Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:d-link:d-link_dap-1620 [2024/11/18 02:55] – [OpenWrt 23.05] senduraiinbox:toh:d-link:d-link_dap-1620 [2024/12/12 13:30] – Rev B raenye
Line 1: Line 1:
 ====== D-Link DAP-1620 ====== ====== D-Link DAP-1620 ======
  
-The **D-Link DAP-1620** is a dual-band Wi-Fi range extender.+The **D-Link DAP-1620** is a dual-band Wi-Fi range extender. It has two hardware revisions: A and B, with a common outer shell, but substantially different hardware (see below). 
 +Since it is powered by mains, there are regional variants of the shell (US, EU, UK, maybe others) but the firmware and the internals are not affected by this (the same 100-240V AC to 12V 0.75A DC converter is used). 
 + 
 +Revision A is marketed as AC1200 (=300+866), whereas revision B is marketed as AC1300 (=400+866).
  
 ====== OpenWrt support ====== ====== OpenWrt support ======
  
-<color #ed1c24>**Not supported.**</color>+  * Revision A support should be available after [[https://github.com/openwrt/openwrt/pull/17027|#17027]] is merged. 
 +  Revision B is supported since release 23.05 (see [[commit>e4c7703d2]]). 
  
 ====== Hardware ====== ====== Hardware ======
  
-^ H/W rev. ^ CPU ^ Flash ^ RAM ^ Wi-Fi chip ^ 2.4 GHz ^ 5 GHz ^ Ethernet ports ^ USB ^ Serial ^ LEDs ^ Buttons ^ +^ H/W rev.  ^ CPU                   ^ Flash   ^ RAM      ^ Wi-Fi chip             ^ 2.4 GHz        ^ 5 GHz          ^ Ethernet ports        ^ USB  ^ Serial  ^ LEDs  ^ Buttons  
-| A1/A2 | MT7620A @ 580 MHz | 8 MiB | 64 MiB | MT7612E (2T2R) | Yes, b/g/n/ac | Yes, b/g/n/ac | 1 x RTL8211E Gigabit | No | Yes | 4 | 2 | +| A1/A2     | MT7620A @ 580 MHz     | 8 MiB   | 64 MiB   | MT7612E (2T2R)         | Yes, b/g/n     | Yes, b/g/n/ac  | 1 x RTL8211E Gigabit  | No   | Yes     | 4     | 2        | 
 +| B1        | MT7621AT @ 2x880 MHz  | 16 MiB  | 128 MiB  | MT7615DN (2T2R, DBDC)  | Yes, b/g/n/ac  | Yes, b/g/n/ac  | 1 x AR8033 Gigabit    | No   | Yes     | 4     | 2        |
  
 The SPI flash is ''Macronix MX25L6406E'' which appears to be a compatible replacement for ''MX25L640**5D**''. The SPI flash is ''Macronix MX25L6406E'' which appears to be a compatible replacement for ''MX25L640**5D**''.
-====== Boot output ====== +==== OEM bootlog ==== 
- +<WRAP bootlog> 
-==== Stock firmware 1.06b04 ==== +<nowiki> 
-<WRAP bootlog><nowiki>U-Boot 1.1.3 (Mar 21 2016 - 16:55:00)+U-Boot 1.1.3 (Mar 21 2016 - 16:55:00)
  
 Board: Ralink APSoC DRAM:  64 MB Board: Ralink APSoC DRAM:  64 MB
Line 22: Line 28:
 enable ephy clock...done. rf reg 29 = 5 enable ephy clock...done. rf reg 29 = 5
 SSC disabled. SSC disabled.
-spi_wait_nsec: 29+****************************** 
 +Software System Reset Occurred 
 +****************************** 
 +spi_wait_nsec: 29 
 spi device id: c2 20 17 c2 20 (2017c220) spi device id: c2 20 17 c2 20 (2017c220)
 find flash: MX25L6405D find flash: MX25L6405D
-raspi_read: from:30000 len:1000+raspi_read: from:30000 len:1000 
 *** Warning - bad CRC, using default environment *** Warning - bad CRC, using default environment
  
-============================================+============================================ 
 Ralink UBoot Version: 4.1.1.0 Ralink UBoot Version: 4.1.1.0
---------------------------------------------+-------------------------------------------- 
 ASIC 7620_MP (Port5<->Phy) ASIC 7620_MP (Port5<->Phy)
 DRAM component: 512 Mbits DDR, width 16 DRAM component: 512 Mbits DDR, width 16
Line 39: Line 48:
 Cameo Version: v1.00 Build:02 Cameo Version: v1.00 Build:02
 Module Name: D-Link DAP-1620A1 Module Name: D-Link DAP-1620A1
-============================================+============================================ 
 icache: sets:512, ways:4, linesz:32 ,total:65536 icache: sets:512, ways:4, linesz:32 ,total:65536
-dcache: sets:256, ways:4, linesz:32 ,total:32768+dcache: sets:256, ways:4, linesz:32 ,total:32768 
  
- ##### The CPU freq = 580 MHZ ####+ ##### The CPU freq = 580 MHZ #### 
  estimate memory size =64 Mbytes  estimate memory size =64 Mbytes
-raspi_read: from:50000 len:40 +raspi_read: from:50000 len:40  
-raspi_read: from:4f0000 len:40+raspi_read: from:4f0000 len:40 
  
 ================================================= =================================================
Line 54: Line 63:
 Image1 Header Checksum --> OK Image1 Header Checksum --> OK
 Image2 Header Checksum --> OK Image2 Header Checksum --> OK
-Image1 Data Checksum --> raspi_read: from:50040 len:dc7e6+Image1 Data Checksum --> raspi_read: from:50040 len:dc7e6 
 OK OK
-Image2 Data Checksum --> raspi_read: from:4f0040 len:c9469+Image2 Data Checksum --> raspi_read: from:4f0040 len:c9469 
 OK OK
  
Line 64: Line 73:
 ================================================= =================================================
  
-Please choose the operation: +Please choose the operation:  
-   1: Load system code to SDRAM via TFTP. +   1: Load system code to SDRAM via TFTP.  
-   2: Load system code then write to Flash via TFTP.+   2: Load system code then write to Flash via TFTP. 
    3: Boot system code via Flash (default).    3: Boot system code via Flash (default).
    4: Entr boot command line interface.    4: Entr boot command line interface.
-   7: Load Boot Loader code then write to Flash via Serial. +   7: Load Boot Loader code then write to Flash via Serial.  
-   9: Load Boot Loader code then write to Flash via TFTP.                                                             +   9: Load Boot Loader code then write to Flash via TFTP.  
 + 1  0  
 +   
 3: System Boot system code via Flash. 3: System Boot system code via Flash.
 ## Booting image at bc050000 ... ## Booting image at bc050000 ...
-raspi_read: from:50000 len:40+raspi_read: from:50000 len:40 
    Image Name:   Linux Kernel Image    Image Name:   Linux Kernel Image
    Image Type:   MIPS Linux Kernel Image (lzma compressed)    Image Type:   MIPS Linux Kernel Image (lzma compressed)
Line 80: Line 90:
    Load Address: 80000000    Load Address: 80000000
    Entry Point:  8000c310    Entry Point:  8000c310
-raspi_read: from:50040 len:dc7e6+raspi_read: from:50040 len:dc7e6 
    Verifying Checksum ... OK    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK    Uncompressing Kernel Image ... OK
Line 91: Line 101:
  
 LINUX started... LINUX started...
- 
  THIS IS ASIC  THIS IS ASIC
 Linux version 2.6.36.x (root@roger-1620a-desktop) (gcc version 3.4.2) #2 Mon Dec 11 10:56:07 CST 2017 Linux version 2.6.36.x (root@roger-1620a-desktop) (gcc version 3.4.2) #2 Mon Dec 11 10:56:07 CST 2017
- 
  The CPU feqenuce set to 580 MHz  The CPU feqenuce set to 580 MHz
  PCIE: bypass PCIe DLL.  PCIE: bypass PCIe DLL.
Line 115: Line 123:
 Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes. Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes.
 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
-Writing ErrCtl register=0003a00b +Writing ErrCtl register=0006f100 
-Readback ErrCtl register=0003a00b+Readback ErrCtl register=0006f100
 Memory: 61980k/65536k available (2209k kernel code, 3556k reserved, 339k data, 168k init, 0k highmem) Memory: 61980k/65536k available (2209k kernel code, 3556k reserved, 339k data, 168k init, 0k highmem)
 NR_IRQS:128 NR_IRQS:128
Line 126: Line 134:
 RALINK_GPIOMODE = 1a301d RALINK_GPIOMODE = 1a301d
 RALINK_GPIOMODE = 18301d RALINK_GPIOMODE = 18301d
-PPLL_CFG1=0xe48000+PPLL_CFG1=0xe58000
 MT7620 PPLL lock MT7620 PPLL lock
 PPLL_DRV =0x80080504 PPLL_DRV =0x80080504
Line 132: Line 140:
 RALINK_RSTCTRL = 2400000 RALINK_RSTCTRL = 2400000
 RALINK_CLKCFG1 = 75afffc0 RALINK_CLKCFG1 = 75afffc0
- 
 *************** MT7620 PCIe RC mode ************* *************** MT7620 PCIe RC mode *************
 PCIE0 enabled PCIE0 enabled
Line 231: Line 238:
 init nvram memory map size: 0x10000 order of pages: 0x4 init nvram memory map size: 0x10000 order of pages: 0x4
 nvram module init: nvram module init:
-        /dev/nvram major number 225 glues to mtd: "nvram" size: 0x00010000 + /dev/nvram major number 225 glues to mtd: "nvram" size: 0x00010000 
-        nvram_space: 0x00010000 mapped via mmap(2)+ nvram_space: 0x00010000 mapped via mmap(2)
 openfile :/etc/sysinfo openfile :/etc/sysinfo
 read_mp_info: read 65536 data from /dev/mtdblock3 successfully read_mp_info: read 65536 data from /dev/mtdblock3 successfully
 openfile :/etc/nvram.default openfile :/etc/nvram.default
- 
- 
 BusyBox v1.01 (2017.12.11-02:52+0000) Built-in shell (ash) BusyBox v1.01 (2017.12.11-02:52+0000) Built-in shell (ash)
 Enter 'help' for a list of built-in commands. Enter 'help' for a list of built-in commands.
- 
 / # rm: cannot remove `/var/wizard_lang.js': No such file or directory / # rm: cannot remove `/var/wizard_lang.js': No such file or directory
 eth2: Cannot assign requested address eth2: Cannot assign requested address
-umount: cannot umount /tmp/lang_pack: No such file or Raeth v3.1 (directory +umount: cannot umount Raeth v3.1 (/tmp/lang_pack: TaskletNo such file or ,SkbRecycledirectory 
-Tasklet,SkbRecycle) +
- +phy_tx_ring = 0x03fd2000, tx_ring = 0xa3fd2000 
-phy_tx_ring = 0x03fd6000, tx_ring = 0xa3fd6000 +phy_rx_ring0 = 0x03fd4000, rx_ring0 = 0xa3fd4000 
- +SMACCR1 -- : 0x0000a0ab 
-phy_rx_ring0 = 0x03fd8000, rx_ring0 = 0xa3fd8000 +SMACCR0 -- : 0x1bee6522
-SMACCR1 -- : 0x0000409b +
-SMACCR0 -- : 0xcd7c27ce+
 CDMA_CSG_CFG = 81000000 CDMA_CSG_CFG = 81000000
 GDMA1_FWD_CFG = 20710000 GDMA1_FWD_CFG = 20710000
 umount: cannot umount /tmp/lang_pack: No such file or directory umount: cannot umount /tmp/lang_pack: No such file or directory
 +mount: mounting /dev/mtdblock6 on /tmp/lang_pack failed
 eth2: Cannot assign requested address eth2: Cannot assign requested address
-mount: mounting /dev/mtdblock6 on /tmp/lang_pack failed 
 device eth2 entered promiscuous mode device eth2 entered promiscuous mode
 killall: syslogd: no process killed killall: syslogd: no process killed
Line 261: Line 263:
 Thu Jan  1 00:00:00 UTC 2015 Thu Jan  1 00:00:00 UTC 2015
 /tmp/password has been created /tmp/password has been created
-2015-01-01 00:00:00: (network.c.247) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes+2015-01-01 00:00:00: (network.c.247) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes 
 checksum=0x849E141B checksum=0x849E141B
 openfile :/etc/nvram.default openfile :/etc/nvram.default
-nvram: ap_wlan0_5g_auto_channel_enable="0", but default is "br0: port 1(eth2) entering forwarding state +default_val=1 
-1" +===============DUTinfo_file detail===========br0: port 1(eth2) entering forwarding state 
-nvram: ap_wlbr0: port 1(eth2) entering forwarding state +== 
-an0_11n_protection="20", but default is "auto" +[Type]0x0001br0: port 1(eth2) entering forwarding state 
-nvram: ap_wlan0_auto_channel_enable="0", but default is "1" +[Length]8[Value]DAP-1620
-nvram: ap_wlan0_channel="4", but default is "11" +
-nvram: ap_wlan0_disablecoext="0", but default is "1" +
-nvram: cookie="1144823555", but default is "X" +
-nvram: wlan0_5g_enable="0", but default is "1" +
-nvram: ap_ipv6_wan_proto="link_local", but default is "ipv6_autoconfig" +
-nvram: default_downlink_ssid="0", but default is "1" +
-nvram: setup_wizard_ap="0", but default is "1" +
-nvram: wlan1_psk_pass_phrase="", but default is "1234567890" +
-nvram: wlan0_disable_wps_pbc="1", but default is "0" +
-nvram: wlan0_wps_configured_mode="1", but default is "5" +
-nvram: wlan0_wps_enable="0", but default is "1" +
-nvram: wlan0_disablecoext="0", but default is "1" +
-nvram: wlan0_11n_protection="20", but default is "auto" +
-nvram: wlan0_auto_channel_enable="0", but default is "1" +
-nvram: wlan0_channel="4", but default is "11" +
-nvram: wlan0_5g_auto_channel_enable="0", but default is "1" +
-nvram: dhcpc_enable="0", but default is "1" +
-nvram: ap_primary_dns="192.168.2.1", but default is "0.0.0.0" +
-nvram: ap_gateway="192.168.2.50", but default is "0.0.0.0" +
-nvram: ap_ipaddr="192.168.2.50", but default is "192.168.0.50" +
-nvram: admin_password="abc123test", but default is "" +
-nvram: wlan1_enable="0", but default is "1" +
-nvram: rp_mode="0", but default is "1" +
-default_val=0 +
-===============DUTinfo_file detail============= +
-[Type]0x0001[Length]8[Value]DAP-1620+
 [Type]0x0002[Length]2[Value]A2 [Type]0x0002[Length]2[Value]A2
-[Type]0x0004[Length]1[Value]0+[Type]0x0004[Length]1[Value]1
 [Type]0x0005[Length]7[Value]1.06b04 [Type]0x0005[Length]7[Value]1.06b04
-[Type]0x0009[Length]17[Value]40:9b:cd:7c:27:ce +[Type]0x0009[Length]17[Value]a0:ab:1b:ee:65:aa 
-[Type]0x000A[Length]17[Value]40:9b:cd:7c:27:ce +[Type]0x000A[Length]17[Value]a0:ab:1b:ee:65:aa 
-[Type]0x000B[Length]17[Value]40:9b:cd:7c:27:d0 +[Type]0x000B[Length]17[Value]a0:ab:1b:ee:65:bb 
-[Type]0x000C[Length]4[Value]0x37 +[Type]0x000C[Length]4[Value]0x14 
-[Type]0x0010[Length]10[Value]dlink-27CE +[Type]0x0010[Length]10[Value]dlink-6522 
-[Type]0x0011[Length]15[Value]dlink-27CE-5GHz +[Type]0x0011[Length]15[Value]dlink-6522-5GHz 
-[Type]0x0012[Length]10[Value]ayyce34805 +[Type]0x0012[Length]10[Value]hrcgy84879 
-[Type]0x0013[Length]12[Value]abc123test+[Type]0x0013[Length]0[Value]
 [Type]0x0014[Length]10[Value]0x849E141B [Type]0x0014[Length]10[Value]0x849E141B
-[Type]0x001A[Length]12[Value]201760101662+[Type]0x001A[Length]12[Value]201691402454
 [Type]0x000D[Length]9[Value]/var/tmp/ [Type]0x000D[Length]9[Value]/var/tmp/
 [Type]0x000E[Length][Value] [Type]0x000E[Length][Value]
-set_5G_wlan_basic: >>>> wlan0_5g_dfs_enable[0] +set_5G_wlan_basic: A11>>>> forced_enable[0] wlan1_enable[1] current_system_mode[1] wlan0_5g_dfs_enable[0]
-set_5G_wlan_basic: A11>>>> forced_enable[0] wlan1_enable[0] current_system_mode[0] wlan0_5g_dfs_enable[0] +
-set_5G_wlan_basic: A22>>>> wlan1_enable[0] current_system_mode[0]+
 register rt2860 register rt2860
- 
- 
 === pAd = c0582000, size = 2286352 === === pAd = c0582000, size = 2286352 ===
- 
 <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocTxRxRingMemory, Status=0
 <-- RTMPAllocAdapterBlock, Status=0 <-- RTMPAllocAdapterBlock, Status=0
Line 330: Line 301:
 get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
 ===> rt2880_probe ===> rt2880_probe
- 
- 
 === pAd = c07b3000, size = 2286352 === === pAd = c07b3000, size = 2286352 ===
- 
 <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocTxRxRingMemory, Status=0
 <-- RTMPAllocAdapterBlock, Status=0 <-- RTMPAllocAdapterBlock, Status=0
Line 340: Line 308:
 NVM is FLASH mode (pAd->flash_offset = 0x40000) NVM is FLASH mode (pAd->flash_offset = 0x40000)
 get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=ra get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=ra
-ra0: at CSR addr 0xb0180000, IRQ 4.+ra0: at CSR addr 0xb0180000, IRQ 4. 
 <=== rt2880_probe <=== rt2880_probe
-RX[0] DESC a2f35000 size = 4096 +RX[0] DESC a2f2e000 size = 4096 
-RX[1] DESC a2f36000 size = 4096+RX[1] DESC a2f2f000 size = 4096
 cfg_mode=9 cfg_mode=9
 cfg_mode=9 cfg_mode=9
Line 367: Line 335:
 pAd->ed_chk = 2 pAd->ed_chk = 2
 pAd->ed_false_cca_threshold = 3000 pAd->ed_false_cca_threshold = 3000
-IF(ra0) The length of WAPI PSKPassPhrase is invalid(len=0).+IF(ra0) The length of WAPI PSKPassPhrase is invalid(len=0). 
 1. Phy Mode = 14 1. Phy Mode = 14
 Country Region from e2p = ffff Country Region from e2p = ffff
-E2PROM: D0 target power=0xff1e +E2PROM: D0 target power=0xff1e  
-E2PROM: 40 MW Power Delta= 0+E2PROM: 40 MW Power Delta= 0 
 2. Phy Mode = 14 2. Phy Mode = 14
 3. Phy Mode = 14 3. Phy Mode = 14
 AntCfgInit: primary/secondary ant 0/1 AntCfgInit: primary/secondary ant 0/1
-D1 = 1, D2 = 3, CalCode = !!! +D1 = -2, D2 = -4, CalCode = -4 !!! 
-RT6352_Temperature_Init : BBPR49 = 0x1 +RT6352_Temperature_Init : BBPR49 = 0xfffffffe 
-RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff7 +RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff4 
-Current Temperature from BBP_R49=0xfffffff1+Current Temperature from BBP_R49=0xfffffff6
  TX BW Filter Calibration !!!  TX BW Filter Calibration !!!
  RX BW Filter Calibration !!!  RX BW Filter Calibration !!!
 LOFT Calibration Done! LOFT Calibration Done!
 IQCalibration Start! IQCalibration Start!
-IQCalibration Done! CH = 0, (gain= 1, phase=3d)+IQCalibration Done! CH = 0, (gain= f, phase= 1)
 IQCalibration Start! IQCalibration Start!
-IQCalibration Done! CH = 1, (gain= f, phase= 2)+IQCalibration Done! CH = 1, (gain= 0, phase=3e)
 TX IQ Calibration Done! TX IQ Calibration Done!
 ChipStructAssign(): RALINK6352 hook ! ChipStructAssign(): RALINK6352 hook !
-MCS Set = ff ff 00 00 00 +MCS Set = ff ff 00 00 01 
-APStartUp(): AP Set CentralFreq at 4(Prim=4, HT-CentCh=4, VHT-CentCh=0, BBP_BW=0+SYNC - BBP R4 to 20MHz.l 
-@@@ ed_monitor_init : ===> +SYNC - BBP R4 to 20MHz.l 
-@@@ ed_monitor_init : <=== +SYNC - BBP R4 to 20MHz.l 
-Main bssid = 40:9b:cd:7c:27:ce+SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +APStartUp(): AP Set CentralFreq at 3(Prim=1, HT-CentCh=3, VHT-CentCh=0, BBP_BW=1
 +@@@ ed_monitor_exit : ===> 
 +@@@ ed_monitor_exit : <=== 
 +Main bssid = a0:ab:1b:ee:65:aa
 <==== rt28xx_init, Status=0 <==== rt28xx_init, Status=0
 get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apcli get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apcli
 RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(1):Check if PDMA is idle!
 RTMPDrvOpen(2):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle!
-@@@ ed_monitor_init : ===> 
-@@@ ed_monitor_init : <=== 
 device ra0 entered promiscuous mode device ra0 entered promiscuous mode
 br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state
 br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state
-build time =+device apcli0 entered promiscuous mode 
 +br0: port 3(apcli0) entering forwarding state 
 +br0: port 3(apcli0) entering forwarding state 
 +Interface doesn't accept private ioctl... 
 +set (8BE2): Invalid argument 
 +build time = 
 20141115060606a 20141115060606a
 rom patch for E3 IC rom patch for E3 IC
- +platform = 
-platform =+
 ALPS ALPS
-hw/sw version = +hw/sw version =  
-▒▒ +ŠŠ 
-patch version = +patch version =  
 +
 FW Version:0.0.00 Build:1 FW Version:0.0.00 Build:1
 Build Time:201507311614____ Build Time:201507311614____
 fw for E3 IC fw for E3 IC
-RX[0] DESC a36a6000 size = 4096 +RX[0] DESC a36a7000 size = 4096 
-RX[1] DESC a36a7000 size = 4096+RX[1] DESC a36d0000 size = 4096
 cfg_mode=14 cfg_mode=14
 cfg_mode=14 cfg_mode=14
Line 437: Line 415:
 APSDCapable[15]=0 APSDCapable[15]=0
 default ApCliAPSDCapable[0]=0 default ApCliAPSDCapable[0]=0
-IF(ra0) The length of WAPI PSKPassPhrase is invalid(len=0).+IF(ra0) The length of WAPI PSKPassPhrase is invalid(len=0). 
 1. Phy Mode = 49 1. Phy Mode = 49
 get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (167)
Line 462: Line 440:
 ChipStructAssign(): MT76x2 hook ! ChipStructAssign(): MT76x2 hook !
 MCS Set = ff ff 00 00 01 MCS Set = ff ff 00 00 01
-mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 
 TX0 power compensation = 0x38 TX0 power compensation = 0x38
 TX1 power compensation = 0x38 TX1 power compensation = 0x38
 +mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
 APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
 mt76x2_calibration(channel = 42) mt76x2_calibration(channel = 42)
-@@@ ed_monitor_init : ===> +@@@ ed_monitor_exit : ===> 
-@@@ ed_monitor_init : <=== +@@@ ed_monitor_exit : <=== 
-Main bssid = 40:9b:cd:7c:27:d0+Main bssid = a0:ab:1b:ee:65:bb
 mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c
 mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c
Line 480: Line 458:
 RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(1):Check if PDMA is idle!
 RTMPDrvOpen(2):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle!
-@@@ ed_monitor_init ===> +bulklisten(create_socket@151)Local IP192.168.0.50
-@@@ ed_monitor_init <===+
 device rai0 entered promiscuous mode device rai0 entered promiscuous mode
-br0: port 3(rai0) entering forwarding state +br0: port 4(rai0) entering forwarding state 
-br0: port 3(rai0) entering forwarding state +br0: port 4(rai0) entering forwarding state 
-device rai0 left promiscuous mode +device apclii0 entered promiscuous mode 
-br0: port 3(rai0) entering forwarding state +br0: port 5(apclii0) entering forwarding state 
-@@@ APStopgo to ed_monitor_exit()!! +br0port 5(apclii0entering forwarding state 
-@@@ ed_monitor_exit : ===> +Interface doesn't accept private ioctl... 
-@@@ ed_monitor_exit <=== +set (8BE2)Invalid argument 
-andes_pci_erasefw +start_wlan: Repeater mode  
-==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b</nowiki></WRAP>+killall: repeater_monitor: no process killed 
 +[[[[=== repeater_monitor_main Start...===]]]] 
 +killallapmode_monitor: no process killed 
 +[[[[=== apmode_monitor_main Start...===]]]] 
 +Start IPv6 dhclient 
 +Start APP 
 +Thu Jan  1 00:00:00 UTC 2015 
 +llmnr: have no available linklocal address. wait count=
 +/tmp/password has been created 
 +2015-01-01 00:00:00: (network.c.247warningplease use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes  
 +repeater_monitor.c check bulklisten break.....  
 +br0port 5(apclii0) entering forwarding state 
 +br0: port 4(rai0) entering forwarding state 
 +br0: port 3(apcli0) entering forwarding state 
 +br0: port 2(ra0) entering forwarding state 
 +br0: port 1(eth2) entering forwarding state 
 +br0: port 5(apclii0) entering forwarding state 
 +br0: port 5(apclii0) entering forwarding state 
 +br0: port 4(rai0) entering forwarding state 
 +br0: port 4(rai0) entering forwarding state 
 +br0: port 3(apcli0) entering forwarding state 
 +br0: port 3(apcli0) entering forwarding state 
 +br0: port 2(ra0) entering forwarding state 
 +br0: port 2(ra0) entering forwarding state 
 +br0: port 1(eth2) entering forwarding state 
 +br0: port 1(eth2) entering forwarding state 
 +killall: udhcpc: no process killed 
 + -------------- stop_dhcpc UP --------   
 +SIOCSIFFLAGS: Cannot assign requested address 
 +rm: cannot remove `/var/tmp/previous_dn': No such file or directory 
 +rm: cannot remove `/var/tmp/previous_dns': No such file or directory 
 +rm: cannot remove `/var/tmp/m_flag': No such file or directory 
 +rm: cannot remove `/var/tmp/o_flag': No such file or directory 
 +RTNETLINK answers: No such file or directory 
 +cat: /var/etc/resolv.conf: No such file or directory 
 +Stop IPv6 rdnssd 
 +Stop IPv6 dhclient 
 +sh: cannot create /proc/sys/net/ipv6/conf/br0/disable_ipv6: Directory nonexistent 
 +link_down()... 
 +killall: udhcpc: no process killed 
 +killall: udhcpd: no process killed 
 +DHCP server start. 
 +device_lan_ip=192.168.0.50 device_lan_subnet_mask=255.255.255.0 
 +max_leases value (254) not sanesetting to 20 instead 
 +Unable to open /var/misc/udhcpd.leases for reading 
 +Start IPv6 dhclient 
 + 
 +</nowiki> 
 +</WRAP>\\ 
  
 +==== OpenWrt bootlog ====
 +<WRAP bootlog>
 +<nowiki>
 U-Boot 1.1.3 (Mar 21 2016 - 16:55:00) U-Boot 1.1.3 (Mar 21 2016 - 16:55:00)
  
Line 762: Line 791:
 -------------------------------------------------- --------------------------------------------------
 root@OpenWrt:~#  root@OpenWrt:~# 
 +</nowiki>
 +</WRAP>\\
 ====== Photos ====== ====== Photos ======
  
Line 770: Line 801:
 {{:media:dlink:dap-1620:dap-1620_rev_a1a2_back.jpeg?direct&600|DAP-1620 PCB back}} {{:media:dlink:dap-1620:dap-1620_rev_a1a2_back.jpeg?direct&600|DAP-1620 PCB back}}
  
 +
 +Serial Port connection. (Leave the red disconnected). 
 +Baud:57600, DataBits:8, StopBits:1, Parity/FlowControl:None
 +
 +{{:media:d-link:d-link-dap-1620-a2-serialport.jpg?400|}}
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
  
 {{tag>ramips mt7620a 8flash 64ram 1nic gigabitethernet 802.11bgn 802.11ac WIP unsupported wall_plug}} {{tag>ramips mt7620a 8flash 64ram 1nic gigabitethernet 802.11bgn 802.11ac WIP unsupported wall_plug}}
  • Last modified: 2024/12/12 19:16
  • by raenye