Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:asus:pl-ac56_a1 [2022/04/16 19:28] – [Notes] therealsummonerinbox:toh:asus:pl-ac56_a1 [2022/05/01 13:34] – [Notes] therealsummoner
Line 178: Line 178:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +Aug  1 00:00:17 syslogd started: BusyBox v1.17.4 
 +Aug  1 00:00:17 kernel: Zone PFN ranges: 
 +Aug  1 00:00:17 kernel:   Normal   0x00000000 -> 0x00004000 
 +Aug  1 00:00:17 kernel: Movable zone start PFN for each node 
 +Aug  1 00:00:17 kernel: Early memory PFN ranges 
 +Aug  1 00:00:17 kernel:     0: 0x00000000 -> 0x00004000 
 +Aug  1 00:00:17 kernel: Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16256 
 +Aug  1 00:00:17 kernel: Kernel command line:  board=AP152 console=ttyS0,115200 root=/dev/mtdblock4 rootfstype=squashfs mem=64M 
 +Aug  1 00:00:17 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +Aug  1 00:00:17 kernel: Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +Aug  1 00:00:17 kernel: registering PCI controller with io_map_base unset 
 +Aug  1 00:00:17 kernel: m25p80 spi0.0: found mx25l12805d, expected m25p80 
 +Aug  1 00:00:17 kernel: Creating 7 MTD partitions on "ath79-nor0": 
 +Aug  1 00:00:17 kernel: 0x000000000000-0x000000040000 : "Bootloader" 
 +Aug  1 00:00:17 kernel: 0x000000040000-0x000000050000 : "nvram" 
 +Aug  1 00:00:17 kernel: 0x000000050000-0x000000060000 : "Factory" 
 +Aug  1 00:00:17 kernel: 0x000000060000-0x000000f80000 : "linux" 
 +Aug  1 00:00:17 kernel: 0x000000171440-0x000000f80000 : "rootfs" 
 +Aug  1 00:00:17 kernel: 0x000000f80000-0x000001000000 : "plc" 
 +Aug  1 00:00:17 kernel: 0x000000000000-0x000001000000 : "ALL" 
 +Aug  1 00:00:17 kernel: offset 0x9000 elapse 0ms 
 +Aug  1 00:00:17 kernel: bled: GPIO#6: switch ports mask        0. 
 +Aug  1 00:00:17 kernel: bled: GPIO#19: netdev ath0. 
 +Aug  1 00:00:17 kernel: bled: GPIO#8: netdev ath1. 
 +Aug  1 00:00:17 kernel: asf: module license 'Proprietary' taints kernel. 
 +Aug  1 00:00:17 kernel: Disabling lock debugging due to kernel taint 
 +Aug  1 00:00:17 kernel: ****Address of trace_timer :834226a0  
 +Aug  1 00:00:17 kernel: ath_hal: Unknown parameter `ce_level' 
 +Aug  1 00:00:17 kernel: ath_tx99: Version 2.0 
 +Aug  1 00:00:17 kernel: Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved 
 +Aug  1 00:00:17 kernel: __ath_attach: Set global_scn[0] 
 +Aug  1 00:00:17 kernel: *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** 
 +Aug  1 00:00:17 kernel: ACBKMinfree = 48 
 +Aug  1 00:00:17 kernel: ACBEMinfree = 32 
 +Aug  1 00:00:17 kernel: ACVIMinfree = 16 
 +Aug  1 00:00:17 kernel: ACVOMinfree = 0 
 +Aug  1 00:00:17 kernel: CABMinfree = 48 
 +Aug  1 00:00:17 kernel: UAPSDMinfree = 0 
 +Aug  1 00:00:17 kernel: ATH_TXBUF=540 
 +Aug  1 00:00:17 kernel: ART Version : 10.517 
 +Aug  1 00:00:17 kernel: SW Image Version : 0.20.-12.0.2 
 +Aug  1 00:00:17 kernel: Board Revision :   
 +Aug  1 00:00:17 kernel: ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125  
 +Aug  1 00:00:17 kernel: SPECTRAL : get_capability not registered 
 +Aug  1 00:00:17 kernel: HAL_CAP_PHYDIAG : Capable 
 +Aug  1 00:00:17 kernel: SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231) 
 +Aug  1 00:00:17 kernel: SPECTRAL : get_capability not registered 
 +Aug  1 00:00:17 kernel: HAL_CAP_RADAR   : Capable 
 +Aug  1 00:00:17 kernel: SPECTRAL : Need to fix the capablity check for SPECTRAL 
 +Aug  1 00:00:17 kernel:  (spectral_attach : 236) 
 +Aug  1 00:00:17 dnsmasq[251]: no servers found in /etc/resolv.conf, will retry 
 +Aug  1 00:00:18 kernel: SPECTRAL : get_capability not registered 
 +Aug  1 00:00:18 kernel: HAL_CAP_SPECTRAL_SCAN : Capable 
 +Aug  1 00:00:18 kernel: SPECTRAL : get_tsf64 not registered 
 +Aug  1 00:00:18 kernel: spectral_init_netlink 65 NULL SKB 
 +Aug  1 00:00:18 kernel: SPECTRAL : No ADVANCED SPECTRAL SUPPORT 
 +Aug  1 00:00:18 kernel: SPECTRAL :----- module attached 
 +Aug  1 00:00:18 kernel: Green-AP : Green-AP : Attached 
 +Aug  1 00:00:18 kernel: ath_get_caps[6267] rx chainmask mismatch actual 3 sc_chainmak 0 
 +Aug  1 00:00:18 kernel: ath_get_caps[6242] tx chainmask mismatch actual 3 sc_chainmak 0 
 +Aug  1 00:00:18 kernel: band steering initialized for direct attach hardware  
 +Aug  1 00:00:18 kernel: ieee80211_bsteering_attach: Band steering initialized 
 +Aug  1 00:00:18 kernel: ath_attach_dfs[12799] dfsdomain 1 
 +Aug  1 00:00:18 kernel: SPECTRAL : module already attached 
 +Aug  1 00:00:18 kernel: ath_tx_paprd_init sc 82f48000 PAPRD disabled in HAL 
 +Aug  1 00:00:18 kernel: PCI device id is 003c :003c 
 +Aug  1 00:00:18 kernel: PCI: Enabling device 0000:00:00.0 (0000 -> 0002) 
 +Aug  1 00:00:18 kernel:  ol_ath_pci_configure : num_desired MSI set to 0 
 +Aug  1 00:00:18 kernel:  Using PCI Legacy Interrupt 
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00057400  
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00057800  
 +Aug  1 00:00:18 kernel: __ol_ath_attach: ath_attach TODO 
 +Aug  1 00:00:18 kernel: __ol_ath_attach: dev name wifi1 
 +Aug  1 00:00:18 kernel: ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) 
 +Aug  1 00:00:18 kernel:  OL_ACBKMinfree : 0 
 +Aug  1 00:00:18 kernel:  OL_ACBEMinfree : 0 
 +Aug  1 00:00:18 kernel:  OL_ACVIMinfree : 0 
 +Aug  1 00:00:18 kernel:  OL_ACVOMinfree : 0 
 +Aug  1 00:00:18 kernel: ol_ath_attach() BMI inited. 
 +Aug  1 00:00:18 kernel: ol_ath_attach() BMI Get Target Info. 
 +Aug  1 00:00:18 kernel: ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c 
 +Aug  1 00:00:18 kernel: NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 
 +Aug  1 00:00:18 kernel: ol_ath_attach() configure Target . 
 +Aug  1 00:00:18 kernel: ath_nand_local_read: cal_part [Factory] from 5000 len 844 
 +Aug  1 00:00:18 PL-AC56: start httpd 
 +Aug  1 00:00:18 kernel: qc98xx_verify_checksum: flash checksum passed: 0x911f 
 +Aug  1 00:00:18 kernel: ol_transfer_bin_file 2238: Download Flash data len 2116 
 +Aug  1 00:00:18 kernel:  Download AR9888v2_bin 
 +Aug  1 00:00:18 kernel: ol_transfer_bin_file 2159: Download Firmware data len 235636 
 +Aug  1 00:00:18 kernel: ol_ath_attach() Download FW.  
 +Aug  1 00:00:18 kernel: ol_ath_attach() HT Create . 
 +Aug  1 00:00:18 kernel: ol_ath_attach() HIF Claim. 
 +Aug  1 00:00:18 kernel: ol_ath_attach() BMI Done.  
 +Aug  1 00:00:18 kernel: ol_ath_attach() WMI attached. wmi_handle 82820000  
 +Aug  1 00:00:18 kernel: +HWT 
 +Aug  1 00:00:18 kernel: SOC_RESET_CONTROL_ADDRESS : 800 
 +Aug  1 00:00:18 kernel: CPU_INTR_ADDRESS = [0] 
 +Aug  1 00:00:18 kernel: SOC_GLOBAL_RESET_ADDRESS = [0] 
 +Aug  1 00:00:18 kernel: Rx_Filter : [0] 
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00057400  
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00057800  
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00057c00  
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00058000  
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00058400  
 +Aug  1 00:00:18 kernel: CE_per_engine_handler_adjust, base=82a77200 offset=00058800  
 +Aug  1 00:00:18 kernel: CE_recv_buf_enqueue 653 Populate last entry 512 for CE 5 
 +Aug  1 00:00:18 kernel: CE_recv_buf_enqueue 662 CE 5 wi 511 dest_ptr 0x29fd840 nbytes 0 recv_ctxt 0x829e9540 
 +Aug  1 00:00:18 kernel: Target:83d97000 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready 
 +Aug  1 00:00:18 kernel: -HWT 
 +Aug  1 00:00:18 kernel: Target:83d97000 HTC Service:0x0300, ULpipe:4 DLpipe:5 id:1 Ready 
 +Aug  1 00:00:18 kernel: HTC Service:0x0300 ep:1 TX flow control disabled 
 +Aug  1 00:00:18 kernel: CE_pkt_dl_len_set CE 4 Pkt download length 64 
 +Aug  1 00:00:18 kernel: ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from 81c40000 
 +Aug  1 00:00:18 kernel: Target:83d97000 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready 
 +Aug  1 00:00:18 kernel: HTC Service:0x0100 ep:2 TX flow control disabled 
 +Aug  1 00:00:18 kernel: wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event  
 +Aug  1 00:00:18 kernel: num_rf_chain : 00000002 
 +Aug  1 00:00:18 kernel: ht_cap_info: : 0000085b 
 +Aug  1 00:00:18 kernel: vht_cap_info : 338001b2 
 +Aug  1 00:00:18 kernel: vht_supp_mcs : 0000fffa 
 +Aug  1 00:00:18 kernel: LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256, lteu_support 0 
 +Aug  1 00:00:18 kernel: idx 0 req 1  num_units 0 num_unit_info 2 unit size 440 actual units 145  
 +Aug  1 00:00:18 kernel: chunk 0 len 63800 requested ,ptr  0x1c60000  
 +Aug  1 00:00:18 kernel: FIRMWARE:P 145 V 16 T 443 
 +Aug  1 00:00:18 kernel:   
 +Aug  1 00:00:18 kernel: FIRMWARE:_wlan_rtt_enable  
 +Aug  1 00:00:18 kernel: wmi_ready_event_rx:  WMI UNIFIED READY event  
 +Aug  1 00:00:18 kernel: ol_ath_connect_htc() WMI is ready 
 +Aug  1 00:00:18 kernel: ol_ath_set_host_app_area TODO 
 +Aug  1 00:00:18 kernel: target uses HTT version 2.1; host uses 2.1 
 +Aug  1 00:00:18 kernel: ol_ath_attach() connect HTC.  
 +Aug  1 00:00:18 kernel: bypasswmi : 0 
 +Aug  1 00:00:18 kernel: ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. 
 +Aug  1 00:00:18 syslog: Generating SSL certificate... 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +Aug  1 00:00:18 kernel: Add VHT80 channel: 5210 
 +Aug  1 00:00:18 kernel: Add VHT80 channel: 5775 
 +Aug  1 00:00:18 kernel: Skipping VHT80 channel 5825 
 +Aug  1 00:00:18 kernel: ol_ath_phyerr_attach: called 
 +Aug  1 00:00:18 kernel: OL Resmgr Init-ed 
 +Aug  1 00:00:18 kernel: ieee80211_bsteering_attach: Band steering initialized 
 +Aug  1 00:00:18 kernel: ol_if_spectral_setup 
 +Aug  1 00:00:18 kernel: SPECTRAL : get_capability not registered 
 +Aug  1 00:00:18 kernel: HAL_CAP_PHYDIAG : Capable 
 +Aug  1 00:00:18 kernel: SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231) 
 +Aug  1 00:00:18 kernel: SPECTRAL : get_capability not registered 
 +Aug  1 00:00:18 kernel: HAL_CAP_RADAR   : Capable 
 +Aug  1 00:00:18 kernel: SPECTRAL : Need to fix the capablity check for SPECTRAL 
 +Aug  1 00:00:18 kernel:  (spectral_attach : 236) 
 +Aug  1 00:00:18 kernel: SPECTRAL : get_capability not registered 
 +Aug  1 00:00:18 kernel: HAL_CAP_SPECTRAL_SCAN : Capable 
 +Aug  1 00:00:18 kernel: SPECTRAL : get_tsf64 not registered 
 +Aug  1 00:00:18 kernel: spectral_init_netlink 65 NULL SKB 
 +Aug  1 00:00:18 kernel: Green-AP : Green-AP : Attached 
 +Aug  1 00:00:18 kernel: Green-AP : Attached 
 +Aug  1 00:00:18 kernel: ol_if_dfs_setup: called  
 +Aug  1 00:00:18 kernel: ol_if_dfs_attach: called; ptr=81c3d974, radar_info=837b7b78 
 +Aug  1 00:00:18 kernel: ol_ath_rtt_meas_report_attach: called 
 +Aug  1 00:00:18 kernel: ol_ath_attach() UMAC attach .  
 +Aug  1 00:00:18 kernel: ol_if_dfs_configure: called 
 +Aug  1 00:00:18 kernel: ol_if_dfs_configure: UNINIT domain 
 +Aug  1 00:00:18 kernel: ol_if_dfs_disable: called 
 +Aug  1 00:00:18 kernel: ol_ath_attach: Calling ol_if_dfs_configure 
 +Aug  1 00:00:18 kernel: __ol_ath_attach: init tx/rx TODO 
 +Aug  1 00:00:18 kernel: __ol_ath_attach: hard_header_len reservation 58 
 +Aug  1 00:00:18 kernel: sc nodebug 0  
 +Aug  1 00:00:18 kernel: ath_attach_dfs[12799] dfsdomain 1 
 +Aug  1 00:00:18 kernel: isCountryCodeValid: EEPROM regdomain 0x0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +Aug  1 00:00:18 kernel: ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +Aug  1 00:00:18 kernel: Add VHT80 channel: 5210 
 +Aug  1 00:00:18 kernel: Add VHT80 channel: 5290 
 +Aug  1 00:00:18 kernel: Add VHT80 channel: 5530 
 +Aug  1 00:00:18 kernel: Skipping VHT80 channel 5580 
 +Aug  1 00:00:18 kernel: Skipping VHT80 channel 5660 
 +Aug  1 00:00:18 kernel: Skipping VHT80 channel 5680 
 +Aug  1 00:00:18 kernel: Skipping VHT80 channel 5700 
 +Aug  1 00:00:18 kernel: [wifi1] FWLOG: [22831] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 ) 
 +Aug  1 00:00:18 kernel: [wifi1] FWLOG: [22831] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 ) 
 +Aug  1 00:00:18 kernel: [wifi1] FWLOG: [22831] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 ) 
 +Aug  1 00:00:18 kernel: [wifi1] FWLOG: [22831] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 ) 
 +Aug  1 00:00:18 kernel: [wifi1] FWLOG: [22836] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 ) 
 +Aug  1 00:00:18 kernel: [wifi1] FWLOG: [22836] WHAL_ERROR_RESET_PM (  ) 
 +Aug  1 00:00:19 kernel: [wifi1] FWLOG: [22844] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 ) 
 +Aug  1 00:00:19 kernel: [wifi1] FWLOG: [23023] ANI Enable: 
 +Aug  1 00:00:19 kernel: [wifi1] FWLOG: [23030] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 ) 
 +Aug  1 00:00:19 kernel: wlan_vap_create : enter. devhandle=0x82f50380, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +Aug  1 00:00:19 kernel: wlan_vap_create : exit. devhandle=0x82f50380, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +Aug  1 00:00:19 kernel: VAP device ath0 created osifp: (81c3ab80) os_if: (83138000) 
 +Aug  1 00:00:19 kernel: ath_ioctl: SIOC80211IFCREATE CALLED 
 +Aug  1 00:00:19 kernel: wmi_unified_vdev_create_send: ID = 0 VAP Addr = 18:31:bf:68:0e:14: 
 +Aug  1 00:00:19 kernel: Setting dscp for vap id: 0 
 +Aug  1 00:00:19 kernel: VAP device ath1 created osifp: (83135380) os_if: (83100000) 
 +Aug  1 00:00:19 kernel: DCS for CW interference mitigation:   0 
 +Aug  1 00:00:19 kernel: DCS for WLAN interference mitigation: 0 
 +Aug  1 00:00:19 kernel: Set freq vap 0 stop send + 83138000 
 +Aug  1 00:00:19 kernel: Set freq vap 0 stop send -83138000 
 +Aug  1 00:00:19 kernel: Set wait done --83138000 
 +Aug  1 00:00:19 kernel: Set freq vap 0 stop send + 83100000 
 +Aug  1 00:00:19 kernel: OL vap_stop + 
 +Aug  1 00:00:19 kernel: wmi_unified_vdev_stop_send for vap 0 (82820000) 
 +Aug  1 00:00:19 kernel: OL vap_stop - 
 +Aug  1 00:00:19 kernel: STOPPED EVENT for vap 0 (82820000) 
 +Aug  1 00:00:19 kernel: Set freq vap 0 stop send -83100000 
 +Aug  1 00:00:19 kernel: Set wait done --83100000 
 +Aug  1 00:00:21 kernel:   
 +Aug  1 00:00:21 kernel:  DES SSID SET=PL-AC56_10_2G  
 +Aug  1 00:00:22 kernel:  ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1  
 +Aug  1 00:00:22 kernel: _ieee80211_scan_unregister_event_handler: Failed to unregister evhandler=824636ec arg=82aa0000 
 +Aug  1 00:00:22 kernel:  Scan in progress.. Cancelling it  
 +Aug  1 00:00:22 kernel:  DEVICE IS DOWN ifname=ath0 
 +Aug  1 00:00:22 kernel:  DEVICE IS DOWN ifname=ath0 
 +Aug  1 00:00:23 kernel:   
 +Aug  1 00:00:23 kernel:  DES SSID SET=PL-AC56_10_5G  
 +Aug  1 00:00:23 kernel: OL vap_stop + 
 +Aug  1 00:00:23 kernel: wmi_unified_vdev_stop_send for vap 0 (82820000) 
 +Aug  1 00:00:23 kernel: OL vap_stop - 
 +Aug  1 00:00:23 kernel: STOPPED EVENT for vap 0 (82820000) 
 +Aug  1 00:00:23 kernel: ol_ath_vap_set_param: VAP Mcast to Unicast buffer release (cmd): 0 
 +Aug  1 00:00:23 kernel: wmi_mcast_buf_release_handler: VAP Mcast to Unicast buffer released:
 +Aug  1 00:00:23 kernel: ol_ath_vap_set_param: VAP param is now supported param:67 value:0 
 +Aug  1 00:00:23 kernel: wmi_mcast_buf_release_handler: VAP Mcast to Unicast buffer released:
 +Aug  1 00:00:23 kernel:  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1  
 +Aug  1 00:00:23 kernel:  Scan in progress.. Cancelling it  
 +Aug  1 00:00:23 kernel: ol_scan_cancel for (82820000) 
 +Aug  1 00:00:23 kernel: OL vap_stop + 
 +Aug  1 00:00:23 kernel: wmi_unified_vdev_stop_send for vap 0 (82820000) 
 +Aug  1 00:00:23 kernel: OL vap_stop - 
 +Aug  1 00:00:23 kernel: STOPPED EVENT for vap 0 (82820000) 
 +Aug  1 00:00:23 kernel:  DEVICE IS DOWN ifname=ath1 
 +Aug  1 00:00:23 kernel:  DEVICE IS DOWN ifname=ath1 
 +Aug  1 00:00:23 kernel: OL vap_stop + 
 +Aug  1 00:00:23 kernel: wmi_unified_vdev_stop_send for vap 0 (82820000) 
 +Aug  1 00:00:23 kernel: OL vap_stop - 
 +Aug  1 00:00:23 kernel: STOPPED EVENT for vap 0 (82820000) 
 +Aug  1 00:00:23 kernel: Set freq vap 0 stop send + 83138000 
 +Aug  1 00:00:23 kernel: Set freq vap 0 stop send -83138000 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [33990] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x4 ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [33993] WHAL_ERROR_RECV_STOPDMA ( 0x0, 0x4 ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [33993] WHAL_ERROR_RESET_PM (  ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [34001] WAL_DBGID_DEV_RESET ( 0x0, 0x1, 0x1 ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [34009] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [34370] WAL_DBGID_SECURITY_ENCR_EN (  ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [34370] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) 
 +Aug  1 00:00:24 kernel: [wifi1] FWLOG: [34512] WHAL_ERROR_RESET_CHANNF1 (  ) 
 +Aug  1 00:00:26 kernel: mlme_create_infra_bss : Overriding HT40 channel with HT20 channel 
 +Aug  1 00:00:26 kernel: Set wait done --83138000 
 +Aug  1 00:00:26 kernel: Set freq vap 0 stop send + 83100000 
 +Aug  1 00:00:26 kernel: Set freq vap 0 stop send -83100000 
 +Aug  1 00:00:28 kernel: OL vap_start + 
 +Aug  1 00:00:28 kernel: wmi_unified_vdev_start_send for vap 0 (82820000) 
 +Aug  1 00:00:28 kernel: OL vap_start - 
 +Aug  1 00:00:28 kernel: ol_vdev_start_resp_ev for vap 0 (82820000) 
 +Aug  1 00:00:28 kernel: ol_ath_vap_join: join operation is only for STA/IBSS mode 
 +Aug  1 00:00:28 kernel: ol_ath_wmm_update: 
 +Aug  1 00:00:28 kernel: ol_if_dfs_configure: called 
 +Aug  1 00:00:28 kernel: ol_if_dfs_configure: ETSI domain 
 +Aug  1 00:00:28 kernel: ol_if_dfs_disable: called 
 +Aug  1 00:00:28 kernel: ol_if_dfs_enable: called 
 +Aug  1 00:00:28 kernel: cac_start chan 5500 timeout 62 sec, curr time: 4294695 sec 
 +Aug  1 00:00:28 kernel: Notification to UMAC VAP layer 
 +Aug  1 00:00:28 rc_service: httpd 266:notify_rc start_autodet 
 +Aug  1 00:00:28 kernel: Set wait done --83100000 
 +Aug  1 00:00:28 kernel: wmi_unified_vdev_stop_send for vap 0 (82820000) 
 +Aug  1 00:00:28 kernel: STOPPED EVENT for vap 0 (82820000) 
 +Aug  1 00:00:28 kernel: mlme_create_infra_bss : Overriding HT40 channel with HT20 channel 
 +Aug  1 00:00:33 kernel: OL vap_start + 
 +Aug  1 00:00:33 kernel: wmi_unified_vdev_start_send for vap 0 (82820000) 
 +Aug  1 00:00:33 kernel: OL vap_start - 
 +Aug  1 00:00:33 kernel: ol_vdev_start_resp_ev for vap 0 (82820000) 
 +Aug  1 00:00:33 kernel: ol_ath_vap_join: join operation is only for STA/IBSS mode 
 +Aug  1 00:00:33 kernel: ol_ath_wmm_update: 
 +Aug  1 00:00:33 kernel: ol_if_dfs_configure: called 
 +Aug  1 00:00:33 kernel: ol_if_dfs_configure: ETSI domain 
 +Aug  1 00:00:33 kernel: ol_if_dfs_disable: called 
 +Aug  1 00:00:33 kernel: ol_if_dfs_enable: called 
 +Aug  1 00:00:33 kernel: cac_start chan 5500 timeout 62 sec, curr time: 4294700 sec 
 +Aug  1 00:00:33 kernel: Notification to UMAC VAP layer 
 +Aug  1 00:01:35 kernel: cac_timeout cac expired, chan 5500 curr time 4294762 
 +Aug  1 00:01:35 kernel: wmi_unified_vdev_up_send for vap 0 (82820000) 
 +Aug  1 00:03:10 rc_service: plchost 290:notify_rc plc_upgrade 
 +Aug  1 00:03:16 rc_service: plchost 290:notify_rc plc_upgrade 
 +Aug  1 00:03:16 rc_service: skip the event: plc_upgrade. 
 +Aug  1 00:03:52 rc_service: httpd 266:notify_rc start_autodet 
 +Aug  1 00:04:15 rc_service: httpd 266:notify_rc chpass 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki> 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.000000] Linux version 5.10.113 (user@debian-x64) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19513+71-1eb4f62cb8) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Sun May 1 12:48:03 2022 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] printk: bootconsole [early0] enabled 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] MIPS: machine is ASUS PL-AC56 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Zone ranges: 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Movable zone start for each node 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Early memory node ranges 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    0.000000]   Normal zone: 144 pages used for memmap 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] Memory: 56188K/65536K available (5456K kernel code, 598K rwdata, 1196K rodata, 1188K init, 201K bss, 9348K reserved, 0K cma-reserved) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] NR_IRQS: 51 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3c0/0x5b0 with crng_init=0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] CPU clock: 775.000 MHz 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.008220] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.074759] pid_max: default: 32768 minimum: 301 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.079752] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.087463] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.097313] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.107596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.118000] futex hash table entries: 256 (order: -1, 3072 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.125271] pinctrl core: initialized pinctrl subsystem 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.131705] NET: Registered protocol family 16 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.186795] clocksource: Switched to clocksource MIPS 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.193210] NET: Registered protocol family 2 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.197995] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.206141] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.215046] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.223144] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.230591] TCP: Hash tables configured (established 1024 bind 1024) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.237416] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.244321] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.251945] NET: Registered protocol family 1 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.256565] PCI: CLS 0 bytes, default 32 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.266180] workingset: timestamp_bits=14 max_order=14 bucket_order=0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.276402] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.282609] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.296318] pinctrl-single 1804002c.pinmux: 544 pins, size 68 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.303353] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.310740] printk: console [ttyS0] disabled 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.315302] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.324451] printk: console [ttyS0] enabled 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.333512] printk: bootconsole [early0] disabled 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    0.353310] spi-nor spi0.0: mx25l12805d (16384 Kbytes) 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.358734] 5 fixed-partitions partitions found on MTD device spi0.0 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.365298] Creating 5 MTD partitions on "spi0.0": 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.370268] 0x000000000000-0x000000040000 : "u-boot" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.378888] 0x000000040000-0x000000050000 : "u-boot-env" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.385196] 0x000000050000-0x000000060000 : "art" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.392511] 0x000000060000-0x000000f80000 : "firmware" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.398875] 2 uimage-fw partitions found on MTD device firmware 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.405002] Creating 2 MTD partitions on "firmware": 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.410187] 0x000000000000-0x000000230000 : "kernel" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.417579] 0x000000230000-0x000000f20000 : "rootfs" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.423442] mtd: device 5 (rootfs) set to be root filesystem 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.430214] 1 squashfs-split partitions found on MTD device rootfs 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.436613] 0x000000600000-0x000000f20000 : "rootfs_data" 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    0.442997] 0x000000f80000-0x000001000000 : "plc" 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.170852] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.828305] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.839574] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.846140] i2c /dev entries driver 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.851512] NET: Registered protocol family 10 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.862269] Segment Routing with IPv6 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.866150] NET: Registered protocol family 17 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.870869] 8021q: 802.1Q VLAN Support v1.8 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.875891] PCI host bridge /ahb/pcie-controller@18250000 ranges: 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.882264]  MEM 0x0000000012000000..0x0000000013ffffff 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.887675]   IO 0x0000000000000000..0x0000000000000000 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.893246] PCI host bridge to bus 0000:00 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.897519] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.904620] pci_bus 0000:00: root bus resource [io  0x0000] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.910386] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.917407] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.925626] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.931881] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.938950] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.945944] pci 0000:00:00.0: supports D1 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.950098] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.956916] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.963776] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.971360] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref] 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    1.988105] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    2.001891] Freeing unused kernel memory: 1188K 
 +Sun May  1 14:49:33 2022 kern.warn kernel: [    2.006573] This architecture does not have kernel memory protection. 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    2.013260] Run /sbin/init as init process 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    2.017492]   with arguments: 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    2.017497]     /sbin/init 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    2.017500]   with environment: 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    2.017504]     HOME=/ 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [    2.017508]     TERM=linux 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    2.546831] random: fast init done 
 +Sun May  1 14:49:33 2022 user.info kernel: [    2.649385] init: Console is alive 
 +Sun May  1 14:49:33 2022 user.info kernel: [    2.653352] init: - watchdog - 
 +Sun May  1 14:49:33 2022 user.info kernel: [    3.784765] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +Sun May  1 14:49:33 2022 user.info kernel: [    3.825158] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +Sun May  1 14:49:33 2022 user.info kernel: [    3.843111] init: - preinit - 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    5.575578] random: jshn: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    5.633427] random: jshn: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    5.724425] random: jshn: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    6.916987] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    6.925342] eth0: link up (1000Mbps/Full duplex) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    6.941843] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +Sun May  1 14:49:33 2022 kern.info kernel: [    6.957359] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready 
 +Sun May  1 14:49:33 2022 kern.warn kernel: [    6.990665] urandom_read: 2 callbacks suppressed 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [    6.990672] random: procd: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [   11.370695] jffs2: notice: (449) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of xdatum (12 unchecked, 1 orphan) and 17 of xref (1 dead, 0 orphan) found. 
 +Sun May  1 14:49:33 2022 user.info kernel: [   11.388943] mount_root: switching to jffs2 overlay 
 +Sun May  1 14:49:33 2022 kern.warn kernel: [   11.401026] overlayfs: upper fs does not support tmpfile. 
 +Sun May  1 14:49:33 2022 user.warn kernel: [   11.413158] urandom-seed: Seeding with /etc/urandom.seed 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   11.538026] eth0: link down 
 +Sun May  1 14:49:33 2022 user.info kernel: [   11.560280] procd: - early - 
 +Sun May  1 14:49:33 2022 user.info kernel: [   11.563584] procd: - watchdog - 
 +Sun May  1 14:49:33 2022 user.info kernel: [   12.256736] procd: - watchdog - 
 +Sun May  1 14:49:33 2022 user.info kernel: [   12.262441] procd: - ubus - 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [   12.351354] random: ubusd: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [   12.360480] random: ubusd: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [   12.368019] random: ubusd: uninitialized urandom read (4 bytes read) 
 +Sun May  1 14:49:33 2022 user.info kernel: [   12.377804] procd: - init - 
 +Sun May  1 14:49:33 2022 user.info kernel: [   13.653856] kmodloader: loading kernel modules from /etc/modules.d/
 +Sun May  1 14:49:33 2022 user.info kernel: [   14.030709] urngd: v1.0.2 started. 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.160457] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.168335] Backport generated by backports.git v5.15.33-1-0-g183c4ab2 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [   14.213673] random: crng init done 
 +Sun May  1 14:49:33 2022 kern.notice kernel: [   14.217265] random: 1 urandom warning(s) missed due to ratelimiting 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.791489] PPP generic driver version 2.4.2 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.808491] NET: Registered protocol family 24 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.872690] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x3c. 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.897943] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002) 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   14.904590] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   18.722023] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   18.731611] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   18.743560] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   19.308793] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 
 +Sun May  1 14:49:33 2022 kern.warn kernel: [   20.298772] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   20.316666] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410' 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   20.322948] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   20.331240] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672' 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   20.387975] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   20.403228] ath10k_pci 0000:00:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.538299] ath: EEPROM regdomain: 0x0 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.538311] ath: EEPROM indicates default country code should be used 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.538315] ath: doing EEPROM country->regdmn map search 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.538328] ath: country maps to regdmn code: 0x3a 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.538334] ath: Country alpha2 being used: US 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.538338] ath: Regpair used: 0x3a 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.633538] ath: EEPROM regdomain: 0x0 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.633550] ath: EEPROM indicates default country code should be used 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.633554] ath: doing EEPROM country->regdmn map search 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.633568] ath: country maps to regdmn code: 0x3a 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.633574] ath: Country alpha2 being used: US 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.633578] ath: Regpair used: 0x3a 
 +Sun May  1 14:49:33 2022 kern.debug kernel: [   20.644536] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' 
 +Sun May  1 14:49:33 2022 kern.info kernel: [   20.646452] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2 
 +Sun May  1 14:49:33 2022 user.info kernel: [   20.687221] kmodloader: done loading kernel modules from /etc/modules.d/
 +Sun May  1 14:49:35 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! 
 +Sun May  1 14:49:35 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: DNS service limited to local subnets 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for test 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for onion 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for localhost 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for local 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for invalid 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for bind 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: using only locally-known addresses for lan 
 +Sun May  1 14:49:36 2022 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses 
 +Sun May  1 14:49:36 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses 
 +Sun May  1 14:49:36 2022 authpriv.info dropbear[1305]: Not backgrounding 
 +Sun May  1 14:49:40 2022 daemon.notice wpa_supplicant[1435]: Successfully initialized wpa_supplicant 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: bonding 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: 8021ad 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: 8021q 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: macvlan 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: veth 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: bridge 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: Network device 
 +Sun May  1 14:49:41 2022 user.notice : Added device handler type: tunnel 
 +Sun May  1 14:49:43 2022 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records in 
 +Sun May  1 14:49:43 2022 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records out 
 +Sun May  1 14:49:44 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network 
 +Sun May  1 14:49:44 2022 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless 
 +Sun May  1 14:49:44 2022 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall 
 +Sun May  1 14:49:44 2022 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall 
 +Sun May  1 14:49:44 2022 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall 
 +Sun May  1 14:49:45 2022 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp 
 +Sun May  1 14:49:45 2022 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount 
 +Sun May  1 14:49:46 2022 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led 
 +Sun May  1 14:49:46 2022 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system 
 +Sun May  1 14:49:46 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system 
 +Sun May  1 14:49:47 2022 daemon.notice procd: /etc/rc.d/S95done: chmod: /etc/init.d/plc_basic: No such file or directory 
 +Sun May  1 14:49:47 2022 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 8: /etc/init.d/plc_basic: not found 
 +Sun May  1 14:49:47 2022 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 9: /etc/init.d/plc_basic: not found 
 +Sun May  1 14:49:47 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN 
 +Sun May  1 14:49:47 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN5G 
 +Sun May  1 14:49:47 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN2G 
 +Sun May  1 14:49:48 2022 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces? 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.367099] eth0: link up (1000Mbps/Full duplex) 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.390098] br-lan: port 1(eth0.1) entered blocking state 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.395690] br-lan: port 1(eth0.1) entered disabled state 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.401594] device eth0.1 entered promiscuous mode 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.406546] device eth0 entered promiscuous mode 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.415060] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.447103] br-lan: port 1(eth0.1) entered blocking state 
 +Sun May  1 14:49:48 2022 kern.info kernel: [   38.452695] br-lan: port 1(eth0.1) entered forwarding state 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan' is enabled 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: bridge 'br-lan' link is up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan' has link connectivity 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan' is setting up now 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: VLAN 'eth0.1' link is up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan4' is enabled 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'loopback' is enabled 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'loopback' is setting up now 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'loopback' is now up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Network device 'eth0' link is up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: VLAN 'eth0.2' link is up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan4' has link connectivity 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan4' is setting up now 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'lan4' is now up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Network device 'lo' link is up 
 +Sun May  1 14:49:48 2022 daemon.notice netifd: Interface 'loopback' has link connectivity 
 +Sun May  1 14:49:49 2022 daemon.notice netifd: lan (2070): udhcpc: started, v1.35.0 
 +Sun May  1 14:49:49 2022 kern.info kernel: [   39.386881] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +Sun May  1 14:49:51 2022 daemon.notice netifd: lan (2070): udhcpc: broadcasting discover 
 +Sun May  1 14:49:51 2022 daemon.notice netifd: lan (2070): udhcpc: broadcasting select for 192.168.3.3, server 192.168.3.1 
 +Sun May  1 14:49:51 2022 daemon.notice netifd: lan (2070): udhcpc: lease of 192.168.3.3 obtained from 192.168.3.1, lease time 7200 
 +Sun May  1 14:49:51 2022 daemon.info procd: - init complete - 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.808780] ath: EEPROM regdomain: 0x8114 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.812933] ath: EEPROM indicates we should expect a country code 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.819278] ath: doing EEPROM country->regdmn map search 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.824758] ath: country maps to regdmn code: 0x37 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.829716] ath: Country alpha2 being used: DE 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.834299] ath: Regpair used: 0x37 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.837904] ath: regdomain 0x8114 dynamically updated by user 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.843913] ath: EEPROM regdomain: 0x8114 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.848071] ath: EEPROM indicates we should expect a country code 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.854360] ath: doing EEPROM country->regdmn map search 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.859846] ath: country maps to regdmn code: 0x37 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.864790] ath: Country alpha2 being used: DE 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.869378] ath: Regpair used: 0x37 
 +Sun May  1 14:49:52 2022 kern.debug kernel: [   41.872980] ath: regdomain 0x8114 dynamically updated by user 
 +Sun May  1 14:49:52 2022 daemon.notice netifd: Interface 'lan' is now up 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using nameserver 192.168.3.1#53 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for test 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for onion 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for localhost 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for local 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for invalid 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for bind 
 +Sun May  1 14:49:52 2022 daemon.info dnsmasq[1]: using only locally-known addresses for lan 
 +Sun May  1 14:49:53 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) 
 +Sun May  1 15:09:27 2022 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY 
 +Sun May  1 15:09:27 2022 kern.info kernel: [   45.080919] br-lan: port 2(wlan1) entered blocking state 
 +Sun May  1 15:09:27 2022 kern.info kernel: [   45.086417] br-lan: port 2(wlan1) entered disabled state 
 +Sun May  1 15:09:27 2022 kern.info kernel: [   45.092262] device wlan1 entered promiscuous mode 
 +Sun May  1 15:09:27 2022 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE 
 +Sun May  1 15:09:28 2022 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->HT_SCAN 
 +Sun May  1 15:09:28 2022 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY 
 +Sun May  1 15:09:29 2022 daemon.notice netifd: Wireless device 'radio1' is now up 
 +Sun May  1 15:09:29 2022 kern.warn kernel: [   46.979502] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   46.997451] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410' 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   47.003726] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   47.012032] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672' 
 +Sun May  1 15:09:29 2022 kern.warn kernel: [   47.084407] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   47.100094] ath10k_pci 0000:00:00.0: rts threshold -1 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   47.115884] br-lan: port 3(wlan0) entered blocking state 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   47.121437] br-lan: port 3(wlan0) entered disabled state 
 +Sun May  1 15:09:29 2022 kern.info kernel: [   47.127219] device wlan0 entered promiscuous mode 
 +Sun May  1 15:09:29 2022 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE 
 +Sun May  1 15:09:29 2022 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN 
 +Sun May  1 15:09:30 2022 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=13 sec=9 based on overlapping BSSes 
 +Sun May  1 15:09:30 2022 daemon.notice hostapd: Fallback to 20 MHz 
 +Sun May  1 15:09:30 2022 daemon.notice netifd: lan (2070): udhcpc: sending renew to server 192.168.3.1 
 +Sun May  1 15:09:30 2022 daemon.notice netifd: lan (2070): udhcpc: lease of 192.168.3.3 obtained from 192.168.3.1, lease time 7200 
 +Sun May  1 15:09:30 2022 kern.info kernel: [   47.886503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 
 +Sun May  1 15:09:30 2022 kern.info kernel: [   47.893303] br-lan: port 2(wlan1) entered blocking state 
 +Sun May  1 15:09:30 2022 kern.info kernel: [   47.898845] br-lan: port 2(wlan1) entered forwarding state 
 +Sun May  1 15:09:30 2022 daemon.notice netifd: Network device 'wlan1' link is up 
 +Sun May  1 15:09:31 2022 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED 
 +Sun May  1 15:09:31 2022 daemon.notice hostapd: wlan1: AP-ENABLED 
 +Sun May  1 15:09:31 2022 daemon.notice netifd: Wireless device 'radio0' is now up 
 +Sun May  1 15:09:31 2022 daemon.notice netifd: lan (2070): udhcpc: sending renew to server 192.168.3.1 
 +Sun May  1 15:09:31 2022 daemon.notice netifd: lan (2070): udhcpc: lease of 192.168.3.3 obtained from 192.168.3.1, lease time 7200 
 +Sun May  1 15:09:32 2022 daemon.notice hostapd: wlan0: interface state HT_SCAN->DFS 
 +Sun May  1 15:09:32 2022 daemon.notice hostapd: wlan0: DFS-CAC-START freq=5540 chan=108 sec_chan=1, width=1, seg0=106, seg1=0, cac_time=60s 
 +Sun May  1 15:10:32 2022 user.info : luci: accepted login on / for root from 192.168.3.22 
 +Sun May  1 15:10:33 2022 daemon.notice hostapd: wlan0: DFS-CAC-COMPLETED success=1 freq=5540 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0 
 +Sun May  1 15:10:33 2022 kern.info kernel: [  110.592906] ath10k_pci 0000:00:00.0: mac flush null vif, drop 0 queues 0xffff 
 +Sun May  1 15:10:33 2022 kern.info kernel: [  110.726344] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 
 +Sun May  1 15:10:33 2022 kern.info kernel: [  110.733230] br-lan: port 3(wlan0) entered blocking state 
 +Sun May  1 15:10:33 2022 kern.info kernel: [  110.738786] br-lan: port 3(wlan0) entered forwarding state 
 +Sun May  1 15:10:33 2022 daemon.notice netifd: Network device 'wlan0' link is up 
 +Sun May  1 15:10:33 2022 daemon.notice hostapd: wlan0: interface state DFS->ENABLED 
 +Sun May  1 15:10:33 2022 daemon.notice hostapd: wlan0: AP-ENABLED 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
 ===== Notes ===== ===== Notes =====
-=== This paragraph will be moved to the installation how-to ===+=== This paragraph will be moved to the installation how-to, once the device got supported ===
 \\ \\
 The complete installation needs additional steps after flashing OpenWRT, due to the PLC (Powerline) components.\\ The complete installation needs additional steps after flashing OpenWRT, due to the PLC (Powerline) components.\\
 +\\
 +  * Install required plc packages:\\
 +<code>
 +opkg update
 +opkg install open-plc-utils-hpavkey
 +opkg install open-plc-utils-modpib
 +opkg install open-plc-utils-plchost
 +opkg install open-plc-utils-plctool
 +</code>
 +\\
 +  * Gather the plc firmware:\\
 +Note that due to legal reasons, it is not allowed to include or enlist the plc firmware files freely,\\
 +thus you need to find it yourself. You can start here by extracting MAC-7500-v2.8.0-01-NW6__-X-CS.nvm\\
 +from the deb package:\\
 +https://update.devolo.com/linux2/apt/pool/main/d/devolo-firmware-qca7500/\\
 +After a lot of testing, I found the above particular firmware the most stable (until inclusive v 2.11.0).\\
 +Another possibility is to gather the original (and old) nvm firmware from the PL-AC56 source files from Asus.\\
 +You have then to copy the nvm firmware to let's say root directory onto the router.\\
 +\\
 +  * Create and run plc controlling scripts:\\
 +ssh into the same directory, where you put the nvm file, let's say /root again\\
 +and copy-paste the following script and simply press Enter to run it:\\
 +<code bash>
 +cat > /etc/init.d/plc_basic <<'EOF'
 +#!/bin/sh /etc/rc.common
 +
 +START=96
 +STOP=10
 +
 +. /lib/functions/system.sh
 +
 +p="plc_basic:"
 +fwpath="/lib/plc"
 +
 +# create config file on first start
 +if [ ! -f /etc/config/plc -o "$(uci show plc 2>/dev/null)" = "" ]; then
 +touch /etc/config/plc
 +uci set plc.config=config
 +uci commit plc
 +fi
 +
 +echo -n "$p plcenable "
 +plcenable=$(uci get plc.config.Enabled 2>/dev/null)
 +if [ -z "${plcenable}" ]; then
 +plcenable=0
 +echo -n "$p setting to "
 +uci set plc.config.Enabled=${plcenable}
 +fi
 +echo $plcenable
 +
 +countrycode=$(uci get plc.config.Countrycode 2>/dev/null)
 +if [ -z "${countrycode}" ]; then
 +countrycode="EU"
 +uci set plc.config.Countrycode=${countrycode}
 +fi
 +
 +echo -n "$p plcnetwork "
 +plcnetwork=$(uci get plc.config.Network 2>/dev/null)
 +if [ -z "${plcnetwork}" ]; then
 +plcnetwork="lan"
 +echo -n "$p setting to "
 +uci set plc.config.Network=${plcnetwork}
 +fi
 +echo $plcnetwork
 +
 +plcbridge=br-${plcnetwork}
 +echo "$p plcbridge $plcbridge"
 +
 +board=$(board_name)
 +echo "$p board name $board"
 +case $board in
 +asus,pl-ac56)
 +region=$countrycode
 +pibregion="CEB"
 +
 +# check if we have a pib in plc partition
 +ident="$(dd if=/dev/mtd7 skip=528 count=11 iflag=skip_bytes,count_bytes \
 +2>/dev/null)"
 +expect="PIB-QCA7500"
 +if [[ $ident != $expect ]]; then
 +echo "$p Fatal: PIB file is not in PLC partition, or differs:"
 +echo "$p instead of \"$expect\" this is found there: \"$ident\""
 +echo "$p You have to restore the partitions either manually,"
 +echo "$p or reflashing the latest Asus FW, pair the PLC devices,"
 +echo "$p then flash OpenWRT again."
 +exit 1
 +fi
 +
 +pibpath="$fwpath/QCA7500-WallAdapter_EN50561-1.pib"
 +nvmpath="$fwpath/plc_firmware.nvm"
 +# get pib from plc partition
 +dd if=/dev/mtd7 of=$fwpath/QCA7500-WallAdapter_EN50561-1.pib \
 +bs=22344 skip=16 count=22344 iflag=skip_bytes,count_bytes 2>/dev/null
 +
 +# default vlan2 device = lan4
 +plcinterface=$(uci get network.lan4.device)
 +echo "$p plcinterface $plcinterface"
 +[ -z "$plcinterface" ] && exit 1
 +;;
 +*)
 +# no known bootable PLC adapters in board
 +exit 1
 +;;
 +esac
 +
 +mtd_get_key() {
 +local mtdname="$1"
 +local key="$2"
 +local part
 +local value_dirty
 +
 +part=$(find_mtd_part "$mtdname")
 +if [ -z "$part" ]; then
 +echo "$p mtd_get_key: partition $mtdname not found!" >&2
 +return
 +fi
 +value_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
 +echo "$p $value_dirty"
 +}
 +
 +start() {
 +# set the mac
 +echo -n "$p plcmac "
 +mac=$(uci get plc.config.Mac 2>/dev/null)
 +if [ -z "$mac" ]; then
 +mac=$(mtd_get_mac_binary art 0xd18e)
 +echo -n "$p setting from art "
 +uci set plc.config.Mac=${mac}
 +fi
 +echo $mac
 +if [ ! -z "$mac" ]; then
 +modpib -M $mac $pibpath
 +fi
 +
 +# set the nmk
 +echo -n "$p plcnmk "
 +if [ -z "$(uci get plc.config.Nmk 2>/dev/null)" ]; then
 +nmk=$(hexdump -v -n 16 -s 0xd194 \
 +-e '15/1 "%02x:" 1/1 "%02x"' $(find_mtd_part "art"))
 +echo -n "$p setting from art "
 +uci set plc.config.Nmk=${nmk}
 +fi
 +
 +uci set plc.config.NmkSelected=true
 +networkpwd=$(uci get plc.config.NetworkPasswd 2>/dev/null)
 +nmkselected=$(uci get plc.config.NmkSelected 2>/dev/null)
 +if [ 'true' = "${nmkselected}" ]; then
 +nmk=$(uci get plc.config.Nmk 2>/dev/null)
 +elif [ ! -z ${networkpwd} ]; then
 +nmk=$(hpavkey -M ${networkpwd})
 +else
 +nmk=''
 +uci set plc.config.Nmk=${nmk}
 +uci set plc.config.NmkSelected=false
 +uci set plc.config.NetworkPasswd=HomePlugAV
 +fi
 +echo $nmk
 +if [ ! -z "$nmk" ]; then
 +modpib -N $nmk $pibpath
 +fi
 +
 +# set the dak
 +dek=$(uci get plc.config.Dek 2>/dev/null)
 +if [ -z "${dek}" ]; then
 +dak=$(uci get plc.config.Dak 2>/dev/null)
 +if [ -z "${dak}" ]; then
 +dek=HomePlugAV
 +if [ ! -z "${dek}" ]; then
 +dak=$(hpavkey -D ${dek})
 +uci set plc.config.Dek=$dek
 +uci set plc.config.Dak=$dak
 +else
 +uci set plc.config.Dek=''
 +fi
 +else
 +uci set plc.config.Dak=''
 +fi
 +else
 +dak=$(hpavkey -D ${dek})
 +uci get plc.config.Dak=$dak
 +fi
 +if [ ! -z "$dak" ]; then
 +modpib -D ${dak} $pibpath
 +fi
 +
 +# set USR (not MFG for now)
 +USR=$(uci get plc.config.AdapterName 2>/dev/null)
 +if [ -z "${USR}" ]; then
 +USR=$(uci get system.@system[0].hostname)
 +uci set plc.config.AdapterName=$USR
 +fi
 +modpib -U "${USR}" ${pibpath} # for now not using  -S ${MFG}
 +
 +# plc_enable gpio is active low
 +echo 0 > /sys/class/gpio/gpio14/value
 +plcenable=1
 +uci set plc.config.Enabled=$plcenable
 +echo "$p plcenable 1"
 +
 +# commit any (possible initial) changes to the config
 +if [ ! -z "$(uci changes plc)" ]; then
 +uci commit plc
 +fi
 +
 +# no rush
 +sleep 1
 +
 +# boot up plchost
 +if [ "${plcenable}" -eq 1 ]; then
 +# plchost junks user.nvm and user.pib files..
 +cd $fwpath
 +echo "$p start plchost"
 +plchost -i $plcinterface -N $nvmpath -P $pibpath &
 +( i=0; while [ $i -le 20 ]; do
 +sleep 3
 +if [[ "$(plctool -i $plcinterface -m)" =~ "station->MAC" ]]; then
 +# no rush
 +sleep 1
 +echo "$p Adding ${plcinterface} to ${plcbridge}"
 +brctl addif ${plcbridge} ${plcinterface}
 +exit 0
 +fi
 +i=$((i+1))
 +done
 +echo "$p Timeout waiting for plchost..."
 +echo "$p not configuring $plcbridge"
 +exit 1
 +) &
 +fi
 +}
 +
 +stop() {
 +# remove adapter from it's network bridge
 +echo "$p Removing ${plcinterface} from ${plcbridge}"
 +brctl delif ${plcbridge} ${plcinterface}
 +killall -9 plchost
 +
 +# no rush
 +sleep 1
 +
 +# resets the adapter (resp all adapters!) into bootloader mode
 +#plctool -i $plcinterface -R
 +plctool -i $plcinterface -R $(uci get plc.config.Mac)
 +
 +# plc_enable gpio is active low
 +echo 1 > /sys/class/gpio/gpio14/value
 +plcenable=0
 +uci set plc.config.Enabled=$plcenable
 +echo "$p plcenable 0"
 +
 +# commit any (possible initial) changes to the config
 +if [ ! -z "$(uci changes plc)" ]; then
 +uci commit plc
 +fi
 +}
 +
 +EOF
 +chmod +x /etc/init.d/plc_basic
 +mkdir /lib/plc
 +mv ./MAC*.nvm /lib/plc
 +ln -s /lib/plc/MAC*.nvm /lib/plc/plc_firmware.nvm
 +/etc/init.d/plc_basic enable
 +sleep 3
 +/etc/init.d/plc_basic start
 +cat > /etc/rc.button/BTN_0 <<'EOF'
 +#!/bin/sh
 +
 +echo "${BUTTON} ${ACTION}" > /dev/console
 +
 +echo "Stopping Powerline via plc_basic" > /dev/console
 +/etc/init.d/plc_basic stop
 +
 +/etc/rc.button/reset
 +
 +EOF
 +chmod +x /etc/rc.button/BTN_0
 +</code>
 +After this, you should see an output like this:
 +<code>
 +plc_basic: plcenable 0
 +plc_basic: plcnetwork lan
 +plc_basic: plcbridge br-lan
 +plc_basic: board name asus,pl-ac56
 +plc_basic: plcinterface eth0.2
 +root@PL-AC56:~# sleep 3
 +root@PL-AC56:~# /etc/init.d/plc_basic start
 +plc_basic: plcenable 0
 +plc_basic: plcnetwork lan
 +plc_basic: plcbridge br-lan
 +plc_basic: board name asus,pl-ac56
 +plc_basic: plcinterface eth0.2
 +plc_basic: plcmac xx:xx:xx:xx:xx:xx
 +plc_basic: plcnmk xx:xx...
 +plc_basic: plcenable 1
 +plc_basic: start plchost
 +.
 +.
 +.
 +root@PL-AC56:~# eth0.2 00:B0:52:00:00:01 Write /lib/plc/plc_firmware.nvm (1) (00000040:32096)
 +eth0.2 00:B0:52:00:00:01 Start /lib/plc/plc_firmware.nvm (1) (000000C0)
 +eth0.2 00:B0:52:00:00:01 Write /lib/plc/QCA7500-WallAdapter_EN50561-1.pib (1) (00400000:22344)
 +eth0.2 00:B0:52:00:00:01 Write /lib/plc/plc_firmware.nvm (4) (0057BD30:506172)
 +eth0.2 00:B0:52:00:00:01 Start /lib/plc/plc_firmware.nvm (4) (0057C120)
 +eth0.2 18:31:BF:68:0E:13 MAC-QCA7500-2.8.0.30-01-20190705-CS is running
 +eth0.2 00:B0:52:00:00:01 Fetch Network Information
 +eth0.2 18:31:BF:68:0E:13 Found 1 Network(s)
 +
 +plc_basic: Adding eth0.2 to br-lan
 +
 +</code>
 +At this point you should have a fully functional device.\\
 +You can also start/stop the plc service manually if needed:\\
 +<code>
 +service plc_basic <start/stop>
 +</code>
 +
 +\\
 +  * (Optional but recommended) Update the slave Asus device (PL-E56P) firmware:\\
 +Notes about flashing:\\
 +The main device PL-AC56 has no firmware (nvm) storage, only a\\
 +calibration file (pib), which will be copied from the dedicated plc partition.\\
 +The slave device PL-E56P has its own nvm and pib files stored\\
 +and the nvm can/should be flashed to the same version, as the parent\\
 +device, e.g. with the same file from above.\\
 +Briefly it is done first by looking up the Mac Address of the slave\\
 +device on the parent device, by looking at the station's Mac address:\\
 +<code>
 +plctool -i br-lan -m
 +</code>
 +If the br-lan is not including the vlan (it should), use eth0.2 instead.\\
 +Then backup the pib of the slave device:\\
 +<code>
 +plctool -i br-lan -p /tmp/backup.pib station_mac_address
 +</code>
 +Then flash the new firmware (nvm), together with the backed up pib:\\
 +<code>
 +plctool -i br-lan -N nvm_file -P /tmp/backup.pib station_mac_address
 +</code>
 +Maybe it needs a reboot too, after finished flashing:\\
 +<code>
 +plctool -i br-lan -R station_mac_address
 +</code>
 +Maybe it is needed to pair the devices again after this.\\
 +\\
 +  * (Optional but recommended) Install zram-swap:\\
 +The 64MB RAM will go low pretty quickly, so it is a good idea to at least\\
 +use something like zram-swap, which pops up a swap area.\\
 +<code>
 +opkg update
 +opkg install zram-swap
 +</code>
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
 {{tag>EXAMPLETAG unsupported}} {{tag>EXAMPLETAG unsupported}}
  • Last modified: 2022/05/13 13:24
  • by therealsummoner