Linksys MX4300

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.6.71 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28589-54463f1e2e) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon Jan 13 14:28:14 2025 [ 0.000000] OF: fdt: Input kernel commad line: init=/sbin/init rootfstype=squashfs ubi.mtd=22,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro [ 0.000000] OF: fdt: Replace kernel command line with bootargs-replace-1 [ 0.000000] OF: fdt: Kernel command line after replacement: init=/sbin/init rootfstype=squashfs ubi.mtd=22,4096 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro [ 0.000000] Machine model: Linksys MX4300 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000 [ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000 [ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000 [ 0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000 [ 0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000 [ 0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff] [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff] [ 0.000000] node 0: [mem 0x0000000051100000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 18 pages/cpu s36136 r8192 d29400 u73728 [ 0.000000] pcpu-alloc: s36136 r8192 d29400 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=22,4096 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000bd600000-0x00000000bd800000] (2MB) [ 0.000000] Memory: 1912624K/2097152K available (8576K kernel code, 920K rwdata, 2576K rodata, 1600K init, 295K bss, 184528K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000109] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000121] pid_max: default: 32768 minimum: 301 [ 0.005141] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.005158] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.009460] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.009689] rcu: Hierarchical SRCU implementation. [ 0.009693] rcu: Max phase no-delay instances is 1000. [ 0.010644] smp: Bringing up secondary CPUs ... [ 0.011321] Detected VIPT I-cache on CPU1 [ 0.011427] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.012106] Detected VIPT I-cache on CPU2 [ 0.012176] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.012834] Detected VIPT I-cache on CPU3 [ 0.012901] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012972] smp: Brought up 1 node, 4 CPUs [ 0.012980] SMP: Total of 4 processors activated. [ 0.012985] CPU features: detected: 32-bit EL0 Support [ 0.012990] CPU features: detected: CRC32 instructions [ 0.013053] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.013060] CPU: All CPU(s) started at EL1 [ 0.013063] alternatives: applying system-wide alternatives [ 0.024554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.024579] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.026315] pinctrl core: initialized pinctrl subsystem [ 0.028361] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.028978] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.029034] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.029086] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.029510] thermal_sys: Registered thermal governor 'step_wise' [ 0.029569] cpuidle: using governor menu [ 0.029807] ASID allocator initialised with 65536 entries [ 0.056303] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.058230] Modules: 29232 pages in range for non-PLT usage [ 0.058237] Modules: 520752 pages in range for PLT usage [ 0.061797] SCSI subsystem initialized [ 0.062006] usbcore: registered new interface driver usbfs [ 0.062041] usbcore: registered new interface driver hub [ 0.062091] usbcore: registered new device driver usb [ 0.062536] qcom_scm: convention: smc arm 64 [ 0.064322] clocksource: Switched to clocksource arch_sys_counter [ 0.068255] NET: Registered PF_INET protocol family [ 0.068444] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.072227] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.072260] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.072276] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.072437] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.072982] TCP: Hash tables configured (established 16384 bind 16384) [ 0.073537] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) [ 0.073751] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.073817] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.074431] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.074474] PCI: CLS 0 bytes, default 64 [ 0.076169] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.076950] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.076958] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.080819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.083265] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator [ 0.083448] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator [ 0.084736] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator [ 0.084868] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator [ 0.084924] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator [ 0.085137] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy [ 0.093474] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.097477] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 0.097532] msm_serial 78b3000.serial: uartclk = 3686400 [ 0.097884] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 20, base_baud = 230400) is a MSM [ 0.097920] msm_serial: console setup on port #0 [ 0.097961] printk: console [ttyMSM0] enabled [ 0.913008] msm_serial: driver initialized [ 0.922447] loop: module loaded [ 0.923877] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa3 [ 0.924439] nand: Micron MT29F8G08ABBCAH4 [ 0.930996] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224 [ 0.935317] 32 fixed-partitions partitions found on MTD device qcom_nand.0 [ 0.942735] Creating 32 MTD partitions on “qcom_nand.0”: [ 0.949424] 0x000000000000-0x000000100000 : “0:sbl1” [ 0.955988] 0x000000100000-0x000000200000 : “0:mibib” [ 0.960746] 0x000000200000-0x000000280000 : “0:bootconfig” [ 0.965598] 0x000000280000-0x000000300000 : “0:bootconfig1” [ 0.970853] 0x000000300000-0x000000600000 : “0:qsee” [ 0.977520] 0x000000600000-0x000000900000 : “0:qsee_1” [ 0.982496] 0x000000900000-0x000000980000 : “0:devcfg” [ 0.986621] 0x000000980000-0x000000a00000 : “0:devcfg_1” [ 0.991600] 0x000000a00000-0x000000a80000 : “0:apdp” [ 0.997129] 0x000000a80000-0x000000b00000 : “0:apdp_1” [ 1.002008] 0x000000b00000-0x000000b80000 : “0:rpm” [ 1.007028] 0x000000b80000-0x000000c00000 : “0:rpm_1” [ 1.011769] 0x000000c00000-0x000000c80000 : “0:cdt” [ 1.016992] 0x000000c80000-0x000000d00000 : “0:cdt_1” [ 1.021626] 0x000000d00000-0x000000d80000 : “0:appsblenv” [ 1.026919] 0x000000d80000-0x000000e80000 : “0:appsbl” [ 1.032418] 0x000000e80000-0x000000f80000 : “0:appsbl_1” [ 1.037475] 0x000000f80000-0x000001000000 : “0:art” [ 1.042747] 0x000001000000-0x000001100000 : “u_env” [ 1.047553] 0x000001100000-0x000001200000 : “s_env” [ 1.052381] 0x000001200000-0x000001240000 : “devinfo” [ 1.057051] 0x000001240000-0x00000c180000 : “kernel” [ 1.130755] 0x000001a40000-0x00000c180000 : “rootfs” [ 1.196866] mtd: setting mtd22 (rootfs) as root device [ 1.197361] mtdsplit: no squashfs found in “rootfs” [ 1.200913] 0x00000c180000-0x0000170c0000 : “alt_kernel” [ 1.274855] 0x00000c980000-0x0000170c0000 : “alt_rootfs” [ 1.340879] 0x0000170c0000-0x0000174c0000 : “sysdiag” [ 1.342990] 0x0000174c0000-0x000017540000 : “0:ethphyfw” [ 1.345674] 0x000017540000-0x00001ef00000 : “syscfg” [ 1.398560] 0x00001ef00000-0x00001f300000 : “secured_store” [ 1.400694] 0x00001f300000-0x000020c00000 : “0:wififw” [ 1.413321] 0x000020c00000-0x000036d80000 : “app2_data” [ 1.552484] 0x000036d80000-0x000040000000 : “app2” [ 1.621992] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 1.640983] i2c_dev: i2c /dev entries driver [ 1.648432] sdhci: Secure Digital Host Controller Interface driver [ 1.648475] sdhci: Copyright© Pierre Ossman [ 1.653511] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.659895] remoteproc remoteproc0: releasing cd00000.q6v5_wcss [ 1.666464] NET: Registered PF_INET6 protocol family [ 1.670334] Segment Routing with IPv6 [ 1.674596] In-situ OAM (IOAM) with IPv6 [ 1.678158] NET: Registered PF_PACKET protocol family [ 1.682130] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.687990] 8021q: 802.1Q VLAN Support v1.8 [ 1.728865] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.729244] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.735023] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 1.741591] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.749375] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.756803] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.765921] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV [ 1.772843] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV [ 1.782853] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 872000 uV [ 1.792659] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 960000 uV [ 1.802518] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 722, quot_offset[ 7]= 0 [ 1.812280] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 936, quot_offset[ 7]= 210 [ 1.823136] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1032, quot_offset[ 7]= 95 [ 1.834069] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1192, quot_offset[ 7]= 160 [ 1.845246] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.848034] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz [ 1.864856] remoteproc remoteproc0: cd00000.q6v5_wcss is available [ 1.873728] ubi0: attaching mtd22 [ 2.164324] random: crng init done [ 2.505338] ubi0: scanning is finished [ 2.511409] ubi0: attached mtd22 (name “rootfs”, size 167 MiB) [ 2.511446] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 2.516151] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 2.522996] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 2.529861] ubi0: good PEBs: 668, bad PEBs: 1, corrupted PEBs: 0 [ 2.536630] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.542877] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1736778494 [ 2.549935] ubi0: available PEBs: 0, total reserved PEBs: 668, PEBs reserved for bad PEB handling: 79 [ 2.559214] ubi0: background thread “ubi_bgt0d” started, PID 718 [ 2.559721] block ubiblock0_0: created from ubi0:0(rootfs) [ 2.574502] clk: Disabling unused clocks [ 2.583448] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.584009] Freeing unused kernel memory: 1600K [ 2.589736] Run /sbin/init as init process [ 2.593902] with arguments: [ 2.593904] /sbin/init [ 2.593907] with environment: [ 2.593909] HOME=/ [ 2.593912] TERM=linux [ 2.766896] init: Console is alive [ 2.767049] init: - watchdog - [ 3.316195] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.348699] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.390076] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 3.688408] adpt_hppe_uniphy_mode_set[1398]:INFO:ssdk doesn't support mode:0 in uniphy:0 on platform! [ 3.688576] regi_init[2525]:INFO:Initializing HPPE Done!! [ 3.696708] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 3.704661] EDMA ver 1 hw init [ 3.708294] EDMA HW Reset completed succesfully [ 3.710967] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 3.715379] RxDesc:1 (15-15) RxFill:1 (7-7) [ 3.720961] dp2: ppe offload disabled: 0 for macid 2 [ 3.724756] dp2: Switch attached to macid 2 status: 0 [ 3.915048] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 3.916029] dp3: ppe offload disabled: 0 for macid 3 [ 3.923942] dp3: Switch attached to macid 3 status: 0 [ 4.004670] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 4.005628] GMAC4(ffffff80041dd940) Invalid MAC@ - using 06:05:ec:db:bb:88 [ 4.013566] dp4: ppe offload disabled: 0 for macid 4 [ 4.020446] dp4: Switch attached to macid 4 status: 0 [ 4.094681] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 4.095655] GMAC5(ffffff8003a7b940) Invalid MAC@ - using 86:77:0b:7a:b8:82 [ 4.103574] dp5: ppe offload disabled: 0 for macid 5 [ 4.110455] dp5: Switch attached to macid 5 status: 0 [ 4.194695] Qualcomm QCA8075 90000.mdio-1:04: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:04, irq=POLL) [ 4.195579] [ 4.203586] * NSS Data Plane driver [ 4.210112] [ 4.227094] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.227147] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 4.231616] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010 [ 4.239123] xhci-hcd xhci-hcd.1.auto: irq 38, io mem 0x08a00000 [ 4.248541] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.254326] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 4.259873] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.268029] hub 1-0:1.0: USB hub found [ 4.274054] hub 1-0:1.0: 1 port detected [ 4.278255] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.282203] hub 2-0:1.0: USB hub found [ 4.290040] hub 2-0:1.0: 1 port detected [ 4.296855] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.300178] init: - preinit - [ 4.649999] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. [ 4.697611] mtdblock: MTD device 'u_env' is NAND, please consider using UBI block devices instead. [ 4.864111] mtdblock: MTD device 'u_env' is NAND, please consider using UBI block devices instead. [ 8.324484] nss-dp 3a001800.dp5 lan1: PHY Link up speed: 1000 [ 9.462049] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 9.462187] UBIFS (ubi0:1): background thread “ubifs_bgt0_1” started, PID 1011 [ 9.522201] UBIFS (ubi0:1): recovery needed [ 9.629285] UBIFS (ubi0:1): recovery completed [ 9.629407] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name “rootfs_data” [ 9.632631] UBIFS (ubi0:1): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 9.640557] UBIFS (ubi0:1): FS size: 138657792 bytes (132 MiB, 546 LEBs), max 556 LEBs, journal size 6856704 bytes (6 MiB, 27 LEBs) [ 9.650452] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) [ 9.662064] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID F37D681C-8C3F-4CA7-B9AA-612BC390C770, small LPT model [ 9.676603] mount_root: switching to ubifs overlay [ 9.685975] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 9.692277] urandom-seed: Seeding with /etc/urandom.seed [ 9.761020] nss-dp 3a001800.dp5 lan1: PHY Link is down [ 9.769855] procd: - early - [ 9.769964] procd: - watchdog - [ 10.329132] procd: - watchdog - [ 10.332030] procd: - ubus - [ 10.391182] procd: - init - [ 10.764686] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.889276] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a [ 10.889319] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2 [ 10.901405] NET: Registered PF_QIPCRTR protocol family [ 10.979779] PPP generic driver version 2.4.2 [ 10.980694] NET: Registered PF_PPPOX protocol family [ 10.993348] ath11k c000000.wifi: ipq8074 hw2.0 [ 10.993384] ath11k c000000.wifi: FW memory mode: 0 [ 11.024388] urngd: v1.0.2 started. [ 11.035198] remoteproc remoteproc0: powering up cd00000.q6v5_wcss [ 11.035618] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 12.188020] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up [ 12.231996] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 12.239466] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff [ 12.239503] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1 [ 12.397025] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss [ 12.397069] remoteproc remoteproc0: powering up cd00000.q6v5_wcss [ 12.403235] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 12.755810] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up [ 12.759019] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.799738] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 12.807247] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff [ 12.807297] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1 [ 13.194737] ath11k c000000.wifi: htt event 48 not handled [ 15.551629] br-lan: port 1(lan1) entered blocking state [ 15.551673] br-lan: port 1(lan1) entered disabled state [ 15.555861] nss-dp 3a001800.dp5 lan1: entered allmulticast mode [ 15.561176] nss-dp 3a001800.dp5 lan1: entered promiscuous mode [ 15.574885] br-lan: port 2(lan2) entered blocking state [ 15.574932] br-lan: port 2(lan2) entered disabled state [ 15.578972] nss-dp 3a001600.dp4 lan2: entered allmulticast mode [ 15.584399] nss-dp 3a001600.dp4 lan2: entered promiscuous mode [ 15.593683] br-lan: port 3(lan3) entered blocking state [ 15.596054] br-lan: port 3(lan3) entered disabled state [ 15.601129] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 15.606558] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 18.644474] nss-dp 3a001800.dp5 lan1: PHY Link up speed: 1000 [ 18.644534] br-lan: port 1(lan1) entered blocking state [ 18.649217] br-lan: port 1(lan1) entered forwarding state [ 18.734583] nss-dp 3a001200.dp2 wan: PHY Link up speed: 1000 [ 33.124363] l11: disabling