Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:netgear:netgear_rax120_nighthawk_ax12 [2020/09/02 16:36] – [Netgear RAX120 (Nighthawk AX12)] hnymaninbox:toh:netgear:netgear_rax120_nighthawk_ax12 [2024/03/13 22:52] – [TTL + USB method] ywang
Line 1: Line 1:
-====== Netgear RAX120 (Nighthawk AX12) ====== +====== Netgear RAX120v2 (Nighthawk AX12) ======
-~~NOTOC~~+
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page */+{{ media:netgear:rax120:rax120.png?200|Netgear RAX120}}
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+The RAX120v2 is an 802.11ax OFDMA and MU-MIMO Dual-Band WiFi router, which has the following WiFi Interfaces.:
  
-A 802.11ax Wi-Fi6 device with a quad-core IPQ8074A chip, uses ath11k wifi driver.+  * one 2.4GHz (QCN9024 4x4 ax) 
 +  * two 5GHz (QCN5024 4x4 ax + QCN9024 2x2/4x4 ax)
  
-/*****/ +The radios support up to 4K QAM (through MCS0 - MCS15), for devices and paths that are compatible with those high-density modulations. Supports DFS channels, from channel 36 up to 165 (may vary on each region). 12 antenna chains operate in a two radio configuration as 8x8 in 5 GHz and 4x4 in 2.4 GHz.
-/* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki */ +
-/*****/+
  
-{{ media:netgear:netgear_rax120.jpg?200|Netgear RAX120}}+This is a router based on a Qualcomm IPQ8074 4-core SoC (up to 2.2GHz).
  
-====== Netgear RAX120 ====== +It has 4 1G LAN ports, 1 1G WAN port, and a 2.5G/5G LAN port (Aquantia AQR111).
-~~NOTOC~~+
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ 
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+This device has 2 HW versions. V2 hardware is required. 
  
-/*****/ +===== Supported Versions ===== 
-/* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki *+<!-- ToH: { 
-/*****+  "source": "json", 
-...+  "dom": "t", 
 +  "paging": false, 
 +  "rotate": true, 
 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "owrt_forum_topic_url", "deviceid"], 
 +  "filterColumns": {"brand": "^NETGEAR$", "model": "^RAX120$"
 +} --> 
 + 
 +===== Hardware highlights ===== 
 +<!-- ToH: { 
 +  "source": "json", 
 +  "dom": "t", 
 +  "paging": false, 
 +  "rotate": true, 
 +  "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet1gports"], 
 +  "filterColumns": {"brand": "^NETGEAR$", "model": "^RAX120$"
 +} --> 
 + 
 +==== Info ==== 
 +^ [[wp>Instruction set|Architecture]]          | [[wp>ARM architecture|ARM]]           | 
 +^ Vendor                                       | [[wp>Qualcomm|Qualcomm]]              | 
 +^ [[docs:techref:Bootloader]]                  | SBL (?)                               | 
 +^ [[docs:techref:hardware:soc|System-On-Chip]] | Qualcomm IPQ8074 (or 8074A ??)        | 
 +^ [[docs:techref:hardware:cpu|CPU]]/Speed      | Cortex-A53 @ 2.0 GHz                  | 
 +^ Flash-Chip                                   | Winbond W29N04GZBIBA                  | 
 +^ Flash size                                   | 512 MiB                               | 
 +^ RAM                                          | 1024 MiB                              | 
 +^ Wireless 2.4 GHz                             | Qualcomm QCN5024, b/g/n/ax, 4x4:4     | 
 +^ Wireless 5 GHz                               | 2x Qualcomm QCN5054, a/n/ac/ax, 8x8:8 | 
 +^ Ethernet                                     | 10/100/1000 Mbit/s, 5 Gbit/s WAN      | 
 +^ Switch                                       | Qualcomm Atheros IPQ8074              | 
 +^ Serial                                       | [[#Serial|Yes]]                       | 
 +^ Power                                        | External, 19 V 3.16 A                 |
  
  
 ===== OpenWrt support ===== ===== OpenWrt support =====
  
-<color red>**Not supported.**</color>+<!-- ToH: { 
 +  "source": "json", 
 +  "dom": "t", 
 +  "paging": false, 
 +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"], 
 +  "filterColumns": {"brand": "^NETGEAR$", "model": "^RAX120$"
 +} -->
  
  
Line 35: Line 68:
 //Describe if there are any ongoing activities that might lead to OpenWrt support.// //Describe if there are any ongoing activities that might lead to OpenWrt support.//
  
-/*** +Enable telnet with magic packet:  [[https://github.com/Red54/telnetenable-r9000]]
-  * OpenWrt forum thread: [[https://forum.openwrt.org/t/adding-openwrt-support-for-ax3600/55049]] +
-***/+
  
-/*** if info availableuncomment and fill in +OpenWrt forum thread[[https://forum.openwrt.org/t/adding-openwrt-support-for-netgear-rax120-nighthawk-ax12/75592]]
-===== Experimental firmware =====+
  
-//List experimental firmware download links here.// 
  
-//None at this time.//+===== Experimental firmware (RAX120v2 only)=====
  
-  * External image (add link) +There is an experimental fork of OpenWrt that supports this device at : https://github.com/boretom/openwrt-fork/tree/rax120v2/jewwest-based-pr 
-  * trunk image (add link) +or https://github.com/jewwest/openwrt/tree/master (no activity since mid January 2023)
-  * ..+
-***/+
  
 +==== Build and Install ==== 
  
-===== Hardware highlights ===== +===Build=== 
-^ CPU                        ^ Ram      ^ Flash   ^ WLAN2.4     ^ WLAN5.0   ^ USB  +  - Setup build environment:<code> 
-| Qualcomm Atheros IPQ8074A @ 2.0 GHz |  1024 Mib|512 MiB  |  b/g/n  |  an/ac/ax  |+git clone https://github.com/boretom/openwrt-fork.git 
 +cd openwrt 
 +git checkout rax120v2/jewwest-based-pr 
 +./scripts/feeds update -a 
 +./scripts/feeds install -a 
 +</code> 
 +  - Run ''make menuconfig'', select:<code> 
 +Base System: 
 +Target-System ---> Qualcomm Atheros 802.11ax WiSoC-s 
 +Subtarget     ---> Qualcomm Atheros IPQ807x 
 +Target-Profile ---> Netgear RAX120v2
  
 +Add other components as desired.. Example: Luci
 +</code>
 +Multi-Gig Support: See further down in the 'Install' section
  
 +  - run ''make'' (or to get less random compilation issues try ''make -j$(nproc) toolchain/install'' followed by ''make -j$(nproc) world'')
 +  - After build finished, generated firmware will be at ''bin/targets/qualcommax/ipq807x''.
 +
 +===Install===
 +<tabbox From OEM Firmware>
 +1. In the Netgear Stock GUI flash openwrt-qualcommax-ipq807x-netgear_rax120v2-squashfs-web-ui-factory.img
 +
 +2. Open Luci administration and flash sysupgrade image - openwrt-qualcommax-ipq807x-netgear_rax120v2-squashfs-sysupgrade.bin
 +<tabbox From TFTP / initramfs>
 +1. Setup TFTP server at 192.168.1.10.
 +
 +2.  Stop autoboot and run.
 +<code>
 +tftpboot openwrt-qualcommax-ipq807x-netgear_rax120v2-initramfs-uImage.itb
 +bootm
 +</code>
 +3. Open Luci administration and flash sysupgrade image - openwrt-qualcommax-ipq807x-netgear_rax120v2-squashfs-sysupgrade.bin
 +
 +OpenWRT is now installed
 +</tabbox>
 +===Aquantia 2.5G/5G LAN===
 +For the 5G port labeled 'lan5' to work a firmware is needed. This can be loaded in
 +u-boot by writing the firmware to the correct mtd partition.
 +
 +The firmware file found in the Netgear stock firmware under ''/lib/firmware/'' named
 +''AQR-G3_v4.3.C-AQR_DNI_DR-EQ35AX8-R-prov1_ID23888_VER1311.cld'' is needed and has to
 +be converted to a MBN file.
 +
 +The ''mkheader.py'' script used here can be found in the Netgear V1.2.8.40 GPL source,
 +under ''git_home/u-boot.git/tools/mkheader.py''.
 +
 +Convert the CLD file to MBN using:
 +    $ python2 mkheader.py 0x44000000 0x13 <*.cld file> aqr_4.3.C.mbn
 +
 +This MBN file can then be flashed to the MTD partition to be used by u-boot.
 +
 +The necessary files can also be found in
 +    https://github.com/boretom/openwrt-fork/tree/rax120v2/aquantia-firmware
 +
 +===Write MBN file to MTD partition to be loaded automatically by u-boot===
 +
 +U-boot automatically tries to load the firmware from nand at address 0x7e00000 which
 +corresponds to ''/dev/mtd25'' in OpenWrt.
 +
 +1. find ETHPHYFW partition while running OpenWrt (expected: /dev/mtd25)
 +
 +  $ fgrep -i 'ethphyfw' /proc/mtd
 +  mtd25: 00080000 00020000 "ethphyfw
 +
 +2. copy mbn file to /tmp/ folder of the router
 +
 +  $ scp aqr-v4.3.C.mbn 192.168.1.1:/tmp/
 +
 +3. write mbn file to ethphyfw partition
 +
 +  $ mtd write /tmp/aqr_v4.3.C.mbn /dev/mtd25
 +
 +=== (Outdated) Install firmware using aq-fw-download tool
 + - Download firmware.
 +<code>
 +wget -O /lib/firmware/ https://github.com/jewwest/openwrt/releases/download/ipq807x-latest/AQR-G3_v4.3.C-AQR_DNI_DR-EQ35AX8-R-prov1_ID23888_VER1311.cld
 +</code>
 + - Create init.d script to load the firmware and set link speed at boot. 
 +<code>vi /etc/init.d/aqr111</code>
 +<code>
 +#!/bin/sh /etc/rc.common
 +
 +START=25
 +
 +boot() {
 + aq-fw-download /lib/firmware/AQR-G3_v4.3.C-AQR_DNI_DR-EQ35AX8-R-prov1_ID23888_VER1311.cld lan5 7
 + ethtool -s lan5 advertise 0x1000000000000 
 + ssdk_sh debug phy set 7 0x4004c441 0x8
 + echo "Aquantia Interface Set to 5G"
 +}
 +</code>
 +<code>
 +chmod +x /etc/init.d/aqr111
 +/etc/init.d/aqr111 enable
 +</code>
 /*** if info available: uncomment and fill in /*** if info available: uncomment and fill in
 ===== Installation ===== ===== Installation =====
Line 85: Line 206:
  
  
- 
- 
-==== Buttons ==== 
--> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). 
-Here, we merely name the buttons, so we can use them in the above Howto. 
- 
-Wifi, WPS, reset 
- 
- 
-===== Hardware ===== 
-==== Info ==== 
-^ Architecture     | ARMv8   (AArch64, Cortex-A53)            | 
-^ Vendor           | Qualcomm                                 | 
-^ Bootloader       | U-Boot                           | 
-^ System-On-Chip   | Qualcomm IPQ8074A                        | 
-^ CPU/Speed        | firmware up to 2.0GHz                    | 
-^ Flash-Chip       | Winbond W29N04GZBIBA                     | 
-^ Flash size       | 512 MiB                                  | 
-^ RAM              | 1024 MiB                                  | 
-^ Wireless         | 2xQCN5054 5.0GHz 802.11ax+ac+ax                 | 
-^          | QCN5024 2.4GHz 802.11bgn                 | 
-^ Ethernet         | 10/100/1000 Mbit/s, 5 Gbit/s WAN     | 
-^ Switch           | Qualcomm Atheros IPQ8074                 | 
-^ Serial           | [[#Serial|Yes]]                  | 
  
  
 ==== Flash Layout ==== ==== Flash Layout ====
  
-Flash layout in Original Netgear OEM FW:+<tabbox OEM Firmware>
 <code> <code>
- +0x000000000000-0x000000100000 : "0:SBL1" 
-[    4.261521] Creating 33 MTD partitions on "qcom_nand.0": +0x000000100000-0x000000200000 : "0:MIBIB" 
-[    4.267694] 0x000000000000-0x000000100000 : "0:SBL1" +0x000000200000-0x000000280000 : "0:BOOTCONFIG" 
-[    4.274085] 0x000000100000-0x000000200000 : "0:MIBIB" +0x000000280000-0x000000300000 : "0:BOOTCONFIG1" 
-[    4.278873] 0x000000200000-0x000000280000 : "0:BOOTCONFIG" +0x000000300000-0x000000600000 : "0:QSEE" 
-[    4.283510] 0x000000280000-0x000000300000 : "0:BOOTCONFIG1" +0x000000600000-0x000000900000 : "0:QSEE_1" 
-[    4.288894] 0x000000300000-0x000000600000 : "0:QSEE" +0x000000900000-0x000000980000 : "0:DEVCFG" 
-[    4.295927] 0x000000600000-0x000000900000 : "0:QSEE_1" +0x000000980000-0x000000a00000 : "0:DEVCFG_1" 
-[    4.301139] 0x000000900000-0x000000980000 : "0:DEVCFG" +0x000000a00000-0x000000a80000 : "0:APDP" 
-[    4.304527] 0x000000980000-0x000000a00000 : "0:DEVCFG_1" +0x000000a80000-0x000000b00000 : "0:APDP_1" 
-[    4.309632] 0x000000a00000-0x000000a80000 : "0:APDP" +0x000000b00000-0x000000b80000 : "0:RPM" 
-[    4.315115] 0x000000a80000-0x000000b00000 : "0:APDP_1" +0x000000b80000-0x000000c00000 : "0:RPM_1" 
-[    4.320054] 0x000000b00000-0x000000b80000 : "0:RPM" +0x000000c00000-0x000000c80000 : "0:CDT" 
-[    4.325005] 0x000000b80000-0x000000c00000 : "0:RPM_1" +0x000000c80000-0x000000d00000 : "0:CDT_1" 
-[    4.329782] 0x000000c00000-0x000000c80000 : "0:CDT" +0x000000d00000-0x000000d80000 : "0:APPSBLENV" 
-[    4.334992] 0x000000c80000-0x000000d00000 : "0:CDT_1" +0x000000d80000-0x000000e80000 : "0:APPSBL" 
-[    4.339688] 0x000000d00000-0x000000d80000 : "0:APPSBLENV" +0x000000e80000-0x000000f80000 : "0:APPSBL_1" 
-[    4.344892] 0x000000d80000-0x000000e80000 : "0:APPSBL" +0x000000f80000-0x000001000000 : "0:ART" 
-[    4.350576] 0x000000e80000-0x000000f80000 : "0:APPSBL_1" +0x000001000000-0x000001080000 : "0:ART.bak" 
-[    4.355624] 0x000000f80000-0x000001000000 : "0:ART" +0x000001080000-0x000001180000 : "config" 
-[    4.360777] 0x000001000000-0x000001080000 : "0:ART.bak" +0x000001180000-0x000001280000 : "boarddata1" 
-[    4.365362] 0x000001080000-0x000001180000 : "config" +0x000001280000-0x000001380000 : "boarddata2" 
-[    4.370869] 0x000001180000-0x000001280000 : "boarddata1" +0x000001380000-0x000001480000 : "pot" 
-[    4.376111] 0x000001280000-0x000001380000 : "boarddata2" +0x000001480000-0x000001980000 : "dnidata" 
-[    4.381391] 0x000001380000-0x000001480000 : "pot" +0x000001980000-0x000007d80000 : "firmware" 
-[    4.386704] 0x000001480000-0x000001980000 : "dnidata" +0x000001980000-0x000001f00000 : "kernel" 
-[    4.393785] 0x000001980000-0x000007d80000 : "firmware" +0x000001f00000-0x000007d80000 : "rootfs" 
-[    4.457441] 0x000001980000-0x000001f00000 : "kernel" +0x000007d80000-0x000008100000 : "language" 
-[    4.461195] 0x000001f00000-0x000007d80000 : "rootfs" +0x000008100000-0x000008200000 : "cert" 
-[    4.519947] mtd: device 26 (rootfs) set to be root filesystem +0x000008200000-0x000008280000 : "mtdoops" 
-[    4.520260] mtd: find squashfs magic at 0x1f00000 of qcom_nand.0 +0x000008280000-0x000008480000 : "router_analytics" 
-[    4.524666] mtd: find squashfs magic at 0x0 of rootfs +0x000008480000-0x00000e880000 : "ntgrdata" 
-[    4.530733] remap_blocks_in_rootfs_partition: remapped partition rootfs: 0x000001f00000-0x000007d80000 +0x00000e880000-0x000020000000 : "reserved"
-[    4.535694] create_block_mapping: create logic to physic blocks mapping for rootfs +
-[    4.603265] 0x000007d80000-0x000008100000 : "language" +
-[    4.605747] 0x000008100000-0x000008200000 : "cert" +
-[    4.608224] 0x000008200000-0x000008280000 : "mtdoops" +
-[    4.612706] 0x000008280000-0x000008480000 : "router_analytics" +
-[    4.618742] 0x000008480000-0x00000e880000 : "ntgrdata" +
-[    4.684990] 0x00000e880000-0x000020000000 : "reserved"+
 </code> </code>
 +<tabbox OpenWrt Firmware> 
 +<code> 
 +0x000000000000-0x000000100000 : "0:sbl1" 
 +0x000000100000-0x000000200000 : "0:mibib" 
 +0x000000200000-0x000000280000 : "0:bootconfig" 
 +0x000000280000-0x000000300000 : "0:bootconfig_1" 
 +0x000000300000-0x000000600000 : "0:qsee" 
 +0x000000600000-0x000000900000 : "0:qsee_1" 
 +0x000000900000-0x000000980000 : "0:devcfg" 
 +0x000000980000-0x000000a00000 : "0:devcfg_1" 
 +0x000000a00000-0x000000a80000 : "0:apdp" 
 +0x000000a80000-0x000000b00000 : "0:apdp_1" 
 +0x000000b00000-0x000000b80000 : "0:rpm" 
 +0x000000b80000-0x000000c00000 : "0:rpm_1" 
 +0x000000c00000-0x000000c80000 : "0:cdt" 
 +0x000000c80000-0x000000d00000 : "0:cdt_1" 
 +0x000000d00000-0x000000d80000 : "0:appsblenv" 
 +0x000000d80000-0x000000e80000 : "0:appsbl" 
 +0x000000e80000-0x000000f80000 : "0:appsbl_1" 
 +0x000000f80000-0x000001000000 : "0:art" 
 +0x000001000000-0x000001080000 : "0:art.bak" 
 +0x000001080000-0x000001180000 : "config" 
 +0x000001180000-0x000001280000 : "boarddata1" 
 +0x000001280000-0x000001380000 : "boarddata2" 
 +0x000001380000-0x000001480000 : "pot" 
 +0x000001480000-0x000001980000 : "dnidata" 
 +0x000001980000-0x000003680000 : "kernel" 
 +0x000007e00000-0x000007e80000 : "ethphyfw" 
 +0x00000e880000-0x000020000000 : "rootfs" 
 +</code> 
 +</tabbox>
  
 ==== Obtain SSH Access ==== ==== Obtain SSH Access ====
Line 173: Line 293:
 ==== Opening the case ==== ==== Opening the case ====
  
-...+The case bottom and cover are attached to each other really tightly, but the case can be opened once you figure out all necessary steps: 
 + 
 +  *The circuit board is attached to a heatsink that is attached to the top coverSo the bottom panel (with curvy sides) is the one to separate from the others. 
 +  *There are seven screws (Torx T-10) to be opened: four on the bottom and three in the rear panelThree screws are visible on the rear panel and four are hidden inside the rubber feet (which are attached with adhesive tape) 
 +  *There are strong clips on sides keeping the bottom tight even when the screws have been opened. These clips need to be pronged open with a flat screwdrivers or something. (I needed two screwdrivers).  Additionally, there are small fangs in the vertical front panel 
 + 
 + 
 +Bottom panel: 
 + 
 +{{media:netgear:rax120:rax120_bottom_desc.jpg?800|Netgear RAX120 bottom panel}} 
 + 
 +Clips: 
 + 
 +{{media:netgear:rax120:rax120_clips_desc.jpg?800|Netgear RAX120 bottom clips}} 
 + 
 +Top cover & circuit board: 
 + 
 +{{media:netgear:rax120:rax120_inside_headerlocation.jpg?800|Netgear RAX120 circuit}}
  
 ==== Serial ==== ==== Serial ====
 +
 -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
  
-...+The serial header in RAX120 (labled J9003) is right at the edge of the circuitboard, so it can be accessed even when the cover is attached to the circuitboard.\\ 
 +I bended sideways the pins (at least ground, RX, TX), so that I could easily attach the serial cable. 
 +Using the markings in my USB-ttl converter, the pin order starting from right is: ground, RX, TX, +3.3V. 
 +^ Serial connection parameters for Netgear RAX120 | 115200, 8N1 | 
 + 
 +Header: 
 + 
 +{{media:netgear:rax120:rax120_header_instr.jpg?800|Netgear RAX120 serial header}} 
 + 
 +Serial cable: 
 + 
 +{{media:netgear:rax120:rax120_serial_pin_advice.jpg?800|Netgear RAX120 serial pins cable}} 
 + 
 +I drilled a hole for the serial cable to the side panel, so that I will later get serial access without opening the case. 
 + 
 +{{media:netgear:rax120:rax120_cable_hole.jpg?800|Netgear RAX120 serial cable}}
  
  
 ===== Bootlogs ===== ===== Bootlogs =====
 +
 +==== Bootloader log ====
 +
 +Bootloader log as seen from serial console.
 +
 +<WRAP bootlog>
 +<nowiki>
 +
 +=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.09.03 19:19:50 =~=~=~=~=~=~=~=~=~=~=~=
 + 
 +Format: Log Type - Time(microsec) - Message - Optional Info
 +Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
 +S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00110
 +S - IMAGE_VARIANT_STRING=HAACANAZA
 +S - OEM_IMAGE_VERSION_STRING=CRM
 +S - Boot Config, 0x000002e5
 +B -       205 - PBL, Start
 +B -      2748 - bootable_media_detect_entry, Start
 +B -      3454 - bootable_media_detect_success, Start
 +B -      3459 - elf_loader_entry, Start
 +B -      6288 - auth_hash_seg_entry, Start
 +B -      6548 - auth_hash_seg_exit, Start
 +B -     78086 - elf_segs_hash_verify_entry, Start
 +B -    149990 - PBL, End
 +B -    160491 - SBL1, Start
 +B -    212158 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
 +B -    218624 - pm_device_init, Start
 +B -    338397 - PM_SET_VAL:Skip
 +D -    119163 - pm_device_init, Delta
 +B -    340624 - pm_driver_init, Start
 +D -      5276 - pm_driver_init, Delta
 +B -    347120 - clock_init, Start
 +D -      1525 - clock_init, Delta
 +B -    351238 - boot_flash_init, Start
 +D -     12474 - boot_flash_init, Delta
 +B -    367372 - boot_config_data_table_init, Start
 +D -      3050 - boot_config_data_table_init, Delta - (575 Bytes)
 +B -    374845 - Boot Setting :  0x00000618
 +B -    378840 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
 +B -    386038 - sbl1_ddr_set_params, Start
 +B -    389546 - cpr_init, Start
 +D -      1098 - cpr_init, Delta
 +B -    394761 - Pre_DDR_clock_init, Start
 +B -    398848 - Pre_DDR_clock_init, End
 +B -    402234 - DDR Type : PCDDR3
 +B -    407815 - do ddr sanity test, Start
 +D -       976 - do ddr sanity test, Delta
 +B -    412756 - DDR: Start of HAL DDR Boot Training
 +B -    417392 - DDR: End of HAL DDR Boot Training
 +B -    423035 - DDR: Checksum to be stored on flash is -45748451
 +B -    433130 - Image Load, Start
 +D -    245068 - QSEE Image Loaded, Delta - (1368672 Bytes)
 +B -    678259 - Image Load, Start
 +D -       640 - SEC Image Loaded, Delta - (2048 Bytes)
 +B -    685884 - Image Load, Start
 +D -     43157 - DEVCFG Image Loaded, Delta - (31941 Bytes)
 +B -    729133 - Image Load, Start
 +D -     22997 - RPM Image Loaded, Delta - (99896 Bytes)
 +B -    752221 - Image Load, Start
 +D -     71004 - APPSBL Image Loaded, Delta - (446536 Bytes)
 +B -    823347 - QSEE Execution, Start
 +D -        30 - QSEE Execution, Delta
 +B -    829112 - USB D+ check, Start
 +D -         0 - USB D+ check, Delta
 +B -    835608 - SBL1, End
 +D -    677313 - SBL1, Delta
 +S - Flash Throughput, 6939 KB/s  (1950340 Bytes,  281048 us)
 +S - DDR Frequency, 466 MHz
 +S - Core 0 Frequency, 1651 MHz
 +
 +
 +
 +U-Boot 2016.01-23637-g6be947d (Sep 26 2018 - 10:21:39 +0800)
 +
 +
 +Model: QCA, IPQ807x-HK01
 +U-boot dni1 V1.2 for DNI HW ID: 29765589; NAND flash 512MB; RAM 1024MB .
 +developed based on 'qsdk-ipq807x.ilq.8.0-spf.8.0.CS' 
 +DRAM:  smem ram ptable found: ver: 1 len: 4
 +1 GiB
 +NAND:  ONFI device found
 +ID = 1590acef
 +Vendor = ef
 +Device = ac
 +SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
 +ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
 +512 MiB
 +MMC:   <NULL>: 0
 +*** Warning - bad CRC, using default environment
 +
 +In:    serial@78B3000
 +Out:   serial@78B3000
 +Err:   serial@78B3000
 +machid: 8010000
 +Net:   MAC0 addr:bc:a5:11:a7:ae:f6
 +PHY ID1: 0x4d
 +PHY ID2: 0xd0b1
 +
 +NAND read: device 0 offset 0x7e00000, size 0x80000
 + 524288 bytes read: OK
 +bad magic on ETHPHYFW partition
 +PHY ID1: 0x3a1
 +PHY ID2: 0xb612
 +EDMA ver 1 hw init
 +Num rings - TxDesc:1 (0-0) TxCmpl:1 (7-7)
 +RxDesc:1 (15-15) RxFill:1 (7-7)
 +ipq807x_edma_alloc_rings: successfull
 +ipq807x_edma_setup_ring_resources: successfull
 +ipq807x_edma_configure_rings: successfull
 +ipq807x_edma_hw_init: successfull
 +eth0
 +Hit any key to stop autoboot:  2  1  0 
 +ipq807x_eth_halt: done
 +eth0 PHY0 Down Speed :10 Half duplex
 +eth0 PHY1 Down Speed :10 Half duplex
 +eth0 PHY2 Down Speed :10 Half duplex
 +eth0 PHY3 Down Speed :10 Half duplex
 +eth0 PHY4 Down Speed :10 Half duplex
 +10M speed not supported
 +ipq807x_eth_halt: done
 +
 + nmrp server is stopped or failed !
 +Loading DNI firmware for checking...
 +
 +Loading from device 0: nand0 (offset 0x1980000)
 +
 +** KERNEL partition size, kernel : 0x580000 **
 +
 +** ROOTFS partition size, kernel: 0x580000, rootfs: 0x3380800 **
 +
 +** rootfs address : 0x4457ffc0 **
 +
 +## Checking Image at 44000000 ...
 +   FIT image found
 +   FIT description: ARM64 OpenWrt FIT (Flattened Image Tree)
 +    Image 0 (kernel@1)
 +     Description:  ARM64 OpenWrt Linux-4.4.60
 +     Type:         Kernel Image
 +     Compression:  gzip compressed
 +     Data Start:   0x440000e8
 +     Data Size:    4730017 Bytes = 4.5 MiB
 +     Architecture: AArch64
 +     OS:           Linux
 +     Load Address: 0x41080000
 +     Entry Point:  0x41080000
 +     Hash algo:    crc32
 +     Hash value:   a3fc9dba
 +     Hash algo:    sha1
 +     Hash value:   144b9a1a68d972a1664e804e098054cf5b21b163
 +    Image 1 (fdt@hk09)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x44482ed4
 +     Data Size:    71866 Bytes = 70.2 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   6ca5fead
 +     Hash algo:    sha1
 +     Hash value:   ff4a65f65657bd5ac190539d76ebfb68661a981e
 +    Image 2 (fdt@db.hk01)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444948a4
 +     Data Size:    71229 Bytes = 69.6 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   15cc8115
 +     Hash algo:    sha1
 +     Hash value:   1dc2631e9a29f4f51fb963ea3689092bb27352ba
 +    Image 3 (fdt@hk02)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444a5ff8
 +     Data Size:    71997 Bytes = 70.3 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   8e2d7c4f
 +     Hash algo:    sha1
 +     Hash value:   9876ca5d6c50a3e9734f2873f3f92152506e1117
 +    Image 4 (fdt@hk05)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444b7a4c
 +     Data Size:    62801 Bytes = 61.3 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   393fdf43
 +     Hash algo:    sha1
 +     Hash value:   dd11d4075c9a8e2de82cdb7032258076153afe29
 +    Image 5 (fdt@hk06)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444c70b4
 +     Data Size:    69432 Bytes = 67.8 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   c7dfdff3
 +     Hash algo:    sha1
 +     Hash value:   47ebd045090b2abb3085d7269b50dbdae83d9e4a
 +    Image 6 (fdt@hk08)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444d8100
 +     Data Size:    72361 Bytes = 70.7 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   b59ba680
 +     Hash algo:    sha1
 +     Hash value:   1bebce5b168cb94c57e0d136b790689a6d7484e8
 +    Image 7 (fdt@ac01.1)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444e9cc0
 +     Data Size:    71430 Bytes = 69.8 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   6716e07c
 +     Hash algo:    sha1
 +     Hash value:   b64060b58e4160f3c7d62e871b1ec6c003e4f887
 +    Image 8 (fdt@hk07)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x444fb4dc
 +     Data Size:    71684 Bytes = 70 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   65163bb7
 +     Hash algo:    sha1
 +     Hash value:   74f6062eb8829adafa71bae0ea1e2d4441f0db85
 +    Image 9 (fdt@hk01.c3)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x4450cdf4
 +     Data Size:    78213 Bytes = 76.4 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   043335ce
 +     Hash algo:    sha1
 +     Hash value:   edfca69b6b4b63c31a708bb0a6e93430f41c47ea
 +    Image 10 (fdt@ac01.2)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x44520090
 +     Data Size:    71430 Bytes = 69.8 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   6d05ae07
 +     Hash algo:    sha1
 +     Hash value:   f5aaa94365ddfc32d354066dd40ffe951aa53d24
 +    Image 11 (fdt@hk01.c2)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x445318ac
 +     Data Size:    76581 Bytes = 74.8 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   599fcbf0
 +     Hash algo:    sha1
 +     Hash value:   f8e0f41e3211915b4f3e15a5a1617f3edc8013d2
 +    Image 12 (fdt@hk01)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x445444e8
 +     Data Size:    77609 Bytes = 75.8 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   39c2eba7
 +     Hash algo:    sha1
 +     Hash value:   c5cbecdcc3d373affdeb8a6323a2aba771b9f6a8
 +    Image 13 (fdt@db.hk02)
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x44557528
 +     Data Size:    70794 Bytes = 69.1 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   7f19eec2
 +     Hash algo:    sha1
 +     Hash value:   95787cbb11c0f5ad824a409b899a08ef4e0c0678
 +    Default Configuration: 'config@db.hk02'
 +    Configuration 0 (config@hk09)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk09
 +    Configuration 1 (config@db.hk01)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@db.hk01
 +    Configuration 2 (config@hk02)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk02
 +    Configuration 3 (config@hk05)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk05
 +    Configuration 4 (config@hk06)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk06
 +    Configuration 5 (config@hk08)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk08
 +    Configuration 6 (config@ac01.1)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@ac01.1
 +    Configuration 7 (config@hk07)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk07
 +    Configuration 8 (config@hk01.c3)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk01.c3
 +    Configuration 9 (config@ac01.2)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@ac01.2
 +    Configuration 10 (config@hk01.c2)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk01.c2
 +    Configuration 11 (config@hk01)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@hk01
 +    Configuration 12 (config@db.hk02)
 +     Description:  OpenWrt
 +     Kernel:       kernel@1
 +     FDT:          fdt@db.hk02
 +## Checking hash(es) for FIT Image at 44000000 ...
 +   Hash(es) for Image 0 (kernel@1): crc32+ sha1+ 
 +   Hash(es) for Image 1 (fdt@hk09): crc32+ sha1+ 
 +   Hash(es) for Image 2 (fdt@db.hk01): crc32+ sha1+ 
 +   Hash(es) for Image 3 (fdt@hk02): crc32+ sha1+ 
 +   Hash(es) for Image 4 (fdt@hk05): crc32+ sha1+ 
 +   Hash(es) for Image 5 (fdt@hk06): crc32+ sha1+ 
 +   Hash(es) for Image 6 (fdt@hk08): crc32+ sha1+ 
 +   Hash(es) for Image 7 (fdt@ac01.1): crc32+ sha1+ 
 +   Hash(es) for Image 8 (fdt@hk07): crc32+ sha1+ 
 +   Hash(es) for Image 9 (fdt@hk01.c3): crc32+ sha1+ 
 +   Hash(es) for Image 10 (fdt@ac01.2): crc32+ sha1+ 
 +   Hash(es) for Image 11 (fdt@hk01.c2): crc32+ sha1+ 
 +   Hash(es) for Image 12 (fdt@hk01): crc32+ sha1+ 
 +   Hash(es) for Image 13 (fdt@db.hk02): crc32+ sha1+ 
 +
 +## Checking Image at 4457ffc0 ...
 +   Legacy image found
 +   Image Name:   Linux-4.4.60
 +   Image Type:   AArch64 Linux Kernel Image (lzma compressed)
 +   Data Size:    54003712 Bytes = 51.5 MiB
 +   Load Address: 40908000
 +   Entry Point:  40908000
 +   Verifying Checksum ... OK
 +
 +NAND read: device 0 offset 0x1980000, size 0x6400000
 + 104857600 bytes read: OK
 +## Loading kernel from FIT Image at 44000000 ...
 +   Using 'config@hk01' configuration
 +   Trying 'kernel@1' kernel subimage
 +     Description:  ARM64 OpenWrt Linux-4.4.60
 +     Type:         Kernel Image
 +     Compression:  gzip compressed
 +     Data Start:   0x440000e8
 +     Data Size:    4730017 Bytes = 4.5 MiB
 +     Architecture: AArch64
 +     OS:           Linux
 +     Load Address: 0x41080000
 +     Entry Point:  0x41080000
 +     Hash algo:    crc32
 +     Hash value:   a3fc9dba
 +     Hash algo:    sha1
 +     Hash value:   144b9a1a68d972a1664e804e098054cf5b21b163
 +   Verifying Hash Integrity ... crc32+ sha1+ OK
 +## Loading fdt from FIT Image at 44000000 ...
 +   Using 'config@hk01' configuration
 +   Trying 'fdt@hk01' fdt subimage
 +     Description:  ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x445444e8
 +     Data Size:    77609 Bytes = 75.8 KiB
 +     Architecture: AArch64
 +     Hash algo:    crc32
 +     Hash value:   39c2eba7
 +     Hash algo:    sha1
 +     Hash value:   c5cbecdcc3d373affdeb8a6323a2aba771b9f6a8
 +   Verifying Hash Integrity ... crc32+ sha1+ OK
 +   Booting using the fdt blob at 0x445444e8
 +   Uncompressing Kernel Image ... OK
 +   Loading Device Tree to 4a5ea000, end 4a5fff28 ... OK
 +Using machid 0x8010000 from environment
 +
 +Starting kernel ...
 +
 +Jumping to AARCH64 kernel via monitor
 +[    0.000000] Booting Linux on physical CPU 0x0
 +[    0.000000] Initializing cgroup subsys cpuset
 +[    0.000000] Initializing cgroup subsys cpu
 +[    0.000000] Initializing cgroup subsys cpuacct
 +[    0.000000] Linux version 4.4.60 (root@CNXMDNIOUB01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 RAX120-V1.0.1.116+r49254) ) #1 SMP PREEMPT Thu Jun 18 19:52:00 CST 2020
 +
 +</nowiki>
 +</WRAP>\\
 +
 ==== OEM kernel bootlog ==== ==== OEM kernel bootlog ====
  
-Kernel bootlog with OEM firmware V1.0.1.128+Kernel log as seen from serial console. 
 <WRAP bootlog> <WRAP bootlog>
 <nowiki> <nowiki>
 +
 +Jumping to AARCH64 kernel via monitor
 [    0.000000] Booting Linux on physical CPU 0x0 [    0.000000] Booting Linux on physical CPU 0x0
 [    0.000000] Initializing cgroup subsys cpuset [    0.000000] Initializing cgroup subsys cpuset
Line 196: Line 772:
 [    0.000000] efi: Getting EFI parameters from FDT: [    0.000000] efi: Getting EFI parameters from FDT:
 [    0.000000] efi: UEFI not found. [    0.000000] efi: UEFI not found.
-[    0.000000] On node 0 totalpages: 232928 
-[    0.000000]   DMA zone: 3640 pages used for memmap 
-[    0.000000]   DMA zone: 0 pages reserved 
-[    0.000000]   DMA zone: 232928 pages, LIFO batch:31 
 [    0.000000] psci: probing for conduit method from DT. [    0.000000] psci: probing for conduit method from DT.
 [    0.000000] psci: PSCIv1.0 detected in firmware. [    0.000000] psci: PSCIv1.0 detected in firmware.
Line 205: Line 777:
 [    0.000000] psci: MIGRATE_INFO_TYPE not supported. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
 [    0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4f000 s21248 r8192 d32000 u61440 [    0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4f000 s21248 r8192 d32000 u61440
-[    0.000000] pcpu-alloc: s21248 r8192 d32000 u61440 alloc=15*4096 
-[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 [    0.000000] Detected VIPT I-cache on CPU0 [    0.000000] Detected VIPT I-cache on CPU0
 [    0.000000] CPU features: enabling workaround for ARM erratum 845719 [    0.000000] CPU features: enabling workaround for ARM erratum 845719
Line 234: Line 804:
 [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
 [    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
-[    0.000239] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) +[    0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 
-[    0.000246] pid_max: default: 32768 minimum: 301 +[    0.000244] pid_max: default: 32768 minimum: 301 
-[    0.000305] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) +[    0.000301] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 
-[    0.000309] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) +[    0.000306] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 
-[    0.000649] Initializing cgroup subsys io +[    0.000645] Initializing cgroup subsys io 
-[    0.000659] Initializing cgroup subsys devices +[    0.000657] Initializing cgroup subsys devices 
-[    0.000667] Initializing cgroup subsys freezer +[    0.000664] Initializing cgroup subsys freezer 
-[    0.000674] Initializing cgroup subsys net_cls +[    0.000671] Initializing cgroup subsys net_cls 
-[    0.000681] Initializing cgroup subsys pids +[    0.000676] Initializing cgroup subsys pids 
-[    0.000852] EFI services will not be available. +[    0.000845] EFI services will not be available. 
-[    0.000868] ASID allocator initialised with 65536 entries +[    0.000861] ASID allocator initialised with 65536 entries 
-[    0.051377] MSM Memory Dump base table set up +[    0.051368] MSM Memory Dump base table set up 
-[    0.051392] MSM Memory Dump apps data table set up +[    0.051384] MSM Memory Dump apps data table set up 
-[    0.090107] Detected VIPT I-cache on CPU1+[    0.090106] Detected VIPT I-cache on CPU1
 [    0.090136] CPU1: Booted secondary processor [410fd034] [    0.090136] CPU1: Booted secondary processor [410fd034]
-[    0.120084] Detected VIPT I-cache on CPU2+[    0.120083] Detected VIPT I-cache on CPU2
 [    0.120097] CPU2: Booted secondary processor [410fd034] [    0.120097] CPU2: Booted secondary processor [410fd034]
-[    0.150097] Detected VIPT I-cache on CPU3 +[    0.150096] Detected VIPT I-cache on CPU3 
-[    0.150110] CPU3: Booted secondary processor [410fd034] +[    0.150109] CPU3: Booted secondary processor [410fd034] 
-[    0.150138] Brought up 4 CPUs +[    0.150136] Brought up 4 CPUs 
-[    0.150152] SMP: Total of 4 processors activated. +[    0.150150] SMP: Total of 4 processors activated. 
-[    0.150157] CPU: All CPU(s) started at EL1 +[    0.150156] CPU: All CPU(s) started at EL1 
-[    0.150173] alternatives: patching kernel code +[    0.150171] alternatives: patching kernel code 
-[    0.158993] DMI not present or invalid. +[    0.159007] DMI not present or invalid. 
-[    0.159141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +[    0.159154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
-[    0.159157] futex hash table entries: 1024 (order: 5, 131072 bytes) +[    0.159169] futex hash table entries: 1024 (order: 5, 131072 bytes) 
-[    0.159382] pinctrl core: initialized pinctrl subsystem +[    0.159394] pinctrl core: initialized pinctrl subsystem 
-[    0.159916] NET: Registered protocol family 16 +[    0.159926] NET: Registered protocol family 16 
-[    0.160021] ramoops: using module parameters +[    0.160033] ramoops: using module parameters 
-[    0.160106] pstore: Registered ramoops as persistent store backend +[    0.160115] pstore: Registered ramoops as persistent store backend 
-[    0.160111] ramoops: attached 0x20000@0x50b00000, ecc: 0/0 +[    0.160121] ramoops: attached 0x20000@0x50b00000, ecc: 0/0 
-[    0.190025] cpuidle: using governor ladder +[    0.190026] cpuidle: using governor ladder 
-[    0.220033] cpuidle: using governor menu+[    0.220034] cpuidle: using governor menu
 [    0.220102] vdso: 2 pages (1 code @ ffffffc0009e5000, 1 data @ ffffffc0009e4000) [    0.220102] vdso: 2 pages (1 code @ ffffffc0009e5000, 1 data @ ffffffc0009e4000)
 [    0.220119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [    0.220119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
-[    0.220196] DMA: preallocated 256 KiB pool for atomic allocations +[    0.220195] DMA: preallocated 256 KiB pool for atomic allocations 
-[    0.220252] CPU: IPQ8074, SoC Version: 1.2+[    0.220251] CPU: IPQ8074, SoC Version: 1.2
 [    0.220271] <CORE> glink_init: IPC Logging Disabled [    0.220271] <CORE> glink_init: IPC Logging Disabled
-[    0.220454] IPC logging disabled +[    0.220455] IPC logging disabled 
-[    0.220457] IPC logging disabled+[    0.220458] IPC logging disabled
 [    0.220460] IPC logging disabled [    0.220460] IPC logging disabled
-[    0.220462] IPC logging disabled+[    0.220463] IPC logging disabled
 [    0.220465] IPC logging disabled [    0.220465] IPC logging disabled
-[    0.221499] gpiochip_add: registered GPIOs 0 to 69 on device: 1000000.pinctrl +[    0.227967] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! 
-[    0.221506] GPIO chip 1000000.pinctrl: created GPIO range 0->69 ==> 1000000.pinctrl PIN 0->69 +[    0.230271] <CORE> glink_core_register_transport: IPC Logging disabled 
-[    0.227953] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! +[    0.230307] glink_core_link_up glink is up 
-[    0.230268] <CORE> glink_core_register_transport: IPC Logging disabled +[    0.230933] sps:sps is ready. 
-[    0.230303] glink_core_link_up glink is up +[    0.261270] dmi: Firmware registration failed. 
-[    0.230931] sps:sps is ready. +[    0.262048] Advanced Linux Sound Architecture Driver Initialized. 
-[    0.260770] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed-regulator@0[0]' +[    0.262419] clocksource: Switched to clocksource arch_sys_counter 
-[    0.261276] dmi: Firmware registration failed. +[    0.262594] FS-Cache: Loaded 
-[    0.262053] Advanced Linux Sound Architecture Driver Initialized. +[    0.264171] NET: Registered protocol family 2 
-[    0.262427] clocksource: Switched to clocksource arch_sys_counter +[    0.264238] create ipmac proc 
-[    0.262601] FS-Cache: Loaded +[    0.264576] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 
-[    0.264185] NET: Registered protocol family 2 +[    0.264630] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 
-[    0.264253] create ipmac proc +[    0.264724] TCP: Hash tables configured (established 8192 bind 8192) 
-[    0.264592] TCP established hash table entries: 8192 (order: 4, 65536 bytes) +[    0.264763] UDP hash table entries: 512 (order: 2, 16384 bytes) 
-[    0.264646] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) +[    0.264781] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 
-[    0.264739] TCP: Hash tables configured (established 8192 bind 8192) +[    0.264889] NET: Registered protocol family 1 
-[    0.264778] UDP hash table entries: 512 (order: 2, 16384 bytes) +[    0.265027] RPC: Registered named UNIX socket transport module. 
-[    0.264796] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) +[    0.265031] RPC: Registered udp transport module. 
-[    0.264904] NET: Registered protocol family 1 +[    0.265034] RPC: Registered tcp transport module. 
-[    0.265040] RPC: Registered named UNIX socket transport module. +[    0.265037] RPC: Registered tcp NFSv4.1 backchannel transport module. 
-[    0.265044] RPC: Registered udp transport module. +[    0.265549] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 
-[    0.265047] RPC: Registered tcp transport module. +[    0.270605] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
-[    0.265050] RPC: Registered tcp NFSv4.1 backchannel transport module. +[    0.271445] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
-[    0.265063] PCI: CLS 0 bytes, default 128 +[    0.271820] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
-[    0.265560] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available +[    0.272102] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. 
-[    0.270619] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[    0.272165] fuse init (API version 7.23) 
-[    0.271455] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). +[    0.272347] SGI XFS with ACLs, security attributes, realtime, no debug enabled 
-[    0.271828] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. +[    0.274690] Key type asymmetric registered 
-[    0.272109] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. +[    0.274700] Asymmetric key parser 'x509' registered 
-[    0.272173] fuse init (API version 7.23) +[    0.274720] io scheduler noop registered 
-[    0.272356] SGI XFS with ACLs, security attributes, realtime, no debug enabled +[    0.274727] io scheduler deadline registered (default) 
-[    0.274701] Key type asymmetric registered +[    0.275769] Turn Off All LED 
-[    0.274711] Asymmetric key parser 'x509' registered +[    0.276190] 20000000.pci supply vdda not found, using dummy regulator 
-[    0.274731] io scheduler noop registered +[    0.276226] 20000000.pci supply vdda_phy not found, using dummy regulator 
-[    0.274737] io scheduler deadline registered (default) +[    0.276250] 20000000.pci supply vdda_refclk not found, using dummy regulator 
-[    0.275780] Turn Off All LED +[    0.276430] PCI host bridge /soc/pci@20000000 ranges: 
-[    0.276090] qcom-pcie 20000000.pci: GPIO lookup for consumer perst +[    0.276447]    IO 0x20200000..0x202fffff -> 0x20200000 
-[    0.276095] qcom-pcie 20000000.pci: using device tree for GPIO lookup +[    0.276456]   MEM 0x20300000..0x20ffffff -> 0x20300000 
-[    0.276102] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@20000000[0]' +[    1.302444] qcom-pcie 20000000.pci: phy link never came up 
-[    0.276112] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@20000000[0]' - status (0) +[    1.303971] qcom-pcie 20000000.pci: hostinit failed 
-[    0.276199] 20000000.pci supply vdda not found, using dummy regulator +[    1.303976] qcom-pcie 20000000.pci: cannot initialize host 
-[    0.276236] 20000000.pci supply vdda_phy not found, using dummy regulator +[    1.304077] qcom-pcie: probe of 20000000.pci failed with error -110 
-[    0.276259] 20000000.pci supply vdda_refclk not found, using dummy regulator +[    1.304212] 10000000.pci supply vdda not found, using dummy regulator 
-[    0.276439] PCI host bridge /soc/pci@20000000 ranges: +[    1.304238] 10000000.pci supply vdda_phy not found, using dummy regulator 
-[    0.276456]    IO 0x20200000..0x202fffff -> 0x20200000 +[    1.304257] 10000000.pci supply vdda_refclk not found, using dummy regulator 
-[    0.276464]   MEM 0x20300000..0x20ffffff -> 0x20300000 +[    1.304429] PCI host bridge /soc/pci@10000000 ranges: 
-[    1.302453] qcom-pcie 20000000.pci: phy link never came up +[    1.304443]    IO 0x10200000..0x102fffff -> 0x10200000 
-[    1.303980] qcom-pcie 20000000.pci: hostinit failed +[    1.304450]   MEM 0x10300000..0x10ffffff -> 0x10300000 
-[    1.303985] qcom-pcie 20000000.pci: cannot initialize host +[    2.339420] qcom-pcie 10000000.pci: phy link never came up 
-[    1.304090] qcom-pcie: probe of 20000000.pci failed with error -110 +[    2.340943] qcom-pcie 10000000.pci: hostinit failed 
-[    1.304128] qcom-pcie 10000000.pci: GPIO lookup for consumer perst +[    2.340948] qcom-pcie 10000000.pci: cannot initialize host 
-[    1.304133] qcom-pcie 10000000.pci: using device tree for GPIO lookup +[    2.341009] qcom-pcie: probe of 10000000.pci failed with error -110 
-[    1.304140] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@10000000[0]' +[    2.341267] MDSS QPIC HW Base phy_Address=0x7980000 virt=0x4c0000 
-[    1.304149] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@10000000[0]' - status (0) +[    2.341489] mdss_qpic_panel_probe: Panel Name = qpic lcd panel 
-[    1.304229] 10000000.pci supply vdda not found, using dummy regulator +[    2.342329] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully! 
-[    1.304256] 10000000.pci supply vdda_phy not found, using dummy regulator +[    2.345036] NET: Registered protocol family 27 
-[    1.304274] 10000000.pci supply vdda_refclk not found, using dummy regulator +[    2.345045] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled 
-[    1.304448] PCI host bridge /soc/pci@10000000 ranges: +[    2.345053] qmi_log_init: IPC Logging disabled 
-[    1.304461]    IO 0x10200000..0x102fffff -> 0x10200000 +[    2.345056] qmi_log_init: IPC Logging disabled 
-[    1.304469]   MEM 0x10300000..0x10ffffff -> 0x10300000 +[    2.345105] msm_rpm_log_probe: OK 
-[    2.339439] qcom-pcie 10000000.pci: phy link never came up +[    2.345635] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set 
-[    2.340963] qcom-pcie 10000000.pci: hostinit failed +[    2.346033] msm_serial 78b3000.serial: msm_serial: detected port #0 
-[    2.340968] qcom-pcie 10000000.pci: cannot initialize host +[    2.346057] msm_serial 78b3000.serial: uartclk = 3686400 
-[    2.341030] qcom-pcie: probe of 10000000.pci failed with error -110 +[    2.346085] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM 
-[    2.341293] MDSS QPIC HW Base phy_Address=0x7980000 virt=0x4c0000 +[    2.346102] msm_serial: console setup on port #0 
-[    2.341513] mdss_qpic_panel_probe: Panel Name = qpic lcd panel +[    3.182703] console [ttyMSM0] enabled 
-[    2.342360] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully! +[    3.187553] msm_serial 78b1000.serial: msm_serial: detected port #1 
-[    2.345074] NET: Registered protocol family 27 +[    3.190956] msm_serial 78b1000.serial: uartclk = 19200000 
-[    2.345083] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled +[    3.197038] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM 
-[    2.345091] qmi_log_init: IPC Logging disabled +[    3.202765] msm_serial: driver initialized 
-[    2.345094] qmi_log_init: IPC Logging disabled +[    3.211247] msm_serial_hsl_init: driver initialized 
-[    2.345143] msm_rpm_log_probe: OK +[    3.219978] brd: module loaded 
-[    2.345672] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set +[    3.222288] loop: module loaded 
-[    2.346068] msm_serial 78b3000.serial: msm_serial: detected port #0 +[    3.223436] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 
-[    2.346092] msm_serial 78b3000.serial: uartclk = 3686400 +[    4.222425] m25p80 spi32766.0: SPI transfer failed: -110 
-[    2.346121] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM +[    4.222449] spi_master spi32766: failed to transfer one message from queue 
-[    2.346138] msm_serial: console setup on port #0 +[    4.226794] m25p80 spi32766.0: error -110 reading 9f 
-[    3.182738] console [ttyMSM0] enabled +[    4.233490] m25p80: probe of spi32766.0 failed with error -110 
-[    3.187593] msm_serial 78b1000.serial: msm_serial: detected port #1 +[    4.239333] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac 
-[    3.190991] msm_serial 78b1000.serial: uartclk = 19200000 +[    4.244249] nand: Winbond W29N04GZ 
-[    3.197075] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM +[    4.250744] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 
-[    3.202803] msm_serial: driver initialized +[    4.254033] 33 ofpart partitions found on MTD device qcom_nand.0 
-[    3.211282] msm_serial_hsl_init: driver initialized +[    4.261513] Creating 33 MTD partitions on "qcom_nand.0": 
-[    3.220025] brd: module loaded +[    4.267686] 0x000000000000-0x000000100000 : "0:SBL1" 
-[    3.222340] loop: module loaded +[    4.274080] 0x000000100000-0x000000200000 : "0:MIBIB" 
-[    3.223471] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 +[    4.278862] 0x000000200000-0x000000280000 : "0:BOOTCONFIG" 
-[    4.222433] m25p80 spi32766.0: SPI transfer failed: -110 +[    4.283504] 0x000000280000-0x000000300000 : "0:BOOTCONFIG1" 
-[    4.222457] spi_master spi32766: failed to transfer one message from queue +[    4.288881] 0x000000300000-0x000000600000 : "0:QSEE" 
-[    4.226802] m25p80 spi32766.0: error -110 reading 9f +[    4.295918] 0x000000600000-0x000000900000 : "0:QSEE_1" 
-[    4.233499] m25p80: probe of spi32766.0 failed with error -110 +[    4.301127] 0x000000900000-0x000000980000 : "0:DEVCFG" 
-[    4.239334] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac +[    4.304519] 0x000000980000-0x000000a00000 : "0:DEVCFG_1" 
-[    4.244257] nand: Winbond W29N04GZ +[    4.309623] 0x000000a00000-0x000000a80000 : "0:APDP" 
-[    4.250752] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 +[    4.315110] 0x000000a80000-0x000000b00000 : "0:APDP_1" 
-[    4.254039] 33 ofpart partitions found on MTD device qcom_nand.0 +[    4.320043] 0x000000b00000-0x000000b80000 : "0:RPM" 
-[    4.261521] Creating 33 MTD partitions on "qcom_nand.0": +[    4.324992] 0x000000b80000-0x000000c00000 : "0:RPM_1" 
-[    4.267694] 0x000000000000-0x000000100000 : "0:SBL1" +[    4.329770] 0x000000c00000-0x000000c80000 : "0:CDT" 
-[    4.274085] 0x000000100000-0x000000200000 : "0:MIBIB" +[    4.334982] 0x000000c80000-0x000000d00000 : "0:CDT_1" 
-[    4.278873] 0x000000200000-0x000000280000 : "0:BOOTCONFIG" +[    4.339680] 0x000000d00000-0x000000d80000 : "0:APPSBLENV" 
-[    4.283510] 0x000000280000-0x000000300000 : "0:BOOTCONFIG1" +[    4.344883] 0x000000d80000-0x000000e80000 : "0:APPSBL" 
-[    4.288894] 0x000000300000-0x000000600000 : "0:QSEE" +[    4.350566] 0x000000e80000-0x000000f80000 : "0:APPSBL_1" 
-[    4.295927] 0x000000600000-0x000000900000 : "0:QSEE_1" +[    4.355612] 0x000000f80000-0x000001000000 : "0:ART" 
-[    4.301139] 0x000000900000-0x000000980000 : "0:DEVCFG" +[    4.360768] 0x000001000000-0x000001080000 : "0:ART.bak" 
-[    4.304527] 0x000000980000-0x000000a00000 : "0:DEVCFG_1" +[    4.365355] 0x000001080000-0x000001180000 : "config" 
-[    4.309632] 0x000000a00000-0x000000a80000 : "0:APDP" +[    4.370862] 0x000001180000-0x000001280000 : "boarddata1" 
-[    4.315115] 0x000000a80000-0x000000b00000 : "0:APDP_1" +[    4.376101] 0x000001280000-0x000001380000 : "boarddata2" 
-[    4.320054] 0x000000b00000-0x000000b80000 : "0:RPM" +[    4.381379] 0x000001380000-0x000001480000 : "pot" 
-[    4.325005] 0x000000b80000-0x000000c00000 : "0:RPM_1" +[    4.386693] 0x000001480000-0x000001980000 : "dnidata" 
-[    4.329782] 0x000000c00000-0x000000c80000 : "0:CDT" +[    4.393770] 0x000001980000-0x000007d80000 : "firmware" 
-[    4.334992] 0x000000c80000-0x000000d00000 : "0:CDT_1" +[    4.457390] 0x000001980000-0x000001f00000 : "kernel" 
-[    4.339688] 0x000000d00000-0x000000d80000 : "0:APPSBLENV" +[    4.461145] 0x000001f00000-0x000007d80000 : "rootfs" 
-[    4.344892] 0x000000d80000-0x000000e80000 : "0:APPSBL" +[    4.519862] mtd: device 26 (rootfs) set to be root filesystem 
-[    4.350576] 0x000000e80000-0x000000f80000 : "0:APPSBL_1" +[    4.520177] mtd: find squashfs magic at 0x1f00000 of qcom_nand.0 
-[    4.355624] 0x000000f80000-0x000001000000 : "0:ART" +[    4.524580] mtd: find squashfs magic at 0x0 of rootfs 
-[    4.360777] 0x000001000000-0x000001080000 : "0:ART.bak" +[    4.530649] remap_blocks_in_rootfs_partition: remapped partition rootfs: 0x000001f00000-0x000007d80000 
-[    4.365362] 0x000001080000-0x000001180000 : "config" +[    4.535609] create_block_mapping: create logic to physic blocks mapping for rootfs 
-[    4.370869] 0x000001180000-0x000001280000 : "boarddata1" +[    4.602991] 0x000007d80000-0x000008100000 : "language" 
-[    4.376111] 0x000001280000-0x000001380000 : "boarddata2" +[    4.605503] 0x000008100000-0x000008200000 : "cert" 
-[    4.381391] 0x000001380000-0x000001480000 : "pot" +[    4.607958] 0x000008200000-0x000008280000 : "mtdoops" 
-[    4.386704] 0x000001480000-0x000001980000 : "dnidata" +[    4.612433] 0x000008280000-0x000008480000 : "router_analytics" 
-[    4.393785] 0x000001980000-0x000007d80000 : "firmware" +[    4.618465] 0x000008480000-0x00000e880000 : "ntgrdata" 
-[    4.457441] 0x000001980000-0x000001f00000 : "kernel" +[    4.684647] 0x00000e880000-0x000020000000 : "reserved" 
-[    4.461195] 0x000001f00000-0x000007d80000 : "rootfs" +[    4.734211] random: nonblocking pool is initialized 
-[    4.519947] mtd: device 26 (rootfs) set to be root filesystem +[    4.857922] spmi spmi-0: PMIC Arb Version-2 (0x20010000) 
-[    4.520260] mtd: find squashfs magic at 0x1f00000 of qcom_nand.0 +[    4.859741] libphy: Fixed MDIO Bus: probed 
-[    4.524666] mtd: find squashfs magic at 0x0 of rootfs +[    5.082445] qca-mdio 90000.mdio: Could not find phy-reset-gpio 
-[    4.530733] remap_blocks_in_rootfs_partition: remapped partition rootfs: 0x000001f00000-0x000007d80000 +[    5.082512] libphy: qca_mdio: probed 
-[    4.535694] create_block_mapping: create logic to physic blocks mapping for rootfs +[    5.088277] qca-mdio 90000.mdio: qca-mdio driver was registered 
-[    4.603265] 0x000007d80000-0x000008100000 : "language" +[    5.091039] cnss: Unable to create IPC log context! 
-[    4.605747] 0x000008100000-0x000008200000 : "cert" +[    5.096660] cnss: Platform driver probed successfully. 
-[    4.608224] 0x000008200000-0x000008280000 : "mtdoops" +[    5.101513] cnss: Platform driver probed successfully. 
-[    4.612706] 0x000008280000-0x000008480000 : "router_analytics" +[    5.106697] i2c /dev entries driver 
-[    4.618742] 0x000008480000-0x00000e880000 : "ntgrdata" +[    5.119773] sdhci: Secure Digital Host Controller Interface driver 
-[    4.684990] 0x00000e880000-0x000020000000 : "reserved" +[    5.119797] sdhci: Copyright(c) Pierre Ossman 
-[    4.734549] random: nonblocking pool is initialized +[    5.124884] sdhci-pltfm: SDHCI platform and OF driver helper 
-[    4.858335] spmi spmi-0: PMIC Arb Version-2 (0x20010000) +[    5.129394] sdhci_msm 7824900.sdhci: No vreg data found for vdd 
-[    4.860153] libphy: Fixed MDIO Bus: probed +[    5.135017] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io 
-[    4.863096] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0) +[    5.141851] sdhci_msm 7824900.sdhci: No vmmc regulator found 
-[    5.082447] of_get_named_gpiod_flags: can't parse 'phy-reset-gpio' property of node '/soc/mdio@90000[1]' +[    5.146903] sdhci_msm 7824900.sdhci: No vqmmc regulator found 
-[    5.082453] qca-mdio 90000.mdio: Could not find phy-reset-gpio +[    5.192460] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit 
-[    5.082519] libphy: qca_mdio: probed +[    5.192611] sdhci_msm 7864900.sdhci: Got SD LDO GPIO #21 
-[    5.088284] qca-mdio 90000.mdio: qca-mdio driver was registered +[    5.320507] sdhci_msm 7864900.sdhci: No vreg data found for vdd 
-[    5.091049] cnss: Unable to create IPC log context! +[    5.320527] sdhci_msm 7864900.sdhci: No vreg data found for vdd-io 
-[    5.096668] cnss: Platform driver probed successfully. +[    5.335959] pmd9655_ldo11: supplied by e-smps1-reg 
-[    5.101520] cnss: Platform driver probed successfully. +[    5.336043] sdhci_msm 7864900.sdhci: No vmmc regulator found 
-[    5.106704] i2c /dev entries driver +[    5.382477] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit 
-[    5.118928] sdhci: Secure Digital Host Controller Interface driver +[    5.383712]  
-[    5.118952] sdhci: Copyright(c) Pierre Ossman +[    5.383712] Version Rollback Feature Disabled 
-[    5.124038] sdhci-pltfm: SDHCI platform and OF driver helper +[    5.389834] SPMI VADC - Min ch: 0 Max ch: 15 
-[    5.128529] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@7824900[0]' +[    5.396454] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 
-[    5.128534] of_get_named_gpiod_flags: can't parse 'sd-ldo-gpios' property of node '/soc/sdhci@7824900[0]' +[    5.399473] coresight-csr 6001000.csr: CSR initialized 
-[    5.128547] sdhci_msm 7824900.sdhci: No vreg data found for vdd +[    5.406909] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 
-[    5.134173] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io +[    5.411845] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 
-[    5.140997] sdhci_msm 7824900.sdhci: No vmmc regulator found +[    5.419398] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 
-[    5.146057] sdhci_msm 7824900.sdhci: No vqmmc regulator found +[    5.426770] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 
-[    5.192468] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit +[    5.434149] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 
-[    5.192600] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/sdhci@7864900[0]' - status (0) +[    5.441520] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 
-[    5.192608] of_get_named_gpiod_flags: parsed 'sd-ldo-gpios' property of node '/soc/sdhci@7864900[0]' - status (0) +[    5.448906] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 
-[    5.192618] sdhci_msm 7864900.sdhci: Got SD LDO GPIO #21 +[    5.456285] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 
-[    5.320519] sdhci_msm 7864900.sdhci: No vreg data found for vdd +[    5.463662] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 
-[    5.320539] sdhci_msm 7864900.sdhci: No vreg data found for vdd-io +[    5.471034] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 
-[    5.335968] pmd9655_ldo11: supplied by e-smps1-reg +[    5.478425] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 
-[    5.336053] sdhci_msm 7864900.sdhci: No vmmc regulator found +[    5.485797] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 
-[    5.382489] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit +[    5.493180] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 
-[    5.383726]  +[    5.500547] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 
-[    5.383726] Version Rollback Feature Disabled +[    5.507936] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 
-[    5.389851] SPMI VADC - Min ch: 0 Max ch: 15 +[    5.515312] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 
-[    5.396465] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 +[    5.522695] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 
-[    5.399486] coresight-csr 6001000.csr: CSR initialized +[    5.530189] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 
-[    5.406921] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 +[    5.537523] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 
-[    5.411858] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 +[    5.544917] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 
-[    5.419412] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 +[    5.552314] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 
-[    5.426783] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 +[    5.559684] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 
-[    5.434162] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 +[    5.566888] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 
-[    5.441531] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 +[    5.585058] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 
-[    5.448919] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 +[    5.599871] sps:BAM 0x0000000006044000 is registered.[    5.607378] coresight-tmc 6028000.tmc: TMC initialized 
-[    5.456296] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 +[    5.612160] coresight-tmc 6027000.tmc: TMC initialized 
-[    5.463675] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 +[    5.617327] coresight-funnel 6021000.funnel: FUNNEL initialized 
-[    5.471047] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 +[    5.622384] coresight-funnel 6100000.funnel: FUNNEL initialized 
-[    5.478435] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 +[    5.628208] coresight-funnel 6120000.funnel: FUNNEL initialized 
-[    5.485810] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 +[    5.634114] coresight-funnel 61a1000.funnel: FUNNEL initialized 
-[    5.493191] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 +[    5.640364] coresight-etm4x 619c000.etm: ETM 4.0 initialized 
-[    5.500560] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 +[    5.646105] coresight-etm4x 619d000.etm: ETM 4.0 initialized 
-[    5.507948] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 +[    5.652011] coresight-etm4x 619e000.etm: ETM 4.0 initialized 
-[    5.515325] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 +[    5.657687] coresight-etm4x 619f000.etm: ETM 4.0 initialized 
-[    5.522706] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 +[    5.663121] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized 
-[    5.530199] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 +[    5.668815] coresight-stm 6002000.stm: STM initialized 
-[    5.537537] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 +[    5.677062] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 
-[    5.544930] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 +[    5.681339] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized 
-[    5.552324] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 +[    5.689942] ipq_audio soc:sound@0: ASoC: CPU DAI qca-i2s-dai not registered 
-[    5.559693] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 +[    5.696580] ipq_audio soc:sound@0: snd_soc_register_card() failed:-517 
-[    5.566901] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 +[    5.704541] qca_codec 0-0012: i2c regmap done 
-[    5.585073] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 +[    5.710537] Netfilter messages via NETLINK v0.30. 
-[    5.599884] sps:BAM 0x0000000006044000 is registered.<6>[    5.607393] coresight-tmc 6028000.tmc: TMC initialized +[    5.714328] nf_conntrack version 0.5.0 (7047 buckets, 28188 max) 
-[    5.612171] coresight-tmc 6027000.tmc: TMC initialized +[    5.719465] ip_tables: (C) 2000-2006 Netfilter Core Team 
-[    5.617339] coresight-funnel 6021000.funnel: FUNNEL initialized +[    5.725493] NET: Registered protocol family 10 
-[    5.622395] coresight-funnel 6100000.funnel: FUNNEL initialized +[    5.731139] NET: Registered protocol family 17 
-[    5.628220] coresight-funnel 6120000.funnel: FUNNEL initialized +[    5.734629] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
-[    5.634127] coresight-funnel 61a1000.funnel: FUNNEL initialized +[    5.739051] Bridge firewalling registered 
-[    5.640372] coresight-etm4x 619c000.etm: ETM 4.0 initialized +[    5.751778] 8021q: 802.1Q VLAN Support v1.8 
-[    5.646116] coresight-etm4x 619d000.etm: ETM 4.0 initialized +[    5.755702] Key type dns_resolver registered 
-[    5.652024] coresight-etm4x 619e000.etm: ETM 4.0 initialized +[    5.760668] <CORE> glink_core_register_transport: IPC Logging disabled 
-[    5.657702] coresight-etm4x 619f000.etm: ETM 4.0 initialized +[    5.764257] msm_glink_smem_native_xprt rx fifo not found 
-[    5.663133] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized +[    5.770661] pmd9655_s3: supplied by e-smps1-reg 
-[    5.668828] coresight-stm 6002000.stm: STM initialized +[    5.776111] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 
-[    5.677074] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 +[    5.780245] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 3 
-[    5.681352] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized +[    5.786862] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 
-[    5.689956] ipq_audio soc:sound@0: ASoC: CPU DAI qca-i2s-dai not registered +[    5.794513] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable 
-[    5.696591] ipq_audio soc:sound@0: snd_soc_register_card() failed:-517 +[    5.801985] cpr3_mem_acc_init: apc: not using memory accelerator regulator 
-[    5.704553] qca_codec 0-0012: i2c regmap done +[    5.811155] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 752000 uV 
-[    5.710549] Netfilter messages via NETLINK v0.30. +[    5.818103] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 864000 uV 
-[    5.714340] nf_conntrack version 0.5.0 (7047 buckets, 28188 max) +[    5.828086] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 936000 uV 
-[    5.719475] ip_tables: (C) 2000-2006 Netfilter Core Team +[    5.837896] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop=1024000 uV 
-[    5.725508] NET: Registered protocol family 10 +[    5.847730] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 668, quot_offset[ 7]=   0 
-[    5.731150] NET: Registered protocol family 17 +[    5.857516] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 863, quot_offset[ 7]= 195 
-[    5.734640] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. +[    5.868366] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]= 975, quot_offset[ 7]= 110 
-[    5.739062] Bridge firewalling registered +[    5.879306] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1120, quot_offset[ 7]= 145 
-[    5.751790] 8021q: 802.1Q VLAN Support v1.8 +[    5.890314] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop 
-[    5.755716] Key type dns_resolver registered +[    5.901545] pmd9655_s4: supplied by e-smps1-reg 
-[    5.760677] <CORE> glink_core_register_transport: IPC Logging disabled +[    5.908017] cpr3_mem_acc_init: npu: not using memory accelerator regulator 
-[    5.764270] msm_glink_smem_native_xprt rx fifo not found +[    5.912277] npu_corner: fused      NOM: open-loop= 840000 uV 
-[    5.770676] pmd9655_s3: supplied by e-smps1-reg +[    5.919226] npu_corner: fused    TURBO: open-loop= 912000 uV 
-[    5.776124] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 +[    5.926887] ipq_audio soc:sound@0: qca-i2s-codec-dai <-> qca-i2s-dai mapping ok 
-[    5.780258] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 3 +[    5.931159] ipq_audio soc:sound@0: qca-tdm-codec-dai <-> qca-tdm-dai mapping ok 
-[    5.786874] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 +[    5.953224] hctosys: unable to open rtc device (rtc0) 
-[    5.794524] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable +[    5.958779] ALSA device list: 
-[    5.801998] cpr3_mem_acc_init: apc: not using memory accelerator regulator +[    5.958798]   #0: ipq8074_snd_card 
-[    5.811169] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 752000 uV +[    5.962372] VFS: Mounted root (squashfs filesystem) readonly on device 31:26. 
-[    5.818116] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 864000 uV +[    5.964170] Freeing unused kernel memory: 248K (ffffffc000993000 - ffffffc0009d1000) 
-[    5.828098] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 936000 uV +[    5.971235] Freeing alternatives memory: 44K (ffffffc0009d1000 - ffffffc0009dc000) 
-[    5.837907] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop=1024000 uV +[    6.223078] init: Console is alive 
-[    5.847742] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 668, quot_offset[ 7]=   0 +[    6.223171] init: - watchdog - 
-[    5.857528] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 863, quot_offset[ 7]= 195 +[    7.023605] usbcore: registered new interface driver usbfs 
-[    5.868380] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]= 975, quot_offset[ 7]= 110 +[    7.023647] usbcore: registered new interface driver hub 
-[    5.879319] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1120, quot_offset[ 7]= 145 +[    7.028018] usbcore: registered new device driver usb 
-[    5.890329] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop +[    7.034330] Button Hotplug driver version 0.4.1 
-[    5.901560] pmd9655_s4: supplied by e-smps1-reg +[    7.040746] SCSI subsystem initialized 
-[    5.908031] cpr3_mem_acc_init: npu: not using memory accelerator regulator +[    7.046926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
-[    5.912290] npu_corner: fused      NOM: open-loop= 840000 uV +[    7.047206] ehci-platform: EHCI generic platform driver 
-[    5.919237] npu_corner: fused    TURBO: open-loop= 912000 uV +[    7.059055] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy 
-[    5.926902] ipq_audio soc:sound@0: qca-i2s-codec-dai <-> qca-i2s-dai mapping ok +[    7.065854] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout 
-[    5.931171] ipq_audio soc:sound@0: qca-tdm-codec-dai <-> qca-tdm-dai mapping ok +[    7.065874] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868 
-[    5.953238] hctosys: unable to open rtc device (rtc0) +[    7.272746] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy 
-[    5.958783] ALSA device list: +[    7.280154] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout 
-[    5.958803]   #0: ipq8074_snd_card +[    7.280174] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868 
-[    5.962405] VFS: Mounted root (squashfs filesystem) readonly on device 31:26. +[    7.488167] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
-[    5.964169] Freeing unused kernel memory: 248K (ffffffc000993000 - ffffffc0009d1000) +[    7.488200] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 
-[    5.971241] Freeing alternatives memory: 44K (ffffffc0009d1000 - ffffffc0009dc000) +[    7.492722] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 
-[    6.223160] init: Console is alive +[    7.500116] xhci-hcd xhci-hcd.0.auto: irq 245, io mem 0x08a00000 
-[    6.223253] init: - watchdog - +[    7.509065] hub 1-0:1.0: USB hub found 
-[    7.023680] usbcore: registered new interface driver usbfs +[    7.515034] hub 1-0:1.0: 1 port detected 
-[    7.023722] usbcore: registered new interface driver hub +[    7.518720] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
-[    7.028099] usbcore: registered new device driver usb +[    7.522681] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 
-[    7.034406] Button Hotplug driver version 0.4.1 +[    7.527979] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    7.039005] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/button@1[0]' - status (0) +[    7.535713] hub 2-0:1.0: USB hub found 
-[    7.040778] SCSI subsystem initialized +[    7.543848] hub 2-0:1.0: 1 port detected 
-[    7.044659] libata version 3.00 loaded. +[    7.547541] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    7.046988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +[    7.551479] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 
-[    7.047266] ehci-platform: EHCI generic platform driver +[    7.556897] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 
-[    7.059010] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy +[    7.564354] xhci-hcd xhci-hcd.1.auto: irq 246, io mem 0x08c00000 
-[    7.065812] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout +[    7.573210] hub 3-0:1.0: USB hub found 
-[    7.065833] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868 +[    7.579259] hub 3-0:1.0: 1 port detected 
-[    7.272659] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy +[    7.582922] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    7.280061] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout +[    7.586894] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 
-[    7.280081] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868 +[    7.592215] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    7.488047] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[    7.599935] hub 4-0:1.0: USB hub found 
-[    7.488080] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 +[    7.608082] hub 4-0:1.0: 1 port detected 
-[    7.492599] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 +[    8.225775] init: - preinit - 
-[    7.499998] xhci-hcd xhci-hcd.0.auto: irq 245, io mem 0x08a00000 +Press the [f] key and hit [enter] to enter failsafe mode 
-[    7.508947] hub 1-0:1.0: USB hub found +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
-[    7.514914] hub 1-0:1.0: 1 port detected +Before mount_root 
-[    7.518590] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +Info: init ubi volumes on ntgrdata raw partition 
-[    7.522563] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 +[   10.372501] ubi0: attaching mtd31 
-[    7.527860] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. +[   10.760763] ubi0: scanning is finished 
-[    7.535595] hub 2-0:1.0: USB hub found +[   10.767032] ubi0: attached mtd31 (name "ntgrdata", size 100 MiB) 
-[    7.543729] hub 2-0:1.0: 1 port detected +[   10.767055] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
-[    7.547412] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   10.772095] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
-[    7.551361] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 +[   10.778787] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
-[    7.556778] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 +[   10.785643] ubi0: good PEBs: 800, bad PEBs: 0, corrupted PEBs: 0 
-[    7.564234] xhci-hcd xhci-hcd.1.auto: irq 246, io mem 0x08c00000 +[   10.792406] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128 
-[    7.573090] hub 3-0:1.0: USB hub found +[   10.798664] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 856308182 
-[    7.579139] hub 3-0:1.0: 1 port detected +[   10.805699] ubi0: available PEBs: 89, total reserved PEBs: 711, PEBs reserved for bad PEB handling: 80 
-[    7.582798] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   10.814648] ubi0: background thread "ubi_bgt0d" started, PID 209 
-[    7.586774] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 +UBI device number 0, total 800 LEBs (101580800 bytes, 96.9 MiB),[   10.832022] ubi1: attaching mtd23 
-[    7.592095] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. + available 89 LEBs (11300864 bytes, 10.8 MiB), LEB size 126976 bytes (124.0 KiB) 
-[    7.599817] hub 4-0:1.0: USB hub found +Info: attach ubi device on ntgrdata success! 
-[    7.607963] hub 4-0:1.0: 1 port detected +Info: init ubi volumes on dnidata raw partition 
-[    8.225864] init: - preinit - +[   10.855062] ubi1: scanning is finished 
-[   10.380276] ubi0: attaching mtd31 +[   10.859589] ubi1 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 24, need 80 
-[   10.768856] ubi0: scanning is finished +[   10.860060] ubi1: attached mtd23 (name "dnidata", size 5 MiB) 
-[   10.775125] ubi0: attached mtd31 (name "ntgrdata", size 100 MiB) +[   10.868831] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
-[   10.775147] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes +[   10.874729] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
-[   10.780189] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 +[   10.881488] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 
-[   10.786881] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 +[   10.888349] ubi1: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0 
-[   10.793736] ubi0: good PEBs: 800, bad PEBs: 0, corrupted PEBs: 0 +[   10.895120] ubi1: user volume: 4, internal volumes: 1, max. volumes count: 128 
-[   10.800498] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128 +[   10.901020] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1588836612 
-[   10.806756] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 856308182 +[   10.908321] ubi1: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 24 
-[   10.813792] ubi0: available PEBs: 89, total reserved PEBs: 711, PEBs reserved for bad PEB handling: 80 +[   10.917615] ubi1: background thread "ubi_bgt1d" started, PID 223 
-[   10.822741] ubi0: background thread "ubi_bgt0d" started, PID 209 +UBI device number 1, total 40 LEBs (5079040 bytes, 4.8 MiB), available LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) 
-[   10.873126] ubi1: attaching mtd23 +Infoattach ubi device on dnidata success
-[   10.894625] ubi1: scanning is finished +libubierror!: cannot get information about "/dev/ubi0" 
-[   10.899145] ubi1 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 24, need 80 +        error 2 (No such file or directory
-[   10.899617] ubi1: attached mtd23 (name "dnidata", size 5 MiB) +ubinfoerror!: error while probing "/dev/ubi0" 
-[   10.908380] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes +        error 2 (No such file or directory
-[   10.914280] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 +libubierror!cannot get information about "/dev/ubi0" 
-[   10.921045] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 +        error 2 (No such file or directory
-[   10.927906] ubi1: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0 +ubimkvolerror!error while probing "/dev/ubi0" 
-[   10.934675] ubi1: user volume: 4, internal volumes: 1, max. volumes count: 128 +          error 2 (No such file or directory
-[   10.940577] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1588836612 +libubi: error!cannot get information about "/dev/ubi0" 
-[   10.947878] ubi1: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 24 +        error 2 (No such file or directory
-[   10.957171] ubi1: background thread "ubi_bgt1d" started, PID 223 +ubinfoerror!error while probing "/dev/ubi0" 
-[   11.226705] procd: - early - +        error 2 (No such file or directory
-[   11.228257] procd: - watchdog - +libubierror!cannot get information about "/dev/ubi0" 
-[   11.845608] procd: - ubus - +        error 2 (No such file or directory
-[   12.848485] procd: - init - +ubimkvolerror!: error while probing "/dev/ubi0" 
-[   13.589086] jnl: driver (UFSD_HEAD UFSD_HEAD_r331462_b361) loaded at ffffffbffc136000 +          error 2 (No such file or directory
-[   13.641251] ufsd: module license 'Commercial product' taints kernel. +After mount_root 
-[   13.641278] Disabling lock debugging due to kernel taint +131072+records in 
-[   13.648415] ufsd: driver (UFSD_HEAD UFSD_HEAD_r331462_b361, acl, ioctl, sd2(5), tr, car) loaded at ffffffbffc144000 +131072+records out 
-[   13.648415] NTFSJ support included +131072 bytes (128.0KBcopied, 0.229944 se[   11.185668procd: - early 
-[   13.648415] Build_for__Netgear_AX6000_k4.4.60_2017-11-21_UFSD_HEAD_r331462_b361 +[   11.187176procd: - watchdog 
-[   13.651987] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k +conds556.7KB/s 
-[   13.674332] ufsd: Kernel .config hash: original 0x86aed0ce, current 0x6dd3d33e, not matched. +[   11.786328procd: - ubus 
-[   13.677312] ufsd: Kernel .config hash: original 0x86aed0ce, current 0x6dd3d33e, not matched +[   12.789176procd: - init 
-[   15.831339] NET: Registered protocol family 38 +Please press Enter to activate this console
-[   15.833773] pct2075 init! +sortstandard outputBroken pipe 
-[   15.834661] get i2c adapter 0 ok +Thu Jun 18 11:54:20 GMT 2020 
-[   15.837417] get i2c client pct2075 @ 0x48 ok +ln: /sbin/rmmodFile exists 
-[   15.840688] pct2075 probe +Loading data from /dev/mtd19 ...
-[   15.844970] pct2075 init success! +
-[   15.850848] cfg80211: World regulatory domain updated: +
-[   15.850872] cfg80211:  DFS Master region: unset +
-[   15.855787] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) +
-[   15.857698] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com +
-[   15.860163] ntfs: driver 2.1.32 [Flags: R/O MODULE]. +
-[   15.863014] Initializing XFRM netlink socket +
-[   15.863435] NET: Registered protocol family 15 +
-[   15.878252] ssdk_switch_device_num_init[842]:INFO:ess-switch dts node number1 +
-[   15.878298] ssdk_dt_get_switch_node[737]:INFO:ess-switch DT exist! +
-[   15.878306] ssdk_dt_parse_access_mode[638]:INFO:switch_access_mode: local bus +
-[   15.878308] ssdk_dt_parse_access_mode[651]:INFO:switchreg_base_addr: 0x3a000000 +
-[   15.878310] ssdk_dt_parse_access_mode[652]:INFO:switchreg_size: 0x1000000 +
-[   15.878313] ssdk_dt_parse_mac_mode[213]:INFO:mac mode = 0x0 +
-[   15.878315] ssdk_dt_parse_mac_mode[222]:INFO:mac mode1 = 0xff +
-[   15.878317] ssdk_dt_parse_mac_mode[231]:INFO:mac mode2 = 0xd +
-[   15.878320] ssdk_dt_parse_phy_info[483]:INFO:qcom,port_phyinfo DT doesn't exist! +
-[   15.878325] ssdk_dt_parse_mdio[524]:INFO:mdio DT exist! +
-[   15.878340] ssdk_dt_parse_uniphy[250]:INFO:ess-uniphy DT exist! +
-[   15.878429] ssdk_dt_parse_intf_mac[584]:INFO:dp1 MAC bc:a5:11:a7:ae:f6 +
-[   15.878450] ssdk_dt_parse_intf_mac[584]:INFO:dp2 MAC bc:a5:11:a7:ae:f7 +
-[   15.878470] ssdk_dt_parse_intf_mac[584]:INFO:dp3 MAC bc:a5:11:a7:ae:f8 +
-[   15.878526] ssdk_dt_parse_intf_mac[584]:INFO:dp6 MAC 32:31:36:37:55:31 +
-[   15.878539] ssdk_plat_init start +
-[   15.954728] ssdk_ppe_clock_init[463]:INFO:ppe and uniphy clock init successfully! +
-[   15.954932] ssdk_probe[1861]:INFO:ess_rst doesn't exist! +
-[   15.998741] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) +
-[   16.004127] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) +
-[   16.011843] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) +
-[   16.021220] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) +
-[   16.029210] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) +
-[   16.038932] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) +
-[   16.048392] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) +
-[   16.056463] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) +
-[   16.064495] HPPE initializing... +
-[   16.072790] malibu_phy_api_ops_init[2827]:INFO:qca probe malibu phy driver succeeded! +
-[   16.083185] aquantia_phy_api_ops_init[2169]:INFO:qca probe aquantia phy driver succeeded! +
-[   16.088172] regi_init[3277]:INFO:Initializing HPPE!! +
-[   16.312428] ssdk_ppe_reset_init[728]:INFO:ppe reset successfully! +
-[   16.318199] qca_hppe_tdm_hw_init[453]:INFO:tdm setup num=96 +
-[   17.864602] ssdk_switch_register[1606]:INFO:Chip version 0x1500 +
-[   17.867585] qca_link_polling_select[1258]:INFO:link-polling-required node does not exist +
-[   17.873830] ssdk_switch_register[1631]:INFO:polling is selected +
-[   17.881549] regi_init[3281]:INFO:Initializing HPPE Done!! +
-[   17.886467] regi_init[3321]:INFO:qca-ssdk module init succeeded! +
-[   17.896836] tun: Universal TUN/TAP device driver, 1.6 +
-[   17.896858] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> +
-[   17.902981] EDMA ver 1 hw init +
-[   17.907148] EDMA HW Reset completed succesfully +
-[   17.910001] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) +
-[   17.914414] RxDesc:1 (15-15) RxFill:1 (7-7) +
-[   17.921957] GMAC4(ffffffc03a73d880) Invalid MAC@ - using 02:9c:fd:0e:ce:0e +
-[   17.924624] GMAC5(ffffffc039541880) Invalid MAC@ - using 7a:7d:6f:d3:d6:25 +
-[   17.932097] ********************************************************** +
-[   17.937595] * NSS Data Plane driver +
-[   17.944187] ********************************************************** +
-[   17.959044] Loading DNI-ENET driver +
-[   17.964920] l2tp_core: L2TP core driver, V2.0 +
-[   17.965436] l2tp_netlink: L2TP netlink interface +
-[   17.992765] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2 +
-[   17.992794] qca-nss 39000000.nss: Falling back to user helper +
-[   18.121828] nss_driver - fw of size 804672  bytes copied to load addr: 40000000nss_id : 0 +
-[   18.123664] Supported Frequencies -  +
-[   18.128972] 748.8 MHz 1.4976 GHz  +
-[   18.134955] 1.6896 GHz <1>  18.135999]  +
-[   18.157733] qca-nss 39400000.nss: Direct firmware load for qca-nss1.bin failed with error -2 +
-[   18.157763] qca-nss 39400000.nss: Falling back to user helper +
-[   18.169671] node size 2 # items 4 +
-[   18.170866] memory: 40000000 1073741824 (avl 954286080) items 4 +
-[   18.174187] ffffffbffc7e6e10: nss core 0 booted successfully +
-[   18.262920] nss_driver - fw of size 343360  bytes copied to load addr: 40800000, nss_id : 1 +
-[   18.263872] Supported Frequencies -  +
-[   18.270062] 748.8 MHz 1.4976 GHz  +
-[   18.276047] 1.6896 GHz <1>  18.277091]  +
-[   18.283389] sit: IPv6 over IPv4 tunneling driver +
-[   18.284865] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226loaded. +
-[   18.284885] node size 2 # items 4 +
-[   18.284888] memory: 40000000 1073741824 (avl 954589184) items 4 +
-[   18.284899] ffffffbffc7eb710: nss core 1 booted successfully +
-[   18.305998] dni-qos module init. +
-[   18.310377] gre: GRE over IPv4 demultiplexor driver +
-[   18.313753] ip_gre: GRE over IPv4 tunneling driver +
-[   18.319140] ip6_gre: GRE over IPv6 tunneling driver +
-[   18.324642] Ethernet Channel Bonding Driver: v3.7.1 (April 272011) +
-[   18.330316] QCA multicast snooping installed successfully +
-[   18.334851] ip6_tables: (C) 2000-2006 Netfilter Core Team +
-[   18.351670] XHTTP netlink: create netlink OK. +
-[   18.353090] ip_set: protocol 6 +
-[   18.376887] PPP generic driver version 2.4.2 +
-[   18.378889] nss_lag_init[354]:LAG Manager Installed +
-[   18.383156] NET: Registered protocol family 24 +
-[   18.385801] PPTP driver version 0.8.5 +
-[   18.392362] <NSS-CRYPTO>:module loaded Build_ID - 06/18/20, 19:39:55 SoC=ipq807x_64 +
-[   18.394159] crypto bench loaded - Build_ID - 06/18/20, 19:39:57 +
-[   18.405291] diag: IPC Logging disabled +
-[   18.411904] usbcore: registered new interface driver usb-storage +
-[   18.431056] u32 classifier +
-[   18.431072]     input device check on +
-[   18.432716]     Actions configured +
-[   18.438138] Mirror/redirect action on +
-[   18.458703] arp_tables: (C) 2002 David S. Miller +
-[   18.466332] Ebtables v2.registered +
-[   18.468641] l2tp_ppp: PPPoL2TP kernel driver, V2.0 +
-[   18.474769] nf_conntrack_rtsp v0.6.21 loading +
-[   18.480457] nf_nat_rtsp v0.6.21 loading +
-[   18.483137] PPP MPPE Compression module registered +
-[   18.494430] xt_time: kernel timezone is -0000 +
-[   20.026802] Not a bridge device, or device not found: br0 +
-[   20.040052] Not a bridge device, or device not found: br0 +
-[   20.042217] Not a bridge device, or device not found: br0 +
-[   20.057921] Not a bridge device, or device not found: br0 +
-[   20.058020] Not a bridge device, or device not found: br0 +
-[   29.098309] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null) +
-[   31.637742] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) +
-[   32.952074] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" startedPID 1732 +
-[   33.000991] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "vol_dal" +
-[   33.001019] UBIFS (ubi0:5): LEB size126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes +
-[   33.007465] UBIFS (ubi0:5): FS size: 4063232 bytes (3 MiB, 32 LEBs), journal size 1015809 bytes (MiB, 6 LEBs) +
-[   33.017353] UBIFS (ubi0:5): reserved for root: 191915 bytes (187 KiB) +
-[   33.027244] UBIFS (ubi0:5): media format: w4/r0 (latest is w4/r0), UUID AB8EDE61-8F4E-4659-B16B-03F6ED9245DE, small LPT model +
-[   36.398244] ECM init +
-[   36.398291] ECM database jhash random seed: 0xcd395b95 +
-[   36.420360] ECM init complete +
-[   36.630104] bond0: Removing slave eth4 +
-[   36.630126] bond0: option slaves: invalid value (-eth4) +
-[   36.632799] bond0: Removing slave eth0 +
-[   36.637853] bond0: option slaves: invalid value (-eth0) +
-[   36.656732] device eth0 entered promiscuous mode +
-[   36.657952] device eth1 entered promiscuous mode +
-[   36.661633] device eth5 entered promiscuous mode +
-[   36.667766] device eth2 entered promiscuous mode +
-[   36.670747] device eth3 entered promiscuous mode +
-[   36.677546] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready +
-[   36.680036] device eth4 entered promiscuous mode +
-[   36.751076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready +
-[   36.753053] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready +
-[   36.757677] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready +
-[   36.763665] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready +
-[   36.769470] IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready +
-[   36.775304] br0: port 5(eth3) entered forwarding state +
-[   36.779073] br0: port 5(eth3) entered forwarding state +
-[   36.784198] br0: port 4(eth2) entered forwarding state +
-[   36.789304] br0: port 4(eth2) entered forwarding state +
-[   36.794431] br0: port 3(eth5) entered forwarding state +
-[   36.799546] br0: port 3(eth5) entered forwarding state +
-[   36.804675] br0: port 2(eth1) entered forwarding state +
-[   36.809793] br0: port 2(eth1) entered forwarding state +
-[   36.814922] br0: port 1(eth0) entered forwarding state +
-[   36.820037] br0: port 1(eth0) entered forwarding state +
-[   36.841222] br0: port 5(eth3) entered disabled state +
-[   36.841275] br0: port 4(eth2) entered disabled state +
-[   36.845272] br0: port 3(eth5) entered disabled state +
-[   36.850198] br0: port 2(eth1) entered disabled state +
-[   36.855151] br0: port 1(eth0) entered disabled state +
-[   36.912536] eth2: PHY Link up speed: 1000 +
-[   36.912665] eth1: PHY Link up speed: 1000 +
-[   36.915620] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready +
-[   36.919633] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready +
-[   36.936710] eth4: PHY Link up speed: 1000 +
-[   36.936822] eth3: PHY Link up speed: 10 +
-[   36.940525] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready +
-[   36.943445] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready +
-[   38.574974] __mc_netlink_receive: Disable bridge snooping+
-[   38.590462] __mc_netlink_receiveEnable bridge snooping! +
-[   38.864352] br0port 5(eth3) entered forwarding state +
-[   38.864403] br0: port 5(eth3) entered forwarding state +
-[   38.868386] br0: port 4(eth2) entered forwarding state +
-[   38.873509] br0: port 4(eth2) entered forwarding state +
-[   38.878623] br0: port 2(eth1entered forwarding state +
-[   38.883746] br0port 2(eth1) entered forwarding state +
-[   38.917418] clear list +
-[   40.912634] eth2: PHY Link is down +
-[   40.912986] br0: port 4(eth2) entered disabled state +
-[   40.922549] eth1: PHY Link is down +
-[   40.932629] eth3: PHY Link is down +
-[   41.355604] __mc_netlink_receive: Disable bridge snooping! +
-[   41.453371] __mc_netlink_receiveDisable bridge snooping! +
-[   41.912686] br0: port 2(eth1entered disabled state +
-[   41.912993] br0port 5(eth3) entered disabled state +
-[   42.482011] wlan (4675)drop_caches: 3 +
-[   44.595898] configuring additional NSS pbufs +
-[   44.610528] additional pbufs of size 6000640 got added to NSS +
-[   44.676966] __mm_init_module  +
-[   44.728130] qdf_dbg_mask value is invalid +
-[   44.728151] Using the default module debug levels instead +
-[   44.731111] qdf_print_ctrl_register: Allocated print control object 0 +
-[   45.076694] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D) +
-[   45.086369] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved +
-[   45.106505] wlan: [4746: I:ANY] ath_tx99: Version 2.0 +
-[   45.106505] Copyright (c2010 Atheros Communications, Inc, All Rights Reserved +
-[   45.152546] ath_devCopyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved +
-[   45.189915] ath_da_pci (Atheros/multi-bss) +
-[   45.429327] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done +
-[   45.429389]  remoteproc0: q6v5-wcss is available +
-[   45.433765]  remoteproc0: Note: remoteproc is still under development and considered experimental. +
-[   45.438494]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. +
-[   45.466323]  remoteproc0: powering up q6v5-wcss +
-[   45.466418]  remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 796 +
-[   45.469848] Sanity check passed for the image +
-[   46.329838] glink_core_link_up glink is up +
-[   46.329973] allocate_rx_intent rx intent id 1 allocated +
-[   46.330063] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled +
-[   46.330182] Subsystem error monitoring/handling services are up +
-[   46.330199]  remoteproc0: remote processor q6v5-wcss is now up +
-[   46.330360] wlan: [4753: I:ANY] ol_ath_ahb_ssr: SSR event 3 +
-[   46.356096] allocate_rx_intent rx intent id allocated +
-[   46.361554] allocate_rx_intent rx intent id 3 allocated +
-[   46.366771] allocate_rx_intent rx intent id 4 allocated +
-[   46.371972] allocate_rx_intent rx intent id 5 allocated +
-[   46.377188] glink_xprt_open_event +
-[   46.383462] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffcbe8748 +
-[   46.384354] cnss: QMI WLFW service connected, state: 0x1 +
-[   46.384357] cnss: device_id : 0xffff mem mode : [0] +
-[   46.400978] allocate_rx_intent rx intent id 6 allocated +
-[   46.405384] deallocate_rx_intent rx intent id 6 deallocated +
-[   46.410520] Memory for FW, va: 0x000000004be40000, pa: 0x0x000000004be40000, size: 0x3d4000 +
-[   46.416823] cnss: BDF location : 0x000000004be00000 +
-[   46.424347] cnss: BDF IPQ8074/bdwlan.bin size 131072 +
-[   46.429510] cnss: BDF download response , result: 0, err: 0 +
-[   46.434764] cnss: per device BDF location : 0x000000004be20000 +
-[   46.439789] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 +
-[   46.448049] cnss: BDF download response , result: 0, err: 0 +
-[   46.536111] wlan: [4753: I:ANY] cnss_mode: Cold boot calibration +
-[   47.147838] Coldboot calibration wait started +
-[   47.148920] allocate_rx_intent rx intent id 6 allocated +
-[   47.151364] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.156610] allocate_rx_intent rx intent id 6 allocated +
-[   47.162487] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.167017] allocate_rx_intent rx intent id 6 allocated +
-[   47.173390] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.178100] allocate_rx_intent rx intent id 6 allocated +
-[   47.183489] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.188737] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.194370] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.199818] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.205485] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.210956] deallocate_rx_intent rx intent id 6 deallocated +
-[   47.653701] Coldboot calibration wait ended +
-[   47.657832] cnss: QMI WLFW service disconnected, state: 0x9 +
-[   47.657841] wlan: [4753: I:ANY] Coldboot calib successful: radio_id 0x65535 +
-[   47.658857] ath_ol_pci:  (Atheros/multi-bss+
-[   47.662887] wlan[4938: I:ANY] ol_ath_ahb_ssr: SSR event 0 +
-[   47.688513]  remoteproc0: stopped remote processor q6v5-wcss +
-[   47.688804] glink_core_link_down glink is down +
-[   47.694213] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done +
-[   47.752527] glink_xprt_close_event +
-[   47.809445] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done +
-[   47.809506]  remoteproc0: q6v5-wcss is available +
-[   47.814303]  remoteproc0: Note: remoteproc is still under development and considered experimental. +
-[   47.818639]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. +
-[   47.827664]  remoteproc0: powering up q6v5-wcss +
-[   47.837880]  remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 796 +
-[   47.842345] Sanity check passed for the image +
-[   48.122627] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready +
-[   48.123919] IPv6: ADDRCONF(NETDEV_UP): brwan: link is not ready +
-[   48.191782] brwan: port 1(eth4) entered disabled state +
-[   48.193100] dni-qos attached on eth4. +
-[   48.194814] glink_core_link_up glink is up +
-[   48.195117] Subsystem error monitoring/handling services are up +
-[   48.195134]  remoteproc0remote processor q6v5-wcss is now up +
-[   48.195186] wlan: [5017: I:ANY] ol_ath_ahb_ssr: SSR event 3 +
-[   48.215320] glink_xprt_open_event +
-[   48.220785] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled +
-[   48.222310] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready +
-[   48.252058] brwan: port 1(eth4) entered disabled state +
-[   48.254880] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready +
-[   48.264402] brwan: port 1(eth4) entered disabled state +
-[   48.267213] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready +
-[   48.323362] cnss: QMI WLFW service connected, state: 0x9 +
-[   48.323390] cnss: device_id : 0xffff mem mode : [0] +
-[   48.328711] Memory for FW, va: 0x000000004be40000, pa: 0x0x000000004be40000, size: 0x3d4000 +
-[   48.333399] cnss: BDF location : 0x000000004be00000 +
-[   48.340665] cnss: BDF IPQ8074/bdwlan.bin size 131072 +
-[   48.348358] cnss: BDF download response , result: 0, err: 0 +
-[   48.351016] cnss: per device BDF location : 0x000000004be20000 +
-[   48.356136] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 +
-[   48.364307] cnss: BDF download response , result: 0, err: 0 +
-[   48.399866] wlan: [5017: I:ANY] cnss_mode: Mission mode  +
-[   48.407220] wlan: [5017: I:ANY] qca_napi_create: napi instance 0 created on pipe 4 +
-[   48.407400] wlan: [5017: I:ANY] __ol_ath_attach(): Allocated soc ffffffc032b80880 +
-[   48.413776] btcoex_support 0 wlan_prio_gpio 0 +
-[   48.421313] wlan: [5017: I:ANY] nss-wifili:#1 register wifili function for soc  +
-[   48.425604] wlan: [5017: I:ANY] nss register id -1 nss config 1 Target Type 14  +
-[   48.432759] wlan: [5017: I:ANY] __ol_ath_attach: dev name soc0 +
-[   48.440049] wlan: [5017: I:ANY] Skipping BMI +
-[   48.445981] wlan: [5017: I:ANY] ol_ath_soc_attach() WMI attached. wmi_handle ffffffc0345bb400  +
-[   48.450387] wlan: [5017: I:ANY] htc_wmi_init() HT Create . ffffffc03294b000 +
-[   48.458865] wlan: [5017: I:ANY] htc_wmi_init() Skipping BMI Done.  +
-[   48.465617] wlan: [5017: I:ANY] htc_wmi_init 5307 host_enable 0 nss_nwifi_offload 0 +
-[   48.471853] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 785: AC Minfree buf allocation through module param (umac.ko) +
-[   48.479504] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 786:  OL_ACBKMinfree : 0 +
-[   48.479518] send_filled_buffers_to_user: Send Failed -3 drop_count = 1 +
-[   48.499825] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 787:  OL_ACBEMinfree : 0 +
-[   48.506266] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 788:  OL_ACVIMinfree : 0 +
-[   48.514839] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 789:  OL_ACVOMinfree : 0 +
-[   48.523351] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 809: num_peers 1058, num_vdevs 17, num_tids 8540 +
-[   48.535170] wlan: [5017: I:ANY] CDP soc attach success +
-[   48.542448] wlan: [5017: I:ANY] Soc attach success NSS config 3  +
-[   48.547507] wlan: [5017: I:ANY] htc_set_async_ep: htc_handle ffffffc03294b000, ep 2, value 1 +
-[   48.553697] wlan: [5017: I:ANY] htc_set_async_ep: htc_handle ffffffc03294b000, ep 3, value 1 +
-[   48.562369] wlan: [4768: I:ANY]  SVC ready arrival: 48.559926 +
-[   48.570453] wlan: [4768: I:ANY]  SVC ready execution: 48.559946 +
-[   48.576101] wlan: [4768: I:ANY]  SVC ready time to schedule: 0.000020 +
-[   48.581827] wlan: [4768: I:TIF] init_deinit_populate_phy_reg_cap: 334: FW wireless modes 0x7f9001 +
-[   48.588424] wlan: [4768: I:TIF] init_deinit_service_ready_event_handler: 118:  TT support 1, Wide BW Scan 1, SW cal 1 +
-[   48.597291] wlan: [4768: I:ANY] num_rf_chain:0x00000008   +
-[   48.607860] wlan: [4768: I:ANY] ht_cap_info:0x0000081f   +
-[   48.613237] wlan: [4768: I:ANY] vht_cap_info:0x738fe9fa   +
-[   48.618624] wlan: [4768: I:ANY] vht_supp_mcs:0x0000fffa +
-[   48.623917] wlan: [4768: I:TIF] init_deinit_service_ready_event_handler: 154: WMI mgmt service enabled +
-[   48.628963] wlan: [4768: I:TIF] init_deinit_service_ready_event_handler: 173: Wait for EXT message +
-[   48.638338] wlan: [4768: I:ANY]  SVC ext ready arrival: 48.559957 +
-[   48.647273] wlan: [4768: I:ANY]  SVC ext ready execution: 48.635916 +
-[   48.653430] wlan: [4768: I:ANY]  SVC ext ready time to schedule:0.075959 +
-[   48.659515] wlan: [4768: I:ANY] Num chain mask tables: 3 +
-[   48.666473] wlan: [4768: I:ANY] Dumping chain mask combo data +
-[   48.671758] wlan: [4768: I:ANY] table_id : 0 Num valid chainmasks: 25 +
-[   48.677397] wlan: [4768: I:ANY] table_id : 1 Num valid chainmasks: 7 +
-[   48.683821] wlan: [4768: I:ANY] table_id : 2 Num valid chainmasks: 8 +
-[   48.690232] wlan: [4768: I:ANY] chain mask combo end +
-[   48.696577] wlan: [4768: I:TIF] init_deinit_populate_hw_mode_capability: 223: num_hw_modes 2 +
-[   48.701523] wlan: [4768: I:TIF] init_deinit_populate_mac_phy_capability: 164: hw_mode_id 1 phy_bit_map 0x3 +
-[   48.709960] wlan: [4768: I:TIF] init_deinit_populate_mac_phy_capability: 187: total_mac_phy_cnt 2 +
-[   48.719412] wlan: [4768: I:TIF] init_deinit_populate_hw_mode_capability: 246: num radios is 2 +
-[   48.728356] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1072: HE_CAP Info = 2000109 +
-[   48.736862] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1073: Num HW modes = 2 +
-[   48.746062] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1074: Num PHY = 2 +
-[   48.754999] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1075: HW mode and MAC PHY CAP +
-[   48.763515] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1082: idx = 0 hw_mode_id = 1 pdev_id = 0 phy_id = 0 +
-[   48.773187] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1084:  11G  support = 0  +
-[   48.784399] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1085:  11A  support = 1  +
-[   48.793265] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1086:  11N  support = 1  +
-[   48.802157] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1087:  11AC support = 1  +
-[   48.811169] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1088:  11AX support = 1  +
-[   48.820201] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1090:  Supported bands = 2  +
-[   48.829227] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1092:  Ampdu density = 0 +
-[   48.838598] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1094:  Max BW supported 2G = 1  +
-[   48.847538] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1096:  2G - HT cap info = 381f  +
-[   48.857263] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1098:  2G - VHT cap info = 738fe992  +
-[   48.866897] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1100:  2G - Supported VHT MCS =fffa  +
-[   48.876883] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1102:  2G - HE cap  = 3294a31c  +
-[   48.887128] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1104:  2G - HE supp MCS = fffa  +
-[   48.896670] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1106:  2G - TX chain mask = 3  +
-[   48.906308] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1108:  2G - RX chain mask = 3 +
-[   48.915939] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1113:  HE_CAP_PHY_INFO_2G[0] = 0 HE_CAP_PHY_INFO_2G[1]=0 HE_CAP_PHY_INFO_2G [2]=0  +
-[   48.925500] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1116:  2G - HE_PPET5G_NUMSS_M1 =0 HE_PPET5G_RU_MASK=0 +
-[   48.939471] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1118:  5G - Max BW supported = 4  +
-[   48.951099] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1120:  5G - HT cap info = 381f  +
-[   48.960903] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1122:  5G - VHT cap info = 738fe9fa  +
-[   48.970370] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1124:  5G - Supported VHT MCS aaaa +
-[   48.980348] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1126:  5G - HE cap = 3294a340  +
-[   48.990424] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1128:  5G - HE supp MCS = ffaaaaaa  +
-[   48.999968] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1130:  5G - tx chain mask = ff +
-[   49.009860] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1132:  5G - RX chain mask = 255 +
-[   49.019496] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1137:  HE_CAP_PHY_INFO_5G[0] = 800c601c HE_CAP_PHY_INFO_5G[1]= 4801f02 HE_CAP_PHY_INFO_5G [2]=0 +
-[   49.029064] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1140:  5G - HE_PPET5G_NUMSS_M1 = 7 HE_PPET5G_RU_MASK=f +
-[   49.044249] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1142:  chain mask tableid= 0 +
-[   49.055959] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1082: idx = 1 hw_mode_id = 1 pdev_id = 1 phy_id = 1 +
-[   49.065160] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1084:  11G  support = 1  +
-[   49.076614] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1085:  11A  support = 0  +
-[   49.085555] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1086:  11N  support = 1  +
-[   49.094582] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1087:  11AC support = 1  +
-[   49.103789] eth4: PHY Link up speed: 1000 +
-[   49.112635] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1088:  11AX support = 1  +
-[   49.116801] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1090:  Supported bands = 1  +
-[   49.125919] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready +
-[   49.131284] wlan[4768I:TIF] init_deinit_print_service_ready_ex_params: 1092:  Ampdu density = 0 +
-[   49.131300] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1094:  Max BW supported 2G = 1  +
-[   49.131306] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1096:  2G - HT cap info = 381f  +
-[   49.131311] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1098:  2G - VHT cap info = 738b6992  +
-[   49.131316] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1100:  2G - Supported VHT MCS =ffaa  +
-[   49.131321] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1102:  2G - HE cap  = 3294a3ec  +
-[   49.131326] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1104:  2G - HE supp MCS = ffaa  +
-[   49.131331] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1106:  2G - TX chain mask = f  +
-[   49.131336] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1108:  2G - RX chain mask = 15 +
-[   49.131342] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1113:  HE_CAP_PHY_INFO_2G[0] = 800c6002 HE_CAP_PHY_INFO_2G[1]=4800302 HE_CAP_PHY_INFO_2G [2]=0  +
-[   49.131347] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1116:  2G - HE_PPET5G_NUMSS_M1 =3 HE_PPET5G_RU_MASK=3 +
-[   49.131352] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1118:  5G - Max BW supported = 1  +
-[   49.131357] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1120:  5G - HT cap info = 381f  +
-[   49.131362] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1122:  5G - VHT cap info = 738b69b2  +
-[   49.131371] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1124:  5G - Supported VHT MCS fffa +
-[   49.131376] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1126:  5G - HE cap = 3294a410  +
-[   49.131381] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1128:  5G - HE supp MCS = fffefffa  +
-[   49.131386] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1130:  5G - tx chain mask = 3 +
-[   49.131391] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1132:  5G - RX chain mask = 3 +
-[   49.131396] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1137:  HE_CAP_PHY_INFO_5G[0] = 0 HE_CAP_PHY_INFO_5G[1]= 0 HE_CAP_PHY_INFO_5G [2]=0 +
-[   49.131402] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1140:  5G - HE_PPET5G_NUMSS_M1 = 0 HE_PPET5G_RU_MASK=0 +
-[   49.131407] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1142:  chain mask tableid= 1 +
-[   49.131412] wlan: [4768: I:TIF] init_deinit_print_service_ready_ex_params: 1145: Preferred HW Mode = 1 Num Radios = 2 +
-[   49.131418] wlan: [4768: I:TIF] init_deinit_populate_phy_reg_cap: 342: num_phy_reg_cap 2 +
-[   49.131428] wlan: [4768: I:TIF] init_deinit_add_11ax_modes: 1270: Adding 11ax regulatory modes, +
-[   49.131434] wlan: [4768: I:TIF] init_deinit_add_11ax_modes: 1273:  phy_id = 0 wireless modes = f97f9001 +
-[   49.131438] wlan: [4768: I:TIF] init_deinit_add_11ax_modes: 1270: Adding 11ax regulatory modes, +
-[   49.131448] wlan: [4768: I:TIF] init_deinit_add_11ax_modes: 1273:  phy_id = 1 wireless modes = 680680c +
-[   49.131459] wlan: [4768: I:ANY] Dumping chain mask combo data for table : 0 +
-[   49.131464] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000001 +
-[   49.131468] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000002 +
-[   49.131473] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000004 +
-[   49.131478] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000008 +
-[   49.131482] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000010 +
-[   49.131487] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000020 +
-[   49.131492] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000040 +
-[   49.131496] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000080 +
-[   49.131501] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000003 +
-[   49.131506] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000009 +
-[   49.131510] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000030 +
-[   49.131515] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000090 +
-[   49.131520] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000090 +
-[   49.131524] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000050 +
-[   49.131533] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x000000a0 +
-[   49.131538] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000011 +
-[   49.131543] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000022 +
-[   49.131548] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000044 +
-[   49.131552] wlan: [4768: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000088 +
-[   49.131557] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000007 +
-[   49.131562] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000070 +
-[   49.131566] wlan: [4768: I:ANY] supported_flags: 0x7000001f  chainmasks: 0x0000000f +
-[   49.131571] wlan: [4768: I:ANY] supported_flags: 0x7000001f  chainmasks: 0x000000f0 +
-[   49.131576] wlan: [4768: I:ANY] supported_flags: 0xf000001f  chainmasks: 0x00000077 +
-[   49.131580] wlan: [4768: I:ANY] supported_flags: 0xf000001f  chainmasks: 0x000000ff +
-[   49.131585] wlan: [4768: I:ANY] Dumping chain mask combo data for table : 1 +
-[   49.131590] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000001 +
-[   49.131594] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000002 +
-[   49.131599] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000004 +
-[   49.131604] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000008 +
-[   49.131612] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000003 +
-[   49.131617] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000007 +
-[   49.131622] wlan: [4768: I:ANY] supported_flags: 0x68000003  chainmasks: 0x0000000f +
-[   49.131626] wlan: [4768: I:ANY] Dumping chain mask combo data for table : 2 +
-[   49.131631] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000001 +
-[   49.131636] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000002 +
-[   49.131641] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000004 +
-[   49.131645] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000008 +
-[   49.131650] wlan: [4768: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000003 +
-[   49.131655] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000009 +
-[   49.131659] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000007 +
-[   49.131664] wlan: [4768: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x0000000f +
-[   49.131669] wlan: [4768: I:TIF] init_deinit_populate_dbr_ring_cap: 264: Num DMA Capabilities = 2 +
-[   49.131681] wlan: [4768: I:TIF] init_deinit_derive_band_to_mac_param: 423: 5G radio -pdev_id = 0 start_freq = 4910 end_freq =6100 +
-[   49.131687] wlan: [4768: I:TIF] init_deinit_derive_band_to_mac_param: 406: 2G radio - pdev_id = 1 start_freq = 2312 end_freq= 2732 +
-[   49.131838] wlan: [4768: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 326: dfs_offload 1 +
-[   49.131957] wlan: [4768: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 312: Do not allocate DFS object for 2G, pdev_id = 1 +
-[   49.148464] wlan: [4768: I:TIF] init_deinit_update_pdev_tgt_info: 969: CDP PDEV ATTACH success +
-[   49.162924] wlan: [4768: I:TIF] init_deinit_update_pdev_tgt_info: 969: CDP PDEV ATTACH success +
-[   49.263258] wlan: [4768: I:TIF] init_deinit_prepare_send_init_cmd: 473: FW version 0x30c0e14  +
-[   49.263265] wlan: [4768: I:TIF] init_deinit_prepare_send_init_cmd: 477: 0x2758be4c +
-[   49.263278] wlan: [4768: I:ANY] copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 +
-[   49.493155] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter +
-[   49.499190] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter +
-[   49.499376] wlan: [4768: I:ANY]  WMI ready arrival: 49.496944 +
-[   49.499381] wlan: [4768: I:ANY]  WMI ready execution: 49.496954 +
-[   49.499385] wlan: [4768: I:ANY]  WMI ready time to schedule: 0.000010 +
-[   49.499393] wlan: [4768: I:ANY] dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112 +
-[   49.499438] wlan: [4768: I:ANY] ast hash_elems: 16384, max_ast_idx: 4112 +
-[   49.499559] wlan: [4768: I:ANY] ready_extract_init_status_tlv:+
-[   49.499585] wlan: [5017: I:ANY] ol_ath_connect_htc() WMI is ready +
-[   49.527160] wlan: [5017: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wifi_dfs_psoc_enable: 408: dfs_offload 1 +
-[   49.527176] wlan: [5017: I:ANY] ol_ath_soc_attach() connect HTC.  +
-[   49.527180] wlan: [5017: I:ANY] bypasswmi : 0 +
-[   49.527185] wlan: [5017: I:ANY] 7ol_ath_lowi_wmi_event_attach: called +
-[   49.527197] wlan: [5017: I:ANY] 7ol_ath_phyerr_attach: called +
-[   49.527368] wlan: [5017: I:ANY] 7ol_ath_rtt_meas_report_attach: called +
-[   49.527374] wlan: [5017: I:ANY] ol_ath_soc_attach() UMAC attach .  +
-[   49.527398] wlan: [5017: I:ANY] ath_lowi_if_netlink_init LOWI Netlink successfully created +
-[   49.527439] wlan: [5017: I:ANY] __ol_ath_attach: pdev_netdev name wifi0 +
-[   49.527444] wlan: [5017: I:ANY] Skip txrx_pdev_attach_target +
-[   49.527449] wlan: [5017: I:ANY] BURSTING enabled by default +
-[   49.527655] wlan: [5017: I:ANY] ol_ath_pdev_attach interface_id 0 +
-[   49.527668] wlan: [5017: I:ANY]  phy id = 0 Modes supported +
-[   49.527682] wlan: [5017: I:ANY]  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 +
-[   49.527837] wlan: [5017: I:ANY]  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100 +
-[   49.527842] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update +
-[   49.527847] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update +
-[   49.527852] wlan: [5017: I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case  +
-[   49.527874] wlan: [5017: I:ANY] EXT NSS Supported +
-[   49.528166] wlan: [5017: I:ANY] OL Resmgr Init-ed +
-[   49.528402] wlan: [5017: I:ANY] acfg_attach: 3187: Netlink socket created:ffffffc0345ba400 +
-[   49.528413] wlan: [5017: I:ANY] rate power table override is only supported for AR98XX +
-[   49.528418] wlan: [5017: I:ANY] ol_ath_stats_attach: periodic_chan_stats:+
-[   49.530074] wlan: [5017: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 25 +
-[   49.530078] wlan: [5017: I:ANY]  +
-[   49.530112] wlan: [0: I:ANY] ol_ath_pdev_attach: Set global_ic[1] ..ptr:ffffffbffd356590 +
-[   49.530119] wlan: [0: I:ANY] pdev(ffffffc0362fa988) Enabling DBDC Repeater 1  +
-[   49.530145] wlan: [0: I:ANY] pdev(ffffffc0362fa988) is_primary 1  +
-[   49.530293] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   49.530306] wlan: [5017: I:ANY] Pdev = 0 Number of peers = 529 +
-[   49.532056] wlan: [5017: I:ANY] osif_wrap_attach:485 osif wrap attached +
-[   49.532078] wlan: [5017: I:ANY] osif_wrap_devt_init:446 osif wrap dev table init done +
-[   49.532084] wlan: [5017: I:ANY]  Wrap Attached: Wrap_com =ffffffc0345ba800 ic->ic_wrap_com=ffffffc0345ba800 &wrap_com->wc_devt=ffffffc0345ba800  +
-[   49.532280] wlan: [5017: I:ANY] __ol_ath_attach: needed_headroom reservation 60 +
-[   49.532286] wlan: [5017: I:ANY] Enabled Fraglist bit for the radio wifi0 features 41  +
-[   50.146233] brwan: port 1(eth4) entered forwarding state +
-[   50.154137] brwan: port 1(eth4) entered forwarding state +
-[   50.160104] wlan: [5017: I:ANY] ol_ath_thermal_mitigation_attach: -- +
-[   50.164890] wlan: [5017: I:ANY] __ol_ath_attach: pdev_netdev name wifi1 +
-[   50.170008] eth2: PHY Link up speed: 1000 +
-[   50.170274] eth3: PHY Link up speed: 10 +
-[   50.175730] IPv6: ADDRCONF(NETDEV_CHANGE): brwan: link becomes ready +
-[   50.175869] br0: port 4(eth2) entered forwarding state +
-[   50.175880] br0: port 4(eth2) entered forwarding state +
-[   50.175925] br0: port 5(eth3) entered forwarding state +
-[   50.175931] br0: port 5(eth3) entered forwarding state +
-[   50.207177] wlan: [5017: I:ANY] Skip txrx_pdev_attach_target +
-[   50.212260] wlan: [5017: I:ANY] BURSTING enabled by default +
-[   50.218202] wlan: [5017: I:ANY] ol_ath_pdev_attach interface_id 1 +
-[   50.223371] wlan: [5017: I:ANY]  phy id = 1 Modes supported +
-[   50.229586] wlan: [5017: I:ANY]  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 +
-[   50.235001] wlan: [5017: I:ANY]  Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 +
-[   50.242620] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update +
-[   50.254710] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update +
-[   50.263815] wlan: [5017: I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case  +
-[   50.272636] wlan: [5017: I:ANY] EXT NSS Supported +
-[   50.279919] wlan: [5017: I:ANY] OL Resmgr Init-ed +
-[   50.284797] wlan: [5017: I:ANY] acfg_attach: Offload using existing sock ffffffc0345ba400 +
-[   50.289394] wlan: [5017: I:ANY] rate power table override is only supported for AR98XX +
-[   50.297638] wlan: [5017: I:ANY] ol_ath_stats_attach: periodic_chan_stats:+
-[   50.305543] wlan: [5017: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 11 +
-[   50.312226] wlan: [5017: I:ANY]  +
-[   50.319941] wlan: [0: I:ANY] ol_ath_pdev_attach: Set global_ic[2] ..ptr:ffffffbffd356590 +
-[   50.323148] wlan: [0: I:ANY] pdev(ffffffc03d789c88Enabling DBDC Repeater 1  +
-[   50.331274] wlan[0E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   50.338283] wlan: [0: I:ANY] pdev(ffffffc03d789c88) is_primary 0  +
-[   50.346431] wlan: [5017: I:ANY] Pdev = 1 Number of peers = 529 +
-[   50.353199] wlan: [5017: I:ANY] osif_wrap_attach:485 osif wrap attached +
-[   50.358281] wlan: [5017: I:ANY] osif_wrap_devt_init:446 osif wrap dev table init done +
-[   50.364776] wlan: [5017: I:ANY]  Wrap Attached: Wrap_com =ffffffc036adb800 ic->ic_wrap_com=ffffffc036adb800 &wrap_com->wc_devt=ffffffc036adb800  +
-[   50.372755] wlan: [5017: I:ANY] __ol_ath_attach: needed_headroom reservation 60 +
-[   50.385838] wlan: [5017: I:ANY] Enabled Fraglist bit for the radio wifi1 features 41  +
-[   50.393309] wlan: [5017: I:ANY] ol_ath_thermal_mitigation_attach: -- +
-[   50.401229] wlan: [5017: I:ANY] ol_ath_ahb_probe num_radios=2, wifi_radios[0].sc = ffffffc032780880_radio_type = 2 +
-[   50.407331] wlan: [5017: I:ANY] ol_ath_ahb_probe num_radios=2, wifi_radios[1].sc = ffffffc0327c0880_radio_type = 2 +
-[   50.417447] wlan: [5017: I:ANY] ath_sysfs_diag_init: diag_fsattr  +
-[   50.428098] ath_ol_pci:  (Atheros/multi-bss) +
-[   50.470884] wlan: [5138: I:ANY] __sa_init_module  +
-[   50.505044] Removing athdebug proc file +
-[   50.505077] ath_dev: driver unloaded +
-[   50.535056] wlan: [5142: I:ANY] 6ath_tx99: driver unloaded +
-[   50.565012] ath_rate_atheros: driver unloaded +
-[   50.594990] ath_hal: driver unloaded +
-[   50.650436] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter +
-[   50.650887] wlan: [5152: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 13 +
-[   50.656229] wlan: [5152: I:ANY]  +
-[   50.688966] wlan: [5165: I:ANY] set TXBF_SND_PERIOD: value 100 wmi_status 0 +
-[   50.692880] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   50.694424] wlan: [0: I:ANY]  Disconnect_timeout value entered:10  +
-[   50.695571] wlan: [0: I:ANY]  reconfiguration_timeout value entered:60  +
-[   50.709155] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   50.865059] wlan_vap_create : enter. devhandle=0x327c0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 +
-[   50.865099] wlan: [5216: I:ANY] ol_ath_vap_create: vdev id 0  +
-[   50.872761] wlan: [5216: I:ANY] nss-wifi:#0 VAP# vap ffffffc029b90000  nss_if 32  +
-[   50.878599] wlan: [5216: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 1 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0  +
-[   50.886163] wlan: [5216: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x1a +
-[   50.908652] wlan: [5216: I:ANY] dp_lag_pdev_set_ap_vdev pdev(ffffffc03d789c88) ap_vdev ffffffc02960d000  +
-[   50.915693] wlan: [5216: I:ANY] nss-wifi:#0 VAP# vdev ffffffc0295db800 vap ffffffc029b90000 osif ffffffc0295e1880 nss_if 32  +
-[   50.925039] wlan: [5216: I:ANY] update nss wifiol ctx in osdev +
-[   50.936264] wlan: [5216: I:ANY] NSS wifi offload VAP create IF 32 nss_id -1  +
-[   50.941851] wlan: [5216: I:ANY] ****NSS radio_if 31**** +
-[   50.949166] wlan: [0: I:ANY] VDEV configuration success: 0 +
-[   50.954033] wlan: [5216: I:ANY] vap create ffffffc0295e1880 : if_num 32  +
-[   50.959688] wlan_vap_create : exit. devhandle=0x327c0880, vap=0x29b90000, opmode=IEEE80211_M_HOSTAP, flags=0x1. +
-[   50.966473] wlan: [0: I:ANY] Get MPSTA: vdev is NULL +
-[   50.976244] wlan: [5216: I:ANY] sa_api_init: Smart Antenna is not supported  +
-[   50.981472] wlan: [5216: I:ANY] sa_api_init: Smart Antenna is not supported  +
-[   50.988482] wlan: [5216: I:ANY] TX Checksum Bit: 1| SG Bit: 1| TSO Bit: 1 | LRO Bit: 0 +
-[   50.995563] wlan: [5216: I:ANY] WLAN-NSS: VAP NSS ops initialized  +
-[   51.003293] wlan: [5216: I:ANY] ol_ath_update_phymode_caps: Error Mode 0 not 2G or 5G +
-[   51.010071] wlan: [5216: I:ANY] VAP device ath1 created osifp: (ffffffc0295e1880) os_if: (ffffffc029b90000+
-[   51.017379] wlan[5216: I:ANY] 3VAP device ath1 created! +
-[   51.028893] wlan[5233: I:ANY] EXT NSS Supported +
-[   51.069157] wlan: [5251: I:ANY] setting hifi mode 5 +
-[   51.072276] WARNING: Fragmentation with HT mode NOT ALLOWED!! +
-[   51.085536] wlan: [5263: I:ANY] Setting Max Stations:256 +
-[   51.092719] wlan: [5265: I:ANY] DES SSID SET=NETGEAR22  +
-[   51.102542] wlan: [5269: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 +
-[   51.107546] wlan: [5270: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 +
-[   51.119695] wlan: [5272: I:ANY]  HE SU BFER already set with this value =1  +
-[   51.129122] wlan: [5273: I:ANY]  HE SU BFEE already set with this value =0  +
-[   51.135831] wlan: [5274: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 +
-[   51.141365] wlan: [5274: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 +
-[   51.155342] wlan: [5276: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 0 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0  +
-[   51.163643] eth1: PHY Link up speed: 1000 +
-[   51.185604] wlan: [5276: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x12 +
-[   51.191195] wlan: [5277: I:ANY] HE MU BFEE only supported in STA mode  +
-[   51.198583] wlan: [5278: I:ANY]  HE DL MU OFDMA already set with this value =1  +
-[   51.203180] br0: port 2(eth1entered forwarding state +
-[   51.210355] br0: port 2(eth1) entered forwarding state +
-[   51.215879] device ath1 entered promiscuous mode +
-[   51.432464]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1  +
-[   51.472671]  DEVICE IS DOWN ifname=ath1 +
-[   51.472709]  DEVICE IS DOWN ifname=ath1 +
-[   51.506253] wlan: [1708: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4  +
-[   51.506278] wlan: [1708: I:ANY] macaddr bc:a5:11:a7:ae:f6 +
-[   51.526410] wlan: [0: E:NSS] [nss-wifili]: Could not set astenty active for hw_idx = 2860 +
-[   51.532432] wlan: [1708: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff +
-[   51.533557] wlan: [1708: I:ANY]  +
-[   51.540671] wlan: [1708: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   51.543992] wlan: [1708: I:ANY]  +
-[   51.554550] wlan: [1708: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel +
-[   51.557693] wlan: [1708: I:ANY]  +
-[   51.568359] br0: port 6(ath1) entered forwarding state +
-[   51.569937] br0: port 6(ath1) entered forwarding state +
-[   51.574898] 8021q: adding VLAN 0 to HW filter on device ath1 +
-[   51.659083] wlan: [5303: I:ANY] osif_vap_init: Scan in progress.. Cancelling it. vap: 0xffffffc029b90000  +
-[   51.692435] wlan: [5303: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff +
-[   51.692461] wlan: [5303: I:ANY]  +
-[   51.698538] wlan: [5303: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   51.701848] wlan: [5303: I:ANY]  +
-[   51.712468] wlan: [5303: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel +
-[   51.715559] wlan: [5303: I:ANY]  +
-[   51.725965] wlan: [5304: I:ANY] osif_vap_init: Scan in progress.. Cancelling it. vap: 0xffffffc029b90000  +
-[   51.762432] wlan: [5304: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff +
-[   51.762457] wlan: [5304: I:ANY]  +
-[   51.768549] wlan: [5304: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   51.771846] wlan: [5304: I:ANY]  +
-[   51.782614] wlan: [5304: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel +
-[   51.785605] wlan: [5304: I:ANY]  +
-[   51.855347] br0: port 6(ath1) entered disabled state +
-[   51.892480] wlan: [5350: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff +
-[   51.892509] wlan: [5350: I:ANY]  +
-[   51.898585] wlan: [5350: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   51.901895] wlan: [5350: I:ANY]  +
-[   51.912487] wlan: [5350: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel +
-[   51.915607] wlan: [5350: I:ANY]  +
-[   51.926107] br0: port 6(ath1) entered forwarding state +
-[   51.927851] br0: port 6(ath1) entered forwarding state +
-[   51.932815] 8021q: adding VLAN to HW filter on device ath1 +
-[   52.237481] wlan (5579): drop_caches:+
-[   53.174381] __mc_netlink_receive: Disable bridge snooping! +
-[   53.213273] __mc_netlink_receive: Enable bridge snooping! +
-[   53.933468] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null) +
-[   54.366182] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter +
-[   54.369947] wlan: [6290: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 19 +
-[   54.371957] wlan: [6290: I:ANY]  +
-[   54.380391] wlan: [6290: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=58 +
-[   54.383181] wlan: [6290: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=106 +
-[   54.390933] wlan: [6290: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=122 +
-[   54.400047] wlan: [6290: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 19 +
-[   54.407533] wlan: [6290: I:ANY]  +
-[   54.415393] wlan: [6290: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=58 +
-[   54.418417] wlan: [6290: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=106 +
-[   54.426886] wlan: [6290: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=122 +
-[   54.434869] wlan: [4674: I:ANY] ol_acfg_handle_wifi_ioctl: req->cmd=74 not valid for radio interfaceit's for VAP +
-[   54.464475] wlan: [6356: I:ANY] set TXBF_SND_PERIOD: value 100 wmi_status 0 +
-[   54.471430] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   54.471472wlan[0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed +
-[   54.480534] wlan: [0: I:ANY]  Disconnect_timeout value entered:10  +
-[   54.488444] wlan: [0: I:ANY]  reconfiguration_timeout value entered:60  +
-[   54.740921] wlan_vap_create : enter. devhandle=0x32780880, opmode=IEEE80211_M_HOSTAP, flags=0x1 +
-[   54.741015] wlan: [6585: I:ANY] ol_ath_vap_create: vdev id 1  +
-[   54.749005] wlan: [6585: I:ANY] nss-wifi:#0 VAP# vap ffffffc029118000  nss_if 33  +
-[   54.754724wlan[6585: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 1 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: +
-[   54.762344] wlan: [6585: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x1a +
-[   54.784832] wlan: [6585: I:ANY] dp_lag_pdev_set_ap_vdev pdev(ffffffc0362fa988) ap_vdev ffffffc029b9f000  +
-[   54.791677] wlan: [6585: I:ANY] nss-wifi:#0 VAP# vdev ffffffc0363a7800 vap ffffffc029118000 osif ffffffc0296b0880 nss_if 33  +
-[   54.801375] wlan: [6585: I:ANY] update nss wifiol ctx in osdev +
-[   54.812403] wlan: [6585: I:ANY] NSS wifi offload VAP create IF 33 nss_id -1  +
-[   54.818147] wlan: [6585: I:ANY] ****NSS radio_if 30**** +
-[   54.825325] wlan: [0: I:ANY] VDEV configuration success: 0 +
-[   54.829867] wlan: [6585: I:ANY] vap create ffffffc0296b0880 : if_num 33  +
-[   54.835694] wlan_vap_create : exit. devhandle=0x32780880vap=0x29118000, opmode=IEEE80211_M_HOSTAP, flags=0x1+
-[   54.836205] wlan: [0: I:ANY] Get MPSTA: vdev is NULL +
-[   54.852139] wlan: [6585: I:ANY] sa_api_init: Smart Antenna is not supported  +
-[   54.857516] wlan: [6585: I:ANY] sa_api_init: Smart Antenna is not supported  +
-[   54.864422] wlan: [6585: I:ANY] TX Checksum Bit: 1| SG Bit: 1| TSO Bit: 1 | LRO Bit: 0 +
-[   54.871353] wlan: [6585: I:ANY] WLAN-NSS: VAP NSS ops initialized  +
-[   54.879318] wlan: [6585: I:ANY] ol_ath_update_phymode_caps: Error Mode 0 not 2G or 5G +
-[   54.885936] wlan: [6585: I:ANY] VAP device ath0 created osifp: (ffffffc0296b0880) os_if: (ffffffc029118000) +
-[   54.893260] wlan: [6585: I:ANY] 3VAP device ath0 created! +
-[   54.905359] wlan: [6684: I:ANY] EXT NSS Supported +
-[   54.983610] wlan: [6747: I:ANY] setting hifi mode 5 +
-[   54.990671] WARNING: Fragmentation with HT mode NOT ALLOWED!! +
-[   55.021582] wlan: [6773: I:ANY] Setting Max Stations:256 +
-[   55.025012] wlan: [6775: I:ANY] DES SSID SET=NETGEAR22  +
-[   55.035813] wlan: [6780: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7 +
-[   55.038618] wlan: [6785: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7 +
-[   55.050369] wlan: [6788: I:ANY]  HE SU BFER already set with this value =1  +
-[   55.061691] wlan: [6791: I:ANY]  HE SU BFEE already set with this value =0  +
-[   55.070027] wlan: [6793: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7 +
-[   55.070262] wlan: [6793: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7 +
-[   55.085797] wlan: [6796: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 0 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0  +
-[   55.092306] wlan: [6796: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x12 +
-[   55.116145] wlan: [6798: I:ANY] HE MU BFEE only supported in STA mode  +
-[   55.123581] wlan: [6800: I:ANY]  HE DL MU OFDMA already set with this value =1  +
-[   55.140915] device ath0 entered promiscuous mode +
-[   55.312455]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1  +
-[   55.352596]  DEVICE IS DOWN ifname=ath0 +
-[   55.352633]  DEVICE IS DOWN ifname=ath0 +
-[   55.386077] wlan: [1708: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4  +
-[   55.386104] wlan: [1708: I:ANY] macaddr bc:a5:11:a7:ae:f8 +
-[   55.412437wlan[1708: I:ANY] osif_vap_init: 7701: chan: 0xffffffc032781c10 +
-[   55.412463] wlan: [1708: I:ANY]  +
-[   55.418640] wlan: [0: I:ANY] OL vap start id: 1 + +
-[   55.421871] wlan: [0: I:ANY] OL vap_start - +
-[   55.526475] wlan: [0: E:NSS] [nss-wifili]: Could not set astenty active for hw_idx = 2756 +
-[   55.733961wlan[0: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7 +
-[   55.734022] wlan: [0: I:ANY] Setting Rx Decap type to 2 (Ethernet) +
-[   55.743575] wlan: [0: I:ANY] Setting Tx Encap type to 2 (Ethernet) +
-[   55.749643] wlan: [0: E:FILS discovery] target_if_fd_reconfig: 157: FILS is not enabled +
-[   55.755795] wlan: [0: I:ANY] sa_api_init: Smart Antenna is not supported  +
-[   55.772459] wlan: [1708: I:ANY] Mgmt Rate:6000(kbps) | Rate Code:0x10000003 +
-[   55.772873] br0: port 7(ath0) entered forwarding state +
-[   55.778221] br0: port 7(ath0) entered forwarding state +
-[   55.783440] 8021q: adding VLAN 0 to HW filter on device ath0 +
-[   55.878433] wlan: [6911: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   56.207667] XHTTP netlink: remove OK. +
-[   56.277623] XHTTP netlink: create netlink OK. +
-[   56.312143] xt_CT: netfilter: NOTRACK target is deprecated, use CT instead or upgrade iptables +
-[   56.563236] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) +
-[   56.964815] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null) +
-[   56.992515] __mc_netlink_receive: Disable bridge snooping! +
-[   57.017942] __mc_netlink_receive: Enable bridge snooping! +
-[   59.497608] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) +
-[   60.458751] wlan: [7959: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   60.703214] wlan: [7992: I:ANY] [ath1]Band steering events being sent to PID:7992 +
-[   60.703252] wlan: [7992: I:ANY] [ath0]Band steering events being sent to PID:7992 +
-[   63.543002] mc_attachbridge br0 is already attached +
-[   63.543045] __mc_netlink_receiveEnable bridge snooping! +
-[   64.547328] [DoS AttackSYN/ACK Scan] from source23.236.62.147, port 80, +
-[   64.645720] mc_attachbridge br0 is already attached +
-[   64.645732] __mc_netlink_receive: Enable bridge snooping! +
-[   65.541747] wlan: [0: I:ANY] OL vap start id: 0 + +
-[   65.541790] wlan: [0: I:ANY] OL vap_start - +
-[   65.545449] wlan: [0: I:ANY] Mgmt Rate:1000(kbps) | Rate Code:0x10000103 +
-[   65.648576] wlan: [0: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 +
-[   65.648638] wlan: [0: I:ANY] Setting Rx Decap type to 2 (Ethernet) +
-[   65.658180] wlan: [0: I:ANY] Setting Tx Encap type to 2 (Ethernet) +
-[   65.664268] wlan: [0: E:FILS discovery] target_if_fd_reconfig: 157: FILS is not enabled +
-[   65.670409] wlan: [0: I:ANY] sa_api_init: Smart Antenna is not supported  +
-[   67.993971] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 9444 +
-[   68.021611] UBIFS (ubi0:6): recovery needed +
-[   68.114329] UBIFS (ubi0:6): recovery completed +
-[   68.114408] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "vol_armor" +
-[   68.117808] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes2048 bytes/2048 bytes +
-[   68.125282] UBIFS (ubi0:6): FS size: 59551744 bytes (56 MiB, 469 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs) +
-[   68.135360] UBIFS (ubi0:6): reserved for root: 2812775 bytes (2746 KiB) +
-[   68.145601] UBIFS (ubi0:6): media format: w4/r0 (latest is w4/r0), UUID A31186D7-8C65-45A8-8947-23D401BBA23B, small LPT model +
-[   68.537098] guster accel_cb registered; mark shift 20 +
-[   72.119238] wlan: [10359: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 27 NSS = 4 SGI =0  ratekbps=1147100  +
-[   72.119583] wlan: [10359: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   72.131221] wlan: [10364: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 27 NSS = 4 SGI =0  ratekbps=1147100  +
-[   72.138797] wlan: [10364: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   72.162540] wlan: [10373: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 27 NSS = 4 SGI =0  ratekbps=1147100  +
-[   72.162861] wlan: [10373: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   72.189574] wlan: [10384: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   72.189616] wlan: [10384: I:ANY]  +
-[   73.223028] wlan: [10451: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029118000 +
-[   73.223070] wlan: [10451: I:ANY]  +
-[   73.658529] [DoS Attack: SYN/ACK Scan] from source: 46.31.116.71, port 80, +
-[   74.897797] [DoS Attack: SYN/ACK Scan] from source: 23.236.62.147, port 80, +
-[   75.682460] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   75.682511] wlan: [0: I:ANY]  +
-[   75.691810] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029118000 +
-[   75.694674] wlan: [0: I:ANY]  +
-[   79.744109] wlan: [10750: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 27 NSS = 4 SGI =0  ratekbps=1147100  +
-[   79.744547] wlan: [10750: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   81.882333] wlan: [11970: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 27 NSS = 4 SGI =0  ratekbps=1147100  +
-[   82.017010] [DoS Attack: SYN/ACK Scan] from source: 23.236.62.147, port 80, +
-[   82.373492] wlan: [12420: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  +
-[   85.702446] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   85.702482] wlan: [0: I:ANY]  +
-[   85.722458] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029118000 +
-[   85.722494] wlan: [0: I:ANY]  +
-[   89.163666] [DoS Attack: SYN/ACK Scan] from source: 23.236.62.147, port 80, +
-[   92.965896] [AUTH] vap-1(ath0): [7c:46:85:53:89:44]recv auth frame with algorithm 0 seq 1  +
-[   92.965896]  +
-[   92.966057] [ASSOC] vap-1(ath0): [7c:46:85:53:89:44]ieee80211_alloc_node: vap=0x29118000, nodecount=2, ni=0x328b2000, ni_bss_node=0x328b2000 bss_ref=2  +
-[   92.966057]  +
-[   92.975428] [AUTH] vap-1(ath0):[7c:46:85:53:89:44] send auth frmae  +
-[   92.975428]  [AUTH] vap-1(ath0):ieee80211_send_mgmt : Send AUTH frame subtype=b0 ni = 0xffffffc0328b2000 ni->ni_macaddr = 7c:46:85:53:89:44 +
-[   92.996166] [AUTH] vap-1(ath0):ieee80211_mgmt_frame_complete_handler : AUTH frame completion handler for ni = 0xffffffc0328b2000 ni->ni_macaddr = 7c:46:85:53:89:44 +
-[   92.996261] [ASSOC] vap-1(ath0):ieee80211_mlme_recv_assoc_request +
-[   92.996268] [ASSOC] vap-1(ath0):ieee80211_node_join: Number of associated STAs: 0 +
-[   92.996279] [ASSOC] vap-1(ath0):ieee80211_node_join: macaddr 7c:46:85:53:89:44 joined, incremented iv_sta_assoc(1) +
-[   92.996288] [ASSOC] vap-1(ath0):MU-Capable non-dedicated client joined, mac: 7c:46:85:53:89:44 +
-[   93.047879] [ASSOC] vap-1(ath0):ieee80211_send_mgmt : Send ASSOC frame subtype=10 ni = 0xffffffc0328b2000 ni->ni_macaddr = 7c:46:85:53:89:44 +
-[   93.048746] [ASSOC] vap-1(ath0):ieee80211_mlme_frame_complete_handler: frame 16 send to 7c:46:85:53:89:44, delayed_clean: 0, leve_ongoing:+
-[   93.048760] [ASSOC] vap-1(ath0):ol_ath_send_peer_assoc VHT Caps=33907120 HT Caps=16e RX MCS=fffe TX MCS=fffe  +
-[   93.048768] [ASSOC] vap-1(ath0):ol_ath_send_peer_assoc 11ax Param OPS=0  MACInfo= 9e3694 MCS_cnt=0 TX_MCS[80]=0 TX_MCS[160]=0 TX_MCS[80_80]=0 RX_MCS[80]=0 RX_MCS[160]=0 RX_MCS[80_80]=0 Phyinfo[0]=0 Phyinfo[1]=0 Phyinfo[2]=0  +
-[   93.048774] [ASSOC] vap-1(ath0):ol_ath_send_peer_assoc ni phymode=19 peer phymode=10  +
-[   93.048779] [ASSOC] vap-1(ath0):ol_ath_send_peer_assoc wmi_unified_peer_assoc_send for macaddr:7c:46:85:53:89:44  +
-[   93.117075] [AUTH] vap-1(ath0): macaddr :7c:46:85:53:89:44 authorize:+
-[   93.128385] wlan: [1708: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4  +
-[   93.133578] wlan: [1708: I:ANY] macaddr bc:a5:11:a7:ae:f8 +
-[   93.185004] [ASSOC] vap-1(ath0):_ieee80211_node_leave, macaddr 7c:46:85:53:89:44 left,  decremented iv_sta_assoc(0) +
-[   93.185062] [ASSOC] vap-1(ath0):MU-Capable client leaving mac 7c:46:85:53:89:44 Type: 0 +
-[   93.194262] [ASSOC] vap-1(ath0): [7c:46:85:53:89:44]ieee80211_sta_leave: 0x328b2000  +
-[   93.194262]  +
-[   93.203316] [ASSOC] vap-1(ath0): [7c:46:85:53:89:44]station free  +
-[   93.203316]  +
-[   93.211627] [ASSOC] vap-1(ath0): [7c:46:85:53:89:44]_ieee80211_free_node: vap=0x29118000, nodecount=2, ni=0x328b2000, ni_bss_node=0x2964e000  +
-[   93.211627]  +
-[   95.722468] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[   95.722514] wlan: [0: I:ANY]  +
-[   95.742463] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029118000 +
-[   95.742510] wlan: [0: I:ANY]  +
-[  105.742502] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029b90000 +
-[  105.742549] wlan: [0: I:ANY]  +
-[  105.762473] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc029118000 +
-[  105.762518] wlan: [0: I:ANY] +
  
-</nowiki> +Done!
-</WRAP>\\+
  
-==== OpenWrt bootlog ==== +The data center is Running ...
-/*** +
-<WRAP bootlog> +
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki> +
-</WRAP>\\ +
-***/+
  
-===== Tags ====+[   13.507979] jnl: driver (UFSD_HEAD UFSD_HEAD_r331462_b361) loaded at ffffffbffc136000 
-[[meta:tags|How to add tags]] +[   13.560250] ufsd: module license 'Commercial product' taints kernel. 
-{{tag>ipq8074 512flash 1024ram MU-MIMO unsupported}} +[   13.560277] Disabling lock debugging due to kernel taint 
-===== OpenWrt support =====+[   13.567366] ufsd: driver (UFSD_HEAD UFSD_HEAD_r331462_b361, acl, ioctl, sd2(5), tr, car) loaded at ffffffbffc144000 
 +[   13.567366] NTFSJ support included 
 +[   13.567366] Build_for__Netgear_AX6000_k4.4.60_2017-11-21_UFSD_HEAD_r331462_b361 
 +[   13.570987] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k 
 +[   13.593344] ufsd: Kernel .config hash: original 0x86aed0ce, current 0x6dd3d33e, not matched. 
 +[   13.596312] ufsd: Kernel .config hash: original 0x86aed0ce, current 0x6dd3d33e, not matched 
 +[   15.750785] NET: Registered protocol family 38 
 +[   15.753116] pct2075 init! 
 +[   15.754106] get i2c adapter 0 ok 
 +[   15.756859] get i2c client pct2075 @ 0x48 ok 
 +[   15.760133] pct2075 probe 
 +[   15.764410] pct2075 init success! 
 +[   15.770273] cfg80211: World regulatory domain updated: 
 +[   15.770297] cfg80211:  DFS Master region: unset 
 +[   15.775231] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) 
 +[   15.777359] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com 
 +[   15.780022] ntfs: driver 2.1.32 [Flags: R/O MODULE]. 
 +[   15.783225] Initializing XFRM netlink socket 
 +[   15.783693] NET: Registered protocol family 15 
 +[   15.798492] ssdk_switch_device_num_init[842]:INFO:ess-switch dts node number: 1 
 +[   15.798545] ssdk_dt_get_switch_node[737]:INFO:ess-switch DT exist! 
 +[   15.798553] ssdk_dt_parse_access_mode[638]:INFO:switch_access_mode: local bus 
 +[   15.798555] ssdk_dt_parse_access_mode[651]:INFO:switchreg_base_addr: 0x3a000000 
 +[   15.798557] ssdk_dt_parse_access_mode[652]:INFO:switchreg_size: 0x1000000 
 +[   15.798559] ssdk_dt_parse_mac_mode[213]:INFO:mac mode 0x0 
 +[   15.798562] ssdk_dt_parse_mac_mode[222]:INFO:mac mode1 0xff 
 +[   15.798564] ssdk_dt_parse_mac_mode[231]:INFO:mac mode2 0xd 
 +[   15.798566] ssdk_dt_parse_phy_info[483]:INFO:qcom,port_phyinfo DT doesn't exist! 
 +[   15.798572] ssdk_dt_parse_mdio[524]:INFO:mdio DT exist! 
 +[   15.798587] ssdk_dt_parse_uniphy[250]:INFO:ess-uniphy DT exist! 
 +[   15.798674] ssdk_dt_parse_intf_mac[584]:INFO:dp1 MAC bc:a5:11:a7:ae:f6 
 +[   15.798693] ssdk_dt_parse_intf_mac[584]:INFO:dp2 MAC bc:a5:11:a7:ae:f7 
 +[   15.798714] ssdk_dt_parse_intf_mac[584]:INFO:dp3 MAC bc:a5:11:a7:ae:f8 
 +[   15.798769] ssdk_dt_parse_intf_mac[584]:INFO:dp6 MAC 32:31:36:37:55:31 
 +[   15.798782] ssdk_plat_init start 
 +[   15.874735] ssdk_ppe_clock_init[463]:INFO:ppe and uniphy clock init successfully! 
 +[   15.874935] ssdk_probe[1861]:INFO:ess_rst doesn't exist! 
 +[   15.918181] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   15.923570] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) 
 +[   15.931288] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   15.940667] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) 
 +[   15.948655] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) 
 +[   15.958379] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) 
 +[   15.967836] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   15.975909] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) 
 +[   15.984363] HPPE initializing... 
 +[   15.992162] malibu_phy_api_ops_init[2827]:INFO:qca probe malibu phy driver succeeded! 
 +[   16.002657] aquantia_phy_api_ops_init[2169]:INFO:qca probe aquantia phy driver succeeded! 
 +[   16.007618] regi_init[3277]:INFO:Initializing HPPE!! 
 +[   16.232420] ssdk_ppe_reset_init[728]:INFO:ppe reset successfully! 
 +[   16.238192] qca_hppe_tdm_hw_init[453]:INFO:tdm setup num=96 
 +  17.784592] ssdk_switch_register[1606]:INFO:Chip version 0x1500 
 +[   17.787577qca_link_polling_select[1258]:INFO:link-polling-required node does not exist 
 +[   17.793819] ssdk_switch_register[1631]:INFO:polling is selected 
 +[   17.801540] regi_init[3281]:INFO:Initializing HPPE Done!! 
 +[   17.806448] regi_init[3321]:INFO:qca-ssdk module init succeeded! 
 +[   17.817721] tun: Universal TUN/TAP device driver, 1.6 
 +[   17.817742] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
 +[   17.824176] EDMA ver 1 hw init 
 +[   17.828031] EDMA HW Reset completed succesfully 
 +[   17.830884] Num rings TxDesc:1 (23-23) TxCmpl:1 (7-7) 
 +[   17.835408] RxDesc:1 (15-15) RxFill:1 (7-7) 
 +[   17.843732] GMAC4(ffffffc03a580880) Invalid MAC@ - using 9e:fc:8a:ae:d0:cf 
 +[   17.845591] GMAC5(ffffffc03a584880) Invalid MAC@ - using 36:57:32:41:f6:c5 
 +[   17.853434] ********************************************************** 
 +[   17.858462] * NSS Data Plane driver 
 +[   17.865047] ********************************************************** 
 +[   17.879953] Loading DNI-ENET driver 
 +[   17.886580] l2tp_core: L2TP core driver, V2.0 
 +[   17.887198] l2tp_netlink: L2TP netlink interface 
 +[   17.914913] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2 
 +[   17.914943] qca-nss 39000000.nss: Falling back to user helper 
 +/lib/firmware/qca-nss0.bin 33 
 +[   18.041991] nss_driver - fw of size 804672  bytes copied to load addr: 40000000, nss_id : 0 
 +[   18.043906] Supported Frequencies -  
 +[   18.049134] 748.8 MHz 1.4976 GHz  
 +[   18.055117] 1.6896 GHz [   18.056160]  
 +[   18.076845] qca-nss 39400000.nss: Direct firmware load for qca-nss1.bin failed with error -2 
 +[   18.076875] qca-nss 39400000.nss: Falling back to user helper 
 +[   18.088818] node size 2 # items 4 
 +[   18.089980] memory: 40000000 1073741824 (avl 954359808) items 4 
 +[   18.093303] ffffffbffc7e6e10: nss core 0 booted successfully 
 +/lib/firmware/qca-nss1.bin 33 
 +[   18.171901] nss_driver - fw of size 343360  bytes copied to load addr: 40800000, nss_id : 1 
 +[   18.172891] Supported Frequencies -  
 +[   18.179045] 748.8 MHz 1.4976 GHz  
 +[   18.185027] 1.6896 GHz [   18.186071]  
 +[   18.192349] sit: IPv6 over IPv4 tunneling driver 
 +[   18.193881] node size 2 # items 4 
 +[   18.193888] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. 
 +[   18.195542] dni-qos module init. 
 +[   18.195910] gre: GRE over IPv4 demultiplexor driver 
 +[   18.196411] ip_gre: GRE over IPv4 tunneling driver 
 +[   18.197615] ip6_gre: GRE over IPv6 tunneling driver 
 +[   18.199484] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) 
 +[   18.202233] QCA multicast snooping installed successfully 
 +[   18.203073] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   18.211415] XHTTP netlink: create netlink OK. 
 +[   18.212616] ip_set: protocol 6 
 +[   18.227483] PPP generic driver version 2.4.2 
 +[   18.229072] nss_lag_init[354]:LAG Manager Installed 
 +[   18.230505] NET: Registered protocol family 24 
 +[   18.231126] PPTP driver version 0.8.5 
 +[   18.233152] <NSS-CRYPTO>:module loaded Build_ID - 06/18/20, 19:39:55 SoC=ipq807x_64 
 +[   18.234020] crypto bench loaded - Build_ID - 06/18/20, 19:39:57 
 +[   18.237971] diag: IPC Logging disabled 
 +[   18.242810] usbcore: registered new interface driver usb-storage 
 +[   18.257510] u32 classifier 
 +[   18.257511]     input device check on 
 +[   18.257512]     Actions configured 
 +[   18.258357] Mirror/redirect action on 
 +[   18.269839] arp_tables: (C) 2002 David S. Miller 
 +[   18.274702] Ebtables v2.0 registered 
 +[   18.276417] l2tp_ppp: PPPoL2TP kernel driver, V2.0 
 +[   18.280647] nf_conntrack_rtsp v0.6.21 loading 
 +[   18.284733] nf_nat_rtsp v0.6.21 loading 
 +[   18.286359] PPP MPPE Compression module registered 
 +[   18.291945] xt_time: kernel timezone is -0000 
 +[   18.328751] memory: 40000000 1073741824 (avl 954662912) items 4 
 +[   18.333196] ffffffbffc7eb710: nss core 1 booted successfully 
 +[   19.947279] Not a bridge device, or device not found: br0 
 +[   19.960225] Not a bridge device, or device not found: br0 
 +[   19.962340] Not a bridge device, or device not found: br0 
 +[   19.977964] Not a bridge device, or device not found: br0 
 +[   19.978070] Not a bridge device, or device not found: br0 
 +sed: /etc/passwd: No such file or directory 
 +sed: /etc/shadow: No such file or directory 
 +/etc/rc.common: ./11_migrate-sysctl: line 5: cmp: not found 
 +find: /sys/bus/spi/devices/*/mtd: No such file or directory 
 +cfg026cb7 
 +cfg043777 
 +cfg05f087 
 +cfg06f087 
 +cfg02aa45 
 +Generating Rules... 
 +Done! 
 +wpspin:10503621 
 +ECC failed: 0 
 +ECC corrected: 0 
 +Number of bad blocks: 0 
 +Number of bbt blocks: 0 
 +Block size 131072, page size 2048, OOB size 64 
 +Dumping data starting at 0x00000000 and ending at 0x00380000... 
 +sn:67U19C5EF08BF 
 +SN: 67U19C5EF08BF 
 +lan mac: bc:a5:11:a7:ae:f6 
 +wan mac: bc:a5:11:a7:ae:f7 
 +wlan5g mac: bc:a5:11:a7:ae:f8 
 +BLUETOOTH MAC is invalid, please set in in bootloader 
 +/sbin/fan_ctrl.sh: line 40: can't create /sys/bus/i2c/devices/0-0049/fan1_target: Permission denied 
 +CRC check good on image file (0x1174)
  
-<color red>**Not supported.**</color>+Segment Addresses and Sizes as read from the PHY ROM image header:
  
 +Primary Iram Address: 0x5400
 +Primary Iram Size: 0x333d8
 +Primary Dram Address: 0x38800
 +Primary Dram Size: 0x158d0
  
-/*** if info available: uncomment and fill in 
-===== Supporting activities ===== 
-//Describe if there are any ongoing activities that might lead to OpenWrt support.// 
  
-  * OpenWrt forum thread(add link) +Loading IRAM:
-***/+
  
 +    Byte: 800:
 +    Byte: 1000:
 +    Byte: 1800:
 +    Byte: 2000:
 +    Byte: 2800:
 +    Byte: 3000:
 +    Byte: 3800:
 +    Byte: 4000:
 +    Byte: 4800:
 +    Byte: 5000:
 +    Byte: 5800:
 +    Byte: 6000:
 +    Byte: 6800:
 +    Byte: 7000:
 +    Byte: 7800:
 +    Byte: 8000:
 +    Byte: 8800:
 +    Byte: 9000:
 +    Byte: 9800:
 +    Byte: A000:
 +    Byte: A800:
 +    Byte: B000:
 +    Byte: B800:
 +    Byte: C000:
 +    Byte: C800:
 +    Byte: D000:
 +    Byte: D800:
 +    Byte: E000:
 +    Byte: E800:
 +    Byte: F000:
 +    Byte: F800:
 +    Byte: 10000:
 +    Byte: 10800:
 +    Byte: 11000:
 +    Byte: 11800:
 +    Byte: 12000:
 +    Byte: 12800:
 +    Byte: 13000:
 +    Byte: 13800:
 +    Byte: 14000:
 +    Byte: 14800:
 +    Byte: 15000:
 +    Byte: 15800:
 +    Byte: 16000:
 +    Byte: 16800:
 +    Byte: 17000:
 +    Byte: 17800:
 +    Byte: 18000:
 +    Byte: 18800:
 +    Byte: 19000:
 +    Byte: 19800:
 +    Byte: 1A000:
 +    Byte: 1A800:
 +    Byte: 1B000:
 +    Byte: 1B800:
 +    Byte: 1C000:
 +    Byte: 1C800:
 +    Byte: 1D000:
 +    Byte: 1D800:
 +    Byte: 1E000:
 +    Byte: 1E800:
 +    Byte: 1F000:
 +    Byte: 1F800:
 +    Byte: 20000:
 +    Byte: 20800:
 +    Byte: 21000:
 +    Byte: 21800:
 +    Byte: 22000:
 +    Byte: 22800:
 +    Byte: 23000:
 +    Byte: 23800:
 +    Byte: 24000:
 +    Byte: 24800:
 +    Byte: 25000:
 +    Byte: 25800:
 +    Byte: 26000:
 +    Byte: 26800:
 +    Byte: 27000:
 +    Byte: 27800:
 +    Byte: 28000:
 +    Byte: 28800:
 +    Byte: 29000:
 +    Byte: 29800:
 +    Byte: 2A000:
 +    Byte: 2A800:
 +    Byte: 2B000:
 +    Byte: 2B800:
 +    Byte: 2C000:
 +    Byte: 2C800:
 +    Byte: 2D000:
 +    Byte: 2D800:
 +    Byte: 2E000:
 +    Byte: 2E800:
 +    Byte: 2F000:
 +    Byte: 2F800:
 +    Byte: 30000:
 +    Byte: 30800:
 +    Byte: 31000:
 +    Byte: 31800:
 +    Byte: 32000:
 +    Byte: 32800:
 +    Byte: 33000:
  
-/*** if info availableuncomment and fill in +CRC-16 after loading IRAM0x6E0F
-===== Experimental firmware =====+
  
-//List experimental firmware download links here.//+Loading DRAM:
  
-//None at this time.//+    Byte: 800: 
 +    Byte: 1000: 
 +    Byte: 1800: 
 +    Byte: 2000: 
 +    Byte: 2800: 
 +    Byte: 3000: 
 +    Byte: 3800: 
 +    Byte: 4000: 
 +    Byte: 4800: 
 +    Byte: 5000: 
 +    Byte: 5800: 
 +    Byte: 6000: 
 +    Byte: 6800: 
 +    Byte: 7000: 
 +    Byte: 7800: 
 +    Byte: 8000: 
 +    Byte: 8800: 
 +    Byte: 9000: 
 +    Byte: 9800: 
 +    Byte: A000: 
 +    Byte: A800: 
 +    Byte: B000: 
 +    Byte: B800: 
 +    Byte: C000: 
 +    Byte: C800: 
 +    Byte: D000: 
 +    Byte: D800: 
 +    Byte: E000: 
 +    Byte: E800: 
 +    Byte: F000: 
 +    Byte: F800: 
 +    Byte: 10000: 
 +    Byte: 10800: 
 +    Byte: 11000: 
 +    Byte: 11800: 
 +    Byte: 12000: 
 +    Byte: 12800: 
 +    Byte: 13000: 
 +    Byte: 13800: 
 +    Byte: 14000: 
 +    Byte: 14800: 
 +    Byte: 15000: 
 +    Byte: 15800:
  
-  * External image (add link+0th port: Image load good - mailbox CRC-16 matches (0x6540
-  * trunk image (add link) +Image load good - mailbox CRC-16 matches
-  * ... +
-***/+
  
 + SSDK Init OK!
 +operation done.
  
-===== Hardware highlights ===== +Volume ID:   3 (on ubi0) 
-^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^ +Type:        dynamic 
-| EXAMPLE RT3052 @ 384 MHz   |  64 MiB  |  8 MiB  |  4x 10/100   bgn   |  1x 2.0    Yes    |   ?    |+Alignment:   
 +Size:        25 LEBs (3174400 bytes, 3.0 MiB) 
 +State:       OK 
 +Name:        vol_ntgrcryptD 
 +Character device major/minor: 247:4 
 +Volume ID:   4 (on ubi0) 
 +Type:        dynamic 
 +Alignment:   
 +Size:        5 LEBs (634880 bytes, 620.0 KiB) 
 +State:       OK 
 +Name:        vol_ntgrcryptK 
 +Character device major/minor: 247:5 
 +  28.862384] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null) 
 +  31.431028] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) 
 +Success! 
 +File descriptor 9 (pipe:[3435]) leaked on lvm invocation. Parent PID 1696: /bin/sh 
 +  Reading all physical volumes.  This may take a while... 
 +File descriptor 9 (pipe:[3435]) leaked on lvm invocation. Parent PID 1696: /bin/sh 
 +Successfully initialized wpa_supplicant 
 +ubirmvol: volume id not specified 
 +  32.712196] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 1732 
 +[   32.739452] UBIFS (ubi0:5): recovery needed 
 +[   32.828045] UBIFS (ubi0:5): recovery completed 
 +[   32.828125] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "vol_dal" 
 +  32.831414] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +  32.838979] UBIFS (ubi0:5): FS size: 4063232 bytes (3 MiB, 32 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) 
 +[   32.848891] UBIFS (ubi0:5): reserved for root: 191915 bytes (187 KiB) 
 +[   32.858752] UBIFS (ubi0:5): media format: w4/r0 (latest is w4/r0), UUID AB8EDE61-8F4E-4659-B16B-03F6ED9245DE, small LPT model 
 +connect error for client socket: No such file or directory 
 +Cannot initialize. 
 +Loading ArmorDebug[0] from /tmp/dal/d2d 
 +Loading ArmorStatus[0] from /tmp/dal/d2d 
 +Loading BSTResults[0] from /tmp/dal/d2d 
 +Loading BSTCfg[0] from /tmp/dal/d2d 
 +Loading DALHNotifyBST[0] from /tmp/dal/d2d 
 +Loading DALHNotifyDTN[0] from /tmp/dal/d2d 
 +Loading DALHNotifyNDN[0] from /tmp/dal/d2d 
 +Loading DeviceIdList[0] from /tmp/dal/d2d 
 +Loading DeviceIdList[1] from /tmp/dal/d2d 
 +Loading DeviceIdList[2] from /tmp/dal/d2d 
 +Loading DeviceIdList[3] from /tmp/dal/d2d 
 +Loading DeviceIdList[4] from /tmp/dal/d2d 
 +Loading DeviceIdList[5] from /tmp/dal/d2d 
 +Loading DeviceIdList[6] from /tmp/dal/d2d 
 +Loading DeviceIdList[7] from /tmp/dal/d2d 
 +Loading DeviceIdList[8] from /tmp/dal/d2d 
 +Loading DeviceIdList[9] from /tmp/dal/d2d 
 +Loading DeviceIdList[10] from /tmp/dal/d2d 
 +Loading DeviceIdList[11] from /tmp/dal/d2d 
 +Loading DeviceIdList[12] from /tmp/dal/d2d 
 +Loading DeviceIdList[13] from /tmp/dal/d2d 
 +Loading DeviceIdList[14] from /tmp/dal/d2d 
 +Loading DeviceIdList[15] from /tmp/dal/d2d 
 +Loading DeviceIdList[16] from /tmp/dal/d2d 
 +Loading DeviceIdList[17] from /tmp/dal/d2d 
 +Loading DeviceIdList[18] from /tmp/dal/d2d 
 +Loading DeviceIdList[19] from /tmp/dal/d2d 
 +Loading DeviceIdList[20] from /tmp/dal/d2d 
 +Loading DeviceIdList[21] from /tmp/dal/d2d 
 +Loading DeviceIdList[22] from /tmp/dal/d2d 
 +Loading DeviceIdList[23] from /tmp/dal/d2d 
 +Loading DeviceIdList[24] from /tmp/dal/d2d 
 +Loading DeviceIdList[25] from /tmp/dal/d2d 
 +Loading DeviceIdList[26] from /tmp/dal/d2d 
 +Loading DeviceIdList[27] from /tmp/dal/d2d 
 +Loading DeviceIdList[28] from /tmp/dal/d2d 
 +Loading DeviceIdList[29] from /tmp/dal/d2d 
 +Loading DeviceIdList[30] from /tmp/dal/d2d 
 +Loading DeviceIdList[31] from /tmp/dal/d2d 
 +Loading DeviceIdList[32] from /tmp/dal/d2d 
 +Loading DeviceIdList[33] from /tmp/dal/d2d 
 +Loading DeviceIdList[34] from /tmp/dal/d2d 
 +Loading DeviceIdList[35] from /tmp/dal/d2d 
 +Loading DeviceIdList[36] from /tmp/dal/d2d 
 +Loading DeviceIdList[37] from /tmp/dal/d2d 
 +Loading DeviceIdList[38] from /tmp/dal/d2d 
 +Loading DeviceIdList[39] from /tmp/dal/d2d 
 +Loading DeviceIdList[40] from /tmp/dal/d2d 
 +Loading DeviceIdList[41] from /tmp/dal/d2d 
 +Loading DeviceIdList[42] from /tmp/dal/d2d 
 +Loading DeviceIdList[43] from /tmp/dal/d2d 
 +Loading DeviceIdList[44] from /tmp/dal/d2d 
 +Loading DeviceIdList[45] from /tmp/dal/d2d 
 +Loading DeviceIdList[46] from /tmp/dal/d2d 
 +Loading DeviceIdList[47] from /tmp/dal/d2d 
 +Loading DeviceIdList[48] from /tmp/dal/d2d 
 +Loading DeviceIdList[49] from /tmp/dal/d2d 
 +Loading DeviceIdList[50] from /tmp/dal/d2d 
 +Loading DeviceIdList[51] from /tmp/dal/d2d 
 +Loading DeviceIdList[52] from /tmp/dal/d2d 
 +Loading DeviceIdList[53] from /tmp/dal/d2d 
 +Loading DeviceIdList[54] from /tmp/dal/d2d 
 +Loading DeviceIdList[55] from /tmp/dal/d2d 
 +Loading DeviceIdList[56] from /tmp/dal/d2d 
 +Loading DeviceIdList[57] from /tmp/dal/d2d 
 +Loading DeviceIdList[58] from /tmp/dal/d2d 
 +Loading DeviceIdList[59] from /tmp/dal/d2d 
 +Loading DeviceIdList[60] from /tmp/dal/d2d 
 +Loading DeviceIdList[61] from /tmp/dal/d2d 
 +Loading DeviceIdList[62] from /tmp/dal/d2d 
 +Loading DeviceIdList[63] from /tmp/dal/d2d 
 +Loading DeviceIdList[64] from /tmp/dal/d2d 
 +Loading DeviceIdList[65] from /tmp/dal/d2d 
 +Loading DeviceIdList[66] from /tmp/dal/d2d 
 +Loading DeviceIdList[67] from /tmp/dal/d2d 
 +Loading DeviceIdList[68] from /tmp/dal/d2d 
 +Loading DeviceIdList[69] from /tmp/dal/d2d 
 +Loading DeviceIdList[70] from /tmp/dal/d2d 
 +Loading DeviceIdList[71] from /tmp/dal/d2d 
 +Loading DeviceIdList[72] from /tmp/dal/d2d 
 +Loading DeviceIdList[73] from /tmp/dal/d2d 
 +Loading DeviceIdList[74] from /tmp/dal/d2d 
 +Loading DeviceIdList[75] from /tmp/dal/d2d 
 +Loading DeviceIdList[76] from /tmp/dal/d2d 
 +Loading DeviceIdList[77] from /tmp/dal/d2d 
 +Loading DeviceIdList[78] from /tmp/dal/d2d 
 +Loading DeviceIdList[79] from /tmp/dal/d2d 
 +Loading DeviceIdList[80] from /tmp/dal/d2d 
 +Loading DeviceIdList[81] from /tmp/dal/d2d 
 +Loading DeviceIdList[82] from /tmp/dal/d2d 
 +Loading DeviceIdList[83] from /tmp/dal/d2d 
 +Loading DeviceIdList[84] from /tmp/dal/d2d 
 +Loading DeviceIdList[85] from /tmp/dal/d2d 
 +Loading DeviceIdList[86] from /tmp/dal/d2d 
 +Loading DeviceIdList[87] froLoading DeviceIdList[192] from /tmp/dal/d2d 
 +Loading DeviceIdLisLoading Dilsignature[98] from /tmp/dal/d2d 
 +Loading Dilsignatureboot ************* 
 +1737 
 +Enjoy !!!!! D2D running 
 +start_service ************* 
 +switch init
  
 + SSDK Init OK!
 +operation done.
  
-/*** if info available: uncomment and fill in 
-===== Installation ===== 
-  - → [[:downloads|Obtain firmware]] 
-  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]] 
-  - → [[:downloads|Latest OpenWrt release]] 
  
-==== Installing OpenWrt ==== + SSDK Init OK! 
-***/+operation done.
  
 +[   36.207231] ECM init
 +[   36.207274] ECM database jhash random seed: 0x3c4dc419
 +[   36.209330] ECM init complete
 +dev.nss.general.redirect = 1
 +opmode = normal
 +[   36.422110] bond0: Removing slave eth4
 +[   36.422132] bond0: option slaves: invalid value (-eth4)
 +[   36.424897] bond0: Removing slave eth0
 +[   36.429860] bond0: option slaves: invalid value (-eth0)
 +[   36.448967] device eth0 entered promiscuous mode
 +[   36.450208] device eth1 entered promiscuous mode
 +[   36.453852] device eth5 entered promiscuous mode
 +[   36.459907] device eth2 entered promiscuous mode
 +[   36.463008] device eth3 entered promiscuous mode
 +[   36.469609] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
 +[   36.472263] device eth4 entered promiscuous mode
 +killall: acld: no process killed
 +[   36.562311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 +[   36.564341] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
 +[   36.568917] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
 +[   36.574794] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
 +[   36.580610] IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready
 +[   36.586546] br0: port 5(eth3) entered forwarding state
 +[   36.590304] br0: port 5(eth3) entered forwarding state
 +[   36.595438] br0: port 4(eth2) entered forwarding state
 +[   36.600538] br0: port 4(eth2) entered forwarding state
 +[   36.605667] br0: port 3(eth5) entered forwarding state
 +[   36.610782] br0: port 3(eth5) entered forwarding state
 +[   36.615909] br0: port 2(eth1) entered forwarding state
 +[   36.621025] br0: port 2(eth1) entered forwarding state
 +[   36.626154] br0: port 1(eth0) entered forwarding state
 +[   36.631268] br0: port 1(eth0) entered forwarding state
 +[   36.651919] br0: port 5(eth3) entered disabled state
 +[   36.651972] br0: port 4(eth2) entered disabled state
 +[   36.655964] br0: port 3(eth5) entered disabled state
 +[   36.660894] br0: port 2(eth1) entered disabled state
 +[   36.665849] br0: port 1(eth0) entered disabled state
 +[   38.356851] __mc_netlink_receive: Disable bridge snooping!
 +[   38.372954] __mc_netlink_receive: Enable bridge snooping!
 +[   38.387568] IPv6: ADDRCONF(NETDEV_UP): brwan: link is not ready
 +[   38.676206] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
 +Deleting static route ... Done!
 +Adding static route ... Done!
 +[   38.693278] clear list
 +check minidlna ... 
 +/sbin/cmddlna: line 508: kwilt: not found
 +grep: /tmp/etc/minidlna.conf: No such file or directory
 +/sbin/cmddlna: line 508: kwilt: not found
 +udhcp server (v0.9.8) started
 +/etc/rc.common: line 153: /etc/init.d/madwifi: not found
  
-/*** if info available: uncomment and fill in + SSDK Init OK! 
-===== Debricking ===== +operation done.
--> [[docs:guide-user:troubleshooting:generic.debrick]] +
-***/+
  
  
-/*** if info available: uncomment and fill in + SSDK Init OK! 
-===== Failsafe mode ===== +operation done.
--> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] +
-***/+
  
  
-/*** if info available: uncomment and fill in + SSDK Init OK! 
-===== Basic configuration ===== +operation done.
-After flashing, proceed with [[docs:guide-user:base-system:start|Basic configuration]]: Set up your Internet connection, configure wireless, configure USB port, etc. +
-***/+
  
  
-/*** if info available: uncomment and fill in + SSDK Init OK! 
-===== Specific configuration =====+operation done.
  
-<WRAP BOX 600px> +[wlan]===time:Thu Jun 18 11:54:45 UTC 2020   command:wlan countrycode==============  
-FIXME Please fill in real values for this devicethen remove the EXAMPLEs and the WRAP that encloses this text.+[wlan]===time:Thu Jun 18 11:54:46 UTC 2020   command:wlan updateconf boot==============  
 +[wlan]=========time:Thu Jun 18 11:54:46 UTC 2020 wlan updateconf start====== 
 +[wlan]=========time:Thu Jun 18 11:54:47 UTC 2020 wlan updateconf end====== 
 +cat: can't open '/tmp/orbi_type': No such file or directory 
 +sh: Satellite: unknown operand 
 +[wlan]===time:Thu Jun 18 11:54:47 UTC 2020   command:wlan down==============  
 +[wlan]=========time:Thu Jun 18 11:54:47 UTC 2020 wlan down start================== 
 +Save Data Success!, Parentid: 3751, parent process: (wlan),presentid: 4153,present: (config) 
 +  
 +lbd: stopping daemon 
 +Command failed: Not found 
 +[   41.099437] __mc_netlink_receive: Disable bridge snooping! 
 +killall: iface-mgr: no process killed 
 +killall: acfg_tool: no process killed 
 +acfg_tool: Issuing blocking call to wait for events 
 +lbd: stopping daemon 
 +Command failed: Not found 
 +[   41.202063] __mc_netlink_receive: Disable bridge snooping! 
 +killall: iface-mgr: no process killed 
 +acfg_tool: Issuing blocking call to wait for events 
 +qcawifi qcawificfg80211 disable radio wifi1 
 +qcawifi qcawificfg80211 disable radio wifi0 
 +/sbin/wlan: eval: line 1: can't create /sys/class/net/wifi1/led: nonexistent directory 
 +/sbin/wlan: eval: line 1: can't create /sys/class/net/wifi0/led: nonexistent directory 
 +qcawificfg80211: Interface type not supported force_off_led function 
 +sh: you need to specify whom to kill 
 +sh: 1: unknown operand 
 +sh: you need to specify whom to kill 
 +sh: 1: unknown operand 
 +[wlan]=========time:Thu Jun 18 11:54:48 UTC 2020 wlan down end================== 
 +[wlan]===time:Thu Jun 18 11:54:48 UTC 2020   command:wlan up==============  
 +[wlan]=========time:Thu Jun 18 11:54:48 UTC 2020 wlan up start================== 
 +Save Data Success!Parentid: 4307, parent process: (wlan),presentid: 4691,present: (config) 
 +  
 +acfg_tool: Issuing blocking call to wait for events 
 +qcawifi qcawificfg80211: enable radio wifi1 
 +acfg_tool: Issuing blocking call to wait for events 
 +[   42.182540] wlan (4715): drop_caches:
 +rm: can'remove 'q6_fw*': No such file or directory 
 +rm: can't remove 'fw_version.txt': No such file or directory 
 +[   44.259109] configuring additional NSS pbufs 
 +[   44.273404] additional pbufs of size 6000640 got added to NSS 
 +[   44.333522] __mm_init_module  
 +[   44.384669] qdf_dbg_mask value is invalid 
 +[   44.384688] Using the default module debug levels instead 
 +[   44.387648] qdf_print_ctrl_register: Allocated print control object 0 
 +[   44.736513] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D) 
 +[   44.746232] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved 
 +[   44.766670] wlan: [4814: I:ANY] ath_tx99: Version 2.0 
 +[   44.766670] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved 
 +[   44.812694] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved 
 +[   44.850242] ath_da_pci:  (Atheros/multi-bss) 
 +*********Starting cnssdaemon and initiating cold boot calibration************* 
 +[   45.084990] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done 
 +[   45.085051]  remoteproc0: q6v5-wcss is available 
 +[   45.089356]  remoteproc0: Note: remoteproc is still under development and considered experimental. 
 +[   45.094156]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. 
 +[   45.121747]  remoteproc0: powering up q6v5-wcss 
 +[   45.121842]  remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 796 
 +[   45.125260] Sanity check passed for the image 
 +[   45.979659] glink_core_link_up glink is up 
 +[   45.979800] allocate_rx_intent rx intent id 1 allocated 
 +[   45.982713] Subsystem error monitoring/handling services are up 
 +[   45.982755]  remoteproc0: remote processor q6v5-wcss is now up 
 +[   45.982792] wlan: [4821: I:ANY] ol_ath_ahb_ssr: SSR event 3 
 +[   45.999626] allocate_rx_intent rx intent id 2 allocated 
 +[   45.999684] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled 
 +[   46.010263] allocate_rx_intent rx intent id 3 allocated 
 +[   46.016866] allocate_rx_intent rx intent id 4 allocated 
 +[   46.021822] allocate_rx_intent rx intent id 5 allocated 
 +[   46.027075] glink_xprt_open_event 
 +[   46.032792] cnss: QMI WLFW service connected, state: 0x1 
 +[   46.033016] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffcbe8748 
 +[   46.033204] allocate_rx_intent rx intent id 6 allocated 
 +[   46.033275] deallocate_rx_intent rx intent id 6 deallocated 
 +[   46.055408] cnss: device_id : 0xffff mem mode : [0] 
 +[   46.061199] Memory for FW, va: 0x000000004be40000, pa: 0x0x000000004be40000, size: 0x3d4000 
 +[   46.066420] cnss: BDF location : 0x000000004be00000 
 +[   46.074432] cnss: BDF IPQ8074/bdwlan.bin size 131072 
 +[   46.079497] cnss: BDF download response , result: 0, err: 0 
 +[   46.084613] cnss: per device BDF location : 0x000000004be20000 
 +[   46.089614] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 
 +[   46.098040] cnss: BDF download response , result: 0, err: 0 
 +[   46.183826] wlan: [4821: I:ANY] cnss_mode: Cold boot calibration
  
-==== Network interfaces ==== + SSDK Init OK! 
-The default network configuration is: +operation done.
-^ Interface Name   ^ Description                  ^ Default configuration    ^ +
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | +
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | +
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | +
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | +
-</WRAP> +
-***/+
  
  
-/*** if info available: uncomment and fill in + SSDK Init OK! 
-==== Buttons ==== +operation done.
--> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). +
-Here, we merely name the buttons, so we can use them in the above Howto.+
  
-<WRAP BOX 600px> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. 
  
-The Netgear RAX120 (Nighthawk AX12) has the following buttons:+ SSDK Init OK! 
 +operation done.
  
-^ BUTTON                       ^ Event   ^ 
-| EXAMPLE Reset                |  reset  | 
-| EXAMPLE Secure Easy Setup    |   ses   | 
-| EXAMPLE No buttons at all.      -    | 
-</WRAP> 
-***/ 
  
 + SSDK Init OK!
 +operation done.
  
-===== Hardware ===== +[   46.795571] Coldboot calibration wait started 
-==== Info ==== +[   46.802929] allocate_rx_intent rx intent id 6 allocated 
-^ Architecture     | EXAMPLE MIPS                             | +[   46.803121] deallocate_rx_intent rx intent id 6 deallocated 
-^ Vendor           | EXAMPLE Ralink                           | +[   46.807284] allocate_rx_intent rx intent id 6 allocated 
-^ Bootloader       | EXAMPLE U-Boot                           | +[   46.812736] deallocate_rx_intent rx intent id 6 deallocated 
-^ System-On-Chip   | EXAMPLE Ralink RT3052 MIPS 24K V4.12   | +[   46.818012] allocate_rx_intent rx intent id 6 allocated 
-^ CPU/Speed        | EXAMPLE 451 MHz                          | +[   46.823488] deallocate_rx_intent rx intent id 6 deallocated 
-^ Flash-Chip       | EXAMPLE unkown                           | +[   46.828779] allocate_rx_intent rx intent id 6 allocated 
-^ Flash size       | EXAMPLE 8 MiB                            | +[   46.834376] deallocate_rx_intent rx intent id 6 deallocated 
-^ RAM              | EXAMPLE 64 MiB                           | +[   46.839720] deallocate_rx_intent rx intent id 6 deallocated 
-^ Wireless         | EXAMPLE RT2860v2 2.4GHz 802.11bgn        | +[   46.856869] deallocate_rx_intent rx intent id 6 deallocated 
-^ Ethernet         | EXAMPLE 10/100 Mbit/s wvlan support    | +[   46.857425] deallocate_rx_intent rx intent id 6 deallocated 
-^ Switch           | EXAMPLE Qualcomm Atheros QCA8337         | +[   46.861769] deallocate_rx_intent rx intent id 6 deallocated 
-^ USB              | EXAMPLE 1x 2.0                           | +[   46.867321] deallocate_rx_intent rx intent id 6 deallocated 
-^ Serial           | EXAMPLE [[#Serial|Yes]]                  | +cat: can't open '/tmp/orbi_project': No such file or directory 
-^ JTAG             | EXAMPLE [[#JTAG|Not populated]]          |+/etc/rc.common: line 153: can't open /tmp/device_tables/local_device_table: no such file 
 +[   47.295965] Coldboot calibration wait ended 
 +[   47.296770] cnss: QMI WLFW service disconnected, state: 0x9 
 +[   47.297020] wlan: [4821: I:ANY] Coldboot calib successful: radio_id 0x65535 
 +[   47.297985] ath_ol_pci:  (Atheros/multi-bss) 
 +[   47.302157] wlan: [4998: I:ANY] ol_ath_ahb_ssr: SSR event 0 
 +[   47.327540]  remoteproc0: stopped remote processor q6v5-wcss 
 +[   47.327830] glink_core_link_down glink is down 
 +[   47.332992] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done 
 +[   47.382613] glink_xprt_close_event 
 +[   47.450700] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done 
 +[   47.450779]  remoteproc0: q6v5-wcss is available 
 +[   47.455140]  remoteproc0: Note: remoteproc is still under development and considered experimental. 
 +[   47.459917]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. 
 +[   47.468932]  remoteproc0: powering up q6v5-wcss 
 +[   47.479040]  remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 796 
 +[   47.483664] Sanity check passed for the image 
 +Run ROUTER_BOARD net-scan config...The attached devices demo is Running ... 
 +dilapi.c: 1665:   DEBUG: DIL: Total InUse MAC Address Entries are :6 
 +mkdir: can't create directory '/dev/pts': File exists 
 +mknod: /dev/ptmx: File exists 
 +mknod: /dev/pts/0: Operation not permitted 
 +mknod: /dev/pts/1: O[   47.834400] glink_core_link_up glink is up 
 +[   47.839353] Subsystem error monitoring/handling services are up 
 +[   47.842722] glink_xprt_open_event 
 +[   47.849274]  remoteproc0: remote processor q6v5-wcss is now up 
 +[   47.852865] wlan: [5017: I:ANY] ol_ath_ahb_ssr: SSR event 3 
 +[   47.859335] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled 
 +peration not permitted 
 +The telnetenable is running ... 
 +device eth4 is not a slave of br0 
 +[   47.903379] brwan: port 1(eth4) entered disabled state 
 +[   47.910957] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready 
 +[   47.953006] cnss: QMI WLFW service connected, state: 0x9 
 +[   47.953029] cnss: device_id : 0xffff mem mode : [0] 
 +[   47.959166] Memory for FW, va: 0x000000004be40000, pa: 0x0x000000004be40000, size: 0x3d4000 
 +[   47.972699] cnss: BDF location : 0x000000004be00000 
 +[   47.972722] cnss: BDF IPQ8074/bdwlan.bin size 131072 
 +[   47.976650] cnss: BDF download response , result: 0, err: 0 
 +[   47.981915] cnss: per device BDF location : 0x000000004be20000 
 +[   47.992641] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 
 +[   47.994375] brwan: port 1(eth4) entered disabled state 
 +[   47.995275] cnss: BDF download response , result: 0, err: 0 
 +[   48.006173] dni-qos attached on eth4. 
 +[   48.011546] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready 
 +[   48.044096] brwan: port 1(eth4) entered disabled state 
 +[   48.046845] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready 
 +[   48.056407] brwan: port 1(eth4) entered disabled state 
 +[   48.059178] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready 
 +[   48.076500] wlan: [5017: I:ANY] cnss_mode: Mission mode  
 +dev.nss.general.redirect 
 +[   48.084182] wlan: [5017: I:ANY] qca_napi_create: napi instance 0 created on pipe 4 
 +[   48.084356] wlan: [5017: I:ANY] __ol_ath_attach(): Allocated soc ffffffc032980880 
 +[   48.090942] btcoex_support 0 wlan_prio_gpio 0 
 +[   48.098532] wlan: [5017: I:ANY] nss-wifili:#1 register wifili function for soc  
 +[   48.102787] wlan: [5017: I:ANY] nss register id -1 nss config 1 Target Type 14  
 +[   48.109902] wlan: [5017: I:ANY] __ol_ath_attach: dev name soc0 
 +[   48.117191] wlan: [5017: I:ANY] Skipping BMI 
 +[   48.123157] wlan: [5017: I:ANY] ol_ath_soc_attach() WMI attached. wmi_handle ffffffc03a5dc800  
 +[   48.127544] wlan: [5017: I:ANY] htc_wmi_init() HT Create . ffffffc035fc0000 
 +[   48.135918] wlan: [5017: I:ANY] htc_wmi_init() Skipping BMI Done.  
 +[   48.142778] wlan: [5017: I:ANY] htc_wmi_init 5307 host_enable 0 nss_nwifi_offload 0 
 +[   48.149021] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 785: AC Minfree buf allocation through module param (umac.ko) 
 +[   48.156610] send_filled_buffers_to_user: Send Failed -3 drop_count 
 +[   48.168380] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 786:  OL_ACBKMinfree : 0 
 +[   48.174894] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 787:  OL_ACBEMinfree : 0 
 +[   48.183491] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 788:  OL_ACVIMinfree : 0 
 +[   48.191989] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 789:  OL_ACVOMinfree : 0 
 +[   48.200501] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 809: num_peers 1058, num_vdevs 17, num_tids 8540 
 +[   48.211954] wlan: [5017: I:ANY] CDP soc attach success 
 +[   48.219598] wlan: [5017: I:ANY] Soc attach success NSS config 3  
 +[   48.224675] wlan: [5017: I:ANY] htc_set_async_ep: htc_handle ffffffc035fc0000, ep 2, value 1 
 +[   48.230824] wlan: [5017: I:ANY] htc_set_async_ep: htc_handle ffffffc035fc0000, ep 3, value 1 
 +[   48.239546] wlan: [5000: I:ANY]  SVC ready arrival: 48.237116 
 +[   48.247630] wlan: [5000: I:ANY]  SVC ready execution: 48.237131 
 +[   48.253272] wlan: [5000: I:ANY]  SVC ready time to schedule: 0.000015 
 +[   48.259004] wlan: [5000: I:TIF] init_deinit_populate_phy_reg_cap: 334: FW wireless modes 0x7f9001 
 +[   48.265609] wlan: [5000: I:TIF] init_deinit_service_ready_event_handler: 118:  TT support 1, Wide BW Scan 1, SW cal 1 
 +[   48.274470] wlan: [5000: I:ANY] num_rf_chain:0x00000008   
 +[   48.285040] wlan: [5000: I:ANY] ht_cap_info:0x0000081f   
 +[   48.290420] wlan: [5000: I:ANY] vht_cap_info:0x738fe9fa   
 +[   48.295807] wlan: [5000: I:ANY] vht_supp_mcs:0x0000fffa 
 +[   48.301097] wlan: [5000: I:TIF] init_deinit_service_ready_event_handler: 154: WMI mgmt service enabled 
 +[   48.306145] wlan: [5000: I:TIF] init_deinit_service_ready_event_handler: 173: Wait for EXT message 
 +[   48.315524] wlan: [5000: I:ANY]  SVC ext ready arrival: 48.237147 
 +[   48.324452] wlan: [5000: I:ANY]  SVC ext ready execution: 48.313111 
 +[   48.330611] wlan: [5000: I:ANY]  SVC ext ready time to schedule:0.075964 
 +[   48.336694] wlan: [5000: I:ANY] Num chain mask tables: 3 
 +[   48.343635] wlan: [5000: I:ANY] Dumping chain mask combo data 
 +[   48.348927] wlan: [5000: I:ANY] table_id : 0 Num valid chainmasks: 25 
 +[   48.354574] wlan: [5000: I:ANY] table_id : 1 Num valid chainmasks: 7 
 +[   48.360993] wlan: [5000: I:ANY] table_id : 2 Num valid chainmasks: 8 
 +[   48.367421] wlan: [5000: I:ANY] chain mask combo end 
 +[   48.373757] wlan: [5000: I:TIF] init_deinit_populate_hw_mode_capability: 223: num_hw_modes 2 
 +[   48.378708] wlan: [5000: I:TIF] init_deinit_populate_mac_phy_capability: 164: hw_mode_id 1 phy_bit_map 0x3 
 +[   48.387136] wlan: [5000: I:TIF] init_deinit_populate_mac_phy_capability: 187: total_mac_phy_cnt 2 
 +[   48.396593] wlan: [5000: I:TIF] init_deinit_populate_hw_mode_capability: 246: num radios is 2 
 +[   48.405534] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1072: HE_CAP Info 2000109 
 +[   48.414044] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1073: Num HW modes 
 +[   48.423243] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1074: Num PHY 
 +[   48.432179] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1075: HW mode and MAC PHY CAP 
 +[   48.440693] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1082: idx 0 hw_mode_id 1 pdev_id 0 phy_id 
 +[   48.450157] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1084:  11G  support  
 +[   48.461349] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1085:  11A  support 1  
 +[   48.470292] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1086:  11N  support 1  
 +[   48.479319] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1087:  11AC support 1  
 +[   48.488348] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1088:  11AX support 1  
 +[   48.497374] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1090:  Supported bands 2  
 +[   48.506404] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1092:  Ampdu density 
 +[   48.515777] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1094:  Max BW supported 2G 1  
 +[   48.524719] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1096:  2G - HT cap info 381f  
 +[   48.534441] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1098:  2G - VHT cap info = 738fe992  
 +[   48.544079] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1100:  2G - Supported VHT MCS =fffa  
 +[   48.554060] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1102:  2G HE cap  = 35fc731c  
 +[   48.564128] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1104:  2G HE supp MCS = fffa  
 +[   48.573852] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1106:  2G TX chain mask = 3  
 +  48.583488] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1108:  2G RX chain mask = 3 
 +[   48.593124] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1113:  HE_CAP_PHY_INFO_2G[0] = 0 HE_CAP_PHY_INFO_2G[1]=0 HE_CAP_PHY_INFO_2G [2]=0  
 +  48.602680] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1116:  2G - HE_PPET5G_NUMSS_M1 =0 HE_PPET5G_RU_MASK=0 
 +[   48.616652] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1118:  5G - Max BW supported = 4  
 +[   48.628294] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1120:  5G HT cap info = 381f  
 +[   48.638089] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1122:  5G - VHT cap info = 738fe9fa  
 +[   48.647554] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1124:  5G - Supported VHT MCS aaaa 
 +[   48.657535] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1126:  5G - HE cap = 35fc7340  
 +[   48.667603] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1128:  5G - HE supp MCS = ffaaaaaa  
 +[   48.677154] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1130:  5G - tx chain mask = ff 
 +[   48.687046] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1132:  5G - RX chain mask = 255 
 +[   48.696682] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1137:  HE_CAP_PHY_INFO_5G[0] = 800c601c HE_CAP_PHY_INFO_5G[1]= 4801f02 HE_CAP_PHY_INFO_5G [2]=0 
 +[   48.706331] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1140:  5G - HE_PPET5G_NUMSS_M1 = 7 HE_PPET5G_RU_MASK=f 
 +[   48.721458] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1142:  chain mask tableid= 0 
 +[   48.733163] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1082: idx = 1 hw_mode_id = 1 pdev_id = 1 phy_id = 1 
 +[   48.742343] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1084:  11G  support = 1  
 +[   48.753806] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1085:  11A  support = 0  
 +[   48.762742] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1086:  11N  support = 1  
 +[   48.771763] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1087:  11AC support = 1  
 +[   48.780795] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1088:  11AX support = 1  
 +[   48.789824] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1090:  Supported bands = 1  
 +[   48.799028] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1092:  Ampdu density = 0 
 +[   48.808230] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1094:  Max BW supported 2G = 1  
 +[   48.817176] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1096:  2G - HT cap info = 381f  
 +[   48.826893] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1098:  2G - VHT cap info = 738b6992  
 +[   48.836697] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1100:  2G - Supported VHT MCS =ffaa  
 +[   48.846747] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1102:  2G - HE cap  = 35fc73ec  
 +[   48.856578] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1104:  2G - HE supp MCS = ffaa  
 +[   48.866301] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1106:  2G - TX chain mask = f  
 +[   48.875936] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1108:  2G - RX chain mask = 15 
 +[   48.885572] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1113:  HE_CAP_PHY_INFO_2G[0] = 800c6002 HE_CAP_PHY_INFO_2G[1]=4800302 HE_CAP_PHY_INFO_2G [2]=0  
 +[   48.895131] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1116:  2G - HE_PPET5G_NUMSS_M1 =3 HE_PPET5G_RU_MASK=3 
 +[   48.910433] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1118:  5G - Max BW supported = 1  
 +[   48.922170] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1120:  5G - HT cap info = 381f  
 +[   48.931911] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1122:  5G - VHT cap info = 738b69b2  
 +[   48.941229] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1124:  5G - Supported VHT MCS fffa 
 +[   48.951200] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1126:  5G - HE cap = 35fc7410  
 +[   48.961276] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1128:  5G - HE supp MCS = fffefffa  
 +[   48.970816] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1130:  5G - tx chain mask = 3 
 +[   48.982429] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1132:  5G - RX chain mask = 3 
 +[   48.990342] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1137:  HE_CAP_PHY_INFO_5G[0] = 0 HE_CAP_PHY_INFO_5G[1]= 0 HE_CAP_PHY_INFO_5G [2]=0 
 +[   48.999818] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1140:  5G - HE_PPET5G_NUMSS_M1 = 0 HE_PPET5G_RU_MASK=0 
 +[   49.013790] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1142:  chain mask tableid= 1 
 +[   49.025415] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1145: Preferred HW Mode = 1 Num Radios = 2 
 +[   49.034621] wlan: [5000: I:TIF] init_deinit_populate_phy_reg_cap: 342: num_phy_reg_cap 2 
 +[   49.045382] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1270: Adding 11ax regulatory modes, 
 +[   49.053540] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1273:  phy_id = 0 wireless modes = f97f9001 
 +[   49.061954] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1270: Adding 11ax regulatory modes, 
 +[   49.071334] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1273:  phy_id = 1 wireless modes = 680680c 
 +[   49.080018] wlan: [5000: I:ANY] Dumping chain mask combo data for table : 0 
 +[   49.089385] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000001 
 +[   49.096243] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000002 
 +[   49.103883] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000004 
 +[   49.111516] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000008 
 +[   49.119161] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000010 
 +[   49.126799] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000020 
 +[   49.134437] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000040 
 +[   49.142073] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000080 
 +[   49.149715] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000003 
 +[   49.157355] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000009 
 +[   49.164993] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000030 
 +[   49.172632] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000090 
 +[   49.180267] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000090 
 +[   49.187910] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000050 
 +[   49.195551] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x000000a0 
 +[   49.203187] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000011 
 +[   49.210823] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000022 
 +[   49.218466] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000044 
 +[   49.226105] wlan: [5000: I:ANY] supported_flags: 0x70000018  chainmasks: 0x00000088 
 +[   49.233743] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000007 
 +[   49.241394] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000070 
 +[   49.249022] wlan: [5000: I:ANY] supported_flags: 0x7000001f  chainmasks: 0x0000000f 
 +[   49.256660] wlan: [5000: I:ANY] supported_flags: 0x7000001f  chainmasks: 0x000000f0 
 +[   49.264299] wlan: [5000: I:ANY] supported_flags: 0xf000001f  chainmasks: 0x00000077 
 +[   49.271933] wlan: [5000: I:ANY] supported_flags: 0xf000001f  chainmasks: 0x000000ff 
 +[   49.279576] wlan: [5000: I:ANY] Dumping chain mask combo data for table : 1 
 +[   49.287214] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000001 
 +[   49.294160] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000002 
 +[   49.301794] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000004 
 +[   49.309438] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000008 
 +[   49.317078] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000003 
 +[   49.324716] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x00000007 
 +[   49.332350] wlan: [5000: I:ANY] supported_flags: 0x68000003  chainmasks: 0x0000000f 
 +[   49.339994] wlan: [5000: I:ANY] Dumping chain mask combo data for table : 2 
 +[   49.347630] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000001 
 +[   49.354576] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000002 
 +[   49.362211] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000004 
 +[   49.369854] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000008 
 +[   49.377495] wlan: [5000: I:ANY] supported_flags: 0x70000007  chainmasks: 0x00000003 
 +[   49.385132] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000009 
 +[   49.392771] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x00000007 
 +[   49.400405] wlan: [5000: I:ANY] supported_flags: 0xf0000007  chainmasks: 0x0000000f 
 +[   49.408050] wlan: [5000: I:TIF] init_deinit_populate_dbr_ring_cap: 264: Num DMA Capabilities = 2 
 +[   49.415698] wlan: [5000: I:TIF] init_deinit_derive_band_to_mac_param: 423: 5G radio -pdev_id = 0 start_freq = 4910 end_freq =6100 
 +[   49.424724] wlan: [5000: I:TIF] init_deinit_derive_band_to_mac_param: 406: 2G radio - pdev_id = 1 start_freq = 2312 end_freq= 2732 
 +[   49.436403] wlan: [5000: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 326: dfs_offload 1 
 +[   49.448017] wlan: [5000: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 312: Do not allocate DFS object for 2G, pdev_id = 1 
 +net.bridge.bridge-nf-call-ip6tables = 0 
 +net.bridge.bridge-nf-ca[   49.474757] wlan: [5000: I:TIF] init_deinit_update_pdev_tgt_info: 969: CDP PDEV ATTACH success 
 +ll-iptables = 0 
 +[   49.491148] wlan: [5000: I:TIF] init_deinit_update_pdev_tgt_info: 969: CDP PDEV ATTACH success 
 +[   49.591506] wlan: [5000: I:TIF] init_deinit_prepare_send_init_cmd: 473: FW version 0x30c0e14  
 +[   49.591535] wlan: [5000: I:TIF] init_deinit_prepare_send_init_cmd: 477: 0x2758be4c 
 +[   49.599017] wlan: [5000: I:ANY] copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 
 +[   49.836192] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter 
 +[   49.842258] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter 
 +[   49.842470] wlan: [5000: I:ANY]  WMI ready arrival: 49.840043 
 +[   49.848719] wlan: [5000: I:ANY]  WMI ready execution: 49.840056 
 +[   49.854454] wlan: [5000: I:ANY]  WMI ready time to schedule: 0.000013 
 +[   49.860181] wlan: [5000: I:ANY] dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112 
 +[   49.866823] wlan: [5000: I:ANY] ast hash_elems: 16384, max_ast_idx: 4112 
 +[   49.875403] wlan: [5000: I:ANY] ready_extract_init_status_tlv:
 +[   49.881981] wlan: [5017: I:ANY] ol_ath_connect_htc() WMI is ready 
 +[   49.914357] wlan: [5017: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wifi_dfs_psoc_enable: 408: dfs_offload 1 
 +[   49.914397] wlan: [5017: I:ANY] ol_ath_soc_attach() connect HTC.  
 +[   49.922203] wlan: [5017: I:ANY] bypasswmi : 0 
 +[   49.928228] wlan: [5017: I:ANY] 7ol_ath_lowi_wmi_event_attach: called 
 +[   49.932555] wlan: [5017: I:ANY] 7ol_ath_phyerr_attach: called 
 +[   49.938969] wlan: [5017: I:ANY] 7ol_ath_rtt_meas_report_attach: called 
 +[   49.944792] wlan: [5017: I:ANY] ol_ath_soc_attach() UMAC attach .  
 +[   49.951305] wlan: [5017: I:ANY] ath_lowi_if_netlink_init LOWI Netlink successfully created 
 +[   49.957615] wlan: [5017: I:ANY] __ol_ath_attach: pdev_netdev name wifi0 
 +[   49.965787] wlan: [5017: I:ANY] Skip txrx_pdev_attach_target 
 +[   49.972286] wlan: [5017: I:ANY] BURSTING enabled by default 
 +[   49.978251] wlan: [5017: I:ANY] ol_ath_pdev_attach interface_id 0 
 +[   49.983500] wlan: [5017: I:ANY]  phy id = 0 Modes supported 
 +[   49.989734] wlan: [5017: I:ANY]  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 
 +[   49.995128] wlan: [5017: I:ANY]  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100 
 +[   50.002774] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update 
 +[   50.014833] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update 
 +[   50.024033] wlan: [5017: I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case  
 +[   50.033253] wlan: [5017: I:ANY] EXT NSS Supported 
 +[   50.040343] wlan: [5017: I:ANY] OL Resmgr Init-ed 
 +[   50.045210] wlan: [5017: I:ANY] acfg_attach: 3187: Netlink socket created:ffffffc03bcee800 
 +[   50.049812] wlan: [5017: I:ANY] rate power table override is only supported for AR98XX 
 +[   50.057973] wlan: [5017: I:ANY] ol_ath_stats_attach: periodic_chan_stats:
 +[   50.066503] wlan: [5017: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 25 
 +[   50.072731] wlan: [5017: I:ANY]  
 +[   50.080371] wlan: [0: I:ANY] ol_ath_pdev_attach: Set global_ic[1] ..ptr:ffffffbffd356590 
 +[   50.083667] wlan: [0: I:ANY] pdev(ffffffc036b2e188) Enabling DBDC Repeater 1  
 +[   50.091748] wlan: [0: I:ANY] pdev(ffffffc036b2e188) is_primary 1  
 +[   50.091818] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[   50.104857] wlan: [5017: I:ANY] Pdev = 0 Number of peers = 529 
 +[   50.113799] wlan: [5017: I:ANY] osif_wrap_attach:485 osif wrap attached 
 +[   50.118741] wlan: [5017: I:ANY] osif_wrap_devt_init:446 osif wrap dev table init done 
 +[   50.125248] wlan: [5017: I:ANY]  Wrap Attached: Wrap_com =ffffffc03bcee400 ic->ic_wrap_com=ffffffc03bcee400 &wrap_com->wc_devt=ffffffc03bcee400  
 +[   50.133248] wlan: [5017: I:ANY] __ol_ath_attach: needed_headroom reservation 60 
 +[   50.146252] wlan: [5017: I:ANY] Enabled Fraglist bit for the radio wifi0 features 41  
 +[   50.153742] wlan: [5017: I:ANY] ol_ath_thermal_mitigation_attach: -- 
 +[   50.161293] wlan: [5017: I:ANY] __ol_ath_attach: pdev_netdev name wifi1 
 +[   50.167720] wlan: [5017: I:ANY] Skip txrx_pdev_attach_target 
 +[   50.174056] wlan: [5017: I:ANY] BURSTING enabled by default 
 +[   50.179996] wlan: [5017: I:ANY] ol_ath_pdev_attach interface_id 1 
 +[   50.185241] wlan: [5017: I:ANY]  phy id = 1 Modes supported 
 +[   50.191470] wlan: [5017: I:ANY]  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 
 +[   50.196863] wlan: [5017: I:ANY]  Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 
 +[   50.204511] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update 
 +[   50.216577] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update 
 +[   50.225684] wlan: [5017: I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case  
 +[   50.234497] wlan: [5017: I:ANY] EXT NSS Supported 
 +[   50.241816] wlan: [5017: I:ANY] OL Resmgr Init-ed 
 +[   50.246684] wlan: [5017: I:ANY] acfg_attach: Offload using existing sock ffffffc03bcee800 
 +[   50.251287] wlan: [5017: I:ANY] rate power table override is only supported for AR98XX 
 +[   50.259450] wlan: [5017: I:ANY] ol_ath_stats_attach: periodic_chan_stats:
 +[   50.267420] wlan: [5017: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 11 
 +[   50.274120] wlan: [5017: I:ANY]  
 +[   50.281763] wlan: [0: I:ANY] ol_ath_pdev_attach: Set global_ic[2] ..ptr:ffffffbffd356590 
 +[   50.285055] wlan: [0: I:ANY] pdev(ffffffc037cfe188) Enabling DBDC Repeater 1  
 +[   50.293143] wlan: [0: I:ANY] pdev(ffffffc037cfe188) is_primary 0  
 +[   50.293207] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[   50.306246] wlan: [5017: I:ANY] Pdev = 1 Number of peers = 529 
 +[   50.315085] wlan: [5017: I:ANY] osif_wrap_attach:485 osif wrap attached 
 +[   50.320128] wlan: [5017: I:ANY] osif_wrap_devt_init:446 osif wrap dev table init done 
 +[   50.326638] wlan: [5017: I:ANY]  Wrap Attached: Wrap_com =ffffffc03bcefc00 ic->ic_wrap_com=ffffffc03bcefc00 &wrap_com->wc_devt=ffffffc03bcefc00  
 +[   50.334639] wlan: [5017: I:ANY] __ol_ath_attach: needed_headroom reservation 60 
 +[   50.347641] wlan: [5017: I:ANY] Enabled Fraglist bit for the radio wifi1 features 41  
 +[   50.355156] wlan: [5017: I:ANY] ol_ath_thermal_mitigation_attach: -- 
 +[   50.363031] wlan: [5017: I:ANY] ol_ath_ahb_probe num_radios=2, wifi_radios[0].sc = ffffffc032780880_radio_type = 2 
 +[   50.369088] wlan: [5017: I:ANY] ol_ath_ahb_probe num_radios=2, wifi_radios[1].sc = ffffffc0327a0880_radio_type = 2 
 +[   50.379293] wlan: [5017: I:ANY] ath_sysfs_diag_init: diag_fsattr  
 +[   50.389954] ath_ol_pci:  (Atheros/multi-bss) 
 +[   50.435156] wlan: [5234: I:ANY] __sa_init_module  
 +No Direct-Attach chipsets found. 
 +[   50.485069] Removing athdebug proc file 
 +[   50.485101] ath_dev: driver unloaded 
 +[   50.525035] wlan: [5238: I:ANY] 6ath_tx99: driver unloaded 
 +[   50.574913] ath_rate_atheros: driver unloaded 
 +[   50.614940] ath_hal: driver unloaded 
 +cat: can't open '1': No such file or directory 
 +[   50.669701] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter 
 +[   50.670171] wlan: [5248: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 13 
 +[   50.675481] wlan: [5248: I:ANY]  
 +Enable ol_stats by default for Hawkeye 
 +[   50.698596] wlan: [5257: I:ANY] set TXBF_SND_PERIOD: value 100 wmi_status 0 
 +[   50.702357] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[   50.703949] wlan: [0: I:ANY]  Disconnect_timeout value entered:10  
 +[   50.712705] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed 
 +[   50.719520] wlan: [0: I:ANY]  reconfiguration_timeout value entered:60  
 +cat: can't open '/sys/class/net/ath1/address': No such file or directory 
 +[   50.891928] wlan_vap_create : enter. devhandle=0x327a0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +[   50.891970] wlan: [5326: I:ANY] ol_ath_vap_create: vdev id 0  
 +  50.899544] wlan: [5326: I:ANY] nss-wifi:#0 VAP# vap ffffffc034080000  nss_if 32  
 +[   50.905412wlan: [5326: I:ANYol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 1 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 
 +  50.912961] wlan: [5326: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x1a 
 +[   50.935285] wlan: [5326: I:ANY] dp_lag_pdev_set_ap_vdev pdev(ffffffc037cfe188) ap_vdev ffffffc029b62c00  
 +[   50.942405] wlan: [5326: I:ANY] nss-wifi:#0 VAP# vdev ffffffc0295f9000 vap ffffffc034080000 osif ffffffc029650880 nss_if 32  
 +[   50.951895wlan: [5326: I:ANYupdate nss wifiol ctx in osdev 
 +[   50.963087] wlan: [5326: I:ANY] NSS wifi offload VAP create IF 32 nss_id -1  
 +[   50.968705] wlan: [5326: I:ANY] ****NSS radio_if 31**** 
 +[   50.976028] wlan: [0: I:ANY] VDEV configuration success: 0 
 +[   50.980864] wlan: [5326: I:ANY] vap create ffffffc029650880 : if_num 32  
 +[   50.986549] wlan_vap_create : exit. devhandle=0x327a0880, vap=0x34080000, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +[   50.987004] wlan: [0: I:ANY] Get MPSTA: vdev is NULL 
 +[   51.003077] wlan: [5326: I:ANY] sa_api_init: Smart Antenna is not supported  
 +[   51.008295] wlan: [5326: I:ANY] sa_api_init: Smart Antenna is not supported  
 +[   51.015327] wlan: [5326: I:ANY] TX Checksum Bit: 1SG Bit: 1| TSO Bit: 1 | LRO Bit: 0 
 +[   51.022345] wlan: [5326: I:ANY] WLAN-NSS: VAP NSS ops initialized  
 +[   51.030116] wlan: [5326: I:ANY] ol_ath_update_phymode_caps: Error Mode 0 not 2G or 5G 
 +[   51.036828] wlan: [5326: I:ANY] VAP device ath1 created osifp: (ffffffc029650880) os_if: (ffffffc034080000) 
 +[   51.044186] wlan: [5326: I:ANY] 3VAP device ath1 created! 
 +[   51.055605] wlan: [5343: I:ANY] EXT NSS Supported 
 +Invalid command : dni_vlan_pri 
 +sh: 192: unknown operand 
 +[   51.099639] wlan: [5361: I:ANY] setting hifi mode 5 
 +[   51.102813] WARNING: Fragmentation with HT mode NOT ALLOWED!! 
 +Error for wireless request "Set Fragmentation Threshold" (8B24) : 
 +    SET failed on device ath1 ; Invalid argument. 
 +[   51.117618] wlan: [5373: I:ANY] Setting Max Stations:256 
 +[   51.122625] wlan: [5375: I:ANY] DES SSID SET=NETGEAR22  
 +Interface doesn't accept private ioctl... 
 +stafwd (8BE0): Invali[   51.132323] wlan: [5379: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 
 +[   51.137177] wlan: [5380: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 
 +[   51.149266] wlan: [5382: I:ANY]  HE SU BFER already set with this value =1  
 +[   51.158793] wlan: [5383: I:ANY]  HE SU BFEE already set with this value =0  
 +[   51.165486] wlan: [5384: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 
 +[   51.170978] wlan: [5384: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3 
 +[   51.184837] wlan: [5386: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 0 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0  
 +[   51.193015] wlan: [5386: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x12 
 +[   51.216750] wlan: [5387: I:ANY] HE MU BFEE only supported in STA mode  
 +[   51.224428] wlan: [5388: I:ANY]  HE DL MU OFDMA already set with this value =1  
 +[   51.231186] device ath1 entered promiscuous mode 
 +d argument 
 +Interface doesn't accept private ioctl... 
 +vhtsubfee (8BE0): Invalid argument 
 +Interface doesn't accept private ioctl... 
 +vhtmubfee (8BE0): Invalid argument 
 +Interface doesn't accept private ioctl... 
 +he_mubfee (8BE0): Invalid argument 
 +sh: 0: unknown operand 
 +sh: 0: unknown operand 
 +sh: 0: unknown operand 
 +sh: ag: out of range 
 +[   51.422446]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1  
 +[   51.462663]  DEVICE IS DOWN ifname=ath1 
 +[   51.462700]  DEVICE IS DOWN ifname=ath1 
 +[   51.496182] wlan: [1703: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4  
 +[   51.496208] wlan: [1703: I:ANY] macaddr bc:a5:11:a7:ae:f6 
 +[   51.522432] wlan: [1703: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff 
 +[   51.522457] wlan: [1703: I:ANY]  
 +[   51.528535] wlan: [1703: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000 
 +[   51.531843] wlan: [1703: I:ANY]  
 +[   51.542422] wlan: [1703: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel 
 +[   51.545556] wlan: [1703: I:ANY]  
 +[   51.556168] br0: port 6(ath1) entered forwarding state 
 +[   51.557801] br0: port 6(ath1) entered forwarding state 
 +[   51.562787] 8021q: adding VLAN 0 to HW filter on device ath1 
 +[   51.567964] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready 
 +OK 
 +/sbin/wlan: eval: line 16: scan_interfaces: not found 
 +/sbin/wlan: eval: line 16: setup_interface: not found 
 +[   51.654950] wlan: [5422: I:ANY] osif_vap_init: Scan in progress.. Cancelling it. vap: 0xffffffc034080000  
 +[   51.692501] wlan: [5422: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff 
 +[   51.692531] wlan: [5422: I:ANY]  
 +[   51.698775] wlan: [5422: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000 
 +[   51.701920] wlan: [5422: I:ANY]  
 +[   51.712728] wlan: [5422: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel 
 +[   51.715638] wlan: [5422: I:ANY]  
 +[   51.726718] wlan: [5433: I:ANY] osif_vap_init: Scan in progress.. Cancelling it. vap: 0xffffffc034080000  
 +[   51.752430] wlan: [5433: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff 
 +[   51.752457] wlan: [5433: I:ANY]  
 +[   51.758533] wlan: [5433: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000 
 +[   51.761843] wlan: [5433: I:ANY]  
 +[   51.772477] wlan: [5433: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel 
 +[   51.775572] wlan: [5433: I:ANY]  
 +sh: 1: unknown operand 
 +sh: 0: unknown operand 
 +sh: out of range 
 +[   51.835117] br0: port 6(ath1) entered disabled state 
 +[   51.862455] wlan: [5456: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff 
 +[   51.862485] wlan: [5456: I:ANY]  
 +[   51.868562] wlan: [5456: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000 
 +[   51.871871] wlan: [5456: I:ANY]  
 +[   51.882478] wlan: [5456: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel 
 +[   51.885581] wlan: [5456: I:ANY]  
 +[   51.896072] br0: port 6(ath1) entered forwarding state 
 +[   51.897830] br0: port 6(ath1) entered forwarding state 
 +[   51.902792] 8021q: adding VLAN 0 to HW filter on device ath1 
 +[   51.913854] wlan: [0: E:NSS] [nss-wifili]: Could not set astenty active for hw_idx = 2860 
 +qcawifi qcawificfg80211: enable radio wifi0 
 +[   52.194862] wlan (5694): drop_caches:
 +grep: /tmp/openvpn/client/data/openvpn_client.stat: No such file or directory 
 +[   53.116433] ECM exit 
 +[   53.238117] __mc_netlink_receive: Disable bridge snooping! 
 +[   53.310827] __mc_netlink_receive: Enable bridge snooping! 
 +[   53.322563] ECM exit complete 
 +time zone index is : 2 
 +chgrp: unknown group www-data 
 +[FW UPGRADE][2020-06-18 11:55:00]:[Daily Check FW]count time:0
  
 +[   53.740509] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null)
 +[wlan]===time:Thu Jun 18 11:55:01 UTC 2020   command:wlan stainf[   54.315459] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter
 +[   54.321942] wlan: [6373: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 19
 +[   54.325273] wlan: [6373: I:ANY] 
 +[   54.332859] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=58
 +[   54.335984] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=106
 +[   54.344085] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=122
 +[   54.352794] wlan: [6373: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 19
 +[   54.360585] wlan: [6373: I:ANY] 
 +[   54.368455] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=58
 +[   54.371526] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=106
 +[   54.379686] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=122
 +[   54.387894] wlan: [4714: I:ANY] ol_acfg_handle_wifi_ioctl: req->cmd=74 not valid for radio interface, it's for VAP
 +o============== 
 +[   54.427617] wlan: [6398: I:ANY] set TXBF_SND_PERIOD: value 100 wmi_status 0
 +[   54.433047] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
 +[   54.433398] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
 +[   54.458001] wlan: [0: I:ANY]  Disconnect_timeout value entered:10 
 +[   54.459538] wlan: [0: I:ANY]  reconfiguration_timeout value entered:60 
 +[   54.562810] wlan_vap_create : enter. devhandle=0x32780880, opmode=IEEE80211_M_HOSTAP, flags=0x1
 +[   54.562862] wlan: [6479: I:ANY] ol_ath_vap_create: vdev id 1 
 +[   54.570431] wlan: [6479: I:ANY] nss-wifi:#0 VAP# vap ffffffc035f48000  nss_if 33 
 +[   54.576388] wlan: [6479: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 1 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo:
 +[   54.583855] wlan: [6479: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x1a
 +[   54.606193] wlan: [6479: I:ANY] dp_lag_pdev_set_ap_vdev pdev(ffffffc036b2e188) ap_vdev ffffffc029b60400 
 +[   54.613343] wlan: [6479: I:ANY] nss-wifi:#0 VAP# vdev ffffffc0295fe000 vap ffffffc035f48000 osif ffffffc0296e3880 nss_if 33 
 +[   54.622769] wlan: [6479: I:ANY] update nss wifiol ctx in osdev
 +[   54.633965] wlan: [6479: I:ANY] NSS wifi offload VAP create IF 33 nss_id -1 
 +[   54.639587] wlan: [6479: I:ANY] ****NSS radio_if 30****
 +[   54.646834] wlan: [0: I:ANY] VDEV configuration success: 0
 +[   54.651756] wlan: [6479: I:ANY] vap create ffffffc0296e3880 : if_num 33 
 +[   54.657430] wlan_vap_create : exit. devhandle=0x32780880, vap=0x35f48000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
 +[   54.657905] wlan: [0: I:ANY] Get MPSTA: vdev is NULL
 +[   54.673989] wlan: [6479: I:ANY] sa_api_init: Smart Antenna is not supported 
 +[   54.679211] wlan: [6479: I:ANY] sa_api_init: Smart Antenna is not supported 
 +[   54.686231] wlan: [6479: I:ANY] TX Checksum Bit: 1| SG Bit: 1| TSO Bit: 1 | LRO Bit: 0
 +[   54.693242] wlan: [6479: I:ANY] WLAN-NSS: VAP NSS ops initialized 
 +[   54.701024] wlan: [6479: I:ANY] ol_ath_update_phymode_caps: Error Mode 0 not 2G or 5G
 +[   54.707731] wlan: [6479: I:ANY] VAP device ath0 created osifp: (ffffffc0296e3880) os_if: (ffffffc035f48000)
 +[   54.715056] wlan: [6479: I:ANY] 3VAP device ath0 created!
 +[   54.738698] wlan: [6485: I:ANY] EXT NSS Supported
 +[   54.780604] wlan: [6511: I:ANY] setting hifi mode 5
 +[   54.783987] WARNING: Fragmentation with HT mode NOT ALLOWED!!
 +[   54.798543] wlan: [6524: I:ANY] Setting Max Stations:256
 +[   54.801798] wlan: [6526: I:ANY] DES SSID SET=NETGEAR22 
 +[   54.810825] wlan: [6530: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7
 +[   54.812791] wlan: [6531: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7
 +[   54.823826] wlan: [6533: I:ANY]  HE SU BFER already set with this value =1 
 +[   54.833050] wlan: [6534: I:ANY]  HE SU BFEE already set with this value =0 
 +[   54.839769] wlan: [6535: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7
 +[   54.845404] wlan: [6535: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7
 +[   54.859132] wlan: [6537: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 0 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo:
 +[   54.867340] wlan: [6537: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x12
 +[   54.891075] wlan: [6538: I:ANY] HE MU BFEE only supported in STA mode 
 +[   54.898461] wlan: [6539: I:ANY]  HE DL MU OFDMA already set with this value =1 
 +[   54.905484] device ath0 entered promiscuous mode
 +[   54.913866] wlan: [0: E:NSS] [nss-wifili]: Could not set astenty active for hw_idx = 2756
 +[   55.062442]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 
 +[   55.102586]  DEVICE IS DOWN ifname=ath0
 +[   55.102623]  DEVICE IS DOWN ifname=ath0
 +[   55.135933] wlan: [1703: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4 
 +[   55.135960] wlan: [1703: I:ANY] macaddr bc:a5:11:a7:ae:f8
 +[   55.162436] wlan: [1703: I:ANY] osif_vap_init: 7701: chan: 0xffffffc032781c10
 +[   55.162461] wlan: [1703: I:ANY] 
 +[   55.168621] wlan: [0: I:ANY] OL vap start id: 1 +
 +[   55.171863] wlan: [0: I:ANY] OL vap_start -
 +[   55.483566] wlan: [0: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7
 +[   55.483631] wlan: [0: I:ANY] Setting Rx Decap type to 2 (Ethernet)
 +[   55.493166] wlan: [0: I:ANY] Setting Tx Encap type to 2 (Ethernet)
 +[   55.499248] wlan: [0: E:FILS discovery] target_if_fd_reconfig: 157: FILS is not enabled
 +[   55.505396] wlan: [0: I:ANY] sa_api_init: Smart Antenna is not supported 
 +[   55.532445] wlan: [1703: I:ANY] Mgmt Rate:6000(kbps) | Rate Code:0x10000003
 +[   55.532845] br0: port 7(ath0) entered forwarding state
 +[   55.538203] br0: port 7(ath0) entered forwarding state
 +[   55.543429] 8021q: adding VLAN 0 to HW filter on device ath0
 +[   55.633151] wlan: [6616: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900 
 +[wlan]=========time:Thu Jun 18 11:55:03 UTC 2020 wlan up end==================
 +[   56.367655] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
 +[   56.762734] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null)
 +[   56.773592] __mc_netlink_receive: Disable bridge snooping!
 +[   56.796733] __mc_netlink_receive: Enable bridge snooping!
 +[   59.228099] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
 +Init wifison script to boot lbd
 +/sbin/wifison.sh: line 2998: logd: not found
 +uci: Entry not found
 +uci: Entry not found
 +uci: Entry not found
 +uci: Entry not found
 +uci: Entry not found
 +uci: Entry not found
 +uci: Entry not found
 +Save Data Success!, Parentid: 7191, parent process: (wifison.sh),presentid: 7409,present: (config)
 + 
 +[   60.208837] wlan: [7433: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900 
 +lbd: starting daemon
 +/etc/rc.common: line 1: __hyd_cfg_nl_append: not found
 +/etc/rc.common: line 1: __hyd_cfg_add_str: not found
 +/etc/rc.common: line 1: __hyd_cfg_add_str: not found
 +[   60.415738] wlan: [7461: I:ANY] [ath1]Band steering events being sent to PID:7461
 +[   60.415777] wlan: [7461: I:ANY] [ath0]Band steering events being sent to PID:7461
 +2048+0 records in
 +2048+0 records out
 +1048576 bytes (1.0MB) copied, 0.119904 seconds, 8.3MB/s
 +ca.crt
 +cert.info
 +client.crt
 +client.key
 +dh1024.pem
 +server.crt
 +server.key
 +/etc/rc.common: /etc/rc.d/S62funjsq: line 13: syntax error: unexpected "}"
 +Starting Firewall...
 +[   60.803137] xt_CT: netfilter: NOTRACK target is deprecated, use CT instead or upgrade iptables
 +Done!
 +time zone index is : 2
 +POT is Running...
 +[   62.978514] __mc_netlink_receive: Enable bridge snooping!
 +cat: can't open '/var/run/bond-mode': No such file or directory
 +cat: can't open '/var/run/bond-mode_wan': No such file or directory
 +[   64.060518] __mc_netlink_receive: Enable bridge snooping!
 +[   65.507443] wlan: [0: I:ANY] ieee80211_derive_chan : Overriding HE40 channel with HE20 channel
 +[   65.507502] wlan: [0: I:ANY] OL vap start id: 0 +
 +[   65.514967] wlan: [0: I:ANY] OL vap_start -
 +[   65.519726] wlan: [0: I:ANY] Mgmt Rate:1000(kbps) | Rate Code:0x10000103
 +[   65.610861] wlan: [0: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3
 +[   65.610929] wlan: [0: I:ANY] Setting Rx Decap type to 2 (Ethernet)
 +[   65.620452] wlan: [0: I:ANY] Setting Tx Encap type to 2 (Ethernet)
 +[   65.626549] wlan: [0: E:FILS discovery] target_if_fd_reconfig: 157: FILS is not enabled
 +[   65.632695] wlan: [0: I:ANY] sa_api_init: Smart Antenna is not supported 
 +traffic_meter start : .
 +$Shutting down igmpproxy: 
 +[   67.409100] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 8412
 +[   67.436399] UBIFS (ubi0:6): recovery needed
 +[   67.616192] UBIFS (ubi0:6): recovery completed
 +[   67.616261] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "vol_armor"
 +[   67.619526] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
 +[   67.627242] UBIFS (ubi0:6): FS size: 59551744 bytes (56 MiB, 469 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs)
 +[   67.637159] UBIFS (ubi0:6): reserved for root: 2812775 bytes (2746 KiB)
 +[   67.647438] UBIFS (ubi0:6): media format: w4/r0 (latest is w4/r0), UUID A31186D7-8C65-45A8-8947-23D401BBA23B, small LPT model
 +chown: unknown user/group root:root
 +sed: /opt/bitdefender/etc/patch.server: No such file or directory
 +Changed config file to use production server
 +chown: unknown user/group root:root
 +Save Data Success!, Parentid: 8357, parent process: (S94armor_init),presentid: 8422,present: (config)
 + 
 +[   68.009966] guster accel_cb registered; mark shift 20
 +Save Data reject(no change)!, Parentid: 8431, parent process: (S95done),presentid: 8470,present: (config)
 + 
 +check mouted USB partions...
 +****************Start of ping-netgear********************
 +DUT_boot_up_done!!!!!!!!!!
  
-/*** if info available: uncomment and fill in + SSDK Init OK! 
-==== Flash Layout ==== +operation done.
-<WRAP BOX> +
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).//+
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. 
-</WRAP> 
-***/ 
  
 + SSDK Init OK!
 +operation done.
  
-==== Photos ==== 
-/* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ 
-/* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ 
-/* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}}                                  */ 
-/* Thanks, your wiki administration - Oct. 2015 */ 
  
-**Insert photo of front of the casing**+ SSDK Init OK! 
 +operation done.
  
-**Insert photo of back of the casing** 
  
-**Insert photo of backside label**+ SSDK Init OK! 
 +operation done.
  
-**Insert photo of PCB** 
  
-==== Opening the case ====+ SSDK Init OK! 
 +operation done.
  
-<WRAP BOX> 
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// 
-</WRAP> 
  
-==== Serial ==== + SSDK Init OK! 
--> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.+operation done.
  
-How to connect to the Serial Port of this specific device:\\ 
-**Insert photo of PCB with markings for serial port** 
  
-<WRAP BOX> + SSDK Init OK! 
-FIXME //Replace EXAMPLE by real values.// +operation done.
-</WRAP>+
  
-^ Serial connection parameters\\ for Netgear RAX120 (Nighthawk AX12) @@Version@@ | EXAMPLE 115200, 8N1 | 
  
-==== JTAG ==== + SSDK Init OK! 
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.+operation done.
  
-How to connect to the JTAG Port of this specific device:\\ 
-**Insert photo of PCB with markings for JTAG port** 
  
-===== Bootlogs ===== + SSDK Init OK! 
-==== OEM bootlog ====+operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 + 
 + SSDK Init OK! 
 +operation done. 
 + 
 +control-firmware will be Running when Internet status is UP !!! 
 +Thermal Init Set ALL wifi 0 
 +Thermal Init Set ALL wifi 0 
 +ln: /dev/caldata: File exists 
 +/etc/rc.common: line 153: /etc/init.d/kcode: not found 
 +cat: can't open '/tmp/debug_store_locate': No such file or directory 
 +cat: can't open '/tmp/wanlan_capture': No such file or directory 
 +2+0 records in 
 +2+0 records out 
 +262144 bytes (256.0KB) copied, 0.062853 seconds, 4.0MB/s 
 +4096+0 records in 
 +4096+0 records out 
 +2097152 bytes (2.0MB) copied, 0.653297 seconds, 3.1MB/s 
 +tar: Skipping to next header 
 +[   69.567433] XHTTP netlink: remove OK. 
 +[   69.644426] XHTTP netlink: create netlink OK. 
 +tar: Child returned status 1 
 +tar: Error is not recoverable: exiting now 
 +Save Data Success!, Parentid: 8773, parent process: (S99aws),presentid: 8897,present: (config) 
 +  
 +killall: aws-iot: no process killed 
 +rm: can't remove '/var/run/aws_iot.pid': No such file or directory 
 +Save Data reject(no change)!, Parentid: 8773, parent process: (S99aws),presentid: 8965,present: (config) 
 +  
 +Save Data reject(no change)!, Parentid: 1, parent process: (procd),presentid: 8970,present: (aws-iot) 
 +  
 +Save Data reject(no change)!, Parentid: 8958, parent process: (detectSATA),presentid: 9017,present: (config) 
 +  
 +bdbrokerd is up, call ash start 
 +Save Data Success!, Parentid: 1, parent process: (procd),presentid: 8980,present: (icqm) 
 +  
 +Save Data reject(no change)!, Parentid: 8958, parent process: (detectSATA),presentid: 9130,present: (config) 
 +  
 +[   71.585377] wlan: [9377: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode 23 NSS 4 SGI =0  ratekbps=573500  
 +[   71.588161] wlan: [9377: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode 30 NSS 8 SGI =0  ratekbps=4803900  
 +[   71.596697] wlan: [9382: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode 23 NSS 4 SGI =0  ratekbps=573500  
 +[   71.605617] wlan: [9382: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  
 +[   71.624570] wlan: [9391: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 23 NSS = 4 SGI =0  ratekbps=573500  
 +[   71.624922] wlan: [9391: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  
 +########### [ Thu, 18 Jun 2020 11:55:18 +0000 ] ############# 
 +[[   71.647738] wlan: [9402: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000 
 +[   71.649415] wlan: [9402: I:ANY]  
 +VAP: ath1] 
 +########### [ Thu, 18 Jun 2020 11:55:19 +0000 ] ############# 
 +[VAP: ath0] 
 +[   72.678737] wlan: [9464: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc035f48000 
 +[   72.678774] wlan: [9464: I:ANY]  
 +[   75.570029] wlan: [9610: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 23 NSS = 4 SGI =0  ratekbps=573500  
 +[   75.570270] wlan: [9610: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0  ratekbps=4803900  
 +[   75.642475] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000 
 +[   75.642511] wlan: [0: I:ANY]  
 +[   75.651808] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc035f48000 
 +[   75.654692] wlan: [0: I:ANY]  
 + 
 +</nowiki> 
 +</WRAP>\\ 
 + 
 + 
 +==== OEM console environment ==== 
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +BusyBox v1.24.1 (2020-06-18 18:56:23 CST) built-in shell (ash) 
 +Enter 'help' for a list of built-in commands. 
 + 
 +     MM           NM                    MMMMMMM          M       M 
 +   $MMMMM        MMMMM                MMMMMMMMMMM      MMM     MMM 
 +  MMMMMMMM     MM MMMMM.              MMMMM:MMMMMM:   MMMM   MMMMM 
 +MMMM= MMMMMM  MMM   MMMM       MMMMM   MMMM  MMMMMM   MMMM  MMMMM' 
 +MMMM=  MMMMM MMMM    MM       MMMMM    MMMM    MMMM   MMMMNMMMMM 
 +MMMM=   MMMM  MMMMM          MMMMM     MMMM    MMMM   MMMMMMMM 
 +MMMM=   MMMM   MMMMMM       MMMMM      MMMM    MMMM   MMMMMMMMM 
 +MMMM=   MMMM     MMMMM,    NMMMMMMMM   MMMM    MMMM   MMMMMMMMMMM 
 +MMMM=   MMMM      MMMMMM   MMMMMMMM    MMMM    MMMM   MMMM  MMMMMM 
 +MMMM=   MMMM   MM    MMMM    MMMM      MMMM    MMMM   MMMM    MMMM 
 +MMMM$ ,MMMMM  MMMMM  MMMM    MMM       MMMM   MMMMM   MMMM    MMMM 
 +  MMMMMMM:      MMMMMMM             MMMMMMMMMMMM  MMMMMMM MMMMMMM 
 +    MMMMMM       MMMMN               MMMMMMMMM      MMMM    MMMM 
 +     MMMM          M                    MMMMMMM        M       M 
 +       M 
 + --------------------------------------------------------------- 
 +   For those about to rock... (Chaos Calmer, RAX120-V1.0.1.128+r49254) 
 + --------------------------------------------------------------- 
 + 
 +root@RAX120:/# help 
 +Built-in commands: 
 +------------------ 
 + . : [ [[ alias bg break cd chdir command continue echo eval exec 
 + exit export false fg getopts hash help history jobs kill let 
 + local printf pwd read readonly return set shift source test times 
 + trap true type ulimit umask unalias unset wait 
 + 
 +root@RAX120:/# The abbreviation of English is Eng! 
 + 
 +root@RAX120:/# cat /etc/openwrt_version 
 +15.05.1 
 + 
 + 
 +root@RAX120:/# cat /etc/openwrt_release 
 +DISTRIB_ID='OpenWrt' 
 +DISTRIB_RELEASE='Chaos Calmer' 
 +DISTRIB_REVISION='RAX120-V1.0.1.128+r49254' 
 +DISTRIB_CODENAME='chaos_calmer' 
 +DISTRIB_TARGET='ipq/ipq807x_64' 
 +DISTRIB_DESCRIPTION='OpenWrt Chaos Calmer 15.05.1' 
 +DISTRIB_TAINTS='no-all' 
 + 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki> 
 +[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
 +[    0.000000] Linux version 5.15.88 (user@user-virtual-machine) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.2.0 r21804+24-0a15bb6510) 12.2.0, GNU ld (GNU Binutils) 2.39) #0 SMP Tue Jan 17 06:26:02 2023 
 +[    0.000000] Machine model: Netgear RAX120v2 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff] 
 +[    0.000000]   DMA32    empty 
 +[    0.000000]   Normal   empty 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff] 
 +[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff] 
 +[    0.000000]   node   0: [mem 0x000000004a400000-0x000000004a5fffff] 
 +[    0.000000]   node   0: [mem 0x000000004a600000-0x000000004aafffff] 
 +[    0.000000]   node   0: [mem 0x000000004ab00000-0x00000000510fffff] 
 +[    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] 
 +[    0.000000] psci: probing for conduit method from DT. 
 +[    0.000000] psci: PSCIv1.0 detected in firmware. 
 +[    0.000000] psci: Using standard PSCI v0.2 function IDs 
 +[    0.000000] psci: MIGRATE_INFO_TYPE not supported. 
 +[    0.000000] psci: SMC Calling Convention v1.0 
 +[    0.000000] psci: OSI mode supported. 
 +[    0.000000] percpu: Embedded 17 pages/cpu s30360 r8192 d31080 u69632 
 +[    0.000000] pcpu-alloc: s30360 r8192 d31080 u69632 alloc=17*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 +[    0.000000] Detected VIPT I-cache on CPU0 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048 
 +[    0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=/dev/ubiblock0_1 
 +[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 893416K/1048576K available (7424K kernel code, 848K rwdata, 2036K rodata, 1216K init, 273K bss, 155160K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 
 +[    0.000000] Root IRQ handler: gic_handle_irq 
 +[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] 
 +[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). 
 +[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns 
 +[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns 
 +[    0.000127] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 
 +[    0.000143] pid_max: default: 32768 minimum: 301 
 +[    0.000302] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.000319] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.001935] rcu: Hierarchical SRCU implementation. 
 +[    0.002109] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build 
 +[    0.002701] smp: Bringing up secondary CPUs ... 
 +[    0.003277] Detected VIPT I-cache on CPU1 
 +[    0.003344] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] 
 +[    0.003952] Detected VIPT I-cache on CPU2 
 +[    0.003992] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] 
 +[    0.004553] Detected VIPT I-cache on CPU3 
 +[    0.004589] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] 
 +[    0.004654] smp: Brought up 1 node, 4 CPUs 
 +[    0.004681] SMP: Total of 4 processors activated. 
 +[    0.004689] CPU features: detected: 32-bit EL0 Support 
 +[    0.004696] CPU features: detected: CRC32 instructions 
 +[    0.004750] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 
 +[    0.004760] CPU: All CPU(s) started at EL1 
 +[    0.004782] alternatives: patching kernel code 
 +[    0.013118] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.013155] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 
 +[    0.013304] pinctrl core: initialized pinctrl subsystem 
 +[    0.014310] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
 +[    0.014761] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations 
 +[    0.014805] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
 +[    0.014843] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
 +[    0.015183] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.016696] cpuidle: using governor menu 
 +[    0.016912] ASID allocator initialised with 65536 entries 
 +[    0.018118] OF: /opp-table: could not get #nvmem-cell-cells for /soc/efuse@a4000/speedbin@125 
 +[    0.072361] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
 +[    0.079892] SCSI subsystem initialized 
 +[    0.080119] usbcore: registered new interface driver usbfs 
 +[    0.080167] usbcore: registered new interface driver hub 
 +[    0.080203] usbcore: registered new device driver usb 
 +[    0.080437] CPUidle PSCI: failed to enable OSI mode: -95 
 +[    0.080787] qcom_scm: convention: smc arm 64 
 +[    0.081986] clocksource: Switched to clocksource arch_sys_counter 
 +[    0.082638] NET: Registered PF_INET protocol family 
 +[    0.082775] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) 
 +[    0.083605] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) 
 +[    0.083637] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.083653] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) 
 +[    0.083740] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) 
 +[    0.083890] TCP: Hash tables configured (established 8192 bind 8192) 
 +[    0.083988] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) 
 +[    0.084029] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) 
 +[    0.084199] NET: Registered PF_UNIX/PF_LOCAL protocol family 
 +[    0.084232] PCI: CLS 0 bytes, default 64 
 +[    0.085311] workingset: timestamp_bits=46 max_order=18 bucket_order=0 
 +[    0.088960] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.088975] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.090880] qcom-qmp-phy 58000.phy: supply vdda-phy not found, using dummy regulator 
 +[    0.091027] qcom-qmp-phy 58000.phy: supply vdda-pll not found, using dummy regulator 
 +[    0.092089] qcom-qmp-phy 58000.phy: Registered Qcom-QMP phy 
 +[    0.092357] qcom-qmp-phy 78000.phy: supply vdda-phy not found, using dummy regulator 
 +[    0.092488] qcom-qmp-phy 78000.phy: supply vdda-pll not found, using dummy regulator 
 +[    0.093376] qcom-qmp-phy 78000.phy: Registered Qcom-QMP phy 
 +[    0.094260] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator 
 +[    0.094398] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator 
 +[    0.094548] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy 
 +[    0.094724] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator 
 +[    0.094836] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator 
 +[    0.094994] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy 
 +[    0.099190] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt 
 +[    0.099215] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt 
 +[    0.103144] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +[    0.103713] msm_serial 78b3000.serial: msm_serial: detected port #0 
 +[    0.103758] msm_serial 78b3000.serial: uartclk = 3686400 
 +[    0.103805] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM 
 +[    0.103839] msm_serial: console setup on port #0 
 +[    0.804697] printk: console [ttyMSM0] enabled 
 +[    0.809826] msm_serial: driver initialized 
 +[    0.817616] loop: module loaded 
 +[    0.818923] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac 
 +[    0.820652] nand: Winbond W29N04GZ 
 +[    0.827270] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 
 +[    0.830764] 26 fixed-partitions partitions found on MTD device qcom_nand.0 
 +[    0.838085] Creating 26 MTD partitions on "qcom_nand.0": 
 +[    0.844883] 0x000000000000-0x000000100000 : "0:sbl1" 
 +[    0.851607] 0x000000100000-0x000000200000 : "0:mibib" 
 +[    0.856492] 0x000000200000-0x000000280000 : "0:bootconfig" 
 +[    0.861004] 0x000000280000-0x000000300000 : "0:bootconfig_1" 
 +[    0.866526] 0x000000300000-0x000000600000 : "0:qsee" 
 +[    0.874354] 0x000000600000-0x000000900000 : "0:qsee_1" 
 +[    0.879238] 0x000000900000-0x000000980000 : "0:devcfg" 
 +[    0.882146] 0x000000980000-0x000000a00000 : "0:devcfg_1" 
 +[    0.887258] 0x000000a00000-0x000000a80000 : "0:apdp" 
 +[    0.892713] 0x000000a80000-0x000000b00000 : "0:apdp_1" 
 +[    0.897653] 0x000000b00000-0x000000b80000 : "0:rpm" 
 +[    0.902608] 0x000000b80000-0x000000c00000 : "0:rpm_1" 
 +[    0.907386] 0x000000c00000-0x000000c80000 : "0:cdt" 
 +[    0.912607] 0x000000c80000-0x000000d00000 : "0:cdt_1" 
 +[    0.917271] 0x000000d00000-0x000000d80000 : "0:appsblenv" 
 +[    0.922505] 0x000000d80000-0x000000e80000 : "0:appsbl" 
 +[    0.928287] 0x000000e80000-0x000000f80000 : "0:appsbl_1" 
 +[    0.933362] 0x000000f80000-0x000001000000 : "0:art" 
 +[    0.938384] 0x000001000000-0x000001080000 : "0:art.bak" 
 +[    0.943033] 0x000001080000-0x000001180000 : "config" 
 +[    0.948607] 0x000001180000-0x000001280000 : "boarddata1" 
 +[    0.953835] 0x000001280000-0x000001380000 : "boarddata2" 
 +[    0.959091] 0x000001380000-0x000001480000 : "pot" 
 +[    0.964451] 0x000001480000-0x000001980000 : "dnidata" 
 +[    0.972357] 0x000001980000-0x000003680000 : "kernel" 
 +[    0.997262] 0x00000e880000-0x000020000000 : "rootfs" 
 +[    1.228555] mtd: setting mtd25 (rootfs) as root device 
 +[    1.228852] mtdsplit: no squashfs found in "rootfs" 
 +[    1.240511] spmi spmi-0: PMIC arbiter version v2 (0x20010000) 
 +[    1.243568] s1: supplied by regulator-dummy 
 +[    1.245412] s2: supplied by regulator-dummy 
 +[    1.249401] vdd_s3: supplied by regulator-dummy 
 +[    1.253705] vdd_s4: supplied by regulator-dummy 
 +[    1.258228] s5: supplied by regulator-dummy 
 +[    1.262622] l1: supplied by regulator-dummy 
 +[    1.266756] l2: supplied by regulator-dummy 
 +[    1.270913] l3: supplied by regulator-dummy 
 +[    1.275120] l4: supplied by regulator-dummy 
 +[    1.279255] l5: supplied by regulator-dummy 
 +[    1.283424] l6: supplied by regulator-dummy 
 +[    1.287608] l7: supplied by regulator-dummy 
 +[    1.291753] l8: supplied by regulator-dummy 
 +[    1.295945] l9: supplied by regulator-dummy 
 +[    1.300208] l11: supplied by regulator-dummy 
 +[    1.304277] l12: supplied by regulator-dummy 
 +[    1.308771] l13: supplied by regulator-dummy 
 +[    1.329036] i2c_dev: i2c /dev entries driver 
 +[    1.334149] sdhci: Secure Digital Host Controller Interface driver 
 +[    1.334193] sdhci: Copyright(c) Pierre Ossman 
 +[    1.339225] sdhci-pltfm: SDHCI platform and OF driver helper 
 +[    1.347096] remoteproc remoteproc0: releasing cd00000.q6v5_wcss 
 +[    1.351558] NET: Registered PF_INET6 protocol family 
 +[    1.355950] Segment Routing with IPv6 
 +[    1.360271] In-situ OAM (IOAM) with IPv6 
 +[    1.363899] NET: Registered PF_PACKET protocol family 
 +[    1.367825] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.388557] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
 +[    1.388859] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 
 +[    1.394869] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 
 +[    1.401282] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 
 +[    1.408955] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable 
 +[    1.416464] cpr3_mem_acc_init: apc: not using memory accelerator regulator 
 +[    1.425596] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV 
 +[    1.432544] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 808000 uV 
 +[    1.442527] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 864000 uV 
 +[    1.452335] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 960000 uV 
 +[    1.462194] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 718, quot_offset[ 7]=   0 
 +[    1.471948] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 919, quot_offset[ 7]= 200 
 +[    1.482807] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1016, quot_offset[ 7]=  95 
 +[    1.493743] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1195, quot_offset[ 7]= 175 
 +[    1.504817] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop 
 +[    1.507430] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz 
 +[    1.523364] remoteproc remoteproc0: cd00000.q6v5_wcss is available 
 +[    1.533504] ubi0: attaching mtd25 
 +[    2.112002] random: crng init done 
 +[    2.803768] ubi0: scanning is finished 
 +[    2.811224] ubi0: attached mtd25 (name "rootfs", size 279 MiB) 
 +[    2.811267] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    2.815977] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    2.822823] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    2.829676] ubi0: good PEBs: 2236, bad PEBs: 0, corrupted PEBs: 0 
 +[    2.836449] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 
 +[    2.842704] ubi0: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 31865999 
 +[    2.849819] ubi0: available PEBs: 0, total reserved PEBs: 2236, PEBs reserved for bad PEB handling: 80 
 +[    2.858771] ubi0: background thread "ubi_bgt0d" started, PID 520 
 +[    2.859428] block ubiblock0_1: created from ubi0:1(rootfs) 
 +[    2.877321] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
 +[    2.877727] Freeing unused kernel memory: 1216K 
 +[    2.932054] Run /sbin/init as init process 
 +[    2.932075]   with arguments: 
 +[    2.932078]     /sbin/init 
 +[    2.932081]   with environment: 
 +[    2.932083]     HOME=/ 
 +[    2.932086]     TERM=linux 
 +[    3.058545] init: Console is alive 
 +[    3.058670] init: - watchdog - 
 +[    3.430917] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    3.589684] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1 
 +[    3.589799] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist! 
 +[    3.596201] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus 
 +[    3.602151] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000 
 +[    3.609438] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000 
 +[    3.616910] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0 
 +[    3.623586] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xff 
 +[    3.629053] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xd 
 +[    3.635011] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist! 
 +[    3.640786] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC c8:9e:43:82:f0:c0 
 +[    3.646364] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC c8:9e:43:82:f0:c1 
 +[    3.652958] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC c8:9e:43:82:f0:c2 
 +[    3.659557] ssdk_plat_init[1692]:INFO:ssdk_plat_init start 
 +[    3.783168] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully! 
 +[    3.784280] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded! 
 +[    3.794341] aquantia_phy_api_ops_init[2241]:INFO:qca probe aquantia phy driver succeeded! 
 +[    3.797692] regi_init[3953]:INFO:Initializing HPPE!! 
 +[    4.041990] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully! 
 +[    4.045588] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing 
 +[    5.092030] ssdk_switch_register[2017]:INFO:Chip version 0x1500 
 +[    5.092065] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist 
 +[    5.096753] ssdk_switch_register[2043]:INFO:polling is selected 
 +[    5.105100] regi_init[3957]:INFO:Initializing HPPE Done!! 
 +[    5.110825] ssdk_genl_init[211]:INFO:ssdk genl family register success. 
 +[    5.116298] regi_init[4020]:INFO:qca-ssdk module init succeeded! 
 +[    5.124711] EDMA ver 1 hw init 
 +[    5.129171] EDMA HW Reset completed succesfully 
 +[    5.131846] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) 
 +[    5.136266] RxDesc:1 (15-15) RxFill:1 (7-7) 
 +[    5.142173] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL) 
 +[    5.146251] nss-dp 3a001000.dp1 lan4: Registered netdev lan4(qcom-id:1) 
 +[    5.155678] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) 
 +[    5.162341] nss-dp 3a001200.dp2 lan3: Registered netdev lan3(qcom-id:2) 
 +[    5.171766] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) 
 +[    5.178507] nss-dp 3a001400.dp3 lan2: Registered netdev lan2(qcom-id:3) 
 +[    5.187822] GMAC4(ffffff8002f038c0) Invalid MAC@ - using a2:57:40:75:10:c4 
 +[    5.194207] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) 
 +[    5.201522] nss-dp 3a001600.dp4 lan1: Registered netdev lan1(qcom-id:4) 
 +[    5.210803] GMAC5(ffffff8002f048c0) Invalid MAC@ - using 76:2c:6c:78:fc:f0 
 +[    5.217232] Generic PHY 90000.mdio-1:04: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:04, irq=POLL) 
 +[    5.224535] nss-dp 3a001800.dp5 wan: Registered netdev wan(qcom-id:5) 
 +[    5.233811] GMAC6(ffffff8002f058c0) Invalid MAC@ - using 82:9a:84:e0:8b:be 
 +[    5.240328] Generic Clause 45 PHY 90000.mdio-1:07: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:07, irq=POLL) 
 +[    5.247353] nss-dp 3a001a00.dp6 lan5: Registered netdev lan5(qcom-id:6) 
 +[    5.257280] ********************************************************** 
 +[    5.263772] * NSS Data Plane driver 
 +[    5.270353] ********************************************************** 
 +[    5.285435] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
 +[    5.285482] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 
 +[    5.289940] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010 
 +[    5.297445] xhci-hcd xhci-hcd.1.auto: irq 91, io mem 0x08a00000 
 +[    5.306842] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
 +[    5.312653] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 
 +[    5.318208] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed 
 +[    5.326151] hub 1-0:1.0: USB hub found 
 +[    5.332416] hub 1-0:1.0: 1 port detected 
 +[    5.336305] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
 +[    5.340419] hub 2-0:1.0: USB hub found 
 +[    5.348261] hub 2-0:1.0: 1 port detected 
 +[    5.352119] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller 
 +[    5.355884] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 
 +[    5.361307] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010 
 +[    5.368774] xhci-hcd xhci-hcd.2.auto: irq 92, io mem 0x08c00000 
 +[    5.378197] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller 
 +[    5.384009] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 
 +[    5.389563] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed 
 +[    5.397501] hub 3-0:1.0: USB hub found 
 +[    5.403734] hub 3-0:1.0: 1 port detected 
 +[    5.407700] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
 +[    5.411763] hub 4-0:1.0: USB hub found 
 +[    5.419630] hub 4-0:1.0: 1 port detected 
 +[    5.424850] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    5.431850] init: - preinit - 
 +[    7.844917] UBIFS (ubi0:2): Mounting in unauthenticated mode 
 +[    7.845021] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 760 
 +[    7.927255] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" 
 +[    7.927303] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[    7.934101] UBIFS (ubi0:2): FS size: 259031040 bytes (247 MiB, 2040 LEBs), max 2053 LEBs, journal size 12951552 bytes (12 MiB, 102 LEBs) 
 +[    7.943997] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB) 
 +[    7.956307] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 73F1A91B-1765-4BE4-B4C6-1FE79C28A0C8, small LPT model 
 +[    7.963600] mount_root: overlay filesystem has not been fully initialized yet 
 +[    7.974433] mount_root: switching to ubifs overlay 
 +[    7.984410] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. 
 +[    8.116071] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[    8.151809] procd: - early - 
 +[    8.151901] procd: - watchdog - 
 +[    8.686888] procd: - watchdog - 
 +[    8.687141] procd: - ubus - 
 +[    8.743729] procd: - init - 
 +[    8.872866] urngd: v1.0.2 started. 
 +[    8.891105] kmodloader: loading kernel modules from /etc/modules.d/
 +[    8.920353] Loading modules backported from Linux version v6.1-rc8-0-g76dcd734eca2 
 +[    8.920392] Backport generated by backports.git v5.15.81-1-41-g02e352527db5 
 +[    8.931638] NET: Registered PF_QIPCRTR protocol family 
 +[    8.964549] PPP generic driver version 2.4.2 
 +[    8.965202] NET: Registered PF_PPPOX protocol family 
 +[    8.973115] ath11k c000000.wifi: ipq8074 hw2.0 
 +[    8.973148] ath11k c000000.wifi: FW memory mode: 0 
 +[    8.977317] remoteproc remoteproc0: powering up cd00000.q6v5_wcss 
 +[    8.993947] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 
 +[    9.970726] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up 
 +[    9.972994] ath11k c000000.wifi: qmi ignore invalid mem req type 3 
 +[    9.977732] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff 
 +[    9.983229] ath11k c000000.wifi: fw_version 0x250a04a5 fw_build_timestamp 2021-12-20 07:09 fw_build_id WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 
 +[    9.992924] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   12.128788] br-lan: port 1(lan1) entered blocking state 
 +[   12.128834] br-lan: port 1(lan1) entered disabled state 
 +[   12.133076] device lan1 entered promiscuous mode 
 +[   12.145957] br-lan: port 2(lan2) entered blocking state 
 +[   12.146000] br-lan: port 2(lan2) entered disabled state 
 +[   12.150188] device lan2 entered promiscuous mode 
 +[   12.158516] nss-dp 3a001200.dp2 lan3: PHY Link up speed: 1000 
 +[   12.160698] br-lan: port 3(lan3) entered blocking state 
 +[   12.165757] br-lan: port 3(lan3) entered disabled state 
 +[   12.170935] device lan3 entered promiscuous mode 
 +[   12.179349] br-lan: port 4(lan4) entered blocking state 
 +[   12.180816] br-lan: port 4(lan4) entered disabled state 
 +[   12.186009] device lan4 entered promiscuous mode 
 +[   12.194295] br-lan: port 5(lan5) entered blocking state 
 +[   12.195831] br-lan: port 5(lan5) entered disabled state 
 +[   12.200951] device lan5 entered promiscuous mode 
 +[   12.756975] br-lan: port 6(phy1-ap0) entered blocking state 
 +[   12.757022] br-lan: port 6(phy1-ap0) entered disabled state 
 +[   12.761551] device phy1-ap0 entered promiscuous mode 
 +[   12.767106] br-lan: port 6(phy1-ap0) entered blocking state 
 +[   12.772137] br-lan: port 6(phy1-ap0) entered forwarding state 
 +[   12.778364] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   12.809396] br-lan: port 7(phy2-ap0) entered blocking state 
 +[   12.809442] br-lan: port 7(phy2-ap0) entered disabled state 
 +[   12.814229] device phy2-ap0 entered promiscuous mode 
 +[   12.819600] br-lan: port 7(phy2-ap0) entered blocking state 
 +[   12.824600] br-lan: port 7(phy2-ap0) entered forwarding state 
 +[   12.895131] br-lan: port 8(phy0-ap0) entered blocking state 
 +[   12.895177] br-lan: port 8(phy0-ap0) entered disabled state 
 +[   12.899708] device phy0-ap0 entered promiscuous mode 
 +[   12.905283] br-lan: port 8(phy0-ap0) entered blocking state 
 +[   12.910291] br-lan: port 8(phy0-ap0) entered forwarding state 
 +[   13.132114] br-lan: port 3(lan3) entered blocking state 
 +[   13.132166] br-lan: port 3(lan3) entered forwarding state 
 +[   13.136478] br-lan: port 6(phy1-ap0) entered disabled state 
 +[   13.141944] br-lan: port 7(phy2-ap0) entered disabled state 
 +[   13.147330] br-lan: port 8(phy0-ap0) entered disabled state 
 +[   13.597949] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready 
 +[   13.598130] br-lan: port 8(phy0-ap0) entered blocking state 
 +[   13.603398] br-lan: port 8(phy0-ap0) entered forwarding state 
 +[   15.153680] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready 
 +[   15.153861] br-lan: port 6(phy1-ap0) entered blocking state 
 +[   15.159121] br-lan: port 6(phy1-ap0) entered forwarding state 
 +[   33.122035] l11: disabling 
 +[   74.771747] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready 
 +[   74.771970] br-lan: port 7(phy2-ap0) entered blocking state 
 +[   74.777183] br-lan: port 7(phy2-ap0) entered forwarding state 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 +===== Unbrick =====
 +==== tftp method ===
 +Below is the method to unbrick without TTL access (most of the instructions on the internet doesn't work for this device, including the ones on Netgear website). 
 +
 +Assume using a linux pc for unbrick, and tftp client is already installed:
 +  - Connect PC to router's lan with cable, set static ip as 192.168.1.10
 +  - Download the stock firmware to PC, save as 1.img in the working dir
 +  - Run in terminal:<code>
 +tftp 192.168.1.1
 +>binary
 +>put  1.img  (don't presss ENTER now, for this line)
 +</code>
 +  - Power off the device, hold the RESET button, power on device, keep RESET holding all the time
 +  - After holding for about 20~30s, the device's power LED enters into a fast blinking status(and if you ping 192.168.1.1 in another terminal you start to get response). Release the RESET button.
 +  - Press ENTER button in the tftp.
 +  - Wait for transfer to finish(there is no message indicating tftp is working during transfering, but use ifconfig you can see traffic going out at a few MB/s). After transfer is done, you will see success message from tftp.  
 +  - Wait for the device to auto reboot.
 +  - (Optional) Do a reset of the router in the normal way, after device already starts up.
 +This method doesn't require the device in an already bricked status. It's confirmed working on RAX120v2, it's also known to work on RAX70. 
 +
 +==== TTL + USB method (not suggested)====
 +In the case tftp doesn't work for you (e.g. no ethernet available for your PC), a TTL + USB method can be used for back/restore the mtd partitions of the device.
 +
 +Install the initramfs of the experimental fork of into an USB stick, perform a USB-boot with TTL. (see the steps on the ''experimental firmware'' section).
 +
 +Once running in the initramfs, backup/restore mtd partitions with below commands:
 +<code>
 +dd if=/dev/mtdblockXX  of=/tmp/mtdXX.bak     (for backup, restore XX with the partition num you want to backup)
 +dd of=/tmp/mtdXX.bak  if=/dev/mtdblockXX     (for restore)
 +</code>
 +
 +Usually what you need to backup/restore is the ''firmware'' parititon, you can find the partition num from ''/proc/mtd''.
 +
 +== Note ==
 +
 +The mtd partition table seen from the bootloader is not same as seen from official firmware or openwrt. So, this method is not really suggested, since mistakes can happen easily
 ===== Notes ===== ===== Notes =====
 +This website contains much information about this device: [[http://en.techinfodepot.shoutwiki.com/wiki/Netgear_RAX120_(Nighthawk_AX12)|link]]
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG unsupported}}+{{tag>ipq807x ipq8074 512flash 1024ram 6port GigabitEthernet 5GigabitEthernet 802.11bgn 802.11ax serial u-boot 4core ath11k cortexa53 4x4 8x8 txbf MU-MIMO wifi6}} 
  • Last modified: 2024/03/13 23:04
  • by ywang