Ubiquiti Edgerouter Infinity (ER-8-XG)
The Ubiquiti EdgeRouter Infinity is a 8+1-port router based on the Cavium Octeon III platform. It has 8 SFP+ and a single Gigabit Ethernet Port.
OpenWrt support
Not supported.
Supporting activities
- Working Kernel (without Ethernet): https://github.com/nicolasberens/openwrt-e1000
Hardware highlights
| CPU | Ram | Flash | Network | WLAN | USB | Serial | JTag |
|---|---|---|---|---|---|---|---|
| Octeon III 7360 16 Core | 16GB | 4GB | 8x 1000/10000, 1×1000 | - | 1x 3.0 | Yes | ? |
Loading OpenWRT
Apply the folowing steps to flash the firmware:
- Copy the files 'openwrt-octeon-generic-ubnt_edgerouter-8-xg-initramfs-kernel.bin' and 'openwrt-octeon-generic-ubnt_edgerouter-8-xg-squashfs-sysupgrade.tar' to a USB flash drive. Ensure that the USB flash drive is formatted to VFAT/FAT32
- make sure that the EdgeRouter is powered off
- connect USB flash drive to EdgeRouter front USB port
- connect serial cable using front console RJ45 port
Baud rate: 115200 Data bits: 8 Parity: NONE Stop bits: 1 Flow control: NONE
- connect power to cable to EdgeRouter
- connect terminal to the console to see uboot boot process (example Linux terminal)
pc_user / # picocom -b 115200 /dev/ttyUSB0 (replace ttyUSB0 for the serial device that will be used for this)
- power on the EdgeRouter
- interrupt boot by pressing (random) button(s) on your keyboard to log in to the uboot
- detect usb connected flash drives by typing to the console: usb start
- after drive is detected load initramfs+kernel to the memory by typing: fatload usb 0:0 0x20000000 openwrt-octeon-generic-ubnt_edgerouter-8-xg-initramfs-kernel.bin
- after initramfs+kernel is loaded to the memory load it by typing: bootoctlinux 0 numcores=16 endbootargs mem=0
Buttons
The Ubiquiti Edgerouter Infinity has the following buttons:
| BUTTON | Event |
|---|---|
| Reset | reset |
Hardware
Info
| Architecture | MIPS64 |
|---|---|
| Vendor | Ubiquiti |
| Bootloader | U-Boot |
| System-On-Chip | Cavium Octeon III |
| CPU/Speed | 1500 MHz |
| Flash-Chip | unkown |
| Flash size | 4 GiB |
| RAM | 16 GiB |
| Ethernet | 8x SFP+ , 1x Gigabit Ethernet |
| Switch | |
| USB | 1x 3.0 |
| Serial | Yes |
| JTAG |
Photos
Opening the case
The case uses standard PH1 Screws
Serial
→ port.serial general information about the serial port, serial port cable, etc.
Console port on front of device uses RJ45, RS232, Cisco-style cable.
| Serial connection parameters for Ubiquiti Edgerouter Infinity | EXAMPLE 115200, 8N1, 3.3V |
|---|
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
Bootlogs
OEM bootlog
Looking for valid bootloader image.... Jumping to start of image at address 0xbfe00000
U-Boot 2013.07 (UBNT Build Version: e1000_003_c6018) (May 27 2019 - 06:43:21)
Octeon unique ID: 034000214219f31e0282 N0.LMC0 Configuration Completed: 8192 MB N0.LMC1 Configuration Completed: 8192 MB UBNT_E1000 r1:0, r2:21, serial #: 788A2046CD0D MPR 13-02234-21 Core clock: 1800 MHz, IO clock: 1000 MHz, DDR clock: 1067 MHz (2134 Mhz DDR) Base DRAM address used by u-boot: 0x40f000000, size: 0x1000000 DRAM: 16 GiB Clearing DRAM...... done Flash: 8 MiB QLM 2: XFI QLM 3: XFI QLM 6: SGMII MMC: Octeon MMC/SD0: 0 Net: octeth0, octeth1, octeth2, octeth3, octeth4, octeth5, octeth6, octeth7, octeth8 [PRIME] Type the command 'usb start' to scan for USB storage devices.
Hit any key to stop autoboot: 0 reading vmlinux.64 6899672 bytes read in 2487 ms (2.6 MiB/s) reading vmlinux.64.md5 33 bytes read in 305 ms (0 Bytes/s) Allocating memory for ELF segment: addr: 0xffffffff80800000 (adjusted to: 0x800000), size 0x7c8740 ## Loading big-endian Linux kernel with entry point: 0xffffffff80cbf9d0 ... Bootloader: Done loading app on coremask: 0xffff Starting cores: 0xffff Linux version 4.9.79-UBNT (ubnt@f6a34bf0a886) (gcc version 4.7.0 (Cavium Inc. Version: SDK_BUILD build 54) ) #1 SMP Thu Jun 15 11:34:59 UTC 2023 CVMSEG size: 3 cache lines (384 bytes) Cavium Inc. SDK-5.1.0 bootconsole [early0] enabled CPU0 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Determined physical RAM map: memory: 000000000feff000 @ 00000000f0001000 (usable) memory: 000000006fd00000 @ 0000000080300000 (usable) memory: 000000030efff000 @ 0000000100001000 (usable) memory: 000000005fc00000 @ 0000000020300000 (usable) memory: 000000000ec00000 @ 0000000001300000 (usable) memory: 0000000000400000 @ 0000000000400000 (usable) memory: 0000000000652000 @ 0000000000800000 (kernel data and code) memory: 0000000000129000 @ 0000000000ea0000 (kernel data and code) memory: 000000000004e000 @ 0000000000e52000 (usable after init) Wasting 57344 bytes for tracking 1024 unused pages Using passed Device Tree <800000000fff22e0>. Using passed Device Tree. UBNT board DTS pruning ... board 20010 major 1 software IO TLB [mem 0x0f39a000-0x0f3da000] (0MB) mapped at [800000000f39a000-800000000f3d9fff] Primary instruction cache 78kB, virtually tagged, 39 way, 16 sets, linesize 128 bytes. Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes. Secondary unified cache 4096kB, 16-way, 2048 sets, linesize 128 bytes. Secondary unified cache 4096kB, 16-way, 2048 sets, linesize 128 bytes. Zone ranges:
DMA32 [mem 0x0000000000400000-0x00000000efffffff] Normal [mem 0x00000000f0000000-0x000000040effffff]
Movable zone start for each node Early memory node ranges
node 0: [mem 0x0000000000400000-0x0000000000fc8fff] node 0: [mem 0x0000000001300000-0x000000000fefffff] node 0: [mem 0x0000000020300000-0x000000007fefffff] node 0: [mem 0x0000000080300000-0x00000000efffffff] node 0: [mem 0x00000000f0001000-0x00000000ffefffff] node 0: [mem 0x0000000100001000-0x000000040effffff]
Initmem setup node 0 [mem 0x0000000000400000-0x000000040effffff] percpu: Embedded 17 pages/cpu @800000000f3e7000 s29056 r8192 d32384 u69632 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128820 Kernel command line: root=/dev/mmcblk0p2 rootdelay=10 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=phys_mapped_flash:2048k(boot0),2048k(boot1),64k(eeprom) console=ttyS0,115200 rootwait rootflags=data=journal log_buf_len individual max cpu contribution: 4096 bytes log_buf_len total cpu_extra contributions: 61440 bytes log_buf_len min size: 65536 bytes log_buf_len: 131072 bytes early log buf free: 61512(93%) PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Memory: 16476568K/16744220K available (4891K kernel code, 467K rwdata, 1088K rodata, 312K init, 1185K bss, 267652K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
NR_IRQS:511 clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns Calibrating delay loop (skipped) preset value.. 3600.00 BogoMIPS (lpj=18000000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) Checking for the daddi bug... no. SMP: Booting CPU01 (CoreId 1)... CPU1 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU02 (CoreId 2)... CPU2 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU03 (CoreId 3)... CPU3 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU04 (CoreId 4)... CPU4 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU05 (CoreId 5)... CPU5 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU06 (CoreId 6)... CPU6 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU07 (CoreId 7)... CPU7 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU08 (CoreId 8)... CPU8 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU09 (CoreId 9)... CPU9 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU10 (CoreId 10)... CPU10 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU11 (CoreId 11)... CPU11 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU12 (CoreId 12)... CPU12 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU13 (CoreId 13)... CPU13 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU14 (CoreId 14)... CPU14 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 SMP: Booting CPU15 (CoreId 15)... CPU15 revision is: 000d9702 (Cavium Octeon III) FPU revision is: 00739700 Brought up 16 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 4096 (order: 7, 524288 bytes) NET: Registered protocol family 16 HugeTLB registered 2 MB page size, pre-allocated 0 pages SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource OCTEON_CVMCOUNT NET: Registered protocol family 2 TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 octeon_pci_console: Console not created. /proc/octeon_perf: Octeon performance counter interface loaded platform 1180068000000.uctl: clocks initialized. platform 1180069000000.uctl: clocks initialized. workingset: timestamp_bits=62 max_order=22 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher random: fast init done io scheduler noop registered io scheduler cfq registered (default) octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO: base = 480 Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled console [ttyS0] disabled 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 64, base_baud = 62500000) is a OCTEON console [ttyS0] enabled console [ttyS0] enabled bootconsole [early0] disabled bootconsole [early0] disabled 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 128, base_baud = 62500000) is a OCTEON loop: module loaded m25p80 spi32766.0: mx25l1606e (2048 Kbytes) spi-octeon 1070000001000.spi: OCTEON SPI bus driver libphy: mdio_octeon: probed mdio_octeon 1180000003800.mdio: Probed libphy: mdio_octeon: probed mdio_octeon 1180000003880.mdio: Probed libphy: Fixed MDIO Bus: probed octeon_bgx_port 11800e0000000.0.ethernet-mac: Probed octeon_bgx_nexus 11800e0000000.ethernet-mac-nexus: Created PKI 0: 800000040cb1da00 octeon_bgx_port 11800e0000000.1.ethernet-mac: Probed octeon_bgx_nexus 11800e0000000.ethernet-mac-nexus: Created PKI 1: 800000040cb1de00 octeon_bgx_port 11800e0000000.2.ethernet-mac: Probed octeon_bgx_nexus 11800e0000000.ethernet-mac-nexus: Created PKI 2: 800000040cb1e200 octeon_bgx_port 11800e0000000.3.ethernet-mac: Probed octeon_bgx_nexus 11800e0000000.ethernet-mac-nexus: Created PKI 3: 800000040cb1e600 octeon_bgx_nexus 11800e0000000.ethernet-mac-nexus: Probed octeon_bgx_port 11800e1000000.0.ethernet-mac: Probed octeon_bgx_nexus 11800e1000000.ethernet-mac-nexus: Created PKI 4: 800000040cb1ea00 octeon_bgx_port 11800e1000000.1.ethernet-mac: Probed octeon_bgx_nexus 11800e1000000.ethernet-mac-nexus: Created PKI 5: 800000040cb1ee00 octeon_bgx_port 11800e1000000.2.ethernet-mac: Probed octeon_bgx_nexus 11800e1000000.ethernet-mac-nexus: Created PKI 6: 800000040cb1f200 octeon_bgx_port 11800e1000000.3.ethernet-mac: Probed octeon_bgx_nexus 11800e1000000.ethernet-mac-nexus: Created PKI 7: 800000040cb1f600 octeon_bgx_nexus 11800e1000000.ethernet-mac-nexus: Probed octeon_bgx_port 11800e2000000.2.ethernet-mac: Probed octeon_bgx_nexus 11800e2000000.ethernet-mac-nexus: Created PKI 8: 800000040cb1fa00 octeon_bgx_nexus 11800e2000000.ethernet-mac-nexus: Probed octeon3_eth_global_init SSO:31:511, PKO:30:510 ethernet-mac-pki ethernet-mac-pki.0: Probing 0-0:0 ethernet-mac-pki ethernet-mac-pki.0: rx sso grp:1..1 aura:509 pknd:0 pko_queue:1 ethernet-mac-pki ethernet-mac-pki.0 eth1: Registered ethernet-mac-pki ethernet-mac-pki.1: Probing 0-0:1 ethernet-mac-pki ethernet-mac-pki.1: rx sso grp:2..2 aura:508 pknd:1 pko_queue:2 ethernet-mac-pki ethernet-mac-pki.1 eth2: Registered ethernet-mac-pki ethernet-mac-pki.2: Probing 0-0:2 ethernet-mac-pki ethernet-mac-pki.2: rx sso grp:3..3 aura:507 pknd:2 pko_queue:3 ethernet-mac-pki ethernet-mac-pki.2 eth3: Registered ethernet-mac-pki ethernet-mac-pki.3: Probing 0-0:3 ethernet-mac-pki ethernet-mac-pki.3: rx sso grp:4..4 aura:506 pknd:3 pko_queue:4 ethernet-mac-pki ethernet-mac-pki.3 eth4: Registered ethernet-mac-pki ethernet-mac-pki.4: Probing 0-1:0 ethernet-mac-pki ethernet-mac-pki.4: rx sso grp:5..5 aura:505 pknd:4 pko_queue:5 ethernet-mac-pki ethernet-mac-pki.4 eth5: Registered ethernet-mac-pki ethernet-mac-pki.5: Probing 0-1:1 ethernet-mac-pki ethernet-mac-pki.5: rx sso grp:6..6 aura:504 pknd:5 pko_queue:6 ethernet-mac-pki ethernet-mac-pki.5 eth6: Registered ethernet-mac-pki ethernet-mac-pki.6: Probing 0-1:2 ethernet-mac-pki ethernet-mac-pki.6: rx sso grp:7..7 aura:503 pknd:6 pko_queue:7 ethernet-mac-pki ethernet-mac-pki.6 eth7: Registered ethernet-mac-pki ethernet-mac-pki.7: Probing 0-1:3 ethernet-mac-pki ethernet-mac-pki.7: rx sso grp:8..8 aura:502 pknd:7 pko_queue:8 ethernet-mac-pki ethernet-mac-pki.7 eth8: Registered ethernet-mac-pki ethernet-mac-pki.8: Probing 0-2:2 ethernet-mac-pki ethernet-mac-pki.8: rx sso grp:9..9 aura:501 pknd:10 pko_queue:9 ethernet-mac-pki ethernet-mac-pki.8 eth0: Registered dwc3 1680000000000.xhci: Configuration mismatch. dr_mode forced to host dwc3 1690000000000.xhci: Configuration mismatch. dr_mode forced to host ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-platform: OHCI generic platform driver xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x02010010 xhci-hcd xhci-hcd.0.auto: irq 449, io mem 0x1680000000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 4.9.79-UBNT xhci-hcd usb usb1: SerialNumber: xhci-hcd.0.auto hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.9.79-UBNT xhci-hcd usb usb2: SerialNumber: xhci-hcd.0.auto hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci-hcd xhci-hcd.1.auto: xHCI Host Controller xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x02010010 xhci-hcd xhci-hcd.1.auto: irq 457, io mem 0x1690000000000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 4.9.79-UBNT xhci-hcd usb usb3: SerialNumber: xhci-hcd.1.auto hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected xhci-hcd xhci-hcd.1.auto: xHCI Host Controller xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 4.9.79-UBNT xhci-hcd usb usb4: SerialNumber: xhci-hcd.1.auto hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage i2c-octeon 1180000001000.i2c: probed i2c-octeon 1180000001200.i2c: probed octeon_wdt: Initial granularity 4 Sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright© Pierre Ossman usb 3-1: new high-speed USB device number 2 using xhci-hcd usb 3-1: New USB device found, idVendor=05e3, idProduct=0608 usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: USB2.0 Hub hub 3-1:1.0: USB hub found hub 3-1:1.0: 4 ports detected NET: Registered protocol family 17 NET: Registered protocol family 15 L2 lock: TLB refill 256 bytes L2 lock: General exception 128 bytes L2 lock: low-level interrupt 128 bytes L2 lock: interrupt 640 bytes L2 lock: memcpy 1152 bytes Bootbus flash: Setting flash for 8MB flash at 0x1f400000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00007e Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
phys_mapped_flash: Swapping erase regions for top-boot CFI table. number of CFI chips: 1 3 cmdlinepart partitions found on MTD device phys_mapped_flash Creating 3 MTD partitions on “phys_mapped_flash”: 0x000000000000-0x000000200000 : “boot0” 0x000000200000-0x000000400000 : “boot1” 0x000000400000-0x000000410000 : “eeprom” OF: fdt:not creating '/sys/firmware/fdt': CRC check failed Waiting 10 sec before mounting root device... random: crng init done Waiting for root device /dev/mmcblk0p2... mmc0: new DDR MMC card at address 0001 mmcblk0: mmc0:0001 SEM04G 3.69 GiB mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB mmcblk0rpmb: mmc0:0001 SEM04G partition 3 2.00 MiB mmcblk0: p1 p2 EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support! EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem EXT4-fs (mmcblk0p2): mounted filesystem with journalled data mode. Opts: data=journal VFS: Mounted root (overlay filesystem) on device 0:13. devtmpfs: mounted Freeing unused kernel memory: 312K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. NET: Registered protocol family 10 ip_tables: (C) 2000-2006 Netfilter Core Team systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) systemd[1]: Detected architecture mips64.
Welcome to Debian GNU/Linux 9 (stretch)!
systemd[1]: Set hostname to <EdgeRouter-Infinity>. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ OK ] Listening on Journal Socket. [ OK ] Reached target Swap. [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Paths. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Created slice System Slice.
Mounting POSIX Message Queue File System...
Starting Journal Service...
Starting Remount Root and Kernel File Systems...
Starting Load Kernel Modules...
[ OK ] Reached target Slices. ubnt_platform: loading out-of-tree module taints kernel. ubnt_platform: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint
Starting Create list of required st…ce nodes for the current kernel...
[ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel.
Starting Create Static Device Nodes in /dev...
Starting Apply Kernel Variables...
Starting Load/Save Random Seed...
Starting udev Coldplug all Devices...
[ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
Mounting /tmp...
Mounting /run/shm...
Mounting /var/log...
Mounting /lib/init/rw...
[ OK ] Mounted /lib/init/rw. [ OK ] Mounted /var/log. [ OK ] Mounted /run/shm. [ OK ] Mounted /tmp. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ OK ] Found device /dev/ttyS0.
Starting Flush Journal to Persistent Storage...
[ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on UUID daemon activation socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System.
Starting System Logging Service...
[ OK ] Started Deferred execution scheduler. [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus.
Starting Login Service...
Starting Create vyatta file system....
[ OK ] Started System Logging Service. [ OK ] Started Login Service. [ OK ] Started Create vyatta file system..
Starting Load the configuration of features which need reboot...
[ OK ] Started Load the configuration of features which need reboot. [ OK ] Reached target Network (Pre).
Starting Raise network interfaces...
Starting Vyatta PPPoE...
[ OK ] Started Vyatta PPPoE.
Starting UBNT daemon...
[ OK ] Started Raise network interfaces. [ OK ] Started UBNT daemon.
Starting EdgeOS IMI manager...
[ OK ] Started EdgeOS IMI manager.
Starting EdgeOS NSM daemon...
[ OK ] Started EdgeOS NSM daemon.
Starting EdgeOS RIB daemon...
[ OK ] Started EdgeOS RIB daemon.
Starting UBNT Routing Daemons...
[ OK ] Reached target Network.
Starting Permit User Sessions...
Starting /etc/rc.local Compatibility...
[ OK ] Started Permit User Sessions. [ OK ] Started /etc/rc.local Compatibility.
Stopping System Logging Service...
[ OK ] Stopped System Logging Service.
Starting System Logging Service...
[ OK ] Started System Logging Service.
Stopping System Logging Service...
[ OK ] Stopped System Logging Service.
Starting System Logging Service...
[ OK ] Started System Logging Service.
Starting Network Time Service...
[ OK ] Started Network Time Service.
Stopping Network Time Service...
[ OK ] Stopped Network Time Service.
Starting Network Time Service...
[ OK ] Started Network Time Service.
Starting GUI Telnet Daemon...
[ OK ] Started GUI Telnet Daemon.
Starting Lighttpd Daemon...
[ OK ] Started Lighttpd Daemon. [ OK ] Started UBNT Routing Daemons.
Starting Netplug Services...
Starting Start ubnt feature daemons...
[ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Netplug Services. [ OK ] Started Start ubnt feature daemons. [ OK ] Reached target Multi-User System.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
_____ _
| || | _ _ © 2010-2020 | _| / _ |/ _ |/ _ Ubiquiti Networks, Inc. | || (_| | (_| | / |_._|. |_| https://www.ubnt.com
|___/
Welcome to EdgeOS EdgeRouter-Infinity ttyS0
By logging in, accessing, or using the Ubiquiti product, you acknowledge that you have read and understood the Ubiquiti License Agreement (available in the Web UI at, by default, http://192.168.1.1) and agree to be bound by its terms.
EdgeRouter-Infinity login:
OpenWrt bootlog
COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING
Notes
Reducing Fan Speed with the original firmware
echo 1-10 > /sys/module/ubnt_platform/global/fan_ctrl
(1-3 basically shutting the fans off)
uboot info
Looking for valid bootloader image.... Jumping to start of image at address 0xbfe00000 U-Boot 2013.07 (UBNT Build Version: e1000_003_c6018) (May 27 2019 - 06:43:21) Octeon unique ID: 034000214219f31e0282 N0.LMC0 Configuration Completed: 8192 MB N0.LMC1 Configuration Completed: 8192 MB UBNT_E1000 r1:0, r2:21, serial #: 788A2046CD0D MPR 13-02234-21 Core clock: 1800 MHz, IO clock: 1000 MHz, DDR clock: 1067 MHz (2134 Mhz DDR) Base DRAM address used by u-boot: 0x40f000000, size: 0x1000000 DRAM: 16 GiB Clearing DRAM...... done Flash: 8 MiB QLM 2: XFI QLM 3: XFI QLM 6: SGMII MMC: Octeon MMC/SD0: 0 Net: octeth0, octeth1, octeth2, octeth3, octeth4, octeth5, octeth6, octeth7, octeth8 [PRIME] Type the command 'usb start' to scan for USB storage devices. Hit any key to stop autoboot: 0 Octeon ubnt_e1000# Octeon ubnt_e1000# meminfo DRAM: 16 GiB Looking for valid bootloader image.... Jumping to start of image at address 0xbfe00000 U-Boot 2013.07 (UBNT Build Version: e1000_003_c6018) (May 27 2019 - 06:43:21) Octeon unique ID: 034000214219f31e0282 N0.LMC0 Configuration Completed: 8192 MB N0.LMC1 Configuration Completed: 8192 MB UBNT_E1000 r1:0, r2:21, serial #: 788A2046CD0D MPR 13-02234-21 Core clock: 1800 MHz, IO clock: 1000 MHz, DDR clock: 1067 MHz (2134 Mhz DDR) Base DRAM address used by u-boot: 0x40f000000, size: 0x1000000 DRAM: 16 GiB Clearing DRAM...... done Flash: 8 MiB QLM 2: XFI QLM 3: XFI QLM 6: SGMII MMC: Octeon MMC/SD0: 0 Net: octeth0, octeth1, octeth2, octeth3, octeth4, octeth5, octeth6, octeth7, octeth8 [PRIME] Type the command 'usb start' to scan for USB storage devices. Hit any key to stop autoboot: 0 Octeon ubnt_e1000# Octeon ubnt_e1000# version U-Boot 2013.07 (UBNT Build Version: e1000_003_c6018) (May 27 2019 - 06:43:21) mips64-octeon-linux-gnu-gcc (Cavium Inc. Version: SDK_BUILD build 51) 4.7.0 GNU ld (Cavium Inc. Version: SDK_BUILD build 51) 2.23.52 Octeon ubnt_e1000# Octeon ubnt_e1000# flinfo Bank # 1: CFI conformant flash (8 x 8) Size: 8 MB in 135 Sectors AMD Standard command set, Manufacturer ID: 0xC2, Device ID: 0x7E1001 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 3 ms, buffer size: 32 bytes Sector Start Addresses: 1F400000 RO 1F410000 RO 1F420000 RO 1F430000 RO 1F440000 RO 1F450000 RO 1F460000 RO 1F470000 RO 1F480000 RO 1F490000 RO 1F4A0000 RO 1F4B0000 RO 1F4C0000 RO 1F4D0000 RO 1F4E0000 RO 1F4F0000 RO 1F500000 RO 1F510000 RO 1F520000 RO 1F530000 RO 1F540000 RO 1F550000 RO 1F560000 RO 1F570000 RO 1F580000 RO 1F590000 RO 1F5A0000 RO 1F5B0000 RO 1F5C0000 RO 1F5D0000 RO 1F5E0000 RO 1F5F0000 RO 1F600000 RO 1F610000 RO 1F620000 RO 1F630000 RO 1F640000 RO 1F650000 RO 1F660000 RO 1F670000 RO 1F680000 RO 1F690000 RO 1F6A0000 RO 1F6B0000 RO 1F6C0000 RO 1F6D0000 RO 1F6E0000 RO 1F6F0000 RO 1F700000 RO 1F710000 RO 1F720000 RO 1F730000 RO 1F740000 E 1F750000 E 1F760000 E 1F770000 E 1F780000 E 1F790000 E 1F7A0000 E 1F7B0000 E 1F7C0000 E 1F7D0000 E 1F7E0000 E 1F7F0000 E 1F800000 1F810000 E 1F820000 E 1F830000 E 1F840000 E 1F850000 E 1F860000 E 1F870000 E 1F880000 E 1F890000 E 1F8A0000 E 1F8B0000 E 1F8C0000 E 1F8D0000 E 1F8E0000 E 1F8F0000 E 1F900000 E 1F910000 E 1F920000 E 1F930000 E 1F940000 E 1F950000 E 1F960000 E 1F970000 E 1F980000 E 1F990000 E 1F9A0000 E 1F9B0000 E 1F9C0000 E 1F9D0000 E 1F9E0000 E 1F9F0000 E 1FA00000 E 1FA10000 E 1FA20000 E 1FA30000 E 1FA40000 E 1FA50000 E 1FA60000 E 1FA70000 E 1FA80000 E 1FA90000 E 1FAA0000 E 1FAB0000 E 1FAC0000 E 1FAD0000 E 1FAE0000 E 1FAF0000 E 1FB00000 E 1FB10000 E 1FB20000 E 1FB30000 E 1FB40000 E 1FB50000 E 1FB60000 E 1FB70000 E 1FB80000 E 1FB90000 E 1FBA0000 E 1FBB0000 E 1FBC0000 E 1FBD0000 E 1FBE0000 E 1FBF0000 E 1FBF2000 E 1FBF4000 E 1FBF6000 E 1FBF8000 E 1FBFA000 E 1FBFC000 1FBFE000 RO Octeon ubnt_e1000# Octeon ubnt_e1000# qlmclock 1 QLM 1 clock speed: 156250000 Octeon ubnt_e1000# Octeon ubnt_e1000# mdio list mdio-octeon0: 1 - AR8031/AR8033 <--> octeth8 mdio-octeon1: 28 - Cortina CS4223 <--> octeth0 29 - Cortina CS4223 <--> octeth4 Octeon ubnt_e1000# Octeon ubnt_e1000# printenv autoload=n baudrate=115200 boardname=ubnt_e1000 bootcmd=fatload mmc 0 $(loadaddr) vmlinux.64;bootoctlinux $(loadaddr) numcores=$(numcores) endbootargs mem=0 root=/dev/mmcblk0p2 rootdelay=10 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=phys_mapped_flash:2048k(boot0),2048k(boot1),64k(eeprom) bootdelay=0 bootloader_flash_update=bootloaderupdate check_md5sum=yes env_addr=1fbfe000 env_size=2000 eth1addr=78:8a:20:46:cd:0e eth2addr=78:8a:20:46:cd:0f eth3addr=78:8a:20:46:cd:10 eth4addr=78:8a:20:46:cd:11 eth5addr=78:8a:20:46:cd:12 eth6addr=78:8a:20:46:cd:13 eth7addr=78:8a:20:46:cd:14 eth8addr=78:8a:20:46:cd:15 eth9addr=78:8a:20:46:cd:16 ethact=octeth8 ethaddr=78:8a:20:46:cd:0d ethprime=octeth8 flash_base_addr=1f400000 flash_size=800000 flash_unused_addr=1f740000 flash_unused_size=4c0000 loadaddr=0x20000000 md5addr=0x81000000 mtdparts=phys_mapped_flash:2048k(boot0),2048k(boot1),64k(eeprom) nuke_env=protect off $(env_addr) +$(env_size);erase $(env_addr) +$(env_size) numcores=16 numcoreshex=0x10 octeon_failsafe_mode=0 octeon_ram_mode=0 qlm2_mode=xfi qlm3_mode=xfi qlm6_mode=sgmii serial#=788A2046CD0D stderr=serial stdin=serial stdout=serial uboot_flash_addr=bf600000 uboot_flash_size=60140000 ver=U-Boot 2013.07 (UBNT Build Version: e1000_003_c6018) (May 27 2019 - 06:43:21) Environment size: 1370/8188 bytes