Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revisionBoth sides next revision
inbox:toh:wavlink:ws-wn572hp3_a-v1.4 [2024/12/13 14:04] – [Table] weehuddyinbox:toh:wavlink:ws-wn572hp3_a-v1.4 [2024/12/14 21:45] – [OpenWrt bootlog] weehuddy
Line 1851: Line 1851:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>[    0.000000] Linux version 6.6.65 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28330-15e173bf7e) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Dec 13 20:40:02 2024 
 +[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 
 +[    0.000000] printk: bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.000000] MIPS: machine is Wavlink WS-WN572HP3 4G 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] VPE topology {2,2} total 4 
 +[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] percpu: Embedded 12 pages/cpu s19136 r8192 d21824 u49152 
 +[    0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 +[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) 
 +[    0.000000] Writing ErrCtl register=0000ac00 
 +[    0.000000] Readback ErrCtl register=0000ac00 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 117208K/131072K available (8376K kernel code, 657K rwdata, 1776K rodata, 1276K init, 229K bss, 13864K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] NR_IRQS: 256 
 +[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. 
 +[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns 
 +[    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns 
 +[    0.008064] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) 
 +[    0.066213] pid_max: default: 32768 minimum: 301 
 +[    0.079586] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.086829] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.103362] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. 
 +[    0.113179] rcu: Hierarchical SRCU implementation. 
 +[    0.117886] rcu: Max phase no-delay instances is 1000. 
 +[    0.123958] smp: Bringing up secondary CPUs ... 
 +[    0.129320] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.129350] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.129364] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.129412] CPU1 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.183360] Synchronize counters for CPU 1: done. 
 +[    0.215431] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.215456] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.215470] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.215504] CPU2 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.274687] Synchronize counters for CPU 2: done. 
 +[    0.305417] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.305443] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.305457] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.305494] CPU3 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.359902] Synchronize counters for CPU 3: done. 
 +[    0.389777] smp: Brought up 1 node, 4 CPUs 
 +[    0.400791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.410606] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) 
 +[    0.421433] pinctrl core: initialized pinctrl subsystem 
 +[    0.429964] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
 +[    0.436657] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.442638] FPU Affinity set after 11720 emulations 
 +[    0.460781] clocksource: Switched to clocksource GIC 
 +[    0.475790] NET: Registered PF_INET protocol family 
 +[    0.480908] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.489633] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +[    0.497970] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.505687] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.513332] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) 
 +[    0.520432] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.527764] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.535298] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.541817] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.549704] NET: Registered PF_UNIX/PF_LOCAL protocol family 
 +[    0.555389] PCI: CLS 0 bytes, default 32 
 +[    0.563208] workingset: timestamp_bits=14 max_order=15 bucket_order=1 
 +[    0.570893] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.576645] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.592505] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) 
 +[    0.603878] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.609862] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.615898] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.622112] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: 
 +[    0.628756] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff] 
 +[    0.637537] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000 
 +[    0.645644] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000 
 +[    1.010781] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) 
 +[    1.017685] mt7621-pci 1e140000.pcie: PCIE0 enabled 
 +[    1.022569] mt7621-pci 1e140000.pcie: PCIE1 enabled 
 +[    1.027523] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 
 +[    1.034677] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 
 +[    1.041013] pci_bus 0000:00: root bus resource [bus 00-ff] 
 +[    1.046421] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] 
 +[    1.053272] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] 
 +[    1.059433] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 
 +[    1.065389] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] 
 +[    1.071623] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] 
 +[    1.077862] pci 0000:00:00.0: supports D1 
 +[    1.081808] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
 +[    1.088297] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 
 +[    1.094354] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] 
 +[    1.100546] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] 
 +[    1.106871] pci 0000:00:01.0: supports D1 
 +[    1.110828] pci 0000:00:01.0: PME# supported from D0 D1 D3hot 
 +[    1.118555] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.126553] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.134775] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 
 +[    1.140823] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] 
 +[    1.147155] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold 
 +[    1.153575] pci 0000:00:00.0: PCI bridge to [bus 01-ff] 
 +[    1.158741] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.164848] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
 +[    1.171572] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref] 
 +[    1.178712] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 
 +[    1.185569] pci 0000:02:00.0: [14c3:7663] type 00 class 0x000280 
 +[    1.191596] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] 
 +[    1.198746] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] 
 +[    1.205949] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] 
 +[    1.213227] pci 0000:02:00.0: supports D1 D2 
 +[    1.217406] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
 +[    1.224039] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) 
 +[    1.239151] pci 0000:00:01.0: PCI bridge to [bus 02-ff] 
 +[    1.244367] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.250379] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff] 
 +[    1.257162] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref] 
 +[    1.264322] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 
 +[    1.270933] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] 
 +[    1.277448] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] 
 +[    1.284390] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] 
 +[    1.290959] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] 
 +[    1.297846] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] 
 +[    1.304607] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] 
 +[    1.311791] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] 
 +[    1.318490] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x604fffff pref] 
 +[    1.325692] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff] 
 +[    1.332437] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff] 
 +[    1.339141] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff] 
 +[    1.345219] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff] 
 +[    1.351275] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] 
 +[    1.357979] pci 0000:00:00.0: PCI bridge to [bus 01] 
 +[    1.362930] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.368948] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff] 
 +[    1.375726] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref] 
 +[    1.382895] pci 0000:02:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit pref] 
 +[    1.390559] pci 0000:02:00.0: BAR 2: assigned [mem 0x60400000-0x60403fff 64bit pref] 
 +[    1.398282] pci 0000:02:00.0: BAR 4: assigned [mem 0x60404000-0x60404fff 64bit pref] 
 +[    1.405968] pci 0000:00:01.0: PCI bridge to [bus 02] 
 +[    1.410887] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff] 
 +[    1.416899] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff] 
 +[    1.423666] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x604fffff pref] 
 +[    1.432560] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 
 +[    1.448979] printk: console [ttyS0] disabled 
 +[    1.454249] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A 
 +[    1.463408] printk: console [ttyS0] enabled 
 +[    1.471771] printk: bootconsole [early0] disabled 
 +[    1.486511] spi-mt7621 1e000b00.spi: sys_freq: 220000000 
 +[    1.493447] spi-nor spi0.0: spi-nor-generic (16384 Kbytes) 
 +[    1.499138] 5 fixed-partitions partitions found on MTD device spi0.0 
 +[    1.505592] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions 
 +[    1.512959] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions 
 +[    1.520571] Creating 5 MTD partitions on "spi0.0": 
 +[    1.525578] 0x000000000000-0x000000030000 : "u-boot" 
 +[    1.532834] 0x000000030000-0x000000040000 : "config" 
 +[    1.538965] 0x000000040000-0x000000050000 : "factory" 
 +[    1.545539] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions 
 +[    1.553343] 0x000000050000-0x000000f80000 : "firmware" 
 +[    1.559776] 2 fit-fw partitions found on MTD device firmware 
 +[    1.565521] Creating 2 MTD partitions on "firmware": 
 +[    1.570479] 0x000000000000-0x000000350000 : "kernel" 
 +[    1.577163] 0x000000350000-0x000000f30000 : "rootfs" 
 +[    1.583401] mtd: setting mtd5 (rootfs) as root device 
 +[    1.588552] 1 squashfs-split partitions found on MTD device rootfs 
 +[    1.594752] 0x000000780000-0x000000f30000 : "rootfs_data" 
 +[    1.601567] 0x000000f80000-0x000001000000 : "vendor" 
 +[    1.744147] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module 
 +[    1.760464] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 19 
 +[    1.772107] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 19 
 +[    1.782383] i2c_dev: i2c /dev entries driver 
 +[    1.791226] NET: Registered PF_INET6 protocol family 
 +[    1.799435] Segment Routing with IPv6 
 +[    1.803248] In-situ OAM (IOAM) with IPv6 
 +[    1.807281] NET: Registered PF_PACKET protocol family 
 +[    1.812407] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 
 +[    1.826070] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.862992] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module 
 +[    1.897375] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode 
 +[    1.905934] mt7530-mdio mdio-bus:1f lan (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=22) 
 +[    1.917925] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[    1.919904] mtk_soc_eth 1e100000.ethernet eth0: entered promiscuous mode 
 +[    1.932348] DSA: tree 0 setup 
 +[    1.936303] clk: Disabling unused clocks 
 +[    1.946210] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
 +[    1.957639] Freeing unused kernel image (initmem) memory: 1276K 
 +[    1.963613] This architecture does not have kernel memory protection. 
 +[    1.970050] Run /sbin/init as init process 
 +[    1.974167]   with arguments: 
 +[    1.974180]     /sbin/init 
 +[    1.974189]   with environment: 
 +[    1.974198]     HOME=/ 
 +[    1.974205]     TERM=linux 
 +[    2.448171] init: Console is alive 
 +[    2.452059] init: - watchdog - 
 +[    3.185289] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    3.209605] gpio_button_hotplug: loading out-of-tree module taints kernel. 
 +[    3.223480] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    3.241485] init: - preinit - 
 +[    3.917585] mtk_soc_eth 1e100000.ethernet wan: renamed from eth1 
 +[    5.290801] random: crng init done 
 +[    5.671741] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode 
 +[    5.684654] mt7530-mdio mdio-bus:1f lan: configuring for phy/gmii link mode 
 +[    5.691770] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   10.142568] jffs2: notice: (590) jffs2_build_xattr_subsystem: complete building xattr subsystem, 35 of xdatum (28 unchecked, 2 orphan) and 49 of xref (2 dead, 0 orphan) found. 
 +[   10.160930] mount_root: switching to jffs2 overlay 
 +[   10.170869] overlayfs: upper fs does not support tmpfile. 
 +[   10.212963] urandom-seed: Seeding with /etc/urandom.seed 
 +[   10.321565] procd: - early - 
 +[   10.324681] procd: - watchdog - 
 +[   10.931227] procd: - watchdog - 
 +[   10.935370] procd: - ubus - 
 +[   11.095285] procd: - init - 
 +[   11.796110] kmodloader: loading kernel modules from /etc/modules.d/
 +[   11.836415] mtk-eip93 1e004000.crypto: EIP93 Crypto Engine Initialized. 
 +[   12.240707] jitterentropy: Initialization failed with host not compliant with requirements:
 +[   12.350344] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b 
 +[   12.357879] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 
 +[   12.583337] pci 0000:00:00.0: enabling device (0000 -> 0003) 
 +[   12.589068] mt7603e 0000:01:00.0: enabling device (0000 -> 0002) 
 +[   12.595298] mt7603e 0000:01:00.0: ASIC revision: 76030010 
 +[   12.605394] mt7603e 0000:01:00.0: Firmware Version: ap_pcie 
 +[   12.611066] mt7603e 0000:01:00.0: Build Time: 20160107100755 
 +[   12.650926] mt7603e 0000:01:00.0: firmware init done 
 +[   12.822236] mt7603e 0000:01:00.0: registering led 'mt76-phy0' 
 +[   12.882252] urngd: v1.0.2 started. 
 +[   12.892114] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
 +[   12.906289] pci 0000:00:01.0: enabling device (0000 -> 0003) 
 +[   12.912163] mt7615e 0000:02:00.0: enabling device (0000 -> 0002) 
 +[   12.933546] mt7615e 0000:02:00.0: registering led 'mt76-phy1' 
 +[   13.002735] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' 
 +[   13.002803] ieee80211 phy1: copying sband (band 1) due to VHT EXT NSS BW flag 
 +[   13.559362] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   14.389706] mt7615e 0000:02:00.0: mediatek/mt7663pr2h.bin not found, switching to mediatek/mt7663pr2h_rebb.bin 
 +[   14.567425] mt7615e 0000:02:00.0: HW/SW Version: 0x65322d31, Build Time: 2009041715da1a1 
 +[   14.567425]  
 +[   14.732647] mt7615e 0000:02:00.0: N9 Firmware Version: 7663mp1827, Build Time: 20200904171623 
 +[   14.741326] mt7615e 0000:02:00.0: Region number: 0x3 
 +[   14.746337] mt7615e 0000:02:00.0: Parsing tailer Region: 0 
 +[   14.754836] mt7615e 0000:02:00.0: Region 0, override_addr = 0x00112c00 
 +[   14.761584] mt7615e 0000:02:00.0: Parsing tailer Region: 1 
 +[   14.768228] mt7615e 0000:02:00.0: Parsing tailer Region: 2 
 +[   14.774271] mt7615e 0000:02:00.0: override_addr = 0x00112c00, option = 3 
 +[   19.834276] mtk_soc_eth 1e100000.ethernet eth0: Link is Down 
 +[   19.862907] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode 
 +[   19.871325] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   19.877375] mt7530-mdio mdio-bus:1f lan: configuring for phy/gmii link mode</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/12/14 21:55
  • by weehuddy