Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
inbox:tp-link:tp-link_archer_c2300_v1 [2018/11/01 20:12] – [Tags] antossinbox:toh:tp-link:tp-link_archer_c2300_v1 [2021/02/07 22:48] (current) – Fixed WikiDevi link dsouza
Line 6: Line 6:
  
  
-===== Hardware Highlights ===== +===== OpenWrt support ===== 
----- datatable ---+ 
-cols    Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ +<color red>**Not supported.**</color> 
-header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB + 
-align   : c,c,c,c,c,c,c,c,c,c,c,c + 
-filter  : Brand=TP-Link +===== Supporting activities ===== 
-filter  : Model=Archer C2300 +//Describe if there are any ongoing activities that might lead to OpenWrt support.// 
-filter  Versions~v1.0+ 
 +  * OpenWrt forum thread: [[https://forum.openwrt.org/t/support-for-tp-link-archer-c2300/24957]] 
 + 
 + 
 +/*** if info availableuncomment and fill in 
 +===== Experimental firmware ===== 
 + 
 +//List experimental firmware download links here.// 
 + 
 +//None at this time.// 
 + 
 +  * External image (add link) 
 +  * trunk image (add link) 
 +  * ... 
 +***/ 
 + 
 + 
 +===== Hardware highlights ===== 
 +  * [[https://deviwiki.com/wiki/TP-LINK_Archer_C2300_v1.x]] 
 + 
 +CPU                        ^ Ram      ^ Flash   ^ Network     WLAN   ^ USB      ^ Serial   ^ JTag   ^ 
 +| Broadcom BCM4906 @ 1,8 GHz    512 MiB  |  128 MiB  |  5x Gbit  |  abgnac    1x 2.01x3.0    ?    |   ?    | 
 + 
 +===== Bootlogs ===== 
 + 
 +==== OEM bootlog ==== 
 +(sourcehttps://github.com/acc-/tplink-archer-c2300/wiki/Boot-logs by Adam acc-) 
 + 
 +<WRAP bootlog> 
 +<nowiki>
 ---- ----
 +BTRM
 +V1.6
 +CPU0
 +L1CD
 +MMUI
 +MMU7
 +DATA
 +ZBBS
 +MAIN
 +OTP?
 +OTPP
 +USBT
 +NAND
 +IMG?
 +IMGL
 +UHD?
 +UHDP
 +RLO?
 +RLOP
 +UBI?
 +UBIP
 +PASS
 +----
 +HELO
 +5.0202HNDrc7-1.0.38-161.122
 +
 +CPU0
 +L1CD
 +MMUI
 +MMU>
 +CODE
 +ZBBS
 +MAIN
 +NVRAM memcfg 0x1427
 +
 +MCB chksum 0xa89ec7d9, config 0x1427
 +
 +
 +MemsysInit lpf0_generic_aarch64 1.3.0.1 20150910
 +
 +DDR3
 +
 +900017E8 80018000 8001A000 00000000 00000000 0050371A
 +
 +MCB rev=0x00040301 Ref ID=0x0371A Sub Bld=0x005
 +
 +Dram Timing 11-11-11
 +
 +
 +DDR3-1600 CL11 total 512MB 1 16bits part[s] %1 SSC
 +
 +
 +Add/Ctl Alignment
 +no adjustment
 +
 +
 +ZQ Cal LP PHY
 +
 + R in Ohm
 +
 + P: Finger=0x2D0 Term=0x78 Drv=0x2A
 +
 + N: Finger=0x2D0 Term=0x78 Drv=0x2A
 +
 +
 +PLL Ref(Hz)=0x02FAF080 UI STEPS=0x039
 +
 + DDR CLK(MHz)=0x31B WL CLK dly(ps)=0x0C8 bitT(ps)=0x274 VDLsize(fs)=0x2B09 CLK_VDL=0x01A
 +
 +
 +SHMOO 28nm
 +8001A000 80018800 00000000 00020000 00000000
 +
 +
 +Shmoo WL
 +
 +
 +One UI Steps : 0x44
 +
 +
 +auto-clk result = 00B (filter=0C steps)
 +initial CLK shift = 01A
 +final CLK shift   = 00B
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 S----------------X++++++++++++++++++++++++++++++++++++++++++++++++++
 +
 +01 S----------------X++++++++++++++++++++++++++++++++++++++++++++++++++
 +
 +
 +Shmoo RD En
 +
 +FORCED WR ODT = 0x18001800
 +
 + DQSN DRIVE PAD CONTROL (from) (to)
 +
 + B0 00031A31 00079A31
 +
 + B1 00031A31 00079A31
 +
 +B0 RISE UI=1 VDL=17 PICK UI=2 VDL=17
 +
 +B1 RISE UI=1 VDL=15 PICK UI=2 VDL=15
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 --S--------------------X++++++++++++++++++++++++++++++++++++++++++++
 +
 +01 --S------------------X++++++++++++++++++++++++++++++++++++++++++++++
 +
 +
 +Shmoo RD DQ NP
 +
 +DQS :
 +
 +B0 VDL=39 ok
 +
 +B1 VDL=39 ok
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------------
 +
 +01 -------+++++++++++++++++++++++X+++++++++++++++++++++++--------------
 +
 +02 ---++++++++++++++++++++++++X++++++++++++++++++++++++----------------
 +
 +03 ---------++++++++++++++++++++++++X++++++++++++++++++++++++----------
 +
 +04 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +05 --------++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +06 ---++++++++++++++++++++++++X+++++++++++++++++++++++++---------------
 +
 +07 ----------++++++++++++++++++++++++X+++++++++++++++++++++++++--------
 +
 +08 -------+++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +09 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +10 --------+++++++++++++++++++++++X+++++++++++++++++++++++-------------
 +
 +11 ----++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +12 ---------++++++++++++++++++++++++X++++++++++++++++++++++++----------
 +
 +13 ------++++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +14 -------++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 +
 +15 --------++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 +
 +
 +Shmoo RD DQ P
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 +++++++++++++++++++++++++X++++++++++++++++++++++++++----------------
 +
 +01 -----++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 +
 +02 +++++++++++++++++++++++++X++++++++++++++++++++++++++----------------
 +
 +03 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 +
 +04 --++++++++++++++++++++++++++X++++++++++++++++++++++++++-------------
 +
 +05 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 +
 +06 ++++++++++++++++++++++++++X++++++++++++++++++++++++++---------------
 +
 +07 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++--------
 +
 +08 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +09 --+++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +10 ------++++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +11 --+++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +12 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 +
 +13 --++++++++++++++++++++++++++X++++++++++++++++++++++++++-------------
 +
 +14 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 +
 +15 -----+++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 +
 +
 +Shmoo RD DQ N
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------------
 +
 +01 -------+++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +02 ---++++++++++++++++++++++++X++++++++++++++++++++++++----------------
 +
 +03 ---------++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 +
 +04 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +05 --------++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +06 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +07 ----------++++++++++++++++++++++++X+++++++++++++++++++++++++--------
 +
 +08 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +09 ----+++++++++++++++++++++++++X++++++++++++++++++++++++++------------
 +
 +10 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +11 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 +
 +12 ---------++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 +
 +13 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 +
 +14 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +15 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 +
 +
 +RD DQS adjustments :
 +BL0: Start: 0x39 Final: 0x39
 +
 +BL1: Start: 0x39 Final: 0x39
 +
 +
 +Shmoo WR DQ
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 -++++++++++++++++++++++++X++++++++++++++++++++++++------------------
 +
 +01 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +02 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------------
 +
 +03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +04 --+++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +05 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +06 -++++++++++++++++++++++++X+++++++++++++++++++++++++-----------------
 +
 +07 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +08 ----++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +09 --++++++++++++++++++++++++X+++++++++++++++++++++++++----------------
 +
 +10 ------+++++++++++++++++++++++X++++++++++++++++++++++++--------------
 +
 +11 -++++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +12 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +13 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +14 ----+++++++++++++++++++++++++X++++++++++++++++++++++++++------------
 +
 +15 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 +
 +
 +Shmoo WR DM
 +
 +WR DM
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
 +
 +01 --+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----------
 +
 +DDR test done successfully
 +
 +
 +FPS0
 +----
 +PAR0
 +J000
 +JFFS
 +BT00
 +0008
 +----
 +PAR1
 +NONE
 +NAN9
 +----
 +TRY0
 +NAN3
 +JFS2
 +RFS1
 +JFFS
 +JFS2
 +NAN5
 +
 +
 +Base: 5.2_02HNDrc7
 +CFE version 1.0.38-161.122 for BCM94908 (64bit,SP,LE)
 +Build Date: Wed Sep 20 08:36:53 CST 2017 (rock@rock-computer)
 +Copyright (C) 2000-2015 Broadcom Corporation.
 +
 +Boot Strap Register:  0x6fc42
 +Chip ID: BCM4906_A0, Broadcom B53 Quad Core: 1800MHz
 +Total Memory: 536870912 bytes (512MB)
 +NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
 +NAND flash device: MXIC MX30LF1G08AA, id 0xc2f1 block 128KB size 131072KB
 +pmc_init:PMC using DQM mode
 +pmc_init:7 0 fe540465 351034b
 +Board IP address                  : 192.168.1.1:ffffff00  
 +Host IP address                   : 192.168.1.100  
 +Gateway IP address                :   
 +Run from flash/host/tftp (f/h/c)  : f  
 +Default host run file name        : vmlinux  
 +Default host flash file name      : bcm963xx_fs_kernel  
 +Boot delay (0-9 seconds)          : 1  
 +Default host ramdisk file name    :   
 +Default ramdisk store address     :   
 +Default DTB file name             :   
 +Board Id                          : 94908REF  
 +Number of MAC Addresses (1-64)    : 11  
 +Base MAC Address                  : 02:10:18:01:00:01  
 +PSI Size (1-128) KBytes           : 48  
 +Enable Backup PSI [0|1]           : 0  
 +System Log Size (0-256) KBytes    : 0  
 +Auxillary File System Size Percent: 0  
 +flow memory allocation (MB)       : 14  
 +buffer memory allocation (MB)     : 32  
 +DHD 0 memory allocation (MB)      : 0  
 +DHD 1 memory allocation (MB)      : 0  
 +DHD 2 memory allocation (MB)      : 0  
 +WLan Feature                      : 0x00  
 +Partition 1 Size (MB)             : 0M  
 +Partition 2 Size (MB)             : 8M  
 +Partition 3 Size (MB)             : 0M  
 +Partition 4 Size (MB) (Data)      : 4M 
 +
 +Initalizing switch low level hardware.
 +Software Resetting Switch ... Done.
 +Waiting MAC port Rx/Tx to be enabled by hardware ...Done
 +Disable Switch All MAC port Rx/Tx
 +*** Press any key to stop auto run (1 seconds) ***
 +Auto run second count down: 110
 +Booting from only image (address 0x00100000, flash offset 0x00100000) ...
 +Decompression LZMA Image OK!
 +Entry at 0x0000000000080000
 +Starting program at 0x0000000000080000
 +/memory = 0x20000000
 +debug.zy dhd param1 value 0xe 
 +debug.zy dhd param2 value 0x0 
 +debug.zy dhd param3 value 0x0 
 +Booting Linux on physical CPU 0x0
 +
 +Linux version 4.1.27 (rock@rock-computer) (gcc version 5.3.0 (Buildroot 2016.02) ) #35 SMP PREEMPT Tue Nov 21 10:30:24 CST 2017
 +
 +CPU: AArch64 Processor [420f1000] revision 0
 +
 +Detected VIPT I-cache on CPU0
 +
 +alternatives: enabling workaround for ARM erratum 845719
 +
 +PERCPU: Embedded 16 pages/cpu @ffffffc01ffd4000 s25216 r8192 d32128 u65536
 +
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122112
 +
 +Kernel command line: console=ttyS0,115200 init=/etc/preinit irqaffinity=0 coherent_pool=1M
 +
 +PID hash table entries: 2048 (order: 2, 16384 bytes)
 +
 +Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
 +
 +Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
 +
 +Memory: 439988K/495616K available (4879K kernel code, 277K rwdata, 1648K rodata, 228K init, 430K bss, 55628K reserved, 0K cma-reserved)
 +
 +Virtual kernel memory layout:
 +
 +    vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000     247 GB)
 +
 +    vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000       7 GB maximum)
 +
 +              0xffffffbe00000000 - 0xffffffbe00700000       7 MB actual)
 +
 +    fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000      12 KB)
 +
 +    PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000      16 MB)
 +
 +    modules : 0xffffffbffc000000 - 0xffffffc000000000      64 MB)
 +
 +    memory  : 0xffffffc000000000 - 0xffffffc020000000     512 MB)
 +
 +      .init : 0xffffffc0006e1000 - 0xffffffc00071a000     228 KB)
 +
 +      .text : 0xffffffc000080000 - 0xffffffc0006e0574    6530 KB)
 +
 +      .data : 0xffffffc00071b000 - 0xffffffc0007605a0     278 KB)
 +
 +Preemptible hierarchical RCU implementation.
 +
 + RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 +
 +RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
 +
 +NR_IRQS:64 nr_irqs:64 0
 +
 +Architected cp15 timer(s) running at 50.00MHz (phys).
 +
 +clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
 +
 +sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
 +
 +BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here
 +
 +     Remapping interrupts...
 +
 +             hwirq      virq
 +
 +               61         5
 +
 +               64         6
 +
 +               66         7
 +
 +               91         8
 +
 +               92         9
 +
 +               93        10
 +
 +               77        11
 +
 +               78        12
 +
 +               79        13
 +
 +               80        14
 +
 +               81        15
 +
 +               82        16
 +
 +               83        17
 +
 +               84        18
 +
 +               85        19
 +
 +               86        20
 +
 +               88        21
 +
 +               96        22
 +
 +               97        23
 +
 +               98        24
 +
 +               99        25
 +
 +              118        26
 +
 +              119        27
 +
 +              106        28
 +
 +              104        29
 +
 +              105        30
 +
 +               76        31
 +
 +              120        32
 +
 +              110        33
 +
 +              148        34
 +
 +              154        35
 +
 +              155        36
 +
 +              156        37
 +
 +              157        38
 +
 +              158        39
 +
 +              159        40
 +
 +               69        41
 +
 +     Remapping IO memories...
 +
 +             phys              virt          size
 +
 +       00000000ff800000  ffffff8000008000  00003000
 +
 +       00000000ff858000  ffffff8000002000  00001000
 +
 +       00000000ff85a000  ffffff800000c000  00001000
 +
 +       00000000ffe00000  ffffff8000040000  00020000
 +
 +       0000000080002000  ffffff800000e000  00001000
 +
 +       0000000080018000  ffffff8000010000  00004000
 +
 +       0000000080200000  ffffff8000018000  00005000
 +
 +       0000000080280000  ffffff8000016000  00001000
 +
 +       0000000082200000  ffffff8000080000  00100000
 +
 +       0000000080080000  ffffff8000200000  00050000
 +
 +       0000000080008000  ffffff8000020000  00003fff
 +
 +       000000008000c000  ffffff8000028000  00003fff
 +
 +       0000000081060000  ffffff8000030000  00004000
 +
 +       0000000080100000  ffffff8000038000  00002000
 +
 +       0000000080010000  ffffff800001e000  00001000
 +
 +       000000008001d000  ffffff800003c000  00001010
 +
 +       000000008001c000  ffffff8000026000  00000448
 +
 +console [ttyS0] enabled
 +
 +Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
 +
 +pid_max: default: 32768 minimum: 301
 +
 +Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +
 +Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +
 +--Kernel Config--
 +
 +  SMP=1
 +
 +  PREEMPT=1
 +
 +  DEBUG_SPINLOCK=0
 +
 +  DEBUG_MUTEXES=0
 +
 +Broadcom Logger v0.1
 +
 +creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd0
 +
 +Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
 +
 +creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flow
 +
 +pmc_init:PMC using DQM mode
 +
 +CPU1: Booted secondary processor
 +
 +Detected VIPT I-cache on CPU1
 +
 +Brought up 2 CPUs
 +
 +SMP: Total of 2 processors activated.
 +
 +CPU: All CPU(s) started at EL2
 +
 +alternatives: patching kernel code
 +
 +clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 +
 +NET: Registered protocol family 16
 +
 +cpuidle: using governor ladder
 +
 +cpuidle: using governor menu
 +
 +vdso: 2 pages (1 code @ ffffffc000721000, 1 data @ ffffffc000720000)
 +
 +DMA: preallocated 1024 KiB pool for atomic allocations
 +
 +ACPI: Interpreter disabled.
 +
 +SCSI subsystem initialized
 +
 +usbcore: registered new interface driver usbfs
 +
 +usbcore: registered new interface driver hub
 +
 +usbcore: registered new device driver usb
 +
 +bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
 +
 +skbFreeTask created successfully
 +
 +gbpm_do_work scheduled
 +
 +[0;34mBLOG v3.0 Initialized[0m
 +
 +BLOG Rule v1.0 Initialized
 +
 +Broadcom IQoS v0.1 initialized
 +
 +Broadcom GBPM v0.1 initialized
 +
 +Switched to clocksource arch_sys_counter
 +
 +pnp: PnP ACPI: disabled
 +
 +NET: Registered protocol family 2
 +
 +TCP established hash table entries: 4096 (order: 3, 32768 bytes)
 +
 +TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
 +
 +TCP: Hash tables configured (established 4096 bind 4096)
 +
 +UDP hash table entries: 256 (order: 1, 8192 bytes)
 +
 +UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
 +
 +NET: Registered protocol family 1
 +
 +futex hash table entries: 512 (order: 3, 32768 bytes)
 +
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +
 +exFAT: Version 1.2.9
 +
 +ntfs: driver 2.1.32 [Flags: R/O].
 +
 +jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
 +
 +io scheduler noop registered (default)
 +
 +brd: module loaded
 +
 +loop: module loaded
 +
 +nand: Could not find valid ONFI parameter page; aborting
 +
 +nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
 +
 +nand: Macronix NAND 128MiB 3,3V 8-bit
 +
 +nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
 +
 +bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x65324458 timing_2 to 0x80040e54
 +
 +bcm63xx_nand ff801800.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
 +
 +Bad block table found at page 65472, version 0x01
 +
 +Bad block table found at page 65408, version 0x01
 +
 +>>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<
 +
 +Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and vmlinux filesystem
 +
 +Creating 9 MTD partitions on "brcmnand.0":
 +
 +0x000000460000-0x000003a00000 : "rootfs"
 +
 +0x000003a00000-0x000007300000 : "rootfs_update"
 +
 +0x000007b00000-0x000007f00000 : "data"
 +
 +0x000000000000-0x000000100000 : "nvram"
 +
 +0x000000100000-0x000003a00000 : "image"
 +
 +0x000003a00000-0x000007300000 : "image_update"
 +
 +0x000000100000-0x000000460000 : "bootfs"
 +
 +0x000000000000-0x000008000000 : "dummy2"
 +
 +0x000007300000-0x000007b00000 : "misc2"
 +
 +PPP generic driver version 2.4.2
 +
 +PPP BSD Compression module registered
 +
 +PPP Deflate Compression module registered
 +
 +i2c /dev entries driver
 +
 +brcmboard registered
 +
 +brcmboard: brcm_board_init entry
 +
 +print_rst_status: Last RESET due to POR reset
 +
 +print_rst_status: RESET reason: 0x00000000
 +
 +set_ext_irq_info ERROR: Invalid index entry 255 max is 6   ext_irq 255 BP_EXT_INTR_FLAGS_MASK 0x8000e000 BP_EXT_INTR_0 0x0
 +
 +set_ext_irq_info ERROR: Invalid index entry 255 max is 6   ext_irq 255 BP_EXT_INTR_FLAGS_MASK 0x8000e000 BP_EXT_INTR_0 0x0
 +
 +set_ext_irq_info ERROR: Invalid index entry 255 max is 6   ext_irq 255 BP_EXT_INTR_FLAGS_MASK 0x8000e000 BP_EXT_INTR_0 0x0
 +
 +GPIO: Reset Button Polling is enabled on gpio 8017
 +
 +GPIO: Led Button Polling is enabled on gpio 8012
 +
 +GPIO: Wifi Button Polling is enabled on gpio 8016
 +
 +SES: Button Polling is enabled on gpio 8015
 +
 +SES: LED GPIO 0x400c is enabled
 +
 +DYING GASP IRQ Initialized and Enabled
 +
 +map_hw_timer_interrupt,132: interrupt_id 22
 +
 +map_hw_timer_interrupt,132: interrupt_id 23
 +
 +map_hw_timer_interrupt,132: interrupt_id 24
 +
 +map_hw_timer_interrupt,132: interrupt_id 25
 +
 +Serial: BCM63XX driver $Revision: 3.00 $
 +
 +[0;33mMagic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands)[0m
 +
 +ttyS0 at MMIO 0xff800640 (irq = 6, base_baud = 921600) is a BCM63XX
 +
 +BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=35951, buf size=2240
 +
 +Broadcom BPM Module Char Driver v0.1 Registered<3004>[0m
 +
 +PCIe HCD (impl1)
 +
 +  bcm963xx-pcie: found core [0] Rev [ 3. 4]
 +
 +bcm963xx-pcie bcm963xx-pcie.0: PCI host bridge to bus 0000:00
 +
 +pci_bus 0000:00: root bus resource [mem 0xc0000000-0xcfffffff]
 +
 +pci_bus 0000:00: root bus resource [bus 00-ff]
 +
 +pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +
 +pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc0bfffff]
 +
 +pci 0000:00:00.0: BAR 9: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
 +
 +pci 0000:01:00.0: BAR 2: assigned [mem 0xc0000000-0xc07fffff 64bit]
 +
 +pci 0000:01:00.0: BAR 4: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
 +
 +pci 0000:01:00.0: BAR 0: assigned [mem 0xc0800000-0xc0807fff 64bit]
 +
 +pci 0000:00:00.0: PCI bridge to [bus 01]
 +
 +pci 0000:00:00.0:   bridge window [mem 0xc0000000-0xc0bfffff]
 +
 +pci 0000:00:00.0:   bridge window [mem 0xc0c00000-0xc0cfffff 64bit pref]
 +
 +pcieport 0000:00:00.0: enabling device (0000 -> 0002)
 +
 +pcieport 0000:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +pci 0000:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +  bcm963xx-pcie: found core [1] Rev [ 3. 4]
 +
 +bcm963xx-pcie bcm963xx-pcie.1: PCI host bridge to bus 0001:00
 +
 +pci_bus 0001:00: root bus resource [mem 0xd0000000-0xdfffffff]
 +
 +pci_bus 0001:00: root bus resource [bus 00-ff]
 +
 +pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +
 +pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0001:00:00.0: BAR 8: assigned [mem 0xd0000000-0xd00fffff]
 +
 +pci 0001:01:00.0: BAR 0: assigned [mem 0xd0000000-0xd0007fff 64bit]
 +
 +pci 0001:00:00.0: PCI bridge to [bus 01]
 +
 +pci 0001:00:00.0:   bridge window [mem 0xd0000000-0xd00fffff]
 +
 +pcieport 0001:00:00.0: enabling device (0000 -> 0002)
 +
 +pcieport 0001:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +pci 0001:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +  bcm963xx-pcie: found core [2] Rev [ 3. 4]
 +
 +  bcm963xx-pcie: failed to bring up core [2] link
 +
 +GACT probability NOT on
 +
 +u32 classifier
 +
 +    input device check on
 +
 +    Actions configured
 +
 +Netfilter messages via NETLINK v0.30.
 +
 +xt_time: kernel timezone is -0000
 +
 +Initializing XFRM netlink socket
 +
 +NET: Registered protocol family 10
 +
 +NET: Registered protocol family 17
 +
 +NET: Registered protocol family 15
 +
 +bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
 +
 +Ebtables v2.0 registered
 +
 +ebt_time registered
 +
 +ebt_ftos registered
 +
 +ebt_wmm_mark registered
 +
 +L2TP core: blog_l2tp_rcv_check 
 +
 +l2tp_core: L2TP core driver, V2.0
 +
 +l2tp_ip: L2TP IP encapsulation support (L2TPv3)
 +
 +l2tp_netlink: L2TP netlink interface
 +
 +l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
 +
 +l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
 +
 +8021q: 802.1Q VLAN Support v1.8
 +
 +ubi0: attaching mtd0
 +
 +ubi0: scanning is finished
 +
 +ubi0: attached mtd0 (name "rootfs", size 53 MiB)
 +
 +ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
 +
 +ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
 +
 +ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
 +
 +ubi0: good PEBs: 429, bad PEBs: 0, corrupted PEBs: 0
 +
 +ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
 +
 +ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
 +
 +ubi0: available PEBs: 0, total reserved PEBs: 429, PEBs reserved for bad PEB handling: 9
 +
 +ubi0: background thread "ubi_bgt0d" started, PID 362
 +
 +UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
 +
 +UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
 +
 +UBIFS (ubi0:0): FS size: 51425280 bytes (49 MiB, 405 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
 +
 +UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
 +
 +UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID BA898232-0BAE-4944-879B-1171735B9C1C, small LPT model
 +
 +VFS: Mounted root (ubifs filesystem) readonly on device 0:11.
 +
 +Freeing unused kernel memory: 228K (ffffffc0006e1000 - ffffffc00071a000)
 +
 +mknod: /dev/flash_chrdev: Read-only file system
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +Mounting filesystems...
 +>>>>> Starting mdev <<<<<
 +>>>>> Creating static device nodes <<<<<
 +>>>>> Mounting /data partition <<<<<
 +>>>>> Mounting data partition as JFFS2 <<<<<
 +wlcsm: module license 'Proprietary' taints kernel.
 +
 +Disabling lock debugging due to kernel taint
 +
 +Initializing WLCSM Module
 +
 +WLCSM Module loaded successfully 
 +
 +*** CHECK: NVRAM file checking... ***
 +*** CHECK: NVRAM file is ok... ***
 +restore done!
 +
 +[TPDATA]: Found misc2 partition on MTD devide 8, attach ubi1: attaching mtd8
 +
 +it.
 +ubi1: scanning is finished
 +
 +ubi1: attached mtd8 (name "misc2", size 8 MiB)
 +
 +ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
 +
 +ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
 +
 +ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
 +
 +ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
 +
 +ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
 +
 +ubi1: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 624428756
 +
 +ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
 +
 +ubi1: background thread "ubi_bgt1d" started, PID 805
 +
 +[TPDATA]: MTD8 attach succ.
 +[TPDATA]: Mounting tp_data UBI volume as UBIFS
 +UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 820
 +
 +UBIFS (ubi1:0): recovery needed
 +
 +UBIFS (ubi1:0): recovery completed
 +
 +UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "tp_data"
 +
 +UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
 +
 +UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
 +
 +UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
 +
 +UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 94BF99E9-2A3E-435D-BF34-DEDCCE3CF54E, small LPT model
 +
 +[TPDATA]: Mount tp_data Done.
 +[product-info]: Check product-info...
 +[product-info]: Done
 +>>>>> Creating static device nodes <<<<<
 +FPM will initialize 2 pool[s] and require 32 MB
 +
 +bcm-fpm: FPM with 2 pool(s)
 +
 +bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000
 +
 +fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d200000
 +
 +Scratch pad is not initialized.
 +
 +RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000
 +
 +configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64
 +
 +++++Runner gso_desc_pool created successfully
 +
 +rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000
 +
 +FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80004de000
 +
 +
 + RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>
 +
 +brcmchipinfo: brcm_chipinfo_init entry
 +
 +NBUFF v1.0 Initialized
 +
 +[0;36;44mInitialized fcache state[0m
 +
 +[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<3002>[0m
 +
 +Created Proc FS /procfs/fcache
 +
 +[0;36;44mBroadcom Packet Flow Cache registered with netdev chain[0m
 +
 +[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.[0m
 +
 +[0;35m[FHW]  pktDbgLvl[0xffffffbffc2a6588]=0[0m
 +
 +[0;34m[FHW]  fhw_construct: [0m
 +
 +[0;36;44mInitialized Fcache HW accelerator layer state[0m
 +
 +flwStatsThread created
 +
 +[0;36;44mConstructed Broadcom Packet Flow Cache v4.0[0m
 +
 +[1m[34mWifi Forwarding Driver is initialized![0m
 +
 +Loading HND Module
 +
 +hnd 281786 0 - Live 0xffffffbffc2ba000
 +emf 23790 0 - Live 0xffffffbffc30e000 (P)
 +igs 13356 0 - Live 0xffffffbffc318000 (P)
 +Tuxera FAT 12/16/32 driver version 3016.7.20 [Flags: R/W MODULE].
 +
 +Built against headers 4.1.27 #12 SMP PREEMPT Sat Dec 31 03:53:08 CST 2016 arm64
 +
 +Running on kernel 4.1.27 #35 SMP PREEMPT Tue Nov 21 10:30:24 CST 2017 aarch64
 +
 +Tuxera NTFS driver 3016.7.1.2.3 [Flags: R/W MODULE].
 +
 +Built against headers 4.1.27 #12 SMP PREEMPT Sat Dec 31 03:53:08 CST 2016 arm64
 +
 +Running on kernel 4.1.27 #35 SMP PREEMPT Tue Nov 21 10:30:24 CST 2017 aarch64
 +
 +Tuxera HFS+ driver 3016.6.21.3- preinit -
 +Press the [f] key and hit [enter] to enter failsafe mode
 +- regular preinit -
 +jffs2 not ready yet; using ramdisk
 +
 +
 +UBIFS error (pid: 1007): cannot open "ubi0:ubi_rootfs_data", error -19random: dd urandom read with 4 bits of entropy available
 +
 +jffs2 not ready yet; using ramdisk
 +- init -
 +
 +Please press Enter to activate this console. tun: Universal TUN/TAP device driver, 1.6
 +
 +tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 +
 +PPP MPPE Compression module registered
 +
 +sit: IPv6 over IPv4 tunneling driver
 +
 +gre: GRE over IPv4 demultiplexor driver
 +
 +ip_gre: GRE over IPv4 tunneling driver
 +
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +
 +NET: Registered protocol family 24
 +
 +nf_conntrack version 0.5.0 (3439 buckets, 13756 max)
 +
 +l2tp_ppp: PPPoL2TP kernel driver, V2.0
 +
 +PPTP driver version 0.8.5
 +
 +ip6_tables: (C) 2000-2006 Netfilter Core Team
 +
 +ctnetlink v0.93: registering with nfnetlink.
 +
 +fuse init (API version 7.23)
 +
 +-------------------------------------------------------------------------------------
 +reloadprofile() begin
 +reloadprofile() end
 +-------------------------------------------------------------------------------------
 +-------------------------------------------------------------------------------------
 +reloadconfig() begin
 +reloadconfig() end
 +===========  merge new config  ===============
 +===========  merge new config  end ===============
 +mergeconfigbycountry() begin
 +user has set country
 +mergeconfigbycountry() do nothing end
 +-------------------------------------------------------------------------------------
 +-------------------------------------------------------------------------------------
 +sh: iqos-db-parser: not found
 +-------------------------------------------------------------------------------------
 +-------------------------------------------------------------------------------------
 +openvpn cert does not exist
 +-------------------------------------------------------------------------------------
 +[reset factory] tp_restore_userconfig_partly_mark = 
 +gmtoff= 01:00
 +GMT-01:00
 +[switch] WAN ifs: "eth0"
 +[switch] LAN ifs: "eth1 eth2 eth3 eth4"
 +[switch] LAG1 ifs: "lag0_"
 +[switch] LAG1 map: "0x0"
 +[switch] LAG1 num: 0
 +BCM_RUNNER_ENET: LAG1 0x0, LAG2 0x0
 +
 +Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1
 +
 +Unused MUX Internal Port#0 connects to Crossbar External Port#0
 +
 +Cross Bar MUX Config : Internal Port 00 maps to External Port 00 <reg_val : 0x00000000>
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00000004>
 +
 +Broadcom BCM4906_A0 Ethernet Network Device v0.1
 +
 +dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 
 +
 +Scratch pad is not initialized.
 +
 +++++ disabling GSO on logical_port=3 dev=eth0
 +
 +eth0: <Int sw port: 3> <Logical : 03> MAC : 02:10:18:01:00:01
 +
 +    Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PHY >
 +
 +eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:02:10:18:01:00:01
 +
 +eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:02:10:18:01:00:01
 +
 +eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:02:10:18:01:00:01
 +
 +eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC:02:10:18:01:00:01
 +
 +NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ] 
 +
 +Ethernet Auto Power Down and Sleep: Enabled
 +
 +Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +All Port Bit Map: 0x0f08: eth0,eth1,eth2,eth3,eth4
 +
 +   Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0
 +
 +   Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:
 +
 +   Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth1,eth2,eth3,eth4
 +
 +   WAN/LAN Both Capable Ports 0x0000:
 +
 +Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=ffffff800025d000, physical=0x1ea0c000
 +
 + Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffffff8000261000, physical=0x1ea10000
 +
 + ===> Activate Deep Green Mode
 +
 +Initialized Runner Unicast Layer
 +
 +Initialized Runner Multicast Layer
 +
 +[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.[0m
 +
 +Enabled Runner binding to Flow Cache
 +
 +Initialized Runner Protocol Layer (800)
 +
 +Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
 +
 +NComm TMS V6.85 Kernel Module loaded.
 +
 +Broadcom 802.1Q VLAN Interface, v0.1
 +
 +RDPA DS WAN UDP Filter Command Driver
 +
 +Ethernet Auto Power Down and Sleep: Enabled
 +
 +Energy Efficient Ethernet: Enabled
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +
 +[switch] Interface eth0 is set to WAN
 +[switch] Interface eth1 tm is set
 +[switch] Interface eth2 tm is set
 +[switch] Interface eth3 tm is set
 +[switch] Interface eth4 tm is set
 +[switch] Interface eth0 tm is set
 +[switch] SETUP switch  base settings success!
 +[switch] SETUP vlan settings success!
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +device eth1 entered promiscuous mode
 +
 +device eth2 entered promiscuous mode
 +
 +device eth3 entered promiscuous mode
 +
 +device eth4 entered promiscuous mode
 +
 +=====>>>>> wifi_calibrate_data_check
 +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +
 +ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 +
 +ehci-platform: EHCI generic platform driver
 +
 +ohci-platform: OHCI generic platform driver
 +
 +++++ Powering up USB blocks
 +
 +dhd_module_init in
 +
 +dhd_queue_budget = 256
 +
 +dhd_sta_threshold = 2048
 +
 +dhd_if_threshold = 65536
 +
 +no wifi platform data, skip
 +
 +PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
 +
 +dhdpcie_init: can't find adapter info for this chip
 +
 +pcieh 0000:01:00.0: enabling device (0000 -> 0002)
 +
 +DHD: dongle ram size is set to 1835008(orig 1835008) at 0x200000
 +
 +dhd:0: fw path:(null) nv path:(null)
 +
 +Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc251268
 +
 + Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calculated entries= 128 RDD Base=0x1ea07000K descriptor=0xffffffbffc251268
 +
 +RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>
 +
 +RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>
 +
 +Scratch pad is not initialized.
 +
 +dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
 +
 +dhd_attach(): thread:dhd_watchdog_thread:101b started
 +
 +dhd_deferred_work_init: work queue initialized 
 +
 +Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc2b0ce0
 +
 + Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc2b0d10
 +
 + [1m[34m wfd_bind: Dev eth5 wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3[0m
 +
 +Instantiating WFD 0 thread
 +
 +dhd:0: fw path:(null) nv path:(null)
 +
 +dhd_bus_download_firmware: firmware path=, nvram path=
 +
 +dhdpcie_ramsize_adj: Enter
 +
 +dhdpcie_ramsize_adj: Adjust dongle RAMSIZE to 0x240000
 +
 +xhci-hcd xhci-hcd.0: xHCI Host Controller
 +
 +xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
 +
 +xhci-hcd xhci-hcd.0: hcc params 0x0250f17c hci version 0x100 quirks 0x00010010
 +
 +xhci-hcd xhci-hcd.0: irq 28, io mem 0x8000d000
 +
 +hub 1-0:1.0: USB hub found
 +
 +hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
 +
 +hotplug detected product:  1d6xhci-hcd xhci-hcd.0: xHCI Host Controller
 +
 +xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
 +
 +usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
 +
 +b/2/401
 +hotphub 2-0:1.0: USB hub found
 +
 +lug detected product:  1d6b/2/401
 +hotplug detectedhub 2-0:1.0: 2 ports detected
 +
 +ehci-platform ehci-platform.0: EHCI Host Controller
 +
 + product:  1d6b/3/401
 +ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 3
 +
 +ehci-platform ehci-platform.0: irq 30, io mem 0x8000c300
 +
 +hotplug detected product:  1d6b/3/401
 +ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
 +
 +hub 3-0:1.0: USB hub found
 +
 +hub 3-0:1.0: 2 ports detected
 +
 +hotplug detected product:  1d6b/2/401
 +ohci-platform ohci-platform.0: Generic Platform OHCI controller
 +
 +ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 4
 +
 +ohci-platform ohci-platform.0: irq 29, io mem 0x8000c400
 +
 +hub 4-0:1.0: USB hub found
 +
 +hub 4-0:1.0: 2 ports detected
 +
 +dhdpcie_download_code_array: Download, Upload and compare succeeded (4366c0-roml/pcie-ag-splitrx-fdap-mbss-mfp-wnm-osen-wl11k-wl11u-txbf-pktctx-amsdutx-ampduretry-chkd2hdma-proptxstatus-11nprop-obss-dbwsw-ringer-dmaindex16-bgdfs-stamon-hostpmac-murx-splitassoc-dyn160-dhdhdr, 2017.11.21.102111, 2017/11/21 10:21:11).
 +
 +hotplug detected product:  1d6b/1/401
 +hotplug detected product:  1d6b/1/401
 +dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
 +
 +usbcore: registered new interface driver usb-storage
 +
 +random: nonblocking pool is initialized
 +
 +PCIe shared addr (0x002bc3fc) read took 196383 usec before dongle is ready
 +
 +DMA RX offset from shared Area 0
 +
 +dhdpcie_readshared: Dongle advertizes 2 size indices
 +
 +dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it
 +
 +H2D DMA WR INDX : array size 576 = 2 * 266
 +
 +D2H DMA RD INDX : array size 64 = 2 * 3
 +
 +D2H DMA WR INDX : array size 64 = 2 * 3
 +
 +H2D DMA RD INDX : array size 576 = 2 * 266
 +
 +ring_info_raw: 56 
 +
 +28 53 43 00 f8 63 43 00 0c 66 43 00 20 68 43 00 
 +
 +26 68 43 00 00 00 00 00 00 00 00 00 00 00 00 00 
 +
 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 +
 +00 00 00 00 0a 01 00 00 
 +
 +dhdpcie_readshared: max H2D queues 266
 +
 +dhd_bus_start: Initializing 266 h2drings
 +
 +dhd_runner_flowmgr_init: bootmem name<dhd0> addr<ffffffc00c400000> size<14680064>
 +
 +Scratch pad is not initialized.
 +
 +Scratch pad is not initialized.
 +
 +Scratch pad is not initialized.
 +
 +Scratch pad is not initialized.
 +
 +dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512
 +
 +Scratch pad is not initialized.
 +
 +dhd_runner_policy_init: N+M Policy = 0 1 (HW)
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 90 23 19 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 80 40 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 4c 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 49 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 44 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 c0 14 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 10 14 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 c8 45 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +usb cycle succeed
 +
 +  0000: 00 cc 45 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 c0 45 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 c4 45 15 00 00 00 00 
 +
 +Attach flowrings pool for 264 rings
 +
 +[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>[0m
 +
 +hotplug detected product:  1d6b/2/401
 +Initial configuration
 +
 +=================================
 +
 + rx_post_flow_ring_base_addr : ffffffc015408000
 +
 + tx_post_flow_ring_base_addr : ffffffc00c3c4000
 +
 + rx_complete_flow_ring_base_addr : ffffffc015440000
 +
 + tx_complete_flow_ring_base_addr : ffffffc015490000
 +
 +
 + r2d_wr_arr_base_addr : ffffff8001562000
 +
 + d2r_rd_arr_base_addr : ffffff8001562402
 +
 + r2d_rd_arr_base_addr : ffffff8001562c00
 +
 + d2r_wr_arr_base_addr : ffffff8001562802
 +
 + tx_post_mgmt_arr_base_addr : ffffff8001563000
 +
 + tx_post_mgmt_arr_base_phys_addr : 0x1545d000
 +
 +
 + r2d_wr_arr_base_phys_addr : 0x1545c000
 +
 + d2r_rd_arr_base_phys_addr : 0x1545c402
 +
 + r2d_rd_arr_base_phys_addr : 0x1545cc00
 +
 + d2r_wr_arr_base_phys_addr : 0x1545c802
 +
 +
 + Doorbell ISR : ffffffbffc81ff00
 +
 + Doorbell CTX : ffffffc018b1b400
 +
 +[0;33;40mRunner DHD Offload initialization complete[0m
 +
 +dhd_rx_frame: net device is NOT registered. drop event packet
 +
 +dhd_rx_frame: net device is NOT registered. drop event packet
 +
 +CUR_ETHERADDR : 6 
 +
 +ac 84 c6 2d c0 36 
 +
 +dhd_sync_with_dongle: GET_REVINFO device 0x43cc, vendor 0x14e4, chipnum 0xaa92
 +
 +Dongle Host Driver, version 1.363.6 (r)
 +
 +Compiled in drivers/net/wireless/bcmdhd on Nov 21 2017 at 10:21:50
 +
 +wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0
 +
 +Register interface [eth5]  MAC: ac:84:c6:2d:c0:36
 +
 +
 +dhd_prot_ioctl: status ret value is -4 
 +
 +dhdpcie_chipmatch: Unsupported vendor 14e4 device 4360
 +
 +dhdpcie_pci_probe: chipmatch failed!!
 +
 +Broadcom PCI Device 0x4906 has allocated with driver pcieport
 +
 +Broadcom PCI Device 0x4906 has allocated with driver pcieport
 +
 +dhd_module_init out
 +
 +CONSOLE: 000000.000 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 srom rev:0
 +
 +CONSOLE: 000000.000 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 000000.000 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 000000.000 Setting clocks to 800/400/200
 +
 +CONSOLE: 000000.000 si_set_bb_vcofreq_frac: only work on 4360, 4350
 +
 +CONSOLE: 000000.000 Enabling D-cache
 +
 +CONSOLE: 026738.568 gic_dist_init max_irq 64
 +
 +CONSOLE: 026738.569 c_init: Watchdog reset bit set, clearing
 +
 +CONSOLE: 026738.569 
 +
 +CONSOLE: RTE (PCIE-MSG_BUF) 10.10.122.308 (r) on BCM43666 r4 @ 40.0/200.0/800.0MHz
 +
 +CONSOLE: 026738.569 nvram_init: called again without calling nvram_exit()
 +
 +CONSOLE: 026738.569 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 026738.587 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.602 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.608 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.615 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.617 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.617 srom rev:0
 +
 +CONSOLE: 026738.617 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 026738.617 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 026738.617 allocating a max of 511 rxcplid buffers
 +
 +CONSOLE: 026738.617 pciemsgbuf0: Broadcom PCIE MSGBUF driver
 +
 +CONSOLE: 026738.617 nvram_init: called again without calling nvram_exit()
 +
 +CONSOLE: 026738.617 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 026738.634 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.649 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.656 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.662 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.664 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.664 srom rev:0
 +
 +CONSOLE: 026738.664 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 026738.664 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 026738.664 wlc_ucode_download: wl0: Loading non-MU ucode
 +
 +CONSOLE: 026738.665 reclaim section 0: Returned 216 bytes to the heap
 +
 +CONSOLE: 026738.665 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 026738.682 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.697 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.704 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.711 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.712 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.713 srom rev:0
 +
 +CONSOLE: 026738.713 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 026738.713 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 026738.713 wlc_bmac_attach, deviceid 0x43cc nbands 1
 +
 +CONSOLE: 026738.719 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000
 +
 +CONSOLE: 026738.720 wl0: wlc_bmac_attach: chiprev 4 corerev 65 cccap 0x58400009 maccap 0xf0018705 band 5G, phy_type 11 phy_rev 33
 +
 +CONSOLE: 026738.720 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026738.720 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026738.721 wl0: wlc_stf_txcore_shmem_write: No clock
 +
 +CONSOLE: 026738.721 wl0: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512
 +
 +CONSOLE: 026738.724 wl_eventq_dup_event: wl_eventq not initialized
 +
 +CONSOLE: 026738.724 wl_eventq_dup_event: wl_eventq not initialized
 +
 +CONSOLE: 026738.724 wl0: Broadcom BCM43666 802.11 Wireless Controller 10.10.122.308 (r)
 +
 +CONSOLE: 026738.724 SPLITRX_MODE_2 enabled : tcmsegsize 160 
 +
 +CONSOLE: 026738.724 TCAM: 512 used: 228 exceed:0
 +
 +CONSOLE: 026738.724 reclaim section 1: Returned 180292 bytes to the heap
 +
 +CONSOLE: 026738.725 ThreadX v5.6 initialized
 +
 +CONSOLE: 
 +
 +CONSOLE: 026739.054 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026739.054 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +Lan Domain: tplinklogin.net
 +
 +Lan Domain: www.tplinklogin.net
 +
 +wl_module_init: passivemode set to 0x0
 +
 +wl_module_init: txworkq set to 0x0
 +
 +wl 0001:01:00.0: enabling device (0000 -> 0002)
 +
 +eth6: Broadcom BCM4360 802.11 Wireless Controller 7.14.164.3 (TOB) (r)
 +
 +device eth6 entered promiscuous mode
 +
 +br-lan: port 5(eth6) entered forwarding state
 +
 +br-lan: port 5(eth6) entered forwarding state
 +
 +device wl1.1 entered promiscuous mode
 +
 +br-lan: port 6(wl1.1) entered forwarding state
 +
 +br-lan: port 6(wl1.1) entered forwarding state
 +
 +device eth5 entered promiscuous mode
 +
 +br-lan: port 7(eth5) entered forwarding state
 +
 +ubi1 error: ubi_open_volume: cannot open device 1, volume 0, error -16
 +
 +br-lan: port 7(eth5) entered forwarding state
 +
 +dhd_prot_ioctl: status ret value is -29 
 +
 +wfd_registerdevice Device already registered for wfd_idx 0 ifidx 0
 +
 +wfd_registerdevice Successfully registered dev wl0.1 ifidx 0 wfd_idx 0
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +dhd_wmf_igs_broadcast: WMF: send failure
 +
 +IGMP Query send failed
 +
 +Register interface [wl0.1]  MAC: ac:84:c6:2d:c0:36
 +
 +
 +dhd_prot_ioctl: status ret value is -4 
 +
 +dhd_prot_ioctl: status ret value is -13 
 +
 +dhd_prot_ioctl: status ret value is -13 
 +
 +dhd_prot_ioctl: status ret value is -20 
 +
 +dhd_prot_ioctl: status ret value is -2 
 +
 +dhd_prot_ioctl: status ret value is -2 
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +CONSOLE: 026740.432 wl0: wl_open
 +
 +CONSOLE: 026740.433 wlc_ucode_download: wl0: Loading non-MU ucode
 +
 +dhd_set_mac_addr_handler: MACID is overwritten
 +
 +CONSOLE: 026740.434 wl0: CORE INIT : nfifo 32 mu_tx_enab 0
 +
 +device wl0.1 entered promiscuous mode
 +
 +CONSOLE: 026740.434 wl0: CORE INIT : mode 2 pktclassify 1 rxsplit 0  hdr conve 0 DMA_CT Enabled
 +
 +br-lan: port 8(wl0.1) entered forwarding state
 +
 +br-lan: port 8(wl0.1) entered forwarding state
 +
 +CONSOLE: 026740.449 reclaim section postattach: Returned 103120 bytes to the heap
 +
 +CONSOLE: 026740.450 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026740.450 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026740.508 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026740.524 wl0: invalid chanspec 0x1000
 +
 +CONSOLE: 026740.539 wl0: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512
 +
 +CONSOLE: 026740.550 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026740.557 wl0: wl_open
 +
 +CONSOLE: 026740.558 wlc_ucode_download: wl0: Loading MU ucode
 +
 +CONSOLE: 026740.559 wl0: CORE INIT : nfifo 32 mu_tx_enab 1
 +
 +CONSOLE: 026740.559 wl0: CORE INIT : mode 2 pktclassify 1 rxsplit 0  hdr conve 0 DMA_CT Enabled
 +
 +CONSOLE: 026740.572 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026740.572 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026742.576 bcm_pack_xtlv_entry: no space tlv_buf: requested:28, available:12
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 258 for peer 01:00:5e:00:00:01 prio 3 ifindex 1
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +CONSOLE: 026743.501 wl0: link up (wl0)
 +
 +CONSOLE: 026743.503 wl0: link up (wl0.1)
 +
 +CONSOLE: 026743.513 pciedev_send_ltr:Giving up:0x302
 +
 +monitor task is initialized pid= 7000 
 +
 +=====>>>>> wireless setting is finished
 +usbshare boot start
 +usbshare boot end
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +tfs_stats.c(309)-tfs_stats_set_interval:Set interval:1 failed!tfs_data.c(235)-tfs_data_clean_entries:clean cmd: rm /tmp/tfs//*
 +tfs_stats.c(416)-tfs_stats_init:Delete all stats failed!USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +General shell run!
 +CONSOLE: 026744.730 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026744.730 flow_create : bitmap_size=512  maxitems=512
 +
 +USB port event happened -- port=
 +USB port event happened -- port=
 +sysctl (7547): drop_caches: 3
 +
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +tfs_stats.c(344)-tfs_stats_get_all:Get stats failed!tfs_ubus.c(434)-tfs_ubus_timeout_proc:Ubus get stats failed!USB port event happened -- port=
 +USB port event happened -- port=
 +[switch] switch port eth0 <0 3> phymode is set to 0
 +[switch] SETUP port (0) media-type: 1000 full on!
 +[switch] switch ports is linked up!
 +CONSOLE: 026750.747 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026750.748 wl0.0: wlc_send_bar: seq 0x1 tid 0
 +
 +CONSOLE: 026751.296 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026751.297 wl0.0: wlc_send_bar: seq 0x1 tid 6
 +
 +br-lan: port 5(eth6) entered forwarding state
 +
 +br-lan: port 6(wl1.1) entered forwarding state
 +
 +br-lan: port 7(eth5) entered forwarding state
 +
 +br-lan: port 8(wl0.1) entered forwarding state
 +
 +CONSOLE: 026755.796 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026755.980 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026756.573 wl0.0: wlc_send_bar: seq 0x3 tid 0
 +
 +CONSOLE: 026756.660 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026756.661 wl0.0: wlc_send_bar: seq 0x1 tid 0
 +
 +CONSOLE: 026756.899 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026756.900 wl0.0: wlc_send_bar: seq 0x1 tid 6
 +
 +dhd_flow_rings_delete_for_peer: ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 68 for peer 40:b3:95:83:ba:49 prio 3 ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 196 for peer 40:b3:95:83:ba:49 prio 0 ifindex 0
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +CONSOLE: 026769.775 wl0: Proxy STA 40:b3:95:83:ba:49 link is already gone !!??
 +
 +br-lan: received packet on eth5 with own address as source address
 +
 +CONSOLE: 026777.472 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026777.473 wl0.0: wlc_send_bar: seq 0x1 tid 0
 +
 +CONSOLE: 026777.572 wl0: STA 90:61:ae:fa:19:9b selected as MU client at index 0.
 +
 +CONSOLE: 026777.572 wl0: STA 00:08:f0:14:fb:8d selected as MU client at index 1.
 +
 +CONSOLE: 026777.826 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026777.827 wl0.0: wlc_send_bar: seq 0x1 tid 6
 +
 +CONSOLE: 026778.228 wl0.0: wlc_send_bar: seq 0x17 tid 0
 +
 +CONSOLE: 026781.480 wl0.0: wlc_send_bar: seq 0x18 tid 0
 +
 +dhd_flow_rings_delete_for_peer: ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 68 for peer 90:61:ae:fa:19:9b prio 3 ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 196 for peer 90:61:ae:fa:19:9b prio 0 ifindex 0
 +
 +dhd_flow_rings_delete_for_peer: ifindex 0
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +CONSOLE: 026790.562 wl0: STA 90:61:ae:fa:19:9b removed from MU client set.
 +
 +CONSOLE: 026790.572 wl0: STA 00:08:f0:14:fb:8d removed from MU client set.
 +
 +debug.zy Kernel Send MSG_NETLINK_BRCM_LED_SWITCH_PRESSED To IPF Center.
 +
 +usb 3-1: new high-speed USB device number 2 using ehci-platform
 +
 +usb-storage 3-1:1.0: USB Mass Storage device detected
 +
 +hotplug detected product:  951/1653/1scsi host0: usb-storage 3-1:1.0
 +
 +00
 +hotplug detected product:  951/1653/100
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=1
 +USB port event happened -- port=1
 +scsi 0:0:0:0: Direct-Access     Kingston DT 100 G2        PMAP PQ: 0 ANSI: 0 CCS
 +
 +sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
 +
 +sd 0:0:0:0: [sda] Write Protect is off
 +
 +sd 0:0:0:0: [sda] No Caching mode page found
 +
 +sd 0:0:0:0: [sda] Assuming drive cache: write through
 +
 + sda: sda1
 +
 +sd 0:0:0:0: [sda] Attached SCSI removable disk
 +
 +tntfs info (device sda, pid 10043): ntfs_fill_super(): fail_safe is enabled.
 +
 +tfat: fail_safe is enabled
 +
 +[EXFAT] trying to mount...
 +
 +FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
 +
 +tntfs info (device sda1, pid 10188): ntfs_fill_super(): fail_safe is enabled.
 +
 +tntfs info (device sda1, pid 10188): load_system_files(): NTFS volume name 'king', version 3.1 (cluster_size 4096, PAGE_SIZE 4096).
 +
 +
 +
 +
 +BusyBox v1.19.4 (2017-09-19 21:34:17 CST) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +
 +     MM           NM                    MMMMMMM          M       M
 +   $MMMMM        MMMMM                MMMMMMMMMMM      MMM     MMM
 +  MMMMMMMM     MM MMMMM.              MMMMM:MMMMMM:   MMMM   MMMMM
 +MMMM= MMMMMM  MMM   MMMM       MMMMM   MMMM  MMMMMM   MMMM  MMMMM'
 +MMMM=  MMMMM MMMM    MM       MMMMM    MMMM    MMMM   MMMMNMMMMM
 +MMMM=   MMMM  MMMMM          MMMMM     MMMM    MMMM   MMMMMMMM
 +MMMM=   MMMM   MMMMMM       MMMMM      MMMM    MMMM   MMMMMMMMM
 +MMMM=   MMMM     MMMMM,    NMMMMMMMM   MMMM    MMMM   MMMMMMMMMMM
 +MMMM=   MMMM      MMMMMM   MMMMMMMM    MMMM    MMMM   MMMM  MMMMMM
 +MMMM=   MMMM   MM    MMMM    MMMM      MMMM    MMMM   MMMM    MMMM
 +MMMM$ ,MMMMM  MMMMM  MMMM    MMM       MMMM   MMMMM   MMMM    MMMM
 +  MMMMMMM:      MMMMMMM             MMMMMMMMMMMM  MMMMMMM MMMMMMM
 +    MMMMMM       MMMMN               MMMMMMMMM      MMMM    MMMM
 +     MMMM          M                    MMMMMMM        M       M
 +       M
 + ---------------------------------------------------------------
 +   For those about to rock... (Attitude Adjustment, unknown)
 + ---------------------------------------------------------------
 +root@AC2300:/#
 +</nowiki>
 +</WRAP>
 +
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>BCM4906 2core dualcore ARMv8 GigabitEthernet 4Port BCM4365E BCM4360 802.11n 802.11bg 802.11bgn 802.11abgn 802.11ac 3Ant 128Flash 512RAM USB2.0 USB3.0 archerc2300}}+{{tag>BCM4906 2core ARMv8 GigabitEthernet 4Port BCM4365E BCM4360 802.11n 802.11bg 802.11bgn 802.11abgn 802.11ac 3Ant 128Flash 512RAM USB2.0 USB3.0 unsupported}}
  • Last modified: 2021/02/07 22:48
  • by dsouza