Linksys MR7350 1.0

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

Generic Router

Not supported.

CPU Ram Flash Network WLAN USB Serial JTag
Qualcomm Atheros IPQ6018LA 64 MiB 8 MiB 4x 10/100 bgn 1x 2.0 Yes ?
Architecture EXAMPLE MIPS
Vendor EXAMPLE Ralink
Bootloader EXAMPLE U-Boot
System-On-Chip EXAMPLE Ralink RT3052 - MIPS 24K V4.12
CPU/Speed EXAMPLE 451 MHz
Flash-Chip EXAMPLE unkown
Flash size EXAMPLE 8 MiB
RAM EXAMPLE 64 MiB
Wireless EXAMPLE RT2860v2 2.4GHz 802.11bgn
Ethernet EXAMPLE 10/100 Mbit/s w/ vlan support
Switch EXAMPLE Qualcomm Atheros QCA8337
USB EXAMPLE 1x 2.0
Serial EXAMPLE Yes
JTAG EXAMPLE Not populated

Insert photo of front of the casing

Insert photo of back of the casing

Insert photo of backside label

Insert photo of PCB

FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for Linksys MR7350 1.0
EXAMPLE 115200, 8N1

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2 S - IMAGE_VARIANT_STRING=IPQ6018LA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64 S - Boot Interface: NAND S - Secure Boot: Off S - Boot Config @ 0x000a602c = 0x000002e5 S - JTAG ID @ 0x000a607c = 0x001390e1 S - OEM ID @ 0x000a6080 = 0x00000000 S - Serial Number @ 0x000a4128 = 0x0642ed00 S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021 S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009 S - PBL Patch Ver: 1 S - I-cache: On S - D-cache: On B - 3413 - PBL, Start B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 5147 - elf_loader_entry, Start B - 5319 - auth_hash_seg_entry, Start B - 7786 - auth_hash_seg_exit, Start B - 8281 - elf_segs_hash_verify_entry, Start B - 110429 - elf_segs_hash_verify_exit, Start B - 114855 - auth_xbl_sec_hash_seg_entry, Start B - 114998 - auth_xbl_sec_hash_seg_exit, Start B - 121553 - xbl_sec_segs_hash_verify_entry, Start B - 121553 - xbl_sec_segs_hash_verify_exit, Start B - 122483 - PBL, End B - 103242 - SBL1, Start B - 243359 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4 B - 245799 - clock_init, Start D - 2836 - clock_init, Delta B - 254370 - boot_flash_init, Start D - 26199 - boot_flash_init, Delta B - 283741 - sbl1_ddr_set_default_params, Start D - 244 - sbl1_ddr_set_default_params, Delta B - 290360 - boot_config_data_table_init, Start D - 4727 - boot_config_data_table_init, Delta - (575 Bytes) B - 300211 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0 B - 305061 - Image Load, Start D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 314394 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 322263 - sbl1_ddr_set_params, Start B - 327234 - CPR configuration: 0x366 B - 330437 - Pre_DDR_clock_init, Start D - 183 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 367006 - Image Load, Start D - 427 - APDP Image Loaded, Delta - (0 Bytes) B - 380121 - Image Load, Start D - 457 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 382531 - Image Load, Start D - 884 - Auth Metadata D - 640 - Segments hash check D - 22234 - QSEE Dev Config Image Loaded, Delta - (36354 Bytes) B - 406748 - Image Load, Start D - 6466 - Auth Metadata D - 10675 - Segments hash check D - 329339 - QSEE Image Loaded, Delta - (1470632 Bytes) B - 736483 - Image Load, Start D - 702 - Auth Metadata D - 1007 - Segments hash check D - 34618 - RPM Image Loaded, Delta - (102664 Bytes) B - 772778 - Image Load, Start D - 701 - Auth Metadata D - 3203 - Segments hash check D - 118798 - APPSBL Image Loaded, Delta - (561320 Bytes) B - 907222 - SBL1, End D - 804285 - SBL1, Delta S - Flash Throughput, 5000 KB/s (2171545 Bytes, 422476 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz

U-Boot 2016.01 (Mar 18 2020 - 13:15:21 +0800)

CBT U-Boot ver: 2.3.01 ([IPQ6018].[SPF11.CSU1].[code version])

DRAM: smem ram ptable found: ver: 2 len: 4 512 MiB NAND: ONFI device found ID = 1590aac2 Vendor = c2 Device = aa SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000 ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 256 MiB MMC: sdhci: Node Not found, skipping initialization

PCI0 is not defined in the device tree In: serial@78B1000 Out: serial@78B1000 Err: serial@78B1000 machid: 8030200 eth0 MAC Address from ART is not valid eth1 MAC Address from ART is not valid eth2 MAC Address from ART is not valid eth3 MAC Address from ART is not valid eth4 MAC Address from ART is not valid eth5 MAC Address from ART is not valid

Updating boot_count … done

Hit any key to stop autoboot: 0 Setting bus to 0 Valid chip addresses: 62

NAND read: device 0 offset 0x6680000, size 0x800000 8388608 bytes read: OK ## Loading kernel from FIT Image at 44000000 …

 Using 'config@1' configuration
 Trying 'kernel@1' kernel subimage
   Description:  ARM Linksys Linux-4.4.60
   Type:         Kernel Image
   Compression:  gzip compressed
   Data Start:   0x440000e4
   Data Size:    4577078 Bytes = 4.4 MiB
   Architecture: ARM
   OS:           Linux
   Load Address: 0x41208000
   Entry Point:  0x41208000
   Hash algo:    crc32
   Hash value:   c0741528
   Hash algo:    sha1
   Hash value:   2dd7feb32fffa84b958eb19b8d34ecf0c9e12777
 Verifying Hash Integrity ... crc32+ sha1+ OK

## Loading fdt from FIT Image at 44000000 …

 Using 'config@1' configuration
 Trying 'fdt@1' fdt subimage
   Description:  ARM Linksys Elise device tree blob
   Type:         Flat Device Tree
   Compression:  uncompressed
   Data Start:   0x4445d94c
   Data Size:    67045 Bytes = 65.5 KiB
   Architecture: ARM
   Hash algo:    crc32
   Hash value:   3b3f4af7
   Hash algo:    sha1
   Hash value:   80960d4647a74007b900e699633a4870647d4d53
 Verifying Hash Integrity ... crc32+ sha1+ OK
 Booting using the fdt blob at 0x4445d94c
 Uncompressing Kernel Image ... OK
 Loading Device Tree to 484ec000, end 484ff5e4 ... OK

Could not find PCI in device tree Using machid 0x8030200 from environment

Starting kernel …

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.60 (root@build-vm) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r35193) ) #1 SMP PREEMPT Fri Jul 24 14:01:17 PDT 2020 [ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ6018/AP-CP03-C1 [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 11 pages/cpu @9eb3f000 s15424 r8192 d21440 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 110244 [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=alt_rootfs root=mtd:squashfs rootwait swiotlb=1 clk_ignore_unused coherent_pool=2M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 431092K/445440K available (6330K kernel code, 450K rwdata, 2096K rodata, 268K init, 358K bss, 14348K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0x9f800000 - 0xff800000 (1536 MB) [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80208000 - 0x80a42d00 (8428 kB) [ 0.000000] .init : 0x80a43000 - 0x80a86000 ( 268 kB) [ 0.000000] .data : 0x80a86000 - 0x80af6b5c ( 451 kB) [ 0.000000] .bss : 0x80af9000 - 0x80b52b98 ( 359 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000016] Switching to timer-based delay loop, resolution 41ns [ 0.000666] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000679] pid_max: default: 32768 minimum: 301 [ 0.000769] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000778] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001301] Initializing cgroup subsys io [ 0.001316] Initializing cgroup subsys memory [ 0.001338] Initializing cgroup subsys devices [ 0.001353] Initializing cgroup subsys freezer [ 0.001362] Initializing cgroup subsys net_cls [ 0.001371] Initializing cgroup subsys pids [ 0.001393] CPU: Testing write buffer coherency: ok [ 0.001762] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001808] Setting up static identity map for 0x41208280 - 0x412082d8 [ 0.090257] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.120238] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.150274] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.150328] Brought up 4 CPUs [ 0.150350] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.150356] CPU: All CPU(s) started in SVC mode. [ 0.168602] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4 [ 0.168891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.168914] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.169276] pinctrl core: initialized pinctrl subsystem [ 0.170314] NET: Registered protocol family 16 [ 0.171434] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.200113] cpuidle: using governor ladder [ 0.230131] cpuidle: using governor menu [ 0.244184] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.256257] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.256267] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.257781] CPU: IPQ6018, SoC Version: 1.0 [ 0.257995] <CORE> glink_init: IPC Logging Disabled [ 0.258283] <CORE> glink_core_register_transport: IPC Logging disabled [ 0.258352] msm_glink_smem_native_xprt rx fifo not found [ 0.258653] <CORE> glink_core_register_transport: IPC Logging disabled [ 0.258693] glink_core_link_up glink is up [ 0.258982] msm_rpm_dev_probe: APSS-RPM communication over GLINK [ 0.259059] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests [ 0.259947] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.262084] IPC logging disabled [ 0.262090] IPC logging disabled [ 0.262096] IPC logging disabled [ 0.262100] IPC logging disabled [ 0.262105] IPC logging disabled [ 0.262311] sps:sps is ready. [ 0.291807] usbcore: registered new interface driver usbfs [ 0.291866] usbcore: registered new interface driver hub [ 0.291935] usbcore: registered new device driver usb [ 0.292003] pps_core: LinuxPPS API ver. 1 registered [ 0.292010] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.292035] PTP clock support registered [ 0.293944] Bluetooth: Core ver 2.21 [ 0.293975] NET: Registered protocol family 31 [ 0.293981] Bluetooth: HCI device and connection manager initialized [ 0.293994] Bluetooth: HCI socket layer initialized [ 0.294004] Bluetooth: L2CAP socket layer initialized [ 0.294027] Bluetooth: SCO socket layer initialized [ 0.294310] clocksource: Switched to clocksource arch_sys_counter [ 0.297210] NET: Registered protocol family 2 [ 0.297770] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.297819] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.297894] TCP: Hash tables configured (established 4096 bind 4096) [ 0.297931] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.297953] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.298107] NET: Registered protocol family 1 [ 0.299166] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.307755] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.307776] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.311630] Key type asymmetric registered [ 0.311645] Asymmetric key parser 'x509' registered [ 0.311683] io scheduler noop registered [ 0.311696] io scheduler deadline registered (default) [ 0.320477] NET: Registered protocol family 27 [ 0.320488] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled [ 0.320505] qmi_log_init: IPC Logging disabled [ 0.320511] qmi_log_init: IPC Logging disabled [ 0.320647] msm_rpm_log_probe: OK [ 0.320960] msm-dcc b3000.dcc: DCC XPU is not specified [ 0.321185] msm-dcc b3000.dcc: DCC REG dump setup failed [ 0.321197] msm-dcc b3000.dcc: DCC SRAM dump setup failed [ 0.321221] msm-dcc b3000.dcc: jiffies_64: 0xffff8aef, cntvct_64: 0x6794734 [ 0.321232] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0x9fa7e004) [ 0.321242] msm-dcc b3000.dcc: gcnt_lo: 0x06794953(0x9fa7e000) [ 0.321810] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 0.322591] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.322627] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.322658] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 20, base_baud = 1500000) is a MSM [ 0.322972] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.322999] msm_serial 78b1000.serial: uartclk = 1843200 [ 0.323024] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 21, base_baud = 115200) is a MSM [ 0.323039] msm_serial: console setup on port #0 [ 1.080871] console [ttyMSM0] enabled [ 1.085902] msm_serial: driver initialized [ 1.089398] msm_serial_hsl_init: driver initialized [ 1.102661] brd: module loaded [ 1.103302] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.106301] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 0, 0 [ 1.112764] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xaa [ 1.118200] nand: ONFI 10-Compliant Macronix MX30UF2G18AC [ 1.124706] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.130044] 20 ofpart partitions found on MTD device qcom_nand.0 [ 1.137433] Creating 20 MTD partitions on “qcom_nand.0”: [ 1.143583] 0x000000000000-0x000000180000 : “0:SBL1” [ 1.150915] 0x000000180000-0x000000280000 : “0:MIBIB” [ 1.155420] 0x000000280000-0x000000600000 : “0:QSEE” [ 1.162236] 0x000000600000-0x000000680000 : “0:DEVCFG” [ 1.165056] 0x000000680000-0x000000700000 : “0:RPM” [ 1.169883] 0x000000700000-0x000000780000 : “0:CDT” [ 1.174668] 0x000000780000-0x000000800000 : “0:APPSBLENV” [ 1.179539] 0x000000800000-0x000000980000 : “0:APPSBL” [ 1.185862] 0x000000980000-0x000000a00000 : “0:ART” [ 1.190167] 0x000000a00000-0x000001300000 : “0:WIFIFW” [ 1.201095] 0x000001300000-0x000001380000 : “0:ETHPHYFW” [ 1.202354] 0x000001380000-0x000001400000 : “u_env” [ 1.206707] 0x000001400000-0x000001440000 : “s_env” [ 1.211054] 0x000001440000-0x000001480000 : “devinfo” [ 1.215879] 0x000001480000-0x000006680000 : “kernel” [ 1.282206] 0x000001c80000-0x000006680000 : “rootfs” [ 1.337997] mtd: device 15 (rootfs) set to be root filesystem [ 1.338257] mtdsplit: no squashfs found in “rootfs” [ 1.342722] 0x000006680000-0x00000b880000 : “alt_kernel” [ 1.409127] 0x000006e80000-0x00000b880000 : “alt_rootfs” [ 1.465306] 0x00000b880000-0x00000ba80000 : “sysdiag” [ 1.467653] 0x00000ba80000-0x00000fe80000 : “syscfg” [ 1.521213] libphy: Fixed MDIO Bus: probed [ 1.741980] qca-mdio 90000.mdio: Could not find phy-reset-gpio [ 1.742128] libphy: qca_mdio: probed [ 1.747949] qca-mdio 90000.mdio: qca-mdio driver was registered [ 1.750561] Unable to create IPC log context! [ 1.756510] cnss: Platform driver probed successfully. [ 1.761043] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 1.765665] dummy_hcd dummy_hcd.0: Dummy host controller [ 1.772829] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 1.779023] hub 1-0:1.0: USB hub found [ 1.785810] hub 1-0:1.0: 1 port detected [ 1.789953] i2c /dev entries driver [ 1.799328] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.799368] Bluetooth: HCI UART driver ver 2.3 [ 1.806848] Bluetooth: HCI UART protocol H4 registered [ 1.811076] Bluetooth: HCI UART protocol BCSP registered [ 1.816213] Bluetooth: HCI UART protocol ATH3K registered [ 1.822091] sdhci: Secure Digital Host Controller Interface driver [ 1.826980] sdhci: Copyright© Pierre Ossman [ 1.833044] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.838438] leds-pca963x 0-0062: PCA963X_HW_BLINK ON [ 1.845801] [ 1.845801] Version Rollback Feature Disabled [ 1.848726] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x08b04000 [ 1.853793] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x08b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x08b04000 [ 1.869688] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x08b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x08b04000 [ 1.884172] sps:BAM 0x08b04000 is registered.[ 1.891427] DEV CI test message [ 1.895566] remoteproc remoteproc0: q6v5-wcss is available [ 1.898433] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group [ 1.903544] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group [ 1.913979] remoteproc remoteproc1: q6v5-m3 is available [ 1.924615] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 [ 1.929577] coresight-csr 6001000.csr: CSR initialized [ 1.937031] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 [ 1.942004] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 [ 1.949566] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 [ 1.956944] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 [ 1.964318] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 [ 1.971689] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 [ 1.979078] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 [ 1.986470] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 [ 1.993822] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 [ 2.001227] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 [ 2.008592] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 [ 2.015954] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 [ 2.023315] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 [ 2.030706] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 [ 2.038091] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 [ 2.045555] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 [ 2.052839] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 [ 2.060348] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 [ 2.067727] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 [ 2.075135] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 [ 2.082545] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 [ 2.089903] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06064000 [ 2.096952] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06064000 [ 2.112643] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06064000 [ 2.127151] sps:BAM 0x06064000 is registered.[ 2.133826] coresight-tmc 6048000.tmc: TMC REG dump setup failed. ret: -38 [ 2.138109] coresight-tmc 6048000.tmc: TMC initialized [ 2.144922] coresight-tmc 6047000.tmc: TMC ETF-ETB dump setup failed. ret: -38 [ 2.149889] coresight-tmc 6047000.tmc: TMC REG dump setup failed. ret: -38 [ 2.157353] coresight-tmc 6047000.tmc: TMC initialized [ 2.164321] coresight-funnel 6041000.funnel: FUNNEL initialized [ 2.169306] coresight-funnel 6100000.funnel: FUNNEL initialized [ 2.175134] coresight-funnel 6130000.funnel: FUNNEL initialized [ 2.181032] coresight-funnel 6120000.funnel: FUNNEL initialized [ 2.186955] coresight-funnel 61a1000.funnel: FUNNEL initialized [ 2.193092] coresight-etm4x 619c000.etm: ETM REG dump setup failed. ret -38 [ 2.198956] coresight-etm4x 619c000.etm: ETM 4.0 initialized [ 2.205698] coresight-etm4x 619d000.etm: ETM REG dump setup failed. ret -38 [ 2.211788] coresight-etm4x 619d000.etm: ETM 4.0 initialized [ 2.218328] coresight-etm4x 619e000.etm: ETM REG dump setup failed. ret -38 [ 2.224393] coresight-etm4x 619e000.etm: ETM 4.0 initialized [ 2.230925] coresight-etm4x 619f000.etm: ETM REG dump setup failed. ret -38 [ 2.236990] coresight-etm4x 619f000.etm: ETM 4.0 initialized [ 2.243483] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized [ 2.249529] coresight-stm 6002000.stm: STM initialized [ 2.258185] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 [ 2.261900] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 2.269940] u32 classifier [ 2.277058] input device check on [ 2.279562] Actions configured [ 2.283330] Netfilter messages via NETLINK v0.30. [ 2.286682] nf_conntrack version 0.5.0 (6735 buckets, 26940 max) [ 2.291889] nf_conntrack_rtsp v0.7 loading [ 2.297527] nf_tables: © 2007-2009 Patrick McHardy kaber@trash.net [ 2.301379] nf_tables_compat: © 2012 Pablo Neira Ayuso pablo@netfilter.org [ 2.308226] xt_time: kernel timezone is -0000 [ 2.315092] ip_set: protocol 6 [ 2.319689] gre: GRE over IPv4 demultiplexor driver [ 2.322453] ip_gre: GRE over IPv4 tunneling driver [ 2.328322] nf_nat_rtsp v0.7 loading [ 2.332190] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.336023] arp_tables: (C) 2002 David S. Miller [ 2.341855] NET: Registered protocol family 10 [ 2.346718] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.350263] sit: IPv6 over IPv4 tunneling driver [ 2.356658] ip6_gre: GRE over IPv6 tunneling driver [ 2.360716] NET: Registered protocol family 17 [ 2.364779] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.369280] Bridge firewalling registered [ 2.382215] Ebtables v2.0 registered [ 2.386152] Bluetooth: RFCOMM TTY layer initialized [ 2.389554] Bluetooth: RFCOMM socket layer initialized [ 2.394165] Bluetooth: RFCOMM ver 1.11 [ 2.399407] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.403091] Bluetooth: BNEP filters: protocol multicast [ 2.408604] Bluetooth: BNEP socket layer initialized [ 2.413537] l2tp_core: L2TP core driver, V2.0 [ 2.418752] l2tp_netlink: L2TP netlink interface [ 2.422998] 8021q: 802.1Q VLAN Support v1.8 [ 2.428474] Registering SWP/SWPB emulation handler [ 2.433612] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 2.436682] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 2.443634] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 2.450249] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 2.457908] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 2.465420] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 2.474552] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 2.481486] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 2.491481] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 862500 uV [ 2.501291] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 937500 uV [ 2.511136] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 530, quot_offset[ 7]= 0 [ 2.520914] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 717, quot_offset[ 7]= 185 [ 2.531763] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 833, quot_offset[ 7]= 115 [ 2.542700] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 942, quot_offset[ 7]= 105 [ 2.553892] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 2.566262] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz [ 2.571997] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 864000 KHz [ 2.579306] ubi0: attaching mtd17 [ 2.659960] random: nonblocking pool is initialized [ 2.884752] ubi0: scanning is finished [ 2.890010] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 34, need 40 [ 2.890500] ubi0: attached mtd17 (name “alt_rootfs”, size 74 MiB) [ 2.899251] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.905498] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.912260] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.919125] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.925894] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.932141] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1088489430 [ 2.939183] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 34 [ 2.948484] ubi0: background thread “ubi_bgt0d” started, PID 134 [ 2.957994] hctosys: unable to open rtc device (rtc0) [ 2.970233] clk: Not disabling unused clocks [ 2.972532] VFS: Mounted root (squashfs filesystem) readonly on device 31:20. [ 2.973781] Freeing unused kernel memory: 268K (80a43000 - 80a86000) *

            _        _  __    _    __ _____ __   __ _____
           | |      | ||  \  | |  / // ____]\ \ / // ____]TM
           | |      | ||   \ | | / /| (___   \ V /| (____
           | |      | || |\ \| |\ \  \____ \  \ /  \____ \
           | |_____ | || | \   | \ \  ____) | | |   ____) |
           |_______||_||_|  \__|  \_\[____ /  |_|  [_____/

© 2013 Belkin International, Inc. and/or its affiliates. All rights reserved. Booting elise (firmware version 1.1.4.202174) * [utopia][init] System Initialization [utopia][init] Creating /proc [utopia][init] Creating /sys [utopia][init] Creating /dev [utopia][init] Creating /tmp [utopia][init] Allocating 60M for /tmp [utopia][init] Prepairing /dev/pts [utopia][init] Setting /tmp and /var permissions [utopia][init] Starting udev.. Attempting mount of ubifs syscfg partition UBI device number 1, total 544 LEBs (69074944 bytes, 65.9 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [utopia][init] Using persistent syscfg data from /var/config/syscfg [utopia][init] Starting system logging [utopia][init] Starting sysevent subsystem [utopia][init] Starting blue … [utopia][init] Checking HW version…XB [utopia][init] Enabling DesignWare USB3 DRD Core drivers [utopia][init] Loading QCA Ethernet, NSS and GMAC drivers net.netfilter.nf_conntrack_acct = 1 [utopia][init] Late loading usb drivers modprobe: module nls_utf8 not found in modules.dep [utopia][init] Setting any unset system values to default [utopia][init] no persistence config file (/var/config/pstcfg) found setting up MAC addresses for all interface based on E8:9F:80:77:EE:2B Updating NTP Servers if necessary [utopia][init] syscfg loaded removing tmp file

SSDK Init OK! operation done.

checking for interactive script start up… no user scheduled tasks found… senq running /etc/init.d/service_senq.sh Starting in mode 0 1970-01-01 00:00:10: node-mode running Good block at 0x00000000 Updating BootCount Page[18]:9000 … Done

[utopia][init] LAN Ports LED settings attempting to sync sysinfo.cgi auth credentials [utopia][init] Loading Buttons drivers [utopia][init] Setup link to WiFi firmware and board data (US) [utopia][init] Multi-region is not supported or not enabled [utopia][init] Cert region: US [utopia][init] No REGION definded, use FCC [utopia][init] Load WiFi cal data from MTD(mtd8) to FS. 65536+0 records in 65536+0 records out 65536 bytes (64.0KB) copied, 0.293176 seconds, 218.3KB/s [utopia][init] Loading WLAN drivers [ 16.743779] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done [ 17.770193] glink_core_link_up glink is up [ 17.770401] glink_xprt_open_event NSS Auto scaling disabled [utopia][init] Loading QCA Enhanced Connection manager net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 [utopia][init] Initializing BTLE interface [utopia][init] Bluetooth Mac Address: E8 9F 80 77 EE 2B [utopia][init] Cert Region: US [utopia][init] BT PSR: /etc/pb-234-csr8x11-rev2.psr Device setup complete Loading PSKEY_HCI_LMP_LOCAL_VERSION … done Loading PSKEY_LMP_REMOTE_VERSION … done Loading 0x212c … done Loading 0x212d … done Loading 0x212e … done Loading 0x212f … done Loading 0x2130 … done Loading 0x2131 … done Loading 0x2132 … done Loading 0x2133 … done Loading 0x2134 … done Loading 0x2135 … done Loading 0x2136 … done Loading 0x2137 … done Loading 0x220b … done Loading 0x222b … done Loading 0x222c … done Loading 0x2139 … done Loading 0x213a … done Loading 0x213b … done Loading PSKEY_LC_MAX_TX_POWER … done Loading PSKEY_HOST_INTERFACE … done Loading 0x01ea … done Loading PSKEY_ANA_FREQ … done Loading PSKEY_ANA_FTRIM … done Loading 0x22c8 … done inserting fpbypass.ko for QCA attempting to sync sysinfo.cgi auth credentials adding group for lldpd user Thu Oct 11 06:00:00 UTC 2012

(none) login: Starting devicedb … wan, sysevent received: wan-start

DeviceDB database version 3 Options:

  Daemonize       : yes
  Server UDS Path   : /tmp/devicedb/server_link
  Database File     : /tmp/devicedb/devicedb.db
  DB Transient File : /tmp/devicedb/transient.db

DeviceDB Daily Backup Cron job created No TopoDB persistence data to import TopoDB data not imported lldpd event lan_ipaddr 192.168.1.1 received. killall: lldpd: no process killed ARP agent not started: not in master mode. Device setup complete lldpd event lldpd-start received. RTNETLINK answers: Device or resource busy Starting ddd_ethernet_agent … lldpd configuration already running setting root_accessible to 0 by default [utopia][init] BTLE interface ready to use mosquitto aborting: not Master lldp updating callback scripts subscriber running /etc/init.d/service_subscriber.sh lan-status starting MODE: 0 service_guardian.sh is called with lan-status /etc/init.d/service_subscriber.sh lan-status starting: Not Master; ignoring status change (mode: 0) Entry tsmb lan-status, 1

lldpd event lldp::root_accessible 0 received. lldpd event ETH::port_1_status down received. lldpd event ETH::port_2_status down received. lldpd event ETH::port_3_status down received. lldpd event ETH::port_4_status down received. lldpd event ETH::port_5_status down received. nss_build_bypass is called with lan-started [utopia] Not setting ppp_clamp_mtu Lighttpd Model Base: MR73 Generating Rainier lighttpd config Build temporary www configuration directory: TSLIIHauhEfGE conntrack_parse running creating conntrack cron job ARP agent not started: not in master mode. Power cycle Ethernet ports. Registering Service myrouter._http._tcp.local port 80 Got a reply for myrouter._http._tcp.local.: Name now registered and active wifi, sysevent received: lan-started (Wed Oct 10 23:00:08 PDT 2012) wifi, service_start() [utopia][init] Loading GMAC and WLAN drivers [utopia][init] Creating wifi devices Multi-region is not supported or not enabled mosquitto aborting: not Master /etc/init.d/service_subscriber.sh lan-status started MODE: 0 /etc/init.d/service_subscriber.sh lan-status started: Not Master; ignoring status change (mode: 0) service_guardian.sh is called with lan-status Entry tsmb lan-status, 1 backhaul_switching status event backhaul::media 0 received on backhaul_switching_mgr Backhaul media 0 received, but wifi status is not started. Will do backhaul check later backhaul_switching status event system_state-normal received smart connect client, generating client device data wifi, wifi_physical_start(ath0) dev.nss.n2hcfg.n2h_high_water_core0 = 8704 dev.nss.n2hcfg.extra_pbuf_core0 = 3100000 dev.nss.n2hcfg.n2h_high_water_core0 = 30624 dev.nss.n2hcfg.n2h_wifi_pool_buf = 8192 dev.nss.n2hcfg.n2h_queue_limit_core0 = 256 sysctl: error: 'dev.nss.n2hcfg.n2h_queue_limit_core1' is an unknown key ath0 No such device

Auto channel wifi, wifi_virtual_start(ath0) Not ready for JNAP. Sleeping for 15 seconds… wifi, wifi_user_start(ath0) Interface doesn't accept private ioctl… he_mubfee (8BE0): Invalid argument wifi_user, ath0 TxBF enabled Interface doesn't accept private ioctl… he_mubfee (8BE0): Invalid argument wifi, primary AP: ath0 is up (Wed Oct 10 23:00:18 PDT 2012) wifi, wifi_guest_start(ath0) wifi, guest ath2 is disabled, do not start wifi guest wifi, smart::mode is unconfigured do not start smart connect setup and config wifi wifi, wifi_physical_start(ath1) dev.nss.n2hcfg.n2h_high_water_core0 = 26528 sysctl: short write dev.nss.n2hcfg.n2h_high_water_core0 = 30624 dev.nss.n2hcfg.n2h_wifi_pool_buf = 8192 dev.nss.n2hcfg.n2h_queue_limit_core0 = 256 sysctl: error: 'dev.nss.n2hcfg.n2h_queue_limit_core1' is an unknown key ath1 No such device

List Flushed Following channels are blocked from Channel selection algorithm [52] [56] [60] [64] [100] [104] [108] [112] [116] [120] [124] [128] [132] [136] [140] Auto channel wifi, wifi_virtual_start(ath1) [utopia] Not setting ppp_clamp_mtu on dslite protocol wan, sysevent received: phylink_wan_state wifi, wifi_user_start(ath1) Interface doesn't accept private ioctl… he_mubfee (8BE0): Invalid argument wifi_user, ath1 TxBF enabled Interface doesn't accept private ioctl… he_mubfee (8BE0): Invalid argument wifi_user, ath1 MU-MIMO enabled wifi, primary AP: ath1 is up (Wed Oct 10 23:00:23 PDT 2012) wifi, wifi_guest_start(ath1) wifi, guest ath3 is disabled, do not start wifi guest wifi, start_hostapd() wifi, start hostapd (Wed Oct 10 23:00:24 PDT 2012) Configuration file: /tmp/hostapd-ath0.conf Configuration file: /tmp/hostapd-ath1.conf rfkill: Cannot open RFKILL control device ACS: Automatic channel selection started, this may take a bit ACS: Offloading to driver rfkill: Cannot open RFKILL control device ACS: Automatic channel selection started, this may take a bit ACS: Offloading to driver nss_build_bypass is called with guardian-configured nss_build_bypass is called with ipv4_wan_ipaddr getting geoip information for 0.0.0.0

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                               Dload  Upload   Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (6) Could not resolve: freegeoip.net (Could not contact DNS servers)

lldpd event ipv4_wan_ipaddr 0.0.0.0 received. nl80211: ACS Results: PCH: 48 SCH: 36 BW: 80 VHT0: 42 VHT1: 0 HW_MODE: 2 ath1: ACS-COMPLETED freq=5240 channel=48 wpa_driver_nl80211_set_key: ifindex=21 (ath1) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=21 (ath1) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=21 (ath1) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=21 (ath1) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface ath1 with hwaddr e8:9f:80:77:ee:2d and ssid “_LinksysSetupE2B” wpa_driver_nl80211_set_key: ifindex=21 (ath1) alg=3 addr=0x54d0f670 key_idx=1 set_tx=1 seq_len=0 key_len=16 ath1: interface state UNINITIALIZED→ENABLED ath1: AP-ENABLED ath1: IEEE 802.11 driver had channel switch: freq=5240, ht=1, vht_ch=0x0, offset=-1, width=3 (80 MHz), cf1=5210, cf2=0 ath1: CTRL-EVENT-CHANNEL-SWITCH freq=5240 ht_enabled=1 ch_offset=-1 ch_width=80 MHz cf1=5210 cf2=0 dfs=0 Entry tsmb tsmb-stop, 1 nl80211: ACS Results: PCH: 11 SCH: 7 BW: 40 VHT0: 9 VHT1: 0 HW_MODE: 1 ath0: ACS-COMPLETED freq=2462 channel=11 wpa_driver_nl80211_set_key: ifindex=20 (ath0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=20 (ath0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=20 (ath0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=20 (ath0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface ath0 with hwaddr e8:9f:80:77:ee:2c and ssid “_LinksysSetupE2B” wpa_driver_nl80211_set_key: ifindex=20 (ath0) alg=3 addr=0x54d0f670 key_idx=1 set_tx=1 seq_len=0 key_len=16 ath0: interface state UNINITIALIZED→ENABLED ath0: AP-ENABLED ath0: IEEE 802.11 driver had channel switch: freq=2462, ht=1, vht_ch=0x0, offset=-1, width=2 (40 MHz), cf1=2452, cf2=0 ath0: CTRL-EVENT-CHANNEL-SWITCH freq=2462 ht_enabled=1 ch_offset=-1 ch_width=40 MHz cf1=2452 cf2=0 dfs=0 killall: mdns_lookup: no process killed LookUpMaster call OK. mDNS lookup is on going… smart_connect, sysevent received: wifi-status starting start mcsd succeeded (Wed Oct 10 23:00:29 PDT 2012) 23.00.30.008398 MCSD plugin info : Initializing plugin manager fastpath, sysevent received: qos_enabled net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 Restarting nfqrecv service… btsetup service btsetup: smart_connect::setup_status state_machine entering READY ==⇒ RESET ELISE usb power btsetup: Unconfigured mode and Peripheral role pub_devinfo_status: Error: could not determine HOST_ADDR bluetoothd.init: /var/run/dbus created bluetoothd.init: dbus-daemon started pub_wlan_status: Error: could not determine HOST_ADDR hcisetup: Enabled LE advertising smart_connect, sysevent received: wifi-status started Got a TERM signal, will terminate. Warning! nfqrecv encountered errors when doing recv(): Interrupted system call killall: nfqrecv: no process killed ping: bad address 'www.linksys.com' [fw.sh] fwup_checked_after_boot: 0 [fwupd] status details:“ERROR: Connecting server” [fw.sh] fwup_forced_update: 0 Entry tsmb tsmb-stop, 1 Entry tsmb tsmb-start, 1


COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/03/13 20:51
  • by png