| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision |
| docs:guide-user:services:ups:software.nut [2018/09/12 14:00] – [nut_server] Add driver parameters (now must be predefined) cshoredaniel | docs:guide-user:services:ups:software.nut [2018/12/12 08:01] – [Post 18.06.2 / Commmit c95a1d3 on openwrt-18.06 / Commit f48b060 on master] better title cshoredaniel |
|---|
| NUT was updated with more UCI in commit [[https://github.com/openwrt/packages/commit/a23c4e85c5f6c9f9dcf67743b93c492ba833e365|a23c4e85]], which appears in the 18.06 release. | NUT was updated with more UCI in commit [[https://github.com/openwrt/packages/commit/a23c4e85c5f6c9f9dcf67743b93c492ba833e365|a23c4e85]], which appears in the 18.06 release. |
| |
| <wrap lo> | ===== 18.06 and beyond ===== |
| In __older release(s)__ there's problem with some USB UPSes (e.g. EATON) that are not recognized by usbhid-ups. This is apparently a bug in libusb-compat, since libusb (0.1.4) can recognize them. | |
| | |
| You can work around this by installing Attitude Adjustment, manually installing packages __libusb-compat__ and **nut-driver-usbhid-ups**, then manualy remove __libusb-compat__ and install **libusb** istead (packages in trunk may break on having manually installed libusb) | |
| </wrap> | |
| | |
| ===== 18.06 / Commit a23c4e85 ===== | |
| |
| <color #ed1c24>NOTE: configuration has **changed**</color>: It's now all done through UCI (see below) (and the UCI is changed). | <color #ed1c24>NOTE: configuration has **changed**</color>: It's now all done through UCI (see below) (and the UCI is changed). |
| |
| | |
| | <WRAP center round tip 60%> |
| If you wish to use a 'standard' NUT config just remove the symlinks in /etc/nut and replace them with regular NUT configuration files. | If you wish to use a 'standard' NUT config just remove the symlinks in /etc/nut and replace them with regular NUT configuration files. |
| | </WRAP> |
| | ==== 18.06 / Commit a23c4e85 ==== |
| |
| <WRAP center round alert 60%> | <WRAP center round alert 60%> |
| Due to changes in procd (or the OpenWrt shell wrapper around starting and stopping services with procd) stopping/restarting NUT stopped working properly. Work is underway to remedy this. Unfortunately issues were not reported before the 18.06 release, so it's not clear which (if any) point release will get the full set of fixes. | Due to changes in procd (or the OpenWrt shell wrapper around starting and stopping services with procd) stopping/restarting NUT stopped working properly. Work is underway to remedy this. Unfortunately issues were not reported before the 18.06 release. 18.06.1 has fixes for the most troublesome of the issues, and 18.06.2 should resolve the rest. |
| | |
| | [[https://github.com/openwrt/packages/pull/7638|PR #7638]] / [[https://github.com/openwrt/packages/commit/c95a1d3da89cb62eacc1d8217b861b36194d8838|Commmit c95a1d3]] Resolves these issues in the 18.06 branch. |
| | This should be in the next 18.06.x point release (18.06.2). |
| | |
| | See <del>[[https://github.com/openwrt/packages/pull/6897|PR #6987]], [[https://github.com/openwrt/packages/issues/6997|Issue #6997]], [[https://github.com/openwrt/packages/issues/6966|Issue #6966]], and [[https://github.com/openwrt/packages/issues/6843|Issue #6843]]</del> |
| | </WRAP> |
| | |
| | ==== Commit f48b060 on master ==== |
| | |
| | <WRAP center round important 60%> |
| | With [[https://github.com/openwrt/packages/commit/f48b060fa752fdf6556080dc1af221363f9b1ef4|Commit f48b060 on master]] all known issues are resolved. |
| | |
| | </WRAP> |
| | |
| | <WRAP center round important 60%> |
| | |
| | |
| | [[https://github.com/openwrt/packages/pull/7167/commits/8ff6a83a541b114437eab170a0760c1c04263aa2|Commit 8ff6a83]] adds building of serial drivers by default. |
| | |
| | [[https://github.com/openwrt/packages/pull/7167/commits/daa974cff0bef94c71277e703c32b3fd36f1411b|Commit daa974c]] completes the USB UPS hotplugging in which a USB UPS driver can be run as non-root and the USB device will be given the right permissions. |
| |
| See [[https://github.com/openwrt/packages/pull/6897|PR #6987]], [[https://github.com/openwrt/packages/issues/6997|Issue #6997]], [[https://github.com/openwrt/packages/issues/6966|Issue #6966]], and [[https://github.com/openwrt/packages/issues/6843|Issue #6843]] | [[https://github.com/openwrt/packages/pull/7592/commits/a5d06ce1106644b26a1b9d0ad87220d772d6b862|Commit a5d06ce]] adds hotplug support for serial UPSes when using a standare serial-to-USB cable. |
| </WRAP> | </WRAP> |
| |
| === config driver_global === | === config driver_global === |
| |
| **WIP**: Commit TBA | <WRAP center round important 60%> |
| | [[https://github.com/openwrt/packages/commit/44e57d4bdfe93214e9c031f181533bb0e4ef25ca|Commit 44e57d4]] (adds the following variables) and [[https://github.com/openwrt/packages/commit/f48b060fa752fdf6556080dc1af221363f9b1ef4| Commit f48b060]] (fixes synchronous setting) |
| | </WRAP> |
| |
| ^ Option ^ Type ^ Required ^ Default ^ Description ^ | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| |
| === config driver 'upsname' === | === config driver 'upsname' === |
| | |
| | **NB**: From 18.06 |
| |
| The config section name (e.g. 'upsname' above) will be used a the ups name. | The config section name (e.g. 'upsname' above) will be used a the ups name. |
| ^ notransferoids | boolean | no | false | Disable the monitoring of the low and high voltage transfer OIDs in the hardware. This will remove input.transfer.low and input.transfer.high from the list of variables. This should only be used on APCC Symmetra equipment which has strangeness in the three-phase power reporting. | | ^ notransferoids | boolean | no | false | Disable the monitoring of the low and high voltage transfer OIDs in the hardware. This will remove input.transfer.low and input.transfer.high from the list of variables. This should only be used on APCC Symmetra equipment which has strangeness in the three-phase power reporting. | |
| |
| **WIP**: Additional parameters: Commit TBA | <WRAP center round important 60%> |
| | [[https://github.com/openwrt/packages/commit/44e57d4bdfe93214e9c031f181533bb0e4ef25ca|Commit 44e57d4]] (adds the following variables) |
| | </WRAP> |
| |
| ^ Option ^ Type ^ Required ^ Default ^ Description ^ | |
| | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| | ^ synchronous | yes or no | no | no | Whether UPS must read all data from UPS before getting new data | |
| | ^ maxstartdelay | integer | no | 45 | How long NUT waits for driver to start before giving up | |
| | ^ retrydelay | integer | no | 5 | How long NUT waits to retry starting driver | |
| | ^ override | list of strings | no | //none// | names of 'override' config sections (below) | |
| | ^ default | list of strings | no | //none// | names of 'default' config sections (below) | |
| | ^ other | list of strings | no | //none// | names of 'other' config sections (below) | |
| | ^ otherflags | list of strings | no | //none// | names of 'otherflag' config sections (below) | |
| | |
| | config override 'override_[variable_name]' |
| | |
| | e.g. ''config override 'override_battery_charge_low''' creates ups.conf entry for ''override.battery.charge.low = '' |
| | |
| | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| | ^ value | varies | yes | //none// | Value driver 'pretends' UPS sent | |
| | |
| | config default 'default_[variable_name]' |
| | |
| | e.g. ''config default 'default_battery_charge_low''' creates ups.conf entry for ''default.battery.charge.low = '' |
| | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| | ^ value | varies | yes | //none// | Value driver 'pretends' UPS sent unless UPS actually sends a value | |
| | |
| | config override 'other_[parameter]' |
| | |
| | e.g. ''config other 'other_parameter''' creates ups.conf entry for ''parameter = '' |
| | |
| | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| | ^ value | varies | yes | //none// | A way to handle currently unknown (to UCI) parameters | |
| | |
| | config override 'otherflag_[parameter]' |
| | |
| | e.g. ''config override 'otherflag_extraflag''' creates ups.conf entry for ''extraflag'' |
| | |
| | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| | ^ value | boolean | yes | false | A way to handle currently unknown (to UCI) flags | |
| |
| === config user === | === config user === |
| | |
| | **NB** From 18.06 |
| | |
| ^ Option ^ Type ^ Required ^ Default ^ Description ^ | ^ Option ^ Type ^ Required ^ Default ^ Description ^ |
| ^ username | string | yes | ? (probably not) | 'username' (NUT only) for accessing a this server with e.g. upsmon (local or remote) | | ^ username | string | yes | ? (probably not) | 'username' (NUT only) for accessing a this server with e.g. upsmon (local or remote) | |
| </code> | </code> |
| ===== Pre 18.06 ===== | ===== Pre 18.06 ===== |
| | |
| | <wrap lo> |
| | In __older release(s)__ there's problem with some USB UPSes (e.g. EATON) that are not recognized by usbhid-ups. This is apparently a bug in libusb-compat, since libusb (0.1.4) can recognize them. |
| | |
| | You can work around this by installing Attitude Adjustment, manually installing packages __libusb-compat__ and **nut-driver-usbhid-ups**, then manualy remove __libusb-compat__ and install **libusb** istead (packages in trunk may break on having manually installed libusb) |
| | </wrap> |
| |
| You will want to have packages **nut**, **nut-server** and **nut-client** packages installed to have main functionality. | You will want to have packages **nut**, **nut-server** and **nut-client** packages installed to have main functionality. |