Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
inbox:toh:asus:asus_rt-n12e_c1 [2020/12/13 08:57] – [Bootlogs] ambassador86inbox:toh:asus:asus_rt-n12e_c1 [2020/12/13 09:38] – [JTAG] ambassador86
Line 43: Line 43:
 ===== Hardware highlights ===== ===== Hardware highlights =====
 ^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^ ^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^
-EXAMPLE RT3052 384 MHz   |  64 MiB  |  8 MiB  |  4x 10/100  |  bgn    1x 2.0  |   Yes    |      |+MediaTek MT7628 575 MHz   |  32 MiB  |  8 MiB  |  4x 10/100  |  bgn      |   Yes    |   no    |
  
  
Line 111: Line 111:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-^ Architecture     EXAMPLE MIPS                             | +^ Architecture     | MIPS                             | 
-^ Vendor           EXAMPLE Ralink                           +^ Vendor           Asus 
-^ Bootloader       EXAMPLE U-Boot                           +^ Bootloader       | U-Boot 1.1.5                     
-^ System-On-Chip   EXAMPLE Ralink RT3052 - MIPS 24K V4.12   +^ System-On-Chip   MediaTek 7628
-^ CPU/Speed        | EXAMPLE 451 MHz                          | +^ CPU/Speed        | 575 MHz                          | 
-^ Flash-Chip       EXAMPLE unkown                           +^ Flash-Chip       W25Q64BV                          
-^ Flash size       EXAMPLE 8 MiB                            | +^ Flash size       | 8 MiB                            | 
-^ RAM              | EXAMPLE 64 MiB                           |+^ RAM              | 32 MiB                           |
 ^ Wireless         | EXAMPLE RT2860v2 2.4GHz 802.11bgn        | ^ Wireless         | EXAMPLE RT2860v2 2.4GHz 802.11bgn        |
 ^ Ethernet         | EXAMPLE 10/100 Mbit/s w/ vlan support    | ^ Ethernet         | EXAMPLE 10/100 Mbit/s w/ vlan support    |
 ^ Switch           | EXAMPLE Qualcomm Atheros QCA8337         | ^ Switch           | EXAMPLE Qualcomm Atheros QCA8337         |
-^ USB              | EXAMPLE 1x 2.0                           | +^ Serial           | [[#Serial|Not Populated]]                  |
-^ Serial           EXAMPLE [[#Serial|Yes]]                  +
-^ JTAG             | EXAMPLE [[#JTAG|Not populated]]          |+
  
  
Line 169: Line 167:
 ^ Serial connection parameters\\ for ASUS RT-N12E C1 | EXAMPLE 115200, 8N1 | ^ Serial connection parameters\\ for ASUS RT-N12E C1 | EXAMPLE 115200, 8N1 |
  
-==== JTAG ==== 
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. 
- 
-How to connect to the JTAG Port of this specific device:\\ 
-**Insert photo of PCB with markings for JTAG port** 
  
 ===== Bootlogs ===== ===== Bootlogs =====
Line 180: Line 173:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+U-Boot 1.1.5 (Mar 25 2016 - 13:59:20) 
 + 
 +ASUS PRODUCT bootloader version: 1.0.0.2 
 +Board: Ralink APSoC DRAM:  32 MB 
 +ASUS ASUS PRODUCT gpio init : reset pin 
 +flash manufacture id: ef, device id 40 17 
 +find flash: W25Q64BV 
 +raspi_read: from:40035 len:1  
 +raspi_read: from:40036 len:1  
 +raspi_read: from:30000 len:1000  
 +Maximum malloc length: 1024 KBytes 
 +mem_malloc_start/brk/end: 0x81eb3000/81eb5000/81fb4000 
 +*** Warning - bad CRC, using default environment 
 + 
 +============================================  
 +Ralink UBoot Version: 4.3.0.0 
 +--------------------------------------------  
 +ASIC 7628_MP (Port5<->None) 
 +DRAM component: 256 Mbits DDR, width 16 
 +DRAM bus: 16 bit 
 +Total memory: 32 MBytes 
 +Flash component: SPI Flash 
 +Date:Mar 25 2016  Time:13:59:20 
 +============================================  
 +icache: sets:512, ways:4, linesz:32 ,total:65536 
 +dcache: sets:256, ways:4, linesz:32 ,total:32768  
 +RESET MT7628 PHY!!!!!! 
 +Please choose the operation:  
 +   0: Load System code then write to Flash via Serial.  
 +   1: Load System code to SDRAM via TFTP.  
 +   2: Load System code then write to Flash via TFTP.  
 +   3: Boot System code via Flash (default). 
 +   4: Entr boot command line interface. 
 +   7: Load Boot Loader code then write to Flash via Serial.  
 +   9: Load Boot Loader code then write to Flash via TFTP.  
 + 0  
 +    
 +3: System Boot System code via Flash. 
 +raspi_read: from:4018a len:4  
 + 
 +ASUS PRODUCT bootloader version: 1.0.0.2 
 +raspi_read: from:40004 len:6  
 +MAC Address: 18:31:BF:65:BA:6C 
 +raspi_read: from:40004 len:6  
 + 
 +## Checking 1st firmware at bc050000 ... 
 +raspi_read: from:50000 len:40  
 +   Image Name:    
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +   Data Size:    7651544 Bytes =  7.3 MB 
 +   Load Address: 80000000 
 +   Entry Point:  8000c150 
 +raspi_read: from:50040 len:74c0d8  
 +   Verifying Checksum ... OK 
 +   Uncompressing Kernel Image ... OK 
 +## Giving linux ramsize: 33554432 (32 MB) 
 + 
 +Starting kernel ... 
 + 
 + 
 +LINUX started... 
 + 
 + THIS IS ASIC 
 +Linux version 2.6.36 (root@asus) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 Mon May 11 10:00:56 CST 2020 
 + 
 + The CPU feqenuce set to 575 MHz 
 +CPU revision is: 00019655 (MIPS 24Kc) 
 +Software DMA cache coherency 
 +Determined physical RAM map: 
 + memory: 02000000 @ 00000000 (usable) 
 +Initrd not found or empty - disabling initrd 
 +Zone PFN ranges: 
 +  Normal   0x00000000 -> 0x00002000 
 +Movable zone start PFN for each node 
 +early_node_map[1] active PFN ranges 
 +    0: 0x00000000 -> 0x00002000 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128 
 +Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs,noinitrd 
 +PID hash table entries: 128 (order: -3, 512 bytes) 
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) 
 +Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes. 
 +Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +Writing ErrCtl register=0007e10e 
 +Readback ErrCtl register=0007e10e 
 +Memory: 28712k/32768k available (2579k kernel code, 4056k reserved, 743k data, 168k init, 0k highmem) 
 +SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +NR_IRQS:128 
 +console [ttyS1] enabled 
 +Calibrating delay loop... 382.97 BogoMIPS (lpj=765952) 
 +pid_max: default: 32768 minimum: 301 
 +Mount-cache hash table entries: 512 
 +NET: Registered protocol family 16 
 +bio: create slab <bio-0> at 0 
 +Switching to clocksource MIPS 
 +NET: Registered protocol family 2 
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes) 
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP: Hash tables configured (established 1024 bind 1024) 
 +TCP reno registered 
 +UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +NET: Registered protocol family 1 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +JFFS2 version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc. 
 +msgmni has been set to 56 
 +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) 
 +io scheduler noop registered (default) 
 +Ralink gpio driver initialized 
 +Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A 
 +serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A 
 +brd: module loaded 
 +flash manufacture id: ef, device id 40 17 
 +W25Q64BV(ef 40170000) (8192 Kbytes) 
 +mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 
 +partion 3: ffffffff 7b0000 
 +partion 4: 17f600 680a00 
 +#add mtd partition# 
 +Creating 6 MTD partitions on "raspi": 
 +0x000000000000-0x000000030000 : "Bootloader" 
 +0x000000030000-0x000000040000 : "nvram" 
 +0x000000040000-0x000000050000 : "Factory" 
 +0x000000050000-0x000000800000 : "linux" 
 +0x00000017f600-0x000000800000 : "rootfs" 
 +0x000000000000-0x000000800000 : "ALL" 
 +rdm_major = 253 
 +GMAC1_MAC_ADRH -- : 0x0000000c 
 +GMAC1_MAC_ADRL -- : 0x43e17629 
 +Ralink APSoC Ethernet Driver Initilization. v3.1  512 rx/tx descriptors allocated, mtu = 1500! 
 +GMAC1_MAC_ADRH -- : 0x0000000c 
 +GMAC1_MAC_ADRL -- : 0x43e17629 
 +PROC INIT OK! 
 +PPP generic driver version 2.4.2 
 +PPP Deflate Compression module registered 
 +PPP MPPE Compression module registered 
 +NET: Registered protocol family 24 
 +PPTP driver version 0.8.5 
 +IMQ driver loaded successfully. 
 +        Hooking IMQ before NAT on PREROUTING. 
 +        Hooking IMQ after NAT on POSTROUTING. 
 +u32 classifier 
 +nf_conntrack version 0.5.0 (448 buckets, 1792 max) 
 +matchsize=264 
 +xt_time: kernel timezone is -0000 
 +GRE over IPv4 demultiplexor driver 
 +gre: can't add protocol 
 +ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux 
 +arp_tables: (C) 2002 David S. Miller 
 +TCP cubic registered 
 +NET: Registered protocol family 10 
 +ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +NET: Registered protocol family 17 
 +L2TP core driver, V2.0 
 +PPPoL2TP kernel driver, V2.0 
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> 
 +All bugs added by David S. Miller <davem@redhat.com> 
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:4. 
 +Freeing unused kernel memory: 168k freed 
 +offset 0x8000 elapse 0ms 
 +bled: Unknown symbol irq_to_desc (err 0) 
 +1: set_action 0 
 + 
 + 
 +Hit ENTER for console... 
 + 
 +firmware version: 3.0.0.4.380_10931-gfed566f 
 +mtd productid: RT-N11P_B1 
 +bootloader version: RT-N11P_B1-01-00-00-02 
 +firmware version: 3.0.0.4 
 +odmpid: RT-N12E 
 +current FW productid: RT-N11P_B1 
 +current FW firmver: 3.0.0.4 
 +clean_mode(1) clean_time(2) threshold(0) 
 +free_caches: Start syncing... 
 +free_caches: Start cleaning... 
 +free_caches: waiting 2 second... 
 +free_caches: Finish. 
 +[1 init:init_nvram +8] init_nvram for model(65) 
 +set_basic_ifname_vars: WAN vlan2 LAN vlan1 2G ra0 5G N/A USB (null) AP_LAN vlan1 DW_WAN (null) DW_LAN vlan3 force_dwlan 0, sw_mode 1 
 +wan_ifnames: vlan2 
 +__config_swports_bled: open /dev/bled fail. (No such file or directory) 
 +__config_swports_bled: open /dev/bled fail. (No such file or directory) 
 +num_of_mssid_support(0x0093): [mssid] support [3] mssid 
 +mt_wifi_7628: module license 'Proprietary' taints kernel. 
 +Disabling lock debugging due to kernel taint 
 + 
 + 
 +=== pAd = c0509000, size = 1190152 === 
 + 
 +<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x 
 +<-- RTMPAllocAdapterBlock, Status=0 
 +RtmpChipOpsHook(492): Not support for HIF_MT yet! 
 +mt7628_init()--> 
 +mt7628_init(FW(8a00), HW(8a01), CHIPID(7628)) 
 +e2.bin mt7628_init(1117)::(2), pChipCap->fw_len(63360) 
 +mt_bcn_buf_init(218): Not support for HIF_MT yet! 
 +<--mt7628_init() 
 +hotplug net INTERFACE=ra0 ACTION=add 
 +start_logger: 
 +)ifconfig: name=Raeth v3.1 (eth2 flags=1043 TaskletIFUP addr=(null),SkbRecycle netmask=(null) 
 + 
 + 
 +phy_tx_ring = 0x00a8c000, tx_ring = 0xa0a8c000 
 + 
 +phy_rx_ring0 = 0x00a8e000, rx_ring0 = 0xa0a8e000 
 +GMAC1_MAC_ADRH -- : 0x00001831 
 +GMAC1_MAC_ADRL -- : 0xbf65ba6c 
 +RT305x_ESW: Link Status Changed 
 +hotplug net INTERFACE=vlan1 ACTION=add 
 +hotplug net INTERFACE=vlan2 ACTION=add 
 +config_switch(0x014a): link down all ports 
 +Algorithmics/MIPS FPU Emulator v1.5 
 +config_mt7628_esw_LANWANPartition: LAN/WAN/WANS_LAN portmask 0000000f/00000010/00000000 
 +mt7628_reg_write()..offset=  14, value=  405555 
 +config_mt7628_esw_LANWANPartition: PVIDC0 - 00001001 
 +mt7628_reg_write()..offset=  40, value=    1001 
 +config_mt7628_esw_LANWANPartition: PVIDC1 - 00001001 
 +mt7628_reg_write()..offset=  44, value=    1001 
 +config_mt7628_esw_LANWANPartition: PVIDC2 - 00001002 
 +mt7628_reg_write()..offset=  48, value=    1002 
 +mt7628_reg_write()..offset=  50, value=    2001 
 +config_mt7628_esw_LANWANPartition: VMSC - ff00504f 
 +mt7628_reg_write()..offset=  70, value=ff00504f 
 +mt7628_reg_write()..offset=  98, value=    ff3f 
 +[set_Vlan_untag][714] idx = 0, untag_mask = 15 
 +mt7628_reg_write()..offset= 100, value=       f 
 +[set_Vlan_untag][714] idx = 1, untag_mask = 16 
 +mt7628_reg_write()..offset= 100, value=     80f 
 +config_switch(0x0184): ISP Profile/STB: none/0 
 +config_switch(0x037a): link up wan port(s) 
 +update_lan_state(lan_, 0, 0) 
 +start_lan: setting up the bridge br0 
 +_ifconfig: name=vlan1 flags=1243 IFUP addr=(null) netmask=(null) 
 +start_lan: setting MAC of br0 bridge to 18:31:BF:65:BA:6C 
 +gen ralink config 
 +gen_ralink_conficheck_runtime_para 650: match 
 +g(0x03b0): Main TX_BCN DESC a0911000 size = 320 
 +BSSID is not mulRX[0] DESC a0913000 size = 2048 
 +tiple of 4s!warnRX[1] DESC a0916000 size = 1024 
 +ing: 50!!!! 
 +Miss some configuration, please check!!!! 
 +_ifconfig: name=ra0 flags=1243 IFUP addr=(null) netmask=cfg_mode=9 
 +(null) 
 +hotplug cfg_mode=9 
 +net INTERFACE=brwmode_band_equal(): Band Equal! 
 +0 ACTION=add 
 +APSDCapable[0]=1 
 +APSDCapable[1]=1 
 +APSDCapable[2]=1 
 +APSDCapable[3]=1 
 +APSDCapable[4]=1 
 +APSDCapable[5]=1 
 +APSDCapable[6]=1 
 +APSDCapable[7]=1 
 +APSDCapable[8]=1 
 +APSDCapable[9]=1 
 +APSDCapable[10]=1 
 +APSDCapable[11]=1 
 +APSDCapable[12]=1 
 +APSDCapable[13]=1 
 +APSDCapable[14]=1 
 +APSDCapable[15]=1 
 +default ApCliAPSDCapable[0]=1 
 +Key1Str is Invalid key length(0) or Type(0) 
 +Key2Str is Invalid key length(0) or Type(0) 
 +Key3Str is Invalid key length(0) or Type(0) 
 +Key4Str is Invalid key length(0) or Type(0) 
 +LEDMethod = 1 
 +RTMPReadParametersHook 269: don't change config 
 +RTMPSetDefaultChannel() : default channel to 1  
 +load fw image from fw_header_image 
 +AndesMTLoadFwMethod1(2174)::pChipCap->fw_len(63360) 
 +FW Version:_e2_mp 
 +FW Build Date:20150424112224 
 +CmdAddressLenReq:(ret = 0) 
 +CmdFwStartReq: override = 1, address = 1048576 
 +CmdStartDLRsp: WiFI FW Download Success 
 +MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) 
 +efuse_probe: efuse = 10000012 
 +RtmpChipOpsEepromHook::e2p_type=0, inf_Type=4 
 +RtmpEepromGetDefault::e2p_dafault=2 
 +RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2 
 +NVM is FLASH mode 
 +1. Phy Mode = 14 
 +Country Region from e2p = ffff 
 +tssi_1_target_pwr_g_band = 38 
 +2. Phy Mode = 14 
 +3. Phy Mode = 14 
 +NICInitPwrPinCfg(11): Not support for HIF_MT yet! 
 +NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet! 
 +mt_mac_init()--> 
 +MtAsicInitMac()--> 
 +mt7628_init_mac_cr()--> 
 +MtAsicSetMacMaxLen(1241): Set the Max RxPktLen=1024! 
 +<--mt_mac_init() 
 +        WTBL Segment 1 info: 
 +                MemBaseAddr/FID:0x28000/
 +                EntrySize/Cnt:32/128 
 +        WTBL Segment 2 info: 
 +                MemBaseAddr/FID:0x40000/
 +                EntrySize/Cnt:64/128 
 +        WTBL Segment 3 info: 
 +                MemBaseAddr/FID:0x42000/64 
 +                EntrySize/Cnt:64/128 
 +        WTBL Segment 4 info: 
 +                MemBaseAddr/FID:0x44000/128 
 +                EntrySize/Cnt:32/128 
 +AntCfgInit(2876): Not support for HIF_MT yet! 
 +MCS Set = ff ff 00 00 01 
 +MtAsicSetChBusyStat(826): Not support for HIF_MT yet! 
 +CmdSlotTimeSet:(ret = 0) 
 +Channel 1 : Dirty = 840, False CCA = 0, Busy Time = 10199, Skip Channel = FALSE 
 +Channel 2 : Dirty = 544, False CCA = 0, Busy Time = 2257, Skip Channel = FALSE 
 +Channel 3 : Dirty = 528, False CCA = 0, Busy Time = 2932, Skip Channel = FALSE 
 +Channel 4 : Dirty = 512, False CCA = 0, Busy Time = 2866, Skip Channel = FALSE 
 +Channel 5 : Dirty = 496, False CCA = 0, Busy Time = 5252, Skip Channel = FALSE 
 +Channel 6 : Dirty = 560, False CCA = 0, Busy Time = 12417, Skip Channel = FALSE 
 +Channel 7 : Dirty = 436, False CCA = 0, Busy Time = 18318, Skip Channel = FALSE 
 +Channel 8 : Dirty = 440, False CCA = 0, Busy Time = 7592, Skip Channel = FALSE 
 +Channel 9 : Dirty = 444, False CCA = 0, Busy Time = 6946, Skip Channel = FALSE 
 +Channel 10 : Dirty = 448, False CCA = 0, Busy Time = 23044, Skip Channel = FALSE 
 +Channel 11 : Dirty = 630, False CCA = 0, Busy Time = 28741, Skip Channel = FALSE 
 +Channel 12 : Dirty = 288, False CCA = 0, Busy Time = 32006, Skip Channel = FALSE 
 +Channel 13 : Dirty = 252, False CCA = 0, Busy Time = 33924, Skip Channel = FALSE 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +SYNC - BBP R4 to 20MHz.l 
 +[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 
 +MtAsicSetRalinkBurstMode(2929): Not support for HIF_MT yet! 
 +MtAsicSetPiggyBack(763): Not support for HIF_MT yet! 
 +MtAsicSetTxPreamble(2908): Not support for HIF_MT yet! 
 +MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 
 +Main bssid = 18:31:bf:65:ba:6c 
 +<==== rt28xx_init, Status=0 
 +mt7628_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7e87d10 
 +WiFi Startup Cost (ra0): 6.040s 
 +hotplug net INTERFACE=apcli0 ACTION=add 
 +[doSystem] iwpriv ra0 set TxPower=100 
 +_ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.1 netmask=255.255.255.0 
 +_ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0 
 +route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0 
 +update_lan_state(lan_, 2, 0) 
 +nat_rule: stop_nat_rules 1. 
 +stop_nat_rules: apply the redirect_rules! 
 +start_lan 2160 
 +start_wsc_pin_enrollee: start wsc (0) 
 +[doSystem] iwpriv ra0 set WscConfMode=7 
 +WPS: PIN 
 +[doSystem] iwpriv ra0 set WscMode=1 
 +[1 init:start_dnsmasq +22] begin 
 +[1 init:stop_dnsmasq +22] begin 
 +# wanduck: Got LAN(-1) information: 
 + 
 +# Enable direct rule 
 +[1 init:stop_dnsmasq +22] end 
 +[1 init:start_dnsmasq +22] end 
 +start_lan_port(0) 1 
 +decomp: fname=/var/lib/misc/rstats-speed.gz 
 +decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0 
 +[doSystem] iwpriv ra0 set WatchdogPid=179 
 +load: speed_count = 0 
 +load: read source= save_path= 
 +load_history: fname=/var/lib/misc/rstats-history.gz 
 +decomp: fname=/var/lib/misc/rstats-history.gz 
 +set watchdog pid as: 179 
 +decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0 
 +decomp: fname=/var/lib/misc/rstats-history.gz 
 +decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0 
 +load_history: load failed 
 +TZ watchdog 
 +start_wan: start_wan_if(0)! 
 +[1 init:start_wan_if +23] unit=0. 
 +update_wan_state(wan0_, 0, 0) 
 +convert_wan_nvram(wan0_) 
 +** wan_ifname: vlan2 is NOT UP 
 +_ifconfig: name=vlan2 flags=1043 IFUP addr=(null) netmask=(null) 
 +update_wan_state(wan0_, 1, 0) 
 +start_wan_if(0x0744): ifup:vlan2 
 +_ifconfig: name=vlan2 flags=1043 IFUP addr=(null) netmask=(null) 
 +start_wan_if(0x0748): start auth:0 
 +start_auth:: done 
 +start_wan_if(0x0752): start udhcpc:vlan2,
 +[1 init:start_udhcpc +24] unit=0. 
 +start_wan_if(): End. 
 +udhcpc_wan:: deconfig 
 +_ifconfig: name=vlan2 flags=1043 IFUP addr=0.0.0.0 netmask=(null) 
 +wan_down(vlan2) 
 +wan_down(vlan2):
 +stop_auth:: done 
 +route_manip: cmd=DEL name=vlan2 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0 
 +update_wan_state(wan0_, 3, 0) 
 +update_wan_state(wan0_, 4, 3) 
 +udhcpc:: deconfig done 
 +clean_mode(1) clean_time(2) threshold(0) 
 +free_caches: Start syncing... 
 +free_caches: Start cleaning... 
 +free_caches: waiting 2 second... 
 +free_caches: Finish. 
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/05/13 13:51
  • by ambassador86