Differences

This shows you the differences between two versions of the page.

--- docs:techref:image.makefile [2019/09/09 17:45] – wip infobox vgaetera
+++ docs:techref:image.makefile [2020/02/26 22:16] (current) – [image/Makefile] mwarning
@@ Line 86: / Line 86: @@
 Kernel options required by the platform + kernel version.
-  CONFIG_QCOM_PM=y
+<code make>
-  CONFIG_QCOM_QFPROM=y
+CONFIG_QCOM_PM=y
-  CONFIG_QCOM_RPMCC=y
+CONFIG_QCOM_QFPROM=y
+CONFIG_QCOM_RPMCC=y
+</code>
 ===== files-4.x =====
@@ Line 99: / Line 101: @@
 Platform wide device definition and common package set. Generally does not require modification when adding additional platform devices.
-  include $(TOPDIR)/rules.mk
+<code make>
+include $(TOPDIR)/rules.mk
-  ARCH:=arm
-  BOARD:=ipq806x
+ARCH:=arm
-  BOARDNAME:=Qualcomm Atheros IPQ806X
+BOARD:=ipq806x
-  FEATURES:=squashfs nand fpu ramdisk
+BOARDNAME:=Qualcomm Atheros IPQ806X
-  CPU_TYPE:=cortex-a15
+FEATURES:=squashfs nand fpu ramdisk
-  CPU_SUBTYPE:=neon-vfpv4
+CPU_TYPE:=cortex-a15
-  MAINTAINER:=John Crispin <john@phrozen.org>
+CPU_SUBTYPE:=neon-vfpv4
+MAINTAINER:=John Crispin <john@phrozen.org>
-  KERNEL_PATCHVER:=4.14
+KERNEL_PATCHVER:=4.14
-  KERNELNAME:=zImage Image dtbs
+KERNELNAME:=zImage Image dtbs
-  include $(INCLUDE_DIR)/target.mk
-  DEFAULT_PACKAGES += \
+include $(INCLUDE_DIR)/target.mk
-  	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
+DEFAULT_PACKAGES += \
-  	kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \
+	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
-  	kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
+	kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \
-  	kmod-usb3 kmod-usb-dwc3-of-simple kmod-usb-phy-qcom-dwc3 \
+	kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
-  	kmod-ath10k-ct wpad-basic \
+	kmod-usb3 kmod-usb-dwc3-of-simple kmod-usb-phy-qcom-dwc3 \
-  	uboot-envtools
+	kmod-ath10k-ct wpad-basic \
+	uboot-envtools
-  $(eval $(call BuildTarget))
+$(eval $(call BuildTarget))
+</code>
 ===== image/Makefile =====
 Device specific image creation parameters and image generation functions.
-  define Device/zyxel_nbg6817
+<code make>
-  	DEVICE_DTS := qcom-ipq8065-nbg6817
+define Device/zyxel_nbg6817
-  	KERNEL_SIZE := 4096k
+	DEVICE_DTS := qcom-ipq8065-nbg6817
-  	BLOCKSIZE := 64k
+	KERNEL_SIZE := 4096k
-  	BOARD_NAME := nbg6817
+	BLOCKSIZE := 64k
-  	RAS_BOARD := NBG6817
+	BOARD_NAME := nbg6817
-  	RAS_ROOTFS_SIZE := 20934k
+	RAS_BOARD := NBG6817
-  	RAS_VERSION := "V1.99(OWRT.9999)C0"
+	RAS_ROOTFS_SIZE := 20934k
-  	SUPPORTED_DEVICES += nbg6817
+	RAS_VERSION := "V1.99(OWRT.9999)C0"
-  	DEVICE_TITLE := ZyXEL NBG6817
+	SUPPORTED_DEVICES += nbg6817
-  	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
+	DEVICE_VENDOR := ZyXEL
-  	$(call Device/ZyXELImage)
+	DEVICE_MODEL := NBG6817
-  endef
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
-  TARGET_DEVICES += zyxel_nbg6817
+	$(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
+</code>
 ===== base-files =====
@@ Line 147: / Line 154: @@
 ===== profiles/00-default.mk =====
 Board core firmware.
-{{tag>wip}} --- //wulfy23 2019/07/15 03:10//