Aruba IAP-305

APBoot 2.1.4.8 (build 58435) Built: 2017-02-15 at 15:30:17 Model: AP-30x DRAM: 512 MiB Flash: Detected MX25R3235F: total 4 MiB NAND: 128 MiB PCIE0 link up dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3 00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000 Power: 802.3at POE Net: eth0 Radio: qca9990#0, ipq4029#1 Reset: cold **** Configuration Reset Requested by User **** Clearing state... Checking OS image and flags Image is signed; verifying checksum... passed Preserving image partition 0 Erasing flash sector @ 0x370000... OK Erasing flash sector @ 0x3a0000... OK Erasing UBIFS ...OK done Purging environment... preserving os_partition (0) Erasing SPI flash...Writing to SPI flash...done Erasing SPI flash...Writing to SPI flash...done FIPS: passed Hit <Enter> to stop autoboot: 0 Booting OS partition 0 Checking image @ 0x0 Copying image from 0x84000000 Image is signed; verifying checksum... passed SHA2 Signature available Signer Cert OK Policy Cert OK RSA signature verified using SHA2. Uncompressing Kernel Image ... OK [ 0.000000] [ 0.000000] Aruba Networks [ 0.000000] ArubaOS Version 6.5.4.8-6.5.4.8 (build 65873 / label #65873) [ 0.000000] Built by p4build@pr-hpn-build09 on 2018-07-20 at 10:25:43 UTC (g) [ 0.000000] [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.016845] SMP: Total of 4 processors activated (384.00 BogoMIPS). [ 0.043103] i2c-gpio driver registered [ 10.210613] 3 ofpart partitions found on MTD device 7980000.qcom,nand [ 10.281178] Creating 3 MTD partitions on "7980000.qcom,nand": [ 10.349891] 0x000000000000-0x000002000000 : "aos0" [ 10.448495] 0x000002000000-0x000004000000 : "aos1" [ 10.534493] 0x000004000000-0x000008000000 : "ubifs" [ 10.666182] m25p80 spi0.0: found mx25r3235f, expected n25q128a11 [ 10.748340] Found AT97SC3203 on i2c_1.8 [ 10.786939] Key type dns_resolver registered [ 10.832830] Registering SWP/SWPB emulation handler [ 12.312165] Starting Kernel SHA1 KAT ... [ 12.346624] Completed Kernel SHA1 KAT [ 12.393509] Starting Kernel HMAC-SHA1 KAT ... [ 12.443627] Starting Kernel DES KAT ...[ 12.489380] Completed Kernel DES K [ 12.533102] Starting Kernel AES KAT ... [ 12.576889] Completed Kernel AES KAT [ 12.576889] [ 12.640477] Starting Kernel AESGCM KAT ... [ 12.687220] Completed Kernel AESGCM KAT [ 12.736492] Completed Kernel HMAC-SHA1 KAT Thu Jan 1 00:00:00 PST 1970 Domain Name: SetMeUp.arubanetworks.com Current OEM Name : Aruba Networks Disabling ipv6 for devices by default AP-type has_ble_support: ONBOARD. IPv6 capability is supported for devices No panic info available Writing /dev/ttyMSM1 into /tmp/ble_port Enabling ble_daemon and ble_relay via nanny apfcutil: sector CACHE: Cache uninitialized apfcutil: sector RAP: Cache uninitialized apfcutil: sector FAT: Cache uninitialized apfcutil: sector SCRATCH: Cache uninitialized Backup ENV. apfcutil: sector MESH Prov: Cache uninitialized Installing glenmorangie ethernet driver [ 20.798507] edma module_init Enter non-FIPS mode Cfg len is 0 Configuration file is empty, turning on default services... extended ssid activate due to no AP config ... Starting watchdog process... touching file /tmp/ip_mode_0 eth1 admin down SIOCGIFFLAGS: No such device init usb modem ... [ 22.270816] SCSI subsystem initialized No USB Plugged in Checking country code. [ 49.890482] bond0: GMAC Link is up with phy_speed=1000 Ethernet uplink active. Becoming Mesh Portal Mesh is DISABLED on this device. extended ssid is activated on [ 50.775002] drvlog_mod: module license 'Propri. [ 50.894066] Disabling lock debugging due to kernel taint the platform ... copying bootuplog ... allow PAPI set device anul0 mtu to 2000 notify asap_mod 3g no present... Starting update SBL1 ... Prepare update SBL1 ... The expected MD5: 9179567a026184c5ec76a4ab7eb4a34f The SBL file size: 33239 The /aruba/bin/nor_sbl1_glenmorangie.mbn MD5: 9179567a026184c5ec76a4ab7eb4a34f The MD5 of /aruba/bin/nor_sbl1_glenmorangie.mbn is correct 33239+0 records in 33239+0 records out The original SBL1 MD5: 9179567a026184c5ec76a4ab7eb4a34f CMDLINE_WRITE_ENVIRONMENT arg {NEW_SBL1=1} The SBL1 in flash is same to /aruba/bin/nor_sbl1_glenmorangie.mbn Done. apdot1x authentication is not enabled Starting DHCP Getting an IP address... Jan 1 00:00:52 udhcpc[2116]: udhcpc (v0.9.9-pre) started Jan 1 00:00:52 udhcpc[2116]: send_discover: pkt num 0, secs 0 Jan 1 00:00:52 udhcpc[2116]: Sending discover... Jan 1 00:00:53 udhcpc[2116]: send_selecting: pkt num 0, secs 256 Jan 1 00:00:53 udhcpc[2116]: Sending select for 192.168.1.253... Jan 1 00:00:53 udhcpc[2116]: Lease of 192.168.1.253 obtained, lease time 86400 [ 67.023203] ip_time_handler: Got ip and packets on bond0 Started master elec9 192.168.1.253 255.255.255.0 192.168.1.254 Compressing all files in the /etc/httpd directory... Done. Starting Webserver bind: Transport endpoint is not connected bind: Transport endpoint is not connected bind: Transport endpoint is not connected bind: Transport endpoint is not connected Put ntpclient to the first of nannylist. AP rebooted caused by cold HW reset(power loss) shutting down watchdog process (nanny will restart it)... <<<<< Welcome to the Access Point >>>>> Completed SW FIPS KAT test User: [ 89.765227] Starting Kernel HMAC SHA1 FIPS KAT ... [ 89.808065] Completed Kernel HMAC SHA1 FIPS KAT [ 91.769180] Starting Kernel HMAC SHA256 FIPS KAT ... [ 91.814035] Completed Kernel HMAC SHA256 FIPS KAT [ 93.777169] Starting Kernel HMAC SHA384 FIPS KAT ... [ 93.822041] Completed Kernel HMAC SHA384 FIPS KAT [ 95.777170] Starting Kernel HMAC SHA512 FIPS KAT ... [ 95.822026] Completed Kernel HMAC SHA512 FIPS KAT [ 111.147216] (04:09:19) !!! Init ---> Master