Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:tp-link:tp-link_archer_c2300_v1 [2018/11/01 20:12] – [Tags] antossinbox:toh:tp-link:tp-link_archer_c2300_v1 [2019/08/04 20:47] – link to forum + wikidevi added tmomas
Line 6: Line 6:
  
  
-===== Hardware Highlights ===== +===== OpenWrt support ===== 
----- datatable ---+ 
-cols    Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ +<color red>**Not supported.**</color> 
-header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB + 
-align   : c,c,c,c,c,c,c,c,c,c,c,c + 
-filter  : Brand=TP-Link +===== Supporting activities ===== 
-filter  : Model=Archer C2300 +//Describe if there are any ongoing activities that might lead to OpenWrt support.// 
-filter  Versions~v1.0+ 
 +  * OpenWrt forum thread: [[https://forum.openwrt.org/t/support-for-tp-link-archer-c2300/24957]] 
 + 
 + 
 +/*** if info availableuncomment and fill in 
 +===== Experimental firmware ===== 
 + 
 +//List experimental firmware download links here.// 
 + 
 +//None at this time.// 
 + 
 +  * External image (add link) 
 +  * trunk image (add link) 
 +  * ... 
 +***/ 
 + 
 + 
 +===== Hardware highlights ===== 
 +  * [[https://wikidevi.com/wiki/TP-LINK_Archer_C2300_v1.x]] 
 + 
 +CPU                        ^ Ram      ^ Flash   ^ Network     WLAN   ^ USB      ^ Serial   ^ JTag   ^ 
 +| Broadcom BCM4906 @ 1,8 GHz    512 MiB  |  128 MiB  |  5x Gbit  |  abgnac    1x 2.01x3.0    ?    |   ?    | 
 + 
 +===== Bootlogs ===== 
 + 
 +==== OEM bootlog ==== 
 +(sourcehttps://github.com/acc-/tplink-archer-c2300/wiki/Boot-logs by Adam acc-) 
 + 
 +<WRAP bootlog> 
 +<nowiki>
 ---- ----
 +BTRM
 +V1.6
 +CPU0
 +L1CD
 +MMUI
 +MMU7
 +DATA
 +ZBBS
 +MAIN
 +OTP?
 +OTPP
 +USBT
 +NAND
 +IMG?
 +IMGL
 +UHD?
 +UHDP
 +RLO?
 +RLOP
 +UBI?
 +UBIP
 +PASS
 +----
 +HELO
 +5.0202HNDrc7-1.0.38-161.122
 +
 +CPU0
 +L1CD
 +MMUI
 +MMU>
 +CODE
 +ZBBS
 +MAIN
 +NVRAM memcfg 0x1427
 +
 +MCB chksum 0xa89ec7d9, config 0x1427
 +
 +
 +MemsysInit lpf0_generic_aarch64 1.3.0.1 20150910
 +
 +DDR3
 +
 +900017E8 80018000 8001A000 00000000 00000000 0050371A
 +
 +MCB rev=0x00040301 Ref ID=0x0371A Sub Bld=0x005
 +
 +Dram Timing 11-11-11
 +
 +
 +DDR3-1600 CL11 total 512MB 1 16bits part[s] %1 SSC
 +
 +
 +Add/Ctl Alignment
 +no adjustment
 +
 +
 +ZQ Cal LP PHY
 +
 + R in Ohm
 +
 + P: Finger=0x2D0 Term=0x78 Drv=0x2A
 +
 + N: Finger=0x2D0 Term=0x78 Drv=0x2A
 +
 +
 +PLL Ref(Hz)=0x02FAF080 UI STEPS=0x039
 +
 + DDR CLK(MHz)=0x31B WL CLK dly(ps)=0x0C8 bitT(ps)=0x274 VDLsize(fs)=0x2B09 CLK_VDL=0x01A
 +
 +
 +SHMOO 28nm
 +8001A000 80018800 00000000 00020000 00000000
 +
 +
 +Shmoo WL
 +
 +
 +One UI Steps : 0x44
 +
 +
 +auto-clk result = 00B (filter=0C steps)
 +initial CLK shift = 01A
 +final CLK shift   = 00B
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 S----------------X++++++++++++++++++++++++++++++++++++++++++++++++++
 +
 +01 S----------------X++++++++++++++++++++++++++++++++++++++++++++++++++
 +
 +
 +Shmoo RD En
 +
 +FORCED WR ODT = 0x18001800
 +
 + DQSN DRIVE PAD CONTROL (from) (to)
 +
 + B0 00031A31 00079A31
 +
 + B1 00031A31 00079A31
 +
 +B0 RISE UI=1 VDL=17 PICK UI=2 VDL=17
 +
 +B1 RISE UI=1 VDL=15 PICK UI=2 VDL=15
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 --S--------------------X++++++++++++++++++++++++++++++++++++++++++++
 +
 +01 --S------------------X++++++++++++++++++++++++++++++++++++++++++++++
 +
 +
 +Shmoo RD DQ NP
 +
 +DQS :
 +
 +B0 VDL=39 ok
 +
 +B1 VDL=39 ok
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------------
 +
 +01 -------+++++++++++++++++++++++X+++++++++++++++++++++++--------------
 +
 +02 ---++++++++++++++++++++++++X++++++++++++++++++++++++----------------
 +
 +03 ---------++++++++++++++++++++++++X++++++++++++++++++++++++----------
 +
 +04 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +05 --------++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +06 ---++++++++++++++++++++++++X+++++++++++++++++++++++++---------------
 +
 +07 ----------++++++++++++++++++++++++X+++++++++++++++++++++++++--------
 +
 +08 -------+++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +09 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +10 --------+++++++++++++++++++++++X+++++++++++++++++++++++-------------
 +
 +11 ----++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +12 ---------++++++++++++++++++++++++X++++++++++++++++++++++++----------
 +
 +13 ------++++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +14 -------++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 +
 +15 --------++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 +
 +
 +Shmoo RD DQ P
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 +++++++++++++++++++++++++X++++++++++++++++++++++++++----------------
 +
 +01 -----++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 +
 +02 +++++++++++++++++++++++++X++++++++++++++++++++++++++----------------
 +
 +03 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 +
 +04 --++++++++++++++++++++++++++X++++++++++++++++++++++++++-------------
 +
 +05 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 +
 +06 ++++++++++++++++++++++++++X++++++++++++++++++++++++++---------------
 +
 +07 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++--------
 +
 +08 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +09 --+++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +10 ------++++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +11 --+++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +12 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 +
 +13 --++++++++++++++++++++++++++X++++++++++++++++++++++++++-------------
 +
 +14 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 +
 +15 -----+++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 +
 +
 +Shmoo RD DQ N
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------------
 +
 +01 -------+++++++++++++++++++++++X++++++++++++++++++++++++-------------
 +
 +02 ---++++++++++++++++++++++++X++++++++++++++++++++++++----------------
 +
 +03 ---------++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 +
 +04 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +05 --------++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +06 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +07 ----------++++++++++++++++++++++++X+++++++++++++++++++++++++--------
 +
 +08 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +09 ----+++++++++++++++++++++++++X++++++++++++++++++++++++++------------
 +
 +10 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +11 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 +
 +12 ---------++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 +
 +13 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 +
 +14 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 +
 +15 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 +
 +
 +RD DQS adjustments :
 +BL0: Start: 0x39 Final: 0x39
 +
 +BL1: Start: 0x39 Final: 0x39
 +
 +
 +Shmoo WR DQ
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 -++++++++++++++++++++++++X++++++++++++++++++++++++------------------
 +
 +01 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +02 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------------
 +
 +03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +04 --+++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +05 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +06 -++++++++++++++++++++++++X+++++++++++++++++++++++++-----------------
 +
 +07 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 +
 +08 ----++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
 +
 +09 --++++++++++++++++++++++++X+++++++++++++++++++++++++----------------
 +
 +10 ------+++++++++++++++++++++++X++++++++++++++++++++++++--------------
 +
 +11 -++++++++++++++++++++++++++X++++++++++++++++++++++++++--------------
 +
 +12 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +13 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
 +
 +14 ----+++++++++++++++++++++++++X++++++++++++++++++++++++++------------
 +
 +15 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 +
 +
 +Shmoo WR DM
 +
 +WR DM
 +
 +   00000000001111111111222222222233333333334444444444555555555566666666
 +
 +   01234567890123456789012345678901234567890123456789012345678901234567
 +
 +00 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
 +
 +01 --+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----------
 +
 +DDR test done successfully
 +
 +
 +FPS0
 +----
 +PAR0
 +J000
 +JFFS
 +BT00
 +0008
 +----
 +PAR1
 +NONE
 +NAN9
 +----
 +TRY0
 +NAN3
 +JFS2
 +RFS1
 +JFFS
 +JFS2
 +NAN5
 +
 +
 +Base: 5.2_02HNDrc7
 +CFE version 1.0.38-161.122 for BCM94908 (64bit,SP,LE)
 +Build Date: Wed Sep 20 08:36:53 CST 2017 (rock@rock-computer)
 +Copyright (C) 2000-2015 Broadcom Corporation.
 +
 +Boot Strap Register:  0x6fc42
 +Chip ID: BCM4906_A0, Broadcom B53 Quad Core: 1800MHz
 +Total Memory: 536870912 bytes (512MB)
 +NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
 +NAND flash device: MXIC MX30LF1G08AA, id 0xc2f1 block 128KB size 131072KB
 +pmc_init:PMC using DQM mode
 +pmc_init:7 0 fe540465 351034b
 +Board IP address                  : 192.168.1.1:ffffff00  
 +Host IP address                   : 192.168.1.100  
 +Gateway IP address                :   
 +Run from flash/host/tftp (f/h/c)  : f  
 +Default host run file name        : vmlinux  
 +Default host flash file name      : bcm963xx_fs_kernel  
 +Boot delay (0-9 seconds)          : 1  
 +Default host ramdisk file name    :   
 +Default ramdisk store address     :   
 +Default DTB file name             :   
 +Board Id                          : 94908REF  
 +Number of MAC Addresses (1-64)    : 11  
 +Base MAC Address                  : 02:10:18:01:00:01  
 +PSI Size (1-128) KBytes           : 48  
 +Enable Backup PSI [0|1]           : 0  
 +System Log Size (0-256) KBytes    : 0  
 +Auxillary File System Size Percent: 0  
 +flow memory allocation (MB)       : 14  
 +buffer memory allocation (MB)     : 32  
 +DHD 0 memory allocation (MB)      : 0  
 +DHD 1 memory allocation (MB)      : 0  
 +DHD 2 memory allocation (MB)      : 0  
 +WLan Feature                      : 0x00  
 +Partition 1 Size (MB)             : 0M  
 +Partition 2 Size (MB)             : 8M  
 +Partition 3 Size (MB)             : 0M  
 +Partition 4 Size (MB) (Data)      : 4M 
 +
 +Initalizing switch low level hardware.
 +Software Resetting Switch ... Done.
 +Waiting MAC port Rx/Tx to be enabled by hardware ...Done
 +Disable Switch All MAC port Rx/Tx
 +*** Press any key to stop auto run (1 seconds) ***
 +Auto run second count down: 110
 +Booting from only image (address 0x00100000, flash offset 0x00100000) ...
 +Decompression LZMA Image OK!
 +Entry at 0x0000000000080000
 +Starting program at 0x0000000000080000
 +/memory = 0x20000000
 +debug.zy dhd param1 value 0xe 
 +debug.zy dhd param2 value 0x0 
 +debug.zy dhd param3 value 0x0 
 +Booting Linux on physical CPU 0x0
 +
 +Linux version 4.1.27 (rock@rock-computer) (gcc version 5.3.0 (Buildroot 2016.02) ) #35 SMP PREEMPT Tue Nov 21 10:30:24 CST 2017
 +
 +CPU: AArch64 Processor [420f1000] revision 0
 +
 +Detected VIPT I-cache on CPU0
 +
 +alternatives: enabling workaround for ARM erratum 845719
 +
 +PERCPU: Embedded 16 pages/cpu @ffffffc01ffd4000 s25216 r8192 d32128 u65536
 +
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122112
 +
 +Kernel command line: console=ttyS0,115200 init=/etc/preinit irqaffinity=0 coherent_pool=1M
 +
 +PID hash table entries: 2048 (order: 2, 16384 bytes)
 +
 +Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
 +
 +Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
 +
 +Memory: 439988K/495616K available (4879K kernel code, 277K rwdata, 1648K rodata, 228K init, 430K bss, 55628K reserved, 0K cma-reserved)
 +
 +Virtual kernel memory layout:
 +
 +    vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000     247 GB)
 +
 +    vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000       7 GB maximum)
 +
 +              0xffffffbe00000000 - 0xffffffbe00700000       7 MB actual)
 +
 +    fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000      12 KB)
 +
 +    PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000      16 MB)
 +
 +    modules : 0xffffffbffc000000 - 0xffffffc000000000      64 MB)
 +
 +    memory  : 0xffffffc000000000 - 0xffffffc020000000     512 MB)
 +
 +      .init : 0xffffffc0006e1000 - 0xffffffc00071a000     228 KB)
 +
 +      .text : 0xffffffc000080000 - 0xffffffc0006e0574    6530 KB)
 +
 +      .data : 0xffffffc00071b000 - 0xffffffc0007605a0     278 KB)
 +
 +Preemptible hierarchical RCU implementation.
 +
 + RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 +
 +RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
 +
 +NR_IRQS:64 nr_irqs:64 0
 +
 +Architected cp15 timer(s) running at 50.00MHz (phys).
 +
 +clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
 +
 +sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
 +
 +BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here
 +
 +     Remapping interrupts...
 +
 +             hwirq      virq
 +
 +               61         5
 +
 +               64         6
 +
 +               66         7
 +
 +               91         8
 +
 +               92         9
 +
 +               93        10
 +
 +               77        11
 +
 +               78        12
 +
 +               79        13
 +
 +               80        14
 +
 +               81        15
 +
 +               82        16
 +
 +               83        17
 +
 +               84        18
 +
 +               85        19
 +
 +               86        20
 +
 +               88        21
 +
 +               96        22
 +
 +               97        23
 +
 +               98        24
 +
 +               99        25
 +
 +              118        26
 +
 +              119        27
 +
 +              106        28
 +
 +              104        29
 +
 +              105        30
 +
 +               76        31
 +
 +              120        32
 +
 +              110        33
 +
 +              148        34
 +
 +              154        35
 +
 +              155        36
 +
 +              156        37
 +
 +              157        38
 +
 +              158        39
 +
 +              159        40
 +
 +               69        41
 +
 +     Remapping IO memories...
 +
 +             phys              virt          size
 +
 +       00000000ff800000  ffffff8000008000  00003000
 +
 +       00000000ff858000  ffffff8000002000  00001000
 +
 +       00000000ff85a000  ffffff800000c000  00001000
 +
 +       00000000ffe00000  ffffff8000040000  00020000
 +
 +       0000000080002000  ffffff800000e000  00001000
 +
 +       0000000080018000  ffffff8000010000  00004000
 +
 +       0000000080200000  ffffff8000018000  00005000
 +
 +       0000000080280000  ffffff8000016000  00001000
 +
 +       0000000082200000  ffffff8000080000  00100000
 +
 +       0000000080080000  ffffff8000200000  00050000
 +
 +       0000000080008000  ffffff8000020000  00003fff
 +
 +       000000008000c000  ffffff8000028000  00003fff
 +
 +       0000000081060000  ffffff8000030000  00004000
 +
 +       0000000080100000  ffffff8000038000  00002000
 +
 +       0000000080010000  ffffff800001e000  00001000
 +
 +       000000008001d000  ffffff800003c000  00001010
 +
 +       000000008001c000  ffffff8000026000  00000448
 +
 +console [ttyS0] enabled
 +
 +Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
 +
 +pid_max: default: 32768 minimum: 301
 +
 +Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +
 +Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +
 +--Kernel Config--
 +
 +  SMP=1
 +
 +  PREEMPT=1
 +
 +  DEBUG_SPINLOCK=0
 +
 +  DEBUG_MUTEXES=0
 +
 +Broadcom Logger v0.1
 +
 +creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd0
 +
 +Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
 +
 +creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flow
 +
 +pmc_init:PMC using DQM mode
 +
 +CPU1: Booted secondary processor
 +
 +Detected VIPT I-cache on CPU1
 +
 +Brought up 2 CPUs
 +
 +SMP: Total of 2 processors activated.
 +
 +CPU: All CPU(s) started at EL2
 +
 +alternatives: patching kernel code
 +
 +clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 +
 +NET: Registered protocol family 16
 +
 +cpuidle: using governor ladder
 +
 +cpuidle: using governor menu
 +
 +vdso: 2 pages (1 code @ ffffffc000721000, 1 data @ ffffffc000720000)
 +
 +DMA: preallocated 1024 KiB pool for atomic allocations
 +
 +ACPI: Interpreter disabled.
 +
 +SCSI subsystem initialized
 +
 +usbcore: registered new interface driver usbfs
 +
 +usbcore: registered new interface driver hub
 +
 +usbcore: registered new device driver usb
 +
 +bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
 +
 +skbFreeTask created successfully
 +
 +gbpm_do_work scheduled
 +
 +[0;34mBLOG v3.0 Initialized[0m
 +
 +BLOG Rule v1.0 Initialized
 +
 +Broadcom IQoS v0.1 initialized
 +
 +Broadcom GBPM v0.1 initialized
 +
 +Switched to clocksource arch_sys_counter
 +
 +pnp: PnP ACPI: disabled
 +
 +NET: Registered protocol family 2
 +
 +TCP established hash table entries: 4096 (order: 3, 32768 bytes)
 +
 +TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
 +
 +TCP: Hash tables configured (established 4096 bind 4096)
 +
 +UDP hash table entries: 256 (order: 1, 8192 bytes)
 +
 +UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
 +
 +NET: Registered protocol family 1
 +
 +futex hash table entries: 512 (order: 3, 32768 bytes)
 +
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +
 +exFAT: Version 1.2.9
 +
 +ntfs: driver 2.1.32 [Flags: R/O].
 +
 +jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
 +
 +io scheduler noop registered (default)
 +
 +brd: module loaded
 +
 +loop: module loaded
 +
 +nand: Could not find valid ONFI parameter page; aborting
 +
 +nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
 +
 +nand: Macronix NAND 128MiB 3,3V 8-bit
 +
 +nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
 +
 +bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x65324458 timing_2 to 0x80040e54
 +
 +bcm63xx_nand ff801800.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
 +
 +Bad block table found at page 65472, version 0x01
 +
 +Bad block table found at page 65408, version 0x01
 +
 +>>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<
 +
 +Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and vmlinux filesystem
 +
 +Creating 9 MTD partitions on "brcmnand.0":
 +
 +0x000000460000-0x000003a00000 : "rootfs"
 +
 +0x000003a00000-0x000007300000 : "rootfs_update"
 +
 +0x000007b00000-0x000007f00000 : "data"
 +
 +0x000000000000-0x000000100000 : "nvram"
 +
 +0x000000100000-0x000003a00000 : "image"
 +
 +0x000003a00000-0x000007300000 : "image_update"
 +
 +0x000000100000-0x000000460000 : "bootfs"
 +
 +0x000000000000-0x000008000000 : "dummy2"
 +
 +0x000007300000-0x000007b00000 : "misc2"
 +
 +PPP generic driver version 2.4.2
 +
 +PPP BSD Compression module registered
 +
 +PPP Deflate Compression module registered
 +
 +i2c /dev entries driver
 +
 +brcmboard registered
 +
 +brcmboard: brcm_board_init entry
 +
 +print_rst_status: Last RESET due to POR reset
 +
 +print_rst_status: RESET reason: 0x00000000
 +
 +set_ext_irq_info ERROR: Invalid index entry 255 max is 6   ext_irq 255 BP_EXT_INTR_FLAGS_MASK 0x8000e000 BP_EXT_INTR_0 0x0
 +
 +set_ext_irq_info ERROR: Invalid index entry 255 max is 6   ext_irq 255 BP_EXT_INTR_FLAGS_MASK 0x8000e000 BP_EXT_INTR_0 0x0
 +
 +set_ext_irq_info ERROR: Invalid index entry 255 max is 6   ext_irq 255 BP_EXT_INTR_FLAGS_MASK 0x8000e000 BP_EXT_INTR_0 0x0
 +
 +GPIO: Reset Button Polling is enabled on gpio 8017
 +
 +GPIO: Led Button Polling is enabled on gpio 8012
 +
 +GPIO: Wifi Button Polling is enabled on gpio 8016
 +
 +SES: Button Polling is enabled on gpio 8015
 +
 +SES: LED GPIO 0x400c is enabled
 +
 +DYING GASP IRQ Initialized and Enabled
 +
 +map_hw_timer_interrupt,132: interrupt_id 22
 +
 +map_hw_timer_interrupt,132: interrupt_id 23
 +
 +map_hw_timer_interrupt,132: interrupt_id 24
 +
 +map_hw_timer_interrupt,132: interrupt_id 25
 +
 +Serial: BCM63XX driver $Revision: 3.00 $
 +
 +[0;33mMagic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands)[0m
 +
 +ttyS0 at MMIO 0xff800640 (irq = 6, base_baud = 921600) is a BCM63XX
 +
 +BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=35951, buf size=2240
 +
 +Broadcom BPM Module Char Driver v0.1 Registered<3004>[0m
 +
 +PCIe HCD (impl1)
 +
 +  bcm963xx-pcie: found core [0] Rev [ 3. 4]
 +
 +bcm963xx-pcie bcm963xx-pcie.0: PCI host bridge to bus 0000:00
 +
 +pci_bus 0000:00: root bus resource [mem 0xc0000000-0xcfffffff]
 +
 +pci_bus 0000:00: root bus resource [bus 00-ff]
 +
 +pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +
 +pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc0bfffff]
 +
 +pci 0000:00:00.0: BAR 9: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
 +
 +pci 0000:01:00.0: BAR 2: assigned [mem 0xc0000000-0xc07fffff 64bit]
 +
 +pci 0000:01:00.0: BAR 4: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
 +
 +pci 0000:01:00.0: BAR 0: assigned [mem 0xc0800000-0xc0807fff 64bit]
 +
 +pci 0000:00:00.0: PCI bridge to [bus 01]
 +
 +pci 0000:00:00.0:   bridge window [mem 0xc0000000-0xc0bfffff]
 +
 +pci 0000:00:00.0:   bridge window [mem 0xc0c00000-0xc0cfffff 64bit pref]
 +
 +pcieport 0000:00:00.0: enabling device (0000 -> 0002)
 +
 +pcieport 0000:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +pci 0000:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +  bcm963xx-pcie: found core [1] Rev [ 3. 4]
 +
 +bcm963xx-pcie bcm963xx-pcie.1: PCI host bridge to bus 0001:00
 +
 +pci_bus 0001:00: root bus resource [mem 0xd0000000-0xdfffffff]
 +
 +pci_bus 0001:00: root bus resource [bus 00-ff]
 +
 +pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +
 +pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
 +
 +pci 0001:00:00.0: BAR 8: assigned [mem 0xd0000000-0xd00fffff]
 +
 +pci 0001:01:00.0: BAR 0: assigned [mem 0xd0000000-0xd0007fff 64bit]
 +
 +pci 0001:00:00.0: PCI bridge to [bus 01]
 +
 +pci 0001:00:00.0:   bridge window [mem 0xd0000000-0xd00fffff]
 +
 +pcieport 0001:00:00.0: enabling device (0000 -> 0002)
 +
 +pcieport 0001:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +pci 0001:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
 +
 +  bcm963xx-pcie: found core [2] Rev [ 3. 4]
 +
 +  bcm963xx-pcie: failed to bring up core [2] link
 +
 +GACT probability NOT on
 +
 +u32 classifier
 +
 +    input device check on
 +
 +    Actions configured
 +
 +Netfilter messages via NETLINK v0.30.
 +
 +xt_time: kernel timezone is -0000
 +
 +Initializing XFRM netlink socket
 +
 +NET: Registered protocol family 10
 +
 +NET: Registered protocol family 17
 +
 +NET: Registered protocol family 15
 +
 +bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
 +
 +Ebtables v2.0 registered
 +
 +ebt_time registered
 +
 +ebt_ftos registered
 +
 +ebt_wmm_mark registered
 +
 +L2TP core: blog_l2tp_rcv_check 
 +
 +l2tp_core: L2TP core driver, V2.0
 +
 +l2tp_ip: L2TP IP encapsulation support (L2TPv3)
 +
 +l2tp_netlink: L2TP netlink interface
 +
 +l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
 +
 +l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
 +
 +8021q: 802.1Q VLAN Support v1.8
 +
 +ubi0: attaching mtd0
 +
 +ubi0: scanning is finished
 +
 +ubi0: attached mtd0 (name "rootfs", size 53 MiB)
 +
 +ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
 +
 +ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
 +
 +ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
 +
 +ubi0: good PEBs: 429, bad PEBs: 0, corrupted PEBs: 0
 +
 +ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
 +
 +ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
 +
 +ubi0: available PEBs: 0, total reserved PEBs: 429, PEBs reserved for bad PEB handling: 9
 +
 +ubi0: background thread "ubi_bgt0d" started, PID 362
 +
 +UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
 +
 +UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
 +
 +UBIFS (ubi0:0): FS size: 51425280 bytes (49 MiB, 405 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
 +
 +UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
 +
 +UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID BA898232-0BAE-4944-879B-1171735B9C1C, small LPT model
 +
 +VFS: Mounted root (ubifs filesystem) readonly on device 0:11.
 +
 +Freeing unused kernel memory: 228K (ffffffc0006e1000 - ffffffc00071a000)
 +
 +mknod: /dev/flash_chrdev: Read-only file system
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +request_module: runaway loop modprobe net-pf-16-proto-31
 +
 +Mounting filesystems...
 +>>>>> Starting mdev <<<<<
 +>>>>> Creating static device nodes <<<<<
 +>>>>> Mounting /data partition <<<<<
 +>>>>> Mounting data partition as JFFS2 <<<<<
 +wlcsm: module license 'Proprietary' taints kernel.
 +
 +Disabling lock debugging due to kernel taint
 +
 +Initializing WLCSM Module
 +
 +WLCSM Module loaded successfully 
 +
 +*** CHECK: NVRAM file checking... ***
 +*** CHECK: NVRAM file is ok... ***
 +restore done!
 +
 +[TPDATA]: Found misc2 partition on MTD devide 8, attach ubi1: attaching mtd8
 +
 +it.
 +ubi1: scanning is finished
 +
 +ubi1: attached mtd8 (name "misc2", size 8 MiB)
 +
 +ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
 +
 +ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
 +
 +ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
 +
 +ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
 +
 +ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
 +
 +ubi1: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 624428756
 +
 +ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
 +
 +ubi1: background thread "ubi_bgt1d" started, PID 805
 +
 +[TPDATA]: MTD8 attach succ.
 +[TPDATA]: Mounting tp_data UBI volume as UBIFS
 +UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 820
 +
 +UBIFS (ubi1:0): recovery needed
 +
 +UBIFS (ubi1:0): recovery completed
 +
 +UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "tp_data"
 +
 +UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
 +
 +UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
 +
 +UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
 +
 +UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 94BF99E9-2A3E-435D-BF34-DEDCCE3CF54E, small LPT model
 +
 +[TPDATA]: Mount tp_data Done.
 +[product-info]: Check product-info...
 +[product-info]: Done
 +>>>>> Creating static device nodes <<<<<
 +FPM will initialize 2 pool[s] and require 32 MB
 +
 +bcm-fpm: FPM with 2 pool(s)
 +
 +bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000
 +
 +fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d200000
 +
 +Scratch pad is not initialized.
 +
 +RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000
 +
 +configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64
 +
 +++++Runner gso_desc_pool created successfully
 +
 +rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000
 +
 +FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80004de000
 +
 +
 + RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>
 +
 +brcmchipinfo: brcm_chipinfo_init entry
 +
 +NBUFF v1.0 Initialized
 +
 +[0;36;44mInitialized fcache state[0m
 +
 +[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<3002>[0m
 +
 +Created Proc FS /procfs/fcache
 +
 +[0;36;44mBroadcom Packet Flow Cache registered with netdev chain[0m
 +
 +[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.[0m
 +
 +[0;35m[FHW]  pktDbgLvl[0xffffffbffc2a6588]=0[0m
 +
 +[0;34m[FHW]  fhw_construct: [0m
 +
 +[0;36;44mInitialized Fcache HW accelerator layer state[0m
 +
 +flwStatsThread created
 +
 +[0;36;44mConstructed Broadcom Packet Flow Cache v4.0[0m
 +
 +[1m[34mWifi Forwarding Driver is initialized![0m
 +
 +Loading HND Module
 +
 +hnd 281786 0 - Live 0xffffffbffc2ba000
 +emf 23790 0 - Live 0xffffffbffc30e000 (P)
 +igs 13356 0 - Live 0xffffffbffc318000 (P)
 +Tuxera FAT 12/16/32 driver version 3016.7.20 [Flags: R/W MODULE].
 +
 +Built against headers 4.1.27 #12 SMP PREEMPT Sat Dec 31 03:53:08 CST 2016 arm64
 +
 +Running on kernel 4.1.27 #35 SMP PREEMPT Tue Nov 21 10:30:24 CST 2017 aarch64
 +
 +Tuxera NTFS driver 3016.7.1.2.3 [Flags: R/W MODULE].
 +
 +Built against headers 4.1.27 #12 SMP PREEMPT Sat Dec 31 03:53:08 CST 2016 arm64
 +
 +Running on kernel 4.1.27 #35 SMP PREEMPT Tue Nov 21 10:30:24 CST 2017 aarch64
 +
 +Tuxera HFS+ driver 3016.6.21.3- preinit -
 +Press the [f] key and hit [enter] to enter failsafe mode
 +- regular preinit -
 +jffs2 not ready yet; using ramdisk
 +
 +
 +UBIFS error (pid: 1007): cannot open "ubi0:ubi_rootfs_data", error -19random: dd urandom read with 4 bits of entropy available
 +
 +jffs2 not ready yet; using ramdisk
 +- init -
 +
 +Please press Enter to activate this console. tun: Universal TUN/TAP device driver, 1.6
 +
 +tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 +
 +PPP MPPE Compression module registered
 +
 +sit: IPv6 over IPv4 tunneling driver
 +
 +gre: GRE over IPv4 demultiplexor driver
 +
 +ip_gre: GRE over IPv4 tunneling driver
 +
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +
 +NET: Registered protocol family 24
 +
 +nf_conntrack version 0.5.0 (3439 buckets, 13756 max)
 +
 +l2tp_ppp: PPPoL2TP kernel driver, V2.0
 +
 +PPTP driver version 0.8.5
 +
 +ip6_tables: (C) 2000-2006 Netfilter Core Team
 +
 +ctnetlink v0.93: registering with nfnetlink.
 +
 +fuse init (API version 7.23)
 +
 +-------------------------------------------------------------------------------------
 +reloadprofile() begin
 +reloadprofile() end
 +-------------------------------------------------------------------------------------
 +-------------------------------------------------------------------------------------
 +reloadconfig() begin
 +reloadconfig() end
 +===========  merge new config  ===============
 +===========  merge new config  end ===============
 +mergeconfigbycountry() begin
 +user has set country
 +mergeconfigbycountry() do nothing end
 +-------------------------------------------------------------------------------------
 +-------------------------------------------------------------------------------------
 +sh: iqos-db-parser: not found
 +-------------------------------------------------------------------------------------
 +-------------------------------------------------------------------------------------
 +openvpn cert does not exist
 +-------------------------------------------------------------------------------------
 +[reset factory] tp_restore_userconfig_partly_mark = 
 +gmtoff= 01:00
 +GMT-01:00
 +[switch] WAN ifs: "eth0"
 +[switch] LAN ifs: "eth1 eth2 eth3 eth4"
 +[switch] LAG1 ifs: "lag0_"
 +[switch] LAG1 map: "0x0"
 +[switch] LAG1 num: 0
 +BCM_RUNNER_ENET: LAG1 0x0, LAG2 0x0
 +
 +Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1
 +
 +Unused MUX Internal Port#0 connects to Crossbar External Port#0
 +
 +Cross Bar MUX Config : Internal Port 00 maps to External Port 00 <reg_val : 0x00000000>
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00000004>
 +
 +Broadcom BCM4906_A0 Ethernet Network Device v0.1
 +
 +dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 
 +
 +Scratch pad is not initialized.
 +
 +++++ disabling GSO on logical_port=3 dev=eth0
 +
 +eth0: <Int sw port: 3> <Logical : 03> MAC : 02:10:18:01:00:01
 +
 +    Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PHY >
 +
 +eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:02:10:18:01:00:01
 +
 +eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:02:10:18:01:00:01
 +
 +eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:02:10:18:01:00:01
 +
 +eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC:02:10:18:01:00:01
 +
 +NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ] 
 +
 +Ethernet Auto Power Down and Sleep: Enabled
 +
 +Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
 +
 +All Port Bit Map: 0x0f08: eth0,eth1,eth2,eth3,eth4
 +
 +   Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0
 +
 +   Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:
 +
 +   Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth1,eth2,eth3,eth4
 +
 +   WAN/LAN Both Capable Ports 0x0000:
 +
 +Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=ffffff800025d000, physical=0x1ea0c000
 +
 + Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffffff8000261000, physical=0x1ea10000
 +
 + ===> Activate Deep Green Mode
 +
 +Initialized Runner Unicast Layer
 +
 +Initialized Runner Multicast Layer
 +
 +[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.[0m
 +
 +Enabled Runner binding to Flow Cache
 +
 +Initialized Runner Protocol Layer (800)
 +
 +Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
 +
 +NComm TMS V6.85 Kernel Module loaded.
 +
 +Broadcom 802.1Q VLAN Interface, v0.1
 +
 +RDPA DS WAN UDP Filter Command Driver
 +
 +Ethernet Auto Power Down and Sleep: Enabled
 +
 +Energy Efficient Ethernet: Enabled
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +
 +[switch] Interface eth0 is set to WAN
 +[switch] Interface eth1 tm is set
 +[switch] Interface eth2 tm is set
 +[switch] Interface eth3 tm is set
 +[switch] Interface eth4 tm is set
 +[switch] Interface eth0 tm is set
 +[switch] SETUP switch  base settings success!
 +[switch] SETUP vlan settings success!
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
 +
 +IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +
 +device eth1 entered promiscuous mode
 +
 +device eth2 entered promiscuous mode
 +
 +device eth3 entered promiscuous mode
 +
 +device eth4 entered promiscuous mode
 +
 +=====>>>>> wifi_calibrate_data_check
 +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +
 +ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 +
 +ehci-platform: EHCI generic platform driver
 +
 +ohci-platform: OHCI generic platform driver
 +
 +++++ Powering up USB blocks
 +
 +dhd_module_init in
 +
 +dhd_queue_budget = 256
 +
 +dhd_sta_threshold = 2048
 +
 +dhd_if_threshold = 65536
 +
 +no wifi platform data, skip
 +
 +PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
 +
 +dhdpcie_init: can't find adapter info for this chip
 +
 +pcieh 0000:01:00.0: enabling device (0000 -> 0002)
 +
 +DHD: dongle ram size is set to 1835008(orig 1835008) at 0x200000
 +
 +dhd:0: fw path:(null) nv path:(null)
 +
 +Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc251268
 +
 + Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calculated entries= 128 RDD Base=0x1ea07000K descriptor=0xffffffbffc251268
 +
 +RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>
 +
 +RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>
 +
 +Scratch pad is not initialized.
 +
 +dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
 +
 +dhd_attach(): thread:dhd_watchdog_thread:101b started
 +
 +dhd_deferred_work_init: work queue initialized 
 +
 +Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc2b0ce0
 +
 + Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc2b0d10
 +
 + [1m[34m wfd_bind: Dev eth5 wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3[0m
 +
 +Instantiating WFD 0 thread
 +
 +dhd:0: fw path:(null) nv path:(null)
 +
 +dhd_bus_download_firmware: firmware path=, nvram path=
 +
 +dhdpcie_ramsize_adj: Enter
 +
 +dhdpcie_ramsize_adj: Adjust dongle RAMSIZE to 0x240000
 +
 +xhci-hcd xhci-hcd.0: xHCI Host Controller
 +
 +xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
 +
 +xhci-hcd xhci-hcd.0: hcc params 0x0250f17c hci version 0x100 quirks 0x00010010
 +
 +xhci-hcd xhci-hcd.0: irq 28, io mem 0x8000d000
 +
 +hub 1-0:1.0: USB hub found
 +
 +hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
 +
 +hotplug detected product:  1d6xhci-hcd xhci-hcd.0: xHCI Host Controller
 +
 +xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
 +
 +usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
 +
 +b/2/401
 +hotphub 2-0:1.0: USB hub found
 +
 +lug detected product:  1d6b/2/401
 +hotplug detectedhub 2-0:1.0: 2 ports detected
 +
 +ehci-platform ehci-platform.0: EHCI Host Controller
 +
 + product:  1d6b/3/401
 +ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 3
 +
 +ehci-platform ehci-platform.0: irq 30, io mem 0x8000c300
 +
 +hotplug detected product:  1d6b/3/401
 +ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
 +
 +hub 3-0:1.0: USB hub found
 +
 +hub 3-0:1.0: 2 ports detected
 +
 +hotplug detected product:  1d6b/2/401
 +ohci-platform ohci-platform.0: Generic Platform OHCI controller
 +
 +ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 4
 +
 +ohci-platform ohci-platform.0: irq 29, io mem 0x8000c400
 +
 +hub 4-0:1.0: USB hub found
 +
 +hub 4-0:1.0: 2 ports detected
 +
 +dhdpcie_download_code_array: Download, Upload and compare succeeded (4366c0-roml/pcie-ag-splitrx-fdap-mbss-mfp-wnm-osen-wl11k-wl11u-txbf-pktctx-amsdutx-ampduretry-chkd2hdma-proptxstatus-11nprop-obss-dbwsw-ringer-dmaindex16-bgdfs-stamon-hostpmac-murx-splitassoc-dyn160-dhdhdr, 2017.11.21.102111, 2017/11/21 10:21:11).
 +
 +hotplug detected product:  1d6b/1/401
 +hotplug detected product:  1d6b/1/401
 +dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
 +
 +usbcore: registered new interface driver usb-storage
 +
 +random: nonblocking pool is initialized
 +
 +PCIe shared addr (0x002bc3fc) read took 196383 usec before dongle is ready
 +
 +DMA RX offset from shared Area 0
 +
 +dhdpcie_readshared: Dongle advertizes 2 size indices
 +
 +dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it
 +
 +H2D DMA WR INDX : array size 576 = 2 * 266
 +
 +D2H DMA RD INDX : array size 64 = 2 * 3
 +
 +D2H DMA WR INDX : array size 64 = 2 * 3
 +
 +H2D DMA RD INDX : array size 576 = 2 * 266
 +
 +ring_info_raw: 56 
 +
 +28 53 43 00 f8 63 43 00 0c 66 43 00 20 68 43 00 
 +
 +26 68 43 00 00 00 00 00 00 00 00 00 00 00 00 00 
 +
 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 +
 +00 00 00 00 0a 01 00 00 
 +
 +dhdpcie_readshared: max H2D queues 266
 +
 +dhd_bus_start: Initializing 266 h2drings
 +
 +dhd_runner_flowmgr_init: bootmem name<dhd0> addr<ffffffc00c400000> size<14680064>
 +
 +Scratch pad is not initialized.
 +
 +Scratch pad is not initialized.
 +
 +Scratch pad is not initialized.
 +
 +Scratch pad is not initialized.
 +
 +dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512
 +
 +Scratch pad is not initialized.
 +
 +dhd_runner_policy_init: N+M Policy = 0 1 (HW)
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 90 23 19 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 80 40 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 4c 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 49 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 44 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 00 c0 14 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 10 14 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 c8 45 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +usb cycle succeed
 +
 +  0000: 00 cc 45 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 c0 45 15 00 00 00 00 
 +
 +dhd_bus_cmn_writeshared:
 +
 +  0000: 00 c4 45 15 00 00 00 00 
 +
 +Attach flowrings pool for 264 rings
 +
 +[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>[0m
 +
 +hotplug detected product:  1d6b/2/401
 +Initial configuration
 +
 +=================================
 +
 + rx_post_flow_ring_base_addr : ffffffc015408000
 +
 + tx_post_flow_ring_base_addr : ffffffc00c3c4000
 +
 + rx_complete_flow_ring_base_addr : ffffffc015440000
 +
 + tx_complete_flow_ring_base_addr : ffffffc015490000
 +
 +
 + r2d_wr_arr_base_addr : ffffff8001562000
 +
 + d2r_rd_arr_base_addr : ffffff8001562402
 +
 + r2d_rd_arr_base_addr : ffffff8001562c00
 +
 + d2r_wr_arr_base_addr : ffffff8001562802
 +
 + tx_post_mgmt_arr_base_addr : ffffff8001563000
 +
 + tx_post_mgmt_arr_base_phys_addr : 0x1545d000
 +
 +
 + r2d_wr_arr_base_phys_addr : 0x1545c000
 +
 + d2r_rd_arr_base_phys_addr : 0x1545c402
 +
 + r2d_rd_arr_base_phys_addr : 0x1545cc00
 +
 + d2r_wr_arr_base_phys_addr : 0x1545c802
 +
 +
 + Doorbell ISR : ffffffbffc81ff00
 +
 + Doorbell CTX : ffffffc018b1b400
 +
 +[0;33;40mRunner DHD Offload initialization complete[0m
 +
 +dhd_rx_frame: net device is NOT registered. drop event packet
 +
 +dhd_rx_frame: net device is NOT registered. drop event packet
 +
 +CUR_ETHERADDR : 6 
 +
 +ac 84 c6 2d c0 36 
 +
 +dhd_sync_with_dongle: GET_REVINFO device 0x43cc, vendor 0x14e4, chipnum 0xaa92
 +
 +Dongle Host Driver, version 1.363.6 (r)
 +
 +Compiled in drivers/net/wireless/bcmdhd on Nov 21 2017 at 10:21:50
 +
 +wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0
 +
 +Register interface [eth5]  MAC: ac:84:c6:2d:c0:36
 +
 +
 +dhd_prot_ioctl: status ret value is -4 
 +
 +dhdpcie_chipmatch: Unsupported vendor 14e4 device 4360
 +
 +dhdpcie_pci_probe: chipmatch failed!!
 +
 +Broadcom PCI Device 0x4906 has allocated with driver pcieport
 +
 +Broadcom PCI Device 0x4906 has allocated with driver pcieport
 +
 +dhd_module_init out
 +
 +CONSOLE: 000000.000 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 000000.000 srom rev:0
 +
 +CONSOLE: 000000.000 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 000000.000 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 000000.000 Setting clocks to 800/400/200
 +
 +CONSOLE: 000000.000 si_set_bb_vcofreq_frac: only work on 4360, 4350
 +
 +CONSOLE: 000000.000 Enabling D-cache
 +
 +CONSOLE: 026738.568 gic_dist_init max_irq 64
 +
 +CONSOLE: 026738.569 c_init: Watchdog reset bit set, clearing
 +
 +CONSOLE: 026738.569 
 +
 +CONSOLE: RTE (PCIE-MSG_BUF) 10.10.122.308 (r) on BCM43666 r4 @ 40.0/200.0/800.0MHz
 +
 +CONSOLE: 026738.569 nvram_init: called again without calling nvram_exit()
 +
 +CONSOLE: 026738.569 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 026738.587 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.602 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.608 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.615 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.617 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.617 srom rev:0
 +
 +CONSOLE: 026738.617 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 026738.617 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 026738.617 allocating a max of 511 rxcplid buffers
 +
 +CONSOLE: 026738.617 pciemsgbuf0: Broadcom PCIE MSGBUF driver
 +
 +CONSOLE: 026738.617 nvram_init: called again without calling nvram_exit()
 +
 +CONSOLE: 026738.617 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 026738.634 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.649 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.656 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.662 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.664 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.664 srom rev:0
 +
 +CONSOLE: 026738.664 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 026738.664 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 026738.664 wlc_ucode_download: wl0: Loading non-MU ucode
 +
 +CONSOLE: 026738.665 reclaim section 0: Returned 216 bytes to the heap
 +
 +CONSOLE: 026738.665 initvars_cis_pci: Not CIS format
 +
 +CONSOLE: 026738.682 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.697 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.704 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.711 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.712 sprom_read_pci: buf[0] = 0xffff, returning bad-crc
 +
 +CONSOLE: 026738.713 srom rev:0
 +
 +CONSOLE: 026738.713 initvars_srom_pci, SROM CRC Error
 +
 +CONSOLE: 026738.713 initvars_srom_pci, Using external nvram
 +
 +CONSOLE: 026738.713 wlc_bmac_attach, deviceid 0x43cc nbands 1
 +
 +CONSOLE: 026738.719 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000
 +
 +CONSOLE: 026738.720 wl0: wlc_bmac_attach: chiprev 4 corerev 65 cccap 0x58400009 maccap 0xf0018705 band 5G, phy_type 11 phy_rev 33
 +
 +CONSOLE: 026738.720 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026738.720 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026738.721 wl0: wlc_stf_txcore_shmem_write: No clock
 +
 +CONSOLE: 026738.721 wl0: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512
 +
 +CONSOLE: 026738.724 wl_eventq_dup_event: wl_eventq not initialized
 +
 +CONSOLE: 026738.724 wl_eventq_dup_event: wl_eventq not initialized
 +
 +CONSOLE: 026738.724 wl0: Broadcom BCM43666 802.11 Wireless Controller 10.10.122.308 (r)
 +
 +CONSOLE: 026738.724 SPLITRX_MODE_2 enabled : tcmsegsize 160 
 +
 +CONSOLE: 026738.724 TCAM: 512 used: 228 exceed:0
 +
 +CONSOLE: 026738.724 reclaim section 1: Returned 180292 bytes to the heap
 +
 +CONSOLE: 026738.725 ThreadX v5.6 initialized
 +
 +CONSOLE: 
 +
 +CONSOLE: 026739.054 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026739.054 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +Lan Domain: tplinklogin.net
 +
 +Lan Domain: www.tplinklogin.net
 +
 +wl_module_init: passivemode set to 0x0
 +
 +wl_module_init: txworkq set to 0x0
 +
 +wl 0001:01:00.0: enabling device (0000 -> 0002)
 +
 +eth6: Broadcom BCM4360 802.11 Wireless Controller 7.14.164.3 (TOB) (r)
 +
 +device eth6 entered promiscuous mode
 +
 +br-lan: port 5(eth6) entered forwarding state
 +
 +br-lan: port 5(eth6) entered forwarding state
 +
 +device wl1.1 entered promiscuous mode
 +
 +br-lan: port 6(wl1.1) entered forwarding state
 +
 +br-lan: port 6(wl1.1) entered forwarding state
 +
 +device eth5 entered promiscuous mode
 +
 +br-lan: port 7(eth5) entered forwarding state
 +
 +ubi1 error: ubi_open_volume: cannot open device 1, volume 0, error -16
 +
 +br-lan: port 7(eth5) entered forwarding state
 +
 +dhd_prot_ioctl: status ret value is -29 
 +
 +wfd_registerdevice Device already registered for wfd_idx 0 ifidx 0
 +
 +wfd_registerdevice Successfully registered dev wl0.1 ifidx 0 wfd_idx 0
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +dhd_wmf_igs_broadcast: WMF: send failure
 +
 +IGMP Query send failed
 +
 +Register interface [wl0.1]  MAC: ac:84:c6:2d:c0:36
 +
 +
 +dhd_prot_ioctl: status ret value is -4 
 +
 +dhd_prot_ioctl: status ret value is -13 
 +
 +dhd_prot_ioctl: status ret value is -13 
 +
 +dhd_prot_ioctl: status ret value is -20 
 +
 +dhd_prot_ioctl: status ret value is -2 
 +
 +dhd_prot_ioctl: status ret value is -2 
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +dhd_prot_ioctl: status ret value is -23 
 +
 +CONSOLE: 026740.432 wl0: wl_open
 +
 +CONSOLE: 026740.433 wlc_ucode_download: wl0: Loading non-MU ucode
 +
 +dhd_set_mac_addr_handler: MACID is overwritten
 +
 +CONSOLE: 026740.434 wl0: CORE INIT : nfifo 32 mu_tx_enab 0
 +
 +device wl0.1 entered promiscuous mode
 +
 +CONSOLE: 026740.434 wl0: CORE INIT : mode 2 pktclassify 1 rxsplit 0  hdr conve 0 DMA_CT Enabled
 +
 +br-lan: port 8(wl0.1) entered forwarding state
 +
 +br-lan: port 8(wl0.1) entered forwarding state
 +
 +CONSOLE: 026740.449 reclaim section postattach: Returned 103120 bytes to the heap
 +
 +CONSOLE: 026740.450 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026740.450 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026740.508 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026740.524 wl0: invalid chanspec 0x1000
 +
 +CONSOLE: 026740.539 wl0: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512
 +
 +CONSOLE: 026740.550 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026740.557 wl0: wl_open
 +
 +CONSOLE: 026740.558 wlc_ucode_download: wl0: Loading MU ucode
 +
 +CONSOLE: 026740.559 wl0: CORE INIT : nfifo 32 mu_tx_enab 1
 +
 +CONSOLE: 026740.559 wl0: CORE INIT : mode 2 pktclassify 1 rxsplit 0  hdr conve 0 DMA_CT Enabled
 +
 +CONSOLE: 026740.572 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
 +
 +CONSOLE: 026740.572 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0
 +
 +CONSOLE: 026742.576 bcm_pack_xtlv_entry: no space tlv_buf: requested:28, available:12
 +
 +ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 258 for peer 01:00:5e:00:00:01 prio 3 ifindex 1
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +CONSOLE: 026743.501 wl0: link up (wl0)
 +
 +CONSOLE: 026743.503 wl0: link up (wl0.1)
 +
 +CONSOLE: 026743.513 pciedev_send_ltr:Giving up:0x302
 +
 +monitor task is initialized pid= 7000 
 +
 +=====>>>>> wireless setting is finished
 +usbshare boot start
 +usbshare boot end
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +tfs_stats.c(309)-tfs_stats_set_interval:Set interval:1 failed!tfs_data.c(235)-tfs_data_clean_entries:clean cmd: rm /tmp/tfs//*
 +tfs_stats.c(416)-tfs_stats_init:Delete all stats failed!USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +General shell run!
 +CONSOLE: 026744.730 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026744.730 flow_create : bitmap_size=512  maxitems=512
 +
 +USB port event happened -- port=
 +USB port event happened -- port=
 +sysctl (7547): drop_caches: 3
 +
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=
 +tfs_stats.c(344)-tfs_stats_get_all:Get stats failed!tfs_ubus.c(434)-tfs_ubus_timeout_proc:Ubus get stats failed!USB port event happened -- port=
 +USB port event happened -- port=
 +[switch] switch port eth0 <0 3> phymode is set to 0
 +[switch] SETUP port (0) media-type: 1000 full on!
 +[switch] switch ports is linked up!
 +CONSOLE: 026750.747 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026750.748 wl0.0: wlc_send_bar: seq 0x1 tid 0
 +
 +CONSOLE: 026751.296 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026751.297 wl0.0: wlc_send_bar: seq 0x1 tid 6
 +
 +br-lan: port 5(eth6) entered forwarding state
 +
 +br-lan: port 6(wl1.1) entered forwarding state
 +
 +br-lan: port 7(eth5) entered forwarding state
 +
 +br-lan: port 8(wl0.1) entered forwarding state
 +
 +CONSOLE: 026755.796 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026755.980 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026756.573 wl0.0: wlc_send_bar: seq 0x3 tid 0
 +
 +CONSOLE: 026756.660 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026756.661 wl0.0: wlc_send_bar: seq 0x1 tid 0
 +
 +CONSOLE: 026756.899 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026756.900 wl0.0: wlc_send_bar: seq 0x1 tid 6
 +
 +dhd_flow_rings_delete_for_peer: ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 68 for peer 40:b3:95:83:ba:49 prio 3 ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 196 for peer 40:b3:95:83:ba:49 prio 0 ifindex 0
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +CONSOLE: 026769.775 wl0: Proxy STA 40:b3:95:83:ba:49 link is already gone !!??
 +
 +br-lan: received packet on eth5 with own address as source address
 +
 +CONSOLE: 026777.472 flow_create : bitmap_size=512  maxitems=2048
 +
 +CONSOLE: 026777.473 wl0.0: wlc_send_bar: seq 0x1 tid 0
 +
 +CONSOLE: 026777.572 wl0: STA 90:61:ae:fa:19:9b selected as MU client at index 0.
 +
 +CONSOLE: 026777.572 wl0: STA 00:08:f0:14:fb:8d selected as MU client at index 1.
 +
 +CONSOLE: 026777.826 flow_create : bitmap_size=512  maxitems=512
 +
 +CONSOLE: 026777.827 wl0.0: wlc_send_bar: seq 0x1 tid 6
 +
 +CONSOLE: 026778.228 wl0.0: wlc_send_bar: seq 0x17 tid 0
 +
 +CONSOLE: 026781.480 wl0.0: wlc_send_bar: seq 0x18 tid 0
 +
 +dhd_flow_rings_delete_for_peer: ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 68 for peer 90:61:ae:fa:19:9b prio 3 ifindex 0
 +
 +dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 196 for peer 90:61:ae:fa:19:9b prio 0 ifindex 0
 +
 +dhd_flow_rings_delete_for_peer: ifindex 0
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 
 +
 +CONSOLE: 026790.562 wl0: STA 90:61:ae:fa:19:9b removed from MU client set.
 +
 +CONSOLE: 026790.572 wl0: STA 00:08:f0:14:fb:8d removed from MU client set.
 +
 +debug.zy Kernel Send MSG_NETLINK_BRCM_LED_SWITCH_PRESSED To IPF Center.
 +
 +usb 3-1: new high-speed USB device number 2 using ehci-platform
 +
 +usb-storage 3-1:1.0: USB Mass Storage device detected
 +
 +hotplug detected product:  951/1653/1scsi host0: usb-storage 3-1:1.0
 +
 +00
 +hotplug detected product:  951/1653/100
 +USB port event happened -- port=
 +USB port event happened -- port=
 +USB port event happened -- port=1
 +USB port event happened -- port=1
 +scsi 0:0:0:0: Direct-Access     Kingston DT 100 G2        PMAP PQ: 0 ANSI: 0 CCS
 +
 +sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
 +
 +sd 0:0:0:0: [sda] Write Protect is off
 +
 +sd 0:0:0:0: [sda] No Caching mode page found
 +
 +sd 0:0:0:0: [sda] Assuming drive cache: write through
 +
 + sda: sda1
 +
 +sd 0:0:0:0: [sda] Attached SCSI removable disk
 +
 +tntfs info (device sda, pid 10043): ntfs_fill_super(): fail_safe is enabled.
 +
 +tfat: fail_safe is enabled
 +
 +[EXFAT] trying to mount...
 +
 +FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
 +
 +tntfs info (device sda1, pid 10188): ntfs_fill_super(): fail_safe is enabled.
 +
 +tntfs info (device sda1, pid 10188): load_system_files(): NTFS volume name 'king', version 3.1 (cluster_size 4096, PAGE_SIZE 4096).
 +
 +
 +
 +
 +BusyBox v1.19.4 (2017-09-19 21:34:17 CST) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +
 +     MM           NM                    MMMMMMM          M       M
 +   $MMMMM        MMMMM                MMMMMMMMMMM      MMM     MMM
 +  MMMMMMMM     MM MMMMM.              MMMMM:MMMMMM:   MMMM   MMMMM
 +MMMM= MMMMMM  MMM   MMMM       MMMMM   MMMM  MMMMMM   MMMM  MMMMM'
 +MMMM=  MMMMM MMMM    MM       MMMMM    MMMM    MMMM   MMMMNMMMMM
 +MMMM=   MMMM  MMMMM          MMMMM     MMMM    MMMM   MMMMMMMM
 +MMMM=   MMMM   MMMMMM       MMMMM      MMMM    MMMM   MMMMMMMMM
 +MMMM=   MMMM     MMMMM,    NMMMMMMMM   MMMM    MMMM   MMMMMMMMMMM
 +MMMM=   MMMM      MMMMMM   MMMMMMMM    MMMM    MMMM   MMMM  MMMMMM
 +MMMM=   MMMM   MM    MMMM    MMMM      MMMM    MMMM   MMMM    MMMM
 +MMMM$ ,MMMMM  MMMMM  MMMM    MMM       MMMM   MMMMM   MMMM    MMMM
 +  MMMMMMM:      MMMMMMM             MMMMMMMMMMMM  MMMMMMM MMMMMMM
 +    MMMMMM       MMMMN               MMMMMMMMM      MMMM    MMMM
 +     MMMM          M                    MMMMMMM        M       M
 +       M
 + ---------------------------------------------------------------
 +   For those about to rock... (Attitude Adjustment, unknown)
 + ---------------------------------------------------------------
 +root@AC2300:/#
 +</nowiki>
 +</WRAP>
 +
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>BCM4906 2core dualcore ARMv8 GigabitEthernet 4Port BCM4365E BCM4360 802.11n 802.11bg 802.11bgn 802.11abgn 802.11ac 3Ant 128Flash 512RAM USB2.0 USB3.0 archerc2300}}+{{tag>BCM4906 2core dualcore ARMv8 GigabitEthernet 4Port BCM4365E BCM4360 802.11n 802.11bg 802.11bgn 802.11abgn 802.11ac 3Ant 128Flash 512RAM USB2.0 USB3.0}}
  • Last modified: 2021/02/07 22:48
  • by dsouza