Actions configured 
 +[20/02/2023 11:33:16] Mirror/redirect action on 
 +[20/02/2023 11:33:16] pktgen: Packet Generator for packet performance testingVersion: 2.75 
 +[20/02/2023 11:33:16] arp_tables: (C2002 David S. Miller 
 +[20/02/2023 11:33:16] Bluetooth: Core ver 2.21 
 +[20/02/2023 11:33:16] NET: Registered protocol family 31 
 +[20/02/2023 11:33:16] Bluetooth: HCI device and connection manager initialized 
 +[20/02/2023 11:33:16] Bluetooth: HCI socket layer initialized 
 +[20/02/2023 11:33:16] Bluetooth: L2CAP socket layer initialized 
 +[20/02/2023 11:33:16] Bluetooth: SCO socket layer initialized 
 +[20/02/2023 11:33:16] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
 +[20/02/2023 11:33:16] Bluetooth: BNEP filters: protocol multicast 
 +[20/02/2023 11:33:16] Bluetooth: BNEP socket layer initialized 
 +[20/02/2023 11:33:16] usbcore: registered new interface driver btusb 
 +[20/02/2023 11:33:16] Ebtables v2.0 registered 
 +[20/02/2023 11:33:16] Bluetooth: HCI UART driver ver 2.3 
 +[20/02/2023 11:33:16] Bluetooth: HCI UART protocol H4 registered 
 +[20/02/2023 11:33:16] Bluetooth: HCI UART protocol BCSP registered 
 +[20/02/2023 11:33:16] Bluetooth: HCI UART protocol ATH3K registered 
 +[20/02/2023 11:33:16] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 
 +[20/02/2023 11:33:16] Bluetooth: HIDP socket layer initialized 
 +[20/02/2023 11:33:16] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[20/02/2023 11:33:16] l2tp_ppp: PPPoL2TP kernel driver, V2.0 
 +[20/02/2023 11:33:16] nf_conntrack_rtsp v0.6.21 loading 
 +[20/02/2023 11:33:17] nf_nat_rtsp v0.6.21 loading 
 +[20/02/2023 11:33:17] PPP MPPE Compression module registered 
 +[20/02/2023 11:33:17] PPTP driver version 0.8.5 
 +[20/02/2023 11:33:17] Bluetooth: RFCOMM TTY layer initialized 
 +[20/02/2023 11:33:17] Bluetooth: RFCOMM socket layer initialized 
 +[20/02/2023 11:33:17] Bluetooth: RFCOMM ver 1.11 
 +[20/02/2023 11:33:17] usbcore: registered new interface driver usblp 
 +[20/02/2023 11:33:17] xt_time: kernel timezone is -0000 
 +[20/02/2023 11:33:17] random: nonblocking pool is initialized 
 +[20/02/2023 11:33:21] configuring additional NSS pbufs 
 +[20/02/2023 11:33:21] additional pbufs of size 9003008 got added to NSS 
 +[20/02/2023 11:33:21] __mm_init_module 
 +[20/02/2023 11:33:21] qdf_dbg_mask value is invalid 
 +[20/02/2023 11:33:21] Using the default module debug levels instead 
 +[20/02/2023 11:33:21] qdf_print_ctrl_register: Allocated print control object 0 
 +[20/02/2023 11:33:21] 
 +[20/02/2023 11:33:21] MINIDUMP VA .bss start=ffffffbffcc23700 module=qdf 
 +[20/02/2023 11:33:21] wlan: [2161:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50 
 +[20/02/2023 11:33:21] 
 +[20/02/2023 11:33:21] MINIDUMP VA .bss start=ffffffbffcea4080 module=umac 
 +[20/02/2023 11:33:21] 
 +[20/02/2023 11:33:21] MINIDUMP VA .bss start=ffffffbffd047580 module=qca_ol=======ol_if_register_wifi3_0========== 
 +[20/02/2023 11:33:21] wlan: [2186:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd11bd00 
 +[20/02/2023 11:33:21] remoteproc remoteproc0: powering up q6v5-m3 
 +[20/02/2023 11:33:21] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284 
 +[20/02/2023 11:33:21] Sanity check passed for M3 image 
 +[20/02/2023 11:33:21] remoteproc remoteproc0: remote processor q6v5-m3 is now up 
 +[20/02/2023 11:33:21] wlan: [2186:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2 
 +[20/02/2023 11:33:21] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done 
 +[20/02/2023 11:33:21] remoteproc remoteproc1: powering up q6v5-wcss 
 +[20/02/2023 11:33:21] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668 
 +[20/02/2023 11:33:21] Sanity check passed for the image 
 +[20/02/2023 11:33:22] glink_core_link_up glink is up 
 +[20/02/2023 11:33:22] glink_xprt_open_event 
 +[20/02/2023 11:33:22] Subsystem error monitoring/handling services are up 
 +[20/02/2023 11:33:22] remoteproc remoteproc1: remote processor q6v5-wcss is now up 
 +[20/02/2023 11:33:22] wlan: [2186:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3 
 +[20/02/2023 11:33:22] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled 
 +[20/02/2023 11:33:22] cnss: QMI WLFW service connected, state: 0x1 
 +[20/02/2023 11:33:22] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc87c2c8 
 +[20/02/2023 11:33:22] cnss: device_id : 0xfffe mem mode : [0] 
 +[20/02/2023 11:33:22] cnss: No board_id entry in device tree 
 +[20/02/2023 11:33:22] cnss: BDF location : 0x000000004b0c0000 
 +[20/02/2023 11:33:22] cnss: BDF IPQ8074/bdwlan.bin size 131072 
 +[20/02/2023 11:33:22] cnss: BDF download response , result: 0, err: 0x0 
 +[20/02/2023 11:33:22] cnss: per device BDF location : 0x000000004b0e0000 
 +[20/02/2023 11:33:22] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 
 +[20/02/2023 11:33:22] cnss: BDF download response , result: 0, err: 0x0 
 +[20/02/2023 11:33:22] wlan: [2186:I:ANY] pld_ahb_wlan_enable: 681: cnss_mode: Cold boot calibration 
 +[20/02/2023 11:33:23] Coldboot calibration wait started 
 +[20/02/2023 11:33:23] Coldboot calibration wait ended 
 +[20/02/2023 11:33:23] wlan: [2186:I:ANY] ol_ath_do_cold_boot_calibration: 467: Coldboot calib successful: radio_id 0x65534 
 +[20/02/2023 11:33:23] cnss: QMI WLFW service disconnected, state: 0x7 
 +[20/02/2023 11:33:23] wlan: [2186:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0:  (Atheros/multi-bss
 +[20/02/2023 11:33:23] 
 +[20/02/2023 11:33:23] MINIDUMP VA .bss start=ffffffbffd11c180 module=wifi_3_0 
 +[20/02/2023 11:33:23wlan: [2193:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 0 
 +[20/02/2023 11:33:23] remoteproc remoteproc1: stopped remote processor q6v5-wcss 
 +[20/02/2023 11:33:23] wlan: [2193:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 1 
 +[20/02/2023 11:33:23] glink_core_link_down glink is down 
 +[20/02/2023 11:33:23] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done 
 +[20/02/2023 11:33:23] remoteproc remoteproc0: stopped remote processor q6v5-m3 
 +[20/02/2023 11:33:23] glink_xprt_close_event 
 +[20/02/2023 11:33:23] 
 +[20/02/2023 11:33:23] MINIDUMP VA .bss start=ffffffbffd23a580 module=qca_ol 
 +[20/02/2023 11:33:23] =======ol_if_register_wifi3_0========== 
 +[20/02/2023 11:33:23] wlan: [2198:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd30ed00 
 +[20/02/2023 11:33:23] remoteproc remoteproc0: powering up q6v5-m3 
 +[20/02/2023 11:33:23] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdtsize 284 
 +[20/02/2023 11:33:23] Sanity check passed for M3 image 
 +[20/02/2023 11:33:23] remoteproc remoteproc0: remote processor q6v5-m3 is now up 
 +[20/02/2023 11:33:23] wlan: [2198:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2 
 +[20/02/2023 11:33:23] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done 
 +[20/02/2023 11:33:23] remoteproc remoteproc1: powering up q6v5-wcss 
 +[20/02/2023 11:33:23] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668 
 +[20/02/2023 11:33:23] Sanity check passed for the image 
 +[20/02/2023 11:33:24] glink_core_link_up glink is up 
 +[20/02/2023 11:33:24] glink_xprt_open_event 
 +[20/02/2023 11:33:24] Subsystem error monitoring/handling services are up 
 +[20/02/2023 11:33:24] remoteproc remoteproc1: remote processor q6v5-wcss is now up 
 +[20/02/2023 11:33:24] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3 
 +[20/02/2023 11:33:24] cnss: QMI WLFW service connected, state: 0x1 
 +[20/02/2023 11:33:24] cnss: device_id : 0xfffe mem mode : [0
 +[20/02/2023 11:33:24] cnss: No board_id entry in device tree 
 +[20/02/2023 11:33:24] cnss: BDF location : 0x000000004b0c0000 
 +[20/02/2023 11:33:24] cnss: BDF IPQ8074/bdwlan.bin size 131072 
 +[20/02/2023 11:33:24] cnss: BDF download response , result: 0, err: 0x0 
 +[20/02/2023 11:33:24] cnss: per device BDF location : 0x000000004b0e0000 
 +[20/02/2023 11:33:24] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 
 +[20/02/2023 11:33:24] cnss: BDF download response , result: 0, err: 0x0 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 0 created on pipe 4 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] __ol_ath_attach: 3064: Allocated soc ffffffc034d80880 
 +[20/02/2023 11:33:24] btcoex_support 0 wlan_prio_gpio 0 
 +[20/02/2023 11:33:24] wlan: [2198:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 Out of range [8, 100]; Using 1000 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] osif_nss_wifi_soc_setup: 186: nss-wifili:#1 register wifili function for soc 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 3 Target Type 18 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] __ol_ath_attach: 3278: dev name soc0 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] ol_ath_soc_attach: 6591: WMI attached. wmi_handle ffffffc035093000 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] htc_wmi_init: 5958: htc_wmi_init() HT Create . ffffffc03627f000 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] htc_wmi_init: 5965: htc_wmi_init() Skipping BMI Done. 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] htc_wmi_init: 6022: [htc_wmi_init:6022] host_enable 0 nss_nwifi_offload 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] ol_target_init_complete: 6140: CDP soc attach success 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] ol_target_init_complete: 6147: Soc attach success NSS config 0 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc03627f000, ep 2, value 1 
 +[20/02/2023 11:33:24] wlan: [2198:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc03627f000, ep 3, value 1 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_atf_config_enable: 605: Airtime Fairness: num_peers=1058 num_active_peer=0 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] HE_CAP Info = 1a08010d 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] Num HW modes = 2 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] Num PHY = 3 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] Preferred HW Mode = 1 Num Radios = 2 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_add_11ax_modes: 1406:  phy_id = 0 wireless modes = f97f9001 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_add_11ax_modes: 1406:  phy_id = 1 wireless modes = 680680c 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_add_11ax_modes: 1406:  phy_id = 2 wireless modes = 397f9001 
 +[20/02/2023 11:33:24] wlan: [167:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 1 
 +[20/02/2023 11:33:24] wlan: [167:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx: 0 
 +[20/02/2023 11:33:24] wlan: [167:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs: 1 
 +[20/02/2023 11:33:24] wlan: [167:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 362: Do not allocate DFS object for 2G, pdev_id = 1 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success 
 +[20/02/2023 11:33:24] wlan: [167:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success 
 +[20/02/2023 11:33:24] wlan: [167:I:ANY] copy_fw_abi_version_tlv: 6258: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 
 +[20/02/2023 11:33:25] wlan: [167:I:ANY] dp_peer_map_attach_wifi3: 9983: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [167:I:ANY] ready_extract_init_status_tlv: 8002: ready_extract_init_status_tlv:
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_connect_htc: 1219: WMI is ready 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 37 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_soc_attach: 6665: connect HTC 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_soc_attach: 6666: bypasswmi : 0 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_soc_attach: 6741: ol_ath_soc_attach() UMAC attach . 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ath_lowi_if_netlink_init: 177: ath_lowi_if_netlink_init LOWI Netlink successfully created 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi0 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_attach: 7206: interface_id 0 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_regdmn_init: 6895:  phy id = 0 Modes supported 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_regdmn_init: 6902:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_regdmn_init: 6910:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6000 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = f97f9001 before update 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = f97f9001 after update 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_update_ext_caps: 1842: 11ax 5G supported case 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed 
 +[20/02/2023 11:33:25] ieee80211_cbs_init CBS Inited 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] acfg_attach: 3457: acfg_attach: 3457: Netlink socket created:ffffffc035090800 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats:
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] ol_ath_pdev_attach: 7542: Set global_ic[1], ptr:ffffffbffcea43e8 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc036f0ce88) Enabling DBDC Repeater 1 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc036f0ce88) is_primary 1 
 +[20/02/2023 11:33:25] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_attach: 7660: Pdev = 0 Number of peers = 529 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11903: twt enabled. 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 1828: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan  36 blocked from cfg 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] osif_wrap_attach: 239: osif wrap attached 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] osif_wrap_attach: 247:  Wrap Attached: Wrap_com =ffffffc035090000 ic->ic_wrap_com=ffffffc035090000 &wrap_com->wc_devt=ffffffc035090000 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi0 features 41 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] wlan_cfg80211_init: 9619: Number of 5G channels: 25 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc033b00880, wdev: 0xffffffc033b10a70, wiphy: 0xffffffc0350edaa0, netdev: 0xffffffc033b00000 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi1 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_attach: 7206: interface_id 1 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_regdmn_init: 6895:  phy id = 1 Modes supported 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_regdmn_init: 6902:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_regdmn_init: 6910:  Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = 680680c before update 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = 680680c after update 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_update_ext_caps: 1850: 11ax 2G supported case 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed 
 +[20/02/2023 11:33:25] ieee80211_cbs_init CBS Inited 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] acfg_attach: 3432: Offload using existing sock ffffffc035090800 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats: 1 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] ol_ath_pdev_attach: 7542: Set global_ic[2], ptr:ffffffbffcea43e8 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc0304eda08) Enabling DBDC Repeater 1 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc0304eda08) is_primary 0 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pdev_attach: 7660: Pdev = 1 Number of peers = 529 
 +[20/02/2023 11:33:25] wlan: [2198:E:WMI] event handler already registered 0x6019 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 1828: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan  36 blocked from cfg 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] osif_wrap_attach: 239: osif wrap attached 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] osif_wrap_attach: 247:  Wrap Attached: Wrap_com =ffffffc029d56800 ic->ic_wrap_com=ffffffc029d56800 &wrap_com->wc_devt=ffffffc029d56800 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi1 features 41 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] wlan_cfg80211_init: 9607: Number of 2G channels: 11 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc033b40880, wdev: 0xffffffc033b50a70, wiphy: 0xffffffc029b002a0, netdev: 0xffffffc033b40000 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] wlan_pdev_operation: 729: num_radios=1, wifi_radios[0].sc = ffffffc033b00880_radio_type = 2 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] wlan_pdev_operation: 729: num_radios=2, wifi_radios[1].sc = ffffffc033b40880_radio_type = 2 
 +[20/02/2023 11:33:25] wlan: [2198:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0:  (Atheros/multi-bss) 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] MINIDUMP VA .bss start=ffffffbffd30f180 module=wifi_3_0 
 +[20/02/2023 11:33:25] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:25] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11903: twt enabled. 
 +[20/02/2023 11:33:25] 
 +[20/02/2023 11:33:25] wlan: [2202:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd3a8558 
 +[20/02/2023 11:33:25] wlan: [2202:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd3a8558 
 +[20/02/2023 11:33:25] wlan: [2202:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0:  (Atheros/multi-bss) 
 +[20/02/2023 11:33:26] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! 
 +[20/02/2023 11:33:26] ntfs: (device sdb1): parse_options(): Option iocharset is deprecatedPlease use option nls=<charsetname> in the future. 
 +[20/02/2023 11:33:26] tntfs warning (device sdb1, pid 2519): parse_options(): Disabling default option utf8 and enabling option nls=utf8.  This means that Emojis and other extended Unicode characters in filenames will not work.  Do not specify nls=utf8 option to fix this. 
 +[20/02/2023 11:33:26] tntfs info (device sdb1, pid 2519): ntfs_fill_super(): fail_safe is enabled. 
 +[20/02/2023 11:33:26] tntfs info (device sdb1, pid 2545): ntfs_fill_super(): fail_safe is enabled. 
 +[20/02/2023 11:33:41] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: commit=1 
 +[20/02/2023 11:33:41] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: commit=1 
 +[20/02/2023 11:33:42] ECM init 
 +[20/02/2023 11:33:42] ECM database jhash random seed: 0xa550eda5 
 +[20/02/2023 11:33:42] ECM init complete 
 +[20/02/2023 11:33:42] device eth0 entered promiscuous mode 
 +[20/02/2023 11:33:42] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready 
 +[20/02/2023 11:33:42] device eth1 entered promiscuous mode 
 +[20/02/2023 11:33:42] br-lan: port 2(eth1) entered forwarding state 
 +[20/02/2023 11:33:42] br-lan: port 2(eth1) entered forwarding state 
 +[20/02/2023 11:33:42] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[20/02/2023 11:33:42] device eth2 entered promiscuous mode 
 +[20/02/2023 11:33:42] br-lan: port 3(eth2) entered forwarding state 
 +[20/02/2023 11:33:42] br-lan: port 3(eth2) entered forwarding state 
 +[20/02/2023 11:33:43] device eth3 entered promiscuous mode 
 +[20/02/2023 11:33:43] br-lan: port 4(eth3) entered forwarding state 
 +[20/02/2023 11:33:43] br-lan: port 4(eth3) entered forwarding state 
 +[20/02/2023 11:33:43] device eth5 entered promiscuous mode 
 +[20/02/2023 11:33:43] br-lan: port 5(eth5) entered forwarding state 
 +[20/02/2023 11:33:43] br-lan: port 5(eth5) entered forwarding state 
 +[20/02/2023 11:33:43] eth0: PHY Link up speed: 1000 
 +[20/02/2023 11:33:43] eth3: PHY Link up speed: 1000 
 +[20/02/2023 11:33:43] br-lan: port 1(eth0) entered forwarding state 
 +[20/02/2023 11:33:43] br-lan: port 1(eth0) entered forwarding state 
 +[20/02/2023 11:33:43] br-lan: port 2(eth1) entered disabled state 
 +[20/02/2023 11:33:43] br-lan: port 3(eth2) entered disabled state 
 +[20/02/2023 11:33:43] __mc_netlink_receive: Disable bridge snooping! 
 +[20/02/2023 11:33:43] br-lan: port 5(eth5) entered disabled state 
 +[20/02/2023 11:33:43] __mc_netlink_receive: Disable bridge snooping! 
 +[20/02/2023 11:33:44] wlan: [3822:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 13 
 +[20/02/2023 11:33:44] wlan: [3822:I:ANY] number of channels: 2G = 13 5G = 0 
 +[20/02/2023 11:33:44] wlan: [3837:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :bc:cf:4f:ff:1b:a2 ret: 0 
 +[20/02/2023 11:33:44] wlan: [3839:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 
 +[20/02/2023 11:33:44] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc0304eda08) Enabling DBDC Repeater 0 
 +[20/02/2023 11:33:44] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:44] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:44] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:44] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Disconnect_timeout value: 10 
 +[20/02/2023 11:33:44] wlan: [0:I:ANY] ol_ath_set_config_param: 2215: Reconfiguration_timeout value:60 
 +[20/02/2023 11:33:45] br-lan: port 4(eth3) entered forwarding state 
 +[20/02/2023 11:33:45] br-lan: port 1(eth0) entered forwarding state 
 +[20/02/2023 11:33:45] wlan: [4180:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 19 
 +[20/02/2023 11:33:45] wlan: [4180:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58 
 +[20/02/2023 11:33:45] wlan: [4180:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=106 
 +[20/02/2023 11:33:45] wlan: [4180:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=122 
 +[20/02/2023 11:33:45] wlan: [4180:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 19 
 +[20/02/2023 11:33:45] wlan: [4180:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58 
 +[20/02/2023 11:33:45] wlan: [4180:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=106 
 +[20/02/2023 11:33:45] wlan: [4180:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=122 
 +[20/02/2023 11:33:45] wlan: [4180:I:ANY] number of channels: 2G = 0 5G = 19 
 +[20/02/2023 11:33:45] wlan: [3522:I:ANY] ol_acfg_handle_wifi_ioctl: 417: ol_acfg_handle_wifi_ioctl: req->cmd=75 not valid for radio interface, it's for VAP 
 +[20/02/2023 11:33:45] wlan: [4198:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :bc:cf:4f:ff:1b:a3 ret: 0 
 +[20/02/2023 11:33:45] wlan: [4200:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 
 +[20/02/2023 11:33:45] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc036f0ce88) Enabling DBDC Repeater 0 
 +[20/02/2023 11:33:45] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:45] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:45] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[20/02/2023 11:33:45] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Disconnect_timeout value: 10 
 +[20/02/2023 11:33:45] wlan: [0:I:ANY] ol_ath_set_config_param: 2215: Reconfiguration_timeout value:60 
 +[20/02/2023 11:33:48] eth0: PHY Link is down 
 +[20/02/2023 11:33:48] eth3: PHY Link is down 
 +[20/02/2023 11:33:48] br-lan: port 1(eth0) entered disabled state 
 +[20/02/2023 11:33:48] br-lan: port 4(eth3) entered disabled state 
 +[20/02/2023 11:33:50] eth0: PHY Link up speed: 1000 
 +[20/02/2023 11:33:50] br-lan: port 1(eth0) entered forwarding state 
 +[20/02/2023 11:33:50] br-lan: port 1(eth0) entered forwarding state 
 +[20/02/2023 11:33:50] eth3: PHY Link up speed: 1000 
 +[20/02/2023 11:33:50] br-lan: port 4(eth3) entered forwarding state 
 +[20/02/2023 11:33:50] br-lan: port 4(eth3) entered forwarding state 
 +[20/02/2023 11:33:52] br-lan: port 1(eth0) entered forwarding state 
 +[20/02/2023 11:33:52] br-lan: port 4(eth3) entered forwarding state 
 +[20/02/2023 11:33:53] __mc_netlink_receive: Disable bridge snooping! 
 +[20/02/2023 11:33:59] Bluetooth: Out-of-order packet arrived, got 1 expected 0 
 +[20/02/2023 11:34:03] __mc_netlink_receive: Enable bridge snooping! 
 +</code></WRAP>
  
-===== Notes =====+<tabbox printenv><WRAP><code> 
 +baudrate=115200 
 +bootargs=console=ttyMSM0,115200n8 
 +bootcmd=bootipq 
 +bootdelay=
 +boxid=xxxxxxxxxxxxxxxx 
 +countrycode=E1 
 +defenv=sf probe && sf erase 0x600000 0x10000 
 +ethact=eth0 
 +ethaddr=BC:CF:4F:XX:XX:X0 
 +fdt_high=0x4A400000 
 +fdtcontroladdr=4a9674b0 
 +flash_type=8 
 +fwimg=norplusemmc-ipq807x_64-single.100ABSK3C0.imgroot@NBG7815:~# fw_printenv 
 +baudrate=115200 
 +bootargs=console=ttyMSM0,115200n8 
 +bootcmd=bootipq 
 +bootdelay=2 
 +boxid=xxxxxxxxxxxxxxxx 
 +countrycode=E1 
 +defenv=sf probe && sf erase 0x600000 0x10000 
 +ethact=eth0 
 +ethaddr=BC:CF:4F:XX:XX:X0 
 +fdt_high=0x4A400000 
 +fdtcontroladdr=4a9674b0 
 +flash_type=8 
 +fwimg=norplusemmc-ipq807x_64-single.100ABSK3C0.img 
 +ipaddr=192.168.1.1 
 +ledB=run ledinit && i2c mw 0x40 0x18 0xff && i2c mw 0x40 0x1b 0xff && i2c mw 0x40 0x1e 0xff 
 +ledG=run ledinit && i2c mw 0x40 0x17 0xff && i2c mw 0x40 0x1a 0xff && i2c mw 0x40 0x1d 0xff 
 +ledR=run ledinit && i2c mw 0x40 0x16 0xff && i2c mw 0x40 0x19 0xff && i2c mw 0x40 0x1c 0xff 
 +ledRblink=i2c mw 0x40 0x16 0xff && i2c mw 0x40 0x19 0xff && i2c mw 0x40 0x1c 0xff && sleep 1 && i2c mw 0x40 0x16 0x00 && i2c mw 0x40 0x19 0x00 && i2c mw 0x40 0x1c 0x00 && sleep 1 
 +ledallon=run ledinit && mw 0x44000000 ffffffff 3 && i2c write 0x44000000 0x32 0x16 9 && i2c write 0x44000000 0x35 0x16 9 
 +ledinit=i2c dev 0 && i2c probe && i2c mw 0x40 0x0 0x40 && mw 0x44000000 a0a0a0a0 3 && i2c write 0x44000000 0x40 0x7 9 && mw 0x44000000 00000000 3 && i2c write 0x44000000 0x40 0x16 9 
 +machid=80100f1 
 +netmask=255.255.255.0 
 +partno=NBG7815-EU0102F 
 +preboot=dcache off 
 +progimg=aq_load_fw 8 && tftpboot 0x44000000 $fwimg && imgaddr=0x44000000 && source $imgaddr:script && reset 
 +progzyxelimg=setenv machid 80100f1 && setenv bootcmd bootipq && saveenv && aq_load_fw 8 && tftpboot 0x44000000 $fwimg && imgaddr=0x44000000 && source $imgaddr:script && reset 
 +serialnum=xxxxxxxxxxxxxxxx 
 +serverip=192.168.1.99 
 +soc_version_major=2 
 +soc_version_minor=0 
 +stderr=serial@78B3000 
 +stdin=serial@78B3000 
 +stdout=serial@78B3000 
 +readonly=ro 
 +ipaddr=192.168.1.1 
 +ledB=run ledinit && i2c mw 0x40 0x18 0xff && i2c mw 0x40 0x1b 0xff && i2c mw 0x40 0x1e 0xff 
 +ledG=run ledinit && i2c mw 0x40 0x17 0xff && i2c mw 0x40 0x1a 0xff && i2c mw 0x40 0x1d 0xff 
 +ledR=run ledinit && i2c mw 0x40 0x16 0xff && i2c mw 0x40 0x19 0xff && i2c mw 0x40 0x1c 0xff 
 +ledRblink=i2c mw 0x40 0x16 0xff && i2c mw 0x40 0x19 0xff && i2c mw 0x40 0x1c 0xff && sleep 1 && i2c mw 0x40 0x16 0x00 && i2c mw 0x40 0x19 0x00 && i2c mw 0x40 0x1c 0x00 && sleep 1 
 +ledallon=run ledinit && mw 0x44000000 ffffffff 3 && i2c write 0x44000000 0x32 0x16 9 && i2c write 0x44000000 0x35 0x16 9 
 +ledinit=i2c dev 0 && i2c probe && i2c mw 0x40 0x0 0x40 && mw 0x44000000 a0a0a0a0 3 && i2c write 0x44000000 0x40 0x7 9 && mw 0x44000000 00000000 3 && i2c write 0x44000000 0x40 0x16 9 
 +machid=80100f1 
 +netmask=255.255.255.0 
 +partno=NBG7815-EU0102F 
 +preboot=dcache off 
 +progimg=aq_load_fw 8 && tftpboot 0x44000000 $fwimg && imgaddr=0x44000000 && source $imgaddr:script && reset 
 +progzyxelimg=setenv machid 80100f1 && setenv bootcmd bootipq && saveenv && aq_load_fw 8 && tftpboot 0x44000000 $fwimg && imgaddr=0x44000000 && source $imgaddr:script && reset 
 +serialnum=xxxxxxxxxxxxxxxx 
 +serverip=192.168.1.99 
 +soc_version_major=2 
 +soc_version_minor=0 
 +stderr=serial@78B3000 
 +stdin=serial@78B3000 
 +stdout=serial@78B3000 
 +readonly=ro 
 +</code></WRAP></tabbox>
  
 ===== Tags ===== ===== Tags =====
-[[meta:tags|How to add tags]] +{{tag>IPQ807x IPQ8074A QCA8081 QCA8075 QCN5024 QCN5054 AQR107 1024ram 4096flash 4096eMMC USB3.1 Bluetooth GigabitEthernet 2.5GigabitEthernet 10GigabitEthernet Wifi-6 AX-6000 802.11abgn 802.11ac 802.11ax serial fan]}}
-{{tag>IPQ8074A 1024RAM 4096Flash 1USB USB3}}+
  • Last modified: 2024/12/13 12:10
  • by pwned