Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revisionBoth sides next revision
inbox:altai:altai_c1n [2019/08/03 10:32] – [OpenWrt support] link to forum added tmomasinbox:toh:altai:altai_c1n [2019/11/03 16:07] – [OEM bootlog] yeawellwhatever
Line 4: Line 4:
 /* This template is intended to be used via https://wiki.openwrt.org/meta/create_new_device_page . */ /* This template is intended to be used via https://wiki.openwrt.org/meta/create_new_device_page . */
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} |+{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} 
 + 
 +{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
 //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.// //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//
Line 40: Line 42:
  
 ===== Hardware highlights ===== ===== Hardware highlights =====
-^ CPU                        ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB      ^ Serial   ^ JTag   ^ +^ CPU      ^ Ram      ^ Flash   ^ Network     ^ WLAN   ^ USB   ^ Serial   ^ JTag   ^ 
-EXAMPLE RT3052 @ 384 MHz   |  64 MiB  |  8 MiB  |  4x 10/100  |  bgn   |  1x 2.0  |   Yes      ?    |+AR9344   |  32 MiB  |  8 MiB  |  1x 10/100  |  bgn     No      ?     |   ?    | 
 + 
 +[[https://wikidevi.com/wiki/Altai_WA1011N-G_(C1n)]]
  
  
Line 175: Line 179:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +U-Boot 1.1.4 (Oct  8 2012 - 17:01:18) 
 + 
 +U-boot DB120 
 +DRAM:   
 +sri 
 +Wasp 1.2 
 +wasp_ddr_initial_config(249): (16bit) ddr2 init 
 +wasp_ddr_initial_config(426): Wasp ddr init done 
 +Tap value selected = 0xf [0x0 - 0x1f] 
 +Setting 0xb8116290 to 0x20402d0f 
 +32 MB 
 +Top of RAM usable for U-Boot at: 82000000 
 +Reserving 204k for U-Boot at: 81fcc000 
 +Reserving 192k for malloc() at: 81f9c000 
 +Reserving 44 Bytes for Board Info at: 81f9bfd4 
 +Reserving 36 Bytes for Global Data at: 81f9bfb0 
 +Reserving 128k for boot params() at: 81f7bfb0 
 +Stack Pointer at: 81f7bf98 
 +Now running in RAM - U-Boot at: 81fcc000 
 +Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x17 
 +flash size 8MB, sector count = 128 
 +Flash:  8 MB 
 +pci_init_board: PCIe PLL not set for 40MHz refclk 
 +*** Warning *** : PCIe WLAN Module not found !!! 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +Net:   ag934x_enet_initialize... 
 +No valid address in Flash. Using fixed address 
 +Fetching MAC Address from 0x81fee378 
 +wasp  reset mask:c03300  
 +WASP ----> S27 PHY  
 +: cfg1 0x80000000 cfg2 0x7114 
 +eth0: 00:03:7f:09:0b:ad 
 +s27 reg init  
 +athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :50 
 +eth0 up 
 +WASP ----> S27 PHY  
 +: cfg1 0x7 cfg2 0x7214 
 +eth1: 00:19:be:a0:ce:81 
 +s27 reg init lan  
 +ATHRS27: resetting s27 
 +ATHRS27: s27 reset done 
 +athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10 
 +athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000 
 +athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10 
 +eth1 up 
 +eth0, eth1 
 +Hit any key to stop autoboot:  0  
 +## Booting image at 9f050000 ... 
 +Image Name:   MIPS OpenWrt Linux-2.6.32.25 
 +Created:      2014-04-07  11:34:54 UTC 
 +Image Type:   MIPS Linux Kernel Image (lzma compressed) 
 +Data Size:    892269 Bytes = 871.4 kB 
 +Load Address: 80060000 
 +Entry Point:  80060000 
 +Verifying Checksum at 0x9f050040 ...OK 
 +Uncompressing Kernel Image ... OK 
 +No initrd 
 +## Transferring control to Linux (at address 80060000) ... 
 +## Giving linux memsize in bytes, 33554432 
 + 
 +Starting kernel ... 
 + 
 +Linux version 2.6.32.25 (gerrit@andes) (collect2: ld returned 1 exit status) #1 Mon Apr 7 19:34:34 HKT 2014 
 +bootconsole [early0] enabled 
 +CPU revision is: 0001974c (MIPS 74Kc) 
 +Atheros AR9344 rev 2, CPU:560.000 MHz, AHB:40.000 MHz, DDR:80.000 MHz 
 +Determined physical RAM map: 
 +memory: 02000000 @ 00000000 (usable) 
 +Initrd not found or empty - disabling initrd 
 +Zone PFN ranges: 
 +Normal   0x00000000 -> 0x00002000 
 +Movable zone start PFN for each node 
 +early_node_map[1] active PFN ranges 
 +0: 0x00000000 -> 0x00002000 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128 
 +Kernel command line: root=31:03 rootfstype=squashfs,jffs2 console=ttyS0,115200 board=DB120 root=31:03 
 +PID hash table entries: 128 (order: -3, 512 bytes) 
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) 
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +Writing ErrCtl register=00000000 
 +Readback ErrCtl register=00000000 
 +Memory: 29380k/32768k available (1970k kernel code, 3388k reserved, 494k data, 136k init, 0k highmem) 
 +SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +Hierarchical RCU implementation. 
 +NR_IRQS:80 
 +Calibrating delay loop... 279.55 BogoMIPS (lpj=559104) 
 +Mount-cache hash table entries: 512 
 +NET: Registered protocol family 16 
 +MIPS: machine is Atheros DB120 
 +PCI: no PCIe module found 
 +bio: create slab <bio-0> at 0 
 +Switching to clocksource MIPS 
 +NET: Registered protocol family 2 
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes) 
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP: Hash tables configured (established 1024 bind 1024) 
 +TCP reno registered 
 +NET: Registered protocol family 1 
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +Registering mini_fo version $Id$ 
 +JFFS2 version 2.2. (NAND) (SUMMARY)  �ᩩ 2001-2006 Red Hat, Inc. 
 +msgmni has been set to 57 
 +io scheduler noop registered 
 +io scheduler deadline registered (default) 
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +�Y�+��250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A 
 +console [ttyS0] enabled, bootconsole disabled 
 +console [ttyS0] enabled, bootconsole disabled 
 +Atheros AR71xx SPI Controller driver version 0.2.4 
 +m25p80 spi0.0: mx25l6405d (8192 Kbytes) 
 +Searching for RedBoot partition table in spi0.0 at offset 0x7e0000 
 +Searching for RedBoot partition table in spi0.0 at offset 0x7f0000 
 +No RedBoot partition table detected in spi0.0 
 +Creating 6 MTD partitions on "spi0.0": 
 +0x000000000000-0x000000040000 : "u-boot" 
 +0x000000040000-0x000000050000 : "u-boot-env" 
 +0x000000050000-0x000000170000 : "vmlinux" 
 +0x000000170000-0x0000007a0000 : "rootfs" 
 +mtd: partition "rootfs" set to be root filesystem 
 +mtd: partition "rootfs_data" created automatically, ofs=670000, len=130000  
 +0x000000670000-0x0000007a0000 : "rootfs_data" 
 +0x0000007a0000-0x0000007f0000 : "wlanconfig" 
 +0x0000007f0000-0x000000800000 : "EEPROM" 
 +ATHR_GMAC: Length per segment 1536 
 +ATHR_GMAC: fifo cfg 3 01f00140 
 +ATHR_GMAC: RX TASKLET - Pkts per Intr:16 
 +mac:0 Registering S27.... 
 +ATHR_GMAC: Max segments per packet :   1 
 +ATHR_GMAC: Max tx descriptor count :   128 
 +ATHR_GMAC: Max rx descriptor count :   128 
 +ATHR_GMAC: Mac capability flags    :   2380 
 +ATHR_GMAC: RX TASKLET - Pkts per Intr:16 
 +mac:1 Registering S27.... 
 +ATHR_GMAC: Max segments per packet :   1 
 +ATHR_GMAC: Max tx descriptor count :   128 
 +ATHR_GMAC: Max rx descriptor count :   128 
 +ATHR_GMAC: Mac capability flags    :   2D80 
 +Atheros AR71xx hardware watchdog driver version 0.1.0 
 +Registered led device: ethernet 
 +Registered led device: led1 
 +Registered led device: led2 
 +Registered led device: led3 
 +Registered led device: led4 
 +TCP westwood registered 
 +NET: Registered protocol family 17 
 +Bridge firewalling registered 
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> 
 +All bugs added by David S. Miller <davem@redhat.com> 
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:3. 
 +Freeing unused kernel memory: 136k freed 
 +Please be patient, while OpenWrt loads ... 
 +input: gpio-buttons as /devices/platform/gpio-buttons/input/input0 
 +Button Hotplug driver version 0.3.1 
 +athr_gmac_ring_alloc Allocated 2048 at 0x818fc800 
 +athr_gmac_ring_alloc Allocated 2048 at 0x818fd000 
 +WASP ----> S27 PHY MDIO 
 +Setting Drop CRC Errors, Pause Frames and Length Error frames  
 +Setting PHY... 
 +ATH_MAC_TIMER: enet unit:0 is up... 
 +syslog@<6> Mii 100Mbps full duplex 
 +ATH_MAC_TIMER: done cfg2 0x7115 ifctl 0x10000 miictrl   
 +- preinit - 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +- regular preinit - 
 +jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000 
 +jffs2_build_filesystem(): unlocking the mtd device... done. 
 +jffs2_build_filesystem(): erasing all blocks after the end marker... done. 
 +switching to jffs2 
 +mini_fo: using base directory: / 
 +mini_fo: using storage directory: /overlay 
 +>>>>>>>>>>>> pivot 
 +- init - 
 +athr_gmac_ring_free Freeing at 0x818fc800 
 +athr_gmac_ring_free Freeing at 0x818fd000 
 + 
 +Please press Enter to activate this console. athr_gmac_ring_alloc Allocated 2048 at 0x818fd000 
 +athr_gmac_ring_alloc Allocated 2048 at 0x818fd800 
 +WASP ----> S27 PHY MDIO 
 +Setting Drop CRC Errors, Pause Frames and Length Error frames  
 +Setting PHY... 
 +ATH_MAC_TIMER: enet unit:0 is up... 
 +syslog@<6> Mii 100Mbps full duplex 
 +ATH_MAC_TIMER: done cfg2 0x7115 ifctl 0x10000 miictrl   
 +device eth0 entered promiscuous mode 
 +br-lan: port 1(eth0) entering forwarding state 
 +APROCLOG@<6>awrt_procfs_modu[0154]: Module Init 
 +DAL@<6>dal_init[0303]: Module init 
 +awrt ctl module init!! 
 +Registerd character driver 
 +DAL@<6>dal_attach_awrt_[0264]: Attached DAL fpga hooks 
 +APROLOG@<6>awrt_proinfo_mod[1236]: Module Init 
 +Registerd character driver 
 +ARUNSTATELOG@<6>module_awrt_runs[1947]: Module Init 
 +ARUNSTATELOG@<6>awrt_runstate_in[1919]: awrt runstate init 
 +AUSERLOG@<6>module_awrt_usys[0111]: User Space Syslog Module Init 
 +ip_tables: (C) 2000-2006 Netfilter Core Team 
 +nf_conntrack version 0.5.0 (461 buckets, 1844 max) 
 +syslog@<6> ethernet up 
 +xt_time: kernel timezone is -0000 
 +Enabling Auto Neg on port:4  
 +Phy status:1000 
 +IMQ driver loaded successfully. 
 +Hooking IMQ before NAT on PREROUTING. 
 +Hooking IMQ after NAT on POSTROUTING. 
 +Ebtables v2.0 registered 
 +enet0 port4 down 
 +syslog@<6> ATH_MAC_TIMER: unit 0: phy 4 not up carrier 1 
 +br-lan: port 1(eth0) entering disabled state 
 +aaa: module license 'AAA' taints kernel. 
 +Disabling lock debugging due to kernel taint 
 +SUPERWLOG@superwifi_autoairtime: superwifi autoairtime module init. 
 +syslog@<6> ipchange 0.0.0.0 > 192.168.1.222 
 +ath_hal: 0.9.17.1 (AR9380, DEBUG, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) 
 +ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved 
 +enet0 port4 up 100Mbps Full duplex 
 +ATH_MAC_TIMER: enet unit:0 is up... 
 +syslog@<6> Mii 100Mbps full duplex 
 +ATH_MAC_TIMER: done cfg2 0x7115 ifctl 0x10000 miictrl   
 +br-lan: port 1(eth0) entering forwarding state 
 +ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved 
 +ath_ahb: 9.2.0_U11.14 (Atheros/multi-bss) 
 +ar934x_wmac_probe[338]:entry 
 +ar934x_wmac_probe[384]:0x802b8750 
 +__ath_attach: Set global_scn[0] 
 +ACBKMinfree = 48 
 +ACBEMinfree = 32 
 +ACVIMinfree = 16 
 +ACVOMinfree = 0 
 +CABMinfree = 48 
 +UAPSDMinfree = 0 
 +Bootstrap clock 40MHz 
 +ar9300Attach: This Mac Chip Rev 0x300.2 is 
 +ar9300Attach: Phy Rev 0x9999, 2G Rev 0x00, 5G Rev 0x00 
 +Wasp Enterprise mode: 0x00000000 
 +ar9300RadioAttach: Need analog access recipe!! 
 +Restoring Cal data from Flash 
 +Using Cal data from Flash 802b8750 
 +ath_txq_setup: 80e30000: sc_txq[8] qtype 3 subtype 0 
 +ath_txq_setup: 80e30000: sc_txq[0] qtype 1 subtype 0 
 +ath_txq_setup: 80e30000: sc_txq[1] qtype 1 subtype 1 
 +ath_txq_setup: 80e30000: sc_txq[2] qtype 1 subtype 2 
 +ath_txq_setup: 80e30000: sc_txq[3] qtype 1 subtype 3 
 +ath_get_caps[6424] rx chainmask mismatch actual 3 sc_chainmak 0 
 +ath_get_caps[6399] tx chainmask mismatch actual 3 sc_chainmak 0 
 +wifi0: Atheros 9340: mem=0xb8100000, irq=2 
 +ATHDAL@<6>ath_dal_init[3449]: Attach Atheros DAL 
 +ATHDAL@<6>ath_dev_idx_look[0155]: wifi0: ifindex = 21, ath_dev = 80e30000 
 +DAL@<6>dal_attach_wifi_[0141]: Attached DAL wifi_ops 
 +ATHDAL@<6>awrt_wifiinfo_in[1227]: Init countries info 
 +ATHDAL@<6>awrt_wdsinfo_ini[0111]: Init WDS info proc 
 +STT@<0>module_stt_init[5196]: STT Module Init 
 +AAIB_HISTO@<0>module_aaib_hist[0125]: AAIB Module Init 
 +DAL@<6>dal_attach_kalar[0197]: Attached DAL kalarm_hooks 
 +### Startup Initialization (takes about 0 sec) ### 
 +u32 classifier 
 +Performance counters on 
 +input device check on 
 +Actions configured 
 +AWRT_ATH_RXBUFSIZE=2340 , it is less than 3840 ,so  Force AMSDU to be Disabed 
 +wlan_vap_create : enter. devhandle=0x80e002c0, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +wlan_vap_create : exit. devhandle=0x80e002c0, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +WARNING: Fragmentation with HT mode NOT ALLOWED!! 
 +Setting Max Stations:64 
 +device ath000 entered promiscuous mode 
 +br-lan: port 2(ath000) entering forwarding state 
 +syslog@<6> radio0 up 
 +kalarm@<6>kalarm_update_al[0150]: alarm already cleared(35) 
 +syslog@<6> schedule a bg scan for radio0 
 +syslog@<6> bg scan for radio0 finish scan. 
 +events@<5>awrt_events_rece[0346]: recv msg from[PID=2927] eventID=20 size=1(reg) 
 +syslog@<6> bridge name bridge id STP enabled interfaces 
 +syslog@<6> br-lan 8000.0019bea0ce81 no eth0 
 +syslog@<6> ath000 
 +syslog@<6> Bridge table: filter 
 +syslog@<6> Bridge chain: INPUT, entries: 0, policy: ACCEPT 
 +syslog@<6> Bridge chain: FORWARD, entries: 0, policy: ACCEPT 
 +syslog@<6> Bridge chain: OUTPUT, entries: 0, policy: ACCEPT 
 +syslog@<6> Bridge table: broute 
 +syslog@<6> Bridge chain: BROUTING, entries: 0, policy: ACCEPT 
 +syslog@<6> system start 
 +syslog@<6> ethernet up 
 + 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
Line 186: Line 484:
  
 ===== Tags ===== ===== Tags =====
- 
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG}}+{{tag>unsupported WIP AR9344 8flash 32ram}}
  • Last modified: 2019/11/03 16:11
  • by yeawellwhatever