Landing page for Installation method links from ToH.
Example for method #2 with sectionlinks.
See also installation
Shall we hide/fold the content?
This is a TFTP-like rescue procedure with a manufacturer utility to be installed on a client PC. It works for both, installation and recovery.
Installation can be done via CF card.
Provide an outline of the procedure here.
Installation can be done via CFE TFTP recovery.
1 Store a copy of the OpenWrt firmware (.BIN) on the HDD of a local PC 2 Connect an Ethernet cable between the LAN port on the router and the network port on the local PC 3 Configure the PC with a static IP address other than 192.168.0.1 (e.g. 192.168.0.5) 4 Power down the router 5 Press and hold the reset button on the router for 3 to 5 seconds and re-plug the power without releasing the reset button 6 Continue to hold the reset button until the red power light keeps blinking on and off 7 Open a web browser and enter the following address: http://192.168.0.1/ 8 Wait for the 'D-Link Router Recovery Mode' page to load 9 Click the [Choose File] button, select the OpenWrt router firmware stored on the local PC and then press [Upload] 10 After the new OpenWrt firmware has successfully loaded, a 'Success' page will display 11 If the 'Success' page fails to display, then repeat steps 4 through 9
Installation is done via the OEMs GUI. See the user manual of your device how to login and navigate to the firmware update page of your device.
Installation can be done via Mikrotik TFTP.
Installation can be done via SD card.
Provide an outline of the procedure here
Which image to chose, ext4 or squashfs, or…?
The installation method is described on the devicepage.
The installation method is described in the git-commit which added support 1) for this device.
The installation method is described in the OpenWrt forum.
Installation can be done via U-Boot TFTP recovery.
Installation can be done via U-Boot TFTP + serial recovery.
Installation can be done via U-Boot web recovery.
The installation method is unknown. No description of the installation method in the git commit, OpenWrt forum or devicepage.
If you know how to install OpenWrt on one of these devices, please update the Device Techdata accordingly.
Check the following pages for generic installation instructions: