User Tools

Site Tools


docs:guide-user:storage:usb-installing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
docs:guide-user:storage:usb-installing [2018/08/12 21:10]
tmomas Section heading levels corrected
docs:guide-user:storage:usb-installing [2018/08/20 04:49] (current)
tmomas [To install USB Drivers Manually] link changed to interwiki link
Line 1: Line 1:
-====== Installing USB Drivers ======+====== Installing ​and troubleshooting ​USB Drivers ======
  
   - A **[[docs:​guide-user:​storage:​usb-drives-quickstart|Quick Start for installing a USB drive]]** is available. This solves the very common case of installing a single USB drive onto your OpenWrt device.   - A **[[docs:​guide-user:​storage:​usb-drives-quickstart|Quick Start for installing a USB drive]]** is available. This solves the very common case of installing a single USB drive onto your OpenWrt device.
Line 22: Line 22:
   - To install USB 3.0 drivers:<​code>​opkg install kmod-usb3   - To install USB 3.0 drivers:<​code>​opkg install kmod-usb3
 insmod xhci-hcd</​code>​ insmod xhci-hcd</​code>​
-  - To install support for UASP (required ​by some drives, enhances performance if supported):<​code>​opkg install kmod-usb-storage-uas</​code>​+  - To install support for UASP aka [[wp>​USB_Attached_SCSI|USB Attached SCSI]] ​(supported ​by many USB drives ​and drive enclosuresespecially if USB 3.0. It enhances performance if it'​s ​supported ​by both the drive and the host controller in your device):<​code>​opkg install kmod-usb-storage-uas</​code>​
  
  
docs/guide-user/storage/usb-installing.1534108247.txt.gz · Last modified: 2018/08/12 21:10 by tmomas