Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:linksys:linksys_ea8350_1 [2023/02/17 18:17] – [Tags] danitoolinbox:toh:linksys:linksys_ea8350_1 [2024/06/26 20:36] – [Installation] sergeyfilippov
Line 1: Line 1:
 ====== Linksys E8350 V1====== ====== Linksys E8350 V1======
 ~~NOTOC~~ ~~NOTOC~~
- 
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ 
  
 {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}
  
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//+AC2400 Dual-Band Gigabit Wi-Fi Router. 
 +/* //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//*/
  
 /*****/ /*****/
Line 18: Line 17:
  
 <color red>**WiP.**</color> <color red>**WiP.**</color>
- 
- 
-===== Supporting activities ===== 
-//Describe if there are any ongoing activities that might lead to OpenWrt support.// 
- 
-  * OpenWrt forum thread: [[https://forum.openwrt.org/t/e8350-why-not-supported-by-openwrt/57640]] 
-  * Custom build for Linksys E8350: Openwrt test image based on the trunk development tree OpenWrt SNAPSHOT.\\ [[https://drive.google.com/drive/folders/1LsIYCS_EU_XXwIVmwNO91gnojiGA6uz7?usp=sharing]] 
-    * Flash it over the native Linksys WEB interface. 
-    * 5GHz wifi configuration is done manually via editing the /etc/rc.local file.\\ (LuCI web interface does not know how to properly handle quantenna driver at the moment) 
- 
- 
-/*** if info available: uncomment and fill in 
-===== Experimental firmware ===== 
-WiP 
-//List experimental firmware download links here.// 
- 
-//None at this time.// 
- 
-  * External image (add link) 
-  * trunk image (add link) 
-  * ... 
-***/ 
- 
  
 ===== Hardware highlights ===== ===== Hardware highlights =====
Line 56: Line 32:
 ***/ ***/
  
 +===== Installation =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
 +  "filterColumns": {"brand": "^Linksys$", "model": "^E8350$"}
 +} -->
 +
 +→ [[docs:guide-user:installation:generic.flashing|Install OpenWrt]]
 +
 +<color #ed1c24>!</color> Currently available firmware is **snapshot** only, so **it will not have a web UI**.\\
 +A snapshot build with LUCI(web UI) and attached kmods archive [[https://github.com/SergeyFilippov/openwrt/releases/tag/v24.0.0-beta-snapshot]]. \\ //Will be removed after v24 release.//
  
-===== De-bricking =====+===== OEM Easy Installation ===== 
 +  - Login to router web UI 
 +  - Got to Administration/Firmware upgrade 
 +  - Use factory image from latest available release (*factory.bin)
  
-  - Get the original firmware: [[https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.03.003_20180929.bin]]+===== De-bricking / Recovery-mode Installation ===== 
 + 
 +Since this router has 2 flash chips it's almost unbrickable. 
 + 
 +  - Get the original firmware: [[https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.03.003_20180929.bin]] or *factory.bin of OpenWrt
   - Power off the device and disconnect the WAN port. (Only LAN port to be connected)   - Power off the device and disconnect the WAN port. (Only LAN port to be connected)
   - Press & hold the "Reset" button   - Press & hold the "Reset" button
Line 66: Line 63:
   - Open the Firmware Recovery page in your browser: http://192.168.1.1/index.shtml\\ //Firmware Recovery -> File Name -> Recovery & Reboot//   - Open the Firmware Recovery page in your browser: http://192.168.1.1/index.shtml\\ //Firmware Recovery -> File Name -> Recovery & Reboot//
  
 +===== Going back to Linksys Firmware / Flashing back to stock =====
 +  - Follow the instructions in De-bricking / Recovery-mode Installation with an original firmware
  
 /*** if info available: uncomment and fill in /*** if info available: uncomment and fill in
Line 80: Line 79:
  
 ===== Specific configuration ===== ===== Specific configuration =====
- 
-/*** if info available: uncomment and fill in 
-<WRAP BOX 600px> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. 
  
 ==== Network interfaces ==== ==== Network interfaces ====
 The default network configuration is: The default network configuration is:
 ^ Interface Name   ^ Description                  ^ Default configuration    ^ ^ Interface Name   ^ Description                  ^ Default configuration    ^
-| br-lan           EXAMPLE LAN & WiFi           EXAMPLE 192.168.1.1/24   | +| br-lan           | LAN & WiFi           | 192.168.1.1/24   | 
-vlan0 (eth0.0)   EXAMPLE LAN ports (1 to 4)   EXAMPLE None             | +vlan1 (eth0.1)   | LAN ports (1 to 4)   | None             | 
-vlan1 (eth0.1)   EXAMPLE WAN port             EXAMPLE DHCP             | +vlan2 (eth0.2)   | WAN port             | DHCP             | 
-wl0              EXAMPLE WiFi                 EXAMPLE Disabled         | +wlan0            | WiFi (2.4 GHz)       | Disabled         | 
-</WRAP> +/* | wlan1            | WiFi (5 GHz)         | Disabled         *
-***/+
  
  
Line 110: Line 104:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-^ Architecture     | ARM (armv7l cortex-a15+neon vfpv4)          +^ Architecture    | ARM (armv7l cortex-a15+neon vfpv4)         
-^ Vendor           | Linksys                                     +^ Vendor          | Linksys                                    
-^ Bootloader       | U-Boot                                      +^ Bootloader      | U-Boot                                     
-^ System-On-Chip   | Qualcomm IPQ8064 @ 1.4 GHz                  +^ System-On-Chip  | Qualcomm IPQ8064 @ 1.4 GHz                 
-^ CPU/Speed        | 2 x 1.4 GHz                                 +^ CPU/Speed       | 2 x 1.4 GHz                                
-^ Flash-Chips      | SPI MX25U3235F + NAND MT29F1G08ABBDAH4      +^ Flash-Chips     | SPI MX25U3235F + NAND S34MS01G2            
-^ Flash sizes      | 4 MiB SPI + 128 MiB  NAND                   +^ Flash sizes     | 4 MiB SPI + 128 MiB  NAND                  
-^ RAM              | 512 MiB   (491 MiB for the OS)              +^ RAM             | 512 MiB   (491 MiB for the OS)             
-^ Wireless       | Qualcomm QCA9880 2.4GHz 802.11bgn           +^ Wireless      | Qualcomm QCA9880 2.4GHz 802.11bgn          
-^ Wireless       | Quantenna QSR1000 5GHz 802.11ac             +^ Wireless      | Quantenna QSR1000 5GHz 802.11ac            
-^ Ethernet         | 4 x 10/100/1000 Mbit/s w/ vlan support      +^ Ethernet        | 4 x 10/100/1000 Mbit/s w/ vlan support     
-^ Switch           | Qualcomm Atheros QCA8337                    +^ Switch          | Qualcomm Atheros QCA8337                   
-^ USB              | 1 x 3.0 + 1 x 2.0 (combo with eSata port)   +^ USB             | 1 x 3.0 + 1 x 2.0 (combo with eSata port)  
-^ eSata            | 1 (combo with one of the USB ports)         +^ eSata           | 1 (combo with one of the USB ports)        
-^ Serial           | [[#Serial|Yes]]                             +^ Serial          | [[#Serial|Yes]]                            
-^ JTAG             | [[#JTAG|Not populated]]                     |+^ JTAG            | [[#JTAG|Not populated]]                    |
  
  
 ==== Flash Layout ==== ==== Flash Layout ====
 +**"mtd2 - mtd16"** - small SPI flash - u-boot & board configs.
  
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).//+^ Layer0  |  SPI NOR flash 4 MiB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         ||||||||||||||||| 
 +^ Layer1  |  mtd2 **//0:sbl1//** \\ 64 KiB\\ first stage boot loader  |  mtd3 **//0:mibib//** \\ 128 KiB  |  mtd4 **//0:sbl2//** \\ 128 KiB        |||  mtd5 **//0:sbl3//**\\ 192 KiB  | mtd6 **//0:ddrconfig//**\\ 64 KiB  | mtd7 **//0:ssd//**\\ 64 KiB  | mtd8 **//0:tz//**\\ 192 KiB  | mtd9 **//0:rpm//**\\ 128 KiB  | mtd10 **//0:oldappsbl//**\\ 256 KiB  | mtd11 **//0:appsblenv//**\\ 256 KiB\\ Device MAC address is here  | mtd12 **//0:ART//**\\ 128 KiB  | mtd13 **//0:uboot//**\\ 320 KiB  mtd14 **//0:oldnss1//**\\ 128 KiB  | mtd15 **//0:nvram//**\\ 128 KiB  | mtd16 **//0:oldkernel//**\\ 1920 KiB\\ Not used. Kernel in NAND UBI  |
  
-FIXME //Please consolidate the two flash layout sections below into one.//+**"mtd0-mtd1"** - is the big NAND flash. **"mtd0"** used as /dev/ubi0.
  
-<code> +^ Layer0  |  NAND flash 128 MiB                                                                                                                                                                                                                                                                                                                                                                     |||| 
-# cat /proc/mtd  +| Layer1  |  mtd0 **//ubi//**\\ 64 MiB                                                                                                                                                                                                                                                                                                                                ||| mtd1 **//extra//**\\ 64 MiB  | 
-dev:    size   erasesize  name +| Layer2  |  UBI partition **///dev/ubi0//**                                                                                                                                                                                                                                                                                                                               ||| Not used                     | 
-mtd0: 04000000 00020000 "rootfs+| Layer3  | **''kernel''** **///dev/ubi0_0//**\\ Linux kernel (raw image)  | **''rootfs''**  **///dev/ubi0_1//**\\ mounted: "''/rom''", [[docs:techref:filesystems#SquashFS|SquashFS]] \\ size depends on selected packages  | **''rootfs_data''** **///dev/ubi0_2//**\\ mounted: "''/overlay''", [[docs:techref:filesystems#UBIFS|UBIFS]] \\ all remaining free space  |                              |
-mtd100010000 00010000 "sbl1" +
-mtd200020000 00010000 "mibib" +
-mtd300020000 00010000 "sbl2" +
-mtd400030000 00010000 "sbl3" +
-mtd500010000 00010000 "ddrconfig" +
-mtd600010000 00010000 "ssd" +
-mtd7: 00030000 00010000 "tz" +
-mtd8: 00020000 00010000 "rpm" +
-mtd9: 00040000 00010000 "oldappsbl" +
-mtd10: 00040000 00010000 "APPSBLENV" +
-mtd11: 00020000 00010000 "ART" +
-mtd12: 00050000 00010000 "uboot" +
-mtd13: 00020000 00010000 "oldnss1" +
-mtd14: 00020000 00010000 "nvram" +
-mtd15: 001e0000 00010000 "oldkernel" +
-mtd16: 001d1000 0001f000 "kernel" +
-mtd17: 01d2f000 0001f000 "ubi_rootfs" +
-mtd18: 01de9000 0001f000 "ubi_rootfs_data"+
  
-mtd0: 04000000 00020000 "rootfs"  - is the big NAND flash used as /dev/ubi0 
-mtd16: 001d1000 0001f000 "kernel" -> /dev/ubi0_0 
-mtd17: 01d2f000 0001f000 "ubi_rootfs" -> /dev/ubi0_1 
-mtd18: 01de9000 0001f000 "ubi_rootfs_data" -> /dev/ubi0_2 
- 
-mtd1 - mtd15 - small SPI flash - u-boot & board configs 
-</code> 
  
  
 ==== FLASH partitions ==== ==== FLASH partitions ====
 <code> <code>
-# cat /proc/mtd +# cat /proc/mtd  
-dev:    size   erasesize  name +dev:    size   erasesize  name  
-mtd0: 04000000 00020000 "ubi"  -> main rootfs 64MiB ( 1-st part of nand 128 MiB ) - contains kernel,rootfs, roofs_data(overlay) +mtd0: 04000000 00020000 "ubi" 128MiB flash 
-mtd1: 04000000 00020000 "extra" -> not used by default 64MiB ( 2-nd part of nand 128 MiB ) +mtd1: 04000000 00020000 "extra" 128MiB flash 
-mtd2: 00010000 00010000 "0:SBL1-> SPI 4MiB flash - first stage boot loader +mtd2: 00010000 00010000 "0:sbl1" SPI 4MiB flash 
-mtd3: 00020000 00010000 "0:MIBIB-> SPI 4MiB flash +mtd3: 00020000 00010000 "0:mibib" SPI 4MiB flash 
-mtd4: 00020000 00010000 "0:SBL2-> SPI 4MiB flash +mtd4: 00020000 00010000 "0:sbl2" SPI 4MiB flash 
-mtd5: 00030000 00010000 "0:SBL3-> SPI 4MiB flash +mtd5: 00030000 00010000 "0:sbl3" SPI 4MiB flash 
-mtd6: 00010000 00010000 "0:DDRCONFIG-> SPI 4MiB flash +mtd6: 00010000 00010000 "0:ddrconfig" SPI 4MiB flash 
-mtd7: 00010000 00010000 "0:SSD-> SPI 4MiB flash +mtd7: 00010000 00010000 "0:ssd" SPI 4MiB flash 
-mtd8: 00030000 00010000 "0:TZ-> SPI 4MiB flash +mtd8: 00030000 00010000 "0:tz" SPI 4MiB flash 
-mtd9: 00020000 00010000 "0:RPM-> SPI 4MiB flash +mtd9: 00020000 00010000 "0:rpm" SPI 4MiB flash 
-mtd10: 00040000 00010000 "0:OLDAPPSBL-> SPI 4MiB flash +mtd10: 00040000 00010000 "0:oldappsbl" SPI 4MiB flash 
-mtd11: 00040000 00010000 "0:APPSBLENV-> SPI 4MiB flash +mtd11: 00040000 00010000 "0:appsblenv" SPI 4MiB flash 
-mtd12: 00020000 00010000 "0:ART" -> SPI 4MiB flash +mtd12: 00020000 00010000 "0:ART" SPI 4MiB flash 
-mtd13: 00050000 00010000 "0:APPSBL-> SPI 4MiB flash +mtd13: 00050000 00010000 "0:uboot" SPI 4MiB flash 
-mtd14: 00020000 00010000 "0:NSS1-> SPI 4MiB flash +mtd14: 00020000 00010000 "0:oldnss1" SPI 4MiB flash 
-mtd15: 00020000 00010000 "0:NVRAM-> SPI 4MiB flash +mtd15: 00020000 00010000 "0:nvram" SPI 4MiB flash 
-mtd16: 001e0000 00010000 "0:HLOS-> SPI 4MiB flash - another linux kernel -> not used, kernel loads initially directly from the NAND UBI volume 0(ubi/rootfs) which is OS mapped under the mtd0 -> /dev/ubi0+mtd16: 001e0000 00010000 "0:oldkernel" SPI 4MiB flash - another linux kernel -> not used, kernel loads initially directly from the NAND UBI volume 0(ubi/rootfs) which is OS mapped under the mtd0 -> /dev/ubi0
 /dev/ubi0_0 - linux kernel /dev/ubi0_0 - linux kernel
 /dev/ubi0_1 - rootfs squashfs /dev/ubi0_1 - rootfs squashfs
Line 1751: Line 1722:
 <WRAP bootlog> <WRAP bootlog>
 <nowiki> <nowiki>
 +U-Boot 2012.07-svn65 [local,local] (Sep 11 2015 - 09:46:52)
 +
 +CyberTan U-Boot Version: v1.0
 +
 +smem ram ptable found: ver: 0 len: 5
 +DRAM:  491 MiB
 +NAND:  SF: Detected MX25U3235F with page size 64 KiB, total 4 MiB
 +ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x400000
 +132 MiB
 +In:    serial
 +Out:   serial
 +Err:   serial
 +cdp: get part failed for rootfs
 +Net:   MAC1 addr:0:3:7f:ba:db:1
 +athrs17_reg_init: complete
 +athrs17_vlan_config ...done
 +S17 inits done
 +MAC2 addr:0:3:7f:ba:db:2
 +eth0
 +Warning: eth0 MAC addresses don't match:
 +Address in SROM is         00:03:7f:ba:db:01
 +Address in environment is  c0:56:27:1e:12:cc
 +, eth1
 +Warning: eth1 MAC addresses don't match:
 +Address in SROM is         00:03:7f:ba:db:02
 +Address in environment is  00:06:3b:01:41:01
 +
 +Hit any key to stop autoboot:  0
 +Device 1: nand1... is now current device
 +Creating 1 MTD partitions on "nand0":
 +0x000000000000-0x000004000000 : "mtd=0"
 +UBI: attaching mtd2 to ubi0
 +UBI: physical eraseblock size:   131072 bytes (128 KiB)
 +UBI: logical eraseblock size:    126976 bytes
 +UBI: smallest flash I/O unit:    2048
 +UBI: VID header offset:          2048 (aligned 2048)
 +UBI: data offset:                4096
 +UBI: attached mtd2 to ubi0
 +UBI: MTD device name:            "mtd=0"
 +UBI: MTD device size:            64 MiB
 +UBI: number of good PEBs:        512
 +UBI: number of bad PEBs:         0
 +UBI: max. allowed volumes:       128
 +UBI: wear-leveling threshold:    4096
 +UBI: number of internal volumes: 1
 +UBI: number of user volumes:     3
 +UBI: available PEBs:             15
 +UBI: total number of reserved PEBs: 497
 +UBI: number of PEBs reserved for bad PEB handling: 5
 +UBI: max/mean erase counter: 2/1
 +Read 0 bytes from volume kernel to 44000000
 +No size specified -> Using max size (3555328)
 +   Image Name:   ARM OpenWrt Linux-6.6.34
 +   Image Type:   ARM Linux Kernel Image (uncompressed)
 +   Data Size:    3487558 Bytes = 3.3 MiB
 +   Load Address: 42208000
 +   Entry Point:  42208000
 +   Verifying Checksum ... OK
 +   Loading Kernel Image ... OK
 +OK
 +Setting up atags for msm partition: rootfs
 +
 +device nand0 <nand0>, # parts = 1
 + #: name                size            offset          mask_flags
 + 0: fs                  0x04000000      0x00000000      0
 +
 +active partition: nand0,0 - (fs) 0x04000000 @ 0x00000000
 +
 +defaults:
 +mtdids  : none
 +mtdparts: none
 +Using machid 0x1260 from environment
 +
 +Starting kernel ...
 +
 [    0.000000] Booting Linux on physical CPU 0x0 [    0.000000] Booting Linux on physical CPU 0x0
-[    0.000000] Linux version 5.4.50 (openwrt@tchome) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13773-a6160de3f7)) #0 SMP Fri Jul 10 23:09:18 2020+[    0.000000] Linux version 6.6.34 (root@a070fcda8c75) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 13.3.0 r26618-57d23ce28a13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Jun 20 11:28:40 2024
 [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
 [    0.000000] CPU: div instructions available: patching division code [    0.000000] CPU: div instructions available: patching division code
 [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
-[    0.000000] OF: fdt: Machine model: Linksys EA8300 V1 WiFi Router+[    0.000000] OF: fdt: Machine model: Linksys E8350 V1 WiFi Router
 [    0.000000] Memory policy: Data cache writealloc [    0.000000] Memory policy: Data cache writealloc
-[    0.000000] On node 0 totalpages122880 +[    0.000000] OFreserved mem: 0x40000000..0x40ffffff (16384 KiB) nomap non-reusable nss@40000000 
-[    0.000000]   Normal zone960 pages used for memmap +[    0.000000] OFreserved mem: 0x41000000..0x411fffff (2048 KiB) nomap non-reusable smem@41000000 
-[    0.000000]   Normal zone0 pages reserved +[    0.000000] OF: reserved mem: 0x41200000..0x414fffff (3072 KiB) nomap non-reusable rsvd@41200000 
-[    0.000000]   Normal zone: 122880 pages, LIFO batch:31 +[    0.000000] Zone ranges: 
-[    0.000000] percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440 +[    0.000000]   Normal   [mem 0x0000000042000000-0x000000005fffffff] 
-[    0.000000] pcpu-alloc: s29900 r8192 d23348 u61440 alloc=15*4096 +[    0.000000]   HighMem  empty 
-[    0.000000] pcpu-alloc: [0] 0 [0 +[    0.000000] Movable zone start for each node 
-[    0.000000] Built 1 zonelists, mobility grouping on Total pages121920 +[    0.000000] Early memory node ranges 
-[    0.000000] Kernel command line: +   0.000000]   node   0[mem 0x0000000042000000-0x000000005fffffff
 +[    0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff] 
 +[    0.000000] percpuEmbedded 13 pages/cpu s21076 r8192 d23980 u53248 
 +[    0.000000] Kernel command line:
 [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs
 [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
 [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
 [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
-[    0.000000] Memory: 478444K/491520K available (5712K kernel code, 165K rwdata, 884K rodata, 1024K init, 222K bss, 13076K reserved, 0K cma-reserved, 0K highmem)+[    0.000000] Memory: 474408K/491520K available (7372K kernel code, 624K rwdata, 2016K rodata, 1024K init, 239K bss, 17112K reserved, 0K cma-reserved, 0K highmem)
 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 [    0.000000] rcu: Hierarchical RCU implementation. [    0.000000] rcu: Hierarchical RCU implementation.
 +[    0.000000]  Tracing variant of Tasks RCU enabled.
 [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
 [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
 +[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
 [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
-[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns +[    0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns 
-[    0.000021] Switching to timer-based delay loop, resolution 160ns +[    0.000022] Switching to timer-based delay loop, resolution 160ns 
-[    0.000212] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) +[    0.000316] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) 
-[    0.000232] pid_max: default: 32768 minimum: 301 +[    0.000343] CPU: Testing write buffer coherency: ok 
-[    0.000379] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) +[    0.000396] pid_max: default: 32768 minimum: 301 
-[    0.000398] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) +[    0.009576] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
-[    0.001099CPUTesting write buffer coherencyok +[    0.009601] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
-[    0.002096] Setting up static identity map for 0x42300000 - 0x42300060 +[    0.018085qcom_scmconventionsmc legacy 
-[    0.002254] rcu: Hierarchical SRCU implementation. +[    0.019698] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. 
-[    0.002682] smp: Bringing up secondary CPUs ... +[    0.019944] Setting up static identity map for 0x42300000 - 0x42300060 
-[    0.004484] smp: Brought up 1 node, 2 CPUs +[    0.020192] rcu: Hierarchical SRCU implementation. 
-[    0.004501] SMP: Total of 2 processors activated (25.00 BogoMIPS). +[    0.020203] rcu:     Max phase no-delay instances is 1000. 
-[    0.004511] CPU: All CPU(s) started in SVC mode. +[    0.020980] smp: Bringing up secondary CPUs ... 
-[    0.014143] random: get_random_u32 called from 0xc0541e44 with crng_init=0 +[    0.023152] smp: Brought up 1 node, 2 CPUs 
-[    0.014199] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 +[    0.023171] SMP: Total of 2 processors activated (25.00 BogoMIPS). 
-[    0.014364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +[    0.023185] CPU: All CPU(s) started in SVC mode. 
-[    0.014392] futex hash table entries: 512 (order: 3, 32768 bytes, linear) +[    0.039780] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 
-[    0.014501] pinctrl core: initialized pinctrl subsystem +[    0.040023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
-[    0.015616] NET: Registered protocol family 16 +[    0.040060] futex hash table entries: 512 (order: 3, 32768 bytes, linear) 
-[    0.015895] DMA: preallocated 256 KiB pool for atomic coherent allocations +[    0.044945] pinctrl core: initialized pinctrl subsystem 
-[    0.017253] cpuidle: using governor ladder +[    0.047795] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
-[    0.017315] cpuidle: using governor menu +[    0.048216] DMA: preallocated 256 KiB pool for atomic coherent allocations 
-[    0.047968] usbcore: registered new interface driver usbfs +[    0.050044] thermal_sys: Registered thermal governor 'step_wise' 
-[    0.048060] usbcore: registered new interface driver hub +[    0.050733] cpuidle: using governor ladder 
-[    0.048148] usbcore: registered new device driver usb +[    0.050808] cpuidle: using governor menu 
-[    0.048204] pps_core: LinuxPPS API ver. 1 registered +[    0.087374] usbcore: registered new interface driver usbfs 
-[    0.048217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> +[    0.087445] usbcore: registered new interface driver hub 
-[    0.048250] PTP clock support registered +[    0.087517] usbcore: registered new device driver usb 
-[    0.049978] clocksource: Switched to clocksource dg_timer +[    0.087588] pps_core: LinuxPPS API ver. 1 registered 
-[    0.050788thermal_sys: Registered thermal governor 'step_wise' +[    0.087600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 
-[    0.053364NETRegistered protocol family 2 +[    0.087631] PTP clock support registered 
-[    0.053906] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) +[    0.091118] clocksource: Switched to clocksource dg_timer 
-[    0.053938] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) +[    0.101987NET: Registered PF_INET protocol family 
-[    0.053982] TCP bind hash table entries: 4096 (order: 332768 bytes, linear) +[    0.102216IP idents hash table entries8192 (order: 4, 65536 bytes, linear) 
-[    0.054037] TCP: Hash tables configured (established 4096 bind 4096) +[    0.103551] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
-[    0.054137] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) +[    0.103668] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
-[    0.054165] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) +[    0.103702] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) 
-[    0.054369] NET: Registered protocol family 1 +[    0.103738] TCP bind hash table entries: 4096 (order: 465536 bytes, linear) 
-[    0.054415] PCI: CLS 0 bytes, default 64 +[    0.103819] TCP: Hash tables configured (established 4096 bind 4096) 
-[    0.055655] workingset: timestamp_bits=30 max_order=17 bucket_order=0 +[    0.103940] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
-[    0.061524] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[    0.103972] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
-[    0.061539] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. +[    0.104711] NET: Registered PF_UNIX/PF_LOCAL protocol family 
-[    0.100925] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator +[    0.104775] PCI: CLS 0 bytes, default 64 
-[    0.101051] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator +[    0.107003] workingset: timestamp_bits=14 max_order=17 bucket_order=3 
-[    0.101175] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator +[    0.110592] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
-[    0.101442qcom-pcie 1b500000.pcihost bridge /soc/pci@1b500000 ranges: +[    0.110623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
-[    0.101466qcom-pcie 1b500000.pciParsing ranges property... +[    0.312139] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator 
-[    0.101516] qcom-pcie 1b500000.pci:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000 +[    0.312416] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator 
-[    0.101557] qcom-pcie 1b500000.pci:   MEM 0x08000000..0x0fdfffff -> 0x08000000 +[    0.312518] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator 
-[    0.325878] qcom-pcie 1b500000.pci: Link up +[    0.312779krait-cc soc:clock-controller: CPU0 800000 KHz 
-[    0.326057] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 +[    0.312812krait-cc soc:clock-controller: CPU1 @ Undefined rateForcing new rate
-[    0.326082] pci_bus 0000:00: root bus resource [bus 00-ff] +[    0.312951] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges: 
-[    0.326103pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff]) +[    0.313054] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x0000000000 
-[    0.326120] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] +[    0.313096] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000 
-[    0.326136] pci_bus 0000:00: scanning bus +[    0.313145krait-cc soc:clock-controllerCPU1 @ 384000 KHz 
-[    0.326184pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000 +[    0.313170krait-cc soc:clock-controllerL2 @ Undefined rate. Forcing new rate
-[    0.326357pci 0000:00:00.0: supports D1 +[    0.313425krait-cc soc:clock-controllerL2 @ 384000 KHz 
-[    0.326372] pci 0000:00:00.0: PME# supported from D0 D1 D3hot +[    0.314470qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator 
-[    0.326392] pci 0000:00:00.0: PME# disabled +[    0.314688qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator 
-[    0.329944pci_bus 0000:00: fixups for bus +[    0.314946qcom-pcie 1b700000.pci: supply vdda_refclk not foundusing dummy regulator 
-[    0.329967] PCI: bus0: Fast back to back transfers disabled +[    0.315294qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges
-[    0.329987] pci 0000:00:00.0: scanning [bus 01-ff] behind bridgepass 0 +[    0.315367qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0000000000 
-[    0.330127pci_bus 0000:01: scanning bus +[    0.315404qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000 
-[    0.330423] pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000 +[    0.322157gsbi 16300000.gsbino matching TCSR 
-[    0.330710] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff pref] +[    0.322189gsbi 16300000.gsbiGSBI port protocol: 6 crci: 0 
-[    0.330889pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff pref] +[    0.323835gsbi 1a200000.gsbino matching TCSR 
-[    0.330987] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x0000ffff pref] +[    0.323861gsbi 1a200000.gsbiGSBI port protocol3 crci: 0 
-[    0.331953pci 0000:01:00.0supports D1 +[    0.326443tcsr 1a400000.sysconsetting usb port select 3 
-[    0.331967pci 0000:01:00.0: PME# supported from D0 D1 D3hot +[    0.326852Serial8250/16550 driver2 ports, IRQ sharing disabled 
-[    0.332013pci 0000:01:00.0PME# disabled +[    0.328763msm_serial 16340000.serialmsm_serialdetected port #
-[    0.332271pci 0000:01:00.02.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) +[    0.328839msm_serial 16340000.serialuartclk = 7372800 
-[    0.335773pci_bus 0000:01: fixups for bus +[    0.32937116340000.serialttyMSM0 at MMIO 0x16340000 (irq = 29, base_baud = 460800) is a MSM 
-[    0.335849] PCIbus1: Fast back to back transfers disabled +[    0.329430msm_serialconsole setup on port #
-[    0.335865] pci_bus 0000:01: bus scan returning with max=01 +[    0.329538printkconsole [ttyMSM0enabled 
-[    0.335884pci 0000:00:00.0: scanning [bus 01-ff] behind bridgepass 1 +[    0.440648msm_serialdriver initialized 
-[    0.335903pci_bus 0000:00: bus scan returning with max=ff +[    0.446471] qcom-pcie 1b700000.pci: iATU: unroll F8 ob, 8 ib, align 4K, limit 4G 
-[    0.335938] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff] +[    0.551522] qcom-pcie 1b700000.pci: PCIe Gen.1 x1 link up 
-[    0.335972pci 0000:01:00.0BAR 0: assigned [mem 0x08000000-0x0800ffff pref] +[    0.555120] qcom-pcie 1b500000.pci: iATU: unroll F8 ob, 8 ib, align 4K, limit 4G 
-[    0.336028pci 0000:01:00.0BAR 2: assigned [mem 0x08010000-0x0801ffff pref] +[    0.561528] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 
-[    0.336082pci 0000:01:00.0: BAR 3: assigned [mem 0x08020000-0x0802ffff pref] +[    0.583253loopmodule loaded 
-[    0.336137pci 0000:00:00.0: PCI bridge to [bus 01-ff+[    0.587918pci_bus 0001:00: root bus resource [bus 00-ff
-[    0.336163pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff] +[    0.628494nanddevice found, Manufacturer ID0x01, Chip ID: 0xa1 
-[    0.336369] pcieport 0000:00:00.0: assign IRQ: got 35 +[    0.632667] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff]) 
-[    0.336893] pcieport 0000:00:00.0: AER: enabled with IRQ 36 +[    0.638714] nand: AMD/Spansion S34MS01G2 
-[    0.337490] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not foundusing dummy regulator +[    0.643581] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] 
-[    0.337611] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator +[    0.651226nand128 MiB, SLC, erase size128 KiB, page size: 2048, OOB size: 64 
-[    0.337726] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not foundusing dummy regulator +[    0.661152] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 
-[    0.337995] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges+[    0.667876] 2 fixed-partitions partitions found on MTD device qcom_nand.0 
-[    0.338023qcom-pcie 1b700000.pciParsing ranges property... +[    0.672956] pci 0001:00:00.0: supports D1 
-[    0.338065qcom-pcie 1b700000.pci   IO 0x31e00000..0x31efffff -> 0x31e00000 +[    0.678658Creating 2 MTD partitions on "qcom_nand.0"
-   0.338108] qcom-pcie 1b700000.pci:   MEM 0x2e000000..0x31dfffff -> 0x2e000000 +[    0.685659] pci 0001:00:00.0: PME# supported from D0 D1 D3hot 
-[    0.567397qcom-pcie 1b700000.pci: Link up +[    0.6918500x000000000000-0x000004000000 "ubi" 
-[    0.567561qcom-pcie 1b700000.pciPCI host bridge to bus 0001:00 +[    1.124515] PCI: bus0: Fast back to back transfers disabled 
-[    0.567581] pci_bus 0001:00: root bus resource [bus 00-ff+[    1.125202] pci 0001:01:00.0: [168c:003c] type 00 class 0x028000 
-[    0.567596] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] +[    1.129742] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] 
-[    0.567609pci_bus 0001:00scanning bus +[    1.136354] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] 
-[    0.567651] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000 +[    1.143617] pci 0001:01:00.0: supports D1 D2 
-[    0.567801] pci 0001:00:00.0: supports D1 +[    1.149077] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
-[    0.567815pci 0001:00:00.0: PME# supported from D0 D1 D3hot +[    1.155085] PCI: bus1: Fast back to back transfers disabled 
-[    0.567833] pci 0001:00:00.0: PME# disabled +[    1.159798] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e2fffff] 
-[    0.571432pci_bus 0001:00: fixups for bus +[    1.165312] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] 
-[    0.571453] PCI: bus0: Fast back to back transfers disabled +[    1.172392] pci 0001:01:00.0: BAR 6: assigned [mem 0x2e200000-0x2e20ffff pref] 
-[    0.571471] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 +[    1.179293] pci 0001:00:00.0: PCI bridge to [bus 01-ff] 
-[    0.571591] pci_bus 0001:01: scanning bus +[    1.186704] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e2fffff] 
-[    0.571780] pci 0001:01:00.0: [168c:003c] type 00 class 0x028000 +[    1.193429] qcom-pcie 1b500000.pci: PCIe Gen.1 x1 link up 
-[    0.572139] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] +[    1.198887] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 
-[    0.572556] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] +[    1.204102pci_bus 0000:00: root bus resource [bus 00-ff] 
-[    0.573388] pci 0001:01:00.0: supports D1 D2 +[    1.210147pci_bus 0000:00root bus resource [io  0x0000-0xffff] 
-[    0.573403] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold +[    1.215656pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] 
-[    0.573449] pci 0001:01:00.0: PME# disabled +[    1.221916] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 
-[    0.577166] pci_bus 0001:01: fixups for bus +[    1.228782] pci 0000:00:00.0: supports D1 
-[    0.577243] PCI: bus1: Fast back to back transfers disabled +[    1.234825] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
-[    0.577259] pci_bus 0001:01: bus scan returning with max=01 +[    1.243798PCIbus0: Fast back to back transfers disabled 
-[    0.577276] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 +[    1.245033pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000 
-[    0.577292] pci_bus 0001:00: bus scan returning with max=ff +[    1.250043pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff pref
-[    0.577318] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e2fffff] +[    1.256372] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff pref
-[    0.577342] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] +[    1.262949pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x0000ffff pref
-[    0.577480] pci 0001:01:00.0: BAR 6: assigned [mem 0x2e200000-0x2e20ffff pref] +[    1.270818pci 0000:01:00.0: supports D1 
-[    0.577498] pci 0001:00:00.0: PCI bridge to [bus 01-ff] +[    1.276167pci 0000:01:00.0: PME# supported from D0 D1 D3hot 
-[    0.577518] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e2fffff] +[    1.280561pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidthlimited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) 
-[    0.577709] pcieport 0001:00:00.0: assign IRQ: got 37 +[    1.286736PCIbus1Fast back to back transfers disabled 
-[    0.578367] pcieport 0001:00:00.0: AER: enabled with IRQ 38 +[    1.300678pci 0000:00:00.0BAR 8: assigned [mem 0x08000000-0x080fffff] 
-[    0.578964] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda not found, using dummy regulator +[    1.306001pci 0000:01:00.0BAR 0: assigned [mem 0x08000000-0x0800ffff pref] 
-[    0.579086] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_phy not found, using dummy regulator +[    1.313053pci 0000:01:00.0: BAR 2: assigned [mem 0x08010000-0x0801ffff pref
-[    0.579188qcom-pcie 1b900000.pci1b900000.pci supply vdda_refclk not found, using dummy regulator +[    1.320043pci 0000:01:00.0BAR 3: assigned [mem 0x08020000-0x0802ffff pref] 
-[    0.579446qcom-pcie 1b900000.pcihost bridge /soc/pci@1b900000 ranges+[    1.327346pci 0000:00:00.0PCI bridge to [bus 01-ff
-[    0.579470qcom-pcie 1b900000.pciParsing ranges property... +[    1.334486pci 0000:00:00.0  bridge window [mem 0x08000000-0x080fffff] 
-[    0.579512qcom-pcie 1b900000.pci:    IO 0x35e00000..0x35efffff -> 0x35e00000 +[    1.340825pcieport 0001:00:00.0: AER: enabled with IRQ 33 
-[    0.579548qcom-pcie 1b900000.pci:   MEM 0x32000000..0x35dfffff -> 0x32000000 +[    1.348868pcieport 0000:00:00.0: AER: enabled with IRQ 35 
-[    1.729990qcom-pcie 1b900000.pci: Phy link never came up +[    1.4922550x000004000000-0x000008000000 : "extra
-[    1.731998qcom-pcie 1b900000.pcicannot initialize host +[    1.676428] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 
-[    1.732373qcom-pcieprobe of 1b900000.pci failed with error -110 +[    1.676676] m25p80@0 enforce active low on GPIO handle 
-[    1.734653L2 @ QSB rateForcing new rate. +[    1.686676] spi-nor spi0.0: mx25u3235f (4096 Kbytes) 
-   1.734881L2 @ 384000 KHz +[    1.687931] 15 fixed-partitions partitions found on MTD device spi0.0 
-[    1.735064CPU0 @ 800000 KHz +[    1.692890] Creating 15 MTD partitions on "spi0.0": 
-[    1.735078CPU1 @ QSB rate. Forcing new rate. +[    1.699071] 0x000000000000-0x000000010000 : "0:sbl1
-   1.735207CPU1 @ 384000 KHz +[    1.704930] 0x000000010000-0x000000030000 : "0:mibib
-[    1.738963gsbi 16300000.gsbiGSBI port protocol: 6 crci: 0 +[    1.709892] 0x000000030000-0x000000050000 : "0:sbl2
-[    1.739660gsbi 1a200000.gsbiGSBI port protocol: 3 crci: 0 +[    1.714961] 0x000000050000-0x000000080000 : "0:sbl3
-[    1.741208Serial8250/16550 driver, 2 ports, IRQ sharing disabled +[    1.719846] 0x000000080000-0x000000090000 : "0:ddrconfig
-[    1.742019msm_serial 16340000.serialmsm_serialdetected port #0 +[    1.724920] 0x000000090000-0x0000000a0000 : "0:ssd
-[    1.742072msm_serial 16340000.serialuartclk = 7372800 +[    1.730128] 0x0000000a0000-0x0000000d0000 : "0:tz
-[    1.74214316340000.serialttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM +[    1.734937] 0x0000000d0000-0x0000000f0000 : "0:rpm
-[    1.742180msm_serialconsole setup on port #0 +[    1.739666] 0x0000000f0000-0x000000130000 : "0:oldappsbl
-[    2.630565] printkconsole [ttyMSM0enabled +[    1.744591] 0x000000130000-0x000000170000 : "0:appsblenv
-[    2.635571msm_serialdriver initialized +[    1.750001] 0x000000170000-0x000000190000 : "0:ART" 
-[    2.644505] loopmodule loaded +[    1.755524] 0x000000190000-0x0000001e0000 : "0:uboot
-[    2.645841nanddevice found, Manufacturer ID0x2c, Chip ID0xa1 +[    1.760142] 0x0000001e0000-0x000000200000 : "0:oldnss1
-   2.646624nand: Micron MT29F1G08ABBDAH4 +[    1.765359] 0x000000200000-0x000000220000 : "0:nvram
-[    2.653323nand128 MiB, SLC, erase size128 KiB, page size2048, OOB size: 64 +[    1.770345] 0x000000220000-0x000000400000 : "0:oldkernel
-[    2.6571731 fixed-partitions partitions found on MTD device qcom_nand.0 +[    1.817014] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found 
-[    2.664686Creating 1 MTD partitions on "qcom_nand.0"+[    1.817088] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found 
-[    2.6715350x000000000000-0x000008000000 : "ubi+[    1.823683] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock 
-[    2.684598] random: fast init done +[    1.830565] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37 
-[    3.184954] random: crng init done +[    1.836260] ipq806x-gmac-dwmac 37200000.ethernet:    DWMAC1000 
-[    4.135759] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 +[    1.843665] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported 
-[    4.141447] spi-nor spi0.0: mx25u3235f (4096 Kbytes) +[    1.849380] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported 
-[    4.141976] 15 qcom-smem partitions found on MTD device spi0.0 +[    1.857219] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2 
-[    4.146922] Creating 15 MTD partitions on "spi0.0": +[    1.865082] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported 
-[    4.152676] 0x000000000000-0x000000010000 : "0:SBL1+[    1.870817] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported 
-[    4.158782] 0x000000010000-0x000000030000 : "0:MIBIB+[    1.878303] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors 
-[    4.163927] 0x000000030000-0x000000050000 : "0:SBL2+[    1.885033] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors 
-[    4.168762] 0x000000050000-0x000000080000 : "0:SBL3+[    1.892595] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled 
-[    4.173898] 0x000000080000-0x000000090000 : "0:DDRCONFIG+[    1.899548] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer 
-[    4.178766] 0x000000090000-0x0000000a0000 : "0:SSD+[    1.905820] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address 12:a1:0f:ab:11:1c 
-[    4.184135] 0x0000000a0000-0x0000000d0000 : "0:TZ+[    1.917781] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found 
-[    4.188722] 0x0000000d0000-0x0000000f0000 : "0:RPM+[    1.922219] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found 
-[    4.193716] 0x0000000f0000-0x000000130000 : "0:OLDAPPSBL+[    1.929683] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock 
-[    4.198378] 0x000000130000-0x000000170000 : "0:APPSBLENV+[    1.936411] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37 
-[    4.204039] 0x000000170000-0x000000190000 : "0:ART" +[    1.942392] ipq806x-gmac-dwmac 37400000.ethernet:    DWMAC1000 
-[    4.209328] 0x000000190000-0x0000001e0000 : "0:APPSBL+[    1.949722] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported 
-[    4.214139] 0x0000001e0000-0x000000200000 : "0:NSS1+[    1.955687] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported 
-[    4.219204] 0x000000200000-0x000000220000 : "0:NVRAM+[    1.963366] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2 
-[    4.224454] 0x000000220000-0x000000400000 : "0:HLOS+[    1.971161] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported 
-[    4.231406] libphy: ipq8064_mdio_bus: probed +[    1.977067] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported 
-[    4.283114] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii +[    1.984439] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors 
-[    5.384612] libphy: Fixed MDIO Bus: probed +[    1.991131] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors 
-[    5.385625] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found +[    1.998778] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled 
-[    5.387620] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found +[    2.005776] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer 
-[    5.395255] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock +[    2.011973] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 3a:b8:e0:99:1b:28 
-[    5.402184] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37 +[    2.023893i2c_dev: i2c /dev entries driver 
-[    5.407763] ipq806x-gmac-dwmac 37200000.ethernet:    DWMAC1000 +[    2.034214] sdhci: Secure Digital Host Controller Interface driver 
-[    5.415335] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported +[    2.034267] sdhci: Copyright(c) Pierre Ossman 
-[    5.421129] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported +[    2.039307] sdhci-pltfm: SDHCI platform and OF driver helper 
-[    5.428763] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2 +[    2.048959] NET: Registered PF_INET6 protocol family 
-[    5.436763] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported +[    2.051990] Segment Routing with IPv6 
-[    5.442559] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported +[    2.054453] In-situ OAM (IOAM) with IPv6 
-[    5.449858] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors +[    2.058072] NET: Registered PF_PACKET protocol family 
-[    5.456710] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors +[    2.062498] 8021q: 802.1Q VLAN Support v1.8 
-[    5.464271] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled +[    2.066964] Registering SWP/SWPB emulation handler 
-[    5.471299] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer +[    2.116320] qcom_rpm 108000.rpm: RPM firmware 3.0.16777338 
-[    5.477390] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address fa:49:36:39:6b:57 +[    2.129372] s1a: Bringing 0uV into 1050000-1050000uV 
-[    5.487500] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found +[    2.129809s1b: Bringing 0uV into 1050000-1050000uV 
-[    5.493894] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found +[    2.133854s2aBringing 0uV into 800000-800000uV 
-[    5.501375] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock +[    2.138724s2b: Bringing 0uV into 800000-800000uV 
-[    5.507868] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37 +[    2.351107qca8k 37000000.mdio-mii:10: configuring for fixed/rgmii link mode 
-[    5.514051] ipq806x-gmac-dwmac 37400000.ethernet:    DWMAC1000 +[    2.360769qca8k 37000000.mdio-mii:10: Link is Up 1Gbps/Full - flow control off 
-[    5.521473] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported +[    2.366506qca8k 37000000.mdio-mii:10: configuring for fixed/sgmii link mode 
-[    5.527200] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported +[    2.379190qca8k 37000000.mdio-mii:10: Link is Up 1Gbps/Full - flow control off 
-[    5.535043] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2 +[    2.485978qca8k 37000000.mdio-mii:10 lan1 (uninitialized): PHY [qca8k-0.0:00] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.542901] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported +[    2.605844qca8k 37000000.mdio-mii:10 lan2 (uninitialized): PHY [qca8k-0.0:01] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.548640] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported +[    2.715936qca8k 37000000.mdio-mii:10 lan3 (uninitialized)PHY [qca8k-0.0:02] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.556115] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors +[    2.825929qca8k 37000000.mdio-mii:10 lan4 (uninitialized)PHY [qca8k-0.0:03] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL
-[    5.562894] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors +[    2.935925qca8k 37000000.mdio-mii:10 wan (uninitialized)PHY [qca8k-0.0:04] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.570423] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled +[    2.937293] ipq806x-gmac-dwmac 37200000.ethernet eth0entered promiscuous mode 
-[    5.577370] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer +[    2.947340ipq806x-gmac-dwmac 37400000.ethernet eth1entered promiscuous mode 
-[    5.583649] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address b6:c3:1d:f8:f4:4b +[    2.954195DSAtree 0 setup 
-[    5.593817] i2c /dev entries driver +[    2.971505thermal thermal_zone0failed to read out thermal zone (-110
-[    5.603512] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations +[    2.988039] UBI: auto-attach mtd0 
-[    5.603843] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations +[    2.988067] ubi0: attaching mtd0 
-[    5.611712] sdhci: Secure Digital Host Controller Interface driver +[    3.241488randomcrng init done 
-[    5.617904] sdhci: Copyright(c) Pierre Ossman +[    3.997043] ubi0: scanning is finished 
-[    5.624251] sdhci-pltfm: SDHCI platform and OF driver helper +[    4.016892] ubi0: attached mtd0 (name "ubi", size 64 MiB) 
-[    5.632107] NET: Registered protocol family 10 +[    4.016918] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
-[    5.637370] Segment Routing with IPv6 +[    4.021268] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
-[    5.638715] NET: Registered protocol family 17 +[    4.028095] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
-[    5.643581] 8021q: 802.1Q VLAN Support v1.8 +[    4.034959] ubi0: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0 
-[    5.646686] Registering SWP/SWPB emulation handler +[    4.041737] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 
-[    5.683177] qcom_rpm 108000.rpm: RPM firmware 3.0.16777338 +[    4.047917] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1718782863 
-[    5.708566] s1a: supplied by regulator-dummy +[    4.055014] ubi0: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 20 
-[    5.708705s1a: Bringing 0uV into 1050000-1050000uV +[    4.064356] ubi0: background thread "ubi_bgt0d" started, PID 71 
-[    5.712506s1bsupplied by regulator-dummy +[    4.065593] block ubiblock0_1: created from ubi0:1(rootfs) 
-[    5.716958s1b: Bringing 0uV into 1050000-1050000uV +[    4.079079ubiblock: device ubiblock0_1 (rootfsset to be root fi▒[    4.097149] VFS: Mounted root (squashfs filesystem) readonly on device 254:0
-[    5.721635s2a: supplied by regulator-dummy +[    4.097815] Freeing unused kernel image (initmem) memory: 1024K 
-[    5.726150s2aBringing 0uV into 800000-800000uV +[    4.103435] Run /sbin/init as init process 
-[    5.730838s2b: supplied by regulator-dummy +[    4.535346] init: Console is alive 
-[    5.735025s2bBringing 0uV into 800000-800000uV +[    4.535512] init: - watchdog - 
-[    5.741788Speed bin: 0 +   5.921881] kmodloader: loading kernel modules from /etc/modules-boot.d/
-[    5.743933PVS bin2 +[    5.970230gpio_button_hotplugloading out-of-tree module taints kernel
-[    5.748893core_opp_supported_by_regulatorsOPP minuV995000 maxuV: 995000, not supported by regulator +[    5.977345] SCSI subsystem initialized 
-[    5.748951cpu cpu0_opp_addOPP not supported by regulators (800000000+   6.107489] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
-[    5.759853cpufreqcpufreq_onlineCPU0Running at unlisted freq800000 KHz +   6.107537] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 
-[    5.765725cpufreq: cpufreq_onlineCPU0: Unlisted initial frequency changed to: 1000000 KHz +   6.112109] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002000010 
-[    5.774260core_opp_supported_by_regulators: OPP minuV: 995000 maxuV: 995000, not supported by regulator +   6.119459] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0x10000000 
-[    5.781459cpu cpu1_opp_add: OPP not supported by regulators (800000000+   6.129038] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
-[    5.798718] UBI: auto-attach mtd0 +   6.134772] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 
-[    5.798742] ubi0: default fastmap pool size: 50 +   6.140261] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed 
-[    5.801415ubi0default fastmap WL pool size: 25 +   6.148379] hub 1-0:1.0: USB hub found 
-[    5.805652] ubi0: attaching mtd0 +[    6.154502] hub 1-0:1.0: 1 port detected 
-[    7.388215] ubi0: scanning is finished +[    6.158465] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    7.410482] ubi0: attached mtd0 (name "ubi", size 128 MiB) +   6.163528] hub 2-0:1.0: USB hub found 
-[    7.410502] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes +   6.170311] hub 2-0:1.0: 1 port detected 
-[    7.414850] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 +   6.174228] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    7.421788] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 +   6.177936] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 
-[    7.428566] ubi0: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0 +   6.183409] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002000010 
-[    7.435411] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 +   6.190808] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0x11000000 
-[    7.441652] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1594422558 +   6.200364] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    7.448710] ubi0: available PEBs: 495, total reserved PEBs: 529, PEBs reserved for bad PEB handling: 20 +   6.206116] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 
-[    7.458886] mtd: device 17 (rootfs) set to be root filesystem +   6.211673] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed 
-[    7.459038] ubi0: background thread "ubi_bgt0d" started, PID 64 +   6.219630] hub 3-0:1.0: USB hub found 
-[    7.468717] block ubiblock0_1: created from ubi0:1(rootfs) +[    6.225858] hub 3-0:1.0: 1 port detected 
-[    7.478785hctosysunable to open rtc device (rtc0) +[    6.229787] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    7.498199] VFS: Mounted root (squashfs filesystem) readonly on device 31:17+   6.234522] hub 4-0:1.0: USB hub found 
-[    7.500513] Freeing unused kernel memory: 1024K +   6.241716] hub 4-0:1.0: 1 port detected 
-[    7.532254] Run /sbin/init as init process +   6.249014] usbcore: registered new interface driver usb-storage 
-[    8.510987] init: Console is alive +   6.249468] kmodloader: done loading kernel modules from /etc/modules-boot.d/
-[    8.511114] init: - watchdog - +   6.261898] init: - preinit - 
-  11.976623] kmodloader: loading kernel modules from /etc/modules-boot.d/+   8.062010] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 
-  12.009925] raid6: using algorithm neonx8 gen() 0 MB/s +[    8.062816] dwmac1000: Master AXI performs any burst length 
-[   12.009956] raid6: .... xor() 0 MB/s, rmw enabled +   8.069173] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found 
-[   12.014061] raid6: using neon recovery algorithm +   8.084570] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported 
-[   12.019966] xor: measuring software checksum speed +   8.084714] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock 
-[   12.120350]    arm4regs  :  1061.600 MB/sec +   8.098699] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode 
-[   12.220349   8regs       672.800 MB/sec +   8.099557] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off 
-  12.320349]    32regs    :   668.400 MB/sec +   8.113784qca8k 37000000.mdio-mii:10 lan1configuring for phy/internal link mode 
-[   12.420343]    neon      :  2446.000 MB/sec +Press the [fkey and hit [enter] to enter failsafe mode 
-[   12.420366] xor: using function: neon (2446.000 MB/sec) +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
-[   12.641377] Btrfs loaded, crc32c=crc32c-generic +[   10.382306] mount_root: loading kmods from internal overlay 
-[   12.655687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +[   10.401025] kmodloader: loading kernel modules from //etc/modules-boot.d/
-[   12.658601] SCSI subsystem initialized +[   10.403250] kmodloader: done loading kernel modules from //etc/modules-boot.d/
-  12.666407] libata version 3.00 loaded. +[   12.102890block: attempting to load /tmp/overlay/upper/etc/config/fstab 
-[   12.669630] ehci-fsl: Freescale EHCI Host controller driver +[   12.102990] block: unable to load configuration (fstabEntry not found) 
-[   12.670139] ehci-platform: EHCI generic platform driver +[   12.108692] blockattempting to load /tmp/overlay/etc/config/fstab 
-[   12.677474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver +[   12.115558] block: unable to load configuration (fstab: Entry not found) 
-[   12.679577] ohci-platform: OHCI generic platform driver +[   12.121534] block: attempting to load /etc/config/fstab 
-[   12.688165] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found +[   12.133663] block: unable to load configuration (fstab: Entry not found) 
-[   12.690669] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found +[   12.133718] block: no usable configuration 
-[   12.696485] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found +[   12.145265] UBIFS (ubi0:2): Mounting in unauthenticated mode 
-[   12.702637] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found +[   12.145676] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 189 
-[   12.710160] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found +[   12.254488] UBIFS (ubi0:2): recovery needed 
-[   12.714195] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found +[   12.490637] UBIFS (ubi0:2): recovery completed 
-[   12.719922] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found +[   12.490732] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" 
-[   12.726071] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found +[   12.494054] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
-[   12.742963] dwc3 11000000.dwc3: Failed to get clk 'ref': -2 +[   12.501977] UBIFS (ubi0:2): FS size: 39870464 bytes (38 MiB, 314 LEBs), max 324 LEBs, journal size 2031616 bytes (MiB, 16 LEBs) 
-[   12.791328] dwc3 10000000.dwc3: Failed to get clk 'ref': -2 +[   12.511844] UBIFS (ubi0:2): reserved for root: 1883180 bytes (1839 KiB) 
-[   12.854320] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[   12.523474] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 567E20DA-722C-4FF3-B009-41295EF11E61, small LPT model 
-  12.854381] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 +[   12.533700] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
-  12.858917] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010 +[   12.553598] block: extroot: not configured 
-  12.866407] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0x11000000 +[   12.553743] UBIFS (ubi0:2): un-mount UBI device 0 
-  12.876643] hub 1-0:1.0: USB hub found +[   12.556700] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops 
-[   12.881623] hub 1-0:1.0: 1 port detected +[   12.566974] UBIFS (ubi0:2): Mounting in unauthenticated mode 
-[   12.885565] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[   12.567536] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 190 
-  12.889441] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 +[   12.804941] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" 
-  12.894798] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed +[   12.804972] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
-  12.903115] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. +[   12.811812] UBIFS (ubi0:2): FS size: 39870464 bytes (38 MiB, 314 LEBs), max 324 LEBs, journal size 2031616 bytes (MiB, 16 LEBs) 
-  12.909239] hub 2-0:1.0: USB hub found +[   12.821716] UBIFS (ubi0:2): reserved for root: 1883180 bytes (1839 KiB) 
-  12.917212] hub 2-0:1.0: 1 port detected +[   12.833329] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 567E20DA-722C-4FF3-B009-41295EF11E61, small LPT model 
-  12.922097] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   14.393804] block: attempting to load /tmp/overlay/upper/etc/config/fstab 
-  12.924771] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 +[   14.404454] block: extroot: not configured 
-  12.930191] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010 +[   14.407265] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
-  12.937713] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0x10000000 +[   14.407614] block: extroot: not configured 
-  12.948844] hub 3-0:1.0: USB hub found +[   14.419352] mount_root: switching to ubifs overlay 
-[   12.952982] hub 3-0:1.0: 1 port detected +[   14.440611] urandom-seed: Seeding with /etc/urandom.seed 
-[   12.956885] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   14.538508] procd: - early - 
-  12.960865] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 +[   14.538624] procd: - watchdog - 
-  12.966082] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed +[   15.137414] procd: - watchdog - 
-  12.973777] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. +[   15.213528] procd: - ubus - 
-  12.980608] hub 4-0:1.0: USB hub found +[   15.591612] procd: - init - 
-  12.988488] hub 4-0:1.0: 1 port detected +Please press Enter to activate this console. 
-  12.994406] usbcore: registered new interface driver usb-storage +[   17.101950] urngd: v1.0.2 started. 
-  12.996203] kmodloader: done loading kernel modules from /etc/modules-boot.d/+[   17.157490] kmodloader: loading kernel modules from /etc/modules.d/
-  13.006292] init: - preinit - +[   17.210433] tun: Universal TUN/TAP device driver, 1.6 
-  15.917227] dwmac1000: Master AXI performs any burst length +[   17.236821GACT probability on 
-  15.917274] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found +[   17.237518] Mirror/redirect action on 
-  15.921738] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported +[   17.243163] u32 classifier 
-  15.929791] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock +[   17.243186]     input device check on 
-  15.938733] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode +[   17.245190]     Actions configured 
-  15.946812] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off +[   17.261395] fuse: init (API version 7.39
-  15.946868IPv6ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready +[   17.272038] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 
-  19.085301Starting lvm2 during preinit +[   17.272073] Backport generated by backports.git 193becf2 
-  21.089217device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com +[   17.319596] xt_time: kernel timezone is -0000 
-[   21.429213] mount_root: loading kmods from internal overlay +[   17.457958] PPP generic driver version 2.4.2 
-[   21.460100] kmodloader: loading kernel modules from //etc/modules-boot.d/+[   17.458824] NET: Registered PF_PPPOX protocol family 
-[   21.463681] kmodloader: done loading kernel modules from //etc/modules-boot.d/+[   17.533465] ath10k 6.driver, optimized for CT firmware, probing pci device: 0x3c. 
-[   23.188074UBIFS (ubi0:2): default file-system created +[   17.551687] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) 
-[   23.189798] UBIFS (ubi0:2): Mounting in unauthenticated mode +[   17.552293] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 
-[   23.193356] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 157 +[   61.237892] ath10k_pci 0001:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 
-[   23.453765] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" +[   61.237934] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs testmode 0 
-[   23.453808] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes +[   61.246842] ath10k_pci 0001:01:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f 
-[   23.460685] UBIFS (ubi0:2): FS size: 44314624 bytes (42 MiB, 349 LEBs), journal size 2158592 bytes (MiB, 17 LEBs) +[   61.470080] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 
-[   23.470572] UBIFS (ubi0:2): reserved for root: 2093089 bytes (2044 KiB) +[   62.333135] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 
-[   23.480792] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 66F4BC49-4029-4011-AA8E-82C7DCAB48CE, small LPT model +[   62.343396] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410' 
-[   23.489420] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab +[   62.343455] ath10k_pci 0001:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' 
-[   23.499073] block: unable to load configuration (fstabEntry not found) +[   62.348520] ath10k_pci 0001:01:00.0: wmi print 'alloc rem: 24984 iram: 38672
-[   23.505706] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab +[   62.422931] ath10k_pci 0001:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 
-[   23.512807] block: unable to load configuration (fstab: Entry not found) +[   62.423286] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000 
-[   23.518882] block: attempting to load /etc/config/fstab +[   62.538593kmodloaderdone loading kernel modules from /etc/modules.d/* 
-[   23.526369] block: unable to load configuration (fstab: Entry not found) +[   69.970638ipq806x-gmac-dwmac 37200000.ethernet eth0Link is Down 
-[   23.530658] block: no usable configuration +[   70.007982] ipq806x-gmac-dwmac 37200000.ethernet eth0Register MEM_TYPE_PAGE_POOL RxQ-0 
-[   23.544934] UBIFS (ubi0:2): un-mount UBI device 0 +[   70.008976dwmac1000Master AXI performs any burst length 
-[   23.545917] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops +[   70.015285ipq806x-gmac-dwmac 37200000.ethernet eth0No Safety Features support found 
-[   23.553591] UBIFS (ubi0:2): Mounting in unauthenticated mode +[   70.030508] ipq806x-gmac-dwmac 37200000.ethernet eth0IEEE 1588-2008 Advanced Timestamp supported 
-[   23.555724] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 158 +[   70.030662ipq806x-gmac-dwmac 37200000.ethernet eth0registered PTP clock 
-[   23.739886] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" +[   70.038447ipq806x-gmac-dwmac 37200000.ethernet eth0configuring for fixed/rgmii link mode 
-[   23.739925] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes +[   70.045418ipq806x-gmac-dwmac 37200000.ethernet eth0Link is Up 1Gbps/Full - flow control off 
-[   23.746811] UBIFS (ubi0:2): FS size: 44314624 bytes (42 MiB, 349 LEBs), journal size 2158592 bytes (MiB, 17 LEBs) +[   70.111027ipq806x-gmac-dwmac 37400000.ethernet eth1Register MEM_TYPE_PAGE_POOL RxQ-0 
-[   23.756679] UBIFS (ubi0:2): reserved for root: 2093089 bytes (2044 KiB) +[   70.111916] dwmac1000: Master AXI performs any burst length 
-[   23.766916] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 66F4BC49-4029-4011-AA8E-82C7DCAB48CE, small LPT model +[   70.118267] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found 
-[   25.615772] ubi0 error: 0xc06599b0: cannot open device 0, volume 2, error -16 +[   70.133595] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported 
-[   25.615827] ubi0 error: 0xc06599b0: cannot open device 0, volume 2, error -16 +[   70.133776] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock 
-[   26.985704] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab +[   70.142292] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode 
-[   26.985790] block: unable to load configuration (fstabEntry not found) +[   70.148709] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off 
-[   26.991577] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab +[   70.158198qca8k 37000000.mdio-mii:10 lan1configuring for phy/internal link mode 
-[   26.998474] block: unable to load configuration (fstab: Entry not found) +[   70.241284] br-lan: port 1(lan1) entered blocking state 
-[   27.004863] block: attempting to load /etc/config/fstab +[   70.241393] br-lan: port 1(lan1) entered disabled state 
-[   27.011632] block: unable to load configuration (fstabEntry not found) +[   70.245427qca8k 37000000.mdio-mii:10 lan1: entered allmulticast mode 
-[   27.016494] block: no usable configuration +[   70.250655ipq806x-gmac-dwmac 37400000.ethernet eth1: entered allmulticast mode 
-[   27.025178] mount_root: overlay filesystem has not been fully initialized yet +[   70.263581] qca8k 37000000.mdio-mii:10 lan1: entered promiscuous mode 
-[   27.027536] mount_root: switching to ubifs overlay +[   70.309581] qca8k 37000000.mdio-mii:10 lan2: configuring for phy/internal link mode 
-[   27.066857] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off. +[   70.320816] br-lan: port 2(lan2) entered blocking state 
-[   27.072508] urandom-seed: Seed file not found (/etc/urandom.seed+[   70.320853] br-lan: port 2(lan2) entered disabled state 
-[   27.112552] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down +[   70.325005qca8k 37000000.mdio-mii:10 lan2: entered allmulticast mode 
-[   27.161181] procd: - early - +[   70.344729qca8k 37000000.mdio-mii:10 lan2: entered promiscuous mode 
-[   27.161333] procd: - watchdog - +[   70.434819] qca8k 37000000.mdio-mii:10 lan3: configuring for phy/internal link mode 
-[   27.732439] procd: - watchdog - +[   70.435214] br-lanport 3(lan3) entered blocking state 
-[   27.732704] procd: - ubus - +[   70.441421br-lan: port 3(lan3) entered disabled state 
-[   27.795801] procd: - init - +[   70.446529] qca8k 37000000.mdio-mii:10 lan3: entered allmulticast mode 
-[   28.127652] urngd: v1.0.2 started. +[   70.467727] qca8k 37000000.mdio-mii:10 lan3: entered promiscuous mode 
-[   28.134320] kmodloader: loading kernel modules from /etc/modules.d/+[   70.616148] qca8k 37000000.mdio-mii:10 lan4: configuring for phy/internal link mode 
-[   28.148232] NET: Registered protocol family 38 +[   70.616557br-lan: port 4(lan4) entered blocking state 
-[   28.153981] FS-Cache: Loaded +[   70.622745] br-lan: port 4(lan4) entered disabled state 
-[   28.157294] Key type dns_resolver registered +[   70.627986] qca8k 37000000.mdio-mii:10 lan4: entered allmulticast mode 
-[   28.164736] Key type cifs.idmap registered +[   70.676895qca8k 37000000.mdio-mii:10 lan4: entered promiscuous mode 
-[   28.175300] RPC: Registered named UNIX socket transport module. +[   70.717193] qca8k 37000000.mdio-mii:10 wan: configuring for phy/internal link mode 
-[   28.175322] RPC: Registered udp transport module. +[   73.848567qca8k 37000000.mdio-mii:10 lan3: Link is Up - 1Gbps/Full - flow control off 
-[   28.180014] RPC: Registered tcp transport module. +[   73.848626br-lanport 3(lan3entered blocking state 
-[   28.184956] RPC: Registered tcp NFSv4.1 backchannel transport module. +[   73.855457] br-lan: port 3(lan3) entered forwarding state
-[   28.194653] tun: Universal TUN/TAP device driver, 1.6 +
-[   28.210514Installing knfsd (copyright (C) 1996 okir@monad.swb.de). +
-[   28.215579] NFS: Registering the id_resolver key type +
-[   28.215941] Key type id_resolver registered +
-[   28.220954] Key type id_legacy registered +
-[   28.236993] Mirror/redirect action on +
-[   28.240169] u32 classifier +
-[   28.240184]     input device check on +
-[   28.242323]     Actions configured +
-[   28.261510] fuse: init (API version 7.31+
-[   28.264404] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056 +
-[   28.264495] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb +
-[   28.349020] xt_time: kernel timezone is -0000 +
-[   28.389221] PPP generic driver version 2.4.2 +
-[   28.390520] NET: Registered protocol family 24 +
-[   28.420944] ath10k_pci 0001:01:00.0: assign IRQ: got 37 +
-[   28.420967] ath10k 5.driver, optimized for CT firmware, probing pci device: 0x3c. +
-[   28.421023] ath10k_mac_create, priv_size: 868  hw: 37b53e8d  hw->priv: ab0078a2 +
-[   28.437075] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) +
-[   28.437182] ath10k_pci 0001:01:00.0: enabling bus mastering +
-[   28.437715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 +
-[   29.297554] ath10k_pci 0001:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 +
-[   29.297589] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs testmode 0 +
-[   29.306684] ath10k_pci 0001:01:00.0: firmware ver 10.1-ct-8x-fW-022-538f0906 +
-[   29.419120] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 +
-[   30.341299] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536 +
-[   30.343860] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 +
-[   30.356810] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410' +
-[   30.356838] ath10k_pci 0001:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' +
-[   30.361945] ath10k_pci 0001:01:00.0: wmi print 'alloc rem: 20984 iram: 25656+
-[   30.415394] ath10k_pci 0001:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 +
-[   30.428566] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000 +
-[   30.537788athEEPROM regdomain sanitized +
-[   30.537798athEEPROM regdomain0x64 +
-[   30.537805athEEPROM indicates we should expect a direct regpair map +
-[   30.537820athCountry alpha2 being used00 +
-[   30.537826ath: Regpair used0x64 +
-[   30.546635kmodloaderdone loading kernel modules from /etc/modules.d/* +
-[   46.070350ubi0 error0xc06599b0: cannot open device 0, volume 2, error -16 +
-[   46.070882ubi0 error0xc06599b0: cannot open device 0, volume 2, error -16 +
-[   46.077119] dwmac1000: Master AXI performs any burst length +
-[   46.083671] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found +
-[   46.088964] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported +
-[   46.097120] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock +
-[   46.106031] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode +
-[   46.115041] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off +
-[   46.124651IPv6ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready +
-[   46.134886] br-lan: port 1(eth1.1) entered blocking state +
-[   46.141997] br-lan: port 1(eth1.1) entered disabled state +
-[   46.147639device eth1.entered promiscuous mode +
-[   46.152915device eth1 entered promiscuous mode +
-[   46.161360] br-lan: port 1(eth1.1) entered blocking state +
-[   46.167615] br-lan: port 1(eth1.1) entered forwarding state +
-[   46.186958dwmac1000Master AXI performs any burst length +
-[   46.195298ipq806x-gmac-dwmac 37200000.ethernet eth0No Safety Features support found +
-[   46.200844ipq806x-gmac-dwmac 37200000.ethernet eth0IEEE 1588-2008 Advanced Timestamp supported +
-[   46.208884ipq806x-gmac-dwmac 37200000.ethernet eth0registered PTP clock +
-[   46.217842ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode +
-[   46.225546ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off +
-[   46.233895IPv6ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready +
-[   47.131573IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready+
  
-root@OpenWrt:/# df -h+root@OpenWrt:~# df -h
 Filesystem                Size      Used Available Use% Mounted on Filesystem                Size      Used Available Use% Mounted on
-/dev/root                15.0M     15.0M         0 100% /rom +/dev/root                16.5M     16.5M         0 100% /rom 
-tmpfs                   234.1M      2.6M    231.5M   1% /tmp +tmpfs                   232.1M      3.9M    228.2M   2% /tmp 
-/dev/ubi0_2              38.4M     64.0K     36.4M   0% /overlay +/dev/ubi0_2              34.5M    176.0K     32.5M   1% /overlay 
-overlayfs:/overlay       38.4M     64.0K     36.4M   0% /+overlayfs:/overlay       34.5M    176.0K     32.5M   1% /
 tmpfs                   512.0K            512.0K   0% /dev tmpfs                   512.0K            512.0K   0% /dev
-root@OpenWrt:/# mount + 
-/dev/root on /rom type squashfs (ro,relatime)+root@OpenWrt:~# mount 
 +/dev/root on /rom type squashfs (ro,relatime,errors=continue)
 proc on /proc type proc (rw,nosuid,nodev,noexec,noatime) proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
 sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
 +cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
 tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
 /dev/ubi0_2 on /overlay type ubifs (rw,noatime,assert=read-only,ubi=0,vol=2) /dev/ubi0_2 on /overlay type ubifs (rw,noatime,assert=read-only,ubi=0,vol=2)
 overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work) overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
-tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755) +tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755) 
-devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)+devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
 debugfs on /sys/kernel/debug type debugfs (rw,noatime) debugfs on /sys/kernel/debug type debugfs (rw,noatime)
-root@OpenWrt:/# free+bpffs on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700) 
 + 
 +root@OpenWrt:~# free
               total        used        free      shared  buff/cache   available               total        used        free      shared  buff/cache   available
-Mem:         479468       43500      382452        2652       53516      390872 +Mem:         475432       43288      372860        4008       59284      380376 
-Swap:                                 0 + 
-root@OpenWrt:/# cat /proc/cpuinfo +root@OpenWrt:~# cat /proc/cpuinfo
 processor       : 0 processor       : 0
 model name      : ARMv7 Processor rev 0 (v7l) model name      : ARMv7 Processor rev 0 (v7l)
-BogoMIPS        : 6.00 +BogoMIPS        : 21.87 
-Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 +Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32
 CPU implementer : 0x51 CPU implementer : 0x51
 CPU architecture: 7 CPU architecture: 7
Line 2250: Line 2245:
 processor       : 1 processor       : 1
 model name      : ARMv7 Processor rev 0 (v7l) model name      : ARMv7 Processor rev 0 (v7l)
-BogoMIPS        : 12.50 +BogoMIPS        : 45.57 
-Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 +Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32
 CPU implementer : 0x51 CPU implementer : 0x51
 CPU architecture: 7 CPU architecture: 7
Line 2266: Line 2261:
  
 ===== Notes ===== ===== Notes =====
-//Room for additional notes.//+  * OpenWrt forum thread: [[https://forum.openwrt.org/t/e8350-why-not-supported-by-openwrt/57640]] 
 +  * Pull request for a current release: [[https://github.com/openwrt/openwrt/pull/15798]] 
 +  * Test builds with 5GHz radio support:\\ v20: [[https://github.com/SergeyFilippov/openwrt/releases/tag/v20.e8350-snapshot]] \\ v22: [[https://github.com/SergeyFilippov/openwrt/releases/tag/v22.03-release-qtn]] 
 +      * Flash it over the native Linksys WEB interface. 
 +      * **5GHz wifi** configuration is done manually via editing the /etc/rc.local file.\\ (LuCI web interface does not know how to properly handle quantenna driver at the moment) 
 +  * Test builds with **LUCI** from official snapshot image builder with pinned kmods, **no 5GHz radio**:\\ v24: [[https://github.com/SergeyFilippov/openwrt/releases/tag/v24.0.0-beta-snapshot]]
  
  
  • Last modified: 2024/10/04 03:44
  • by jeremynd01