MaraDNS is a full featured DNS server written with security, simplicity, and performance in mind. It supports redundancy, using primary and secondary servers.
|maradns||1.3.07.09-1||libpthread||269717||maradns is a DNS server written with security, simplicity, and performance in mind.|
opkg install maradns vi /etc/mararc . /etc/init.d/maradns enable . /etc/init.d/maradns start netstat -a iptables -I INPUT -j ACCEPT -i eth0.1 -p tcp --dport 53 iptables -I INPUT -j ACCEPT -i eth0.1 -p udp --dport 53
The only configuration file is
There four executables:
|maradns||dns server; answers requests from clients|
|askmara||corresponding query tool; like dig or nslookup|
|zoneserver||zone transfer server; answers requests from secondary servers|
|getzone||corresponding query tool; like dig -axfr|
If you want MaraDNS to act like dnsmasq, as a recursive and/or authoritative DNS server edit
If you want to tie the process to a specific interface, edit the
bind_address parameter. This defaults to 0.0.0.0 meaning any interface. If both recursive and authoritative DNS is needed (i.e. you add a zonefile) you have to change this to the specific IP addresse(s) where you need maradns to listen, otherwise it will refuse to start.
If you want it to act as a primary server to other secondaries, you'll need to start
zoneserver additionally. Then add your zonefiles to
If you want to act as a secondary server, you'll need to do regular zonetransfers with
getzone. Generally you want to run a command like this on either a regular basis or triggered by some external event:
getzone domain.test 192.168.1.2 > /etc/maradns/db.domain.test
is the domain name,
is the primary name server and
is the filename of the zonefile. You will also have to restart maradns and/or zoneserver after you transferred to zones.
See etccrontabsroot to utilize
crond for that.
You can use
dnsmasq at the same time, but you will need to shut down the DNS functionality of
dnsmasq by setting the option 'port' to '0' in /etc/config/dhcp. See dhcp for more informations.
following uses NVRAM variable, these are not available any longer
It is possible to run dnsmasq and MaraDNS concurrently and have both listen on different interfaces. This allows for the separation of internal and external DNS services, as detailed by synthrax on this post:
I have both maradns and dnsmasq running on port 53. maradns serves public dns at the wan interface and dnsmasq takes care of the private subnet. in order for both to get along, you have to start maradns BEFORE dnsmasq.
Additionally, you need to have the line:
in your mararc file. To start the two name servers, you could modify
#!/bin/sh . /etc/functions.sh # maradns stuff starts here publicip=$(whatismyip vlan1) zonefile=/etc/maradns/my_dns_zone cat $zonefile.template |sed s/external_ip/$publicip/ > $zonefile.zone cat /etc/maradns/mararc.template |sed s/external_ip/$publicip/ > /etc/mararc /usr/sbin/maradns >/var/log/maradns 2>&1 & # maradns stuff ends here # interface to use for DHCP iface=lan [...the script continues...]
this script does the following things:
publicip=$(whatismyip $(nvram get wan_ifname))
After maradns has started, port 53 of the external iface will be “occupied”, which dnsmasq will complain about in the syslog (“[dnsmasq] setting –bind-interfaces option because of OS limitations”). You can safely ignore this message or you could probably start dnsmasq explicitly with the –bind-interfaces option to get rid of the message. Now, am adding two more options apart from the normal ones:
dnsmasq -a $(whatismyip $(nvram get lan_ifname)) -z
BTW: this works fine for me, as my ISP does (almost) never change my assigned IP. if you have a provider which changes your ip with every dhcp lease period or so, you would probably need to place something similar in /etc/hotplug.d/iface (or i don't know where)