Xiaomi AX3600

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Not supported.

At the time there is an experimental fork with support for this device.

Potential issues:

  • Ath11k memory: With some (older) firmware versions, the ath11k driver needed for the main wireless radios uses a lot of memory when there are few stations connected and low bandwidth traffic flowing. Getting a recent version using the link immediately above will resolve this problem.
CPU Ram Flash WLAN2.4 WLAN5.0 WLAN6.0
Qualcomm Atheros IPQ8071A @ 1.4 GHz 512 Mib256 MiB b/g/n an/ac ax

To flash this image there is a need for SSH access to the OEM firmware, it isnt't possible for now to flash openwrt from the stock FW with the OpenWRT Factory image.

SSH Access

  1. Setup the router admin password (quick way is using the mobile setup app)
  2. Login to the router web interface using the password set using the app and get the value of “stok=” from the URL
  3. Think of a password for SSH logins (8+ chars long, no special chars)
Manual method

You need to use the following URL(s) in order to enable SSH access. Before that please:

  • Replace <STOK> with the stok value gained above
  • Replace <PASSWORD> with the password generated above

nvram set ssh_en=1

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=gallifrey&user_id=doctor&ssid=-h%0Anvram%20set%20ssh%5Fen%3D1%0A

nvram commit

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=gallifrey&user_id=doctor&ssid=-h%0Anvram%20commit%0A

cp /etc/init.d/dropbear /etc/init.d/dropbear_backup

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=gallifrey&user_id=doctor&ssid=-h%0Acp%20%2Fetc%2Finit.d%2Fdropbear%20%2Fetc%2Finit.d%2Fdropbear_backup%0A

sed -i '/flg_ssh.*release/ { :a; N; /fi/! ba };/return 0/d' /etc/init.d/dropbear

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=gallifrey&user_id=doctor&ssid=-h%0Ased%20-i%20'%2Fflg_ssh.*release%2F%20%7B%20%3Aa%3B%20N%3B%20%2Ffi%2F!%20ba%20%7D%3B%2Freturn%200%2Fd'%20%2Fetc%2Finit.d%2Fdropbear%0A

echo -e “<PASSWORD>/n<PASSWORD>” | passwd root

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=gallifrey&user_id=doctor&ssid=-h%0Aecho%20-e%20%27<PASSWORD>%5Cn<PASSWORD>%27%20%7C%20passwd%20root%0A

/etc/init.d/dropbear enable

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=gallifrey&user_id=doctor&ssid=-h%0A%2Fetc%2Finit.d%2Fdropbear%20enable%0A

/etc/init.d/dropbear start

http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev?bssid=doctor&user_id=doctor&ssid=-h%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A

Now you should be able to login to root@192.168.31.1 via ssh using the password above.

Scripted method

Bash method

Bash script

Bash script

rawurlencode() {
  local string="${1}"
  local strlen=${#string}
  local encoded=""
  local pos c o

  for (( pos=0 ; pos<strlen ; pos++ )); do
     c=${string:$pos:1}
     case "$c" in
        [-_.~a-zA-Z0-9] ) o="${c}" ;;
        * )               printf -v o '%%%02x' "'$c"
     esac
     encoded+="${o}"
  done
  echo "${encoded}"    # You can either set a return variable (FASTER)
  REPLY="${encoded}"   #+or echo the result (EASIER)... or both... :p
}

xiaomiCmd() {
    parsed=$(rawurlencode "$1")
    url="http://192.168.31.1/cgi-bin/luci/;stok=$stok/api/misystem/set_config_iotdev?bssid=redmi&user_id=doctor&ssid=-h%0A$parsed%0A"
    echo $url
    curl "$url"
    echo
}

enableSsh() {
    xiaomiCmd "nvram set ssh_en=1;nvram commit"
    xiaomiCmd "sed -i '/flg_ssh.*release/ { :a; N; /fi/! ba };/return 0/d' /etc/init.d/dropbear"
    xiaomiCmd "echo -e '$password\n$password' | passwd root"
    xiaomiCmd "/etc/init.d/dropbear enable;/etc/init.d/dropbear start"
}
echo your have to enter stok and password variables before running enableSsh:
echo 'stok=<STOK>'
echo 'password=<PASSWORD>'
echo enableSsh

JavaScript method

This is to be used in the browser console (Press F12)

Javascript script

Javascript script

function getSTOK() {
    let match = location.href.match(/;stok=(.*?)\//);
    if (!match) {
        return null;
    }
    return match[1];
}

function execute(stok, command) {
    command = encodeURIComponent(command);
    let path = `/cgi-bin/luci/;stok=${stok}/api/misystem/set_config_iotdev?bssid=SteelyWing&user_id=SteelyWing&ssid=-h%0A${command}%0A`;
    console.log(path);
    return fetch(new Request(location.origin + path));
}

function enableSSH() {
    stok = getSTOK();
    if (!stok) {
        console.error('stok not found in URL');
        return;
    }
    console.log(`stok = "${stok}"`);

    password = prompt('Input new SSH password');
    if (!password) {
        console.error('You must input password');
        return;
    }

    execute(stok,
`
nvram set ssh_en=1
nvram commit
sed -i 's/channel=.*/channel=\\"debug\\"/g' /etc/init.d/dropbear
/etc/init.d/dropbear start
`
    )
        .then((response) => response.text())
        .then((text) => console.log(text));
    console.log('New SSH password: ' + password);
    execute(stok, `echo -e "${password}\\n${password}" | passwd root`)
        .then((response) => response.text())
        .then((text) => console.log(text));
}

enableSSH();

Flashing OpenWrt

After getting SSH access, you will now be able to flash a previously compiled image (by you since for the time being there are no official automated images):

  1. Copy the OpenWrt generated image (the openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-factory.ubi one) to the /tmp folder over SCP for example
  2. This is a device with a dual partition scheme layout, so you need to find out which one is running with the command
    nvram get flag_boot_rootfs
  3. The output should be the partition number where the current system was booted from
    mtd12: 023c0000 00020000 "rootfs"  - is the 0
    mtd13: 023c0000 00020000 "rootfs_1"  - is the 1
  4. Since you can't flash the current partition because it's locked you can only flash the opposite one by replacing the mtd number in the following command
    ubiformat /dev/mtd12 -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-factory.ubi -s 2048 -O 2048
  5. After flashing the image you need to configure the u-boot to boot from the recently flashed image by replacing the 1 with the number of the opposite partition (1 or 0) and running the commands:
    nvram set flag_last_success=0 # if you've flashed mtd12, or "1" if mtd13
    nvram set flag_boot_rootfs=0 # same

    If you don't care about flag_last_success and flag_boot_rootfs variables just set flag_ota_reboot=1! It will boot to the other partition on each reboot (not only the next one!):

    nvram set flag_ota_reboot=1
  6. save the changes and reboot
    nvram commit
    reboot
  7. After the router boots it should be running the OpenWrt image, but now you need to flash the other partition to be able to sysupgrade without soft-bricking your router by replacing the mtd number with the one of the opposite partition with the command
    ubiformat /dev/mtd13 -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-factory.ubi -s 2048 -O 2048
  8. After this you can flash future OpenWrt images/upgrades as usual

Sysupgrade does work, but for now there is currently a know issue where you need to flash the device two or more times (via sysupgrade) for the firmware to be upgraded, it should be fixed in the official firmware

In openwrt the commands to check and change the boot partition are different:

fw_printenv flag_boot_rootfs
fw_setenv flag_boot_rootfs 0 # if you've flashed mtd12 or "1" if mtd13
fw_setenv flag_last_success 0 # same

The AX3600 can be recovered from a soft-brick with TFTP. The flow is:

  • The router boots and asks for an IP address on the LAN ports via DHCP
  • The TFTP server assigns an IP address to the router
  • The router then connects to the TFTP server (where your DHCP server listen, e.g.: 192.168.31.100) and tries to download a file named with the IP address given by the DHCP server converted to hexadecimal.

Because of this quirk we will have to configure the tftp server to assign only one IP and we will set the file name to the only IP address it can receive.

For Windows you can use tftpd64 and on Linux you can use dnsmasq. These are the steps to do it for Linux (this can be adapted to the tftpd64's graphical interface very easily):

  • Create a folder somewhere to place your firmware for the tftp server and download the OEM firmware (the file name is a very important part):
    mkdir -p /tmp/tftp
    wget https://cdn.cnbj1.fds.api.mi-img.com/xiaoqiang/rom/r3600/miwifi_r3600_firmware_5da25_1.0.17.bin -O /tmp/tftp/C0A81F02.img
  • Set a static address on your PC to serve the firmware from:
    sudo ip address flush dev <adapter name>
    sudo ip address add 192.168.31.100/24 dev <adapter name>
  • Run the server with the following command:
    sudo dnsmasq --no-daemon --listen-address=192.168.31.100 --bind-interfaces --dhcp-range=192.168.31.2,192.168.31.2 --enable-tftp --tftp-root=/tmp/tftp
  • Keep reset button pressed and power on your ax3600
    • Keep it pressed until you see the system led blinking orange
  • When the device finished loading the firmware, the led starts blink. Wait for until blue led get solid!
    • It Might take some time for the Led go get to solid blue
    • If the recovery doesn't accept the downloaded file the led switches to solid white - if this is the case, restart the recovery process with other file
    • If the led is blinking blue led it means the device was flashed successfully and can be restarted
  • Put your interface back to DHCP mode and start again with breaking your device
Architecture ARMv8
Vendor Qualcomm
Bootloader U-Boot (R3600)
System-On-Chip Qualcomm IPQ8071A
CPU/Speed firmware up to 1.4GHz
Flash-Chip W29N02GZSIBA or GD9FS2G8F2A (see notes)
Flash size 256 MiB (see notes)
RAM 512 MiB
Wireless QCN5024 2.4GHz 802.11bgn
Ethernet 10/100/1000 Mbit/s w/ vlan support
Switch Qualcomm Atheros IPQ8075
Serial Yes

1) It is possible, there is even more variations of Flash Chips soldered on it. I (mva) just found that my AX3600 has another chip in comparsion to data collected by previous redactors). Needs more investigation.

2) Despite AX3600 have 256M NAND flash chip, stock partitioning uses less than half of it (~113M). Probably, Xiaomi did that for firmware unification purpose (using AX6 as less common denominator, as it has only 128M flash). So, as @robimarko's OpenWRT branch for now (@19.11.2021) don't touch stock partitioning scheme neither for AX3600, nor for AX9000, it is also true for it.

2.1) Also, stock partitioning assumes ~35M size for each of `rootfs` MTD partitions, and ~30M for `overlay` MTD partition (and even with that, mounted `/overlay` partition somewhy only have size of 15M)

Flash layout in OEM FW:

OEM FW Layout

OEM FW Layout

root@XiaoQiang:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "0:SBL1"
mtd1: 00100000 00020000 "0:MIBIB"
mtd2: 00300000 00020000 "0:QSEE"
mtd3: 00080000 00020000 "0:DEVCFG"
mtd4: 00080000 00020000 "0:RPM"
mtd5: 00080000 00020000 "0:CDT"
mtd6: 00080000 00020000 "0:APPSBLENV"
mtd7: 00100000 00020000 "0:APPSBL"
mtd8: 00080000 00020000 "0:ART"
mtd9: 00080000 00020000 "bdata"
mtd10: 00080000 00020000 "crash"
mtd11: 00080000 00020000 "crash_syslog"
mtd12: 023c0000 00020000 "rootfs"
mtd13: 023c0000 00020000 "rootfs_1"
mtd14: 01ec0000 00020000 "overlay"
mtd15: 00080000 00020000 "rsvd0"
mtd16: 0041e000 0001f000 "kernel"
mtd17: 0160a000 0001f000 "ubi_rootfs"
mtd18: 01876000 0001f000 "data"

Flash layout in QSDK FW:

QSDK FW Layout

QSDK FW Layout

root@OpenWrt:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "0:SBL1"
mtd1: 00100000 00020000 "0:MIBIB"
mtd2: 00300000 00020000 "0:QSEE"
mtd3: 00080000 00020000 "0:DEVCFG"
mtd4: 00080000 00020000 "0:RPM"
mtd5: 00080000 00020000 "0:CDT"
mtd6: 00080000 00020000 "0:APPSBLENV"
mtd7: 00100000 00020000 "0:APPSBL"
mtd8: 00080000 00020000 "0:ART"
mtd9: 00080000 00020000 "bdata"
mtd10: 00080000 00020000 "crash"
mtd11: 00080000 00020000 "crash_syslog"
mtd12: 023c0000 00020000 "rootfs"
mtd13: 08000000 00020000 "rootfs_1"
mtd14: 01ec0000 00020000 "overlay"
mtd15: 00080000 00020000 "rsvd0"
mtd16: 00900000 00020000 "0:WIFIFW"
mtd17: 00554000 0001f000 "kernel"
mtd18: 019cb000 0001f000 "ubi_rootfs"
mtd19: 0578d000 0001f000 "rootfs_data"
mtd20: 0022e000 0001f000 "wifi_fw"

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

VCC RX GND TX J2 1 2 3 4
Serial connection parameters
for Xiaomi AX3600
115200, 8N1

no ttl pin voltage 1.8V

Router side RX is disabled by default, see Notes

Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147 S - IMAGE_VARIANT_STRING=HAACANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x000002e5 B - 203 - PBL, Start B - 2740 - bootable_media_detect_entry, Start B - 3449 - bootable_media_detect_success, Start B - 3453 - elf_loader_entry, Start B - 6122 - auth_hash_seg_entry, Start B - 6365 - auth_hash_seg_exit, Start B - 68611 - elf_segs_hash_verify_entry, Start B - 131308 - PBL, End B - 146522 - SBL1, Start B - 199897 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4 B - 206546 - pm_device_init, Start B - 331230 - PM_SET_VAL:Skip D - 123982 - pm_device_init, Delta B - 333487 - pm_driver_init, Start D - 5337 - pm_driver_init, Delta B - 339922 - clock_init, Start D - 2135 - clock_init, Delta B - 344009 - boot_flash_init, Start D - 11773 - boot_flash_init, Delta B - 359473 - boot_config_data_table_init, Start D - 3202 - boot_config_data_table_init, Delta - (575 Bytes) B - 366976 - Boot Setting : 0x00000600 B - 370910 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:16 B - 377864 - sbl1_ddr_set_params, Start B - 381677 - CPR configuration: 0x300 B - 385154 - cpr_init, Start B - 387929 - Rail:0 Mode: 5 Voltage: 816000 B - 393084 - CL CPR settled at 768000mV B - 395920 - Rail:1 Mode: 5 Voltage: 880000 B - 400190 - Rail:1 Mode: 7 Voltage: 912000 D - 16470 - cpr_init, Delta B - 406992 - Pre_DDR_clock_init, Start B - 411018 - Pre_DDR_clock_init, End B - 414403 - DDR Type : PCDDR3 B - 420107 - do ddr sanity test, Start D - 1037 - do ddr sanity test, Delta B - 424865 - DDR: Start of HAL DDR Boot Training B - 429592 - DDR: End of HAL DDR Boot Training B - 435265 - DDR: Checksum to be stored on flash is 563280603 B - 445574 - Image Load, Start D - 224114 - QSEE Image Loaded, Delta - (1373936 Bytes) B - 669780 - Image Load, Start D - 61 - SEC Image Loaded, Delta - (0 Bytes) B - 677466 - Image Load, Start D - 10705 - DEVCFG Image Loaded, Delta - (26004 Bytes) B - 688263 - Image Load, Start D - 25254 - RPM Image Loaded, Delta - (105964 Bytes) B - 713578 - Image Load, Start D - 96593 - APPSBL Image Loaded, Delta - (590068 Bytes) B - 810324 - QSEE Execution, Start D - 91 - QSEE Execution, Delta B - 816119 - USB D+ check, Start D - 30 - USB D+ check, Delta B - 822524 - SBL1, End D - 678289 - SBL1, Delta S - Flash Throughput, 6751 KB/s (2096547 Bytes, 310514 us) S - DDR Frequency, 466 MHz S - Core 0 Frequency, 800 MHz U-Boot 2016.01 (Feb 19 2020 - 10:39:20 +0000), Build: jenkins-r3600_ota_publish-25 DRAM: smem ram ptable found: ver: 1 len: 4 512 MiB NAND: ONFI device found ID = 1590aaef Vendor = ef Device = aa SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 256 MiB MMC: sdhci: Node Not found, skipping initialization ## Error: flags type check failure for "ethaddr" <= ""00:AA:BB:CC:DD:10"" (type: m) himport_r: can't insert "ethaddr="00:AA:BB:CC:DD:10"" into hash table PCI Link Intialized PCI1 is not defined in the device tree In: serial@78B3000 Out: serial@78B3000 Err: serial@78B3000 machid: 8010010 MMC Device 0 not found eth5 MAC Address from ART is not valid write phy_id=1, reg(0x8074):0x0670 write phy_id=2, reg(0x8074):0x0670 write phy_id=3, reg(0x8074):0x0670 write phy_id=4, reg(0x8074):0x0670 bootwait is off, bootdelay=5 Hit any key to stop autoboot: 0 trigger button release! boot from rootfs 0 miwifi: check crash in rmem ! ubi0: attaching mtd1 ubi0: scanning is finished ubi0: attached mtd1 (name "mtd=0", size 35 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 220023969 ubi0: available PEBs: 26, total reserved PEBs: 260, PEBs reserved for bad PEB handling: 40 Read 0 bytes from volume kernel to 44000000 No size specified -> Using max size (4317184) Could not find PCI in device tree ## Loading kernel from FIT Image at 44000000 ... Using 'config@ac04' configuration Trying 'kernel@1' kernel subimage Description: ARM64 OpenWrt Linux-4.4.60 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 3957922 Bytes = 3.8 MiB Architecture: AArch64 OS: Linux Load Address: 0x41080000 Entry Point: 0x41080000 Hash algo: crc32 Hash value: 6040bba3 Hash algo: sha1 Hash value: c137157ca381de8ac3883b105ec1553876d4e349 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@ac04' configuration Trying 'fdt@ac04' fdt subimage Description: ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x443da1bc Data Size: 79565 Bytes = 77.7 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 6f1349bd Hash algo: sha1 Hash value: eb53fbb8407f6451d8789ab8b0addd335134a552 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x443da1bc Uncompressing Kernel Image ... OK Loading Device Tree to 4a3e9000, end 4a3ff6cc ... OK Using machid 0x8010010 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.60 (jenkins@153e9c33daea) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 unknown) ) #0 SMP PREEMPT Fri May 8 10:35:38 2020 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 14 pages/cpu @ffffffc01ef5c000 s19096 r8192 d30056 u57344 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105840 [ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] software IO TLB [mem 0x5fe57000-0x5fe97000] (0MB) mapped at [ffffffc01ee57000-ffffffc01ee96fff] [ 0.000000] Memory: 402204K/430080K available (5491K kernel code, 654K rwdata, 2796K rodata, 224K init, 405K bss, 27876K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc0800000 ( 7 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc01f000000 ( 496 MB) [ 0.000000] .init : 0xffffffc00089a000 - 0xffffffc0008d2000 ( 224 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0008997f4 ( 8294 KB) [ 0.000000] .data : 0xffffffc0008e1000 - 0xffffffc000984800 ( 654 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000396] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000408] pid_max: default: 32768 minimum: 301 [ 0.000496] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000505] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.001036] Initializing cgroup subsys io [ 0.001052] Initializing cgroup subsys memory [ 0.001083] Initializing cgroup subsys devices [ 0.001098] Initializing cgroup subsys freezer [ 0.001109] Initializing cgroup subsys net_cls [ 0.001119] Initializing cgroup subsys pids [ 0.001367] EFI services will not be available. [ 0.001392] ASID allocator initialised with 65536 entries [ 0.051825] MSM Memory Dump base table set up [ 0.051850] MSM Memory Dump apps data table set up [ 0.090120] Detected VIPT I-cache on CPU1 [ 0.090164] CPU1: Booted secondary processor [410fd034] [ 0.120106] Detected VIPT I-cache on CPU2 [ 0.120133] CPU2: Booted secondary processor [410fd034] [ 0.150133] Detected VIPT I-cache on CPU3 [ 0.150159] CPU3: Booted secondary processor [410fd034] [ 0.150212] Brought up 4 CPUs [ 0.150237] SMP: Total of 4 processors activated. [ 0.150247] CPU: All CPU(s) started at EL1 [ 0.150270] alternatives: patching kernel code [ 0.167061] DMI not present or invalid. [ 0.167312] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.167336] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.167561] pinctrl core: initialized pinctrl subsystem [ 0.168504] NET: Registered protocol family 16 [ 0.190061] cpuidle: using governor ladder [ 0.220078] cpuidle: using governor menu [ 0.220220] vdso: 2 pages (1 code @ ffffffc0008e9000, 1 data @ ffffffc0008e8000) [ 0.220362] DMA: preallocated 256 KiB pool for atomic allocations [ 0.220456] CPU: unavail, SoC Version: 2.0 [ 0.220493] <CORE> glink_init: IPC Logging Disabled [ 0.220891] IPC logging disabled [ 0.220898] IPC logging disabled [ 0.220902] IPC logging disabled [ 0.220907] IPC logging disabled [ 0.220911] IPC logging disabled [ 0.223601] Soc version is not 1, changing clock offsets [ 0.234993] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.237011] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.239187] msm_rpm_dev_probe: APSS-RPM communication over GLINK [ 0.240075] sps:sps is ready. [ 0.249857] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 2 [ 0.256344] pps_core: LinuxPPS API ver. 1 registered [ 0.256356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.256383] PTP clock support registered [ 0.256533] dmi: Firmware registration failed. [ 0.257815] Advanced Linux Sound Architecture Driver Initialized. [ 0.258455] clocksource: Switched to clocksource arch_sys_counter [ 0.261701] NET: Registered protocol family 2 [ 0.262293] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.262354] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.262451] TCP: Hash tables configured (established 4096 bind 4096) [ 0.262503] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.262526] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.262695] NET: Registered protocol family 1 [ 0.270308] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.270326] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.273628] io scheduler noop registered [ 0.273644] io scheduler deadline registered (default) [ 0.275687] 20000000.pci supply vdda not found, using dummy regulator [ 0.275767] 20000000.pci supply vdda_phy not found, using dummy regulator [ 0.275802] 20000000.pci supply vdda_refclk not found, using dummy regulator [ 0.276346] PCI host bridge /soc/pci@20000000 ranges: [ 0.276374] IO 0x20200000..0x202fffff -> 0x20200000 [ 0.276388] MEM 0x20300000..0x20ffffff -> 0x20300000 [ 0.411911] qcom-pcie 20000000.pci: link up [ 0.412058] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 0.412072] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.412085] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x20200000-0x202fffff]) [ 0.412099] pci_bus 0000:00: root bus resource [mem 0x20300000-0x20ffffff] [ 0.414035] pci 0000:00:00.0: BAR 8: assigned [mem 0x20300000-0x205fffff] [ 0.414050] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref] [ 0.414062] pci 0000:00:00.0: BAR 0: assigned [mem 0x20800000-0x20800fff] [ 0.414075] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.414091] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [ 0.414186] pci 0000:01:00.0: BAR 6: assigned [mem 0x20300000-0x2030ffff pref] [ 0.414197] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.414207] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.414219] pci 0000:00:00.0: bridge window [mem 0x20300000-0x205fffff] [ 0.414230] pci 0000:00:00.0: bridge window [mem 0x20600000-0x207fffff 64bit pref] [ 0.419757] NET: Registered protocol family 27 [ 0.419770] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled [ 0.419783] qmi_log_init: IPC Logging disabled [ 0.419789] qmi_log_init: IPC Logging disabled [ 0.419874] msm_rpm_log_probe: OK [ 0.420461] msm-dcc b3000.dcc: DCC XPU is not specified [ 0.420699] msm-dcc b3000.dcc: DCC SRAM dump setup failed [ 0.420728] msm-dcc b3000.dcc: jiffies_64: 0xffff8af9, cntvct_64: 0x5100c5d [ 0.420739] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80003cc004) [ 0.420750] msm-dcc b3000.dcc: gcnt_lo: 0x05100e0d(0xffffff80003cc000) [ 0.421285] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 0.421919] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 0.421954] msm_serial 78b3000.serial: uartclk = 3686400 [ 0.421988] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM [ 0.422005] msm_serial: console setup on port #0 [ 1.235017] console [ttyMSM0] enabled [ 1.240002] msm_serial 78b1000.serial: msm_serial: detected port #1 [ 1.243269] msm_serial 78b1000.serial: uartclk = 19200000 [ 1.249356] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM [ 1.255190] msm_serial: driver initialized [ 1.263669] msm_serial_hsl_init: driver initialized [ 1.276430] brd: module loaded [ 1.277110] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.279866] m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff [ 1.286617] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa [ 1.291965] nand: Winbond W29N02GZ [ 1.298422] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.301757] 16 ofpart partitions found on MTD device qcom_nand.0 [ 1.309205] Creating 16 MTD partitions on "qcom_nand.0": [ 1.315356] 0x000000000000-0x000000100000 : "0:SBL1" [ 1.322174] 0x000000100000-0x000000200000 : "0:MIBIB" [ 1.326989] 0x000000200000-0x000000500000 : "0:QSEE" [ 1.333487] 0x000000500000-0x000000580000 : "0:DEVCFG" [ 1.336588] 0x000000580000-0x000000600000 : "0:RPM" [ 1.341541] 0x000000600000-0x000000680000 : "0:CDT" [ 1.346316] 0x000000680000-0x000000700000 : "0:APPSBLENV" [ 1.351193] 0x000000700000-0x000000800000 : "0:APPSBL" [ 1.357106] 0x000000800000-0x000000880000 : "0:ART" [ 1.361767] 0x000000880000-0x000000900000 : "bdata" [ 1.366522] 0x000000900000-0x000000980000 : "crash" [ 1.371394] 0x000000980000-0x000000a00000 : "crash_syslog" [ 1.376242] 0x000000a00000-0x000002dc0000 : "rootfs" [ 1.408550] mtd: device 12 (rootfs) set to be root filesystem [ 1.408811] mtdsplit: no squashfs found in "rootfs" [ 1.413274] 0x000002dc0000-0x000005180000 : "rootfs_1" [ 1.445652] 0x000005180000-0x000007040000 : "overlay" [ 1.469243] 0x000007040000-0x0000070c0000 : "rsvd0" [ 1.470760] spmi spmi-0: PMIC Arb Version-2 (0x20010000) [ 1.475762] libphy: Fixed MDIO Bus: probed [ 1.699150] qca-mdio 90000.mdio: Could not find phy-reset-gpio [ 1.699256] libphy: qca_mdio: probed [ 1.705089] qca-mdio 90000.mdio: qca-mdio driver was registered [ 1.707773] Unable to create IPC log context! [ 1.713608] cnss: Platform driver probed successfully. [ 1.717969] Skip QCA8074V1 in V2 platform [ 1.722927] cnss_genl: genl_register_family fail: -17 [ 1.726867] cnss: CNSS genl init failed -17 [ 1.731947] cnss: Platform driver probed successfully. [ 1.736042] i2c /dev entries driver [ 1.747728] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.748181] sdhci: Secure Digital Host Controller Interface driver [ 1.755283] sdhci: Copyright(c) Pierre Ossman [ 1.761231] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.766301] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 1.771442] ICE IRQ = 81 [ 1.779951] [ 1.779951] Version Rollback Feature Disabled [ 1.782886] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000 [ 1.787872] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000 [ 1.805154] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000 [ 1.821039] sps:BAM 0x0000000008b04000 is registered.[ 1.828794] DEV CI test message [ 1.833478] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group [ 1.836230] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group [ 1.846727] remoteproc remoteproc0: q6v5-m3 is available [ 1.857135] SPMI VADC - Min ch: 0 Max ch: 15 [ 1.863946] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 [ 1.866600] coresight-csr 6001000.csr: CSR initialized [ 1.874049] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 [ 1.879009] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 [ 1.886536] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 [ 1.893927] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 [ 1.901310] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 [ 1.908680] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 [ 1.916047] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 [ 1.923446] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 [ 1.930824] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 [ 1.938189] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 [ 1.945571] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 [ 1.952956] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 [ 1.960331] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 [ 1.967704] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 [ 1.975090] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 [ 1.982464] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 [ 1.989850] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 [ 1.997374] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 [ 2.004729] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 [ 2.012139] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 [ 2.019555] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 [ 2.026916] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 [ 2.033981] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 [ 2.051103] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 [ 2.066948] sps:BAM 0x0000000006044000 is registered.[ 2.074580] coresight-tmc 6028000.tmc: TMC initialized [ 2.079400] coresight-tmc 6027000.tmc: TMC initialized [ 2.084530] coresight-funnel 6021000.funnel: FUNNEL initialized [ 2.089589] coresight-funnel 6100000.funnel: FUNNEL initialized [ 2.095382] coresight-funnel 6120000.funnel: FUNNEL initialized [ 2.101312] coresight-funnel 61a1000.funnel: FUNNEL initialized [ 2.107718] coresight-etm4x 619c000.etm: ETM 4.0 initialized [ 2.113428] coresight-etm4x 619d000.etm: ETM 4.0 initialized [ 2.119366] coresight-etm4x 619e000.etm: ETM 4.0 initialized [ 2.125038] coresight-etm4x 619f000.etm: ETM 4.0 initialized [ 2.130317] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized [ 2.136051] coresight-stm 6002000.stm: STM initialized [ 2.144601] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 [ 2.148487] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 2.158737] Netfilter messages via NETLINK v0.30. [ 2.163683] ip_set: protocol 6 [ 2.168965] NET: Registered protocol family 10 [ 2.171994] NET: Registered protocol family 17 [ 2.175666] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.180115] Bridge firewalling registered [ 2.192827] 8021q: 802.1Q VLAN Support v1.8 [ 2.198339] <CORE> glink_core_register_transport: IPC Logging disabled [ 2.200835] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 2 [ 2.207451] pmd9655_s3: supplied by e-smps1-reg [ 2.214532] msm_glink_smem_native_xprt rx fifo not found [ 2.219192] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 2.224587] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 2.230939] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 2.238587] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 2.246078] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 2.255241] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV [ 2.262189] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 832000 uV [ 2.272217] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 684, quot_offset[ 7]= 0 [ 2.281985] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 927, quot_offset[ 7]= 240 [ 2.292928] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 2.305031] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz [ 2.310646] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz [ 2.317887] DEV CI test message [ 2.326742] remoteproc remoteproc1: q6v5-wcss is available [ 2.329498] ubi0: attaching mtd12 [ 2.477528] ubi0: scanning is finished [ 2.482777] ubi0: attached mtd12 (name "rootfs", size 35 MiB) [ 2.482798] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.487491] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.494272] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.501127] ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0 [ 2.507890] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.514148] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 220023969 [ 2.521184] ubi0: available PEBs: 26, total reserved PEBs: 260, PEBs reserved for bad PEB handling: 40 [ 2.530131] ubi0: background thread "ubi_bgt0d" started, PID 118 [ 2.540209] hctosys: unable to open rtc device (rtc0) [ 2.566709] crash_kernel_init, res rsvd1, 50700000, 400000, /reserved-memory/rsvd1@50700000 [ 2.566744] mtd dev crash, size 0x80000 [ 2.574561] crash_kernel_init, crash init, res->start:50700000,crash_buf:0xffffff8001c80000,crash_buf_len 0x7ffe4, crash_avail_sz 0x80000 [ 2.578299] Crash kernel dumper registered ok! [ 2.591003] crash_syslog_init, res rsvd2, 50b00000, 400000, /reserved-memory/rsvd2@50b00000 [ 2.595480] mtd dev crash_syslog, size 0x80000 [ 2.604554] crash_syslog_init, crash init, crash_buf_len 0x3ffe4, crash_avail_sz 0x40000 [ 2.608780] Crash syslog dumper register ok! [ 2.617214] pmd9655_ldo11: disabling [ 2.621940] ALSA device list: [ 2.625153] No soundcards found. [ 2.630327] VFS: Mounted root (squashfs filesystem) readonly on device 31:17. [ 2.631464] Freeing unused kernel memory: 224K (ffffffc00089a000 - ffffffc0008d2000) [ 2.638581] Freeing alternatives memory: 44K (ffffffc0008d2000 - ffffffc0008dd000) [ 2.935965] init: Console is alive [ 2.936084] init: - watchdog - [ 3.048419] random: nonblocking pool is initialized [ 3.966038] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.980412] usbcore: registered new interface driver usbfs [ 3.980467] usbcore: registered new interface driver hub [ 3.984848] usbcore: registered new device driver usb [ 3.991654] Button Hotplug driver version 0.4.1 [ 3.997614] SCSI subsystem initialized [ 4.001518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.003754] ehci-platform: EHCI generic platform driver [ 4.222582] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.222622] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.227114] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 [ 4.234591] xhci-hcd xhci-hcd.0.auto: irq 190, io mem 0x08a00000 [ 4.243590] hub 1-0:1.0: USB hub found [ 4.249461] hub 1-0:1.0: 1 port detected [ 4.253190] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.257081] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.262446] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.270223] hub 2-0:1.0: USB hub found [ 4.278265] hub 2-0:1.0: 1 port detected [ 4.284576] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.287594] init: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 7.680458] mount_root: mounting /dev/root [ 7.730303] ubi1: attaching mtd14 [ 7.854413] ubi1: scanning is finished [ 7.876596] ubi1: attached mtd14 (name "overlay", size 30 MiB) [ 7.876624] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 7.881331] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 7.888175] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 7.895041] ubi1: good PEBs: 246, bad PEBs: 0, corrupted PEBs: 0 [ 7.901809] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 7.908055] ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1111721790 [ 7.915098] ubi1: available PEBs: 0, total reserved PEBs: 246, PEBs reserved for bad PEB handling: 40 [ 7.924395] ubi1: background thread "ubi_bgt1d" started, PID 189 UBI device number 1, total 246 LEBs (31236096 bytes, 29.7 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) ubimkvol: error!: UBI device does not have free logical eraseblo[ 7.953594] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 200 cks [ 7.979654] UBIFS (ubi1:0): recovery needed [ 8.071751] UBIFS (ubi1:0): recovery completed [ 8.071839] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data" [ 8.075080] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.082303] UBIFS (ubi1:0): FS size: 24379392 bytes (23 MiB, 192 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs) [ 8.092280] UBIFS (ubi1:0): reserved for root: 1151498 bytes (1124 KiB) [ 8.102517] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 5BA61A41-3F75-459D-BEB7-8973B32A335B, small LPT model 2116+0 records in 2116+0 records out 2116 bytes (2.1KB) copied, 0.006012 seconds, 343.7KB/s 131072+0 records in 131072+0 records out 131072 bytes (128.0KB) copied, 0.325282 se[ 8.480127] urandom-seed: Seed file not found (/etc/urandom.seed) conds, 393.5KB/s [ 8.876202] procd: - early - [ 8.876249] procd: - watchdog - [ 9.458700] procd: - watchdog - [ 9.458822] procd: - ubus - [ 9.511548] procd: - init - Please press Enter to activate this console. /etc/rc.d/S00sysfixtime: Mon May 11 00:58:56 UTC 2020 /etc/rc.d/S00wifi_fw_mount: 2116+0 records in /etc/rc.d/S00wifi_fw_mount: 2116+0 records out /etc/rc.d/S00wifi_fw_mount: 2116 bytes (2.1KB) copied, 0.006097 seconds, 338.9KB/s /etc/rc.d/S00wifi_fw_mount: 131072+0 records in /etc/rc.d/S00wifi_fw_mount: 131072+0 records out /etc/rc.d/S00wifi_fw_mount: 131072 bytes (128.0KB) copied, 0.331817 seconds, 385.8KB/s /etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/mem failed: Resource busy /etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/net_cls failed: Resource busy /etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/cpu failed: Resource busy /etc/rc.d/S09qca-iot: sh: write error: Invalid argument /etc/rc.d/S09qca-iot: /etc/rc.common: line 154: can't create /sys/class/gpio/gpio/direction: nonexistent directory /etc/rc.d/S09qca-iot: /etc/rc.common: line 154: can't create /sys/class/gpio/gpio/value: nonexistent directory /etc/rc.d/S09qca-iot: /etc/rc.common: line 154: can't create /sys/class/gpio/gpio/value: nonexistent directory /usr/bin/iotd[305]: Started iot daemon [ 10.063008] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.661655] nf_conntrack version 0.5.0 (3144 buckets, 40000 max) [ 10.661684] xqnss: extend init success! [ 10.674178] cfg80211: World regulatory domain updated: [ 10.674204] cfg80211: DFS Master region: unset [ 10.678201] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.682814] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.692374] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.700189] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 10.709570] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.717537] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 10.727291] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.736738] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 10.744804] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 10.833723] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1 [ 10.837430] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist! [ 10.844338] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus [ 10.850505] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000 [ 10.857615] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000 [ 10.864907] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0 [ 10.871333] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xff [ 10.876885] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xff [ 10.882639] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist! [ 10.888452] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC 8c:53:c3:d6:6a:3f [ 10.894268] ssdk_dt_parse_intf_mac[683]:INFO:dp2 MAC 8c:53:c3:b2:64:85 [ 10.900787] ssdk_dt_parse_intf_mac[683]:INFO:dp3 MAC 8c:53:c3:d6:6a:3f [ 10.907290] ssdk_dt_parse_intf_mac[683]:INFO:dp4 MAC 8c:53:c3:d6:6a:3f [ 10.913800] ssdk_dt_parse_intf_mac[683]:INFO:dp5 MAC 8c:53:c3:d6:6a:3f [ 10.920335] ssdk_plat_init start [ 11.000532] ssdk_ppe_clock_init[464]:INFO:ppe and uniphy clock init successfully! [ 11.003692] ssdk_probe[1884]:INFO:ess_rst doesn't exist! [ 11.010926] HPPE initializing... [ 11.012264] malibu_phy_api_ops_init[2851]:INFO:qca probe malibu phy driver succeeded! [ 11.023336] regi_init[3411]:INFO:Initializing HPPE!! [ 11.238458] ssdk_ppe_reset_init[738]:INFO:ppe reset successfully! [ 11.245643] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96 [ 11.248918] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing [ 11.464565] ssdk_switch_register[1623]:INFO:Chip version 0x1500 [ 11.467546] qca_link_polling_select[1285]:INFO:link-polling-required node does not exist [ 11.473784] ssdk_switch_register[1648]:INFO:polling is selected [ 11.481515] regi_init[3415]:INFO:Initializing HPPE Done!! [ 11.486434] regi_init[3459]:INFO:qca-ssdk module init succeeded! [ 11.494086] tun: Universal TUN/TAP device driver, 1.6 [ 11.494881] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 11.502756] EDMA ver 1 hw init [ 11.506125] EDMA HW Reset completed succesfully [ 11.509041] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 11.513372] RxDesc:1 (15-15) RxFill:1 (7-7) [ 11.522971] ********************************************************** [ 11.522998] * NSS Data Plane driver [ 11.529436] ********************************************************** [ 11.536165] l2tp_core: L2TP core driver, V2.0 [ 11.540085] l2tp_netlink: L2TP netlink interface [ 11.701293] nss_driver - fw of size 667888 bytes copied to load addr: 40000000, nss_id : 0 [ 11.703242] Supported Frequencies - [ 11.708481] 187.2 MHz 748.8 MHz [ 11.714422] 1.4976 GHz [ 11.715380] [ 11.717894] ffffffbffc62b680: meminfo init succeed [ 11.756285] node size 2 # items 4 [ 11.756313] memory: 40000000 536870912 (avl 435531776) items 4 active_cores 2 [ 11.758606] ffffffbffc62b680: nss core 0 booted successfully [ 11.762223] nss_driver - fw of size 265296 bytes copied to load addr: 40800000, nss_id : 1 [ 11.763041] Supported Frequencies - [ 11.763042] 187.2 MHz [ 11.763043] 748.8 MHz [ 11.763043] 1.4976 GHz [ 11.763044] [ 11.763219] ffffffbffc632780: meminfo init succeed [ 11.792338] node size 2 # items 4 [ 11.796507] memory: 40000000 536870912 (avl 435646464) items 4 active_cores 2 [ 11.799921] ffffffbffc632780: nss core 1 booted successfully [ 11.808386] sit: IPv6 over IPv4 tunneling driver [ 11.815115] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. [ 11.818046] gre: GRE over IPv4 demultiplexor driver [ 11.826049] ip_gre: GRE over IPv4 tunneling driver [ 11.831501] ip6_gre: GRE over IPv6 tunneling driver [ 11.837654] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 11.842332] QCA multicast snooping installed successfully [ 11.848389] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.700598] QCA Hy-Fi multicast installation successfully [ 14.368995] nss_lag_init[354]:LAG Manager Installed [ 14.930104] PPP generic driver version 2.4.2 [ 14.930834] NET: Registered protocol family 24 [ 15.259852] <NSS-CRYPTO>:module loaded Build_ID - 05/08/20, 17:25:24 SoC=ipq807x_64 [ 15.480350] cannot find nss-macsec0 node [ 15.480415] cannot find nss-macsec1 node [ 15.483360] cannot find nss-macsec2 node [ 15.487238] nss_macsec init success [ 15.851683] diag: IPC Logging disabled [ 18.599097] u32 classifier [ 18.599116] input device check on [ 18.600685] Actions configured [ 19.079063] Mirror/redirect action on [ 24.059806] ipaccount: ifname [lo] event[5] [ 24.059832] ipaccount: ifname [miireg] event[5] [ 24.062793] ipaccount: ifname [eth0] event[5] [ 24.067302] ipaccount: ifname [eth1] event[5] [ 24.071839] ipaccount: ifname [eth2] event[5] [ 24.076155] ipaccount: ifname [eth3] event[5] [ 24.080505] ipaccount: ifname [eth4] event[5] [ 24.084836] ipaccount: ifname [ip6tnl0] event[5] [ 24.089184] ipaccount: ifname [sit0] event[5] [ 24.093864] ipaccount: ifname [gre0] event[5] [ 24.098120] ipaccount: ifname [gretap0] event[5] [ 24.102467] ipaccount: ifname [ip6gre0] event[5] [ 24.107146] ipaccount: ifname [bond0] event[5] [ 24.111754] ipaccount: ifname [teql0] event[5] [ 24.320891] fuse init (API version 7.23) [ 24.541716] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.544144] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 24.813230] PPP MPPE Compression module registered [ 24.814247] PPTP driver version 0.8.5 [ 24.821025] ipt: xt_cgroup_MARK installed ok. [ 24.831769] xt_time: kernel timezone is -0000 [ 24.841205] kmodloader: done loading kernel modules from /etc/modules.d/* /etc/rc.d/S10boot: uci: Entry not found /etc/rc.d/S10boot: uci: Entry not found /etc/rc.d/S10boot: uci: Entry not found [ 25.282052] ipaccount: ifname [bond0] event[11] /etc/rc.d/S15qca-wpa-supplicant: Successfully initialized wpa_supplicant /etc/rc.d/S16qca-ssdk: /etc/rc.d/S16qca-ssdk: starting /etc/rc.d/S19dnsmasq: cp: can't stat '/etc/dnsmasq.d/*': No such file or directory /etc/rc.d/S19dnsmasq: sh: out of range /etc/rc.d/S19dnsmasq: sh: out of range /etc/rc.d/S19firewall: /etc/rc.common: line 1: /usr/sbin/firewall.webinitrdr: not found [ 27.603607] ECM init [ 27.603663] ECM database jhash random seed: 0xf744a757 [ 27.605894] qcaecm: register ecm_nss_ipv4_post_routing_hook() [ 27.610027] ECM init complete /etc/rc.d/S19qca-nss-ecm: net.bridge.bridge-nf-call-ip6tables = 1 /etc/rc.d/S19qca-nss-ecm: net.bridge.bridge-nf-call-iptables = 1 /etc/rc.d/S19qca-nss-ecm: dev.nss.general.redirect = 1 /etc/rc.d/S21nginx: start fcgi-cgi by spawn-fcgi. /etc/rc.d/S21nginx: start nginx ok. lbd: stopping daemon /etc/init.d/network: Command failed: Not found /etc/init.d/network: killall: iface-mgr: no process killed [ 28.235695] ipaccount: ifname [br-lan] event[16] [ 28.236612] ipaccount: ifname [br-lan] event[5] [ 28.240223] ipaccount: ifname [eth2] event[13] [ 28.244725] ipaccount: ifname [eth2] event[1] [ 28.250788] ipaccount: ifname [eth2] event[20] [ 28.252773] ipaccount: ifname [eth2] event[26] [ 28.258041] ipaccount: ifname [eth2] event[21] [ 28.261592] ipaccount: ifname [eth2] event[11] [ 28.266054] device eth2 entered promiscuous mode [ 28.270791] ipaccount: ifname [br-lan] event[11] [ 28.275626] ipaccount: ifname [br-lan] event[8] [ 28.279817] ipaccount: ifname [eth2] event[27] [ 28.284441] ipaccount: ifname [br-lan] event[8] [ 28.288532] ipaccount: ifname [br-lan] event[13] [ 28.292797] br-lan: port 1(eth2) entered forwarding state [ 28.297674] br-lan: port 1(eth2) entered forwarding state [ 28.303184] ipaccount: ifname [br-lan] event[1] /etc/init.d/network: killall: acfg_tool: no process killed /etc[ 28.312746] ipaccount: ifname [eth3] event[13] [ 28.319168] ipaccount: ifname [eth3] event[1] [ 28.326438] ipaccount: ifname [eth3] event[20] [ 28.327328] ipaccount: ifname [eth3] event[26] [ 28.334731] ipaccount: ifname [eth3] event[21] [ 28.336128] ipaccount: ifname [eth3] event[11] [ 28.342017] device eth3 entered promiscuous mode [ 28.348788] br-lan: port 2(eth3) entered forwarding state [ 28.349556] br-lan: port 2(eth3) entered forwarding state [ 28.355079] ipaccount: ifname [eth3] event[27] [ 28.362040] ipaccount: ifname [eth4] event[13] /init.d/network: /sbin/wifi: eval: line 1: /usr/sbin/acfg_tool: [ 28.369623] ipaccount: ifname [eth4] event[1] [ 28.375367] ipaccount: ifname [eth4] event[20] [ 28.379291] ipaccount: ifname [eth4] event[26] [ 28.383683] ipaccount: ifname [eth4] event[21] [ 28.387902] ipaccount: ifname [eth4] event[11] [ 28.392414] device eth4 entered promiscuous mode [ 28.396774] br-lan: port 3(eth4) entered forwarding state [ 28.401444] br-lan: port 3(eth4) entered forwarding state [ 28.406942] ipaccount: ifname [eth4] event[27] [ 28.413346] ipaccount: ifname [eth1] event[13] [ 28.417226] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.421077] ipaccount: ifname [eth1] event[1] [ 28.427258] ipaccount: ifname [lo] event[13] [ 28.431613] ipaccount: ifname [lo] event[1] not found qcawificfg80211 disable radio wifi0 qcawificfg80211 disable radio wifi1 qcawificfg80211 disable radio wifi2 /etc/rc.d/S49messagingagent.sh: start messagingagent ok. /etc/init.d/network: device: wifi0 vifs: cfg023579 /etc/init.d/network: device: wifi1 vifs: cfg043579 /etc/init.d/network: device: wifi2 vifs: cfg063579 /etc/init.d/network: killall: acfg_tool: no process killed /etc/init.d/network: /sbin/wifi: eval: line 1: /usr/sbin/acfg_tool: not found qcawificfg80211: enable radio wifi0 /etc/init.d/network: cp: omitting directory '/cfg/default/internal' /etc/rc.d/S51cp_preinstall_plugins.sh: ls: /usr/share/datacenter/appdata/notuninstallable/app_infos: No such file or directory /etc/init.d/network: cat: can't open '/lib/wifi/wifi_nss_hk_olnum': No such file or d[ 28.853804] configuring additional NSS pbufs irectory /etc/init.d/network: sh: 3: unknown operand [ 28.869300] additional pbufs of size 3100672 got added to NSS [ 28.896498] mem_manager: module license 'unspecified' taints kernel. [ 28.896530] Disabling lock debugging due to kernel taint [ 28.904144] __mm_init_module [ 28.930097] qdf_dbg_mask value is invalid [ 28.930126] Using the default module debug levels instead [ 28.933087] qdf_print_ctrl_register: Allocated print control object 0 [ 28.938605] MINIDUMP VA .bss start=ffffffbffce5af00 module=qdf [ 29.248947] br-lan: port 1(eth2) entered disabled state [ 29.249084] ipaccount: ifname [eth2] event[4] [ 29.253289] ipaccount: ifname [br-lan] event[4] [ 29.257792] br-lan: port 2(eth3) entered disabled state [ 29.262403] ipaccount: ifname [eth3] event[4] [ 29.267771] br-lan: port 3(eth4) entered disabled state [ 29.271982] ipaccount: ifname [eth4] event[4] [ 29.277014] ipaccount: ifname [eth1] event[4] [ 29.500027] wlan: [2900:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50 [ 29.500125] MINIDUMP VA .bss start=ffffffbffd0e9280 module=umacINFO: Cold boot calibration not applicable: ap-ac04 [ 29.690728] [ 29.690728] MINIDUMP VA .bss start=ffffffbffd374880 module=qca_ol=======ol_if_register_wifi3_0========== [ 29.708029] wlan: [3324:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd4a87f0 [ 29.710800] remoteproc remoteproc0: powering up q6v5-m3 [ 29.739240] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284 [ 29.739278] Sanity check passed for M3 image [ 29.825844] remoteproc remoteproc0: remote processor q6v5-m3 is now up [ 29.826082] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done [ 29.831465] wlan: [3324:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2 [ 29.836848] remoteproc remoteproc1: powering up q6v5-wcss [ 29.844353] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 29.849946] Sanity check passed for the image [ 30.248572] ipaccount: ifname [br-lan] event[4] /etc/rc.d/S51key_services_boot_check: @@@@@@ R3600 key_service_check skip wireless! [ 30.954008] glink_core_link_up glink is up [ 30.954202] glink_xprt_open_event [ 30.954335] Subsystem error monitoring/handling services are up [ 30.954376] remoteproc remoteproc1: remote processor q6v5-wcss is now up [ 30.954546] wlan: [3324:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3 [ 30.973181] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled [ 30.981120] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc911248 [ 30.990903] cnss: QMI WLFW service connected, state: 0x1 [ 30.997140] cnss: device_id : 0xfffe mem mode : [1] [ 31.002265] cnss: Boardid from dts:292,FW:ff [ 31.013807] cnss: BDF location : 0x000000004b0c0000 [ 31.013836] cnss: BDF IPQ8074/bdwlan.b292 size 131072 [ 31.017927] cnss: BDF download response , result: 0, err: 0x0 [ 31.023437] cnss: per device BDF location : 0x000000004b0e0000 [ 31.028908] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 [ 31.036527] cnss: BDF download response , result: 0, err: 0x0 /etc/rc.d/S54hyfi-bridging: /etc/rc.common: .: line 13: can't open '/lib/functions/hyfi-debug.sh' [ 31.055227] wlan: [3324:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode [ 31.064064] wlan: [3324:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 0 created on pipe 4 [ 31.064367] wlan: [3324:I:ANY] __ol_ath_attach: 3064: Allocated soc ffffffc016480880 [ 31.072386] btcoex_support 0 wlan_prio_gpio 0 [ 31.080373] wlan: [3324:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000 [ 31.084635] wlan: [3324:E:CONFIG] cfg_uint_item_handler: 171: dp_rxdma_monitor_desc_ring=128 - Out of range [4096, 16384]; Using 4096 [ 31.096333] wlan: [3324:I:ANY] osif_nss_wifi_soc_setup: 186: nss-wifili:#1 register wifili function for soc [ 31.108078] wlan: [3324:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 3 Target Type 18 [ 31.118002] wlan: [3324:I:ANY] __ol_ath_attach: 3278: dev name soc0 [ 31.127937] wlan: [3324:I:ANY] ol_ath_soc_attach: 6553: WMI attached. wmi_handle ffffffc017af8400 [ 31.133886] wlan: [3324:I:ANY] htc_wmi_init: 5920: htc_wmi_init() HT Create . ffffffc0166fe000 [ 31.142783] wlan: [3324:I:ANY] htc_wmi_init: 5927: htc_wmi_init() Skipping BMI Done. [ 31.151353] wlan: [3324:I:ANY] htc_wmi_init: 5984: [htc_wmi_init:5984] host_enable 0 nss_nwifi_offload 0 [ 31.162847] wlan: [3324:I:ANY] ol_target_init_complete: 6102: CDP soc attach success [ 31.168831] wlan: [3324:I:ANY] ol_target_init_complete: 6109: Soc attach success NSS config 0 [ 31.176926] wlan: [3324:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc0166fe000, ep 2, value 1 [ 31.185777] wlan: [3324:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc0166fe000, ep 3, value 1 [ 31.195838] wlan: [103:I:TIF] HE_CAP Info = 1a08010d [ 31.205763] wlan: [103:I:TIF] Num HW modes = 1 [ 31.210887] wlan: [103:I:TIF] Num PHY = 2 [ 31.215120] wlan: [103:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 31.219116] wlan: [103:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, [ 31.225304] wlan: [103:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 0 wireless modes = f97f9001 [ 31.233940] wlan: [103:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes, [ 31.243173] wlan: [103:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 1 wireless modes = 680680c [ 31.252962] wlan: [103:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 1 [ 31.260925] wlan: [103:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx: 0 [ 31.270649] wlan: [103:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs: 1 [ 31.280761] wlan: [103:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 362: Do not allocate DFS object for 2G, pdev_id = 1 [ 31.298395] wlan: [103:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success [ 31.305889] wlan: [103:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success /etc/rc.d/S60iweventd: iwevent-call start ok /etc/rc.d/S77trafficd: refresh ifname into ipaacount in [lan-dev 5g-wl 2.4g-wl wl-guest[ 31.363672] ipaccount: refresh dev ifname to [eth2 eth3 eth4 wl0 wl1 wl14] [ 31.367878] ipaccount: landev_init_all() add dev [eth2] is_wireless: 0. [ 31.374870] ipaccount: landev_init_all() add dev [eth3] is_wireless: 0. [ 31.381484] ipaccount: landev_init_all() add dev [eth4] is_wireless: 0. [ 31.388012] ipaccount: landev_init_all() get dev [wl0] not found. [ 31.394674] ipaccount: landev_init_all() get dev [wl1] not found. [ 31.400948] ipaccount: landev_init_all() get dev [wl14] not found. [ 31.412690] wlan: [103:I:ANY] copy_fw_abi_version_tlv: 6258: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 ] /etc/rc.d/S77trafficd: eth2 eth3 eth4 wl0 wl1 wl14 /etc/rc.d/S77trafficd: trafficd start ok /etc/rc.d/S80datacenter: chmod: /userdisk/data: Read-only file system [ 31.544029] wlan: [103:I:ANY] dp_peer_map_attach_wifi3: 9979: dp_peer_map_attach_wifi3 max_peers 311, max_ast_index: 1040 [ 31.544029] [ 31.544153] wlan: [103:I:ANY] ready_extract_init_status_tlv: 8002: ready_extract_init_status_tlv:0 [ 31.558609] wlan: [3324:I:ANY] ol_ath_connect_htc: 1219: WMI is ready [ 31.621251] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 37 is unavailable [ 31.621293] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable [ 31.629310] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable [ 31.638238] wlan: [3324:I:ANY] ol_ath_soc_attach: 6627: connect HTC [ 31.646147] wlan: [3324:I:ANY] ol_ath_soc_attach: 6628: bypasswmi : 0 [ 31.652261] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable [ 31.658756] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable [ 31.667184] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable [ 31.676119] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable [ 31.684784] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable [ 31.693288] wlan: [3324:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable [ 31.701710] wlan: [3324:I:ANY] ol_ath_soc_attach: 6703: ol_ath_soc_attach() UMAC attach . [ 31.711225] wlan: [3324:I:ANY] ath_lowi_if_netlink_init: 177: ath_lowi_if_netlink_init LOWI Netlink successfully created [ 31.718373] wlan: [3324:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi0 [ 31.729281] wlan: [3324:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target [ 31.736134] wlan: [3324:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default [ 31.743828] wlan: [3324:I:ANY] ol_ath_pdev_attach: 7168: interface_id 0 [ 31.751380] wlan: [3324:I:ANY] ol_ath_pdev_regdmn_init: 6857: phy id = 0 Modes supported [ 31.757599] wlan: [3324:I:ANY] ol_ath_pdev_regdmn_init: 6864: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 31.766249] wlan: [3324:I:ANY] ol_ath_pdev_regdmn_init: 6872: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100 [ 31.776242] wlan: [3324:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = f97f9001 before update [ 31.790647] wlan: [3324:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = f97f9001 after update [ 31.800519] wlan: [3324:I:ANY] ol_ath_update_ext_caps: 1841: 11ax 5G supported case [ 31.809934] wlan: [3324:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 31.817201] ieee80211_cbs_init CBS Inited [ 31.826878] wlan: [3324:I:ANY] acfg_attach: 3457: acfg_attach: 3457: Netlink socket created:ffffffc0179fa000 [ 31.827731] wlan: [3324:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX [ 31.837872] wlan: [3324:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats: 1 [ 31.850187] wlan: [3324:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25 [ 31.855414] wlan: [0:I:ANY] ol_ath_pdev_attach: 7504: Set global_ic[1], ptr:ffffffbffd0e95e0 [ 31.862762] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc0178fc008) Enabling DBDC Repeater 1 [ 31.871243] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc0178fc008) is_primary 1 [ 31.871275] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 31.889070] wlan: [3324:I:ANY] ol_ath_pdev_attach: 7621: Pdev = 0 Number of peers = 137 [ 31.897788] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11862: twt enabled. [ 31.897788] [ 31.900578] wlan: [3324:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan 36 blocked from cfg [ 31.900584] wlan: [3324:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg [ 31.900616] wlan: [3324:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 31.900616] [ 31.900620] wlan: [3324:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 31.900620] [ 31.900627] wlan: [3324:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc017afb000 ic->ic_wrap_com=ffffffc017afb000 &wrap_com->wc_devt=ffffffc017afb000 [ 31.900627] [ 31.900654] wlan: [3324:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60 [ 31.900659] wlan: [3324:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi0 features 41 [ 31.900725] wlan: [3324:I:ANY] wlan_cfg80211_init: 9619: Number of 5G channels: 25 [ 31.900990] wlan: [3324:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc014860880, wdev: 0xffffffc014870a70, wiphy: 0xffffffc0166c62a0, netdev: 0xffffffc014860000 [ 31.901057] ipaccount: ifname [wifi0] event[16] [ 31.901496] ipaccount: ifname [wifi0] event[5] [ 31.901744] wlan: [3324:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi1 [ 31.901763] wlan: [3324:I:ANY] __ol_ath_attach: 3437: Skip txrx_pdev_attach_target [ 31.901767] wlan: [3324:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default [ 31.901829] wlan: [3324:I:ANY] ol_ath_pdev_attach: 7168: interface_id 1 [ 31.901844] wlan: [3324:I:ANY] ol_ath_pdev_regdmn_init: 6857: phy id = 1 Modes supported [ 31.901850] wlan: [3324:I:ANY] ol_ath_pdev_regdmn_init: 6864: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 [ 31.901857] wlan: [3324:I:ANY] ol_ath_pdev_regdmn_init: 6872: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 [ 31.901861] wlan: [3324:I:ANY] ol_ath_update_wireless_modes: 1318: wireless_modes = 680680c before update [ 31.901865] wlan: [3324:I:ANY] ol_ath_update_wireless_modes: 1333: Wireless_modes = 680680c after update [ 31.901870] wlan: [3324:I:ANY] ol_ath_update_ext_caps: 1849: 11ax 2G supported case [ 31.902000] wlan: [3324:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 31.902078] ieee80211_cbs_init CBS Inited [ 31.902095] wlan: [3324:I:ANY] acfg_attach: 3432: Offload using existing sock ffffffc0179fa000 [ 31.902106] wlan: [3324:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX [ 31.902111] wlan: [3324:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats: 1 [ 31.902335] wlan: [3324:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11 [ 31.902365] wlan: [0:I:ANY] ol_ath_pdev_attach: 7504: Set global_ic[2], ptr:ffffffbffd0e95e0 [ 31.902372] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(ffffffc0178fca08) Enabling DBDC Repeater 1 [ 31.902404] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc0178fca08) is_primary 0 [ 31.902417] wlan: [3324:I:ANY] ol_ath_pdev_attach: 7621: Pdev = 1 Number of peers = 137 [ 31.903815] wlan: [3324:E:WMI] event handler already registered 0x6019 [ 31.904784] wlan: [3324:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 1) chan 36 blocked from cfg [ 31.904789] wlan: [3324:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 583: ( 2) chan 132 blocked from cfg [ 31.904820] wlan: [3324:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 31.904820] [ 31.904825] wlan: [3324:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 31.904825] [ 31.904834] wlan: [3324:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc00f0f4400 ic->ic_wrap_com=ffffffc00f0f4400 &wrap_com->wc_devt=ffffffc00f0f4400 [ 31.904834] [ 31.904866] wlan: [3324:I:ANY] __ol_ath_attach: 3641: needed_headroom reservation 60 [ 31.904872] wlan: [3324:I:ANY] ol_ath_enable_fraglist: 2931: Enabled Fraglist bit for the radio wifi1 features 41 [ 31.904899] wlan: [3324:I:ANY] wlan_cfg80211_init: 9607: Number of 2G channels: 11 [ 31.905115] wlan: [3324:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc0148a0880, wdev: 0xffffffc0148b0a70, wiphy: 0xffffffc0184ebaa0, netdev: 0xffffffc0148a0000 [ 31.905171] ipaccount: ifname [wifi1] event[16] [ 31.905641] ipaccount: ifname [wifi1] event[5] [ 31.905837] ipaccount: ifname [soc0] event[16] [ 31.906133] ipaccount: ifname [soc0] event[5] [ 31.906217] wlan: [3324:I:ANY] wlan_pdev_operation: 729: num_radios=1, wifi_radios[0].sc = ffffffc014860880_radio_type = 2 [ 31.906223] wlan: [3324:I:ANY] wlan_pdev_operation: 729: num_radios=2, wifi_radios[1].sc = ffffffc0148a0880_radio_type = 2 [ 31.906259] wlan: [3324:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss) [ 31.927290] [ 31.927290] MINIDUMP VA .bss start=ffffffbffd4a8c00 module=wifi_3_0 [ 31.927290] wlan: [4202:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd571858 [ 31.927298] wlan: [4202:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd571858 [ 31.927882] wlan: [4202:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss) [ 31.928029] ath_ol_pci_2_0 0000:01:00.0: enabling device (0000 -> 0002) [ 32.081146] wlan: [4202:I:ANY] hif_set_hia_extnd: 1537: [ 32.081146] CLOCK PLL skipped [ 32.083265] wlan: [4202:E:HIF] hif_pci_configure_legacy_irq: X, ret = 0 [ 32.083286] wlan: [4202:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 32 created on pipe 4 [ 32.083578] wlan: [4202:I:ANY] __ol_ath_attach: 3064: Allocated soc ffffffc00e980880 [ 32.083660] btcoex_support 0 wlan_prio_gpio 0 [ 32.418524] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 32.419135] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 11862: twt enabled. [ 32.419135] [ 32.433373] wlan: [4202:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 3 Target Type 7 [ 32.435165] wlan: [4202:I:ANY] __ol_ath_attach: 3278: dev name soc1 [ 32.445122] wlan: [4202:I:ANY] ol_target_init: 2459: 6ol_target_init() BMI inited. [ 32.451433] wlan: [4202:I:ANY] ol_target_init: 2473: 6ol_target_init() BMI Get Target Info. [ 32.459060] wlan: [4202:I:ANY] ol_target_init: 2480: Chip id: 0x7, chip version: 0x4100016d [ 32.467351] wlan: [4202:I:ANY] ol_ath_host_config_update: 4688: 6 [ 32.467351] CE WAR Disabled [ 32.467351] [ 32.475760] wlan: [4202:I:ANY] ol_ath_configure_target: 564: 6NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 32.486990] wlan: [4202:I:ANY] ol_target_init: 2502: 6ol_target_init() configure Target . [ 32.496280] wlan: [4202:I:ANY] ol_transfer_bin_file: 1407: ol_transfer_bin_file: flash data file defined [ 32.504619] wlan: [4202:I:ANY] ol_transfer_bin_file: 1552: ol_transfer_bin_file[1552] Get Caldata for soc1. [ 32.514187] wlan: [4202:I:ANY] qc98xx_verify_checksum: 805: qc98xx_verify_checksum: flash checksum passed: 0xd3eb [ 32.524026] wlan: [4202:I:ANY] ol_transfer_bin_file: 1607: ol_transfer_bin_file 1607: Download Flash data len 2116 [ 32.534056] wlan: [4202:I:ANY] ol_transfer_bin_file: 1719: 6Board extended Data download address: 0x0 [ 32.550480] wlan: [4202:I:ANY] ol_download_cal_data: 1898: ol_download_cal_data: Board data file: 4 successfully downloaded, download address: 0000000000401cc0 [ 32.553229] wlan: [4202:I:ANY] ol_transfer_bin_file: 1147: 6 [ 32.553229] Mission mode: Firmware CHIP Version 0 [ 32.569280] wlan: [4202:I:ANY] ol_transfer_bin_file: 1215: ol_transfer_bin_file: Downloading firmware file: AR9887/athwlan.bin /etc/rc.d/S96scan: FAIL [ 32.624705] wlan: [4202:I:ANY] ol_transfer_bin_file: 1435: 6ol_transfer_bin_file 1435: downloading file 1, Download data len 234392 /etc/rc.d/S98miqos: { /etc/rc.d/S98miqos: status=0 /etc/rc.d/S98miqos: data=ok /etc/rc.d/S98miqos: } [ 33.626611] wlan: [4202:I:ANY] ol_target_init: 2511: 6ol_target_init() Download FW done. [ 33.626785] wlan: [4202:I:ANY] ol_ath_soc_attach: 6553: WMI attached. wmi_handle ffffffc00f0f7400 [ 33.633867] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 144 is unavailable [ 33.642764] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 62 is unavailable [ 33.651365] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 151 is unavailable [ 33.659958] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 206 is unavailable [ 33.668437] wlan: [4202:I:ANY] htc_wmi_init: 5920: htc_wmi_init() HT Create . ffffffc00e941000 [ 33.677103] wlan: [4202:I:ANY] htc_wmi_init: 5984: [htc_wmi_init:5984] host_enable 1 nss_nwifi_offload 0 [ 33.687818] wlan: [4202:I:ANY] ol_soc_pdev_attach: 317: soc=ffffffc00e980880 0000000000000000 -1 [ 33.695432] wlan: [4202:I:ANY] ol_target_init_complete: 6102: CDP soc attach success [ 33.704051] wlan: [4202:I:ANY] ol_target_init_complete: 6109: Soc attach success NSS config 0 [ 33.711956] wlan: [4202:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc00e941000, ep 2, value 1 [ 33.720781] wlan: [6:I:TIF] init_deinit_sw_version_check: 1614: Firmware_Build_Number:0 [ 33.731505] wlan: [6:E:TIF] init_deinit_sw_version_check: 1645: host/RAM_fw Build Ver Mismatch: H:0x47, F:0x0 ! [ 33.741402] wlan: [6:E:TIF] init_deinit_sw_version_check: 1660: host/RAM_fw uses same Ver: Major:0x1, Minor:0x0,Release:0x0, Build:0x47 [ 33.748724] wlan: [6:E:TIF] init_deinit_populate_fw_version_cmd: 106: failed to save fw version [ 33.761043] wlan: [6:I:TIF] init_deinit_update_large_ap_config: 307: LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256 [ 33.769576] wlan: [6:I:TIF] init_deinit_mem_mgr_alloc_chunk: 1151: req_id 1 idx 0 num_units 145 unit_len 404 [ 33.781672] wlan: [6:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 0 [ 33.791160] wlan: [6:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx: 0 [ 33.801103] wlan: [6:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs: 1 [ 33.810679] wlan: [6:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_get_po_radars: 392: UNINIT domain [ 33.820787] wlan: [6:I:ANY] ol_tx_pflow_ctrl_init: 254: Startup Mode-0 set [ 33.828634] wlan: [6:I:ANY] ol_txrx_pdev_attach: 946: pdev attach scn = ffffffc00e600880, scn ctx = 0000000000000000 scn ifnum = 0 [ 33.835336] wlan: [6:I:ANY] ol_txrx_pdev_attach: 947: pdev attach soc = ffffffc00e980880, soc ctx = 0000000000000000, soc id = -1 soc ifnum = 0 [ 33.847281] wlan: [6:I:ANY] htt_alloc_peer_map_mem: 141: [ 33.847281] htt_alloc_peer_map_mem : Alloc Success : host q vaddr ffffffc017a6a000 paddr 58a6a000 [ 33.860295] wlan: [6:I:ANY] htt_alloc_peer_map_mem: 142: [ 33.860295] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts [ 33.876338] [ 33.876338] <=== cfg max peer id 2080 ====> [ 33.887359] wlan: [6:I:ANY] ol_txrx_pdev_attach: 996: 61424 tx desc's allocated ; range starts from ffffffc00db40000 [ 33.892853] wlan: [6:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success [ 34.009506] wlan: [0:I:ANY] ol_ath_debug_print_event_handler: 3300: FIRMWARE:P 145 V 16 T 443 [ 34.009506] [ 34.009506] [ 34.014353] wlan: [6:E:TIF] init_deinit_ready_event_handler: 467: agile capability disabled in HW [ 34.020316] wlan: [4202:I:ANY] __ol_ath_check_wmi_ready: 4545: ABI Version mismatch: Host(0x3), Target(0x0) [ 34.029006] wlan: [4202:I:ANY] ol_ath_connect_htc: 1219: WMI is ready [ 34.038549] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 104 is unavailable [ 34.045083] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 180 is unavailable [ 34.053684] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 167 is unavailable [ 34.062174] wlan: [4202:E:CMN_MLME] target_if_vdev_mgr_wmi_event_register: 437: failed to register for delete response [ 34.070767] wlan: [4202:E:DIRECT_BUF_RX] direct_buf_rx_target_attach: 145: hal soc or osdev is null [ 34.081444] wlan: [4202:I:ANY] ol_ath_soc_attach: 6620: ol_ath_soc_attach: Direct Buffer Rx Target Attach Failed [ 34.090404] wlan: [4202:I:ANY] ol_ath_soc_attach: 6627: connect HTC [ 34.100894] wlan: [4202:I:ANY] ol_ath_soc_attach: 6628: bypasswmi : 0 [ 34.106775] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 105 is unavailable [ 34.113502] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 187 is unavailable [ 34.122469] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 188 is unavailable [ 34.130537] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 142 is unavailable [ 34.139110] wlan: [4202:E:WMI] wmi_unified_register_event_handler: Event id 148 is unavailable [ 34.147667] wlan: [4202:I:ANY] ol_ath_soc_attach: 6703: ol_ath_soc_attach() UMAC attach . [ 34.157087] wlan: [4202:I:ANY] ath_lowi_if_netlink_init: 180: ath_lowi_if_netlink_init Incremented LOWI netlink ref count: 2 [ 34.164559] wlan: [4202:I:ANY] __ol_ath_attach: 3392: pdev_netdev name wifi2 [ 34.175903] wlan: [4202:I:ANY] __ol_ath_attach: 3417: nss-wifi: update radio nss context with soc context for legay radio [ 34.182963] wlan: [4202:I:ANY] htt_h2t_frag_desc_bank_cfg_msg: 217: HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for SoC ID = 1 [ 34.182990] wlan: [0:I:ANY] htt_t2h_msg_handler_misc: 449: 6target uses HTT version 2.2; host uses 2.2 [ 34.210920] wlan: [4202:I:ANY] __ol_ath_attach: 3461: BURSTING enabled by default [ 34.214644] wlan: [4202:I:ANY] ol_ath_pdev_attach: 7168: interface_id 2 [ 34.222277] wlan: [4202:I:ANY] ol_ath_update_ext_caps: 1866: 11AX not supported [ 34.228726] wlan: [4202:I:ANY] ol_regdmn_start: 424: ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. [ 34.238124] wlan: [4202:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 34.251431] ieee80211_cbs_init CBS Inited [ 34.261066] wlan: [4202:I:ANY] acfg_attach: 3407: acfg_attach: Offload using existing sock ffffffc0179fa000 [ 34.261896] acfg_attach: Offload using existing sock ffffffc0179fa000 [ 34.261914] wlan: [4202:I:ANY] ol_ath_stats_attach: 2071: periodic_chan_stats: 1 [ 34.262000] wlan: [4202:I:ANY] ol_txrx_mgmt_tx_cb_set: 3432: >>>> CB Set 0000000000000000 [ 34.262409] wlan: [4202:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 36 [ 34.262447] wlan: [0:I:ANY] ol_ath_pdev_attach: 7504: Set global_ic[3], ptr:ffffffbffd0e95e0 [ 34.262454] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(ffffffc010bbbc08) is_primary 0 [ 34.262462] wlan: [4202:I:ANY] ol_ath_pdev_attach: 7621: Pdev = 0 Number of peers = 144 [ 34.262471] wlan: [4202:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11 [ 34.262471] [ 34.262475] wlan: [4202:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11 [ 34.262475] [ 34.262486] wlan: [4202:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 547: cfg block channel list is empty [ 34.262495] wlan: [4202:E:ANY] ol_ath_set_obss_thresh: 7099: ol_ath_set_obss_thresh: Could not set obss pd thresh enable val [ 34.262505] wlan: [4202:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 34.262505] [ 34.262509] wlan: [4202:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 34.262509] [ 34.262515] wlan: [4202:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc00f0f6c00 ic->ic_wrap_com=ffffffc00f0f6c00 &wrap_com->wc_devt=ffffffc00f0f6c00 [ 34.262515] [ 34.262539] wlan: [4202:I:ANY] __ol_ath_attach: 3651: hard_header_len reservation 74 [ 34.262563] wlan: [4202:I:ANY] wlan_cfg80211_init: 9607: Number of 2G channels: 11 [ 34.262583] wlan: [4202:I:ANY] wlan_cfg80211_init: 9619: Number of 5G channels: 25 [ 34.262819] wlan: [4202:I:ANY] ieee80211_cfg80211_radio_attach: 9713: ic: 0xffffffc00e600880, wdev: 0xffffffc00e610a70, wiphy: 0xffffffc00ed75aa0, netdev: 0xffffffc00e600000 [ 34.262868] ipaccount: ifname [wifi2] event[16] [ 34.263298] ipaccount: ifname [wifi2] event[5] [ 34.263437] wlan: [4202:I:ANY] ol_ath_thermal_mitigation_attach: 1378: ol_ath_thermal_mitigation_attach: TT not supported in FW [ 34.263437] [ 34.263455] ipaccount: ifname [soc1] event[16] [ 34.263763] ipaccount: ifname [soc1] event[5] [ 34.263850] wlan: [4202:I:ANY] wlan_pdev_operation: 729: num_radios=3, wifi_radios[2].sc = ffffffc00e600880_radio_type = 2 [ 34.263860] Event 0x3 is registered for RC 1 [ 34.277472] wlan: [5066:I:ANY] pktlog_init_2_0: 1564: Initializing Pktlog for AR9888, pktlog_hdr_size = 16 /etc/rc.d/S99boot_check: : INFO: rcS timing 25.127578623s seconds. No Direct-Attach chipsets found. Mon May 11 08:59:20 CST 2020 boot_check[4989]: Booting up finished. /etc/init.d/network: cat: can't open '1': No such file or directory [ 34.683904] wlan: [103:E:ANY] [soc1] FWLOG: [34503] WHAL_ERROR_RESET_PM ( ) [ 34.683904] [ 34.683950] wlan: [103:E:ANY] [soc1] FWLOG: [34736] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0x10, 0x10) [ 34.683950] [ 35.038731] wlan: [5722:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 13 [ 35.038867] wlan: [5722:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58 [ 35.045677] wlan: [5722:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 13 [ 35.053460] wlan: [5722:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 979: freq=58 [ 35.060807] wlan: [5722:I:ANY] number of channels: 2G = 0 5G = 13 /etc/init.d/network: Enable ol_stats by default for Lithium platforms [ 35.400533] wlan: [5737:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :8c:53:c3:d6:6a:40 ret: 0 [ 35.428870] wlan: [5739:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 [ 35.515760] wlan: [0:I:ANY] ol_ath_set_config_param: 2203: Disconnect_timeout value: 10 [ 35.546054] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Reconfiguration_timeout value:60 /etc/init.d/network: cat: can't open '/lib/wifi/wifi_nss_hk_olnum': No such file or directory /etc/init.d/network: sh: 3: unknown operand /etc/init.d/network: cat: can't open '/sys/class/net/wl0/address': No such file or directory /etc/init.d/network: sh: out of range /etc/init.d/network: sh: out of range number of vifs: cfg023579 [ 35.760937] ipaccount: ifname [wifi0] event[13] [ 35.761224] ipaccount: ifname [wifi0] event[1] /etc/init.d/network: cfg80211: ifname: wl0 mode: __ap cfgphy: phy0 [ 35.863425] wlan: [5807:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 6 for interface: wl0 : clone params: 0x00000001 [ 35.863499] wlan: [5807:I:ANY] osifp_create_wlan_vap: 10190: VDEV Create 8c:53:c3:d6:6a:40 [ 35.874735] wlan: [5807:E:CMN_MLME] mlme_vdev_ext_obj_create: 1321: VDEV MLME obj is creation [ 35.882781] wlan: [5807:I:ANY] wlan_vap_create: 1548: enter. devhandle=0xffffffc014860880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 35.882781] [ 35.891554] wlan: [5807:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 [ 35.904440] wlan: [5807:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1 [ 35.911436] wlan: [5807:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x7b [ 35.924921] wlan: [5807:I:ANY] ol_ath_vap_set_param: 2122: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 35.931917] wlan: [5807:I:ANY] MBO Initialized [ 35.945898] wlan: [5807:I:ANY] OCE Initialized [ 35.950227] wlan: [5807:I:ANY] osif_nss_ol_vap_create: 1289: NSS wifi offload VAP create IF 31 nss_id -1 [ 35.954715] wlan: [5807:I:ANY] NSS radio_if 29 [ 35.964389] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1041: VDEV configuration success: 0 [ 35.968640] wlan: [5807:I:ANY] osif_nss_ol_vap_create: 1397: vap create ffffffc00ef5a880 : if_num 31 [ 35.976884] wlan: [5807:I:ANY] wlan_vap_create: 1582: exit [ 35.986282] wlan: [5807:E:ANY] SA disabled [ 35.991810] wlan: [5807:E:ANY] SA disabled [ 35.995759] wlan: [5807:I:ANY] osif_create_vap_complete: 10385: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 35.999790] wlan: [5807:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 36.008578] ipaccount: ifname [wl0] event[16] [ 36.015206] ipaccount: ifname [wl0] event[5] [ 36.018954] ipaccount: landev_init set ifname [wl0] [ 36.023445] wlan: [5807:I:ANY] VAP device wl0 created osifp: (ffffffc00ef5a880) os_if: (ffffffc008e60000) /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: out of range /etc/init.d/network: error_handler received : -22 /etc/init.d/network: Failed to send message to driver Error:-22 [ 36.626067] wlan: [5955:I:ANY] ieee80211_ucfg_setparam: 1302: Setting Max Stations:124 [ 36.638866] wlan: [5958:I:ANY] wlan_set_param: 2826: HE MU BFER already set with this value =1 [ 36.642928] wlan: [5960:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 36.646797] wlan: [5960:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x3b [ 36.663731] wlan: [5961:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:0|ul_mumimo:0 [ 36.666957] wlan: [5961:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x1b /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: Following channels are blocked from Channel selection algorithm /etc/init.d/network: [52] [56] [60] [64] /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: 0: unknown operand [ 36.945276] ipaccount: ifname [wl0] event[13] [ 36.945544] 8021q: adding VLAN 0 to HW filter on device wl0 [ 36.949000] ipaccount: ifname [wl0] event[1] [ 36.954894] ipaccount: ifname [wl0] event[20] [ 36.958920] ipaccount: ifname [wl0] event[26] [ 36.963016] ipaccount: ifname [wl0] event[21] [ 36.967106] device wl0 entered promiscuous mode [ 36.971853] br-lan: port 4(wl0) entered forwarding state [ 36.975821] br-lan: port 4(wl0) entered forwarding state [ 36.981756] ipaccount: ifname [wl0] event[27] [ 36.986683] ipaccount: ifname [br-lan] event[4] [ 37.025253] wlan: [1512:I:ANY] DES SSID SET=AX3600-5G [ 37.025286] wlan: [1512:I:ANY] wlan_cfg80211_set_phymode: 1151: cfg80211 mode:30 [ 37.030413] wlan: [1512:I:ANY] ol_ath_vdev_install_key_send: 2734: Keyix=1 Keylen=32 Keyflags=1 Cipher=2 [ 37.036760] wlan: [1512:I:ANY] ol_ath_vdev_install_key_send: 2735: macaddr 8c:53:c3:d6:6a:40 [ 37.046865] ipaccount: ifname [wl0] event[4] /etc/init.d/network: OK /etc/init.d/network: sh: out of range qcawificfg80211: enable radio wifi1 /etc/init.d/network: cp: omitting directory '/cfg/default/internal' [ 37.346326] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:44 [ 37.346708] wlan: [0:E:ANY] SA disabled [ 37.350494] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps) [ 37.354096] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps) [ 37.851751] wlan: [6482:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 13 [ 37.851831] wlan: [6482:I:ANY] number of channels: 2G = 13 5G = 0 /etc/init.d/network: Enable ol_stats by default for Lithium platforms [ 38.055248] wlan: [6543:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :8c:53:c3:d6:6a:3f ret: 0 [ 38.084687] wlan: [6552:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 [ 38.188771] wlan: [0:I:ANY] ol_ath_set_config_param: 2203: Disconnect_timeout value: 10 [ 38.221377] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Reconfiguration_timeout value:60 /etc/init.d/network: cat: can't open '/lib/wifi/wifi_nss_hk_olnum': No such file or directory /etc/init.d/network: sh: 3: unknown operand /etc/init.d/network: cat: can't open '/sys/class/net/wl1/address': No such file or directory /etc/init.d/network: sh: out of range /etc/init.d/network: sh: out of range number of vifs: cfg043579 [ 38.439246] ipaccount: ifname [wifi1] event[13] [ 38.439675] ipaccount: ifname [wifi1] event[1] /etc/init.d/network: cfg80211: ifname: wl1 mode: __ap cfgphy: ph[ 38.454974] wlan: [6700:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 6 for interface: wl1 : clone params: 0x00000001 [ 38.455611] wlan: [6700:I:ANY] osifp_create_wlan_vap: 10190: VDEV Create 8c:53:c3:d6:6a:3f [ 38.467791] wlan: [6700:E:CMN_MLME] mlme_vdev_ext_obj_create: 1321: VDEV MLME obj is creation [ 38.475906] wlan: [6700:I:ANY] wlan_vap_create: 1548: enter. devhandle=0xffffffc0148a0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 38.475906] [ 38.484863] wlan: [6700:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 [ 38.497633] wlan: [6700:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1 [ 38.504635] wlan: [6700:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x7b [ 38.518173] wlan: [6700:I:ANY] ol_ath_vap_set_param: 2122: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 38.525166] wlan: [6700:I:ANY] MBO Initialized [ 38.539187] wlan: [6700:I:ANY] OCE Initialized [ 38.543507] wlan: [6700:I:ANY] osif_nss_ol_vap_create: 1289: NSS wifi offload VAP create IF 32 nss_id -1 [ 38.547933] wlan: [6700:I:ANY] NSS radio_if 30 [ 38.557640] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1041: VDEV configuration success: 0 [ 38.561928] wlan: [6700:I:ANY] osif_nss_ol_vap_create: 1397: vap create ffffffc008f06880 : if_num 32 [ 38.570176] wlan: [6700:I:ANY] wlan_vap_create: 1582: exit [ 38.579532] wlan: [6700:E:ANY] SA disabled [ 38.585083] wlan: [6700:E:ANY] SA disabled [ 38.589003] wlan: [6700:I:ANY] osif_create_vap_complete: 10385: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 38.593068] wlan: [6700:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 38.601783] ipaccount: ifname [wl1] event[16] [ 38.608510] ipaccount: ifname [wl1] event[5] [ 38.612160] ipaccount: landev_init set ifname [wl1] [ 38.616727] wlan: [6700:I:ANY] VAP device wl1 created osifp: (ffffffc008f06880) os_if: (ffffffc008f28000) y1 /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: out of range [ 38.968464] br-lan: port 4(wl0) entered forwarding state /etc/init.d/network: error_handler received : -22 /etc/init.d/network: Failed to send message to driver Error:-22 [ 39.072378] wlan: [6857:I:ANY] ieee80211_ucfg_setparam: 1302: Setting Max Stations:124 [ 39.082717] wlan: [6860:I:ANY] wlan_set_param: 2826: HE MU BFER already set with this value =1 [ 39.086052] wlan: [6862:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 39.090615] wlan: [6862:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x3b [ 39.106815] wlan: [6863:I:ANY] ol_ath_vap_set_param: 2097: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:0|ul_mumimo:0 [ 39.110861] wlan: [6863:I:ANY] ol_ath_vap_set_param: 2107: he_bf_cap=0x1b /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: auto: out of range [ 39.299079] ipaccount: ifname [wl1] event[13] [ 39.299322] 8021q: adding VLAN 0 to HW filter on device wl1 [ 39.302548] ipaccount: ifname [wl1] event[1] [ 39.308623] ipaccount: ifname [wl1] event[20] [ 39.312471] ipaccount: ifname [wl1] event[26] [ 39.316722] ipaccount: ifname [wl1] event[21] [ 39.321006] device wl1 entered promiscuous mode [ 39.325295] br-lan: port 5(wl1) entered forwarding state [ 39.329610] br-lan: port 5(wl1) entered forwarding state [ 39.335218] ipaccount: ifname [wl1] event[27] [ 39.341024] wlan: [1512:I:ANY] wlan_cfg80211_do_acs: 3295: vap-1(wl1):ACS Params [ 39.344692] wlan: [1512:I:ANY] wlan_cfg80211_do_acs: 3298: ht_enabled:0|ht40_enabled:0|vht_enabled:0|hw_mode:29|chwidth:20| [ 39.352188] wlan: [1512:I:ANY] ieee80211_autoselect_infra_bss_channel: 3679: ACS started: vap:0xffffffc008f28000 /etc/init.d/network: OK /etc/init.d/network: sh: out of range qcawificfg80211: enable radio wifi2 /etc/init.d/network: cp: omitting directory '/cfg/default/internal' /etc/init.d/network: Enable ol_stats by default for Lithium platforms [ 40.217635] wlan: [7340:I:ANY] wlan_cfg80211_set_hwaddr: 5439: wlan_cfg80211_set_hwaddr :8c:53:c3:d6:6a:41 ret: 0 [ 40.246452] wlan: [7342:I:ANY] ol_ath_set_config_param: 1493: set TXBF_SND_PERIOD: value 100 wmi_status 0 [ 40.335468] wlan: [0:I:ANY] ol_ath_set_config_param: 2203: Disconnect_timeout value: 10 [ 40.368221] wlan: [0:I:ANY] ol_ath_set_config_param: 2209: Reconfiguration_timeout value:60 /etc/init.d/network: cat: can't open '/lib/wifi/wifi_nss_hk_olnum': No such file or directory /etc/init.d/network: sh: 3: unknown operand number of vifs: cfg063579 [ 40.536788] ipaccount: ifname [wifi2] event[13] [ 40.537130] ipaccount: ifname [wifi2] event[1] /etc/init.d/network: cfg80211: ifname: wl2 mode: managed cfgphy:[ 40.552345] wlan: [7381:I:ANY] wlan_cfg80211_add_virtual_intf: 306: proprietary mode 1 for interface: wl2 : clone params: 0x00000001 [ 40.552910] wlan: [7381:I:ANY] osifp_create_wlan_vap: 10190: VDEV Create 8c:53:c3:d6:6a:41 [ 40.565144] wlan: [7381:E:CMN_MLME] mlme_vdev_ext_obj_create: 1321: VDEV MLME obj is creation [ 40.573208] wlan: [7381:I:ANY] wlan_vap_create: 1548: enter. devhandle=0xffffffc00e600880, opmode=IEEE80211_M_STA, flags=0x1 [ 40.573208] [ 40.581997] wlan: [7381:I:ANY] ol_ath_vap_set_param: 1107: Setting SGI value: 1 [ 40.594685] [UNSPECIFIED] vap-0((null)):mlme_sta_swbmiss_timer_disable: swbmiss disabled by tmp curmask 0x2 [ 40.601689] wlan: [7381:I:ANY] wlan_vap_create: 1582: exit [ 40.611738] wlan: [7381:E:ANY] SA disabled [ 40.617167] wlan: [7381:E:ANY] SA disabled [ 40.621221] wlan: [7381:I:ANY] osif_create_vap_complete: 10385: TX Checksum:1|SG:1|TSO:1|LRO:1 [ 40.625671] wlan: [7381:I:ANY] dp_lag_pdev_set_sta_vdev: 57: dp_lag_pdev_set_sta_vdev pdev(ffffffc010bbbc08) sta_vdev ffffffc008c13400 [ 40.633926] ipaccount: ifname [wl2] event[16] [ 40.646503] ipaccount: ifname [wl2] event[5] [ 40.650707] wlan: [7381:I:ANY] VAP device wl2 created osifp: (ffffffc008ec0880) os_if: (ffffffc008f88000) phy2 [ 40.684814] wlan: [103:E:ANY] [soc1] FWLOG: [41232] WHAL_ERROR_RESET_CHANNF1 ( ) [ 40.684814] /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: Interface doesn't accept private ioctl... /etc/init.d/network: minet (8BE0): Invalid argument /etc/init.d/network: sh: out of range /etc/init.d/network: error_handler received : -22 /etc/init.d/network: Failed to send message to driver Error:-22 [ 41.136056] wlan: [7537:I:ANY] ieee80211_ucfg_setparam: 1310: This command only support on Host AP mode. /etc/init.d/network: error_handler received : -22 /etc/init.d/network: Failed to send message to driver Error:-22 [ 41.175289] wlan: [7539:I:ANY] DES SSID SET=MIIOT_DEV [ 41.328473] br-lan: port 5(wl1) entered forwarding state /etc/init.d/network: [ 41.336106] wlan: [7574:I:ANY] wlan_set_param: 2709: HE Ul MU OFDMA is not allowed in current mode /etc/init.d/network: Interface doesn't accept private ioctl... /etc/init.d/network: he_ulofdma (8BE0): Invalid argument /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: 0: unknown operand /etc/init.d/network: sh: out of range /etc/init.d/network: sh: out of range [ 41.636592] ipaccount: ifname [wl2] event[13] [ 41.636851] 8021q: adding VLAN 0 to HW filter on device wl2 [ 41.640106] ipaccount: ifname [wl2] event[1] [ 41.645418] ipaccount: ifname [wl2] event[4] [ 41.649963] ipaccount: ifname [wl2] event[4] [ 41.690264] wlan: [1518:I:ANY] wlan_cfg80211_set_wificonfiguration: 7318: wlan_cfg80211_set_wificonfiguration: Unsuported Genric command: 0 /etc/init.d/network: OK /etc/init.d/network: sh: out of range [ 41.705110] ipaccount: ifname [wl2] event[9] [ 41.707258] wlan: [7660:I:ANY] osif_vap_stop: 9126: Clearing Desired BSSID for STA VAP [ 41.711956] wlan: [7660:E:mlme] wlan_mlme_stop_sta_vdev: 492: connection stop failed [ 41.720815] ipaccount: ifname [wl2] event[2] /etc/init.d/network: /etc/rc.common: .: line 13: can't open '/lib/functions/hyfi-debug.sh' /etc/init.d/network: uci: Entry not found /etc/init.d/network: device: wifi0 vifs: cfg023579 /etc/init.d/network: device: wifi1 vifs: cfg043579 /etc/init.d/network: device: wifi2 vifs: cfg063579 [ 43.975830] wlan: [3177:I:ANY] vap-1(wl1): ACS result PCH 6, SCH 0, hw_mode 1chwidth 40, vht_seg0 8, vht_seg1 0 [ 43.975889] wlan: [3177:I:ANY] ieee80211_acs_scan_evhandler: 3423: lock held duration: 0(ms) [ 44.000485] wlan: [1512:I:ANY] DES SSID SET=AX3600-2.4G [ 44.000515] wlan: [1512:I:ANY] wlan_cfg80211_set_phymode: 1151: cfg80211 mode:29 [ 44.005294] wlan: [1512:I:ANY] ol_ath_vdev_install_key_send: 2734: Keyix=1 Keylen=32 Keyflags=1 Cipher=2 [ 44.012251] wlan: [1512:I:ANY] ol_ath_vdev_install_key_send: 2735: macaddr 8c:53:c3:d6:6a:3f [ 44.022043] ipaccount: ifname [wl1] event[4] [ 48.622233] wlan: [3177:I:ANY] vdev[1]: Mgt Rate:1000(kbps) [ 48.622267] wlan: [3177:I:ANY] ieee80211_ht40intol_evhandler: 2942: lock held duration: 0(ms) [ 48.727760] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:6 [ 48.728067] wlan: [0:E:WMI] event handler already registered 0x2a001 [ 48.731818] wlan: [0:E:ANY] SA disabled [ 48.738155] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps) [ 48.741720] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)


COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Secure boot is not enabled but serial TX is Locked, to unlock it execute on shell

nvram set uart_en=1
nvram set boot_wait=on
nvram commit

Now, autoboot stop is available and TX is available!

Write a5 5a 00 00 into crash partition to factory mode

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/05/25 04:54
  • by freez3