User Tools

Site Tools


inbox:linksys:linksys_ea8300

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
inbox:linksys:linksys_ea8300 [2018/07/11 22:13]
verbotenezone [Supporting activities]
inbox:linksys:linksys_ea8300 [2018/07/31 16:18] (current)
verbotenezone [Supporting activities]
Line 28: Line 28:
  
 {{:​media:​linksys:​ea8300_menuconfig_profile.png?​500|}} {{:​media:​linksys:​ea8300_menuconfig_profile.png?​500|}}
 +
 +As you can see in the OpenWrt Bootlog (end of this page), the EA8300 runs with a ipq40xx-qcom_ap-dk04.1-c1 firmware image, but there are many missing drivers. I am currently working on the DTS files and drivers. Experimental firmware will be available soon at https://​github.com/​Bunkerschild/​openwrt
 +
 +2018-07-31 Oliver Welter <​contact@verbotene.zone>​
  
 /*** if info available: uncomment and fill in /*** if info available: uncomment and fill in
Line 204: Line 208:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<​nowiki>​COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</​nowiki>​+<​nowiki>​ 
 +Format: Log Type - Time(microsec) - Message - Optional Info 
 +Log Type: B - Since Boot(Power On Reset), ​ D - Delta, ​ S - Statistic 
 +S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 
 +S - IMAGE_VARIANT_STRING=DAACANAZA 
 +S - OEM_IMAGE_VERSION_STRING=CRM 
 +S - Boot Config, 0x00000025 
 +S - Reset status Config, 0x00000010 
 +S - Core 0 Frequency, 0 MHz 
 +B -       261 - PBL, Start 
 +B -      1338 - bootable_media_detect_entry,​ Start 
 +B -      2609 - bootable_media_detect_success,​ Start 
 +B -      2623 - elf_loader_entry,​ Start 
 +B -      4030 - auth_hash_seg_entry,​ Start 
 +B -      6181 - auth_hash_seg_exit,​ Start 
 +B -     74262 - elf_segs_hash_verify_entry,​ Start 
 +B -    196333 - PBL, End 
 +B -    196357 - SBL1, Start 
 +B -    288383 - pm_device_init,​ Start 
 +D -         7 - pm_device_init,​ Delta 
 +B -    289873 - boot_flash_init,​ Start 
 +D -     87133 - boot_flash_init,​ Delta 
 +B -    381308 - boot_config_data_table_init,​ Start 
 +D -     13973 - boot_config_data_table_init,​ Delta - (419 Bytes) 
 +B -    398033 - clock_init, Start 
 +D -      7550 - clock_init, Delta 
 +B -    409019 - CDT version:​2,​Platform ID:8,Major ID:1,Minor ID:​0,​Subtype:​6 
 +B -    412432 - sbl1_ddr_set_params,​ Start 
 +B -    417527 - cpr_init, Start 
 +D -         2 - cpr_init, Delta 
 +B -    421909 - Pre_DDR_clock_init,​ Start 
 +D -         4 - Pre_DDR_clock_init,​ Delta 
 +D -     13170 - sbl1_ddr_set_params,​ Delta 
 +B -    435214 - pm_driver_init,​ Start 
 +D -         2 - pm_driver_init,​ Delta 
 +B -    505015 - sbl1_wait_for_ddr_training,​ Start 
 +D -        28 - sbl1_wait_for_ddr_training,​ Delta 
 +B -    520486 - Image Load, Start 
 +D -    144019 - QSEE Image Loaded, Delta - (269176 Bytes) 
 +B -    664931 - Image Load, Start 
 +D -      2121 - SEC Image Loaded, Delta - (2048 Bytes) 
 +B -    675076 - Image Load, Start 
 +D -    187408 - APPSBL Image Loaded, Delta - (444319 Bytes) 
 +B -    862879 - QSEE Execution, Start 
 +D -        56 - QSEE Execution, Delta 
 +B -    869115 - SBL1, End 
 +D -    674760 - SBL1, Delta 
 +S - Flash Throughput, 2085 KB/s  (715962 Bytes, ​ 343263 us) 
 +S - DDR Frequency, 672 MHz 
 + 
 + 
 +U-Boot 2012.07 [Chaos Calmer 15.05.1,​r35193] (Jan 23 2017 - 14:17:23) 
 + 
 +CBT U-Boot ver: 1.2.9 
 + 
 +smem ram ptable found: ver: 1 len: 3 
 +DRAM:  256 MiB 
 +machid : 0x8010006 
 +NAND:  ID = 9590dac2 
 +Vendor = c2 
 +Device = da 
 +ONFI device found 
 +SF NAND unsupported id:​ff:​ff:​ff:​ffSF:​ Unsupported manufacturer ff 
 +ipq_spi: SPI Flash not found (bus/​cs/​speed/​mode) = (0/​0/​48000000/​0) 
 +256 MiB 
 +MMC:   ​qca_mmc:​ 0 
 +PCI0 Link Intialized 
 +In:    serial 
 +Out:   ​serial 
 +Err:   ​serial 
 +machid: 8010006 
 +flash_type: 2 
 +Net:   MAC0 addr:​0:​3:​7f:​ba:​db:​ad 
 +PHY ID1: 0x4d 
 +PHY ID2: 0xd0b1 
 +ipq40xx_ess_sw_init done 
 +eth0 
 + 
 +Updating boot_count ... done 
 + 
 +Hit any key to stop autoboot: ​ 0 
 + 
 +Memory test start, ​ banksize=0x2000000,​ data size=0x8000,​ test count per bank=64 
 +Memory test end, lapsed time = 3 seconds 
 + 
 +The test result is success 
 + 
 + 
 +NAND read: device 0 offset 0x5f80000, size 0x300000 
 + ​3145728 bytes read: OK 
 +## Booting kernel from FIT Image at 84000000 ... 
 +   Using '​config@1'​ configuration 
 +   ​Trying '​kernel@1'​ kernel subimage 
 +     ​Description: ​ ARM Linksys Linux-3.14.77 
 +     ​Type: ​        ​Kernel Image 
 +     ​Compression: ​ uncompressed 
 +     Data Start: ​  ​0x840000e4 
 +     Data Size:    2545240 Bytes = 2.4 MiB 
 +     ​Architecture:​ ARM 
 +     ​OS: ​          ​Linux 
 +     Load Address: 0x80208000 
 +     Entry Point: ​ 0x80208000 
 +     Hash algo:    crc32 
 +     Hash value: ​  ​c68b2f21 
 +     Hash algo:    sha1 
 +     Hash value: ​  ​f62811ae861b055c3d62e863d52edb504d6a003c 
 +   ​Verifying Hash Integrity ... crc32+ sha1+ OK 
 +## Flattened Device Tree from FIT Image at 84000000 
 +   Using '​config@1'​ configuration 
 +   ​Trying '​fdt@1'​ FDT blob subimage 
 +     ​Description: ​ ARM Linksys Dallas device tree blob 
 +     ​Type: ​        Flat Device Tree 
 +     ​Compression: ​ uncompressed 
 +     Data Start: ​  ​0x8426d86c 
 +     Data Size:    38318 Bytes = 37.4 KiB 
 +     ​Architecture:​ ARM 
 +     Hash algo:    crc32 
 +     Hash value: ​  ​49f16ad6 
 +     Hash algo:    sha1 
 +     Hash value: ​  ​8cf30d490b6467bc83d0fff6fbe26973d15b23e2 
 +   ​Verifying Hash Integrity ... crc32+ sha1+ OK 
 +   ​Booting using the fdt blob at 0x8426d86c 
 +   ​Loading Kernel Image ... OK 
 +OK 
 +   ​Loading Device Tree to 871e3000, end 871ef5ad ... OK 
 +Device nand2 not found! 
 +eth0 MAC Address from ART is not valid 
 +eth1 MAC Address from ART is not valid 
 +Using machid 0x8010006 from environment 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Booting Linux on physical CPU 0x0 
 +[    0.000000] Linux version 3.14.77 (root@build-vm) (gcc version 4.8.3 (OpenWrt/​Linaro GCC 4.8-2014.04 r35193) ) #1 SMP PREEMPT Mon Nov 6 00:45:28 PST 2017 
 +[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d 
 +[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 
 +[    0.000000] Machine model: Linksys Dallas WiFi AP router based on Qualcomm AP DK07.1-c1 
 +[    0.000000] Reserved memory: failed to reserve memory for node '​rsvd1@87000000':​ base 0x87000000, size 5 MiB 
 +[    0.000000] Memory policy: Data cache writealloc 
 +[    0.000000] PERCPU: Embedded 8 pages/cpu @cfdc8000 s8448 r8192 d16128 u32768 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62208 
 +[    0.000000] Kernel command line: init=/​sbin/​init rootfstype=ubifs ubi.mtd=13,​2048 root=ubi0:​ubifs rootwait rw clk_ignore_unused 
 +[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Memory: 240764K/​250880K available (4962K kernel code, 415K rwdata, 1664K rodata, 208K init, 325K bss, 10116K reserved, 0K highmem) 
 +[    0.000000] Virtual kernel memory layout: 
 +[    0.000000] ​    ​vector ​ : 0xffff0000 - 0xffff1000 ​  ​( ​  4 kB) 
 +[    0.000000] ​    ​fixmap ​ : 0xfff00000 - 0xfffe0000 ​  ( 896 kB) 
 +[    0.000000] ​    ​vmalloc : 0xd0800000 - 0xff000000 ​  ( 744 MB) 
 +[    0.000000] ​    ​lowmem ​ : 0xc0000000 - 0xd0000000 ​  ( 256 MB) 
 +[    0.000000] ​    ​pkmap ​  : 0xbfe00000 - 0xc0000000 ​  ​( ​  2 MB) 
 +[    0.000000] ​    ​modules : 0xbf000000 - 0xbfe00000 ​  ​( ​ 14 MB) 
 +[    0.000000] ​      .text : 0xc0208000 - 0xc0880d1c ​  (6628 kB) 
 +[    0.000000] ​      .init : 0xc0881000 - 0xc08b5100 ​  ( 209 kB) 
 +[    0.000000] ​      .data : 0xc08b6000 - 0xc091df34 ​  ( 416 kB) 
 +[    0.000000] ​       .bss : 0xc091df34 - 0xc096f5dc ​  ( 326 kB) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0,​ CPUs=4, Nodes=1 
 +[    0.000000] Preemptible hierarchical RCU implementation. 
 +[    0.000000] NR_IRQS:16 nr_irqs:16 16 
 +[    0.000000] Architected cp15 timer(s) running at 48.00MHz (virt). 
 +[    0.000008] sched_clock:​ 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns 
 +[    0.000018] Switching to timer-based delay loop 
 +[    0.000340] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000) 
 +[    0.000359] pid_max: default: 32768 minimum: 301 
 +[    0.000628] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.000642] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.012216] CPU: Testing write buffer coherency: ok 
 +[    0.012566] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 
 +[    0.012634] Setting up static identity map for 0x802137b0 - 0x80213808 
 +[    0.090613] CPU1: Booted secondary processor 
 +[    0.090658] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 
 +[    0.110630] CPU2: Booted secondary processor 
 +[    0.110670] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 
 +[    0.130644] CPU3: Booted secondary processor 
 +[    0.130680] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 
 +[    0.130816] Brought up 4 CPUs 
 +[    0.130858] SMP: Total of 4 processors activated (384.00 BogoMIPS). 
 +[    0.130868] CPU: All CPU(s) started in SVC mode. 
 +[    0.141053] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 
 +[    0.141426] pinctrl core: initialized pinctrl subsystem 
 +[    0.141858] regulator-dummy:​ no parameters 
 +[    0.142521] NET: Registered protocol family 16 
 +[    0.144083] DMA: preallocated 2048 KiB pool for atomic coherent allocations 
 +[    0.144607] cpuidle: using governor ladder 
 +[    0.144619] cpuidle: using governor menu 
 +[    0.154962] hw-breakpoint:​ Debug register access (0xee003e17) caused undefined instruction on CPU 1 
 +[    0.154970] hw-breakpoint:​ Debug register access (0xee003e17) caused undefined instruction on CPU 2 
 +[    0.154978] hw-breakpoint:​ Debug register access (0xee003e17) caused undefined instruction on CPU 3 
 +[    0.154982] hw-breakpoint:​ CPU 2 failed to disable vector catch 
 +[    0.155014] hw-breakpoint:​ Debug register access (0xee003e17) caused undefined instruction on CPU 0 
 +[    0.155100] 
 +[    0.155100] Version Rollback Feature Disabled 
 +[    0.158514] i2c-msm-v2 78b7000.i2c:​ probing driver i2c-msm-v2 
 +[    0.159298] sps:sps is ready. 
 +[    0.165682] bio: create slab <​bio-0>​ at 0 
 +[    0.167354] SD0 VccQ: 1800 <--> 3000 mV 
 +[    0.167849] SCSI subsystem initialized 
 +[    0.168539] msm_bus_fabric_init_driver 
 +[    0.168698] msm_bus_device 580000.ad-hoc-bus:​ Util-fact is missing, default to 100 
 +[    0.168715] msm_bus_device 580000.ad-hoc-bus:​ Vrail-comp is missing, default to 100 
 +[    0.168734] msm_bus_device 580000.ad-hoc-bus:​ Failed to get bus clk for bus4096 ctx1 
 +[    0.168776] msm_bus_device 580000.ad-hoc-bus:​ Util-fact is missing, default to 100 
 +[    0.168791] msm_bus_device 580000.ad-hoc-bus:​ Vrail-comp is missing, default to 100 
 +[    0.168808] msm_bus_device 580000.ad-hoc-bus:​ Failed to get bus clk for bus1024 ctx1 
 +[    0.194797] Bluetooth: Core ver 2.18 
 +[    0.194869] NET: Registered protocol family 31 
 +[    0.194879] Bluetooth: HCI device and connection manager initialized 
 +[    0.194896] Bluetooth: HCI socket layer initialized 
 +[    0.194911] Bluetooth: L2CAP socket layer initialized 
 +[    0.194979] Bluetooth: SCO socket layer initialized 
 +[    0.195179] 80000.qcom,​pcie supply vreg-3.3 not found, using dummy regulator 
 +[    0.195243] 80000.qcom,​pcie supply vreg-1.8 not found, using dummy regulator 
 +[    0.195302] 80000.qcom,​pcie supply vreg-0.9 not found, using dummy regulator 
 +[    0.195363] 80000.qcom,​pcie supply gdsc-vdd not found, using dummy regulator 
 +[    0.290519] msm_pcie_enable:​ msm_pcie_enable:​ PCIe: trigger the reset of endpoint of RC0. 
 +[    0.300473] msm_pcie_enable:​ msm_pcie_enable:​ PCIe RC0 PHY is ready! 
 +[    0.320474] msm_pcie_enable:​ msm_pcie_enable:​ PCIe: Release the reset of endpoint of RC0. 
 +[    0.460611] msm_pcie_enable:​ msm_pcie_enable:​ PCIe RC0 link initialized 
 +[    0.460870] PCI host bridge to bus 0000:00 
 +[    0.460894] pci_bus 0000:00: root bus resource [io  0x40200000-0x402fffff] 
 +[    0.460910] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff] 
 +[    0.460925] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +[    0.461006] msm_pcie_oper_conf:​ msm_pcie_oper_conf:​ Read of RC0 0:0x00 + 0x0014[4] is all FFs 
 +[    0.461426] PCI: bus0: Fast back to back transfers disabled 
 +[    0.461444] pci 0000:​00:​00.0:​ bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    0.461714] msm_pcie_oper_conf:​ msm_pcie_oper_conf:​ Read of RC0 1:0x00 + 0x0014[4] is all FFs 
 +[    0.462269] PCI: bus1: Fast back to back transfers disabled 
 +[    0.462363] msm_pcie_oper_conf:​ msm_pcie_oper_conf:​ Read of RC0 0:0x00 + 0x0028[4] is all FFs 
 +[    0.462398] pci 0000:​00:​00.0:​ BAR 8: assigned [mem 0x40400000-0x405fffff] 
 +[    0.462417] pci 0000:​00:​00.0:​ BAR 0: assigned [mem 0x40300000-0x40300fff 64bit] 
 +[    0.462448] pci 0000:​01:​00.0:​ BAR 0: assigned [mem 0x40400000-0x405fffff 64bit] 
 +[    0.462488] pci 0000:​00:​00.0:​ PCI bridge to [bus 01] 
 +[    0.462509] pci 0000:​00:​00.0: ​  ​bridge window [mem 0x40400000-0x405fffff] 
 +[    0.462532] msm_pcie_probe:​ msm_pcie_probe:​ RC0 is enabled in bootup 
 +[    0.462824] Switched to clocksource arch_sys_counter 
 +[    0.464641] NET: Registered protocol family 2 
 +[    0.465885] TCP established hash table entries: 2048 (order: 1, 8192 bytes) 
 +[    0.465933] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) 
 +[    0.465983] TCP: Hash tables configured (established 2048 bind 2048) 
 +[    0.466041] TCP: reno registered 
 +[    0.466058] UDP hash table entries: 256 (order: 1, 8192 bytes) 
 +[    0.466088] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) 
 +[    0.466431] NET: Registered protocol family 1 
 +[    0.467224] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available 
 +[    0.468642] futex hash table entries: 1024 (order: 4, 65536 bytes) 
 +[    0.478162] squashfs: version 4.0 (2009/​01/​31) Phillip Lougher 
 +[    0.478177] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.479142] msgmni has been set to 470 
 +[    0.480801] Key type asymmetric registered 
 +[    0.480817] Asymmetric key parser '​x509'​ registered 
 +[    0.480853] io scheduler noop registered 
 +[    0.480863] io scheduler deadline registered (default) 
 +[    0.481782] tcsr 194b000.tcsr:​ setting usb hs phy mode select = e700e7 
 +[    0.481851] tcsr 1953000.ess_tcsr:​ setting ess interface select = 0 
 +[    0.481922] tcsr 1949000.tcsr:​ setting wifi_glb_cfg = 41000000 
 +[    0.481979] tcsr 1957000.tcsr:​ setting wifi_noc_memtype_m0_m2 = 2222222 
 +[    0.482415] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +[    0.483522] msm_serial_hsl_probe:​ detected port #0 (ttyMSM0) 
 +[    0.483563] msm_serial_hsl_probe:​ Bus scaling is disabled 
 +[    0.483714] 78af000.serial:​ ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM 
 +[    0.483788] msm_hsl_console_setup:​ console setup on port #0 
 +[    1.288005] console [ttyMSM0] enabled 
 +[    1.292089] msm_serial_hsl_init:​ driver initialized 
 +[    1.297069] uart_tx_gpio is not available 
 +[    1.300494] uart_rx_gpio is not available 
 +[    1.304528] uart_cts_gpio is not available 
 +[    1.308565] uart_rfr_gpio is not available 
 +[    1.312648] Wakeup irq not specified. 
 +[    1.316316] BLSP UART: Bus scaling is disabled. 
 +[    1.320998] sps: BAM device 0x07884000 is not registered yet. 
 +[    1.326562] sps:BAM 0x07884000 is registered. 
 +[    1.331015] 78b0000.uart:​ ttyQHS0 at MMIO 0x78b0000 (irq = 140, base_baud = 460800) is a MSM HS UART 
 +[    1.340358] qca_serial_hs module loaded 
 +[    1.345948] sps: BAM device 0x07984000 is not registered yet. 
 +[    1.350669] sps:BAM 0x07984000 is registered. 
 +[    1.354871] msm_nand_bam_init:​ msm_nand_bam_init:​ BAM device registered: bam_handle 0xcf0b4e00 
 +[    1.363746] sps:BAM 0x07984000 (va:​0xd0a60000) enabled: ver:0x19, number of pipes:7 
 +[    1.371450] msm_nand_version_check:​ nand_major:​1,​ nand_minor:​4,​ qpic_major:​1,​ qpic_minor:​4 
 +[    1.379532] msm_nand_scan:​ missing page size info - extract from NAND ID 
 +[    1.386183] msm_nand_scan:​ NAND Id: 0x9590dac2 Buswidth: 8Bits Density: 256 MByte 
 +[    1.393646] msm_nand_scan:​ pagesize: 2048 Erasesize: 131072 oobsize: 64 (in Bytes) 
 +[    1.401180] msm_nand_scan:​ BCH ECC: 4 Bit 
 +[    1.405198] msm_nand_scan:​ CFG0: 0x2a0408c0, ​     CFG1: 0x0804745c 
 +[    1.405198] ​            ​RAWCFG0:​ 0x280420c0, ​  ​RAWCFG1:​ 0x0005045d 
 +[    1.405198] ​          ​ECCBUFCFG:​ 0x00000203, ECCBCHCFG: 0x42040700 
 +[    1.405198] ​     BAD BLOCK BYTE: 0x000001d1 
 +[    1.427927] 16 ofpart partitions found on MTD device 7980000.qcom,​nand 
 +[    1.434358] Creating 16 MTD partitions on "​7980000.qcom,​nand":​ 
 +[    1.440170] 0x000000000000-0x000000100000 : "​0:​SBL1"​ 
 +[    1.446988] 0x000000100000-0x000000200000 : "​0:​MIBIB"​ 
 +[    1.452767] 0x000000200000-0x000000300000 : "​0:​QSEE"​ 
 +[    1.458501] 0x000000300000-0x000000380000 : "​0:​CDT"​ 
 +[    1.463790] 0x000000380000-0x000000400000 : "​0:​APPSBLENV"​ 
 +[    1.469587] 0x000000400000-0x000000480000 : "​0:​ART"​ 
 +[    1.474916] 0x000000480000-0x000000680000 : "​0:​APPSBL"​ 
 +[    1.481401] 0x000000680000-0x000000700000 : "​u_env"​ 
 +[    1.486637] 0x000000700000-0x000000740000 : "​s_env"​ 
 +[    1.491668] 0x000000740000-0x000000780000 : "​devinfo"​ 
 +[    1.496942] 0x000000780000-0x000005f80000 : "​kernel"​ 
 +[    1.562686] 0x000000a80000-0x000005f80000 : "​rootfs"​ 
 +[    1.626376] mtd: device 11 (rootfs) set to be root filesystem 
 +[    1.631092] 0x000005f80000-0x00000b780000 : "​alt_kernel"​ 
 +[    1.698280] 0x000006280000-0x00000b780000 : "​alt_rootfs"​ 
 +[    1.762369] 0x00000b780000-0x00000b880000 : "​sysdiag"​ 
 +[    1.768244] 0x00000b880000-0x00000ff00000 : "​syscfg"​ 
 +[    1.821806] msm_nand_probe:​ NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 133 
 +[    1.829151] msm_nand_probe:​ Allocated DMA buffer at virt_addr 0xd0a7b000, phys_addr 0x8f0ba000 
 +[    1.839739] sps:BAM 0x07884000 (va:​0xd0b40000) enabled: ver:0x19, number of pipes:12 
 +[    1.846758] m25p80 spi0.0: Failed to find sector-size 
 +[    1.863725] libphy: ipq40xx_mdio:​ probed 
 +[    1.870098] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered 
 +[    1.875772] tun: Universal TUN/TAP device driver, 1.6 
 +[    1.880712] tun: (C) 1999-2004 Max Krasnyansky <​maxk@qualcomm.com>​ 
 +[    1.887028] PPP generic driver version 2.4.2 
 +[    1.891297] PPP BSD Compression module registered 
 +[    1.895838] PPP Deflate Compression module registered 
 +[    1.900854] NET: Registered protocol family 24 
 +[    1.905296] i2c /dev entries driver 
 +[    1.910332] Bluetooth: HCI UART driver ver 2.2 
 +[    1.913769] Bluetooth: HCI H4 protocol initialized 
 +[    1.918514] Bluetooth: HCI BCSP protocol initialized 
 +[    1.925468] hidraw: raw HID events driver (C) Jiri Kosina 
 +[    1.930896] u32 classifier 
 +[    1.932567] ​    input device check on 
 +[    1.936256] Netfilter messages via NETLINK v0.30. 
 +[    1.940917] nfnl_acct: registering with nfnetlink. 
 +[    1.945761] nf_conntrack version 0.5.0 (3761 buckets, 15044 max) 
 +[    1.952248] ctnetlink v0.93: registering with nfnetlink. 
 +[    1.957010] nf_conntrack_rtsp v0.7 loading 
 +[    1.961116] ip_set: protocol 6 
 +[    1.964280] gre: GRE over IPv4 demultiplexor driver 
 +[    1.968941] ip_gre: GRE over IPv4 tunneling driver 
 +[    1.975287] nf_nat_rtsp v0.7 loading 
 +[    1.977866] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[    1.983408] TCP: cubic registered 
 +[    1.987170] NET: Registered protocol family 10 
 +[    1.992517] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[    1.997270] sit: IPv6 over IPv4 tunneling driver 
 +[    2.003447] NET: Registered protocol family 17 
 +[    2.006988] Bridge firewalling registered 
 +[    2.010858] Ebtables v2.0 registered 
 +[    2.014688] Bluetooth: RFCOMM TTY layer initialized 
 +[    2.019291] Bluetooth: RFCOMM socket layer initialized 
 +[    2.024449] Bluetooth: RFCOMM ver 1.11 
 +[    2.028135] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
 +[    2.033440] Bluetooth: BNEP filters: protocol multicast 
 +[    2.038641] Bluetooth: BNEP socket layer initialized 
 +[    2.043633] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 
 +[    2.049491] Bluetooth: HIDP socket layer initialized 
 +[    2.054498] l2tp_core: L2TP core driver, V2.0 
 +[    2.058783] l2tp_ppp: PPPoL2TP kernel driver, V2.0 
 +[    2.063560] l2tp_netlink:​ L2TP netlink interface 
 +[    2.068170] 8021q: 802.1Q VLAN Support v1.8 
 +[    2.072476] Registering SWP/SWPB emulation handler 
 +[    2.078444] SD0 VccQ: disabling 
 +[    2.080553] regulator-dummy:​ disabling 
 +[    2.084699] UBI: attaching mtd13 to ubi0 
 +[    2.441084] UBI: scanning is finished 
 +[    2.450701] UBI: attached mtd13 (name "​alt_rootfs",​ size 85 MiB) to ubi0 
 +[    2.456404] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    2.463155] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    2.469821] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    2.476696] UBI: good PEBs: 680, bad PEBs: 0, corrupted PEBs: 0 
 +[    2.482582] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 
 +[    2.489717] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2086578551 
 +[    2.498745] UBI: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 40 
 +[    2.507881] UBI: background thread "​ubi_bgt0d"​ started, PID 73 
 +[    2.508698] input: gpio_keys.7 as /​devices/​soc.0/​gpio_keys.7/​input/​input0 
 +[    2.508946] drivers/​rtc/​hctosys.c:​ unable to open rtc device (rtc0) 
 +[    2.512477] clk: Not disabling unused clocks 
 +[    2.532370] UBIFS: background thread "​ubifs_bgt0_0"​ started, PID 75 
 +[    2.578568] UBIFS: mounted UBI device 0, volume 0, name "​ubifs"​ 
 +[    2.583498] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[    2.592575] UBIFS: FS size: 79360000 bytes (75 MiB, 625 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) 
 +[    2.602223] UBIFS: reserved for root: 0 bytes (0 KiB) 
 +[    2.607262] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2EAC459E-9655-4413-B027-D3005B5F5761,​ small LPT model 
 +[    2.619597] VFS: Mounted root (ubifs filesystem) on device 0:11. 
 +[    2.624905] Freeing unused kernel memory: 208K (c0881000 - c08b5000) 
 +********************************************************************************* 
 +              _        _  __    _    __ _____ __   __ _____ 
 +             | |      | ||  \  | |  / // ____]\ \ / // ____]TM 
 +             | |      | ||   \ | | / /| (___   \ V /| (____ 
 +             | |      | || |\ \| |\ \  \____ \  \ /  \____ \ 
 +             | |_____ | || | \   | \ \  ____) | | |   ____) | 
 +             ​|_______||_||_| ​ \__|  \_\[____ /  |_|  [_____/ 
 + 
 + (c) 2013 Belkin International,​ Inc. and/or its affiliates. All rights reserved. 
 + ​Booting dallas (firmware version 1.1.3.184925) 
 +********************************************************************************* 
 +[utopia][init] System Initialization 
 +[utopia][init] Creating /proc 
 +[utopia][init] Creating /sys 
 +[utopia][init] Creating /dev 
 +[utopia][init] Creating /tmp 
 +[utopia][init] Allocating 60M for /tmp 
 +[utopia][init] Prepairing /dev/pts 
 +[utopia][init] Setting /tmp and /var permissions 
 +[utopia][init] Starting udev.. 
 +[    3.002265] UBIFS: background thread "​ubifs_bgt0_0"​ stops 
 +Attempting mount of ubifs syscfg partition 
 +UBI device number 1, total 564 LEBs (71614464 bytes, 68.3 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) 
 +[utopia][init] Using persistent syscfg data from /​var/​config/​syscfg 
 +[utopia][init] Starting system logging 
 +[utopia][init] Starting sysevent subsystem 
 +[utopia][init] Enabling DesignWare USB3 DRD Core drivers 
 +[utopia][init] Loading QCA Ethernet, NSS and GMAC drivers 
 +net.netfilter.nf_conntrack_acct = 1 
 +[utopia][init] Late loading usb drivers 
 +[utopia][init] Setting any unset system values to default 
 +[utopia][init] no persistence config file (/​var/​config/​pstcfg) found 
 +setting up MAC addresses for all interface based on 24:​F5:​A2:​06:​5B:​80 
 +NTP Servers do not need to be updated 
 +checking for interactive script start up... 
 +Updating BootCount Page[40]:​14000 ... Done 
 + 
 +attempting to sync sysinfo.cgi auth credentials 
 +[utopia][init] Loading Buttons drivers 
 +[utopia][init] Load WiFi cal data from MTD(mtd5) to FS. 
 +[utopia][init] Setup link to WiFi firmware and board data (EU) 
 +[utopia][init] Using EU region for WiFi firmware and board data 
 +NSS Auto scaling disabled 
 +inserting fpbypass.ko for QCA 
 +Sat Jul 28 20:50:00 UTC 2018 
 + 
 +dallas login: wan, sysevent received: wan-start=NULL 
 +Guest access control is up 
 +Usage: link_aggregation [ link_aggregation-start | link_aggregation-stop | link_aggregation-restart ] 
 + 
 + SSDK Init OK! 
 +operate done. 
 + 
 +wifi, sysevent received: lan-started (Sat Jul 28 21:50:05 CET 2018) 
 +Lighttpd Model Base: EA8300 
 +Generating Rainier lighttpd config 
 +Build temporary www configuration directory:​ 
 +wifi, service_start() 
 +$1$1bxubP3Z$zhSRiG0zO74sDlifh1FgQ/​ 
 +Registering Service myrouter._http._tcp.local port 80 
 +Power cycle Ethernet ports. 
 +Got a reply for myrouter._http._tcp.local.:​ Name now registered and active 
 +[utopia][init] Loading GMAC and WLAN drivers 
 +[utopia][init] Creating wifi devices 
 +ath0 
 +ath1 
 +ath10 
 +wifi, wifi_physical_start(ath0) 
 +wifi, setting obss rssi threshold (ath0) 
 +Invalid command : obss_rx_rssi_th 
 +Auto channel 
 +Invalid command : acs_2g_allchan 
 +wifi, wifi_virtual_start(ath0) 
 +wifi, wifi_user_start(ath0) 
 +Not ready for JNAP. Sleeping for 15 seconds... 
 +wifi_user, ath0 TxBF enabled 
 +wifi, primary AP: ath0 is up 
 +wifi, wifi_guest_start(ath0) 
 +ath2 
 +wifi_user, ath2 TxBF enabled 
 +wifi, guest AP: ath2 is up 
 +wifi, wifi_physical_start(ath1) 
 +[utopia] Not setting ppp_clamp_mtu 
 +wifi, setting obss rssi threshold (ath1) 
 +Invalid command : obss_rx_rssi_th 
 +Auto channel 
 +Following channels are blocked from Channel selection algorithm 
 +[52] [56] [60] [64] 
 +wifi, wifi_virtual_start(ath1) 
 +wifi, wifi_user_start(ath1) 
 +wifi_user, ath1 TxBF enabled 
 +wifi_user, ath1 MU-MIMO enabled 
 +wifi, primary AP: ath1 is up 
 + 
 + SSDK Init OK! 
 +operate done. 
 + 
 +wifi, wifi_guest_start(ath1) 
 +RTNETLINK answers: Device or resource busy 
 +ath3 
 +wifi_user, ath3 TxBF enabled 
 +wifi_user, ath3 MU-MIMO enabled 
 +wifi, guest AP: ath3 is up 
 +wifi, wifi_physical_start(ath10) 
 +wifi, setting obss rssi threshold (ath10) 
 +Invalid command : obss_rx_rssi_th 
 +Auto channel 
 +wifi, wifi_virtual_start(ath10) 
 +wifi, wifi_user_start(ath10) 
 +wifi_user, ath10 TxBF enabled 
 +wifi_user, ath10 MU-MIMO enabled 
 +wifi, primary AP: ath10 is up 
 +wifi, wifi_guest_start(ath10) 
 +wifi, guest ath6 is disabled, do not start wifi guest 
 +wifi, start_hostapd() 
 +Configuration file: /​tmp/​hostapd-ath0.conf 
 +Configuration file: /​tmp/​hostapd-ath1.conf 
 +Configuration file: /​tmp/​hostapd-ath10.conf 
 +ath0: Could not connect to kernel driver 
 +Using interface ath0 with hwaddr 24:​f5:​a2:​06:​5b:​81 and ssid "​Linksys13295"​ 
 +random: Cannot read from /​dev/​random:​ Resource temporarily unavailable 
 +random: Only 0/20 bytes of strong random data available from /​dev/​random 
 +random: Not enough entropy pool available for secure operations 
 +WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects 
 +ath0: interface state UNINITIALIZED->​ENABLED 
 +ath0: AP-ENABLED 
 +ath1: Could not connect to kernel driver 
 +Using interface ath1 with hwaddr 24:​f5:​a2:​06:​5b:​82 and ssid "​Linksys13295"​ 
 +random: Cannot read from /​dev/​random:​ Resource temporarily unavailable 
 +random: Only 0/20 bytes of strong random data available from /​dev/​random 
 +random: Not enough entropy pool available for secure operations 
 +WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects 
 +ath1: interface state UNINITIALIZED->​ENABLED 
 +ath1: AP-ENABLED 
 +ath10: Could not connect to kernel driver 
 +Using interface ath10 with hwaddr 24:​f5:​a2:​06:​5b:​83 and ssid "​Linksys13295"​ 
 +===>​RESET dallas usb power 
 +random: Cannot read from /​dev/​random:​ Resource temporarily unavailable 
 +random: Only 0/20 bytes of strong random data available from /​dev/​random 
 +random: Not enough entropy pool available for secure operations 
 +WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects 
 +ath10: interface state UNINITIALIZED->​ENABLED 
 +ath10: AP-ENABLED 
 +Restarting nfqrecv service... 
 +fastpath, sysevent received: qos_enabled 
 +wifi, start_lbd() 
 +starting daemon 
 +[utopia] Not setting ppp_clamp_mtu on dslite protocol 
 +wan, sysevent received: phylink_wan_state=down 
 +[fw.sh] fwup_checked_after_boot:​ 0 
 +[fwupd] status details:"​ERROR:​ Connecting server"​ 
 +[fw.sh] fwup_forced_update:​ 0 
 +Starting smbd ... 
 +[fw.sh] fwup_checked_after_boot:​ 0 
 +[fwupd] status details:"​ERROR:​ Connecting server"​ 
 +[fw.sh] fwup_forced_update:​ 0 
 +</​nowiki>​
 </​WRAP>​\\ </​WRAP>​\\
  
-==== OpenWrt bootlog ====+==== OpenWrt bootlog ​(TFTP Image with test kernel) ​====
 <WRAP bootlog> <WRAP bootlog>
-<​nowiki>​COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</​nowiki>​+<​nowiki>​ 
 +Format: Log Type - Time(microsec) - Message - Optional Info 
 +Log Type: B - Since Boot(Power On Reset), ​ D - Delta, ​ S - Statistic 
 +S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 
 +S - IMAGE_VARIANT_STRING=DAACANAZA 
 +S - OEM_IMAGE_VERSION_STRING=CRM 
 +S - Boot Config, 0x00000025 
 +S - Reset status Config, 0x00000010 
 +S - Core 0 Frequency, 0 MHz 
 +B -       261 - PBL, Start 
 +B -      1339 - bootable_media_detect_entry,​ Start 
 +B -      2609 - bootable_media_detect_success,​ Start 
 +B -      2623 - elf_loader_entry,​ Start 
 +B -      4030 - auth_hash_seg_entry,​ Start 
 +B -      6181 - auth_hash_seg_exit,​ Start 
 +B -     74261 - elf_segs_hash_verify_entry,​ Start 
 +B -    196330 - PBL, End 
 +B -    196354 - SBL1, Start 
 +B -    288379 - pm_device_init,​ Start 
 +D -         7 - pm_device_init,​ Delta 
 +B -    289869 - boot_flash_init,​ Start 
 +D -     87156 - boot_flash_init,​ Delta 
 +B -    381328 - boot_config_data_table_init,​ Start 
 +D -     13978 - boot_config_data_table_init,​ Delta - (419 Bytes) 
 +B -    398058 - clock_init, Start 
 +D -      7586 - clock_init, Delta 
 +B -    409079 - CDT version:​2,​Platform ID:8,Major ID:1,Minor ID:​0,​Subtype:​6 
 +B -    412492 - sbl1_ddr_set_params,​ Start 
 +B -    417586 - cpr_init, Start 
 +D -         2 - cpr_init, Delta 
 +B -    421969 - Pre_DDR_clock_init,​ Start 
 +D -         4 - Pre_DDR_clock_init,​ Delta 
 +D -     13171 - sbl1_ddr_set_params,​ Delta 
 +B -    435273 - pm_driver_init,​ Start 
 +D -         2 - pm_driver_init,​ Delta 
 +B -    505082 - sbl1_wait_for_ddr_training,​ Start 
 +D -        28 - sbl1_wait_for_ddr_training,​ Delta 
 +B -    520564 - Image Load, Start 
 +D -    144019 - QSEE Image Loaded, Delta - (269176 Bytes) 
 +B -    665009 - Image Load, Start 
 +D -      2121 - SEC Image Loaded, Delta - (2048 Bytes) 
 +B -    675150 - Image Load, Start 
 +D -    187397 - APPSBL Image Loaded, Delta - (444319 Bytes) 
 +B -    862942 - QSEE Execution, Start 
 +D -        56 - QSEE Execution, Delta 
 +B -    869146 - SBL1, End 
 +D -    674901 - SBL1, Delta 
 +S - Flash Throughput, 2085 KB/s  (715962 Bytes, ​ 343256 us) 
 +S - DDR Frequency, 672 MHz 
 + 
 + 
 +U-Boot 2012.07 [Chaos Calmer 15.05.1,​r35193] (Jan 23 2017 - 14:17:23) 
 + 
 +CBT U-Boot ver: 1.2.9 
 + 
 +smem ram ptable found: ver: 1 len: 3 
 +DRAM:  256 MiB 
 +machid : 0x8010006 
 +NAND:  ID = 9590dac2 
 +Vendor = c2 
 +Device = da 
 +ONFI device found 
 +SF NAND unsupported id:​ff:​ff:​ff:​ffSF:​ Unsupported manufacturer ff 
 +ipq_spi: SPI Flash not found (bus/​cs/​speed/​mode) = (0/​0/​48000000/​0) 
 +256 MiB 
 +MMC:   ​qca_mmc:​ 0 
 +PCI0 Link Intialized 
 +In:    serial 
 +Out:   ​serial 
 +Err:   ​serial 
 +machid: 8010006 
 +flash_type: 2 
 +Net:   MAC0 addr:​0:​3:​7f:​ba:​db:​ad 
 +PHY ID1: 0x4d 
 +PHY ID2: 0xd0b1 
 +ipq40xx_ess_sw_init done 
 +eth0 
 + 
 +Updating boot_count ... done 
 + 
 +Hit any key to stop autoboot: ​ 0 
 +(IPQ40xx) # setenv ipaddr 192.168.1.1 
 +(IPQ40xx) # setenv serverip 192.168.1.6 
 +(IPQ40xx) # tftp openwrt-ipq40xx-qcom_ap-dk04.1-c1-initramfs-fit-uImage.itb 
 +eth0 PHY0 Down Speed :10 Half duplex 
 +eth0 PHY1 Down Speed :10 Half duplex 
 +eth0 PHY2 Down Speed :10 Half duplex 
 +eth0 PHY3 up Speed :100 Full duplex 
 +eth0 PHY4 Down Speed :10 Half duplex 
 +Using eth0 device 
 +TFTP from server 192.168.1.6;​ our IP address is 192.168.1.1 
 +Filename '​openwrt-ipq40xx-qcom_ap-dk04.1-c1-initramfs-fit-uImage.itb'​. 
 +Load address: 0x84000000 
 +Loading: #################################################################​ 
 +         #################################################################​ 
 +         #################################################################​ 
 +         #################################################################​ 
 +         #################################################################​ 
 +         #################################################################​ 
 +         #################################################################​ 
 +         ####​ 
 +done 
 +Bytes transferred = 6736896 (66cc00 hex) 
 +(IPQ40xx) # bootm 
 +## Booting kernel from FIT Image at 84000000 ... 
 +   Using '​config@1'​ configuration 
 +   ​Trying '​kernel@1'​ kernel subimage 
 +     ​Description: ​ ARM OpenWrt Linux-4.14.59 
 +     ​Type: ​        ​Kernel Image 
 +     ​Compression: ​ gzip compressed 
 +     Data Start: ​  ​0x840000e4 
 +     Data Size:    6720210 Bytes = 6.4 MiB 
 +     ​Architecture:​ ARM 
 +     ​OS: ​          ​Linux 
 +     Load Address: 0x80208000 
 +     Entry Point: ​ 0x80208000 
 +     Hash algo:    crc32 
 +     Hash value: ​  ​7d5e1f1c 
 +     Hash algo:    sha1 
 +     Hash value: ​  ​f7c24d295cf139f0fcb742ecbf8c13cbb7c4563e 
 +   ​Verifying Hash Integrity ... crc32+ sha1+ OK 
 +## Flattened Device Tree from FIT Image at 84000000 
 +   Using '​config@1'​ configuration 
 +   ​Trying '​fdt@1'​ FDT blob subimage 
 +     ​Description: ​ ARM OpenWrt qcom_ap-dk04.1-c1 device tree blob 
 +     ​Type: ​        Flat Device Tree 
 +     ​Compression: ​ uncompressed 
 +     Data Start: ​  ​0x84668cf4 
 +     Data Size:    14809 Bytes = 14.5 KiB 
 +     ​Architecture:​ ARM 
 +     Hash algo:    crc32 
 +     Hash value: ​  ​d9fa7caf 
 +     Hash algo:    sha1 
 +     Hash value: ​  ​169360b07ecbe32963874badfa0d1ea3609266be 
 +   ​Verifying Hash Integrity ... crc32+ sha1+ OK 
 +   ​Booting using the fdt blob at 0x84668cf4 
 +   ​Uncompressing Kernel Image ... OK 
 +   ​Loading Device Tree to 871e8000, end 871ee9d8 ... OK 
 +Device nand2 not found! 
 +eth0 MAC Address from ART is not valid 
 +eth1 MAC Address from ART is not valid 
 +Using machid 0x8010006 from environment 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Booting Linux on physical CPU 0x0 
 +[    0.000000] Linux version 4.14.59 (olli@athena) (gcc version 7.3.0 (OpenWrt 8 
 +[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d 
 +[    0.000000] CPU: div instructions available: patching division code 
 +[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie 
 +[    0.000000] OF: fdt: Machine model: Qualcomm Technologies,​ Inc. IPQ40xx/​AP-D1 
 +[    0.000000] Memory policy: Data cache writealloc 
 +[    0.000000] random: get_random_bytes called from start_kernel+0x88/​0x3c0 wit0 
 +[    0.000000] percpu: Embedded 15 pages/cpu @cfdb1000 s29260 r8192 d23988 u6140 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64512 
 +[    0.000000] Kernel command line: 
 +[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Memory: 242772K/​260096K available (4180K kernel code, 137K rwdat) 
 +[    0.000000] Virtual kernel memory layout: 
 +[    0.000000] ​    ​vector ​ : 0xffff0000 - 0xffff1000 ​  ​( ​  4 kB) 
 +[    0.000000] ​    ​fixmap ​ : 0xffc00000 - 0xfff00000 ​  (3072 kB) 
 +[    0.000000] ​    ​vmalloc : 0xd0800000 - 0xff800000 ​  ( 752 MB) 
 +[    0.000000] ​    ​lowmem ​ : 0xc0000000 - 0xd0000000 ​  ( 256 MB) 
 +[    0.000000] ​    ​pkmap ​  : 0xbfe00000 - 0xc0000000 ​  ​( ​  2 MB) 
 +[    0.000000] ​    ​modules : 0xbf000000 - 0xbfe00000 ​  ​( ​ 14 MB) 
 +[    0.000000] ​      .text : 0xc0208000 - 0xc0715100 ​  (5173 kB) 
 +[    0.000000] ​      .init : 0xc0900000 - 0xc1100000 ​  (8192 kB) 
 +[    0.000000] ​      .data : 0xc1100000 - 0xc1122540 ​  ( 138 kB) 
 +[    0.000000] ​       .bss : 0xc1124000 - 0xc11612b4 ​  ( 245 kB) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0,​ CPUs=4, Nodes=1 
 +[    0.000000] Hierarchical RCU implementation. 
 +[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 
 +[    0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt). 
 +[    0.000000] clocksource:​ arch_sys_counter:​ mask: 0xffffffffffffff max_cycless 
 +[    0.000008] sched_clock:​ 56 bits at 48MHz, resolution 20ns, wraps every 4398s 
 +[    0.000022] Switching to timer-based delay loop, resolution 20ns 
 +[    0.000213] Calibrating delay loop (skipped), value calculated using timer f) 
 +[    0.000230] pid_max: default: 32768 minimum: 301 
 +[    0.000357] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.000374] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.000942] CPU: Testing write buffer coherency: ok 
 +[    0.001539] Setting up static identity map for 0x80300000 - 0x80300060 
 +[    0.001662] Hierarchical SRCU implementation. 
 +[    0.002226] smp: Bringing up secondary CPUs ... 
 +[    0.004637] smp: Brought up 1 node, 4 CPUs 
 +[    0.004654] SMP: Total of 4 processors activated (384.00 BogoMIPS). 
 +[    0.004662] CPU: All CPU(s) started in SVC mode. 
 +[    0.008040] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 
 +[    0.008188] clocksource:​ jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms 
 +[    0.008211] futex hash table entries: 1024 (order: 4, 65536 bytes) 
 +[    0.008384] pinctrl core: initialized pinctrl subsystem 
 +[    0.009210] NET: Registered protocol family 16 
 +[    0.009449] DMA: preallocated 256 KiB pool for atomic coherent allocations 
 +[    0.010509] cpuidle: using governor ladder 
 +[    0.010550] cpuidle: using governor menu 
 +[    0.022722] usbcore: registered new interface driver usbfs 
 +[    0.022792] usbcore: registered new interface driver hub 
 +[    0.022870] usbcore: registered new device driver usb 
 +[    0.022925] pps_core: LinuxPPS API ver. 1 registered 
 +[    0.022934] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom> 
 +[    0.022960] PTP clock support registered 
 +[    0.023988] clocksource:​ Switched to clocksource arch_sys_counter 
 +[    0.024752] NET: Registered protocol family 2 
 +[    0.025319] TCP established hash table entries: 2048 (order: 1, 8192 bytes) 
 +[    0.025360] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) 
 +[    0.025411] TCP: Hash tables configured (established 2048 bind 2048) 
 +[    0.025507] UDP hash table entries: 256 (order: 1, 8192 bytes) 
 +[    0.025542] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) 
 +[    0.025731] NET: Registered protocol family 1 
 +[    0.113582] No memory allocated for crashlog 
 +[    0.113733] workingset: timestamp_bits=30 max_order=16 bucket_order=0 
 +[    0.116905] squashfs: version 4.0 (2009/​01/​31) Phillip Lougher 
 +[    0.116922] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI. 
 +[    0.121777] io scheduler noop registered 
 +[    0.121795] io scheduler deadline registered (default) 
 +[    0.124445] bam-dma-engine 8e04000.dma:​ num-channels unspecified in dt 
 +[    0.124463] bam-dma-engine 8e04000.dma:​ num-ees unspecified in dt 
 +[    0.125781] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +[    0.126301] msm_serial 78af000.serial:​ msm_serial: detected port #0 
 +[    0.126346] msm_serial 78af000.serial:​ uartclk = 1843200 
 +[    0.126395] 78af000.serial:​ ttyMSM0 at MMIO 0x78af000 (irq = 26, base_baud =M 
 +[    0.126419] msm_serial: console setup on port #0 
 +[    0.609337] console [ttyMSM0] enabled 
 +[    0.614322] msm_serial 78b0000.serial:​ msm_serial: detected port #1 
 +[    0.617585] msm_serial 78b0000.serial:​ uartclk = 48000000 
 +[    0.623674] 78b0000.serial:​ ttyMSM1 at MMIO 0x78b0000 (irq = 27, base_baud =M 
 +[    0.629423] msm_serial: driver initialized 
 +[    0.641657] loop: module loaded 
 +[    0.643240] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda 
 +[    0.644855] nand: Macronix MX30LF2G18AC 
 +[    0.651407] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB si4 
 +[    0.656209] spi_qup 78b5000.spi:​ IN:​block:​16,​ fifo:64, OUT:​block:​16,​ fifo:64 
 +[    0.663307] m25p80 spi0.0: unrecognized JEDEC id bytes: ff, ff, ff 
 +[    0.670630] libphy: Fixed MDIO Bus: probed 
 +[    0.675954] i2c /dev entries driver 
 +[    0.680088] i2c_qup 78b7000.i2c:​ using default clock-frequency 100000 
 +[    0.712785] NET: Registered protocol family 10 
 +[    0.716902] Segment Routing with IPv6 
 +[    0.717002] NET: Registered protocol family 17 
 +[    0.720260] 8021q: 802.1Q VLAN Support v1.8 
 +▒[    0.745575] Freeing unused kernel memory: 8192Ker 
 +[    0.811408] init: Console is alive 
 +[    0.811591] init: - watchdog - 
 +[    0.822673] kmodloader: loading kernel modules from /​etc/​modules-boot.d/​* 
 +[    0.825558] ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver 
 +[    0.832062] SCSI subsystem initialized 
 +[    0.841171] ehci-platform:​ EHCI generic platform driver 
 +[    0.864908] ohci_hcd: USB 1.1 '​Open'​ Host Controller (OHCI) Driver 
 +[    0.867021] ohci-platform:​ OHCI generic platform driver 
 +[    1.167230] xhci-hcd xhci-hcd.0.auto:​ xHCI Host Controller 
 +[    1.167295] xhci-hcd xhci-hcd.0.auto:​ new USB bus registered, assigned bus n1 
 +[    1.171844] xhci-hcd xhci-hcd.0.auto:​ hcc params 0x0228f665 hci version 0x100 
 +[    1.179268] xhci-hcd xhci-hcd.0.auto:​ irq 29, io mem 0x08a00000 
 +[    1.188532] hub 1-0:1.0: USB hub found 
 +[    1.193790] hub 1-0:1.0: 1 port detected 
 +[    1.197924] xhci-hcd xhci-hcd.0.auto:​ xHCI Host Controller 
 +[    1.201664] xhci-hcd xhci-hcd.0.auto:​ new USB bus registered, assigned bus n2 
 +[    1.206989] xhci-hcd xhci-hcd.0.auto:​ Host supports USB 3.0  SuperSpeed 
 +[    1.214671] usb usb2: We don't know the algorithms for LPM for this host, di. 
 +[    1.221830] hub 2-0:1.0: USB hub found 
 +[    1.229514] hub 2-0:1.0: 1 port detected 
 +[    1.233516] xhci-hcd xhci-hcd.1.auto:​ xHCI Host Controller 
 +[    1.237122] xhci-hcd xhci-hcd.1.auto:​ new USB bus registered, assigned bus n3 
 +[    1.242600] xhci-hcd xhci-hcd.1.auto:​ hcc params 0x0220f665 hci version 0x100 
 +[    1.249990] xhci-hcd xhci-hcd.1.auto:​ irq 30, io mem 0x06000000 
 +[    1.259202] hub 3-0:1.0: USB hub found 
 +[    1.264552] hub 3-0:1.0: 1 port detected 
 +[    1.268601] xhci-hcd xhci-hcd.1.auto:​ xHCI Host Controller 
 +[    1.272417] xhci-hcd xhci-hcd.1.auto:​ new USB bus registered, assigned bus n4 
 +[    1.277725] xhci-hcd xhci-hcd.1.auto:​ Host supports USB 3.0  SuperSpeed 
 +[    1.285393] usb usb4: We don't know the algorithms for LPM for this host, di. 
 +[    1.292543] hub 4-0:1.0: USB hub found 
 +[    1.300253] hub 4-0:1.0: config failed, hub doesn'​t have any ports! (err -19) 
 +[    1.305453] kmodloader: done loading kernel modules from /​etc/​modules-boot.d* 
 +[    1.314289] init: - preinit - 
 +[    1.460416] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    1.494998] random: jshn: uninitialized urandom read (4 bytes read) 
 +[    1.506408] random: jshn: uninitialized urandom read (4 bytes read) 
 +/​bin/​board_detect:​ line 12: Unsupported:​ not found 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +[    4.763182] procd: - early - 
 +[    4.763311] procd: - watchdog - 
 +[    5.395127] procd: - watchdog - 
 +[    5.397838] procd: - ubus - 
 +[    5.409351] urandom_read:​ 5 callbacks suppressed 
 +[    5.409362] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[    5.459896] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[    5.471215] procd: - init - 
 +Please press Enter to activate this console. 
 +[    5.593927] kmodloader: loading kernel modules from /​etc/​modules.d/​* 
 +[    5.597918] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[    5.997919] Loading modules backported from Linux version wt-2017-11-01-0-gf0 
 +[    5.997954] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d 
 +[    6.006248] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[    6.358200] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) 
 +[    6.569404] xt_time: kernel timezone is -0000 
 +[    6.767816] PPP generic driver version 2.4.2 
 +[    6.768723] NET: Registered protocol family 24 
 +[    6.782810] kmodloader: done loading kernel modules from /​etc/​modules.d/​* 
 + 
 + 
 + 
 +BusyBox v1.28.4 () built-in shell (ash) 
 + 
 +  _______ ​                    ​________ ​       __ 
 + ​| ​      ​|.-----.-----.-----.| ​ |  |  |.----.| ​ |_ 
 + ​| ​  ​- ​  ​|| ​ _  |  -__|     ​|| ​ |  |  ||   ​_|| ​  _| 
 + ​|_______|| ​  ​__|_____|__|__||________||__| ​ |____| 
 +          |__| W I R E L E S S   F R E E D O M 
 + ​----------------------------------------------------- 
 + ​OpenWrt SNAPSHOT, r7707-af9731832b 
 + ​----------------------------------------------------- 
 +=== WARNING! ===================================== 
 +There is no root password defined on this device! 
 +Use the "​passwd"​ command to set up a new password 
 +in order to prevent unauthorized SSH logins. 
 +-------------------------------------------------- 
 +root@OpenWrt:/#​ 
 +</​nowiki>​
 </​WRAP>​\\ </​WRAP>​\\
  
inbox/linksys/linksys_ea8300.1531347215.txt.gz · Last modified: 2018/07/11 22:13 by verbotenezone