User Tools

Site Tools


inbox:docs:installation:telnet

Telnet

Installation can be done via Telnet.

Devices with this installation method

BrandModelVersionSupported Current RelInstallation method(s)Comment installationDevice PageDevice Techdata
EnGeniusENS202EXT1.0.018.06.4GUI OEM, Telnet, see git-commitengenius_ens202ext_1.0.0View/Edit data
i.onikCloud Hubexternal imageSerial, Telnetlogin root/91657853, then mtd_write of sysupgrade image to mtd5View/Edit data
MedionMD86587v118.06.4Telnet, see devicepagemd86587View/Edit data
NetgearR622018.06.4Telnet, see devicepage, see git-commitLuCI Web Interface/uhttpd (also ssh) may NOT be enabled across power cycling after installation, or hard reset. If not - can test by power cycling first, a hard reset brings it back - then ssh, enter '/etc/init.d/uhttpd enable' on the command line, then 'reboot' or '/etc/init.d/uhttpd start' before power cycling or backing up a configuration. Restoring a configuration from after this had been applied also solves the problem.netgear_r6220View/Edit data
NetgearR623018.06.4Telnet, see devicepage, see git-commitLuCI Web Interface/uhttpd (also ssh) may NOT be enabled across power cycling after installation, or hard reset. If not - can test by power cycling first, a hard reset brings it back - then ssh, enter '/etc/init.d/uhttpd enable' on the command line, then 'reboot' or '/etc/init.d/uhttpd start' before power cycling or backing up a configuration. Restoring a configuration from after this had been applied also solves the problem.netgear_r6220View/Edit data
SamsungWAM25018.06.4Telnet, see git-commitView/Edit data
 
inbox/docs/installation/telnet.txt · Last modified: 2019/02/15 18:59 by tmomas