Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
inbox:toh:linksys:linksys_ea8350_1 [2020/07/15 11:36] – old revision restored (2020/07/15 11:35) tcolovinbox:toh:linksys:linksys_ea8350_1 [2024/10/04 03:44] (current) – [De-bricking / Recovery-mode Installation] jeremynd01
Line 1: Line 1:
 ====== Linksys E8350 V1====== ====== Linksys E8350 V1======
 ~~NOTOC~~ ~~NOTOC~~
- 
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ 
  
 {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}
  
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//+AC2400 Dual-Band Gigabit Wi-Fi Router. 
 +/* //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//*/
  
 /*****/ /*****/
Line 17: Line 16:
 ===== OpenWrt support ===== ===== OpenWrt support =====
  
-<color red>**WiP.**</color> + 
-Developer discussion under: +===== Hardware highlights ===== 
-https://forum.openwrt.org/t/e8350-why-not-supported-by-openwrt/57640+^ CPU                                    ^ Ram       ^ Flash       ^ Network         ^ WLAN        ^ USB  ^ eSata    ^ Serial ^ JTag   ^ 
 +| Qualcomm dual-core IPQ8064 @ 1.4 GHz    512 MiB  |  4+128 MiB  |  4x 10/100/100  |  bgn + ac    2     Yes    |   Yes  |   ? 
  
 /*** if info available: uncomment and fill in /*** if info available: uncomment and fill in
-===== Supporting activities ===== +===== Installation ===== 
-//Describe if there are any ongoing activities that might lead to OpenWrt support.// +  - → [[:downloads|Obtain firmware]] 
-Initial discussion+  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]] 
-https://forum.openwrt.org/t/e8350-why-not-supported-by-openwrt/57640 +  → [[:downloads|Latest OpenWrt release]]
-SoC IPQ8064 hardware is supported.+
  
-  * OpenWrt forum thread: (add link)+==== Installing OpenWrt ====
 ***/ ***/
  
 +===== Installation =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
 +  "filterColumns": {"brand": "^Linksys$", "model": "^E8350$"}
 +} -->
  
-/*** if info availableuncomment and fill in +→ [[docs:guide-user:installation:generic.flashing|Install OpenWrt]]
-===== Experimental firmware ===== +
-WiP +
-//List experimental firmware download links here.//+
  
-//None at this time.//+<color #ed1c24>!</color> Currently available firmware is **snapshot** only, so **it will not have a web UI**.\\ 
 +A snapshot build with LUCI(web UI) and attached kmods archive [[https://github.com/SergeyFilippov/openwrt/releases/tag/v24.0.0-beta-snapshot]]. \\ //Will be removed after v24 release.//
  
-  * External image (add link) +===== OEM Easy Installation ===== 
-  * trunk image (add link) +  - Login to router web UI 
-  * ... +  - Got to Administration/Firmware upgrade 
-***/+  - Use factory image from latest available release (*factory.bin)
  
 +===== De-bricking / Recovery-mode Installation =====
  
-===== Hardware highlights ===== +Since this router has 2 flash chips it's almost unbrickable.
-^ CPU                                    ^ Ram       ^ Flash       ^ Network          ^ WLAN        ^ USB      ^ Serial   ^ JTag   ^ eSata  ^ +
-| Qualcomm dual-core IPQ8064 @ 1.4 GHz    512 MiB  |  4+128 MiB  |  4x 10/100/100  |  bgn + ac    2x 3.0  |   Yes    |   ?    |   Yes  |+
  
 +  - Get the original firmware: [[https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.03.003_20180929.bin]] or *factory.bin of OpenWrt
 +  - Power off the device and disconnect the WAN port. (Only LAN port to be connected)
 +  - Press & hold the "Reset" button
 +  - Power on the device & wait for 10 seconds with pressed "Reset" button
 +  - Set static IP on your PC from 192.168.1.0/24 network (Router is on IP 192.168.1.1)
 +  - Open the Firmware Recovery page in your browser: http://192.168.1.1/index.shtml\\ //Firmware Recovery -> File Name -> Recovery & Reboot//
  
-/*** if info available: uncomment and fill in +If firmware update fails, you may have to upgrade OEM firmware in order, see
-===== Installation ===== +
-  - → [[:downloads|Obtain firmware]] +
-  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]] +
-  - → [[:downloads|Latest OpenWrt release]] +
- +
-==== Installing OpenWrt ==== +
-***/+
  
 +[[https://downloads.linksys.com/downloads/releasenotes/E8350_FwReleaseNotes_1.0.03.txt]]
  
-===== Debricking ===== +[[https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.01.037_20151012.bin]]
-Get the original firmware:  +
-https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.03.003_20180929.bin\\ +
-1. power off the device and disconnect the WAN port. (Only LAN port to be connected)\\ +
-2. press & hold the "Reset" button\\ +
-3. power on the deiece & wait for 10 seconds with pressed "Reset" button\\ +
- - the Router will open Firmware Recovery "http" server on IP: 192.168.1.1\\ +
-4. set IP on your PC from 192.168.1.0/24 network ( Router is on IP 192.168.1.1 )\\ +
-5. open in browser URL:\\ +
-http://192.168.1.1/index.shtml +
-    Firmware Recovery -> File Name -> Recovery & Reboot+
  
 +[[https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.02.009_US_20150911_single.image]]
  
 +===== Going back to Linksys Firmware / Flashing back to stock =====
 +  - Follow the instructions in De-bricking / Recovery-mode Installation with an original firmware
  
 /*** if info available: uncomment and fill in /*** if info available: uncomment and fill in
Line 86: Line 85:
  
  
-/*** if info available: uncomment and fill in 
 ===== Specific configuration ===== ===== Specific configuration =====
- 
-<WRAP BOX 600px> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. 
  
 ==== Network interfaces ==== ==== Network interfaces ====
 The default network configuration is: The default network configuration is:
 ^ Interface Name   ^ Description                  ^ Default configuration    ^ ^ Interface Name   ^ Description                  ^ Default configuration    ^
-| br-lan           EXAMPLE LAN & WiFi           EXAMPLE 192.168.1.1/24   | +| br-lan           | LAN & WiFi           | 192.168.1.1/24   | 
-vlan0 (eth0.0)   EXAMPLE LAN ports (1 to 4)   EXAMPLE None             | +vlan1 (eth0.1)   | LAN ports (1 to 4)   | None             | 
-vlan1 (eth0.1)   EXAMPLE WAN port             EXAMPLE DHCP             | +vlan2 (eth0.2)   | WAN port             | DHCP             | 
-wl0              EXAMPLE WiFi                 EXAMPLE Disabled         | +wlan0            | WiFi (2.4 GHz)       | Disabled         | 
-</WRAP> +/* | wlan1            | WiFi (5 GHz)         | Disabled         *
-***/+
  
  
-/*** if info available: uncomment and fill in 
 ==== Buttons ==== ==== Buttons ====
 -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
-Here, we merely name the buttons, so we can use them in the above Howto. 
- 
-<WRAP BOX 600px> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. 
  
 The Linksys E8350 has the following buttons: The Linksys E8350 has the following buttons:
  
-^ BUTTON                       ^ Event   +^ BUTTON         ^ Event       
-EXAMPLE Reset                 reset  +| Reset          Reset       
-EXAMPLE Secure Easy Setup      ses   +Wifi           Wifi On/Off 
-EXAMPLE No buttons at all.         +WPS            WPS         
-</WRAP> +| Power(switch)  | Power On/Off|
-***/+
  
  
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-^ Architecture     | ARM (armv7l cortex-a15+neon vfpv4)       +^ Architecture    | ARM (armv7l cortex-a15+neon vfpv4)         
-^ Vendor           | Linksys                                  +^ Vendor          | Linksys                                    
-^ Bootloader       | U-Boot                                   +^ Bootloader      | U-Boot                                     
-^ System-On-Chip   | Qualcomm IPQ8064 @ 1.4 GHz               +^ System-On-Chip  | Qualcomm IPQ8064 @ 1.4 GHz                 
-^ CPU/Speed        | 2 x 1.4 GHz                              +^ CPU/Speed       | 2 x 1.4 GHz                                
-^ Flash-Chips      | SPI MX25U3235F + NAND MT29F1G08ABBDAH4   +^ Flash-Chips     | SPI MX25U3235F + NAND S34MS01G2            
-^ Flash sizes      | 4 MiB SPI + 128 MiB  NAND                |  +^ Flash sizes     | 4 MiB SPI + 128 MiB  NAND                  
-^ RAM              | 512 MiB   (491 MiB for the OS)           +^ RAM             | 512 MiB   (491 MiB for the OS)             
-^ Wireless       | Qualcomm QCA9880 2.4GHz 802.11bgn        +^ Wireless      | Qualcomm QCA9880 2.4GHz 802.11bgn          
-^ Wireless       | Quantenna QSR1000 5GHz 802.11ac          +^ Wireless      | Quantenna QSR1000 5GHz 802.11ac            
-^ Ethernet         | 4 x 10/100/1000 Mbit/s w/ vlan support   +^ Ethernet        | 4 x 10/100/1000 Mbit/s w/ vlan support     
-^ Switch           | Qualcomm Atheros QCA8337                 +^ Switch          | Qualcomm Atheros QCA8337                   
-^ USB              x 3.0                                  +^ USB             x 3.0 + 1 x 2.0 (combo with eSata port)  
-^ eSata            | 1 (combo with one of the USB ports)      +^ eSata           | 1 (combo with one of the USB ports)        
-^ Serial           | [[#Serial|Yes|Not populated]]            +^ Serial          | [[#Serial|Yes]]                            
-^ JTAG             | [[#JTAG|Not populated]]                  |+^ JTAG            | [[#JTAG|Not populated]]                    |
  
  
-/* 
 ==== Flash Layout ==== ==== Flash Layout ====
 +**"mtd2 - mtd16"** - small SPI flash - u-boot & board configs.
  
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).// +^ Layer0  |  SPI NOR flash 4 MiB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         ||||||||||||||||| 
-<WRAP BOX> +^ Layer1  |  mtd2 **//0:sbl1//** \\ 64 KiB\\ first stage boot loader  |  mtd3 **//0:mibib//** \\ 128 KiB  |  mtd4 **//0:sbl2//** \\ 128 KiB        |||  mtd5 **//0:sbl3//**\\ 192 KiB  | mtd6 **//0:ddrconfig//**\\ 64 KiB  | mtd7 **//0:ssd//**\\ 64 KiB  | mtd8 **//0:tz//**\\ 192 KiB  | mtd9 **//0:rpm//**\\ 128 KiB  | mtd10 **//0:oldappsbl//**\\ 256 KiB  | mtd11 **//0:appsblenv//**\\ 256 KiB\\ Device MAC address is here  | mtd12 **//0:ART//**\\ 128 KiB  | mtd13 **//0:uboot//**\\ 320 KiB  mtd14 **//0:oldnss1//**\\ 128 KiB  | mtd15 **//0:nvram//**\\ 128 KiB  mtd16 **//0:oldkernel//**\\ 1920 KiB\\ Not usedKernel in NAND UBI  |
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.+
  
-# cat /proc/mtd  +**"mtd0-mtd1"** - is the big NAND flash. **"mtd0"** used as /dev/ubi0. 
-dev:    size   erasesize  name + 
-mtd0: 04000000 00020000 "rootfs+^ Layer0  |  NAND flash 128 MiB                                                                                                                                                                                                                                                                                                                                                                     |||| 
-mtd1: 00010000 00010000 "sbl1" +| Layer1  |  mtd0 **//ubi//**\\ 64 MiB                                                                                                                                                                                                                                                                                                                                ||| mtd1 **//extra//**\\ 64 MiB  | 
-mtd2: 00020000 00010000 "mibib" +| Layer2  |  UBI partition **///dev/ubi0//**                                                                                                                                                                                                                                                                                                                               ||| Not used                     | 
-mtd3: 00020000 00010000 "sbl2" +| Layer3  | **''kernel''** **///dev/ubi0_0//**\\ Linux kernel (raw image)  | **''rootfs''**  **///dev/ubi0_1//**\\ mounted: "''/rom''", [[docs:techref:filesystems#SquashFS|SquashFS]] \\ size depends on selected packages  | **''rootfs_data''** **///dev/ubi0_2//**\\ mounted: "''/overlay''", [[docs:techref:filesystems#UBIFS|UBIFS]] \\ all remaining free space  |                              | 
-mtd4: 00030000 00010000 "sbl3" + 
-mtd5: 00010000 00010000 "ddrconfig" + 
-mtd6: 00010000 00010000 "ssd" + 
-mtd7: 00030000 00010000 "tz" +==== FLASH partitions ==== 
-mtd8: 00020000 00010000 "rpm" +<code> 
-mtd9: 00040000 00010000 "oldappsbl" +# cat /proc/mtd  
-mtd10: 00040000 00010000 "APPSBLENV+dev:    size   erasesize  name  
-mtd11: 00020000 00010000 "ART" +mtd0: 04000000 00020000 "ubi" 128MiB flash 
-mtd12: 00050000 00010000 "uboot" +mtd1: 04000000 00020000 "extra" 128MiB flash 
-mtd13: 00020000 00010000 "oldnss1" +mtd2: 00010000 00010000 "0:sbl1" SPI 4MiB flash 
-mtd14: 00020000 00010000 "nvram" +mtd3: 00020000 00010000 "0:mibib" SPI 4MiB flash 
-mtd15: 001e0000 00010000 "oldkernel" +mtd4: 00020000 00010000 "0:sbl2" SPI 4MiB flash 
-mtd16: 001d1000 0001f000 "kernel" +mtd5: 00030000 00010000 "0:sbl3" SPI 4MiB flash 
-mtd1701d2f000 0001f000 "ubi_rootfs" +mtd6: 00010000 00010000 "0:ddrconfig" SPI 4MiB flash 
-mtd1801de9000 0001f000 "ubi_rootfs_data"+mtd7: 00010000 00010000 "0:ssd" SPI 4MiB flash 
 +mtd8: 00030000 00010000 "0:tz" SPI 4MiB flash 
 +mtd9: 00020000 00010000 "0:rpm" SPI 4MiB flash 
 +mtd10: 00040000 00010000 "0:oldappsbl" SPI 4MiB flash 
 +mtd11: 00040000 00010000 "0:appsblenv" SPI 4MiB flash 
 +mtd12: 00020000 00010000 "0:ART" SPI 4MiB flash 
 +mtd13: 00050000 00010000 "0:uboot" SPI 4MiB flash 
 +mtd14: 00020000 00010000 "0:oldnss1" SPI 4MiB flash 
 +mtd15: 00020000 00010000 "0:nvram" SPI 4MiB flash 
 +mtd16: 001e0000 00010000 "0:oldkernel" SPI 4MiB flash - another linux kernel -> not used, kernel loads initially directly from the NAND UBI volume 0(ubi/rootfs) which is OS mapped under the mtd0 -> /dev/ubi0 
 +/dev/ubi0_0 - linux kernel 
 +/dev/ubi0_1 - rootfs squashfs 
 +/dev/ubi0_2 - rootfs_data(rw) -> overlay 
 +</code> 
 + 
 +!!! WARNINGDo not touch the SPI partitions. You might damage the boot process. 
 + 
 +128MiB nand flash is split in two 64MiB partitions: "ubi/rootfs - mtd0 and "extra - mtd1"\\ 
 +First partition is the OS. The Second partition is not used ( may be the manufacturer initially wanted to have dual boot device with recovery partition )
  
-mtd004000000 00020000 "rootfs is the big NAND flash used as /dev/ubi0 +You can use the second 64MiB partition the way you want: 
-mtd16: 001d1000 0001f000 "kernel-> /dev/ubi0_0 + 
-mtd1701d2f000 0001f000 "ubi_rootfs-> /dev/ubi0_1 +MAKE SURE "Extrapartition is visible and mapped to "mtd1" 
-mtd18: 01de9000 0001f000 "ubi_rootfs_data" -/dev/ubi0_2+ 
 +<code> 
 +cat /proc/mtd |grep extra 
 +mtd104000000 00020000 "extra" 
 + 
 +ubiformat /dev/mtd1 
 +ubiattach -m 1 
 +ubimkvol /dev/ubi1 -n0 -N extra_space -m 
 +</code>
  
-mtd1 - mtd15 - small SPI flash - u-boot & board configs 
-</WRAP> 
  
-*/ 
 ==== Photos ==== ==== Photos ====
 /* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ /* =====>>>>> Standard size for photos: add ?400 to the medialink                                */
Line 185: Line 195:
 /* Thanks, your wiki administration - Oct. 2015 */ /* Thanks, your wiki administration - Oct. 2015 */
  
-front +{{:media:linksys:linksys-e8350-product.jpg?0x220|}} 
-{{:media:linksys:linksys-e8350-product.jpg?400|}} +{{:media:linksys:linksys-ea8350-backpanel.jpg?0x220|}}                                  
- +
-backside +
- {{:media:linksys:linksys-ea8350-backpanel.jpg?400|}}                                  +
  
-PCB +{{:media:linksys:linksys-ea8350-inside.jpg?400|}}                                  
- {{:media:linksys:linksys-ea8350-inside.jpg?400|}}                                  +
  
 ==== Opening the case ==== ==== Opening the case ====
-Remove the rubber legs at the bottom side of the router. \\ +  * Remove the rubber legs at the bottom side of the router. 
-There are 4 screws which have to be removed.\\ +  There are 4 screws which have to be removed. 
-Use plastic card or similar tool and gently start opening it from the back side. \\+  Use plastic card or similar tool and gently start opening it from the back side.
  
 ==== Serial ==== ==== Serial ====
-The serial port pins are unpopulated. You need to solder connecting cables or similar. \\ +The serial port pins are unpopulated. You need to solder connecting cables or similar. 
- {{:media:linksys:linksys-ea8350-serialport.jpg?400|}}                                  + 
 +{{:media:linksys:linksys-ea8350-serialport.jpg?400|}}                                  
  
 ^ Serial connection parameters\\ for Linksys E8350 v1 | 115200, 8N1 | ^ Serial connection parameters\\ for Linksys E8350 v1 | 115200, 8N1 |
 +
 USB to Serial TTL:\\ USB to Serial TTL:\\
 TX PCB board <> RX USB serial ttl dongle\\ TX PCB board <> RX USB serial ttl dongle\\
 RX PCB board <> TX USB serial ttl dongle\\ RX PCB board <> TX USB serial ttl dongle\\
 GND PCB board <> GND USB serial ttl dongle GND PCB board <> GND USB serial ttl dongle
- 
- 
  
  
 ==== JTAG ==== ==== JTAG ====
-JTAG is not tested. It looks like there are not populated JTAG pins on the PCB. +JTAG is not tested. It looks like there are not populated JTAG pins on the PCB.  
 ===== Bootlogs ===== ===== Bootlogs =====
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
 +<nowiki>
 U-Boot 2012.07-svn65 [local,local] (Sep 11 2015 - 09:46:52) U-Boot 2012.07-svn65 [local,local] (Sep 11 2015 - 09:46:52)
  
Line 1715: Line 1723:
      0 crw-r--r--    1 root     root      248,   3 Jan  1  1970 /dev/ubi0_2      0 crw-r--r--    1 root     root      248,   3 Jan  1  1970 /dev/ubi0_2
      0 crw-r--r--    1 root     root       10,  58 Jan  1  1970 /dev/ubi_ctrl      0 crw-r--r--    1 root     root       10,  58 Jan  1  1970 /dev/ubi_ctrl
- +</nowiki>
- +
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki> 
 +U-Boot 2012.07-svn65 [local,local] (Sep 11 2015 - 09:46:52) 
 + 
 +CyberTan U-Boot Version: v1.0 
 + 
 +smem ram ptable found: ver: 0 len: 5 
 +DRAM:  491 MiB 
 +NAND:  SF: Detected MX25U3235F with page size 64 KiB, total 4 MiB 
 +ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x400000 
 +132 MiB 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +cdp: get part failed for rootfs 
 +Net:   MAC1 addr:0:3:7f:ba:db:
 +athrs17_reg_init: complete 
 +athrs17_vlan_config ...done 
 +S17 inits done 
 +MAC2 addr:0:3:7f:ba:db:
 +eth0 
 +Warning: eth0 MAC addresses don't match: 
 +Address in SROM is         00:03:7f:ba:db:01 
 +Address in environment is  c0:56:27:1e:12:cc 
 +, eth1 
 +Warning: eth1 MAC addresses don't match: 
 +Address in SROM is         00:03:7f:ba:db:02 
 +Address in environment is  00:06:3b:01:41:01 
 + 
 +Hit any key to stop autoboot: 
 +Device 1: nand1... is now current device 
 +Creating 1 MTD partitions on "nand0": 
 +0x000000000000-0x000004000000 : "mtd=0" 
 +UBI: attaching mtd2 to ubi0 
 +UBI: physical eraseblock size:   131072 bytes (128 KiB) 
 +UBI: logical eraseblock size:    126976 bytes 
 +UBI: smallest flash I/O unit:    2048 
 +UBI: VID header offset:          2048 (aligned 2048) 
 +UBI: data offset:                4096 
 +UBI: attached mtd2 to ubi0 
 +UBI: MTD device name:            "mtd=0" 
 +UBI: MTD device size:            64 MiB 
 +UBI: number of good PEBs:        512 
 +UBI: number of bad PEBs:         0 
 +UBI: max. allowed volumes:       128 
 +UBI: wear-leveling threshold:    4096 
 +UBI: number of internal volumes: 1 
 +UBI: number of user volumes:     3 
 +UBI: available PEBs:             15 
 +UBI: total number of reserved PEBs: 497 
 +UBI: number of PEBs reserved for bad PEB handling: 5 
 +UBI: max/mean erase counter: 2/1 
 +Read 0 bytes from volume kernel to 44000000 
 +No size specified -> Using max size (3555328) 
 +   Image Name:   ARM OpenWrt Linux-6.6.34 
 +   Image Type:   ARM Linux Kernel Image (uncompressed) 
 +   Data Size:    3487558 Bytes = 3.3 MiB 
 +   Load Address: 42208000 
 +   Entry Point:  42208000 
 +   Verifying Checksum ... OK 
 +   Loading Kernel Image ... OK 
 +OK 
 +Setting up atags for msm partition: rootfs 
 + 
 +device nand0 <nand0>, # parts = 1 
 + #: name                size            offset          mask_flags 
 + 0: fs                  0x04000000      0x00000000      0 
 + 
 +active partition: nand0,0 - (fs) 0x04000000 @ 0x00000000 
 + 
 +defaults: 
 +mtdids  : none 
 +mtdparts: none 
 +Using machid 0x1260 from environment 
 + 
 +Starting kernel ... 
 [    0.000000] Booting Linux on physical CPU 0x0 [    0.000000] Booting Linux on physical CPU 0x0
-[    0.000000] Linux version 5.4.50 (openwrt@tchome) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13773-a6160de3f7)) #0 SMP Fri Jul 10 23:09:18 2020+[    0.000000] Linux version 6.6.34 (root@a070fcda8c75) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 13.3.0 r26618-57d23ce28a13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Jun 20 11:28:40 2024
 [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
 [    0.000000] CPU: div instructions available: patching division code [    0.000000] CPU: div instructions available: patching division code
 [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
-[    0.000000] OF: fdt: Machine model: Linksys EA8300 V1 WiFi Router+[    0.000000] OF: fdt: Machine model: Linksys E8350 V1 WiFi Router
 [    0.000000] Memory policy: Data cache writealloc [    0.000000] Memory policy: Data cache writealloc
-[    0.000000] On node 0 totalpages122880 +[    0.000000] OFreserved mem: 0x40000000..0x40ffffff (16384 KiB) nomap non-reusable nss@40000000 
-[    0.000000]   Normal zone960 pages used for memmap +[    0.000000] OFreserved mem: 0x41000000..0x411fffff (2048 KiB) nomap non-reusable smem@41000000 
-[    0.000000]   Normal zone0 pages reserved +[    0.000000] OF: reserved mem: 0x41200000..0x414fffff (3072 KiB) nomap non-reusable rsvd@41200000 
-[    0.000000]   Normal zone: 122880 pages, LIFO batch:31 +[    0.000000] Zone ranges: 
-[    0.000000] percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440 +[    0.000000]   Normal   [mem 0x0000000042000000-0x000000005fffffff] 
-[    0.000000] pcpu-alloc: s29900 r8192 d23348 u61440 alloc=15*4096 +[    0.000000]   HighMem  empty 
-[    0.000000] pcpu-alloc: [0] 0 [0 +[    0.000000] Movable zone start for each node 
-[    0.000000] Built 1 zonelists, mobility grouping on Total pages121920 +[    0.000000] Early memory node ranges 
-[    0.000000] Kernel command line: +   0.000000]   node   0[mem 0x0000000042000000-0x000000005fffffff
 +[    0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff] 
 +[    0.000000] percpuEmbedded 13 pages/cpu s21076 r8192 d23980 u53248 
 +[    0.000000] Kernel command line:
 [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs
 [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
 [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
 [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
-[    0.000000] Memory: 478444K/491520K available (5712K kernel code, 165K rwdata, 884K rodata, 1024K init, 222K bss, 13076K reserved, 0K cma-reserved, 0K highmem)+[    0.000000] Memory: 474408K/491520K available (7372K kernel code, 624K rwdata, 2016K rodata, 1024K init, 239K bss, 17112K reserved, 0K cma-reserved, 0K highmem)
 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 [    0.000000] rcu: Hierarchical RCU implementation. [    0.000000] rcu: Hierarchical RCU implementation.
 +[    0.000000]  Tracing variant of Tasks RCU enabled.
 [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
 [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
 +[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
 [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
-[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns +[    0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns 
-[    0.000021] Switching to timer-based delay loop, resolution 160ns +[    0.000022] Switching to timer-based delay loop, resolution 160ns 
-[    0.000212] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) +[    0.000316] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) 
-[    0.000232] pid_max: default: 32768 minimum: 301 +[    0.000343] CPU: Testing write buffer coherency: ok 
-[    0.000379] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) +[    0.000396] pid_max: default: 32768 minimum: 301 
-[    0.000398] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) +[    0.009576] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
-[    0.001099CPUTesting write buffer coherencyok +[    0.009601] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
-[    0.002096] Setting up static identity map for 0x42300000 - 0x42300060 +[    0.018085qcom_scmconventionsmc legacy 
-[    0.002254] rcu: Hierarchical SRCU implementation. +[    0.019698] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. 
-[    0.002682] smp: Bringing up secondary CPUs ... +[    0.019944] Setting up static identity map for 0x42300000 - 0x42300060 
-[    0.004484] smp: Brought up 1 node, 2 CPUs +[    0.020192] rcu: Hierarchical SRCU implementation. 
-[    0.004501] SMP: Total of 2 processors activated (25.00 BogoMIPS). +[    0.020203] rcu:     Max phase no-delay instances is 1000. 
-[    0.004511] CPU: All CPU(s) started in SVC mode. +[    0.020980] smp: Bringing up secondary CPUs ... 
-[    0.014143] random: get_random_u32 called from 0xc0541e44 with crng_init=0 +[    0.023152] smp: Brought up 1 node, 2 CPUs 
-[    0.014199] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 +[    0.023171] SMP: Total of 2 processors activated (25.00 BogoMIPS). 
-[    0.014364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +[    0.023185] CPU: All CPU(s) started in SVC mode. 
-[    0.014392] futex hash table entries: 512 (order: 3, 32768 bytes, linear) +[    0.039780] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 
-[    0.014501] pinctrl core: initialized pinctrl subsystem +[    0.040023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
-[    0.015616] NET: Registered protocol family 16 +[    0.040060] futex hash table entries: 512 (order: 3, 32768 bytes, linear) 
-[    0.015895] DMA: preallocated 256 KiB pool for atomic coherent allocations +[    0.044945] pinctrl core: initialized pinctrl subsystem 
-[    0.017253] cpuidle: using governor ladder +[    0.047795] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
-[    0.017315] cpuidle: using governor menu +[    0.048216] DMA: preallocated 256 KiB pool for atomic coherent allocations 
-[    0.047968] usbcore: registered new interface driver usbfs +[    0.050044] thermal_sys: Registered thermal governor 'step_wise' 
-[    0.048060] usbcore: registered new interface driver hub +[    0.050733] cpuidle: using governor ladder 
-[    0.048148] usbcore: registered new device driver usb +[    0.050808] cpuidle: using governor menu 
-[    0.048204] pps_core: LinuxPPS API ver. 1 registered +[    0.087374] usbcore: registered new interface driver usbfs 
-[    0.048217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> +[    0.087445] usbcore: registered new interface driver hub 
-[    0.048250] PTP clock support registered +[    0.087517] usbcore: registered new device driver usb 
-[    0.049978] clocksource: Switched to clocksource dg_timer +[    0.087588] pps_core: LinuxPPS API ver. 1 registered 
-[    0.050788thermal_sys: Registered thermal governor 'step_wise' +[    0.087600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 
-[    0.053364NETRegistered protocol family 2 +[    0.087631] PTP clock support registered 
-[    0.053906] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) +[    0.091118] clocksource: Switched to clocksource dg_timer 
-[    0.053938] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) +[    0.101987NET: Registered PF_INET protocol family 
-[    0.053982] TCP bind hash table entries: 4096 (order: 332768 bytes, linear) +[    0.102216IP idents hash table entries8192 (order: 4, 65536 bytes, linear) 
-[    0.054037] TCP: Hash tables configured (established 4096 bind 4096) +[    0.103551] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
-[    0.054137] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) +[    0.103668] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
-[    0.054165] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) +[    0.103702] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) 
-[    0.054369] NET: Registered protocol family 1 +[    0.103738] TCP bind hash table entries: 4096 (order: 465536 bytes, linear) 
-[    0.054415] PCI: CLS 0 bytes, default 64 +[    0.103819] TCP: Hash tables configured (established 4096 bind 4096) 
-[    0.055655] workingset: timestamp_bits=30 max_order=17 bucket_order=0 +[    0.103940] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
-[    0.061524] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[    0.103972] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
-[    0.061539] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. +[    0.104711] NET: Registered PF_UNIX/PF_LOCAL protocol family 
-[    0.100925] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator +[    0.104775] PCI: CLS 0 bytes, default 64 
-[    0.101051] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator +[    0.107003] workingset: timestamp_bits=14 max_order=17 bucket_order=3 
-[    0.101175] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator +[    0.110592] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
-[    0.101442qcom-pcie 1b500000.pcihost bridge /soc/pci@1b500000 ranges: +[    0.110623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
-[    0.101466qcom-pcie 1b500000.pciParsing ranges property... +[    0.312139] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator 
-[    0.101516] qcom-pcie 1b500000.pci:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000 +[    0.312416] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator 
-[    0.101557] qcom-pcie 1b500000.pci:   MEM 0x08000000..0x0fdfffff -> 0x08000000 +[    0.312518] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator 
-[    0.325878] qcom-pcie 1b500000.pci: Link up +[    0.312779krait-cc soc:clock-controller: CPU0 800000 KHz 
-[    0.326057] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 +[    0.312812krait-cc soc:clock-controller: CPU1 @ Undefined rateForcing new rate
-[    0.326082] pci_bus 0000:00: root bus resource [bus 00-ff] +[    0.312951] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges: 
-[    0.326103pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff]) +[    0.313054] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x0000000000 
-[    0.326120] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] +[    0.313096] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000 
-[    0.326136] pci_bus 0000:00: scanning bus +[    0.313145krait-cc soc:clock-controllerCPU1 @ 384000 KHz 
-[    0.326184pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000 +[    0.313170krait-cc soc:clock-controllerL2 @ Undefined rate. Forcing new rate
-[    0.326357pci 0000:00:00.0: supports D1 +[    0.313425krait-cc soc:clock-controllerL2 @ 384000 KHz 
-[    0.326372] pci 0000:00:00.0: PME# supported from D0 D1 D3hot +[    0.314470qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator 
-[    0.326392] pci 0000:00:00.0: PME# disabled +[    0.314688qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator 
-[    0.329944pci_bus 0000:00: fixups for bus +[    0.314946qcom-pcie 1b700000.pci: supply vdda_refclk not foundusing dummy regulator 
-[    0.329967] PCI: bus0: Fast back to back transfers disabled +[    0.315294qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges
-[    0.329987] pci 0000:00:00.0: scanning [bus 01-ff] behind bridgepass 0 +[    0.315367qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0000000000 
-[    0.330127pci_bus 0000:01: scanning bus +[    0.315404qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000 
-[    0.330423] pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000 +[    0.322157gsbi 16300000.gsbino matching TCSR 
-[    0.330710] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff pref] +[    0.322189gsbi 16300000.gsbiGSBI port protocol: 6 crci: 0 
-[    0.330889pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff pref] +[    0.323835gsbi 1a200000.gsbino matching TCSR 
-[    0.330987] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x0000ffff pref] +[    0.323861gsbi 1a200000.gsbiGSBI port protocol3 crci: 0 
-[    0.331953pci 0000:01:00.0supports D1 +[    0.326443tcsr 1a400000.sysconsetting usb port select 3 
-[    0.331967pci 0000:01:00.0: PME# supported from D0 D1 D3hot +[    0.326852Serial8250/16550 driver2 ports, IRQ sharing disabled 
-[    0.332013pci 0000:01:00.0PME# disabled +[    0.328763msm_serial 16340000.serialmsm_serialdetected port #
-[    0.332271pci 0000:01:00.02.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) +[    0.328839msm_serial 16340000.serialuartclk = 7372800 
-[    0.335773pci_bus 0000:01: fixups for bus +[    0.32937116340000.serialttyMSM0 at MMIO 0x16340000 (irq = 29, base_baud = 460800) is a MSM 
-[    0.335849] PCIbus1: Fast back to back transfers disabled +[    0.329430msm_serialconsole setup on port #
-[    0.335865] pci_bus 0000:01: bus scan returning with max=01 +[    0.329538printkconsole [ttyMSM0enabled 
-[    0.335884pci 0000:00:00.0: scanning [bus 01-ff] behind bridgepass 1 +[    0.440648msm_serialdriver initialized 
-[    0.335903pci_bus 0000:00: bus scan returning with max=ff +[    0.446471] qcom-pcie 1b700000.pci: iATU: unroll F8 ob, 8 ib, align 4K, limit 4G 
-[    0.335938] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff] +[    0.551522] qcom-pcie 1b700000.pci: PCIe Gen.1 x1 link up 
-[    0.335972pci 0000:01:00.0BAR 0: assigned [mem 0x08000000-0x0800ffff pref] +[    0.555120] qcom-pcie 1b500000.pci: iATU: unroll F8 ob, 8 ib, align 4K, limit 4G 
-[    0.336028pci 0000:01:00.0BAR 2: assigned [mem 0x08010000-0x0801ffff pref] +[    0.561528] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 
-[    0.336082pci 0000:01:00.0: BAR 3: assigned [mem 0x08020000-0x0802ffff pref] +[    0.583253loopmodule loaded 
-[    0.336137pci 0000:00:00.0: PCI bridge to [bus 01-ff+[    0.587918pci_bus 0001:00root bus resource [bus 00-ff] 
-[    0.336163pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff] +[    0.628494nanddevice found, Manufacturer ID0x01, Chip ID: 0xa1 
-[    0.336369] pcieport 0000:00:00.0: assign IRQ: got 35 +[    0.632667] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff]) 
-[    0.336893] pcieport 0000:00:00.0: AER: enabled with IRQ 36 +[    0.638714] nand: AMD/Spansion S34MS01G2 
-[    0.337490] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not foundusing dummy regulator +[    0.643581] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] 
-[    0.337611] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator +[    0.651226nand128 MiB, SLC, erase size128 KiB, page size: 2048, OOB size: 64 
-[    0.337726] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not foundusing dummy regulator +[    0.661152] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 
-[    0.337995] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges+[    0.667876] 2 fixed-partitions partitions found on MTD device qcom_nand.0 
-[    0.338023qcom-pcie 1b700000.pciParsing ranges property... +[    0.672956] pci 0001:00:00.0: supports D1 
-[    0.338065qcom-pcie 1b700000.pci   IO 0x31e00000..0x31efffff -> 0x31e00000 +[    0.678658Creating 2 MTD partitions on "qcom_nand.0"
-[    0.338108] qcom-pcie 1b700000.pci  MEM 0x2e000000..0x31dfffff -> 0x2e000000 +[    0.685659] pci 0001:00:00.0: PME# supported from D0 D1 D3hot 
-   0.567397] qcom-pcie 1b700000.pci: Link up +[    0.6918500x000000000000-0x000004000000 "ubi" 
-[    0.567561qcom-pcie 1b700000.pciPCI host bridge to bus 0001:00 +[    1.124515] PCI: bus0: Fast back to back transfers disabled 
-[    0.567581] pci_bus 0001:00: root bus resource [bus 00-ff+[    1.125202] pci 0001:01:00.0: [168c:003c] type 00 class 0x028000 
-[    0.567596] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] +[    1.129742] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] 
-[    0.567609pci_bus 0001:00scanning bus +[    1.136354] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] 
-[    0.567651] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000 +[    1.143617] pci 0001:01:00.0: supports D1 D2 
-[    0.567801] pci 0001:00:00.0: supports D1 +[    1.149077] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
-[    0.567815pci 0001:00:00.0: PME# supported from D0 D1 D3hot +[    1.155085] PCI: bus1: Fast back to back transfers disabled 
-[    0.567833] pci 0001:00:00.0: PME# disabled +[    1.159798] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e2fffff] 
-[    0.571432pci_bus 0001:00: fixups for bus +[    1.165312] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] 
-[    0.571453] PCI: bus0: Fast back to back transfers disabled +[    1.172392] pci 0001:01:00.0: BAR 6: assigned [mem 0x2e200000-0x2e20ffff pref] 
-[    0.571471] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 +[    1.179293] pci 0001:00:00.0: PCI bridge to [bus 01-ff] 
-[    0.571591] pci_bus 0001:01: scanning bus +[    1.186704] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e2fffff] 
-[    0.571780] pci 0001:01:00.0: [168c:003c] type 00 class 0x028000 +[    1.193429] qcom-pcie 1b500000.pci: PCIe Gen.1 x1 link up 
-[    0.572139] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] +[    1.198887] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 
-[    0.572556] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] +[    1.204102pci_bus 0000:00: root bus resource [bus 00-ff] 
-[    0.573388] pci 0001:01:00.0: supports D1 D2 +[    1.210147pci_bus 0000:00root bus resource [io  0x0000-0xffff] 
-[    0.573403] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold +[    1.215656pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] 
-[    0.573449] pci 0001:01:00.0: PME# disabled +[    1.221916] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 
-[    0.577166] pci_bus 0001:01: fixups for bus +[    1.228782] pci 0000:00:00.0: supports D1 
-[    0.577243] PCI: bus1: Fast back to back transfers disabled +[    1.234825] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
-[    0.577259] pci_bus 0001:01: bus scan returning with max=01 +[    1.243798PCIbus0: Fast back to back transfers disabled 
-[    0.577276] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 +[    1.245033pci 0000:01:00.0: [1bb5:0008] type 00 class 0x028000 
-[    0.577292] pci_bus 0001:00: bus scan returning with max=ff +[    1.250043pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff pref
-[    0.577318] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e2fffff] +[    1.256372] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff pref
-[    0.577342] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] +[    1.262949pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x0000ffff pref
-[    0.577480] pci 0001:01:00.0: BAR 6: assigned [mem 0x2e200000-0x2e20ffff pref] +[    1.270818pci 0000:01:00.0: supports D1 
-[    0.577498] pci 0001:00:00.0: PCI bridge to [bus 01-ff] +[    1.276167pci 0000:01:00.0: PME# supported from D0 D1 D3hot 
-[    0.577518] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e2fffff] +[    1.280561pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidthlimited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) 
-[    0.577709] pcieport 0001:00:00.0: assign IRQ: got 37 +[    1.286736PCIbus1Fast back to back transfers disabled 
-[    0.578367] pcieport 0001:00:00.0: AER: enabled with IRQ 38 +[    1.300678pci 0000:00:00.0BAR 8: assigned [mem 0x08000000-0x080fffff] 
-[    0.578964] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda not found, using dummy regulator +[    1.306001pci 0000:01:00.0BAR 0: assigned [mem 0x08000000-0x0800ffff pref] 
-[    0.579086] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_phy not found, using dummy regulator +[    1.313053pci 0000:01:00.0: BAR 2: assigned [mem 0x08010000-0x0801ffff pref
-[    0.579188qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_refclk not found, using dummy regulator +[    1.320043pci 0000:01:00.0BAR 3: assigned [mem 0x08020000-0x0802ffff pref] 
-[    0.579446qcom-pcie 1b900000.pcihost bridge /soc/pci@1b900000 ranges+[    1.327346pci 0000:00:00.0PCI bridge to [bus 01-ff
-[    0.579470qcom-pcie 1b900000.pci: Parsing ranges property... +[    1.334486pci 0000:00:00.0  bridge window [mem 0x08000000-0x080fffff] 
-[    0.579512qcom-pcie 1b900000.pci:    IO 0x35e00000..0x35efffff -> 0x35e00000 +[    1.340825pcieport 0001:00:00.0: AER: enabled with IRQ 33 
-[    0.579548qcom-pcie 1b900000.pci:   MEM 0x32000000..0x35dfffff -> 0x32000000 +[    1.348868pcieport 0000:00:00.0: AER: enabled with IRQ 35 
-[    1.729990qcom-pcie 1b900000.pci: Phy link never came up +[    1.4922550x000004000000-0x000008000000 : "extra
-[    1.731998qcom-pcie 1b900000.pcicannot initialize host +[    1.676428] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 
-[    1.732373qcom-pcieprobe of 1b900000.pci failed with error -110 +[    1.676676] m25p80@0 enforce active low on GPIO handle 
-[    1.734653L2 @ QSB rateForcing new rate. +[    1.686676] spi-nor spi0.0: mx25u3235f (4096 Kbytes) 
-   1.734881L2 @ 384000 KHz +[    1.687931] 15 fixed-partitions partitions found on MTD device spi0.0 
-[    1.735064CPU0 @ 800000 KHz +[    1.692890] Creating 15 MTD partitions on "spi0.0": 
-[    1.735078CPU1 @ QSB rateForcing new rate. +[    1.699071] 0x000000000000-0x000000010000 : "0:sbl1
-   1.735207CPU1 @ 384000 KHz +[    1.704930] 0x000000010000-0x000000030000 : "0:mibib
-[    1.738963gsbi 16300000.gsbiGSBI port protocol: 6 crci: 0 +[    1.709892] 0x000000030000-0x000000050000 : "0:sbl2
-[    1.739660gsbi 1a200000.gsbiGSBI port protocol: 3 crci: 0 +[    1.714961] 0x000000050000-0x000000080000 : "0:sbl3
-[    1.741208Serial8250/16550 driver, 2 ports, IRQ sharing disabled +[    1.719846] 0x000000080000-0x000000090000 : "0:ddrconfig
-[    1.742019msm_serial 16340000.serialmsm_serialdetected port #0 +[    1.724920] 0x000000090000-0x0000000a0000 : "0:ssd
-[    1.742072msm_serial 16340000.serialuartclk = 7372800 +[    1.730128] 0x0000000a0000-0x0000000d0000 : "0:tz
-[    1.74214316340000.serialttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM +[    1.734937] 0x0000000d0000-0x0000000f0000 : "0:rpm
-[    1.742180msm_serialconsole setup on port #0 +[    1.739666] 0x0000000f0000-0x000000130000 : "0:oldappsbl
-[    2.630565] printkconsole [ttyMSM0enabled +[    1.744591] 0x000000130000-0x000000170000 : "0:appsblenv
-[    2.635571msm_serialdriver initialized +[    1.750001] 0x000000170000-0x000000190000 : "0:ART" 
-[    2.644505] loopmodule loaded +[    1.755524] 0x000000190000-0x0000001e0000 : "0:uboot
-[    2.645841nanddevice found, Manufacturer ID0x2c, Chip ID0xa1 +[    1.760142] 0x0000001e0000-0x000000200000 : "0:oldnss1
-   2.646624nand: Micron MT29F1G08ABBDAH4 +[    1.765359] 0x000000200000-0x000000220000 : "0:nvram
-[    2.653323nand128 MiB, SLC, erase size128 KiB, page size: 2048, OOB size64 +[    1.770345] 0x000000220000-0x000000400000 : "0:oldkernel
-[    2.6571731 fixed-partitions partitions found on MTD device qcom_nand.0 +[    1.817014] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found 
-[    2.664686Creating 1 MTD partitions on "qcom_nand.0"+[    1.817088] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found 
-[    2.6715350x000000000000-0x000008000000 : "ubi+[    1.823683] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock 
-[    2.684598] random: fast init done +[    1.830565] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37 
-[    3.184954] random: crng init done +[    1.836260] ipq806x-gmac-dwmac 37200000.ethernet:    DWMAC1000 
-[    4.135759] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 +[    1.843665] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported 
-[    4.141447] spi-nor spi0.0: mx25u3235f (4096 Kbytes) +[    1.849380] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported 
-[    4.141976] 15 qcom-smem partitions found on MTD device spi0.0 +[    1.857219] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2 
-[    4.146922] Creating 15 MTD partitions on "spi0.0": +[    1.865082] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported 
-[    4.152676] 0x000000000000-0x000000010000 : "0:SBL1+[    1.870817] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported 
-[    4.158782] 0x000000010000-0x000000030000 : "0:MIBIB+[    1.878303] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors 
-[    4.163927] 0x000000030000-0x000000050000 : "0:SBL2+[    1.885033] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors 
-[    4.168762] 0x000000050000-0x000000080000 : "0:SBL3+[    1.892595] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled 
-[    4.173898] 0x000000080000-0x000000090000 : "0:DDRCONFIG+[    1.899548] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer 
-[    4.178766] 0x000000090000-0x0000000a0000 : "0:SSD+[    1.905820] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address 12:a1:0f:ab:11:1c 
-[    4.184135] 0x0000000a0000-0x0000000d0000 : "0:TZ+[    1.917781] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found 
-[    4.188722] 0x0000000d0000-0x0000000f0000 : "0:RPM+[    1.922219] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found 
-[    4.193716] 0x0000000f0000-0x000000130000 : "0:OLDAPPSBL+[    1.929683] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock 
-[    4.198378] 0x000000130000-0x000000170000 : "0:APPSBLENV+[    1.936411] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37 
-[    4.204039] 0x000000170000-0x000000190000 : "0:ART" +[    1.942392] ipq806x-gmac-dwmac 37400000.ethernet:    DWMAC1000 
-[    4.209328] 0x000000190000-0x0000001e0000 : "0:APPSBL+[    1.949722] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported 
-[    4.214139] 0x0000001e0000-0x000000200000 : "0:NSS1+[    1.955687] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported 
-[    4.219204] 0x000000200000-0x000000220000 : "0:NVRAM+[    1.963366] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2 
-[    4.224454] 0x000000220000-0x000000400000 : "0:HLOS+[    1.971161] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported 
-[    4.231406] libphy: ipq8064_mdio_bus: probed +[    1.977067] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported 
-[    4.283114] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii +[    1.984439] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors 
-[    5.384612] libphy: Fixed MDIO Bus: probed +[    1.991131] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors 
-[    5.385625] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found +[    1.998778] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled 
-[    5.387620] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found +[    2.005776] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer 
-[    5.395255] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock +[    2.011973] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 3a:b8:e0:99:1b:28 
-[    5.402184] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37 +[    2.023893i2c_dev: i2c /dev entries driver 
-[    5.407763] ipq806x-gmac-dwmac 37200000.ethernet:    DWMAC1000 +[    2.034214] sdhci: Secure Digital Host Controller Interface driver 
-[    5.415335] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported +[    2.034267] sdhci: Copyright(c) Pierre Ossman 
-[    5.421129] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported +[    2.039307] sdhci-pltfm: SDHCI platform and OF driver helper 
-[    5.428763] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2 +[    2.048959] NET: Registered PF_INET6 protocol family 
-[    5.436763] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported +[    2.051990] Segment Routing with IPv6 
-[    5.442559] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported +[    2.054453] In-situ OAM (IOAM) with IPv6 
-[    5.449858] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors +[    2.058072] NET: Registered PF_PACKET protocol family 
-[    5.456710] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors +[    2.062498] 8021q: 802.1Q VLAN Support v1.8 
-[    5.464271] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled +[    2.066964] Registering SWP/SWPB emulation handler 
-[    5.471299] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer +[    2.116320] qcom_rpm 108000.rpm: RPM firmware 3.0.16777338 
-[    5.477390] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address fa:49:36:39:6b:57 +[    2.129372] s1a: Bringing 0uV into 1050000-1050000uV 
-[    5.487500] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found +[    2.129809] s1b: Bringing 0uV into 1050000-1050000uV 
-[    5.493894] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found +[    2.133854] s2a: Bringing 0uV into 800000-800000uV 
-[    5.501375] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock +[    2.138724s2b: Bringing 0uV into 800000-800000uV 
-[    5.507868] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37 +[    2.351107qca8k 37000000.mdio-mii:10: configuring for fixed/rgmii link mode 
-[    5.514051] ipq806x-gmac-dwmac 37400000.ethernet:    DWMAC1000 +[    2.360769qca8k 37000000.mdio-mii:10: Link is Up 1Gbps/Full - flow control off 
-[    5.521473] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported +[    2.366506qca8k 37000000.mdio-mii:10: configuring for fixed/sgmii link mode 
-[    5.527200] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported +[    2.379190qca8k 37000000.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off 
-[    5.535043] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2 +[    2.485978qca8k 37000000.mdio-mii:10 lan1 (uninitialized)PHY [qca8k-0.0:00] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.542901] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported +[    2.605844qca8k 37000000.mdio-mii:10 lan2 (uninitialized)PHY [qca8k-0.0:01] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL
-[    5.548640] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported +[    2.715936qca8k 37000000.mdio-mii:10 lan3 (uninitialized)PHY [qca8k-0.0:02] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.556115] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors +[    2.825929qca8k 37000000.mdio-mii:10 lan4 (uninitialized)PHY [qca8k-0.0:03] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.562894] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors +[    2.935925qca8k 37000000.mdio-mii:10 wan (uninitialized)PHY [qca8k-0.0:04] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL) 
-[    5.570423] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled +[    2.937293] ipq806x-gmac-dwmac 37200000.ethernet eth0entered promiscuous mode 
-[    5.577370] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer +[    2.947340ipq806x-gmac-dwmac 37400000.ethernet eth1entered promiscuous mode 
-[    5.583649] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address b6:c3:1d:f8:f4:4b +[    2.954195DSAtree 0 setup 
-[    5.593817] i2c /dev entries driver +[    2.971505thermal thermal_zone0failed to read out thermal zone (-110) 
-[    5.603512] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations +[    2.988039UBIauto-attach mtd0 
-[    5.603843] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations +[    2.988067] ubi0: attaching mtd0 
-[    5.611712] sdhci: Secure Digital Host Controller Interface driver +[    3.241488] random: crng init done 
-[    5.617904] sdhci: Copyright(c) Pierre Ossman +[    3.997043] ubi0: scanning is finished 
-[    5.624251] sdhci-pltfm: SDHCI platform and OF driver helper +[    4.016892] ubi0: attached mtd0 (name "ubi", size 64 MiB) 
-[    5.632107] NET: Registered protocol family 10 +[    4.016918] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
-[    5.637370] Segment Routing with IPv6 +[    4.021268] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
-[    5.638715] NET: Registered protocol family 17 +[    4.028095] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
-[    5.643581] 8021q: 802.1Q VLAN Support v1.8 +[    4.034959] ubi0: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0 
-[    5.646686] Registering SWP/SWPB emulation handler +[    4.041737] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 
-[    5.683177] qcom_rpm 108000.rpm: RPM firmware 3.0.16777338 +[    4.047917] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1718782863 
-[    5.708566] s1a: supplied by regulator-dummy +[    4.055014] ubi0: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 20 
-[    5.708705] s1a: Bringing 0uV into 1050000-1050000uV +[    4.064356] ubi0: background thread "ubi_bgt0d" started, PID 71 
-[    5.712506] s1b: supplied by regulator-dummy +[    4.065593] block ubiblock0_1: created from ubi0:1(rootfs) 
-[    5.716958] s1b: Bringing 0uV into 1050000-1050000uV +[    4.079079ubiblock: device ubiblock0_1 (rootfsset to be root fi▒[    4.097149] VFS: Mounted root (squashfs filesystem) readonly on device 254:0
-[    5.721635] s2a: supplied by regulator-dummy +[    4.097815] Freeing unused kernel image (initmem) memory: 1024K 
-[    5.726150s2a: Bringing 0uV into 800000-800000uV +[    4.103435] Run /sbin/init as init process 
-[    5.730838s2b: supplied by regulator-dummy +[    4.535346] init: Console is alive 
-[    5.735025s2bBringing 0uV into 800000-800000uV +[    4.535512] init: - watchdog - 
-[    5.741788Speed bin0 +   5.921881] kmodloader: loading kernel modules from /etc/modules-boot.d/
-[    5.743933PVS bin2 +[    5.970230gpio_button_hotplugloading out-of-tree module taints kernel
-[    5.748893core_opp_supported_by_regulatorsOPP minuV995000 maxuV: 995000, not supported by regulator +[    5.977345] SCSI subsystem initialized 
-[    5.748951cpu cpu0_opp_addOPP not supported by regulators (800000000+   6.107489] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
-[    5.759853cpufreqcpufreq_onlineCPU0Running at unlisted freq: 800000 KHz +   6.107537] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 
-[    5.765725cpufreqcpufreq_onlineCPU0Unlisted initial frequency changed to: 1000000 KHz +   6.112109] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002000010 
-[    5.774260core_opp_supported_by_regulatorsOPP minuV995000 maxuV995000, not supported by regulator +   6.119459] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0x10000000 
-[    5.781459cpu cpu1: _opp_addOPP not supported by regulators (800000000) +   6.129038] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller 
-[    5.798718UBIauto-attach mtd0 +   6.134772] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 
-[    5.798742ubi0default fastmap pool size: 50 +   6.140261] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed 
-[    5.801415ubi0default fastmap WL pool size: 25 +   6.148379] hub 1-0:1.0: USB hub found 
-[    5.805652] ubi0: attaching mtd0 +[    6.154502] hub 1-0:1.0: 1 port detected 
-[    7.388215] ubi0: scanning is finished +[    6.158465] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    7.410482] ubi0: attached mtd0 (name "ubi", size 128 MiB) +   6.163528] hub 2-0:1.0: USB hub found 
-[    7.410502] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes +   6.170311] hub 2-0:1.0: 1 port detected 
-[    7.414850] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 +   6.174228] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    7.421788] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 +   6.177936] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 
-[    7.428566] ubi0: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0 +   6.183409] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002000010 
-[    7.435411] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 +   6.190808] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0x11000000 
-[    7.441652] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1594422558 +   6.200364] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller 
-[    7.448710] ubi0: available PEBs: 495, total reserved PEBs: 529, PEBs reserved for bad PEB handling: 20 +   6.206116] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 
-[    7.458886] mtd: device 17 (rootfs) set to be root filesystem +   6.211673] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed 
-[    7.459038] ubi0: background thread "ubi_bgt0d" started, PID 64 +   6.219630] hub 3-0:1.0: USB hub found 
-[    7.468717] block ubiblock0_1: created from ubi0:1(rootfs) +[    6.225858] hub 3-0:1.0: 1 port detected 
-[    7.478785hctosysunable to open rtc device (rtc0) +[    6.229787] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
-[    7.498199] VFS: Mounted root (squashfs filesystem) readonly on device 31:17+   6.234522] hub 4-0:1.0: USB hub found 
-[    7.500513] Freeing unused kernel memory: 1024K +   6.241716] hub 4-0:1.0: 1 port detected 
-[    7.532254] Run /sbin/init as init process +   6.249014] usbcore: registered new interface driver usb-storage 
-[    8.510987] init: Console is alive +   6.249468] kmodloader: done loading kernel modules from /etc/modules-boot.d/
-[    8.511114] init: - watchdog - +   6.261898] init: - preinit - 
-  11.976623] kmodloader: loading kernel modules from /etc/modules-boot.d/+   8.062010] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 
-  12.009925] raid6: using algorithm neonx8 gen() 0 MB/s +[    8.062816] dwmac1000: Master AXI performs any burst length 
-[   12.009956] raid6: .... xor() 0 MB/s, rmw enabled +   8.069173] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found 
-[   12.014061] raid6: using neon recovery algorithm +   8.084570] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported 
-[   12.019966] xor: measuring software checksum speed +   8.084714] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock 
-[   12.120350]    arm4regs  :  1061.600 MB/sec +   8.098699] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode 
-[   12.220349   8regs       672.800 MB/sec +   8.099557] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off 
-  12.320349]    32regs    :   668.400 MB/sec +   8.113784qca8k 37000000.mdio-mii:10 lan1configuring for phy/internal link mode 
-[   12.420343]    neon      :  2446.000 MB/sec +Press the [fkey and hit [enter] to enter failsafe mode 
-[   12.420366] xor: using function: neon (2446.000 MB/sec) +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
-[   12.641377] Btrfs loaded, crc32c=crc32c-generic +[   10.382306] mount_root: loading kmods from internal overlay 
-[   12.655687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +[   10.401025] kmodloader: loading kernel modules from //etc/modules-boot.d/
-[   12.658601] SCSI subsystem initialized +[   10.403250] kmodloader: done loading kernel modules from //etc/modules-boot.d/
-  12.666407] libata version 3.00 loaded. +[   12.102890block: attempting to load /tmp/overlay/upper/etc/config/fstab 
-[   12.669630] ehci-fsl: Freescale EHCI Host controller driver +[   12.102990] block: unable to load configuration (fstabEntry not found) 
-[   12.670139] ehci-platform: EHCI generic platform driver +[   12.108692] blockattempting to load /tmp/overlay/etc/config/fstab 
-[   12.677474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver +[   12.115558] block: unable to load configuration (fstab: Entry not found) 
-[   12.679577] ohci-platform: OHCI generic platform driver +[   12.121534] block: attempting to load /etc/config/fstab 
-[   12.688165] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found +[   12.133663] block: unable to load configuration (fstab: Entry not found) 
-[   12.690669] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found +[   12.133718] block: no usable configuration 
-[   12.696485] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found +[   12.145265] UBIFS (ubi0:2): Mounting in unauthenticated mode 
-[   12.702637] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found +[   12.145676] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 189 
-[   12.710160] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found +[   12.254488] UBIFS (ubi0:2): recovery needed 
-[   12.714195] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found +[   12.490637] UBIFS (ubi0:2): recovery completed 
-[   12.719922] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found +[   12.490732] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" 
-[   12.726071] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found +[   12.494054] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
-[   12.742963] dwc3 11000000.dwc3: Failed to get clk 'ref': -2 +[   12.501977] UBIFS (ubi0:2): FS size: 39870464 bytes (38 MiB, 314 LEBs), max 324 LEBs, journal size 2031616 bytes (MiB, 16 LEBs) 
-[   12.791328] dwc3 10000000.dwc3: Failed to get clk 'ref': -2 +[   12.511844] UBIFS (ubi0:2): reserved for root: 1883180 bytes (1839 KiB) 
-[   12.854320] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[   12.523474] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 567E20DA-722C-4FF3-B009-41295EF11E61, small LPT model 
-  12.854381] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 +[   12.533700] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
-  12.858917] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010 +[   12.553598] block: extroot: not configured 
-  12.866407] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0x11000000 +[   12.553743] UBIFS (ubi0:2): un-mount UBI device 0 
-  12.876643] hub 1-0:1.0: USB hub found +[   12.556700] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops 
-[   12.881623] hub 1-0:1.0: 1 port detected +[   12.566974] UBIFS (ubi0:2): Mounting in unauthenticated mode 
-[   12.885565] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller +[   12.567536] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 190 
-  12.889441] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 +[   12.804941] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" 
-  12.894798] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed +[   12.804972] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
-  12.903115] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. +[   12.811812] UBIFS (ubi0:2): FS size: 39870464 bytes (38 MiB, 314 LEBs), max 324 LEBs, journal size 2031616 bytes (MiB, 16 LEBs) 
-  12.909239] hub 2-0:1.0: USB hub found +[   12.821716] UBIFS (ubi0:2): reserved for root: 1883180 bytes (1839 KiB) 
-  12.917212] hub 2-0:1.0: 1 port detected +[   12.833329] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 567E20DA-722C-4FF3-B009-41295EF11E61, small LPT model 
-  12.922097] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   14.393804] block: attempting to load /tmp/overlay/upper/etc/config/fstab 
-  12.924771] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 +[   14.404454] block: extroot: not configured 
-  12.930191] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010 +[   14.407265] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
-  12.937713] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0x10000000 +[   14.407614] block: extroot: not configured 
-  12.948844] hub 3-0:1.0: USB hub found +[   14.419352mount_rootswitching to ubifs overlay 
-[   12.952982] hub 3-0:1.0: 1 port detected +[   14.440611] urandom-seed: Seeding with /etc/urandom.seed 
-[   12.956885] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller +[   14.538508procd- early - 
-  12.960865] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 +[   14.538624] procd- watchdog - 
-  12.966082] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed +[   15.137414procd- watchdog - 
-  12.973777] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. +[   15.213528procd- ubus - 
-  12.980608] hub 4-0:1.0: USB hub found +[   15.591612procd- init - 
-  12.988488] hub 4-0:1.0: 1 port detected +Please press Enter to activate this console. 
-  12.994406] usbcore: registered new interface driver usb-storage +[   17.101950urngdv1.0.2 started
-  12.996203] kmodloader: done loading kernel modules from /etc/modules-boot.d/+[   17.157490kmodloaderloading kernel modules from /etc/modules.d/* 
-  13.006292] init: - preinit - +[   17.210433] tun: Universal TUN/TAP device driver, 1.6 
-  15.917227] dwmac1000: Master AXI performs any burst length +[   17.236821] GACT probability on 
-  15.917274] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found +[   17.237518] Mirror/redirect action on 
-  15.921738] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported +[   17.243163] u32 classifier 
-  15.929791] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock +[   17.243186]     input device check on 
-  15.938733] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode +[   17.245190]     Actions configured 
-  15.946812] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off +[   17.261395] fuse: init (API version 7.39
-  15.946868IPv6ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready +[   17.272038Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 
-  19.085301Starting lvm2 during preinit +[   17.272073] Backport generated by backports.git 193becf2 
-  21.089217device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com +[   17.319596] xt_timekernel timezone is -0000 
-[   21.429213] mount_root: loading kmods from internal overlay +[   17.457958PPP generic driver version 2.4.2 
-[   21.460100] kmodloader: loading kernel modules from //etc/modules-boot.d/+[   17.458824] NETRegistered PF_PPPOX protocol family 
-[   21.463681] kmodloader: done loading kernel modules from //etc/modules-boot.d/+[   17.533465ath10k 6.7 driver, optimized for CT firmware, probing pci device0x3c. 
-[   23.188074UBIFS (ubi0:2): default file-system created +[   17.551687ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) 
-[   23.189798] UBIFS (ubi0:2): Mounting in unauthenticated mode +[   17.552293ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 
-[   23.193356] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 157 +[   61.237892] ath10k_pci 0001:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 
-[   23.453765] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" +[   61.237934] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 
-[   23.453808] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes +[   61.246842] ath10k_pci 0001:01:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f 
-[   23.460685] UBIFS (ubi0:2): FS size: 44314624 bytes (42 MiB, 349 LEBs), journal size 2158592 bytes (MiB, 17 LEBs) +[   61.470080ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 
-[   23.470572] UBIFS (ubi0:2): reserved for root: 2093089 bytes (2044 KiB) +[   62.333135] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 
-[   23.480792] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 66F4BC49-4029-4011-AA8E-82C7DCAB48CE, small LPT model +[   62.343396] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410' 
-[   23.489420] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab +[   62.343455] ath10k_pci 0001:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' 
-[   23.499073] block: unable to load configuration (fstabEntry not found) +[   62.348520ath10k_pci 0001:01:00.0: wmi print 'alloc rem: 24984 iram: 38672' 
-[   23.505706] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab +[   62.422931] ath10k_pci 0001:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 
-[   23.512807] block: unable to load configuration (fstab: Entry not found) +[   62.423286] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000 
-[   23.518882] block: attempting to load /etc/config/fstab +[   62.538593] kmodloader: done loading kernel modules from /etc/modules.d/
-[   23.526369] block: unable to load configuration (fstab: Entry not found) +[   69.970638ipq806x-gmac-dwmac 37200000.ethernet eth0Link is Down 
-[   23.530658] block: no usable configuration +[   70.007982ipq806x-gmac-dwmac 37200000.ethernet eth0Register MEM_TYPE_PAGE_POOL RxQ-0 
-[   23.544934] UBIFS (ubi0:2): un-mount UBI device 0 +[   70.008976dwmac1000: Master AXI performs any burst length 
-[   23.545917] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops +[   70.015285ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found 
-[   23.553591] UBIFS (ubi0:2): Mounting in unauthenticated mode +[   70.030508] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported 
-[   23.555724] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 158 +[   70.030662] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock 
-[   23.739886] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" +[   70.038447ipq806x-gmac-dwmac 37200000.ethernet eth0configuring for fixed/rgmii link mode 
-[   23.739925] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes +[   70.045418] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off 
-[   23.746811] UBIFS (ubi0:2): FS size: 44314624 bytes (42 MiB, 349 LEBs), journal size 2158592 bytes (MiB, 17 LEBs) +[   70.111027ipq806x-gmac-dwmac 37400000.ethernet eth1Register MEM_TYPE_PAGE_POOL RxQ-0 
-[   23.756679] UBIFS (ubi0:2): reserved for root: 2093089 bytes (2044 KiB) +[   70.111916] dwmac1000: Master AXI performs any burst length 
-[   23.766916] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 66F4BC49-4029-4011-AA8E-82C7DCAB48CE, small LPT model +[   70.118267ipq806x-gmac-dwmac 37400000.ethernet eth1No Safety Features support found 
-[   25.615772] ubi0 error: 0xc06599b0: cannot open device 0, volume 2, error -16 +[   70.133595] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported 
-[   25.615827] ubi0 error: 0xc06599b0: cannot open device 0, volume 2, error -16 +[   70.133776ipq806x-gmac-dwmac 37400000.ethernet eth1registered PTP clock 
-[   26.985704] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab +[   70.142292] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode 
-[   26.985790] block: unable to load configuration (fstabEntry not found) +[   70.148709ipq806x-gmac-dwmac 37400000.ethernet eth1Link is Up - 1Gbps/Full - flow control off 
-[   26.991577] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab +[   70.158198] qca8k 37000000.mdio-mii:10 lan1: configuring for phy/internal link mode 
-[   26.998474] block: unable to load configuration (fstabEntry not found) +[   70.241284br-lan: port 1(lan1) entered blocking state 
-[   27.004863blockattempting to load /etc/config/fstab +[   70.241393] br-lan: port 1(lan1entered disabled state 
-[   27.011632blockunable to load configuration (fstabEntry not found) +[   70.245427] qca8k 37000000.mdio-mii:10 lan1: entered allmulticast mode 
-[   27.016494blockno usable configuration +[   70.250655] ipq806x-gmac-dwmac 37400000.ethernet eth1: entered allmulticast mode 
-[   27.025178mount_rootoverlay filesystem has not been fully initialized yet +[   70.263581qca8k 37000000.mdio-mii:10 lan1: entered promiscuous mode 
-[   27.027536mount_rootswitching to ubifs overlay +[   70.309581qca8k 37000000.mdio-mii:10 lan2: configuring for phy/internal link mode 
-[   27.066857overlayfsupper fs does not support xattr, falling back to index=off and metacopy=off+[   70.320816br-lan: port 2(lan2) entered blocking state 
-[   27.072508urandom-seedSeed file not found (/etc/urandom.seed+[   70.320853br-lan: port 2(lan2) entered disabled state 
-[   27.112552ipq806x-gmac-dwmac 37400000.ethernet eth1Link is Down +[   70.325005qca8k 37000000.mdio-mii:10 lan2: entered allmulticast mode 
-[   27.161181procd- early - +[   70.344729qca8k 37000000.mdio-mii:10 lan2: entered promiscuous mode 
-[   27.161333procd- watchdog - +[   70.434819qca8k 37000000.mdio-mii:10 lan3: configuring for phy/internal link mode 
-[   27.732439procd: - watchdog - +[   70.435214br-lanport 3(lan3) entered blocking state 
-[   27.732704procd: - ubus +[   70.441421] br-lan: port 3(lan3entered disabled state 
-[   27.795801procdinit - +[   70.446529qca8k 37000000.mdio-mii:10 lan3: entered allmulticast mode 
-[   28.127652urngdv1.0.2 started+[   70.467727qca8k 37000000.mdio-mii:10 lan3: entered promiscuous mode 
-[   28.134320] kmodloader: loading kernel modules from /etc/modules.d/+[   70.616148qca8k 37000000.mdio-mii:10 lan4: configuring for phy/internal link mode 
-[   28.148232NETRegistered protocol family 38 +[   70.616557br-lan: port 4(lan4) entered blocking state 
-[   28.153981FS-CacheLoaded +[   70.622745br-lanport 4(lan4) entered disabled state 
-[   28.157294Key type dns_resolver registered +[   70.627986qca8k 37000000.mdio-mii:10 lan4entered allmulticast mode 
-[   28.164736Key type cifs.idmap registered +[   70.676895] qca8k 37000000.mdio-mii:10 lan4entered promiscuous mode 
-[   28.175300RPCRegistered named UNIX socket transport module+[   70.717193qca8k 37000000.mdio-mii:10 wan: configuring for phy/internal link mode 
-[   28.175322RPCRegistered udp transport module+[   73.848567qca8k 37000000.mdio-mii:10 lan3Link is Up 1Gbps/Full - flow control off 
-[   28.180014RPCRegistered tcp transport module+[   73.848626] br-lanport 3(lan3) entered blocking state 
-[   28.184956RPCRegistered tcp NFSv4.1 backchannel transport module+[   73.855457br-lanport 3(lan3) entered forwarding state 
-[   28.194653tunUniversal TUN/TAP device driver, 1.6 + 
-[   28.210514Installing knfsd (copyright (C1996 okir@monad.swb.de)+root@OpenWrt:~# df -h 
-[   28.215579NFSRegistering the id_resolver key type +Filesystem                Size      Used Available Use% Mounted on 
-[   28.215941Key type id_resolver registered +/dev/root                16.5M     16.5M         100% /rom 
-[   28.220954Key type id_legacy registered +tmpfs                   232.1M      3.9M    228.2M   2% /tmp 
-[   28.236993Mirror/redirect action on +/dev/ubi0_2              34.5M    176.0K     32.5M   1% /overlay 
-[   28.240169u32 classifier +overlayfs:/overlay       34.5M    176.0K     32.5M   1% / 
-[   28.240184    input device check on +tmpfs                   512.0K            512.0K   0% /dev 
-[   28.242323    Actions configured + 
-[   28.261510fuseinit (API version 7.31+root@OpenWrt:~# mount 
-[   28.264404Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056 +/dev/root on /rom type squashfs (ro,relatime,errors=continue) 
-[   28.264495Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb +proc on /proc type proc (rw,nosuid,nodev,noexec,noatime) 
-[   28.349020xt_time: kernel timezone is -0000 +sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime) 
-[   28.389221PPP generic driver version 2.4.2 +cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate) 
-[   28.390520NETRegistered protocol family 24 +tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime) 
-[   28.420944ath10k_pci 0001:01:00.0assign IRQgot 37 +/dev/ubi0_2 on /overlay type ubifs (rw,noatime,assert=read-only,ubi=0,vol=2
-[   28.420967ath10k 5.4 driver, optimized for CT firmware, probing pci device0x3c. +overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work) 
-[   28.421023ath10k_mac_create, priv_size868  hw37b53e8d  hw->privab0078a2 +tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755) 
-[   28.437075ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142+devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000) 
-  28.437182] ath10k_pci 0001:01:00.0: enabling bus mastering+debugfs on /sys/kernel/debug type debugfs (rw,noatime) 
 +bpffs on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700) 
 + 
 +root@OpenWrt:~# free 
 +              total        used        free      shared  buff/cache   available 
 +Mem:         475432       43288      372860        4008       59284      380376 
 + 
 +root@OpenWrt:~# cat /proc/cpuinfo 
 +processor       : 0 
 +model name      : ARMv7 Processor rev 0 (v7l) 
 +BogoMIPS        : 21.87 
 +Features        half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 
 +CPU implementer 0x51 
 +CPU architecture:
 +CPU variant     : 0x2 
 +CPU part        : 0x04d 
 +CPU revision    : 0 
 + 
 +processor       : 1 
 +model name      : ARMv7 Processor rev 0 (v7l) 
 +BogoMIPS        : 45.57 
 +Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 
 +CPU implementer : 0x51 
 +CPU architecture:
 +CPU variant     : 0x2 
 +CPU part        : 0x04d 
 +CPU revision    : 0 
 + 
 +Hardware        Generic DT based system 
 +Revision        : 0000 
 +Serial          : 0000000000000000 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
 +
  
 ===== Notes ===== ===== Notes =====
-Possible non invasive recovery method+  * OpenWrt forum thread[[https://forum.openwrt.org/t/e8350-why-not-supported-by-openwrt/57640]] 
-(return to original firmware)+  * Pull request for a current release: [[https://github.com/openwrt/openwrt/pull/15798]] 
 +  * Test builds with 5GHz radio support:\\ v20: [[https://github.com/SergeyFilippov/openwrt/releases/tag/v20.e8350-snapshot]] \\ v22: [[https://github.com/SergeyFilippov/openwrt/releases/tag/v22.03-release-qtn]] 
 +      * Flash it over the native Linksys WEB interface. 
 +      * **5GHz wifi** configuration is done manually via editing the /etc/rc.local file.\\ (LuCI web interface does not know how to properly handle quantenna driver at the moment) 
 +  * Test builds with **LUCI** from official snapshot image builder with pinned kmods, **no 5GHz radio**:\\ v24: [[https://github.com/SergeyFilippov/openwrt/releases/tag/v24.0.0-beta-snapshot]]
  
-1.  Power off the device\\ 
-2.  Press & hold the "Reset" button\\ 
-3.  Power on the deiece & wait for 10 seconds with pressed "Reset" button.The Router will open Firmware Recovery "http" server on IP: 192.168.1.1\\ 
-4.    Set IP on your PC from 192.168.1.0/24 network ( Router is on IP 192.168.1.1 )\\ 
-5.    Open in browser URL:  http://192.168.1.1/index.shtml\\ 
--    Firmware Recovery -> File Name -> Recovery & Reboot 
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG unsupported}}+{{tag>ipq806x IPQ8064 128NAND 512RAM 5port GigabitEthernet QSR1000 2core 802.11abgnac 2USB USB2.0 USB3.0 eSATA WiP}}
  • Last modified: 2024/10/04 03:44
  • by jeremynd01