Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:xiaomi:r4ac [2022/05/12 16:52] – Update warning diepeterpaninbox:toh:xiaomi:r4ac [2024/05/05 18:16] – removed obsolete information dnd
Line 1: Line 1:
-====== Xiaomi R4AC ======+====== Xiaomi Mi Router 4A (R4AC) 100M (International version) ======
 ~~NOTOC~~ ~~NOTOC~~
  
 /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+<WRAP important 100%>**Warning.!!** This hardware not same as **[[inbox:toh:xiaomi:xiaomi_mi_router_4a_gigabit_edition|Mi Router 4A Gigabit]]** nor **[[toh:xiaomi:mi_router_4a_mir4a_100m|Mi Router 4A (MIR4A) 100M (Chinese version)]]**, so don't brick your router!</WRAP>
  
-<WRAP important 100%>**Warning.!!** This hardware not same as **Mi Router 4A Gigabit** nor **Mi Router 4A (MIR4A100M**, so don't brick your router </WRAP>+The Xiaomi Mi Router 4A (R4AC) 100M **international version** is an indoor wireless router based on the MediaTek MT7628AN SoC, with three 10/100 Ethernet ports (2xLAN + 1xWAN), dual band 802.11bgn+ac (dual radio) WiFi and four external non-detachable antennae. The **international version**'s box bears **SKU DVB4230GL**. 
  
-The Xiaomi Mi Router 4A 100M is an indoor wireless router based on the MediaTek MT7628AN SoC, with three 10/100 Ethernet ports (2xLAN + 1xWAN), dual band 802.11bgn+ac (dual radio) WiFi and four external non-detachable antennae.  +It is similar to [[https://openwrt.org/toh/xiaomi/mi_router_4a_mir4a_100m|MIR4A **Chinese version**]] but the R4AC **international version** <color #ed1c24>has a different flash layout</color>
- +
-It is similar to MIR4A but the R4AC international version has a different ROM layout+
 /*****/ /*****/
 /* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki */ /* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki */
 /*****/ /*****/
  
-{{media:xiaomi:photo_2021-11-14_12-39-11.jpg?200|Mi Router 4A 100M}} +{{media:xiaomi:xiaomi_mi_router_4a_mir4ac_international_100m.jpg?200|Mi Router 4A 100M (International version)}}
- +
- +
-===== OpenWrt support ===== +
- +
-<color orange>**WIP**</color> +
  
  
 ===== Supporting activities ===== ===== Supporting activities =====
  
-There are current changes which support and it were tested on an international version manufacturing date: 04/2021+There are current changes that add support for this device and it was tested on an international version manufacturing date: 04/2021
  
-SKU: DVB4230GL+**SKU**: DVB4230GL
  
   * OpenWrt forum thread: https://forum.openwrt.org/t/openwrt-bricks-xiaomi-mi-router-4a-mir4ac-100m-international-version/125759/27   * OpenWrt forum thread: https://forum.openwrt.org/t/openwrt-bricks-xiaomi-mi-router-4a-mir4ac-100m-international-version/125759/27
Line 34: Line 26:
  
  
-===== Experimental firmware =====+===== Supported Versions =====
  
-  * https://www.dropbox.com/s/rcd1jqm5bhovf2v/xiaomi-4a.zip?dl=1+<!-- ToH
 +  "source": "json", 
 +  "dom": "t", 
 +  "paging": false, 
 +  "rotate": true, 
 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"], 
 +  "filterColumns": {"brand": "^Xiaomi$", "model": "^Mi Router 4A \\(R4AC\\)$"
 +} -->
  
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
-FIXME +<!-- ToH: { 
- +  "source""json", 
----- datatable ---- +  "dom": "t", 
-cols    ModelVersionsCPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, ModemUSB ports_ +  "paging": false
-header  : ModelVersion,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "rotate"true
-align   c,c,c,c,c,c,c,c,c,c,c,c,c +  "shownColumns"["model""version""cpu""cpumhz""flashmb""rammb""wlanhardware""wlan24ghz""wlan50ghz""ethernet100mports""ethernet1gports""modem", "usbports"]
-filter  : Brand=Xiaomi +  "filterColumns"{"brand": "^Xiaomi$", "model""^Mi Router 4A \\(R4AC\\)$"} 
-filter  Model=Mi Router 4A (R4AC) +-->
-filter  : Versions~100M +
-----+
  
 ===== Installation ===== ===== Installation =====
-FIXME +<!-- ToH: { 
----- datatable ---- +  "source""json", 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url +  "dom": "t", 
-headers ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM Stock +  "paging": false, 
-align   : c,c,c +  "rotate": true
-filter  : Brand=Xiaomi +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""firmwareoemstockurl"]
-filter  Model=Mi Router 4A (R4AC) +  "filterColumns": {"brand""^Xiaomi$", "model""^Mi Router 4A \\(R4AC\\)$"} 
-filter  : Versions~100M +-->
-----+
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
Line 70: Line 66:
   - Go to [[http://192.168.31.1/]] and set up the router   - Go to [[http://192.168.31.1/]] and set up the router
   - Use [[https://github.com/acecilia/OpenWRTInvasion|OpenWRTInvasion]] to get a root-shell   - Use [[https://github.com/acecilia/OpenWRTInvasion|OpenWRTInvasion]] to get a root-shell
-  - Download the openwrt-sysupgrade-image to ''/tmp'' and write it to the flash with ''mtd -r write <image> OS1''+  - <color #ed1c24>Check the firmware layout with **cat /proc/mtd** and only proceed if **mtd6: 00200000 00010000 "overlay"**</color> 
 +  - Download the openwrt-**<color #ed1c24>sysupgrade</color>**-image to ''/tmp'' and write it to the flash with ''mtd -r write <image> OS1''
  
- +===== Upgrading OpenWrt ===== 
-/*** if info availableuncomment and fill in+->  [[docs:guide-user:installation:generic.sysupgrade]]
 ===== Debricking ===== ===== Debricking =====
 -> [[docs:guide-user:troubleshooting:generic.debrick]] -> [[docs:guide-user:troubleshooting:generic.debrick]]
-***/+ 
 +Using Mi Wifi Repair tool: 
 +[[http://www1.miwifi.com/miwifi_download.html|Mi Wifi download]] 
 +[[https://www.dropbox.com/s/bwkc11ntp2t8ryc/How%20to%20use%20MIWIFIRepairToolx86.pdf?dl=0|PDF guide]] (Note: This was written for R4A gigabit edition) \\ 
 +[[https://www.virustotal.com/gui/file/436e57a5e2daf1c5b4ece8851a7b7517c1fbc9e69acba8fac3806aa160f251b5/detection|Numerous antivirus tools report Mi Wifi Repair Tool (files date stamped January 2019) identify it as a 'Potentially Unwanted App' Unclear whether there is a genuine threat or it is a 'false positive'.]] 
 +\\  
 + 
 +[[https://forum.openwrt.org/t/xiaomi-r4ac-problems-installing-openwrt/82083/3|Link for v3.0.5 International firmware posted by 'TheCheshireMan']] 
 + 
 +[[https://hoddysguides.com/xiaomi-debrick-tools-all/#google_vignette|Hoddys Guide to Xiaomi Debricking Tools]] 
 + 
 +Global/International version Xiaomi Mi Router 4A (R4AC) 100m \\ 
 +2.18.215 to ----> 3.0.5 \\  
 +Revision for global> **DVB4230GL** (see label attached to cardboard shipping box)\\ 
 + 
 +Chinese Xiaomi Mi Router 4A (R4AC) \\ 
 +2.28 ----> 2.58 or 2.18.51 ----> 2.18.58 \\ 
 +Revision for China> **DVB4222CN** (see label attached to cardboard shipping box) 
  
  
Line 108: Line 123:
  
  
-/*** if info available: uncomment and fill in 
 ==== Buttons ==== ==== Buttons ====
 -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 Here, we merely name the buttons, so we can use them in the above Howto. Here, we merely name the buttons, so we can use them in the above Howto.
- 
-<WRAP BOX 600px> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. 
  
 The Xiaomi R4AC has the following buttons: The Xiaomi R4AC has the following buttons:
  
 ^ BUTTON                       ^ Event   ^ ^ BUTTON                       ^ Event   ^
-EXAMPLE Reset                |  reset  | +| Reset                |  reset  |
-| EXAMPLE Secure Easy Setup    |   ses   | +
-| EXAMPLE No buttons at all.      -    | +
-</WRAP> +
-***/+
  
  
 ===== Hardware ===== ===== Hardware =====
 +
 ==== Info ==== ==== Info ====
-^ Architecture     EXAMPLE MIPS                             +^ Architecture     | MIPS                                     
-^ Vendor           EXAMPLE Ralink                           +^ Vendor           Mediatek                                 
-^ Bootloader       EXAMPLE U-Boot                           +^ Bootloader       | U-Boot                                   
-^ System-On-Chip   EXAMPLE Ralink RT3052 - MIPS 24K V4.12   +^ System-On-Chip   MT7628DAN                                
-^ CPU/Speed        | EXAMPLE 451 MHz                          +^ CPU/Speed        | 575 MHz                                  
-^ Flash-Chip       EXAMPLE unkown                           +^ Flash-Chip       Winbond 25Q128JVSQ                       
-^ Flash size       EXAMPLE 8 MiB                            +^ Flash size       16 MiB                                   
-^ RAM              | EXAMPLE 64 MiB                           +^ RAM              | 64 MiB                                   
-^ Wireless         EXAMPLE RT2860v2 2.4GHz 802.11bgn        +^ Wireless         MT7628DAN 2.4GHz 802.11bgn               | 
-^ Ethernet         EXAMPLE 10/100 Mbit/w/ vlan support    +^ Wireless         | MT7612EN 5GHz an+ac                      
-^ Switch           EXAMPLE Qualcomm Atheros QCA8337         +^ Ethernet         | 10/100 Mbit/                           
-^ USB              | EXAMPLE 1x 2.0                           | +^ Switch           MT7628DAN                                
-^ Serial           | EXAMPLE [[#Serial|Yes]]                  | +
-^ JTAG             | EXAMPLE [[#JTAG|Not populated]]          |+
  
  
-/*** if info available: uncomment and fill in 
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).// 
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. +**Before OpenWrt** 
-</WRAP> + 
-***/+^ dev     ^ size       ^ erasesize   ^ name            ^ 
 +| mtd0    | 01000000   | 00010000    | "ALL"           | 
 +| mtd1    | 00020000   | 00010000    | "Bootloader"    | 
 +| mtd2    | 00010000   | 00010000    | "Config"        | 
 +| mtd3    | 00010000   | 00010000    | "Factory"       | 
 +| mtd4    | 00010000   | 00010000    | "crash"         | 
 +| mtd5    | 00010000   | 00010000    | "cfg_bak"       | 
 +| mtd6    | 00200000   | 00010000    | "overlay"       | 
 +| mtd7    | 00da0000   | 00010000    | "OS1"           | 
 +| mtd8    | 00c40000   | 00010000    | "rootfs"        
 + 
 +**After OpenWrt*
 + 
 +^ dev    ^ size       ^ erasesize   ^ name          ^ 
 +| mtd0   | 00020000    00010000   | "bootloader" 
 +| mtd1   | 00010000    00010000   | "config"      | 
 +| mtd2   | 00010000    00010000   | "factory"     | 
 +| mtd3   | 00010000    00010000   | "crash"       | 
 +| mtd4   | 00010000    00010000   | "cfg_bak"     | 
 +| mtd5   | 00200000    00010000   | "overlay"     | 
 +| mtd6   | 00da0000    00010000   | "firmware"    | 
 +| mtd7   | 001e9324    00010000   | "kernel"      | 
 +| mtd8   | 00bb6cdc    00010000   | "rootfs"      | 
 +| mtd9   | 00900000    00010000   | "rootfs_data"
 + 
 + 
 + 
  
  
Line 160: Line 191:
 /* Thanks, your wiki administration - Oct. 2015 */ /* Thanks, your wiki administration - Oct. 2015 */
  
-**Insert photo of front of the casing**+{{media:xiaomi:xiaomi_mi_router_4a_box_r4ac.jpeg?400|Box of international version}}
  
-**Insert photo of back of the casing**+{{media:xiaomi:xiaomi_mi_router_4a_inside_r4ac.jpeg?400|Inside of international version}} 
 + 
 +{{media:xiaomi:xiaomi_mi_router_4a_pcb_r4ac.jpeg?400|PCB of international version}} 
 + 
 +{{media:xiaomi:xiaomi_mi_router_4a_label_r4ac_int.jpg?500|Label of international version}} 
 + 
 +The following image is the label attached to the shipping box:\\ 
 +Note  **SKU:DVB4230GL**\\ 
 +{{media:xiaomi:xiaomi_mi_router_4a_label_r4ac.jpg?500|Shipping box Label of international version}}
  
-**Insert photo of backside label** 
  
-**Insert photo of PCB** 
  
 ==== Opening the case ==== ==== Opening the case ====
  
-<WRAP BOX> +**Note:** This will void your warranty! 
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws...// + 
-</WRAP>+To open the caseyou need to unscrew the two screws under the sticker and snap off the plastic clips around the perimeterUse a plastic spudger so as not to marr the casePlastic is soft and should yield easily. 
 + 
 +//Main PCB://\\ 
 +{{media:xiaomi:mi_router_4a_100m_pcb.jpg?200|Mi Router 4A 100M Main PCB}}
  
 ==== Serial ==== ==== Serial ====
Line 178: Line 218:
  
 How to connect to the Serial Port of this specific device:\\ How to connect to the Serial Port of this specific device:\\
-**Insert photo of PCB with markings for serial port**+{{media:xiaomi:xiaomi_mi_router_4a_box_jtag.png?400|Serial port of international version}}
  
-<WRAP BOX> +Connect PCB TX to USB-UART RX, and PCB RX to USB-UART TX, then GND. Don't connect +3.3V as this may power the router from the computer before you're ready.
-FIXME //Replace EXAMPLE by real values.// +
-</WRAP>+
  
-^ Serial connection parameters\\ for Xiaomi R4AC @@Version@@ EXAMPLE 115200, 8N1, 3.3V |+^ Serial connection parameters\\ for Xiaomi Mi Router 4A (R4AC) 100M International version| 115200, 8N1, Flow Control - NO |
  
 ==== JTAG ==== ==== JTAG ====
 -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
  
 +/*
 How to connect to the JTAG Port of this specific device:\\ How to connect to the JTAG Port of this specific device:\\
 **Insert photo of PCB with markings for JTAG port** **Insert photo of PCB with markings for JTAG port**
 +*/
 +
 +None so far; device doesn't have a readily-accessible JTAG port.
 +
 +
 +===== Bootloader mods =====
 +-> [[docs:techref:bootloader]]
 +
 +None so far.
 +
 +===== Hardware mods =====
 +
 +None so far.
  
 ===== Bootlogs ===== ===== Bootlogs =====
 +
 +
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki> +<nowiki> 
-</WRAP>\\+[03010D09][03010D0E][87850000][33325654][00333257] 
 + 
 +DU Setting Cal Done 
 + 
 + 
 + 
 +U-Boot 1.1.3 (Feb 28 2020 - 07:20:39) 
 + 
 + 
 +Board: Ralink APSoC DRAM:  64 MB 
 + 
 +Power on memory test. Memory size= 64 MB...OK! 
 + 
 +relocate_code Pointer at: 83fb0000 
 + 
 +RT2880_RSTSTAT_REG 0xc0030000 
 + 
 +*************************** 
 + 
 +Board power on Occurred 
 + 
 +*************************** 
 + 
 +flash manufacture id: ef, device id 40 18 
 + 
 +find flash: W25Q128BV 
 + 
 +env is right! 
 + 
 +============================================  
 + 
 +Ralink UBoot Version: 4.3.0.0 
 + 
 +--------------------------------------------  
 + 
 +ASIC 7628_MP (Port5<->None) 
 + 
 +DRAM component: 512 Mbits DDR, width 16 
 + 
 +DRAM bus: 16 bit 
 + 
 +Total memory: 64 MBytes 
 + 
 +Flash component: SPI Flash 
 + 
 +Date:Feb 28 2020  Time:07:20:39 
 + 
 +============================================  
 + 
 +icache: sets:512, ways:4, linesz:32 ,total:65536 
 + 
 +dcache: sets:256, ways:4, linesz:32 ,total:32768  
 + 
 + 
 + ##### The CPU freq = 575 MHZ ####  
 + 
 + estimate memory size =64 Mbytes 
 + 
 +RESET MT7628 PHY!!!!!! 
 + 
 +Please choose the operation:  
 + 
 +   1: Load system code to SDRAM via TFTP.  
 + 
 +   2: Load system code then write to Flash via TFTP.  
 + 
 +   3: Boot system code via Flash (default). 
 + 
 +   4: Entr boot command line interface. 
 + 
 +   9: Load Boot Loader code then write to Flash via TFTP.  
 + 
 + 
 +   n3: System Boot system code via Flash. 
 + 
 +Booting System 1 
 + 
 +Erasing SPI Flash... 
 + 
 +raspi_erase: offs:20000 len:10000 
 + 
 +
 + 
 +Writing to SPI Flash... 
 + 
 +
 + 
 +done 
 + 
 +## Booting image at bc260000 ... 
 + 
 +   Image Name:   MIPS OpenWrt Linux-3.10.14 
 + 
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 + 
 +   Data Size:    1424948 Bytes =  1.4 MB 
 + 
 +   Load Address: 80000000 
 + 
 +   Entry Point:  80000000 
 + 
 +   Verifying Checksum ... OK 
 + 
 +   Uncompressing Kernel Image ... OK 
 + 
 +Erasing SPI Flash... 
 + 
 +raspi_erase: offs:20000 len:10000 
 + 
 +
 + 
 +Writing to SPI Flash... 
 + 
 +
 + 
 +done 
 + 
 +commandline uart_en=0 factory_mode=0 mem=64m root=/dev/mtdblock8 
 + 
 +No initrd 
 + 
 +## Transferring control to Linux (at address 80000000) ... 
 + 
 +## Giving linux memsize in MB, 64 
 + 
 + 
 +Starting kernel ... 
 + 
 + 
 + 
 +LINUX started... 
 + 
 + THIS IS ASIC 
 +[    0.000000] Initializing cgroup subsys cpuset 
 +[    0.000000] Initializing cgroup subsys cpu 
 +[    0.000000] Linux version 3.10.14 (jenkins@27cfea1571da) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 MiWiFi-R4AC-3.0.5 Fri Feb 28 07:32:29 UTC 2020 
 +[    0.000000]  
 +[    0.000000]  The CPU feqenuce set to 575 MHz 
 +[    0.000000]  
 +[    0.000000]  MIPS CPU sleep mode enabled. 
 +[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) 
 +[    0.000000] Software DMA cache coherency 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 04000000 @ 00000000 (usable) 
 +[    0.000000] User-defined physical RAM map: 
 +[    0.000000]  memory: 04000000 @ 00000000 (usable) 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x00000000-0x03ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x00000000-0x03ffffff] 
 +[    0.000000] Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +[    0.000000] Kernel command line: console=ttyS1,115200n8 uart_en=0 factory_mode=0 mem=64m root=/dev/mtdblock8 
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) 
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Writing ErrCtl register=0006b9d7 
 +[    0.000000] Readback ErrCtl register=0006b9d7 
 +[    0.000000] allocated 131072 bytes of page_cgroup 
 +[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups 
 +[    0.000000] Memory: 60488k/65536k available (3212k kernel code, 5048k reserved, 723k data, 220k init, 0k highmem) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS:128 
 +[    0.000000] console [ttyS1] enabled 
 +[    0.120000] Calibrating delay loop... 380.92 BogoMIPS (lpj=1904640) 
 +[    0.180000] pid_max: default: 32768 minimum: 301 
 +[    0.180000] Mount-cache hash table entries: 512 
 +[    0.190000] Initializing cgroup subsys memory 
 +[    0.190000] Initializing cgroup subsys net_cls 
 +[    0.200000] NET: Registered protocol family 16 
 +[    0.200000] RALINK_GPIOMODE = 54054404  
 +[    0.210000] RALINK_GPIOMODE = 54044404  
 +[    0.310000] ***** Xtal 25MHz ***** 
 +[    0.310000] start PCIe register access 
 +[    0.810000] RALINK_RSTCTRL = 2400000 
 +[    0.820000] RALINK_CLKCFG1 = fdbfffc0 
 +[    0.820000]  
 +[    0.820000] *************** MT7628 PCIe RC mode ************* 
 +[    1.320000] PCIE0 enabled 
 +[    1.320000] Port 0 N_FTS = 1b105000 
 +[    1.330000] init_rt2880pci done 
 +[    1.350000] bio: create slab <bio-0> at 0 
 +[    1.360000] PCI host bridge to bus 0000:00 
 +[    1.360000] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] 
 +[    1.370000] pci_bus 0000:00: root bus resource [io  0x10160000-0x1016ffff] 
 +[    1.370000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +[    1.380000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.380000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) 
 +[    1.390000] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] 
 +[    1.390000] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref] 
 +[    1.400000] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] 
 +[    1.400000] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] 
 +[    1.410000] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref] 
 +[    1.410000] pci 0000:00:00.0: PCI bridge to [bus 01] 
 +[    1.420000] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff] 
 +[    1.420000] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref] 
 +[    1.430000] BAR0 at slot 0 = 0 
 +[    1.430000] bus=0x0, slot = 0x0 
 +[    1.430000] res[0]->start = 0 
 +[    1.430000] res[0]->end = 0 
 +[    1.440000] res[1]->start = 20200000 
 +[    1.440000] res[1]->end = 2020ffff 
 +[    1.440000] res[2]->start = 0 
 +[    1.450000] res[2]->end = 0 
 +[    1.450000] res[3]->start = 0 
 +[    1.450000] res[3]->end = 0 
 +[    1.450000] res[4]->start = 0 
 +[    1.460000] res[4]->end = 0 
 +[    1.460000] res[5]->start = 0 
 +[    1.460000] res[5]->end = 0 
 +[    1.460000] bus=0x1, slot = 0x0 
 +[    1.470000] res[0]->start = 20000000 
 +[    1.470000] res[0]->end = 200fffff 
 +[    1.470000] res[1]->start = 0 
 +[    1.480000] res[1]->end = 0 
 +[    1.480000] res[2]->start = 0 
 +[    1.480000] res[2]->end = 0 
 +[    1.480000] res[3]->start = 0 
 +[    1.490000] res[3]->end = 0 
 +[    1.490000] res[4]->start = 0 
 +[    1.490000] res[4]->end = 0 
 +[    1.490000] res[5]->start = 0 
 +[    1.500000] res[5]->end = 0 
 +[    1.500000] cfg80211: Calling CRDA to update world regulatory domain 
 +[    1.510000] Switching to clocksource Ralink Systick timer 
 +[    1.510000] NET: Registered protocol family 2 
 +[    1.520000] TCP established hash table entries: 512 (order: 0, 4096 bytes) 
 +[    1.520000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) 
 +[    1.530000] TCP: Hash tables configured (established 512 bind 512) 
 +[    1.530000] TCP: reno registered 
 +[    1.540000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    1.540000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    1.550000] NET: Registered protocol family 1 
 +[    1.570000] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    1.580000] jffs2: version 2.2. (ZLIB) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    1.580000] msgmni has been set to 118 
 +[    1.590000] io scheduler noop registered 
 +[    1.590000] io scheduler deadline registered (default) 
 +[    1.600000] MIWIFI panic notifier registered 
 +[    1.600000] pcieport 0000:00:00.0: device [14c3:0801] has invalid IRQ; check vendor BIOS 
 +[    1.620000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +[    1.620000] serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A 
 +[    1.630000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A 
 +[    1.640000] led=44, on=4000, off=1, blinks,=1, reset=1, time=4000 
 +[    1.640000] Ralink gpio driver initialized 
 +[    1.650000] flash manufacture id: ef, device id 40 18 
 +[    1.650000] W25Q128BV(ef 40180000) (16384 Kbytes) 
 +[    1.660000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 
 +[    1.670000] Creating 8 MTD partitions on "raspi": 
 +[    1.670000] 0x000000000000-0x000001000000 : "ALL" 
 +[    1.680000] 0x000000000000-0x000000020000 : "Bootloader" 
 +[    1.690000] 0x000000020000-0x000000030000 : "Config" 
 +[    1.690000] 0x000000030000-0x000000040000 : "Factory" 
 +[    1.700000] 0x000000040000-0x000000050000 : "crash" 
 +[    1.710000] 0x000000050000-0x000000060000 : "cfg_bak" 
 +[    1.710000] 0x000000060000-0x000000260000 : "overlay" 
 +[    1.720000] 0x000000260000-0x000001000000 : "OS1" 
 +[    1.730000] mtd: try split OS1 partition 
 +[    1.730000] mtd: split_firmware 
 +[    1.730000] mtd: firmware_partition->size   0xda0000 
 +[    1.740000] mtd: firmware_partition->offset 0x260000 
 +[    1.740000] mtd: uimage_len 1425012 
 +[    1.750000] mtd: uimage_len 1441792 
 +[    1.750000] mtd: rootfs_partition->size   0xc40000 
 +[    1.760000] mtd: rootfs_partition->offset 0x3c0000 
 +[    1.760000] mtd: partition "rootfs" created automatically, ofs=3C0000, len=C40000  
 +[    1.770000] 0x0000003c0000-0x000001000000 : "rootfs" 
 +[    1.780000] PPP generic driver version 2.4.2 
 +[    1.780000] PPP MPPE Compression module registered 
 +[    1.790000] NET: Registered protocol family 24 
 +[    1.790000] PPTP driver version 0.8.5 
 +[    1.800000] GMAC1_MAC_ADRH -- : 0x000088c3 
 +[    1.800000] GMAC1_MAC_ADRL -- : 0x97XXXXXX 
 +[    1.800000] Ralink APSoC Ethernet Driver Initilization. v3.1  256 rx/tx descriptors allocated, mtu = 1500! 
 +[    1.810000] GMAC1_MAC_ADRH -- : 0x000088c3 
 +[    1.820000] GMAC1_MAC_ADRL -- : 0x97XXXXXX 
 +[    1.820000] PROC INIT OK! 
 +[    1.830000] Ralink APSoC Hardware Watchdog Timer 
 +[    1.830000] Mirror/redirect action on 
 +[    1.830000] u32 classifier 
 +[    1.840000]     input device check on 
 +[    1.840000]     Actions configured 
 +[    1.840000] Netfilter messages via NETLINK v0.30. 
 +[    1.850000] nfnl_acct: registering with nfnetlink. 
 +[    1.850000] nf_conntrack version 0.5.0 (945 buckets, 3780 max) 
 +[    1.860000] ipip: IPv4 over IPv4 tunneling driver 
 +[    1.870000] gre: GRE over IPv4 demultiplexor driver 
 +[    1.870000] ip_gre: GRE over IPv4 tunneling driver 
 +[    1.880000] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[    1.880000] Type=Restricted Cone 
 +[    1.890000] TCP: cubic registered 
 +[    1.890000] NET: Registered protocol family 10 
 +[    1.900000] NET: Registered protocol family 17 
 +[    1.900000] l2tp_core: L2TP core driver, V2.0 
 +[    1.910000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 
 +[    1.910000] l2tp_netlink: L2TP netlink interface 
 +[    1.920000] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.940000] VFS: Mounted root (squashfs filesystem) readonly on device 31:8. 
 +[    1.950000] Freeing unused kernel memory: 220K (803d9000 - 80410000) 
 +config core 'version' 
 + # ROM ver 
 + option ROM '3.0.5' 
 + # channel 
 + option CHANNEL 'release' 
 + # hardware platform R1AC or R1N etc. 
 + option HARDWARE 'R4AC' 
 + # CFE ver 
 + option UBOOT '1.0.0' 
 + # Linux Kernel ver 
 + option LINUX '0.0.1' 
 + # RAMFS ver 
 + option RAMFS '0.0.1' 
 + # SQUASHFS ver 
 + option SQAFS '0.0.1' 
 + # ROOTFS ver 
 + option ROOTFS '0.0.1' 
 + #build time 
 + option BUILDTIME 'Fri, 28 Feb 2020 07:19:54 +0000' 
 + #build timestamp 
 + option BUILDTS '1582874394' 
 + #build git tag 
 + option GTAG 'commit c6309716fe8a0c6d75bc2c4d879243fcdc588833' 
 +[    3.720000] Raeth v3.1 (Tasklet,SkbRecycle) 
 +[    3.720000]  
 +[    3.720000] phy_tx_ring = 0x03420000, tx_ring = 0xa3420000 
 +[    3.730000]  
 +[    3.730000] phy_rx_ring0 = 0x03421000, rx_ring0 = 0xa3421000 
 +[    3.750000] config 7628 esw as WLLLL 
 +[    3.830000] GMAC1_MAC_ADRH -- : 0x000088c3 
 +[    3.830000] GMAC1_MAC_ADRL -- : 0x97XXXXXX 
 +[    3.840000]  Link Status Changed: Port 6 linked Up. 
 +- preinit - 
 +Fri Feb 28 07:32:29 UTC 2020 
 +- regular preinit - 
 +/lib/preinit.sh: line 1: pi_indicate_led: not found 
 +jffs2 not ready yet; using ramdisk 
 +-----------------------------do_data_mount_fail_recover 
 +1+0 records in 
 +1+0 records out 
 +- init - 
 +[    5.610000] ra2880stop()...Done 
 +[    5.610000] Free TX/RX Ring Memory! 
 + 
 +init started: BusyBox v1.19.4 (2020-02-28 07:17:56 UTC) 
 + 
 +Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 65 seconds. 
 +[    5.960000] MIWIFI crash syslog initialize skiped! Code=1 
 +[    7.680000] xt_time: kernel timezone is +0800 
 +[    7.820000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[    7.950000] nf_nat_amanda: Unknown symbol nf_nat_amanda_hook (err 0) 
 +[    8.050000] ip_set: protocol 6 
 +[    8.100000] ipaccount: ifname [lo] event[5] 
 +[    8.100000] ipaccount: ifname [ifb0] event[5] 
 +[    8.110000] ipaccount: ifname [eth0] event[5] 
 +[    8.110000] ipaccount: ifname [tunl0] event[5] 
 +[    8.120000] ipaccount: ifname [gre0] event[5] 
 +[    8.120000] ipaccount: ifname [gretap0] event[5] 
 +[    8.130000] dev_redirect OFF.dev_redirect load success.  
 +[    9.280000]  
 +[    9.280000]  
 +[    9.280000] === pAd = c0680000, size = 1763448 === 
 +[    9.280000]  
 +[    9.290000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x 
 +[    9.300000] <-- RTMPAllocAdapterBlock, Status=0 
 +[    9.300000] RtmpChipOpsHook(492): Not support for HIF_MT yet! 
 +[    9.310000] mt7628_init()--> 
 +[    9.310000] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628)) 
 +[    9.310000] e2.bin mt7628_init(1120)::(2), pChipCap->fw_len(63984) 
 +[    9.320000] mt_bcn_buf_init(218): Not support for HIF_MT yet! 
 +[    9.330000] <--mt7628_init() 
 +[    9.330000] ipaccount: ifname [wl1] event[16] 
 +[    9.340000] ipaccount: ifname [wl1] event[5] 
 +[   10.400000] <-- RTMPAllocTxRxRingMemory, Status=0 
 +[   10.420000] <-- RTMPAllocAdapterBlock, Status=0 
 +[   10.430000] pAd->CSRBaseAddress =0xc0c00000, csr_addr=0xc0c00000! 
 +[   10.430000] <dbg> MAC_CSR0=1986146304, RtmpChipOpsHook 
 +[   10.440000] <dbg> dev idx = 1! 
 +[   10.440000] <dbg> get_dev_config_idx pAd->MACVersion = 76623000, pAd->ChipID = 76120044 
 +[   10.450000] ipaccount: ifname [wl0] event[16] 
 +[   10.460000] ipaccount: ifname [wl0] event[5] 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: INFO: loading exist /etc/config/network. 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: config interface 'loopback' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ifname 'lo' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option proto 'static' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ipaddr '127.0.0.1' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option netmask '255.0.0.0' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: config interface 'lan' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ifname 'eth0.1' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option type 'bridge' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option proto 'static' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ipaddr '192.168.31.1' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option netmask '255.255.255.0' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ip6assign '64' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: list ip6class 'ifb' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: config interface 'wan' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ifname 'eth0.2' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option proto 'dhcp' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: config interface 'ifb' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ifname 'ifb0' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: config interface 'ready' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option proto 'static' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ipaddr '169.254.29.1' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option netmask '255.255.255.0' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: config interface 'openvpn' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option ifname 'tun0' 
 +Fri Feb 28 08:32:36 CET 2020 netconfig[741]: option proto 'openvpn' 
 +[   14.420000] ipaccount: ifname [br-lan] event[16] 
 +[   14.430000] ipaccount: ifname [br-lan] event[5] 
 +[   14.440000] ipaccount: ifname [eth0] event[13] 
 +[   14.440000] Raeth v3.1 (Tasklet,SkbRecycle) 
 +[   14.450000]  
 +[   14.450000] phy_tx_ring = 0x0218d000, tx_ring = 0xa218d000 
 +[   14.450000]  
 +[   14.450000] phy_rx_ring0 = 0x0219b000, rx_ring0 = 0xa219b000 
 +[   14.470000] config 7628 esw as WLLLL 
 +[   14.550000] GMAC1_MAC_ADRH -- : 0x000088c3 
 +[   14.550000] GMAC1_MAC_ADRL -- : 0x97XXXXXX 
 +[   14.560000] ipaccount: ifname [eth0] event[1] 
 +[   14.590000] ipaccount: ifname [eth0.1] event[16] 
 +[   14.590000] ipaccount: ifname [eth0.1] event[5] 
 +[   14.610000] ipaccount: ifname [eth0.1] event[13] 
 +[   14.610000] ipaccount: ifname [eth0.1] event[1] 
 +[   14.630000] ipaccount: ifname [eth0.1] event[20] 
 +[   14.630000] device eth0.1 entered promiscuous mode 
 +[   14.640000] device eth0 entered promiscuous mode 
 +[   14.640000] ipaccount: ifname [br-lan] event[11] 
 +[   14.640000] ipaccount: ifname [br-lan] event[8] 
 +[   14.680000] ipaccount: ifname [br-lan] event[8] 
 +[   14.680000] ipaccount: ifname [br-lan] event[13] 
 +[   14.690000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   14.690000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   14.700000] ipaccount: ifname [br-lan] event[1] 
 +[   14.720000] ipaccount: ifname [ifb0] event[13] 
 +[   14.730000] ipaccount: ifname [ifb0] event[1] 
 +[   14.760000] ipaccount: ifname [lo] event[13] 
 +[   14.760000] ipaccount: ifname [lo] event[1] 
 +[   14.770000] ipaccount: ifname [eth0.2] event[16] 
 +[   14.780000] ipaccount: ifname [eth0.2] event[5] 
 +[   14.810000] ipaccount: ifname [eth0.2] event[13] 
 +[   14.810000] ipaccount: ifname [eth0.2] event[1] 
 +[   15.440000] ipaccount: ifname [eth0.1] event[4] 
 +[   15.440000] ipaccount: ifname [br-lan] event[4] 
 +[   15.440000] ipaccount: ifname [eth0.2] event[4] 
 +[   16.690000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   17.440000] ipaccount: ifname [wl0] event[13] 
 +[   17.450000] <dbg> MAC_CSR0=1986146304, rtmp_asic_top_init 
 +[   17.500000] Set defult RDRegion value:  CountryCode=EU 11 
 +[   19.420000] <==== rt28xx_init, Status=0 
 +[   19.420000] ipaccount: ifname [apclii0] event[16] 
 +[   19.430000] ipaccount: ifname [apclii0] event[5] 
 +[   19.430000] ipaccount: ifname [wl0] event[1] 
 +[   21.340000] ipaccount: ifname [wl0] event[20] 
 +[   21.350000] device wl0 entered promiscuous mode 
 +[   21.350000] br-lan: port 2(wl0) entered forwarding state 
 +[   21.360000] br-lan: port 2(wl0) entered forwarding state 
 +[   23.360000] br-lan: port 2(wl0) entered forwarding state 
 +[   23.930000] ipaccount: ifname [wl1] event[13] 
 +[   23.930000] TX_BCN DESC a366a000 size = 320 
 +[   23.940000] RX[0] DESC a366c000 size = 2048 
 +[   23.940000] RX[1] DESC a366d000 size = 1024 
 +[   23.950000] E2pAccessMode=2 
 +[   23.960000] cfg_mode=9 
 +[   23.960000] cfg_mode=9 
 +[   23.960000] wmode_band_equal(): Band Equal! 
 +[   24.040000] load fw image from fw_header_image 
 +[   24.040000] AndesMTLoadFwMethod1(2181)::pChipCap->fw_len(63984) 
 +[   24.050000] CmdAddressLenReq:(ret = 0) 
 +[   24.050000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.060000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.070000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.070000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.080000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.080000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.090000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.090000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.100000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.100000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.110000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.110000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.120000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.120000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.130000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.130000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:
 +[   24.140000] CmdFwStartReq: override = 1, address = 1048576 
 +[   24.140000] CmdStartDLRsp: WiFI FW Download Success 
 +[   24.180000] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) 
 +[   24.180000] efuse_probe: efuse = 10000002 
 +[   24.190000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4 
 +[   24.190000] RtmpEepromGetDefault::e2p_dafault=2 
 +[   24.200000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2 
 +[   24.200000] NVM is FLASH mode 
 +[   24.210000] 1. Phy Mode = 14 
 +[   24.410000] Country Region from e2p = ffff 
 +[   24.420000] tssi_1_target_pwr_g_band = 22 
 +[   24.420000] 2. Phy Mode = 14 
 +[   24.430000] 3. Phy Mode = 14 
 +[   24.430000] NICInitPwrPinCfg(11): Not support for HIF_MT yet! 
 +[   24.430000] NICInitializeAsic(652): Not support rtmp_mac_sys_reset () for HIF_MT yet! 
 +[   24.440000] mt_mac_init()--> 
 +[   24.450000] MtAsicInitMac()--> 
 +[   24.710000] mt7628_init_mac_cr()--> 
 +[   24.710000] MtAsicSetMacMaxLen(1279): Set the Max RxPktLen=1024! 
 +[   24.720000] <--mt_mac_init() 
 +[   24.720000] WTBL Segment 1 info: 
 +[   24.730000] MemBaseAddr/FID:0x28000/
 +[   24.730000] EntrySize/Cnt:32/128 
 +[   24.730000] WTBL Segment 2 info: 
 +[   24.740000] MemBaseAddr/FID:0x40000/
 +[   24.740000] EntrySize/Cnt:64/128 
 +[   24.740000] WTBL Segment 3 info: 
 +[   24.750000] MemBaseAddr/FID:0x42000/64 
 +[   24.750000] EntrySize/Cnt:64/128 
 +[   24.750000] WTBL Segment 4 info: 
 +[   24.760000] MemBaseAddr/FID:0x44000/128 
 +[   24.760000] EntrySize/Cnt:32/128 
 +[   24.770000] AntCfgInit(2925): Not support for HIF_MT yet! 
 +[   24.770000] MCS Set = ff ff 00 00 00 
 +[   24.770000] MtAsicSetChBusyStat(846): Not support for HIF_MT yet! 
 +[   27.560000] MtAsicSetRalinkBurstMode(2971): Not support for HIF_MT yet! 
 +[   27.560000] MtAsicSetPiggyBack(783): Not support for HIF_MT yet! 
 +[   27.590000] MtAsicSetTxPreamble(2950): Not support for HIF_MT yet! 
 +[   27.600000] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 
 +[   27.600000] Main bssid = 88:c3:97:XX:XX:XX 
 +[   27.610000] <==== rt28xx_init, Status=0 
 +[   27.610000] ipaccount: ifname [wl2] event[16] 
 +[   27.620000] ipaccount: ifname [wl2] event[5] 
 +[   27.620000] ipaccount: ifname [wl3] event[16] 
 +[   27.630000] ipaccount: ifname [wl3] event[5] 
 +[   27.630000] ipaccount: ifname [apcli0] event[16] 
 +[   27.640000] ipaccount: ifname [apcli0] event[5] 
 +[   27.640000] ipaccount: ifname [apcli1] event[16] 
 +[   27.650000] ipaccount: ifname [apcli1] event[5] 
 +[   27.650000] !!!mt7628_xq_board=R4AC!!! 
 +[   27.650000] ipaccount: ifname [wl1] event[1] 
 +[   27.660000] CmdSlotTimeSet start 
 +[   27.700000] CmdSlotTimeSet end 
 +[   30.190000] ipaccount: ifname [wl1] event[20] 
 +[   30.190000] device wl1 entered promiscuous mode 
 +[   30.200000] br-lan: port 3(wl1) entered forwarding state 
 +[   30.210000] br-lan: port 3(wl1) entered forwarding state 
 +[   30.230000] ipaccount: ifname [wl2] event[13] 
 +[   30.240000] ##### mbss_cr_enable, BssId = 1 
 +[   30.240000] ipaccount: ifname [wl2] event[1] 
 +[   32.210000] br-lan: port 3(wl1) entered forwarding state 
 +[   32.290000] enable ip account module. 
 +rcS S calling: /etc/rc.d/S20network boot: WARNING: EXITCODE=0, execute too slow, 20 >= 15: /etc/rc.d/S20network boot 
 +[   32.630000] dev_redirect: add(+) dev redirect mapping: src:eth0.2->dst:ifb0 
 +Fri Feb 28 08:33:09 CET 2020 boot_check[3035]: INFO: Wireless OK 
 +[   45.090000] dev_redirect: add(+) dev redirect mapping: src:eth0.2->dst:ifb0 
 +[   46.390000] ipaccount: refresh dev ifname to [eth0 wl0 wl1 wl3]  
 +[   46.400000] ipaccount: landev_init_all() add dev [eth0] is_wireless: 0. 
 +[   46.410000] ipaccount: landev_init_all() add dev [wl0] is_wireless: 1. 
 +[   46.410000] ipaccount: landev_init_all() add dev [wl1] is_wireless: 1. 
 +[   46.420000] ipaccount: landev_init_all() add dev [wl3] is_wireless: 1. 
 +[   46.480000] dev_redirect OFF. 
 +[   46.570000] dev_redirect OFF.dev_redirect OFF. 
 +[   48.330000] dev_redirect OFF.dev_redirect OFF.ipaccount: landev_init_all() add dev [eth0] is_wireless: 0. 
 +[   49.630000] ipaccount: landev_init_all() add dev [wl0] is_wireless: 1. 
 +[   49.640000] ipaccount: landev_init_all() add dev [wl1] is_wireless: 1. 
 +[   49.640000] ipaccount: landev_init_all() add dev [wl3] is_wireless: 1. 
 +[   51.410000] xqfp: forward hooks init success! 
 +[   51.420000] xqfp:pre hooks init success! 
 +[   51.420000] xqfp:extend init success! 
 +[   51.430000] xqfp: register_netdevice_notifier_v3! 
 +[   51.430000] xqfp: module init success! 
 +rcS S boot: INFO: rcS S boot timing 44 seconds. 
 +Fri Feb 28 08:33:18 CET 2020 INFO: rcS S boot timing 44 seconds. 
 +rcS S boot: system type(R4AC/2): SQUASH/3 
 +Fri Feb 28 08:33:19 CET 2020 system type(R4AC/2): SQUASH/3 
 +rcS S boot: ROOTFS: /dev/root on / type squashfs (ro,relatime) 
 +Fri Feb 28 08:33:19 CET 2020 ROOTFS: /dev/root on / type squashfs (ro,relatime) 
 +[   54.600000] led=44, on=1, off=4000, blinks,=1, reset=1, time=4000 
 +[   54.600000] led=11, on=1, off=4000, blinks,=1, reset=1, time=4000 
 +[   54.630000] led=44, on=1, off=4000, blinks,=1, reset=1, time=4000 
 +[   54.870000] led=11, on=4000, off=1, blinks,=1, reset=1, time=4000 
 +uci: Entry not found 
 +Fri Feb 28 08:33:21 CET 2020 boot_check[4138]: Booting up finished. 
 +[   61.720000] Started WatchDog Timer. 
 + 
 +</nowiki> 
 +</WRAP>
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
Line 204: Line 840:
  
 ===== Notes ===== ===== Notes =====
 +[[https://forum.openwrt.org/t/xiaomi-mi-router-4a-mir4ac-100m-international-version-bricked-and-cant-unbrick/134430|R4AC with v3.0.10 bricked when downgrading to v3.0.5]]
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG unsupported}}+{{tag>MIPS ramips Mediatek mt7628an wlan 802.11abgn 802.11a 802.11bgn 802.11ac fastethernet 3port 16Flash 64RAM Serial U-Boot}}
  • Last modified: 2024/12/20 21:52
  • by frollic