User Tools

Site Tools


inbox:toh:sercomm:sercomm_vox30_v1

Sercomm Vox30 v1

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

LA Vodafone Pawore Station è l'evoluzione della sua precedente VSR è un modem router dalle alte prestazioni distribuito nel mercato italiano come VPS e nel mercato irlandese come gigabox. Il Router Vodafone Power Station SHG 3000 (Sercomm) utilizza un alimentatore da 2,5A 50-60 Hz 100-220 V ha una porta telefonico DSL e due porte telefoniche 4 porte 10/100/1000 ethernet rj45 e una giga wan ha una porta sfp per l'installazione di un eventuale mini Ont. Supporta adsl/adsl2+ (20 Mbit), vdsl2 17a/35b/g.fast/g.inp (200 Mbit), FTTH (1 Gbit) (mediante ont sfp),Wi-Fi 2.4ghz a, b, g, n (3 antenne/450 Mbit) e 5.0ghz a, n, ac (4 antenne/1.733 Mbit).

Vodafone Power Station

OpenWrt support

Not supported.

Hardware highlights

CPU Ram Flash Network WLAN USB Serial JTag
Broadcom BCM63136, ARM Cortex A9 Dual Core 1GHz 512 MiB 256 MiB 4x 10/100 /1000 bgnh 2x 2.0 1 ?

Hardware

Info

Architecture EXAMPLE MIPS
Vendor Vodafone italia Vodafone Irlanda Vodafone UK
Bootloader ??????????????
System-On-Chip BCM63136SVKFSBG
CPU/Speed 1Ghz
Flash-Chip Macronix MXIC MX8CLF2G18AC-11
Flash size 256 MiB
RAM 512 MiB
Wireless 2.4Ghz Broadcom BCM4360 b/g/n, 3×3, 450Mbit
Wireless 5Ghz Broadcom BCM4366 ARM Cortex A7 800MHz, a/n/ac, 4×4 MU-MIMO, 1733Mbit
Ethernet 10/100/1000 Mbit/s wan support
Wan ADSL [20Mbit-7Mbit] / FTTC [100Mbit/20Mbit][50Mbit/10Mbit][30Mbit/3Mbit]
USB 2x 2.0
Serial 1
JTAG ?

Photos

Front
Back
Top side
Bottom stand sotto.jpg
Back panel (board removed)
Front panel (board removed)

Photos

Front
Back ASCII���Hisilicon Balong
CPU ASCII���Hisilicon Balong

Opening the case

Remove the three screws on the bottom and then remove the USB port cover on the back where the Vodafone key k5160 is housed and pull from the other side using a little force. The PCB is fixed on the front with six star screws.

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

For the UK variant, the serial header is J203. From the notch, 3.3V, GND, TXD, RXD.

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for Sercomm Vox30 v1
115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

OEM bootlog


BTRM V1.6 PMCS AFEL PWRZ MEML PMCD MEMP CODE ZBSS MAIN CACH OTP? OTPP ROTB SCBT NAND IMG? IMGL HDR? HDRP MCV? KEY? KEYA MID? MIDP MCVA SBI? SBIA PASS


HELO CPU0 PMCM PMCS PMCD CODE L1CD MMUI ZBBS MAIN 4.1603-1.0.38-116.174 DRAM NVRAM memcfg 0x427 MCB chksum 0xf67f5b05 DDR3-1600 CL11 512MB

MemsysInit lpe2_custom 0p10 20140709 DDR3 807120CC 80003000 00000070 016028BC MCB rev=0x00020201 Ref ID=0x028BC Sub Bld=0x016

ZQ Cal LP PHY p_term=0x06 n_term=0x06 p_drive=0x10 n_drive=0x10 PLL Ref(Hz)=0x02FAF080 UI STEPS=0x04C DDR CLK(MHz)=0x31F WL CLK dly(ps)=0x0C8 bitT(ps)=0x271 VDLsize(fs)=0x201F CLK_VDL=0x020 Changed Byte Lane LDE Changed Byte Lane LDE Add/Ctl Alignment no adjustment memsys_init call phy init returns 0x00000000 MEMC init size 2 clock 6

MemsysInit lpe2_custom 0p10 20140709 DDR3 807120CC 80003000 000003E0 016028BC MCB rev=0x00020201 Ref ID=0x028BC Sub Bld=0x016

SHMOO 28nm 0p9 20140709 80003000 80002500 00000000 00020000 00000000 ROSC Auto clk counter start Found inflection point ROSC final result: nRing Osc Meas check rosc 0x00 = 0x0000009C clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x01 = 0x000000B4 clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x02 = 0x000000A7 clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x03 = 0x000000F1 clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x04 = 0x000000DF clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x05 = 0x000000FE clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x06 = 0x00000084 clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x07 = 0x00000053 clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x08 = 0x000000BD clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x09 = 0x000000AA clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x0A = 0x00000082 clk_count = 0x000004F9 scb_clk = 0x0064 MHz rosc 0x0B = 0x000000A9 clk_count = 0x000004F9 scb_clk = 0x0064 MHz

ROSC Auto clk counter finished One UI Steps : 0x57

Shmoo WL

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 S————————–X+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 01 S——————–X+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Using passive Rd Data Delay SET RD DATA DELAY 0x800034B0 = 0x00000006 SET RD DATA DELAY 0x800036B0 = 0x00000006

Shmoo RD En Initial: WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2 Post: WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2 Initial: WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2 Post: WL Cyc=0x0 ODT Delay=0x0 ODT PreLen=0x2 B0 RISE UI=1 VDL=1E PICK UI=2 VDL=1E B1 RISE UI=1 VDL=23 PICK UI=2 VDL=23

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 –S—————————X++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 01 –S——————————–X+++++++++++++++++++++++++++++++++++++++++++++++++++

Rd Dat Dly 6 ++ 5 ++ 4 ++ 3 ++ 2 –

Converged RD-DAT-DLY = 2 BL0 Final RD-DAT-DLY = 4 BL1 Final RD-DAT-DLY = 4

Shmoo RD DQ NP DQS : B0 VDL=4D ok B1 VDL=4C ok

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 ——–++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++————- 01 —————++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——- 02 ————+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++———— 03 —————+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++—– 04 –++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++——————- 05 —————-+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++— 06 ———-++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++———– 07 ———————++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++ 08 ——–++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++————– 09 —————+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——– 10 ————++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++————- 11 —————-++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++—— 12 ————-++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——— 13 —————+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++——— 14 ————+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++———– 15 —————-+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——-

Shmoo RD DQ P

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 ——-+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++———— 01 ————-+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++—— 02 ———-+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++————- 03 —————+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++—– 04 ++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++—————— 05 —————++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++— 06 ———-+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++———- 07 ——————–++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++ 08 ——–++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++————– 09 ————–++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++——- 10 ——–+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++———— 11 ————–+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++—– 12 ———–+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++——— 13 ————–++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++——- 14 ———-++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++———– 15 ————–+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++—–

Shmoo RD DQ N

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 ——–++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++————- 01 —————++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——- 02 ————+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++———— 03 —————++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++— 04 –++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++——————- 05 —————-+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++— 06 ———-++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++———– 07 ———————++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++ 08 ———++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++————- 09 —————-+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++——– 10 ———–+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++————- 11 —————-++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++—— 12 ————-++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——— 13 —————+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++——— 14 ————+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++———– 15 —————-+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——-

Shmoo WR DQ

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 ——–++++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++++——— 01 ————–++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++—- 02 ———-++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++——– 03 —————-++++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++++- 04 —++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++—————— 05 ——————++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++— 06 ————++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++———- 07 ———————–+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++ 08 –++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++——————- 09 ——-++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++———– 10 —++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++——————- 11 ——-++++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++———– 12 —-++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++—————– 13 ——+++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++————– 14 —++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++—————— 15 ——–+++++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++++++———–

Shmoo WR DM WR DM

 000000000011111111112222222222333333333344444444445555555555666666666677777777778888888
 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456

00 ———+++++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++++——- 01 -++++++++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++++++++++——– memsys_init call shmoo returns 0x00000000 PASS

Technicolor Gateway © 2019, All rights reserved

Gateway initialization sequence started Status wait timeout: nandsts=0x30000000 mask=0x40000000, count=0 Boot Loader Version : 19.02.1146-0000000-20190110090550-897d2844f012557134a272eb8a8a90f85e9a7a8d Boot Loader OID : 5c3707ae5427bc3aef0bdfd7 CPU : BCM63136B0 RAM : 512MB Flash : 250MB NAND Board Mnemonic : VCNT-I Market ID : FFFC Variant ID : VU Booting : Bank 1 SW Version : 17.4.c.0277-2441004-20190521105542-f0ed0605a553eadb7abd132d4728c288c52e2d9d Starting the Linux kernel

Enabling watchdog Code Address: 0x00008000, Entry Address: 0x00008000 Decompression OK! Entry at 0x00008000 Closing network. Starting program at 0x00008000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 4.1.38 (repowrt-builder@0e3f98211bf6) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 unknown) ) #1 SMP PREEMPT Tue Apr 9 00:48:46 UTC 2019 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: BCM963138 [ 0.000000] Prozone memory from command line 1ffe0000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x1ff00000 to virtual address at 0xdff00000 with size of 0x100000 byte for TCH_RESERVED [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0fd00000 to virtual address at 0xcfd00000 with size of 0x300000 byte for adsl [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0d000000 to virtual address at 0xcd000000 with size of 0x2c00000 byte for tm [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0cc00000 to virtual address at 0xccc00000 with size of 0x400000 byte for mc [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0c000000 to virtual address at 0xcc000000 with size of 0xb00000 byte for dhd0 [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0b200000 to virtual address at 0xcb200000 with size of 0xe00000 byte for dhd1 [ 0.000000] On node 0 totalpages: 111360 [ 0.000000] free_area_init_node: node 0, pgdat c050be60, node_mem_map dfa75000 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4096 pages, LIFO batch:0 [ 0.000000] Normal zone: 1116 pages used for memmap [ 0.000000] Normal zone: 107264 pages, LIFO batch:31 [ 0.000000] pmc_init:PMC using DQM mode [ 0.000000] pmc_init:fcbf 3650362 4b004b [ 0.000000] PERCPU: Embedded 11 pages/cpu @dfa4f000 s15392 r8192 d21472 u45056 [ 0.000000] pcpu-alloc: s15392 r8192 d21472 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 110208 [ 0.000000] Kernel command line: console=ttyS0,115200 irqaffinity=0 debug root=/dev/mtdblock1 rootfstype=squashfs tbbt_addr=0xfaa0000 btab=0xa080c btab_bootid=1 bl_version=19.02.1146-0000000-20190110090550-897d2844f012557134a272eb8a8a90f85e9a7a8d board=VCNT-I platform.prozone_addr=0x1ffe0000 bl_oid=5c3707ae5427bc3aef0bdfd7 .r2secr=0x1ffdf000 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 435232K/445440K available (3801K kernel code, 231K rwdata, 1080K rodata, 188K init, 309K bss, 10208K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbec00000 - 0xbfe00000 ( 18 MB) [ 0.000000] .text : 0xc0008000 - 0xc04cc9d4 (4883 kB) [ 0.000000] .init : 0xc04cd000 - 0xc04fc000 ( 188 kB) [ 0.000000] .data : 0xc04fc000 - 0xc0535e50 ( 232 kB) [ 0.000000] .bss : 0xc0535e50 - 0xc05834c4 ( 310 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:256 [ 0.000000] Cortex A9 MPCORE GIC init [ 0.000000] DIST at fc01f000, CPU_IF at fc01e100 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02070000 → 0x6a450000 [ 0.000000] L2C: DT/platform tries to modify or specify cache size [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 I prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x6e450001 [ 0.000000] L2C: failed to init: -19 [ 0.000000] map_hw_timer_interrupt,127: interrupt_id 96 [ 0.000000] map_hw_timer_interrupt,127: interrupt_id 97 [ 0.000000] map_hw_timer_interrupt,127: interrupt_id 98 [ 0.000000] map_hw_timer_interrupt,127: interrupt_id 99 [ 0.000000] clocksource timer_cs: mask: 0x3fffffff max_cycles: 0x3fffffff, max_idle_ns: 9556302227 ns [ 0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns [ 0.052000] console [ttyS0] enabled [ 0.053000] Calibrating delay loop… 1990.65 BogoMIPS (lpj=995328) [ 0.062000] pid_max: default: 32768 minimum: 301 [ 0.064000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.065000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.067000] –Kernel Config– [ 0.068000] SMP=1 [ 0.069000] PREEMPT=1 [ 0.070000] DEBUG_SPINLOCK=0 [ 0.071000] DEBUG_MUTEXES=0 [ 0.073000] Initializing cgroup subsys blkio [ 0.074000] Initializing cgroup subsys memory [ 0.075000] Initializing cgroup subsys debug [ 0.076000] CPU: Testing write buffer coherency: ok [ 0.078000] Broadcom Logger v0.1 [ 0.093000] Setting up static identity map for 0x8220 - 0x8254 [ 0.109000] Brought up 2 CPUs [ 0.110000] SMP: Total of 2 processors activated (3981.31 BogoMIPS). [ 0.111000] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1f) [ 0.112000] CPU: This may indicate a broken bootloader or firmware. [ 0.116000] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.117000] NET: Registered protocol family 16 [ 0.119000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.125000] cpuidle: using governor ladder [ 0.131000] cpuidle: using governor menu [ 0.148000] SCSI subsystem initialized [ 0.149000] usbcore: registered new interface driver usbfs [ 0.150000] usbcore: registered new interface driver hub [ 0.151000] usbcore: registered new device driver usb [ 0.152000] bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated [ 0.153000] skb_free_task created successfully [ 0.154000] gbpm_do_work scheduled [ 0.154000] BLOG v3.0 Initialized [ 0.157000] BLOG Rule v1.0 Initialized [ 0.157000] Broadcom IQoS v0.1 initialized [ 0.157000] Broadcom GBPM v0.1 initialized [ 0.157000] NET: Registered protocol family 8 [ 0.157000] NET: Registered protocol family 20 [ 0.183000] Switched to clocksource timer_cs [ 0.185000] NET: Registered protocol family 2 [ 0.186000] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.187000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.188000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.189000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.190000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.191000] NET: Registered protocol family 1 [ 0.192000] PCI: CLS 0 bytes, default 32 [ 0.194000] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.196000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.197000] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.198000] fuse init (API version 7.23) [ 0.200000] io scheduler noop registered (default) [ 0.202000] Broadcom NAND controller (BrcmNand Controller) [ 0.203000] mtd→oobsize=0, mtd→eccOobSize=0 [ 0.203000] NAND_CS_NAND_XOR=00000000 [ 0.204000] Disabling XOR: Before: SEL=40000001, XOR=00000000 [ 0.205000] Disabling XOR: After: SEL=40000000, XOR=00000000 [ 0.206000] B4: NandSelect=40000000, nandConfig=26152300, chipSelect=0 [ 0.207000] brcmnand_read_id: CS0: dev_id=2cda9095 [ 0.208000] After: NandSelect=00000000, nandConfig=26152300 [ 0.209000] Block size=00020000, erase shift=17 [ 0.210000] NAND Config: Reg=26152300, chipSize=256 MB, blockSize=128K, erase_shift=11 [ 0.211000] busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff [ 0.212000] BrcmNAND mfg 2c da MICRON MT29F2G08ABA 256MB on CS0 [ 0.213000] [ 0.213000] Found NAND on CS0: ACC=c388001b, cfg=26152300, flashId=2cda9095, tim1=65324458, tim2=80000e54 [ 0.214000] BrcmNAND version = 0x80000700 256MB @00000000 [ 0.215000] brcmnand_scan: B4 nand_select = 00000000 [ 0.216000] brcmnand_scan: After nand_select = 00000000 [ 0.217000] handle_acc_control: default CORR ERR threshold 6 bits [ 0.218000] ACC: 27 OOB bytes per 512B ECC step; from ID probe: 16 [ 0.219000] Use strap setting for ecc size 27 bytes, mtd→oobsize 108. [ 0.220000] page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17 [ 0.221000] Brcm NAND controller version = 7.0 NAND flash size 256MB @10000000 [ 0.222000] ECC layout=brcmnand_oob_bch8_27_2k [ 0.223000] brcmnand_scan: mtd→oobsize=108 [ 0.224000] brcmnand_scan: oobavail=51, eccsize=512, writesize=2048 [ 0.225000] brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=8, eccbytes=14 [ 0.227000] Gateway flash mapping [ 0.228000] brcmnand_reset_corr_threshold: default CORR ERR threshold 6 bits for CS0 [ 0.229000] [NAND] : tBBT loaded

[ 0.230000] Technicolor nand flash translation layer initialized. [ 0.231000] flash mapping initialized, size=250 Mb [ 0.232000] parse_btab: num_banks (5) [ 0.233000] Creating 1 MTD partitions on “technicolor-nand-tl”: [ 0.233000] 0x000005c00000-0x000008860000 : “rootfs” [ 0.234000] Creating 5 MTD partitions on “technicolor-nand-tl”: [ 0.235000] 0x0000000e0000-0x000005a00000 : “rootfs_data” [ 0.236000] 0x000005a00000-0x00000aa00000 : “bank_1” [ 0.238000] 0x00000aa00000-0x00000fa00000 : “bank_2” [ 0.240000] 0x000000080000-0x0000000a0000 : “eripv2” [ 0.241000] 0x0000000a0000-0x0000000e0000 : “rawstorage” [ 0.243000] PPP generic driver version 2.4.2 [ 0.244000] PPP BSD Compression module registered [ 0.245000] PPP Deflate Compression module registered [ 0.246000] NET: Registered protocol family 24 [ 0.247000] brcmboard registered [ 0.248000] brcmboard: brcm_board_init entry [ 0.249000] print_rst_status: Last RESET due to POR reset [ 0.276000] DYING GASP IRQ Initialized and Enabled [ 0.277000] Serial: BCM63XX driver $Revision: 3.00 $ [ 0.278000] Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands) [ 0.279000] ttyS0 at MMIO 0xfffe8600 (irq = 64, base_baud = 921600) is a BCM63XX [ 0.280000] ttyS1 at MMIO 0xfffe8620 (irq = 65, base_baud = 921600) is a BCM63XX [ 0.281000] BPM: tot_mem_size=536870912B (512MB), buf_mem_size <20%> =107374180B (102MB), num of buffers=41425, buf size=2592 [ 0.283000] Broadcom BPM Module Char Driver v0.1 Registered<3004> [ 0.285000] PCIe HCD (impl1) [ 0.299000] bcm963xx-pcie: found core [0] Rev [3.01] with 1 Lanes [ 0.879000] bcm963xx-pcie bcm963xx-pcie.0: PCI host bridge to bus 0000:00 [ 0.880000] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.881000] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.882000] pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400 [ 0.883000] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.884000] PCI: bus0: Fast back to back transfers disabled [ 0.884000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.885000] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000 [ 0.886000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] [ 0.887000] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit] [ 0.888000] pci 0000:01:00.0: supports D1 D2 [ 0.889000] pci 0000:00:00.0: Checking PCIe ASPM for vendor 14e4 device aa52 [ 0.890000] pci 0000:00:00.0: Disabling PCIe ASPM for vendor 14e4 device aa52 [ 0.891000] PCI: bus1: Fast back to back transfers disabled [ 0.892000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.892000] pci 0000:00:00.0: BAR 8: assigned [mem 0x90000000-0x905fffff] [ 0.892000] pci 0000:01:00.0: BAR 2: assigned [mem 0x90000000-0x903fffff 64bit] [ 0.893000] pci 0000:01:00.0: BAR 0: assigned [mem 0x90400000-0x90407fff 64bit] [ 0.893000] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.894000] pci 0000:00:00.0: bridge window [mem 0x90000000-0x905fffff] [ 0.895000] pcieport 0000:00:00.0: enabling device (0140 → 0142) [ 0.896000] pcieport 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512 [ 0.897000] pci 0000:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512 [ 0.910000] bcm963xx-pcie: found core [1] Rev [3.01] with 1 Lanes [ 1.489000] bcm963xx-pcie bcm963xx-pcie.1: PCI host bridge to bus 0001:00 [ 1.490000] pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff] [ 1.491000] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.492000] pci 0001:00:00.0: [14e4:6313] type 01 class 0x060400 [ 1.493000] pci 0001:00:00.0: PME# supported from D0 D3hot [ 1.494000] PCI: bus0: Fast back to back transfers disabled [ 1.495000] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.496000] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000 [ 1.497000] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] [ 1.497000] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit] [ 1.498000] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref] [ 1.499000] pci 0001:01:00.0: supports D1 D2 [ 1.500000] pci 0001:00:00.0: Checking PCIe ASPM for vendor 14e4 device 4365 [ 1.501000] pci 0001:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 4365 [ 1.502000] PCI: bus1: Fast back to back transfers disabled [ 1.503000] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.503000] pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa0bfffff] [ 1.503000] pci 0001:00:00.0: BAR 9: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref] [ 1.503000] pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa07fffff 64bit] [ 1.504000] pci 0001:01:00.0: BAR 4: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref] [ 1.505000] pci 0001:01:00.0: BAR 0: assigned [mem 0xa0800000-0xa0807fff 64bit] [ 1.505000] pci 0001:00:00.0: PCI bridge to [bus 01] [ 1.506000] pci 0001:00:00.0: bridge window [mem 0xa0000000-0xa0bfffff] [ 1.507000] pci 0001:00:00.0: bridge window [mem 0xa0c00000-0xa0cfffff 64bit pref] [ 1.508000] pcieport 0001:00:00.0: enabling device (0140 → 0142) [ 1.509000] pcieport 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512 [ 1.510000] pci 0001:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512 [ 1.511000] GACT probability NOT on [ 1.512000] Mirror/redirect action on [ 1.513000] u32 classifier [ 1.514000] input device check on [ 1.515000] Actions configured [ 1.516000] NET: Registered protocol family 10 [ 1.517000] sit: IPv6 over IPv4 tunneling driver [ 1.518000] NET: Registered protocol family 17 [ 1.519000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.520000] Bridge firewalling registered [ 1.521000] Ebtables v2.0 registered [ 1.522000] ebt_time registered [ 1.523000] ebt_ftos registered [ 1.523000] 8021q: 802.1Q VLAN Support v1.8 [ 1.524000] Registering SWP/SWPB emulation handler [ 1.539000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1. [ 1.540000] Freeing unused kernel memory: 188K (c04cd000 - c04fc000) open: No such file or directory open: No such file or directory [ 2.561000] init: Console is alive [ 3.697000] random: nonblocking pool is initialized [ 4.484000] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.527000] Button Hotplug driver version 0.4.1 [ 4.549000] usbcore: registered new interface driver usb-storage [ 4.556000] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.573000] init: - preinit - [ 6.390000] jffs2: notice: (58) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. switching to overlay [ 6.430000] insmod: module is already loaded - bankmgr removing unnecessary files from inactive bank bank_2 HOMEWARE_CONFIG_ON_ACTIVE_BANK mounting overlay fs open: No such file or directory 1+0 records in 1+0 records out [ 7.047000] tommath: module license 'unspecified' taints kernel. [ 7.048000] Disabling lock debugging due to kernel taint [ 7.062000] brcm_otp_init entry [ 7.096000] eRIPv2 secrets passed correctly to Linux [ 7.133000] Dsl Annex A board [ 7.134000] Set board (VCNT-I) [ 7.465000] procd: - early - [ 8.049000] procd: - watchdog - [ 8.051000] procd: - ubus - [ 8.215000] procd: - init - [ 8.441000] jffs2: notice: (178) check_node_data: wrong data CRC in data node at 0x02c07040: read 0x379c655c, calculated 0xef777248. [ 8.616000] jffs2: notice: (178) check_node_data: wrong data CRC in data node at 0x02fe30f4: read 0xed7867a5, calculated 0xf973b3cc. [ 9.653000] tm_base_addr 0xcd000000, size 46137344, tm_base_addr_phys 0x0d000000 [ 9.654000] mc_base_addr 0xccc00000, size 4194304, mc_base_addr_phys 0x0cc00000 [ 9.655000] [ 9.655000] RDP TM memory = 44MB, MC memory = 4MB : Max Possible Bufs <15018> of size <2560>; Allocating <7680> bufs; RDP enum <2> [ 9.656000] WARNING!RDP reserved memories are wasting 21MB of memory, please adjust your reserved memory size [ 9.664000] ++++Runner gso_desc_pool created successfully [ 9.676000] RDPA DS WAN UDP Filter Command Driver [ 9.906000] kmodloader: loading kernel modules from /etc/modules.d/* [ 9.937000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0 [ 9.952000] Initializing XFRM netlink socket [ 9.958000] NET: Registered protocol family 15 [ 9.964000] ipip: IPv4 over IPv4 tunneling driver [ 9.992000] L2TP core: blog_l2tp_rcv_check [ 9.997000] l2tp_core: L2TP core driver, V2.0 [ 10.003000] l2tp_netlink: L2TP netlink interface [ 10.007000] nat46: module (version 683fbd2b765506332a1af141545652bf58f03166) loaded. [ 10.016000] gre: GRE over IPv4 demultiplexor driver [ 10.022000] ip_gre: GRE over IPv4 tunneling driver [ 10.030000] ip6_gre: GRE over IPv6 tunneling driver [ 10.037000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.055000] ncr_master_key_set_internal [ 10.059000] ncr: driver 0.2-mr1 loaded. [ 10.065000] Netfilter messages via NETLINK v0.30. [ 10.076000] ip_set: protocol 6 [ 10.106000] brcmchipinfo: brcm_chipinfo_init entry [ 10.113000] bcmxtmrt: Broadcom BCM3136B0 ATM/PTM Network Device v0.9 [ 10.120000] Created XTM Rx queue 5 with size 256,Descriptor base=00c09000 [ 10.127000] Created XTM Rx queue 6 with size 256,Descriptor base=00c0b000 [ 10.163000] OSCK Loaded! [ 10.186000] Client Private Key Loaded! [ 10.195000] Broadcom Ingress QoS Module Char Driver v0.1 Registered<3003> [ 10.202000] iq_drv_construct rdpa_cpu_get returned error [ 10.208000] [ 10.208000] Broadcom Ingress QoS ver 0.1 initialized [ 10.221000] i2c /dev entries driver [ 10.230000] NBUFF v1.0 Initialized [ 10.246000] Total # of labels = 63 [ 10.250000] Initialized fcache state [ 10.255000] Broadcom Packet Flow Cache Char Driver v4.0 Registered<3002> [ 10.263000] Created Proc FS /procfs/fcache [ 10.267000] Broadcom Packet Flow Cache registered with netdev chain [ 10.275000] Broadcom Packet Flow Cache learning via BLOG enabled. [ 10.283000] [FHW] pktDbgLvl[0xbf178124]=0 [ 10.288000] [FHW] fhw_construct: [ 10.292000] Initialized Fcache HW accelerator layer state [ 10.299000] flwStatsThread created. numFlwsPerPoll 546 maxFlwIdx 16383 [ 10.306000] Constructed Broadcom Packet Flow Cache v4.0 [ 10.316000] Initialized Runner Host Layer [ 10.319000] Initialized Runner Unicast Layer [ 10.324000] Initialized Runner L2 Unicast Layer [ 10.328000] Initialized Runner Multicast Layer [ 10.334000] Broadcom Packet Flow Cache HW acceleration enabled. [ 10.342000] Enabled Runner binding to Flow Cache [ 10.354000] Initialized Runner Protocol Layer (700) [ 10.358000] Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009> [ 10.370000] Runner Port#0 (Internal MUX Port#2) connects to Crossbar Port#1 [ 10.377000] Switch Port#3 (Internal MUX Port#0) connects to Crossbar Port#4 [ 10.384000] Unused MUX Internal Port#1 connects to Crossbar External Port#0 [ 10.391000] Cross Bar MUX Config : Internal Port 00 maps to External Port 04 <reg_val : 0x0000000c> [ 10.401000] Cross Bar MUX Config : Internal Port 01 maps to External Port 00 <reg_val : 0x00000004> [ 10.410000] Cross Bar MUX Config : Internal Port 02 maps to External Port 01 <reg_val : 0x00000044> [ 10.419000] Broadcom BCM63136_B0 Ethernet Network Device v0.1 [ 10.426000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered [ 10.433000] eth0: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:20:B0:01:8C:65:28 [ 10.443000] eth1: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:20:B0:01:8C:65:28 [ 10.454000] eth2: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:20:B0:01:8C:65:28 [ 10.464000] eth3: <Ext sw port: 3> <Logical : 11> MAC : 20:B0:01:8C:65:28 [ 10.471000] Chip Physical Port 13, Cross Bar Port 4, PHY_ID <0x0007f00b:0x0b:Internal PHY > [ 10.480000] ++++ disabling GSO on logical_port=0 dev=eth4 [ 10.486000] eth4: <Int sw port: 0> <Logical : 00> MAC : 20:B0:01:8C:65:28 [ 10.492000] Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f04c:0x0c:Internal PHY > [ 10.502000] Ethernet Auto Power Down and Sleep: Enabled [ 10.507000] Cross bar port 1 of Int switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00 [ 10.516000] Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00 [ 10.524000] Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00 [ 10.531000] Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00 [ 10.538000] Cross bar port 4 of Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00 [ 10.549000] All Port Bit Map: 0x0f01: eth4,eth0,eth1,eth2,eth3 [ 10.554000] Chip WAN Only Ports 0001, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0001:eth4 [ 10.564000] Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000: [ 10.574000] Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth0,eth1,eth2,eth3 [ 10.585000] WAN/LAN Both Capable Ports 0x0000: [ 10.591000] Created Ethernet Rx queue 4 with size 512, Descriptor base=00c0e000 [ 10.598000] Created Ethernet Rx queue 3 with size 512, Descriptor base=00c11000 [ 10.606000] ==⇒ Activate Deep Green Mode [ 10.614000] Wifi Forwarding Driver is initialized! [ 10.660000] Initializing WLCSM Module [ 10.663000] WLCSM Module loaded successfully [ 11.473000] –SMP support [ 11.474000] wl: dsl_tx_pkt_flush_len=338 [ 11.474000] wl: norm_wmark_tot=26926, pktc_wmark_tot=26926 [ 11.475000] Dongle chip:0xaa52 quit wl.ko to be loaded with DHD. [ 11.476000] Dongle chip:0x4365 quit wl.ko to be loaded with DHD. [ 11.487000] DHD_FKB_POOL size is:1280 and entry size:2592 [ 11.488000] fkbpool address range: d4c00000 ↔ d4f2a000 [ 11.489000] DHD_PKTTAG POOL size is:1280 and entry size:64 [ 11.490000] dhd_module_init in [ 11.491000] dhd_queue_budget = 256 [ 11.492000] dhd_sta_threshold = 2048 [ 11.493000] dhd_if_threshold = 65536 [ 11.494000] no wifi platform data, skip [ 11.495000] PCI_PROBE: bus 1, slot 0,vendor 14E4, device AA52(good PCI location) [ 11.496000] dhdpcie_init: can't find adapter info for this chip [ 11.497000] pcieh 0000:01:00.0: enabling device (0140 → 0142) [ 11.613000] DHD: dongle ram size is set to 983040(orig 983040) at 0x180000 [ 11.620000] dhd:0: fw path:/etc/wlan_dhd nv path:(null) [ 11.625000] RDPA returned tx wakeup reg = <0x80299004>, val = <0x10000000> [ 11.632000] RDPA returned rx wakeup reg = <0x8029a004>, val = <0x28000000> [ 11.640000] dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024 [ 11.650000] dhd_prealloc_attach: pre-allocated buffer mode is disabled (allocskbsz=0) [ 11.658000] dhd_attach(): thread:dhd_watchdog_thread:1b2 started [ 11.664000] dhd_attach(): thread:dhd0_dpc:1b3 started [ 11.669000] dhd_deferred_work_init: work queue initialized [ 11.674000] Creating CPU ring for queue number 0 with 1024 packets descriptor=0xbf1f37bc Creating CPU ring for queue number 1 with 1024 packets descriptor=0xbf1f37d8

wfd_bind: Dev wl%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3

[ 11.690000] Instantiating WFD 0 thread [ 11.707000] dhd:0: fw path:/etc/wlan_dhd nv path:(null) [ 11.712000] dhd_bus_download_firmware: firmware path=/etc/wlan_dhd, nvram path= [ 11.719000] update_firmware_path: pfw_path = /etc/wlan_dhd [ 11.725000] dhdpcie_ramsize_adj: Enter [ 11.833000] dhdpcie_download_code_file: download firmware /etc/wlan_dhd/43602a3/rtecdc.bin [ 11.900000] wl:srom/otp not programmed, using main memory mapped srom info(wombo board) [ 11.907000] wl: ID=pci/0/1/0/ [ 11.910000] wl: ID=pci/0/1/0/ [ 11.913000] wl: loading /etc/wlan/bcm43602_map.bin [ 11.939000] wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=19 [ 11.945000] Replace or append with internal Mac Address [ 11.951000] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded. [ 11.994000] PCIe shared addr (0x001b49d8) read took 35023 usec before dongle is ready [ 12.002000] DMA RX offset from shared Area 0 [ 12.006000] dhdpcie_readshared: Dongle advertizes 2 size indices [ 12.012000] dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it [ 12.021000] H2D DMA WR INDX : array size 416 = 2 * 198 [ 12.026000] D2H DMA RD INDX : array size 32 = 2 * 3 [ 12.031000] D2H DMA WR INDX : array size 32 = 2 * 3 [ 12.036000] H2D DMA RD INDX : array size 416 = 2 * 198 [ 12.042000] ring_info_raw: 56 [ 12.045000] 88 9e 26 00 18 ab 26 00 a4 ac 26 00 30 ae 26 00 [ 12.051000] 36 ae 26 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.056000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.062000] 00 00 00 00 c6 00 00 00 [ 12.066000] dhdpcie_readshared: max H2D queues 198 [ 12.071000] dhd_bus_start: Initializing 198 h2drings [ 12.081000] dhd_runner_flowmgr_init: bootmem name<dhd0> addr<cc000000> size<11534336> [ 12.088000] dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 01:0512 [ 12.097000] dhd_runner_policy_init: N+M Policy = 0 1 (HW) [ 12.103000] dhd_bus_cmn_writeshared: [ 12.106000] 0000: 00 70 11 16 00 00 00 00 [ 12.111000] dhd_bus_cmn_writeshared: [ 12.114000] 0000: 00 00 a6 00 00 00 00 00 [ 12.119000] dhd_bus_cmn_writeshared: [ 12.122000] 0000: 00 00 30 15 00 00 00 00 [ 12.127000] dhd_bus_cmn_writeshared: [ 12.130000] 0000: 00 40 4f 00 00 00 00 00 [ 12.135000] dhd_bus_cmn_writeshared: [ 12.138000] 0000: 00 80 a6 00 00 00 00 00 [ 12.143000] dhd_bus_cmn_writeshared: [ 12.146000] 0000: 00 00 40 15 00 00 00 00 [ 12.151000] dhd_bus_cmn_writeshared: [ 12.155000] 0000: 00 10 14 00 [ 12.158000] dhd_bus_cmn_writeshared: [ 12.162000] 0000: 00 c8 2d 15 00 00 00 00 [ 12.166000] dhd_bus_cmn_writeshared: [ 12.170000] 0000: 00 cc 2d 15 00 00 00 00 [ 12.174000] dhd_bus_cmn_writeshared: [ 12.178000] 0000: 00 c0 2d 15 00 00 00 00 [ 12.182000] dhd_bus_cmn_writeshared: [ 12.186000] 0000: 00 c4 2d 15 00 00 00 00 [ 12.190000] Attach flowrings pool for 196 rings [ 12.195000] Runner DHD PCIE: vendor<0x14e4> device<0xaa52> bus<1> slot<0> [ 12.203000] Initial configuration [ 12.206000]

[ 12.211000] rx_post_flow_ring_base_addr : c0a60000 [ 12.216000] tx_post_flow_ring_base_addr : cbfc4000 [ 12.221000] rx_complete_flow_ring_base_addr : c0a68000 [ 12.226000] tx_complete_flow_ring_base_addr : c04f4000 [ 12.232000] [ 12.233000] r2d_wr_arr_base_addr : e1669000 [ 12.238000] d2r_rd_arr_base_addr : e1669402 [ 12.242000] r2d_rd_arr_base_addr : e1669c00 [ 12.246000] d2r_wr_arr_base_addr : e1669802 [ 12.251000] tx_post_mgmt_arr_base_addr : e166a000 [ 12.256000] tx_post_mgmt_arr_base_phys_addr : 0x152dd000 [ 12.261000] [ 12.263000] r2d_wr_arr_base_phys_addr : 0x152dc000 [ 12.268000] d2r_rd_arr_base_phys_addr : 0x152dc402 [ 12.273000] r2d_rd_arr_base_phys_addr : 0x152dcc00 [ 12.278000] d2r_wr_arr_base_phys_addr : 0x152dc802 [ 12.283000] [ 12.284000] Doorbell ISR : bf635a84 [ 12.288000] Doorbell CTX : d613f600 [ 12.292000] Creating CPU ring for queue number 7 with 128 packets descriptor=0xbef42230, size_of_entry 16 [ 12.302000] Done initializing Ring 7 Base=0xe0822000 End=0xe0822800 calculated entries= 128 RDD Base=c1e000K descriptor=0xbef42230 [ 12.314000] Runner DHD Offload initialization complete [ 12.322000] CUR_ETHERADDR : 6 [ 12.323000] 20 b0 01 8c 65 29 [ 12.326000] dhd_sync_with_dongle: GET_REVINFO device 0x43bb, vendor 0x14e4, chipnum 0xaa52 [ 12.331000] [ 12.331000] Dongle Host Driver, version 7.14.164.19.cpe5.02L03.0-kdb [ 12.335000] wfd_registerdevice Successfully registered dev wl0 ifidx 0 wfd_idx 0 [ 12.336000] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4365(good PCI location) [ 12.337000] dhdpcie_init: can't find adapter info for this chip [ 12.338000] pcieh 0001:01:00.0: enabling device (0140 → 0142) [ 12.457000] DHD: dongle ram size is set to 1835008(orig 1835008) at 0x200000 [ 12.458000] dhd:1: fw path:/etc/wlan_dhd nv path:(null) [ 12.459000] RDPA returned tx wakeup reg = <0x80299004>, val = <0x11000000> [ 12.460000] RDPA returned rx wakeup reg = <0x8029a004>, val = <0x29000000> [ 12.460000] dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024 [ 12.464000] dhd_prealloc_attach: pre-allocated buffer mode is disabled (allocskbsz=0) [ 12.465000] dhd_attach(): thread:dhd_watchdog_thread:1c0 started [ 12.466000] dhd_attach(): thread:dhd1_dpc:1c1 started [ 12.467000] dhd_deferred_work_init: work queue initialized [ 12.468000] Creating CPU ring for queue number 2 with 1024 packets descriptor=0xbf1f37f4 Creating CPU ring for queue number 3 with 1024 packets descriptor=0xbf1f3810

wfd_bind: Dev wl%d wfd_idx 1 wl_radio_idx 1 Type fkb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc

[ 12.471000] dhd:1: fw path:/etc/wlan_dhd nv path:(null) [ 12.471000] Instantiating WFD 1 thread [ 12.473000] dhd_bus_download_firmware: firmware path=/etc/wlan_dhd, nvram path= [ 12.474000] update_firmware_path: pfw_path = /etc/wlan_dhd [ 12.475000] dhdpcie_ramsize_adj: Enter [ 12.524000] CONSOLE: hndarm_armr addr: 0x18002000, cr4_idx: 0 [ 12.529000] CONSOLE: 000000.001 [ 12.532000] CONSOLE: RTE (PCIE-MSG_BUF) 7.76.5 (r698973) on BCM43602 r3 @ 40.0/160.0/160.0MHz [ 12.541000] CONSOLE: 000000.002 allocating a max of 511 rxcplid buffers [ 12.548000] CONSOLE: 000000.003 pciemsgbuf0: Broadcom PCIE MSGBUF driver [ 12.555000] CONSOLE: 000000.005 reclaim section 0: Returned 48388 bytes to the heap [ 12.563000] CONSOLE: 000000.025 wl0: wlc_stf_txcore_shmem_write: No clock [ 12.570000] CONSOLE: 000000.030 wl0: Broadcom BCM43602 802.11 Wireless Controller 7.76.5 (r698973) [ 12.579000] CONSOLE: 000000.030 TCAM: 256 used: 56 exceed:0 [ 12.585000] CONSOLE: 000000.031 reclaim section 1: Returned 143420 bytes to the heap [ 12.593000] CONSOLE: [ 12.643000] dhdpcie_ramsize_adj: Adjust dongle RAMSIZE to 0x240000 [ 12.649000] dhdpcie_download_code_file: download firmware /etc/wlan_dhd/4366c0/rtecdc.bin [ 13.003000] wl:srom/otp not programmed, using main memory mapped srom info(wombo board) [ 13.004000] wl: ID=pci/1/1/0/ [ 13.005000] wl: ID=pci/1/1/0/ [ 13.033000] wl: loading /etc/wlan/bcm43664_map.bin [ 13.040000] wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=19 [ 13.041000] wl: reading /etc/wlan/bcm43664_nvramvars.bin, file size=173 [ 13.042000] Replace or append with internal Mac Address [ 13.045000] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded. [ 13.100000] PCIe shared addr (0x002a165c) read took 54023 usec before dongle is ready [ 13.101000] DMA RX offset from shared Area 0 [ 13.102000] dhdpcie_readshared: Dongle advertizes 2 size indices [ 13.103000] dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it [ 13.104000] H2D DMA WR INDX : array size 544 = 2 * 266 [ 13.105000] D2H DMA RD INDX : array size 32 = 2 * 3 [ 13.106000] D2H DMA WR INDX : array size 32 = 2 * 3 [ 13.106000] H2D DMA RD INDX : array size 544 = 2 * 266 [ 13.107000] ring_info_raw: 56 [ 13.108000] d4 6a 43 00 a4 7b 43 00 b8 7d 43 00 cc 7f 43 00 [ 13.113000] d2 7f 43 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.118000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.123000] 00 00 00 00 0a 01 00 00 [ 13.126000] dhdpcie_readshared: max H2D queues 266 [ 13.127000] dhd_bus_start: Initializing 266 h2drings [ 13.134000] dhd_runner_flowmgr_init: bootmem name<dhd1> addr<cb200000> size<14680064> [ 13.135000] dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 01:0512 [ 13.136000] dhd_runner_policy_init: N+M Policy = 0 1 (HW) [ 13.137000] dhd_bus_cmn_writeshared: [ 13.138000] 0000: 00 d0 00 18 00 00 00 00 [ 13.139000] dhd_bus_cmn_writeshared: [ 13.140000] 0000: 00 00 a7 00 00 00 00 00 [ 13.141000] dhd_bus_cmn_writeshared: [ 13.142000] 0000: 00 a0 17 16 00 00 00 00 [ 13.143000] dhd_bus_cmn_writeshared: [ 13.144000] 0000: 00 80 a7 00 00 00 00 00 [ 13.145000] dhd_bus_cmn_writeshared: [ 13.146000] 0000: 00 00 a8 00 00 00 00 00 [ 13.147000] dhd_bus_cmn_writeshared: [ 13.148000] 0000: 00 00 20 16 00 00 00 00 [ 13.149000] dhd_bus_cmn_writeshared: [ 13.150000] 0000: 00 10 14 00 [ 13.151000] dhd_bus_cmn_writeshared: [ 13.152000] 0000: 00 88 21 15 00 00 00 00 [ 13.153000] dhd_bus_cmn_writeshared: [ 13.154000] 0000: 00 8c 21 15 00 00 00 00 [ 13.154000] dhd_bus_cmn_writeshared: [ 13.155000] 0000: 00 80 21 15 00 00 00 00 [ 13.155000] dhd_bus_cmn_writeshared: [ 13.156000] 0000: 00 84 21 15 00 00 00 00 [ 13.157000] Attach flowrings pool for 264 rings [ 13.158000] Runner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0> [ 13.158000] Initial configuration [ 13.159000]

[ 13.160000] rx_post_flow_ring_base_addr : c0a70000 [ 13.161000] tx_post_flow_ring_base_addr : cb1c4000 [ 13.162000] rx_complete_flow_ring_base_addr : c0a80000 [ 13.163000] tx_complete_flow_ring_base_addr : c0a78000 [ 13.164000] [ 13.165000] r2d_wr_arr_base_addr : e1679000 [ 13.166000] d2r_rd_arr_base_addr : e1679402 [ 13.166000] r2d_rd_arr_base_addr : e1679c00 [ 13.167000] d2r_wr_arr_base_addr : e1679802 [ 13.168000] tx_post_mgmt_arr_base_addr : e167a000 [ 13.169000] tx_post_mgmt_arr_base_phys_addr : 0x15219000 [ 13.170000] [ 13.171000] r2d_wr_arr_base_phys_addr : 0x15218000 [ 13.172000] d2r_rd_arr_base_phys_addr : 0x15218402 [ 13.173000] r2d_rd_arr_base_phys_addr : 0x15218c00 [ 13.174000] d2r_wr_arr_base_phys_addr : 0x15218802 [ 13.175000] [ 13.176000] Doorbell ISR : bf635a84 [ 13.176000] Doorbell CTX : d758aa00 [ 13.177000] Creating CPU ring for queue number 1 with 128 packets descriptor=0xbef42038, size_of_entry 16 [ 13.178000] Done initializing Ring 1 Base=0xe0830000 End=0xe0830800 calculated entries= 128 RDD Base=c2c000K descriptor=0xbef42038 [ 13.179000] Runner DHD Offload initialization complete [ 13.181000] CUR_ETHERADDR : 6 [ 13.184000] 22 b0 01 8c 65 31 [ 13.187000] dhd_sync_with_dongle: GET_REVINFO device 0x43c5, vendor 0x14e4, chipnum 0xaa90 [ 13.197000] [ 13.197000] Dongle Host Driver, version 7.14.164.19.cpe5.02L03.0-kdb [ 13.207000] wfd_registerdevice Successfully registered dev wl1 ifidx 0 wfd_idx 1 [ 13.214000] Broadcom PCI Device 0x6313 has allocated with driver pcieport [ 13.221000] Broadcom PCI Device 0x6313 has allocated with driver pcieport [ 13.231000] dhd_module_init out [ 13.240000] bcmxtmcfg: bcmxtmcfg_init entry [ 13.249000] adsl: adsl_init entry [ 13.258000] usbcore: registered new interface driver usbserial [ 13.259000] usbcore: registered new interface driver GobiSerial [ 13.261000] usbserial: USB Serial support registered for GobiSerial [ 13.262000] GobiSerial: 2015-08-27/SWI_2.25:GobiSerial [ 13.266000] [DSPHAL] dsphal_init: Starting DSPHAL driver. [ 13.267000] [DSPHAL] Retrieving VoiceParms boardIdStr: VCNT-I baseBoardIdStr: VCNT-I ret: 0

[ 13.300000] [DSPHAL] pcm_clk_init: starting PCM clock [ 13.301000] [DSPHAL] pcm_nco_mux_cfg: using MISC for NCO FCW [ 13.302000] [DSPHAL] pcm_nco_init: PCM clock in normal mode [ 13.303000] [DSPHAL] pcm_nco_init: loading MISC FCW to PCM NCO: 0xa7c5ac47 [ 13.304000] [DSPHAL] dh_configure_channel: device 0, channel 0, id 0, devType 10, intfType 0, status 0, chanType 0, rate 8000 Hz, comp 0 [ 13.304000] [DSPHAL] pcm_config_channel: channel 0 [ 13.305000] [DSPHAL] pcm_ts_alloc: DMA 4 timeslot [8-bit 0, 16-bit 0] assigned to channel 0 as buffer channel 0 [ 13.306000] [DSPHAL] pcm_ts_alloc: DMA 5 timeslot [8-bit 0, 16-bit 0] assigned to channel 0 as buffer channel 0 [ 13.307000] [DSPHAL] pcm_ts_alloc: DMA 4 timeslot [8-bit 1, 16-bit 0] assigned to channel 0 as buffer channel 0 [ 13.308000] [DSPHAL] pcm_ts_alloc: DMA 5 timeslot [8-bit 1, 16-bit 0] assigned to channel 0 as buffer channel 0 [ 13.309000] [DSPHAL] dh_configure_channel: device 0, channel 1, id 1, devType 10, intfType 0, status 0, chanType 0, rate 8000 Hz, comp 0 [ 13.310000] [DSPHAL] pcm_config_channel: channel 1 [ 13.310000] [DSPHAL] pcm_ts_alloc: DMA 4 timeslot [8-bit 2, 16-bit 1] assigned to channel 1 as buffer channel 1 [ 13.311000] [DSPHAL] pcm_ts_alloc: DMA 5 timeslot [8-bit 2, 16-bit 1] assigned to channel 1 as buffer channel 1 [ 13.312000] [DSPHAL] pcm_ts_alloc: DMA 4 timeslot [8-bit 3, 16-bit 1] assigned to channel 1 as buffer channel 1 [ 13.313000] [DSPHAL] pcm_ts_alloc: DMA 5 timeslot [8-bit 3, 16-bit 1] assigned to channel 1 as buffer channel 1 [ 13.318000] [SLICSLAC] slicslac_init: Starting SLIC/SLAC driver. [ 13.321000] jnl: driver (9.4.4 9.4.4, LBD=ON) loaded at bf7ca000 [ 13.331000] ufsd: driver (9.4.4 9.4.4, ioctl, sd2(5), car) loaded at bf7d9000 [ 13.331000] NTFSJ support included [ 13.331000] Hfs+ support included [ 13.338000] usbcore: registered new interface driver cdc_acm [ 13.339000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 13.341000] usbcore: registered new interface driver cdc_wdm [ 13.346000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.351000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 13.402000] nf_conntrack version 0.5.0 (6803 buckets, 27212 max) [ 13.430000] CONSOLE: 000000.000 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.431000] CONSOLE: 000000.000 initvars_cis_pci: Not CIS format [ 13.432000] CONSOLE: 000000.000 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.435000] CONSOLE: 000000.000 ipxotp_read_region: h/w region not programmed [ 13.437000] ctnetlink v0.93: registering with nfnetlink. [ 13.439000] nf_conntrack_rtsp v0.7 loading [ 13.451000] CONSOLE: 000000.000 Neither SPROM nor OTP has valid image [ 13.458000] CONSOLE: 000000.000 srom rev:0 [ 13.462000] CONSOLE: 000000.000 initvars_srom_pci, SROM CRC Error [ 13.468000] CONSOLE: 000000.000 initvars_srom_pci, Using external nvram [ 13.475000] CONSOLE: 000000.000 Setting clocks to 800/400/200 [ 13.479000] nf_nat_rtsp v0.7 loading [ 13.485000] CONSOLE: 000000.000 si_set_bb_vcofreq_frac: only work on 4360, 4350 [ 13.492000] CONSOLE: 000000.000 Enabling D-cache [ 13.497000] CONSOLE: 026738.568 gic_dist_init max_irq 64 [ 13.502000] CONSOLE: 026738.569 c_init: Watchdog reset bit set, clearing [ 13.506000] xt_time: kernel timezone is -0000 [ 13.507000] usbcore: registered new interface driver cdc_ether [ 13.509000] usbcore: registered new interface driver cdc_ncm [ 13.510000] usbcore: registered new interface driver huawei_cdc_ncm [ 13.517000] usbcore: registered new interface driver option [ 13.517000] usbserial: USB Serial support registered for GSM modem (1-port) [ 13.518000] usbcore: registered new interface driver qcserial [ 13.519000] usbserial: USB Serial support registered for Qualcomm USB modem [ 13.520000] usbcore: registered new interface driver qmi_wwan [ 13.521000] kmodloader: done loading kernel modules from /etc/modules.d/* [ 13.571000] CONSOLE: 026738.569 [ 13.574000] CONSOLE: RTE (PCIE-MSG_BUF) 10.10.122.22 (r696077) on BCM43664 r4 @ 40.0/200.0/800.0MHz [ 13.584000] CONSOLE: 026738.569 nvram_init: called again without calling nvram_exit() [ 13.585000] CONSOLE: 026738.569 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.586000] CONSOLE: 026738.569 initvars_cis_pci: Not CIS format [ 13.587000] CONSOLE: 026738.569 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.588000] CONSOLE: 026738.569 ipxotp_read_region: h/w region not programmed [ 13.589000] CONSOLE: 026738.569 Neither SPROM nor OTP has valid image [ 13.590000] CONSOLE: 026738.569 srom rev:0 [ 13.591000] CONSOLE: 026738.569 initvars_srom_pci, SROM CRC Error [ 13.592000] CONSOLE: 026738.569 initvars_srom_pci, Using external nvram [ 13.593000] CONSOLE: 026738.569 allocating a max of 511 rxcplid buffers [ 13.593000] CONSOLE: 026738.570 pciemsgbuf0: Broadcom PCIE MSGBUF driver [ 13.594000] CONSOLE: 026738.570 nvram_init: called again without calling nvram_exit() [ 13.594000] CONSOLE: 026738.570 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.595000] CONSOLE: 026738.570 initvars_cis_pci: Not CIS format [ 13.596000] CONSOLE: 026738.570 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.597000] CONSOLE: 026738.570 ipxotp_read_region: h/w region not programmed [ 13.598000] CONSOLE: 026738.570 Neither SPROM nor OTP has valid image [ 13.599000] CONSOLE: 026738.570 srom rev:0 [ 13.599000] CONSOLE: 026738.570 initvars_srom_pci, SROM CRC Error [ 13.600000] CONSOLE: 026738.570 initvars_srom_pci, Using external nvram [ 13.601000] CONSOLE: 026738.570 wlc_ucode_download: wl0: Loading non-MU ucode [ 13.602000] CONSOLE: 026738.571 reclaim section 0: Returned 216 bytes to the heap [ 13.603000] CONSOLE: 026738.571 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.604000] CONSOLE: 026738.571 initvars_cis_pci: Not CIS format [ 13.605000] CONSOLE: 026738.572 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.605000] CONSOLE: 026738.572 ipxotp_read_region: h/w region not programmed [ 13.606000] CONSOLE: 026738.572 Neither SPROM nor OTP has valid image [ 13.606000] CONSOLE: 026738.572 srom rev:0 [ 13.607000] CONSOLE: 026738.572 initvars_srom_pci, SROM CRC Error [ 13.608000] CONSOLE: 026738.572 initvars_srom_pci, Using external nvram [ 13.609000] CONSOLE: 026738.572 wlc_bmac_attach, deviceid 0x43c5 nbands 1 [ 13.610000] CONSOLE: 026738.581 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000 [ 13.611000] CONSOLE: 026738.581 wl1: wlc_bmac_attach: chiprev 4 corerev 65 cccap 0x58400009 maccap 0xf0018705 band 5G, phy_type 11 phy_rev 33 [ 13.612000] CONSOLE: 026738.581 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0 [ 13.613000] CONSOLE: 026738.581 enable 1: q0 frmcnt 0, wrdcnt 0, q1 frmcnt 0, wrdcnt 0 [ 13.613000] CONSOLE: 026738.582 wl1: wlc_stf_txcore_shmem_write: No clock [ 13.613000] CONSOLE: 026738.583 wl1: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512 [ 13.614000] CONSOLE: 026738.585 wl_eventq_dup_event: wl_eventq not initialized [ 13.615000] CONSOLE: 026738.585 wl_eventq_dup_event: wl_eventq not initialized [ 13.616000] CONSOLE: 026738.585 wl1: Broadcom BCM43664 802.11 Wireless Controller 10.10.122.22 (r696077) [ 13.617000] CONSOLE: 026738.585 SPLITRX_MODE_2 enabled : tcmsegsize 160 [ 13.618000] CONSOLE: 026738.585 TCAM: 512 used: 257 exceed:0 [ 13.619000] CONSOLE: 026738.585 reclaim section 1: Returned 180964 bytes to the heap [ 13.620000] CONSOLE: 026738.586 ThreadX v5.6 initialized [ 13.620000] CONSOLE: [ 13.621000] CONSOLE: 026738.931 wl1: wlc_enable_probe_req: state down, deferring setting of host flags [ 13.622000] CONSOLE: 026738.931 wl1: wlc_enable_probe_req: state down, deferring setting of host flags Note: Loading 6300 MDK (default) driver for 0 chip Switch MDK: num_switches = 1 [63100] Switch MDK: unit = 1; phy_pbmp = 0xf; config_pbmp = 0xf nophy_pbmp = 0x0 Switch MDK link poll thread: unit=1; phypbmp=0xf config_pbmp=0xf Checking country codes in /etc/wlan/brcm_country_map_2G (wl0) Checking E0/784 –> OK Checking Q1/45 –> OK Checking country codes in /etc/wlan/brcm_country_map_5G (wl1) Checking E0/784 –> OK Checking Q1/45 –> OK Updating radar thresholds Hostapd starting… (1) Hostapd starting… (2)


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
inbox/toh/sercomm/sercomm_vox30_v1.txt · Last modified: 2020/09/25 13:58 by jamesmacwhite