WAVLINK WL-WN533A8 (QUANTUM T8)
Tri-band wireless router with 8 antennas, 4 LAN ports, and 1 WAN port (gigabit). A USB 3.0 port is included for media sharing.
OpenWrt support
Not supported.
Hardware highlights
| CPU | Ram | Flash | Network | WLAN | USB | Serial | JTag |
|---|---|---|---|---|---|---|---|
| MediaTek MT7621 @ 880 MHz | 128 MiB | 16 MiB | 4x 10/100/1000 | Tri-Band a/b/g/n/ac | 1x 3.0 | Yes | ? |
Hardware
Info
| Architecture | MIPS |
|---|---|
| Vendor | Wavlink |
| Bootloader | U-Boot |
| System-On-Chip | MediaTek MT7621DAT |
| CPU/Speed | 880 MHz |
| Flash-Chip | GigaDevice 25Q127CS1G3 |
| Flash size | 16 MiB |
| RAM | 128 MiB |
| WLAN PCIe Card 1 | MediaTek MT7615DN Dual Band 2.4GHz & 5GHz 802.11 a/b/g/n/ac |
| WLAN PCIe Card 2 | MediaTek MT7615N 5GHz 802.11 n/ac |
| Ethernet | 10/100/1000 Mbit/s |
| Switch | MediaTek MT7530 |
| USB | 1x 3.0 |
| Serial | Yes |
| JTAG | Not populated |
Photos
Insert photo of front of the casing
Insert photo of back of the casing
Insert photo of backside label
Insert photo of PCB
Opening the case
Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port
Replace EXAMPLE by real values.
| Serial connection parameters for WAVLINK WL-WN533A8 (QUANTUM T8) | 57600, 8N1 |
|---|
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
Bootlogs
OEM bootlog
COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE
OpenWrt bootlog
COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING