Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision | ||
| inbox:tp-link:tp-link_mr200_v4 [2019/03/12 19:18] – Links to supporting activities added tmomas | inbox:toh:tp-link:tp-link_mr200_v4 [2021/01/13 05:12] – [TP-Link Archer MR200 v4] mctifa | ||
|---|---|---|---|
| Line 10: | Line 10: | ||
| LTE Dual band router with 4 fast (100mbps) ethernet ports. | LTE Dual band router with 4 fast (100mbps) ethernet ports. | ||
| - | /*****/ | + | {{ :media:tplink:mr200_v4_overview.png?nolink& |
| - | /* How to add images ========> | + | |
| - | /*****/ | + | |
| - | + | ||
| - | {{ media:example:genericrouter1.png?200|Generic Router}} | + | |
| ===== OpenWrt support ===== | ===== OpenWrt support ===== | ||
| Line 44: | Line 39: | ||
| ===== Hardware highlights ===== | ===== Hardware highlights ===== | ||
| ^ CPU ^ Ram ^ Flash ^ Network | ^ CPU ^ Ram ^ Flash ^ Network | ||
| - | | MT7628 @ 580MHz | + | | MT7628 @ 580MHz |
| Line 112: | Line 107: | ||
| ===== Hardware ===== | ===== Hardware ===== | ||
| ==== Info ==== | ==== Info ==== | ||
| - | ^ Architecture | + | ^ Architecture |
| - | ^ Vendor | + | ^ Vendor |
| - | ^ Bootloader | + | ^ Bootloader |
| - | ^ System-On-Chip | + | ^ System-On-Chip |
| - | ^ CPU/ | + | ^ CPU/ |
| - | ^ Flash-Chip | + | ^ Flash-Chip |
| - | ^ Flash size | + | ^ Flash size | 8 MB |
| - | ^ RAM | EXAMPLE | + | ^ RAM |
| - | ^ Wireless | + | ^ Wireless 2.4GHz |
| - | ^ Ethernet | + | ^ Wireless 5 GHz | 802.11ac/ |
| - | ^ USB | EXAMPLE 1x 2.0 | | + | ^ Modem | QualComm 9207 LTE, 3G | |
| - | ^ Serial | + | ^ Ethernet |
| - | ^ JTAG | + | ^ ::: | 1 10/100Mbps LAN/WAN Port | |
| + | ^ USB | ||
| + | ^ Serial | ||
| + | ^ JTAG | No | ||
| Line 143: | Line 141: | ||
| /* Thanks, your wiki administration - Oct. 2015 */ | /* Thanks, your wiki administration - Oct. 2015 */ | ||
| - | **Insert photo of front of the casing** | + | **Front PCB** |
| + | {{ : | ||
| **Insert photo of back of the casing** | **Insert photo of back of the casing** | ||
| Line 160: | Line 158: | ||
| -> [[docs: | -> [[docs: | ||
| - | How to connect to the Serial Port of this specific device:\\ | + | How to connect to the Serial Port of MR-200 V4: |
| - | **Insert photo of PCB with markings for serial port** | + | |
| + | |||
| + | {{ : | ||
| + | |||
| + | {{ : | ||
| - | <WRAP BOX> | ||
| - | FIXME //Replace EXAMPLE by real values.// | ||
| - | </ | ||
| - | ^ Serial connection parameters\\ for TP-Link MR200 v4 | EXAMPLE | + | ^ Serial connection parameters\\ for TP-Link MR200 v4 | 115200, 8N1 | |
| ==== JTAG ==== | ==== JTAG ==== | ||
| Line 178: | Line 177: | ||
| ==== OEM bootlog ==== | ==== OEM bootlog ==== | ||
| <WRAP bootlog> | <WRAP bootlog> | ||
| - | < | + | < |
| + | DDR Calibration DQS reg = 00008889 | ||
| + | |||
| + | |||
| + | U-Boot 1.1.3 (Oct 22 2018 - 11:01:41) | ||
| + | |||
| + | Board: Ralink APSoC DRAM: 64 MB | ||
| + | relocate_code Pointer at: 83fb4000 | ||
| + | gpiomode1 55154404. | ||
| + | gpiomode2 05550555. | ||
| + | ######GPIO CTRL 0 for GPIO 0~31 OUTPUT tmp(0x00000030)##### | ||
| + | ######GPIO CTRL 1 for GPIO 32~64 OUTPUT tmp(0x00000f80)##### | ||
| + | ######GPIO CTRL 1 for GPIO 32~64 INPUT tmp(0x00000f80)##### | ||
| + | flash manufacture id: ef, device id 40 17 | ||
| + | find flash: W25Q64BV | ||
| + | ============================================ | ||
| + | Ralink UBoot Version: 4.3.0.0 | ||
| + | -------------------------------------------- | ||
| + | ASIC 7628_MP (Port5< | ||
| + | DRAM component: 512 Mbits DDR, width 16 | ||
| + | DRAM bus: 16 bit | ||
| + | Total memory: 64 MBytes | ||
| + | Flash component: SPI Flash | ||
| + | Date:Oct 22 2018 Time: | ||
| + | ============================================ | ||
| + | icache: sets:512, ways:4, linesz:32 , | ||
| + | dcache: sets:256, ways:4, linesz:32 , | ||
| + | |||
| + | ##### The CPU freq = 580 MHZ #### | ||
| + | | ||
| + | RESET MT7628 PHY!!!!!! | ||
| + | continue to starting system. | ||
| + | 0 | ||
| + | disable switch phyport... | ||
| + | |||
| + | 3: System Boot system code via Flash.(0xbc020000) | ||
| + | do_bootm: | ||
| + | ## Booting image at bc020000 ... | ||
| + | | ||
| + | No initrd | ||
| + | ## Transferring control to Linux (at address 8000c150) ... | ||
| + | ## Giving linux memsize in MB, 64 | ||
| + | |||
| + | Starting kernel ... | ||
| + | |||
| + | 怘�������ff�fa�~�~f�`�������怘�怘�f30f�`� | ||
| + | | ||
| + | |||
| + | The CPU feqenuce set to 575 MHz | ||
| + | |||
| + | MIPS CPU sleep mode enabled. | ||
| + | CPU revision is: 00019655 (MIPS 24Kc) | ||
| + | Software DMA cache coherency | ||
| + | Determined physical RAM map: | ||
| + | | ||
| + | Initrd not found or empty - disabling initrd | ||
| + | Zone PFN ranges: | ||
| + | Normal | ||
| + | Movable zone start PFN for each node | ||
| + | early_node_map[1] active PFN ranges | ||
| + | 0: 0x00000000 -> 0x00004000 | ||
| + | Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 | ||
| + | Kernel command line: console=ttyS1, | ||
| + | PID hash table entries: 256 (order: -2, 1024 bytes) | ||
| + | Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | ||
| + | Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | ||
| + | Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes. | ||
| + | Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | ||
| + | Writing ErrCtl register=00039563 | ||
| + | Readback ErrCtl register=00039563 | ||
| + | Memory: 60868k/ | ||
| + | NR_IRQS: | ||
| + | console [ttyS1] enabled | ||
| + | Calibrating delay loop... 386.04 BogoMIPS (lpj=772096) | ||
| + | pid_max: default: 4096 minimum: 301 | ||
| + | Mount-cache hash table entries: 512 | ||
| + | NET: Registered protocol family 16 | ||
| + | RALINK_GPIOMODE = 55154404 | ||
| + | RALINK_GPIOMODE = 55144404 | ||
| + | ***** Xtal 40MHz ***** | ||
| + | start PCIe register access | ||
| + | RALINK_RSTCTRL = 2400000 | ||
| + | RALINK_CLKCFG1 = fdbfffc0 | ||
| + | |||
| + | *************** MT7628 PCIe RC mode ************* | ||
| + | PCIE0 enabled | ||
| + | Port 0 N_FTS = 1b105000 | ||
| + | init_rt2880pci done | ||
| + | bio: create slab < | ||
| + | usbcore: registered new interface driver usbfs | ||
| + | usbcore: registered new interface driver hub | ||
| + | usbcore: registered new device driver usb | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | pci 0000: | ||
| + | BAR0 at slot 0 = 0 | ||
| + | bus=0x0, slot = 0x0 | ||
| + | res[0]-> | ||
| + | res[0]-> | ||
| + | res[1]-> | ||
| + | res[1]-> | ||
| + | res[2]-> | ||
| + | res[2]-> | ||
| + | res[3]-> | ||
| + | res[3]-> | ||
| + | res[4]-> | ||
| + | res[4]-> | ||
| + | res[5]-> | ||
| + | res[5]-> | ||
| + | bus=0x1, slot = 0x0 | ||
| + | res[0]-> | ||
| + | res[0]-> | ||
| + | res[1]-> | ||
| + | res[1]-> | ||
| + | res[2]-> | ||
| + | res[2]-> | ||
| + | res[3]-> | ||
| + | res[3]-> | ||
| + | res[4]-> | ||
| + | res[4]-> | ||
| + | res[5]-> | ||
| + | res[5]-> | ||
| + | bus=0x1, slot = 0x0 | ||
| + | res[0]-> | ||
| + | res[0]-> | ||
| + | res[1]-> | ||
| + | res[1]-> | ||
| + | res[2]-> | ||
| + | res[2]-> | ||
| + | res[3]-> | ||
| + | res[3]-> | ||
| + | res[4]-> | ||
| + | res[4]-> | ||
| + | res[5]-> | ||
| + | res[5]-> | ||
| + | Switching to clocksource Ralink Systick timer | ||
| + | NET: Registered protocol family 2 | ||
| + | IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | TCP established hash table entries: 2048 (order: 2, 16384 bytes) | ||
| + | TCP bind hash table entries: 2048 (order: 1, 8192 bytes) | ||
| + | TCP: Hash tables configured (established 2048 bind 2048) | ||
| + | TCP reno registered | ||
| + | NET: Registered protocol family 1 | ||
| + | RT3xxx EHCI/OHCI init. | ||
| + | squashfs: version 4.0 (2009/ | ||
| + | fuse init (API version 7.15) | ||
| + | msgmni has been set to 118 | ||
| + | io scheduler noop registered | ||
| + | io scheduler deadline registered (default) | ||
| + | Ralink gpio driver initialized | ||
| + | i2cdrv_major = 218 | ||
| + | Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled | ||
| + | serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A | ||
| + | serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A | ||
| + | brd: module loaded | ||
| + | flash manufacture id: ef, device id 40 17 | ||
| + | W25Q64BV(ef 40170000 flash_version = 1) (8192 Kbytes) | ||
| + | mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 | ||
| + | Creating 6 MTD partitions on " | ||
| + | 0x000000000000-0x000000020000 : " | ||
| + | 0x000000020000-0x000000160000 : " | ||
| + | 0x000000160000-0x0000007d0000 : " | ||
| + | mtd: partition " | ||
| + | 0x0000007d0000-0x0000007e0000 : " | ||
| + | 0x0000007e0000-0x0000007f0000 : " | ||
| + | 0x0000007f0000-0x000000800000 : " | ||
| + | Register flash device: | ||
| + | PPP generic driver version 2.4.2 | ||
| + | PPP MPPE Compression module registered | ||
| + | NET: Registered protocol family 24 | ||
| + | PPTP driver version 0.8.5 | ||
| + | tun: Universal TUN/TAP device driver, 1.6 | ||
| + | tun: (C) 1999-2004 Max Krasnyansky < | ||
| + | ehci_hcd: USB 2.0 ' | ||
| + | FM_OUT value: u4FmOut = 0(0x00000000) | ||
| + | FM_OUT value: u4FmOut = 126(0x0000007E) | ||
| + | FM detection done! loop = 1 | ||
| + | SR calibration value u1SrCalVal = 7 | ||
| + | rt3xxx-ehci rt3xxx-ehci: | ||
| + | rt3xxx-ehci rt3xxx-ehci: | ||
| + | rt3xxx-ehci rt3xxx-ehci: | ||
| + | rt3xxx-ehci rt3xxx-ehci: | ||
| + | hub 1-0:1.0: USB hub found | ||
| + | hub 1-0:1.0: 1 port detected | ||
| + | ohci_hcd: USB 1.1 ' | ||
| + | rt3xxx-ohci rt3xxx-ohci: | ||
| + | rt3xxx-ohci rt3xxx-ohci: | ||
| + | rt3xxx-ohci rt3xxx-ohci: | ||
| + | hub 2-0:1.0: USB hub found | ||
| + | hub 2-0:1.0: 1 port detected | ||
| + | Mirror/ | ||
| + | u32 classifier | ||
| + | Actions configured | ||
| + | Netfilter messages via NETLINK v0.30. | ||
| + | nf_conntrack version 0.5.0 (951 buckets, 3804 max) | ||
| + | GRE over IPv4 demultiplexor driver | ||
| + | gre: can't add protocol | ||
| + | GRE over IPv4 tunneling driver | ||
| + | ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux | ||
| + | TCP cubic registered | ||
| + | NET: Registered protocol family 10 | ||
| + | ip6_tables: (C) 2000-2006 Netfilter Core Team | ||
| + | IPv6 over IPv4 tunneling driver | ||
| + | NET: Registered protocol family 17 | ||
| + | NET: Registered protocol family 15 | ||
| + | Ebtables v2.0 registered | ||
| + | 802.1Q VLAN Support v1.8 Ben Greear < | ||
| + | All bugs added by David S. Miller < | ||
| + | VFS: Mounted root (squashfs filesystem) readonly on device 31:2. | ||
| + | Freeing unused kernel memory: 184k freed | ||
| + | starting pid 35, tty '': | ||
| + | cp: can't stat '/ | ||
| + | SCSI subsystem initialized | ||
| + | insmod: can't insert '/ | ||
| + | Initializing USB Mass Storage driver... | ||
| + | usbcore: registered new interface driver usb-storage | ||
| + | USB Mass Storage support registered. | ||
| + | insmod: can't insert '/ | ||
| + | rdm_major = 253 | ||
| + | spiflash_ioctl_read, | ||
| + | Read MAC from flash(0x7EF100) ffffffd8-0d-17-02-40-ffffff9b | ||
| + | GMAC1_MAC_ADRH -- : 0x0000d80d | ||
| + | GMAC1_MAC_ADRL -- : 0x1702409b | ||
| + | Ralink APSoC Ethernet Driver Initilization. v3.1 256 rx/tx descriptors allocated, mtu = 1500! | ||
| + | spiflash_ioctl_read, | ||
| + | Read MAC from flash(0x7EF100) ffffffd8-0d-17-02-40-ffffff9b | ||
| + | GMAC1_MAC_ADRH -- : 0x0000d80d | ||
| + | GMAC1_MAC_ADRL -- : 0x1702409b | ||
| + | PROC INIT OK! | ||
| + | usbcore: registered new interface driver cdc_wdm | ||
| + | usbcore: registered new interface driver qmi_wwan | ||
| + | usbcore: registered new interface driver usbserial | ||
| + | USB Serial support registered for generic | ||
| + | usbcore: registered new interface driver usbserial_generic | ||
| + | usbserial: USB Serial Driver core | ||
| + | dns_init | ||
| + | domain_name: | ||
| + | L2TP core driver, V2.0 | ||
| + | PPPoL2TP kernel driver, V2.0 | ||
| + | [err] syslogd[main --763] syslogd : syslogd_init | ||
| + | |||
| + | usb 1-1: new high speed USB device using rt3xxx-ehci and address 2 | ||
| + | [zc] qmi_wwan_bind: | ||
| + | [zc] change dtr 1 | ||
| + | spiflash_ioctl_read, | ||
| + | Init mac d8-0d-17-02-40-9c | ||
| + | qmi_wwan: probe of 1-1:1.0 failed with error -22 | ||
| + | usbserial_generic 1-1:1.0: generic converter detected | ||
| + | usb 1-1: generic converter now attached to ttyUSB0 | ||
| + | [zc] qmi_wwan_bind: | ||
| + | [zc] change dtr 1 | ||
| + | spiflash_ioctl_read, | ||
| + | Init mac d8-0d-17-02-40-9c | ||
| + | qmi_wwan: probe of 1-1:1.1 failed with error -22 | ||
| + | qmi_wwan 1-1:1.2: bogus CDC Union: master=0, slave=0 | ||
| + | qmi_wwan: probe of 1-1:1.2 failed with error -1 | ||
| + | qmi_wwan 1-1:1.3: bogus CDC Union: master=0, slave=0 | ||
| + | qmi_wwan: probe of 1-1:1.3 failed with error -1 | ||
| + | qmi_wwan 1-1:1.4: cdc-wdm0: USB WDM device | ||
| + | [zc] qmi_wwan_bind: | ||
| + | [zc] change dtr 1 | ||
| + | spiflash_ioctl_read, | ||
| + | Init mac d8-0d-17-02-40-9c | ||
| + | scsi0 : usb-storage 1-1:1.5 | ||
| + | scsi 0:0:0:0: Direct-Access | ||
| + | sd 0:0:0:0: [sda] 130048 512-byte logical blocks: (66.5 MB/63.5 MiB) | ||
| + | sd 0:0:0:0: [sda] Write Protect is off | ||
| + | sd 0:0:0:0: [sda] Assuming drive cache: write through | ||
| + | sd 0:0:0:0: [sda] Assuming drive cache: write through | ||
| + | | ||
| + | sd 0:0:0:0: [sda] Assuming drive cache: write through | ||
| + | sd 0:0:0:0: [sda] Attached SCSI removable disk | ||
| + | linux_qmi_qmux_io_pwr_up_init.c: | ||
| + | qmuxd: linux_qmi_read_sysfs_config: | ||
| + | qmuxd: opening connection for conn_id=1 [DATA6_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=2 [DATA7_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=3 [DATA8_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=4 [DATA9_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=5 [DATA12_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=6 [DATA13_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=7 [DATA14_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=9 [DATA15_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=10 [DATA16_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=11 [DATA17_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=21 [SDIO_DATA1_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=22 [SDIO_DATA2_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=23 [SDIO_DATA3_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=24 [SDIO_DATA4_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=25 [SDIO_DATA5_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=26 [SDIO_DATA6_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=27 [SDIO_DATA7_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=28 [SDIO_DATA8_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=29 [MDM_DATA1_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=30 [MDM_DATA2_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=31 [MDM_DATA3_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=32 [MDM_DATA4_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=33 [MDM_DATA5_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=34 [MDM_DATA6_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=35 [MDM_DATA7_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=36 [MDM_DATA8_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=48 [SMUX0] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=49 [MDM2_DATA1_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=50 [MDM2_DATA2_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=51 [MDM2_DATA3_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=52 [MDM2_DATA4_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=53 [MDM2_DATA5_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=54 [MDM2_DATA6_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=55 [MDM2_DATA7_CNTL] failed | ||
| + | qmi_qmux_open_connection: | ||
| + | qmuxd: opening connection for conn_id=56 [MDM2_DATA8_CNTL] failed | ||
| + | |||
| + | Please press Enter to activate this console. qmi_ctl_rx_msg.c Can't find txn info for txn_id = 1 | ||
| + | [ dm_readFile ] 2042: can not open xml file / | ||
| + | [ judgeProductName ] 2157: Device is MR200 | ||
| + | |||
| + | [ judgeProductName ] 2190: Device is MR200v4 | ||
| + | |||
| + | [ dm_readFile ] 2042: can not open xml file / | ||
| + | spiflash_ioctl_read, | ||
| + | spiflash_ioctl_read, | ||
| + | spiflash_ioctl_read, | ||
| + | spiflash_ioctl_read, | ||
| + | [ checkUdiskReady ] 069: [cos] times:0, mount cmd:mount -t auto /dev/sda / | ||
| + | |||
| + | FAT: utf8 is not a recommended IO charset for FAT filesystems, | ||
| + | spiflash_ioctl_read, | ||
| + | 17 INFO: src/ | ||
| + | wstat_main.c(18) main(): LTE flospiflash_ioctl_read, | ||
| + | wstat process starts working! | ||
| + | 1spiflash_ioctl_read, | ||
| + | 7 ERROR: Post evspiflash_ioctl_read, | ||
| + | ent to MOBILE server failed, errno = 2 (No such file or directory). | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 17 ERROR: Client communication with server failed. | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 17 ERROR: src/ | ||
| + | Raeth v3.1 (Tasklet, | ||
| + | |||
| + | phy_tx_ring = 0x036ec000, tx_ring = 0xa36ec000 | ||
| + | |||
| + | phy_rx_ring0 = 0x036ed000, rx_ring0 = 0xa36ed000 | ||
| + | [fe_sw_init: | ||
| + | disable switch phyport... | ||
| + | GMAC1_MAC_ADRH -- : 0x0000d80d | ||
| + | GMAC1_MAC_ADRL -- : 0x1702409b | ||
| + | RT305x_ESW: Link Status Changed | ||
| + | 18 ERROR: Post event to MOBILE server failed, erspiflash_ioctl_read, | ||
| + | rno = 2 (No such file or directory). | ||
| + | 18 ERROR: Client communication with server failed. | ||
| + | 18 ERROR: Post event to MOBILE server failed, errno = 2 (No such file or directory). | ||
| + | 18 ERROR: Client communication with server failed. | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | Query new SMS count success.18 ERROR: New sms count is 0 | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 18 USER: Mobile device manager (qmi) initialized OK. | ||
| + | Init QMI services...... | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 19 USER: Start get voice service object. | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 19 USER: VOICE Service Object got. | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 19 USER: VOICE QMI Client Init successfully, | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 19 USER: Mobile device manager (qmi) initialized OK. | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 21 USER: Not registered, searching! | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | 1451606421 ERROR: 0x00000034 QMI_ERR_DEVICE_NOT_READY | ||
| + | 1451606421 ERROR: Failed to get smsc address (0). | ||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | [err] syslogd[syslogd_msg_process --652] syslogd : log module is not config | ||
| + | |||
| + | spiflash_ioctl_read, | ||
| + | sendto /var/tmp/7 msg 2001 error No such file or directory ,pid 106 | ||
| + | [ oal_sys_getOldTZInfo ] 732: Open TZ file error! | ||
| + | Fri Jan 1 01:00:21 UTC 2016 | ||
| + | sh: can't create / | ||
| + | ioctl: No such device | ||
| + | Fri Jan 1 01:00:21 UTC 2016 | ||
| + | brctl: bridge br0: Invalid argument | ||
| + | set if eth0.2 to *not wan dev | ||
| + | device eth0.2 entered promiscuous mode | ||
| + | device eth0 entered promiscuous mode | ||
| + | br0: port 1(eth0.2) entering forwarding state | ||
| + | br0: port 1(eth0.2) entering forwarding state | ||
| + | set if eth0.3 to *not wan dev | ||
| + | device eth0.3 entered promiscuous mode | ||
| + | br0: port 2(eth0.3) entering forwarding state | ||
| + | br0: port 2(eth0.3) entering forwarding state | ||
| + | set if eth0.4 to *not wan dev | ||
| + | device eth0.4 entered promiscuous mode | ||
| + | br0: port 3(eth0.4) entering forwarding state | ||
| + | br0: port 3(eth0.4) entering forwarding state | ||
| + | set if eth0.5 to *not wan dev | ||
| + | device eth0.5 entered promiscuous mode | ||
| + | br0: port 4(eth0.5) entering forwarding state | ||
| + | br0: port 4(eth0.5) entering forwarding state | ||
| + | set if eth0.5 to wan dev | ||
| + | [ vlan_addLanPortsIntoBridge ] 512: add lan Port 255 from br0 | ||
| + | brctl: bridge br0: Device or resource busy | ||
| + | brctl: bridge br0: Device or resource busy | ||
| + | brctl: bridge br0: Device or resource busy | ||
| + | brctl: bridge br0: Device or resource busy | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | ra0 no private ioctls. | ||
| + | |||
| + | |||
| + | |||
| + | === pAd = c0c28000, size = 914848 === | ||
| + | |||
| + | <-- RTMPAllocTxRxRingMemory, | ||
| + | <-- RTMPAllocAdapterBlock, | ||
| + | RtmpChipOpsHook(492): | ||
| + | mt7628_init()--> | ||
| + | mt7628_init(FW(8a00), | ||
| + | e2.bin mt7628_init(1135):: | ||
| + | mt_bcn_buf_init(218): | ||
| + | < | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | Interface doesn' | ||
| + | set (8BE2): Network is down | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | [ oal_wlan_ra_lteCoexistence ] 6899: Get Curr band err 0. | ||
| + | |||
| + | No need to switch channel. | ||
| + | [ oal_sht: | ||
| + | wlan_ra_lteCoexiTX_BCN DESC a2127000 size = 320 | ||
| + | stence ] 6989: RX[0] DESC a212b000 size = 4096 | ||
| + | |||
| + | AutoChannelSkiRX[1] DESC a212e000 size = 2048 | ||
| + | pList = 12; | ||
| + | |||
| + | cfg_mode=9 | ||
| + | cfg_mode=9 | ||
| + | wmode_band_equal(): | ||
| + | AndesSendCmdMsg: | ||
| + | APSDCapable[0]=0 | ||
| + | APSDCapable[1]=0 | ||
| + | APSDCapable[2]=0 | ||
| + | APSDCapable[3]=0 | ||
| + | APSDCapable[4]=0 | ||
| + | APSDCapable[5]=0 | ||
| + | APSDCapable[6]=0 | ||
| + | APSDCapable[7]=0 | ||
| + | APSDCapable[8]=0 | ||
| + | APSDCapable[9]=0 | ||
| + | APSDCapable[10]=0 | ||
| + | APSDCapable[11]=0 | ||
| + | APSDCapable[12]=0 | ||
| + | APSDCapable[13]=0 | ||
| + | APSDCapable[14]=0 | ||
| + | APSDCapable[15]=0 | ||
| + | Key1Str is Invalid key length(0) or Type(0) | ||
| + | Key1Str is Invalid key length(0) or Type(0) | ||
| + | Key2Str is Invalid key length(0) or Type(0) | ||
| + | Key2Str is Invalid key length(0) or Type(0) | ||
| + | Key3Str is Invalid key length(0) or Type(0) | ||
| + | Key3Str is Invalid key length(0) or Type(0) | ||
| + | Key4Str is Invalid key length(0) or Type(0) | ||
| + | Key4Str is Invalid key length(0) or Type(0) | ||
| + | WscKeyASCII=8 | ||
| + | WscKeyASCII=8 | ||
| + | load fw image from fw_header_image | ||
| + | AndesMTLoadFwMethod1(2261):: | ||
| + | FW Version:1 | ||
| + | FW Build Date: | ||
| + | CmdAddressLenReq: | ||
| + | CmdFwStartReq: | ||
| + | CmdStartDLRsp: | ||
| + | MtAsicDMASchedulerInit(): | ||
| + | efuse_probe: | ||
| + | RtmpChipOpsEepromHook:: | ||
| + | RtmpEepromGetDefault:: | ||
| + | RtmpChipOpsEepromHook: | ||
| + | NVM is FLASH mode | ||
| + | 1. Phy Mode = 14 | ||
| + | exec! | ||
| + | spiflash_ioctl_read, | ||
| + | eeFlashId = 0x7628! | ||
| + | Country Region from e2p = ffff | ||
| + | tssi_1_target_pwr_g_band = 30 | ||
| + | 2. Phy Mode = 14 | ||
| + | 3. Phy Mode = 14 | ||
| + | NICInitPwrPinCfg(11): | ||
| + | NICInitializeAsic(651): | ||
| + | mt_mac_init()--> | ||
| + | MtAsicInitMac()--> | ||
| + | mt7628_init_mac_cr()--> | ||
| + | MtAsicSetMacMaxLen(1277): | ||
| + | < | ||
| + | WTBL Segment 1 info: | ||
| + | MemBaseAddr/ | ||
| + | EntrySize/ | ||
| + | WTBL Segment 2 info: | ||
| + | MemBaseAddr/ | ||
| + | EntrySize/ | ||
| + | WTBL Segment 3 info: | ||
| + | MemBaseAddr/ | ||
| + | EntrySize/ | ||
| + | WTBL Segment 4 info: | ||
| + | MemBaseAddr/ | ||
| + | EntrySize/ | ||
| + | AntCfgInit(2943): | ||
| + | MCS Set = ff ff 00 00 01 | ||
| + | MtAsicSetChBusyStat(861): | ||
| + | [PMF]ap_pmf_init:: | ||
| + | [PMF]RTMPMakeRsnIeCap: | ||
| + | [PMF]ap_pmf_init:: | ||
| + | MtAsicSetRalinkBurstMode(3145): | ||
| + | MtAsicSetPiggyBack(796): | ||
| + | reload DPD from flash , 0x9F = [c000] doReload bit7[0] | ||
| + | CmdLoadDPDDataFromFlash: | ||
| + | MtAsicSetTxPreamble(3124): | ||
| + | CmdSlotTimeSet: | ||
| + | MtAsicAddSharedKeyEntry(1344): | ||
| + | The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 | ||
| + | MtAsicSetPreTbtt(): | ||
| + | Main bssid = d8: | ||
| + | <==== rt28xx_init, | ||
| + | @@@ ed_monitor_init : ===> | ||
| + | @@@ ed_monitor_init : <=== | ||
| + | mt7628_set_ed_cca: | ||
| + | sht: | ||
| + | WiFi Startup Cost (ra0): 3.768s | ||
| + | Set_ed_chk_proc():: | ||
| + | mt7628_set_ed_cca: | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 | ||
| + | : Device is MR200v4 | ||
| + | |||
| + | ra0 RTMPInfClose done. | ||
| + | MtAsicSetPreTbtt(): | ||
| + | MtAsicSetPiggyBack(796): | ||
| + | tx_kickout_fail_count = 0 | ||
| + | tx_timeout_fail_count = 0 | ||
| + | rx_receive_fail_count = 0 | ||
| + | alloc_cmd_msg = 159 | ||
| + | free_cmd_msg = 159 | ||
| + | device ra0 entered promiscuous mode | ||
| + | device ra1 entered promiscuous mode | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | WLAN-Start wlNetlinkTool | ||
| + | Waiting for Wireless Events from interfaces... | ||
| + | swWlanChkAhbErr: | ||
| + | rai0 no private ioctls. | ||
| + | |||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | spiflash_ioctl_read, | ||
| + | read radio success, offset 0x7f8000, size 0x400 | ||
| + | eeFlashId = 0x7610! | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | Interface doesn' | ||
| + | set (8BE2): Network is down | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | load fw spent 16ms | ||
| + | [ oal_wlan_ra_setWpsUPnP ] 6297: rai0: cannot open scpd xml file | ||
| + | |||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | 0x1300 = 00064300 | ||
| + | Interface doesn' | ||
| + | set (8BE2): Invalid argument | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | spiflash_ioctl_read, | ||
| + | read radio success, offset 0x7f8000, size 0x400 | ||
| + | eeFlashId = 0x7610! | ||
| + | device rai0 entered promiscuous mode | ||
| + | device rai1 entered promiscuous mode | ||
| + | wlNetlinkTool is already there. | ||
| + | [ util_judgeProductName ] 601: Device is MR200 | ||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 106 | ||
| + | sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 106 | ||
| + | sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 106 | ||
| + | [src/ | ||
| + | |||
| + | [src/ | ||
| + | |||
| + | [src/ | ||
| + | |||
| + | mmmInit(): | ||
| + | ************************************************************* | ||
| + | *************************MMM TABLE DUMP********************** | ||
| + | ------------------------------------------------------------- | ||
| + | | ||
| + | ------------------------------------------------------------- | ||
| + | | ||
| + | ------------------------------------------------------------- | ||
| + | | ||
| + | ------------------------------------------------------------- | ||
| + | 1 | ||
| + | 2 | ||
| + | 3 | ||
| + | 4 | ||
| + | 5 | ||
| + | 6 | ||
| + | 7 | ||
| + | 8 | ||
| + | ------------------------------------------------------------- | ||
| + | | ||
| + | ------------------------------------------------------------- | ||
| + | (nil) | ||
| + | ************************************************************* | ||
| + | sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 106 | ||
| + | sendto /var/tmp/9 msg 2004 error No such file or directory ,pid 106 | ||
| + | insmod: can't insert '/ | ||
| + | insmod: can't insert '/ | ||
| + | lin: oal_WritePptpVpnFile start! | ||
| + | iptables: Bad rule (does a matching rule exist in that chain?). | ||
| + | killall: npd6: no process killed | ||
| + | radvd starting | ||
| + | iptables: Bad rule (does a matching rule exist in that chain?). | ||
| + | [rsl_initWanLteIntfCfgObj 3263] init LTE module, set flowstat [enableDataLimit 0, enablePaymentDay 0, paymentDay 1, limitation 0, warningPercent 90] | ||
| + | [initProfileList 413] LTE Module: profile num [1], default profile [0], active profile [0] | ||
| + | [initProfileList 415] DM: profile num [1], default profile [0], active profile [0] | ||
| + | / | ||
| + | [ getPidFromPidFile ] 112: Cann't open file: / | ||
| + | [ getPidFromPidFile ] 112: Cann't open file: / | ||
| + | iptables: Bad rule (does a matching rule exist in that chain?). | ||
| + | iptables: Bad rule (does a matching rule exist in that chain?). | ||
| + | iptables: Bad rule (does a matching rule exist in that chain?). | ||
| + | [src/ | ||
| + | |||
| + | [src/ | ||
| + | |||
| + | [src/ | ||
| + | |||
| + | nf_nat_rtsp v0.6.21 loading | ||
| + | iptables: Bad rule (does a matching rule exist in that chain?). | ||
| + | ip6tables: Bad rule (does a matching rule exist in that chain?). | ||
| + | ip6tables: Bad rule (does a matching rule exist in that chain?). | ||
| + | enable switch phyport...] 601: Device is MR200 | ||
| + | |||
| + | |||
| + | [ util_judgeProductName ] 634: Device is MR200v4 | ||
| + | |||
| + | Set: phy[0].reg[0] = 3900 | ||
| + | Set: phy[1].reg[0] = 3900 | ||
| + | Set: phy[2].reg[0] = 3900 | ||
| + | Set: phy[3].reg[0] = 3900 | ||
| + | Set: phy[4].reg[0] = 3900 | ||
| + | Set: phy[0].reg[0] = 3300 | ||
| + | Set: phy[1].reg[0] = 3300 | ||
| + | Set: phy[2].reg[0] = 3300 | ||
| + | Set: phy[3].reg[0] = 3300 | ||
| + | Set: phy[4].reg[0] = 3300 | ||
| + | resetMiiPortV over. | ||
| + | Set: phy[0].reg[4] = 01e1 | ||
| + | Set: phy[0].reg[0] = 3300 | ||
| + | Set: phy[1].reg[4] = 01e1 | ||
| + | Set: phy[1].reg[0] = 3300 | ||
| + | Set: phy[2].reg[4] = 01e1 | ||
| + | Set: phy[2].reg[0] = 3300 | ||
| + | Set: phy[3].reg[4] = 01e1 | ||
| + | Set: phy[3].reg[0] = 3300 | ||
| + | Set: phy[4].reg[4] = 01e1 | ||
| + | Set: phy[4].reg[0] = 3300 | ||
| + | turn off flow control over. | ||
| + | </ | ||
| </ | </ | ||
| ==== OpenWrt bootlog ==== | ==== OpenWrt bootlog ==== | ||
| <WRAP bootlog> | <WRAP bootlog> | ||
| - | < | + | < |
| + | |||
| + | DDR Calibration DQS reg = 00008889 | ||
| + | |||
| + | |||
| + | |||
| + | U-Boot 1.1.3 (Oct 22 2018 - 11:01:41) | ||
| + | |||
| + | |||
| + | Board: Ralink APSoC DRAM: 64 MB | ||
| + | |||
| + | relocate_code Pointer at: 83fb4000 | ||
| + | |||
| + | gpiomode1 55154404. | ||
| + | |||
| + | gpiomode2 05550555. | ||
| + | |||
| + | ######GPIO CTRL 0 for GPIO 0~31 OUTPUT tmp(0x00000030)##### | ||
| + | |||
| + | ######GPIO CTRL 1 for GPIO 32~64 OUTPUT tmp(0x00000f80)##### | ||
| + | |||
| + | ######GPIO CTRL 1 for GPIO 32~64 INPUT tmp(0x00000f80)##### | ||
| + | |||
| + | flash manufacture id: ef, device id 40 17 | ||
| + | |||
| + | find flash: W25Q64BV | ||
| + | |||
| + | ============================================ | ||
| + | |||
| + | Ralink UBoot Version: 4.3.0.0 | ||
| + | |||
| + | -------------------------------------------- | ||
| + | |||
| + | ASIC 7628_MP (Port5< | ||
| + | |||
| + | DRAM component: 512 Mbits DDR, width 16 | ||
| + | |||
| + | DRAM bus: 16 bit | ||
| + | |||
| + | Total memory: 64 MBytes | ||
| + | |||
| + | Flash component: SPI Flash | ||
| + | |||
| + | Date:Oct 22 2018 Time: | ||
| + | |||
| + | ============================================ | ||
| + | |||
| + | icache: sets:512, ways:4, linesz:32 , | ||
| + | |||
| + | dcache: sets:256, ways:4, linesz:32 , | ||
| + | |||
| + | |||
| + | ##### The CPU freq = 580 MHZ #### | ||
| + | |||
| + | | ||
| + | |||
| + | RESET MT7628 PHY!!!!!! | ||
| + | |||
| + | continue to starting system. | ||
| + | |||
| + | 0 | ||
| + | |||
| + | disable switch phyport... | ||
| + | |||
| + | |||
| + | |||
| + | 3: System Boot system code via Flash.(0xbc020000) | ||
| + | |||
| + | do_bootm: | ||
| + | |||
| + | ## Booting image at bc020000 ... | ||
| + | |||
| + | | ||
| + | |||
| + | No initrd | ||
| + | |||
| + | ## Transferring control to Linux (at address 80000000) ... | ||
| + | |||
| + | ## Giving linux memsize in MB, 64 | ||
| + | |||
| + | |||
| + | Starting kernel ... | ||
| + | |||
| + | |||
| + | [ 0.000000] Linux version 4.14.105 (nsvee@halyard) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9584-5107176861)) #0 Fri Mar 15 21:04:11 2019 | ||
| + | [ 0.000000] Board has DDR2 | ||
| + | [ 0.000000] Analog PMU set to hw control | ||
| + | [ 0.000000] Digital PMU set to hw control | ||
| + | [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2 | ||
| + | [ 0.000000] bootconsole [early0] enabled | ||
| + | [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) | ||
| + | [ 0.000000] MIPS: machine is TP-Link Archer MR200 V4 | ||
| + | [ 0.000000] Determined physical RAM map: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Initrd not found or empty - disabling initrd | ||
| + | [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. | ||
| + | [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | ||
| + | [ 0.000000] Zone ranges: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Movable zone start for each node | ||
| + | [ 0.000000] Early memory node ranges | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] | ||
| + | [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/ | ||
| + | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 | ||
| + | [ 0.000000] Kernel command line: console=ttyS0, | ||
| + | [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) | ||
| + | [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | ||
| + | [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | ||
| + | [ 0.000000] Writing ErrCtl register=00039563 | ||
| + | [ 0.000000] Readback ErrCtl register=00039563 | ||
| + | [ 0.000000] Memory: 59784K/ | ||
| + | [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, | ||
| + | [ 0.000000] NR_IRQS: 256 | ||
| + | [ 0.000000] intc: using register map from devicetree | ||
| + | [ 0.000000] CPU Clock: 580MHz | ||
| + | [ 0.000000] timer_probe: | ||
| + | [ 0.000000] clocksource: | ||
| + | [ 0.000010] sched_clock: | ||
| + | [ 0.007539] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) | ||
| + | [ 0.073494] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.078163] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.084517] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.096556] clocksource: | ||
| + | [ 0.106050] futex hash table entries: 256 (order: -1, 3072 bytes) | ||
| + | [ 0.111989] pinctrl core: initialized pinctrl subsystem | ||
| + | [ 0.117522] NET: Registered protocol family 16 | ||
| + | [ 0.229468] mt7620-pci 10140000.pcie: | ||
| + | [ 0.384754] PCI host bridge / | ||
| + | [ 0.389333] | ||
| + | [ 0.394353] | ||
| + | [ 0.415451] mt7621_gpio 10000600.gpio: | ||
| + | [ 0.421089] mt7621_gpio 10000600.gpio: | ||
| + | [ 0.426597] mt7621_gpio 10000600.gpio: | ||
| + | [ 0.432758] PCI host bridge to bus 0000:00 | ||
| + | [ 0.436661] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] | ||
| + | [ 0.443344] pci_bus 0000:00: root bus resource [io 0xffffffff] | ||
| + | [ 0.449002] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] | ||
| + | [ 0.455567] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | ||
| + | [ 0.463631] pci 0000: | ||
| + | [ 0.472421] pci 0000: | ||
| + | [ 0.478751] pci 0000: | ||
| + | [ 0.485523] pci 0000: | ||
| + | [ 0.492024] pci 0000: | ||
| + | [ 0.498598] pci 0000: | ||
| + | [ 0.505132] pci 0000: | ||
| + | [ 0.511698] pci 0000: | ||
| + | [ 0.516470] pci 0000: | ||
| + | [ 0.527316] clocksource: | ||
| + | [ 0.533297] NET: Registered protocol family 2 | ||
| + | [ 0.538284] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.544974] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.551163] TCP: Hash tables configured (established 1024 bind 1024) | ||
| + | [ 0.557446] UDP hash table entries: 256 (order: 0, 4096 bytes) | ||
| + | [ 0.563039] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | ||
| + | [ 0.569380] NET: Registered protocol family 1 | ||
| + | [ 0.576810] Crashlog allocated RAM at address 0x3f00000 | ||
| + | [ 0.583388] workingset: timestamp_bits=30 max_order=14 bucket_order=0 | ||
| + | [ 0.594889] squashfs: version 4.0 (2009/ | ||
| + | [ 0.600519] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | ||
| + | [ 0.619384] io scheduler noop registered | ||
| + | [ 0.623114] io scheduler deadline registered (default) | ||
| + | [ 0.628998] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | ||
| + | [ 0.636179] console [ttyS0] disabled | ||
| + | [ 0.639684] 10000c00.uartlite: | ||
| + | [ 0.648410] console [ttyS0] enabled | ||
| + | [ 0.648410] console [ttyS0] enabled | ||
| + | [ 0.655398] bootconsole [early0] disabled | ||
| + | [ 0.655398] bootconsole [early0] disabled | ||
| + | [ 0.663988] cacheinfo: Failed to find cpu0 device node | ||
| + | [ 0.669247] cacheinfo: Unable to detect cache hierarchy for CPU 0 | ||
| + | [ 0.676108] spi-mt7621 10000b00.spi: | ||
| + | [ 0.694553] m25p80 spi0.0: s25fl064k (8192 Kbytes) | ||
| + | [ 0.699505] 5 fixed-partitions partitions found on MTD device spi0.0 | ||
| + | [ 0.705942] Creating 5 MTD partitions on " | ||
| + | [ 0.710837] 0x000000000000-0x000000020000 : " | ||
| + | [ 0.716738] 0x000000020000-0x0000007d0000 : " | ||
| + | [ 0.724913] 2 tplink-fw partitions found on MTD device firmware | ||
| + | [ 0.730991] Creating 2 MTD partitions on " | ||
| + | [ 0.736036] 0x000000000000-0x00000017f09e : " | ||
| + | [ 0.741978] 0x00000017f0a0-0x0000007b0000 : " | ||
| + | [ 0.747828] mtd: device 3 (rootfs) set to be root filesystem | ||
| + | [ 0.754999] 1 squashfs-split partitions found on MTD device rootfs | ||
| + | [ 0.761356] 0x000000590000-0x0000007b0000 : " | ||
| + | [ 0.767815] 0x0000007d0000-0x0000007e0000 : " | ||
| + | [ 0.773375] 0x0000007e0000-0x0000007f0000 : " | ||
| + | [ 0.779398] 0x0000007f0000-0x000000800000 : " | ||
| + | [ 0.785789] libphy: Fixed MDIO Bus: probed | ||
| + | [ 0.802335] rt3050-esw 10110000.esw: | ||
| + | [ 0.809106] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 | ||
| + | [ 0.819159] NET: Registered protocol family 10 | ||
| + | [ 0.827379] Segment Routing with IPv6 | ||
| + | [ 0.831209] NET: Registered protocol family 17 | ||
| + | [ 0.835768] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 0.850821] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. | ||
| + | [ 0.859088] Freeing unused kernel memory: 192K | ||
| + | [ 0.863590] This architecture does not have kernel memory protection. | ||
| + | [ 2.012791] init: Console is alive | ||
| + | [ 2.016488] init: - watchdog - | ||
| + | [ 2.317345] random: fast init done | ||
| + | [ 4.281780] kmodloader: loading kernel modules from / | ||
| + | [ 4.548208] usbcore: registered new interface driver usbfs | ||
| + | [ 4.553845] usbcore: registered new interface driver hub | ||
| + | [ 4.559412] usbcore: registered new device driver usb | ||
| + | [ 4.615315] ehci_hcd: USB 2.0 ' | ||
| + | [ 4.631184] SCSI subsystem initialized | ||
| + | [ 4.640391] ehci-platform: | ||
| + | [ 4.656015] phy phy-10120000.usbphy.0: | ||
| + | [ 4.662829] phy phy-10120000.usbphy.0: | ||
| + | [ 4.668157] ehci-platform 101c0000.ehci: | ||
| + | [ 4.674023] ehci-platform 101c0000.ehci: | ||
| + | [ 4.682186] ehci-platform 101c0000.ehci: | ||
| + | [ 4.717335] ehci-platform 101c0000.ehci: | ||
| + | [ 4.724638] hub 1-0:1.0: USB hub found | ||
| + | [ 4.728887] hub 1-0:1.0: 1 port detected | ||
| + | [ 4.940169] usbcore: registered new interface driver usb-storage | ||
| + | [ 4.947012] kmodloader: done loading kernel modules from / | ||
| + | [ 4.957015] init: - preinit - | ||
| + | [ 6.306102] rt3050-esw 10110000.esw: | ||
| + | Press the [f] key and hit [enter] to enter failsafe mode | ||
| + | Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | ||
| + | [ 6.487245] random: procd: uninitialized urandom read (4 bytes read) | ||
| + | [ 6.677340] usb 1-1: new high-speed USB device number 2 using ehci-platform | ||
| + | [ 6.896704] usb-storage 1-1:1.5: USB Mass Storage device detected | ||
| + | [ 6.903827] scsi host0: usb-storage 1-1:1.5 | ||
| + | [ 7.959897] scsi 0:0:0:0: Direct-Access | ||
| + | [ 7.974440] sd 0:0:0:0: [sda] 130048 512-byte logical blocks: (66.6 MB/63.5 MiB) | ||
| + | [ 7.982800] sd 0:0:0:0: [sda] Write Protect is off | ||
| + | [ 7.988552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn' | ||
| + | [ 8.013080] | ||
| + | [ 8.023804] sd 0:0:0:0: [sda] Attached SCSI removable disk | ||
| + | [ 9.724600] jffs2: notice: (421) jffs2_build_xattr_subsystem: | ||
| + | [ 9.742242] mount_root: switching to jffs2 overlay | ||
| + | [ 9.779352] overlayfs: upper fs does not support tmpfile. | ||
| + | [ 9.791055] urandom-seed: | ||
| + | [ 9.875842] rt3050-esw 10110000.esw: | ||
| + | [ 9.909052] procd: - early - | ||
| + | [ 9.912095] procd: - watchdog - | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | Please press Enter to activate this console. | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | </ | ||
| </ | </ | ||
| Line 191: | Line 1236: | ||
| [[meta: | [[meta: | ||
| - | {{tag> | + | {{tag> |