Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revisionBoth sides next revision
inbox:toh:wavlink:ws-wn572hp3_a-v1.4 [2024/12/13 13:53] – [Table] weehuddyinbox:toh:wavlink:ws-wn572hp3_a-v1.4 [2024/12/14 21:45] – [OpenWrt bootlog] weehuddy
Line 111: Line 111:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-^ Architecture    | MIPS                               +^ Architecture    | MIPS                                                         
-^ Vendor          | Wavlink                            +^ Vendor          | Wavlink                                                      
-^ Bootloader      | U-Boot                             +^ Bootloader      | U-Boot                                                       
-^ System-On-Chip  | MediaTek MT7621AT                  +^ System-On-Chip  | MediaTek MT7621AT                                            
-^ CPU/Speed       | 880 MHz                            +^ CPU/Speed       | 880 MHz                                                      
-^ Flash-Chip      | GigaDevice 25Q128ESIG3             +^ Flash-Chip      | Fudan FM25Q128                                               
-^ Flash size      | 16 MiB                             +^ Flash size      | 16 MiB                                                       
-^ RAM             | 128 Mib                            +^ RAM             | 128 Mib                                                      
-^ Wireless        | EXAMPLE RT2860v2 2.4GHz 802.11bgn  | +^ Wireless        | MediaTek MT7603E 802.11b/g/n & MediaTek MT7613BE 802.11ac/ | 
-^ Ethernet        | 1 x Gb LAN, 1 X Gb WAN             +^ Ethernet        | 1 x Gb LAN, 1 X Gb WAN                                       
-^ Switch          | EXAMPLE Qualcomm Atheros QCA8337   +^ Switch          | MT7530                                                       
-^ USB             EXAMPLE 1x 2.0                     +^ USB             NO                                                           
-^ Serial          | YES                                +^ Serial          | Yes                                                          
-^ JTAG            | EXAMPLE [[#JTAG|Not populated]]    |+^ JTAG            | EXAMPLE [[#JTAG|Not populated]]                              |
  
  
Line 1851: Line 1851:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>[    0.000000] Linux version 6.6.65 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28330-15e173bf7e) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Dec 13 20:40:02 2024 
 +[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 
 +[    0.000000] printk: bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.000000] MIPS: machine is Wavlink WS-WN572HP3 4G 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] VPE topology {2,2} total 4 
 +[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] 
 +[    0.000000] percpu: Embedded 12 pages/cpu s19136 r8192 d21824 u49152 
 +[    0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 +[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) 
 +[    0.000000] Writing ErrCtl register=0000ac00 
 +[    0.000000] Readback ErrCtl register=0000ac00 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 117208K/131072K available (8376K kernel code, 657K rwdata, 1776K rodata, 1276K init, 229K bss, 13864K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] NR_IRQS: 256 
 +[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. 
 +[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns 
 +[    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns 
 +[    0.008064] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) 
 +[    0.066213] pid_max: default: 32768 minimum: 301 
 +[    0.079586] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.086829] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.103362] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. 
 +[    0.113179] rcu: Hierarchical SRCU implementation. 
 +[    0.117886] rcu: Max phase no-delay instances is 1000. 
 +[    0.123958] smp: Bringing up secondary CPUs ... 
 +[    0.129320] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.129350] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.129364] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.129412] CPU1 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.183360] Synchronize counters for CPU 1: done. 
 +[    0.215431] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.215456] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.215470] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.215504] CPU2 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.274687] Synchronize counters for CPU 2: done. 
 +[    0.305417] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.305443] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.305457] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.305494] CPU3 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.359902] Synchronize counters for CPU 3: done. 
 +[    0.389777] smp: Brought up 1 node, 4 CPUs 
 +[    0.400791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.410606] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) 
 +[    0.421433] pinctrl core: initialized pinctrl subsystem 
 +[    0.429964] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
 +[    0.436657] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.442638] FPU Affinity set after 11720 emulations 
 +[    0.460781] clocksource: Switched to clocksource GIC 
 +[    0.475790] NET: Registered PF_INET protocol family 
 +[    0.480908] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.489633] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +[    0.497970] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.505687] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.513332] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) 
 +[    0.520432] TCP: Hash tables configured (established 1024 bind 1024) 
 +[    0.527764] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.535298] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.541817] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.549704] NET: Registered PF_UNIX/PF_LOCAL protocol family 
 +[    0.555389] PCI: CLS 0 bytes, default 32 
 +[    0.563208] workingset: timestamp_bits=14 max_order=15 bucket_order=1 
 +[    0.570893] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.576645] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.592505] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) 
 +[    0.603878] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.609862] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.615898] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.622112] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: 
 +[    0.628756] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff] 
 +[    0.637537] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000 
 +[    0.645644] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000 
 +[    1.010781] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) 
 +[    1.017685] mt7621-pci 1e140000.pcie: PCIE0 enabled 
 +[    1.022569] mt7621-pci 1e140000.pcie: PCIE1 enabled 
 +[    1.027523] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 
 +[    1.034677] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 
 +[    1.041013] pci_bus 0000:00: root bus resource [bus 00-ff] 
 +[    1.046421] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] 
 +[    1.053272] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] 
 +[    1.059433] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 
 +[    1.065389] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] 
 +[    1.071623] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] 
 +[    1.077862] pci 0000:00:00.0: supports D1 
 +[    1.081808] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
 +[    1.088297] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 
 +[    1.094354] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] 
 +[    1.100546] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] 
 +[    1.106871] pci 0000:00:01.0: supports D1 
 +[    1.110828] pci 0000:00:01.0: PME# supported from D0 D1 D3hot 
 +[    1.118555] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.126553] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.134775] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 
 +[    1.140823] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] 
 +[    1.147155] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold 
 +[    1.153575] pci 0000:00:00.0: PCI bridge to [bus 01-ff] 
 +[    1.158741] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.164848] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
 +[    1.171572] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref] 
 +[    1.178712] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 
 +[    1.185569] pci 0000:02:00.0: [14c3:7663] type 00 class 0x000280 
 +[    1.191596] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] 
 +[    1.198746] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] 
 +[    1.205949] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] 
 +[    1.213227] pci 0000:02:00.0: supports D1 D2 
 +[    1.217406] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
 +[    1.224039] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) 
 +[    1.239151] pci 0000:00:01.0: PCI bridge to [bus 02-ff] 
 +[    1.244367] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.250379] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff] 
 +[    1.257162] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref] 
 +[    1.264322] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 
 +[    1.270933] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] 
 +[    1.277448] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] 
 +[    1.284390] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] 
 +[    1.290959] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] 
 +[    1.297846] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] 
 +[    1.304607] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] 
 +[    1.311791] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] 
 +[    1.318490] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x604fffff pref] 
 +[    1.325692] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff] 
 +[    1.332437] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff] 
 +[    1.339141] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff] 
 +[    1.345219] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff] 
 +[    1.351275] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] 
 +[    1.357979] pci 0000:00:00.0: PCI bridge to [bus 01] 
 +[    1.362930] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.368948] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff] 
 +[    1.375726] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref] 
 +[    1.382895] pci 0000:02:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit pref] 
 +[    1.390559] pci 0000:02:00.0: BAR 2: assigned [mem 0x60400000-0x60403fff 64bit pref] 
 +[    1.398282] pci 0000:02:00.0: BAR 4: assigned [mem 0x60404000-0x60404fff 64bit pref] 
 +[    1.405968] pci 0000:00:01.0: PCI bridge to [bus 02] 
 +[    1.410887] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff] 
 +[    1.416899] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff] 
 +[    1.423666] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x604fffff pref] 
 +[    1.432560] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 
 +[    1.448979] printk: console [ttyS0] disabled 
 +[    1.454249] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A 
 +[    1.463408] printk: console [ttyS0] enabled 
 +[    1.471771] printk: bootconsole [early0] disabled 
 +[    1.486511] spi-mt7621 1e000b00.spi: sys_freq: 220000000 
 +[    1.493447] spi-nor spi0.0: spi-nor-generic (16384 Kbytes) 
 +[    1.499138] 5 fixed-partitions partitions found on MTD device spi0.0 
 +[    1.505592] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions 
 +[    1.512959] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions 
 +[    1.520571] Creating 5 MTD partitions on "spi0.0": 
 +[    1.525578] 0x000000000000-0x000000030000 : "u-boot" 
 +[    1.532834] 0x000000030000-0x000000040000 : "config" 
 +[    1.538965] 0x000000040000-0x000000050000 : "factory" 
 +[    1.545539] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions 
 +[    1.553343] 0x000000050000-0x000000f80000 : "firmware" 
 +[    1.559776] 2 fit-fw partitions found on MTD device firmware 
 +[    1.565521] Creating 2 MTD partitions on "firmware": 
 +[    1.570479] 0x000000000000-0x000000350000 : "kernel" 
 +[    1.577163] 0x000000350000-0x000000f30000 : "rootfs" 
 +[    1.583401] mtd: setting mtd5 (rootfs) as root device 
 +[    1.588552] 1 squashfs-split partitions found on MTD device rootfs 
 +[    1.594752] 0x000000780000-0x000000f30000 : "rootfs_data" 
 +[    1.601567] 0x000000f80000-0x000001000000 : "vendor" 
 +[    1.744147] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module 
 +[    1.760464] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 19 
 +[    1.772107] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 19 
 +[    1.782383] i2c_dev: i2c /dev entries driver 
 +[    1.791226] NET: Registered PF_INET6 protocol family 
 +[    1.799435] Segment Routing with IPv6 
 +[    1.803248] In-situ OAM (IOAM) with IPv6 
 +[    1.807281] NET: Registered PF_PACKET protocol family 
 +[    1.812407] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 
 +[    1.826070] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.862992] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module 
 +[    1.897375] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode 
 +[    1.905934] mt7530-mdio mdio-bus:1f lan (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=22) 
 +[    1.917925] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[    1.919904] mtk_soc_eth 1e100000.ethernet eth0: entered promiscuous mode 
 +[    1.932348] DSA: tree 0 setup 
 +[    1.936303] clk: Disabling unused clocks 
 +[    1.946210] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
 +[    1.957639] Freeing unused kernel image (initmem) memory: 1276K 
 +[    1.963613] This architecture does not have kernel memory protection. 
 +[    1.970050] Run /sbin/init as init process 
 +[    1.974167]   with arguments: 
 +[    1.974180]     /sbin/init 
 +[    1.974189]   with environment: 
 +[    1.974198]     HOME=/ 
 +[    1.974205]     TERM=linux 
 +[    2.448171] init: Console is alive 
 +[    2.452059] init: - watchdog - 
 +[    3.185289] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    3.209605] gpio_button_hotplug: loading out-of-tree module taints kernel. 
 +[    3.223480] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    3.241485] init: - preinit - 
 +[    3.917585] mtk_soc_eth 1e100000.ethernet wan: renamed from eth1 
 +[    5.290801] random: crng init done 
 +[    5.671741] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode 
 +[    5.684654] mt7530-mdio mdio-bus:1f lan: configuring for phy/gmii link mode 
 +[    5.691770] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   10.142568] jffs2: notice: (590) jffs2_build_xattr_subsystem: complete building xattr subsystem, 35 of xdatum (28 unchecked, 2 orphan) and 49 of xref (2 dead, 0 orphan) found. 
 +[   10.160930] mount_root: switching to jffs2 overlay 
 +[   10.170869] overlayfs: upper fs does not support tmpfile. 
 +[   10.212963] urandom-seed: Seeding with /etc/urandom.seed 
 +[   10.321565] procd: - early - 
 +[   10.324681] procd: - watchdog - 
 +[   10.931227] procd: - watchdog - 
 +[   10.935370] procd: - ubus - 
 +[   11.095285] procd: - init - 
 +[   11.796110] kmodloader: loading kernel modules from /etc/modules.d/
 +[   11.836415] mtk-eip93 1e004000.crypto: EIP93 Crypto Engine Initialized. 
 +[   12.240707] jitterentropy: Initialization failed with host not compliant with requirements:
 +[   12.350344] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b 
 +[   12.357879] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 
 +[   12.583337] pci 0000:00:00.0: enabling device (0000 -> 0003) 
 +[   12.589068] mt7603e 0000:01:00.0: enabling device (0000 -> 0002) 
 +[   12.595298] mt7603e 0000:01:00.0: ASIC revision: 76030010 
 +[   12.605394] mt7603e 0000:01:00.0: Firmware Version: ap_pcie 
 +[   12.611066] mt7603e 0000:01:00.0: Build Time: 20160107100755 
 +[   12.650926] mt7603e 0000:01:00.0: firmware init done 
 +[   12.822236] mt7603e 0000:01:00.0: registering led 'mt76-phy0' 
 +[   12.882252] urngd: v1.0.2 started. 
 +[   12.892114] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
 +[   12.906289] pci 0000:00:01.0: enabling device (0000 -> 0003) 
 +[   12.912163] mt7615e 0000:02:00.0: enabling device (0000 -> 0002) 
 +[   12.933546] mt7615e 0000:02:00.0: registering led 'mt76-phy1' 
 +[   13.002735] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' 
 +[   13.002803] ieee80211 phy1: copying sband (band 1) due to VHT EXT NSS BW flag 
 +[   13.559362] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   14.389706] mt7615e 0000:02:00.0: mediatek/mt7663pr2h.bin not found, switching to mediatek/mt7663pr2h_rebb.bin 
 +[   14.567425] mt7615e 0000:02:00.0: HW/SW Version: 0x65322d31, Build Time: 2009041715da1a1 
 +[   14.567425]  
 +[   14.732647] mt7615e 0000:02:00.0: N9 Firmware Version: 7663mp1827, Build Time: 20200904171623 
 +[   14.741326] mt7615e 0000:02:00.0: Region number: 0x3 
 +[   14.746337] mt7615e 0000:02:00.0: Parsing tailer Region: 0 
 +[   14.754836] mt7615e 0000:02:00.0: Region 0, override_addr = 0x00112c00 
 +[   14.761584] mt7615e 0000:02:00.0: Parsing tailer Region: 1 
 +[   14.768228] mt7615e 0000:02:00.0: Parsing tailer Region: 2 
 +[   14.774271] mt7615e 0000:02:00.0: override_addr = 0x00112c00, option = 3 
 +[   19.834276] mtk_soc_eth 1e100000.ethernet eth0: Link is Down 
 +[   19.862907] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode 
 +[   19.871325] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   19.877375] mt7530-mdio mdio-bus:1f lan: configuring for phy/gmii link mode</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/12/14 21:55
  • by weehuddy