Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision | ||
| docs:guide-user:network:wan:wwan:ethernetoverusb_rndis [2024/12/04 10:20] – [Setting up RNDIS-based dongles] andrewz | docs:guide-user:network:wan:wwan:ethernetoverusb_rndis [2024/12/14 23:38] – [Additional steps] andrewz | ||
|---|---|---|---|
| Line 56: | Line 56: | ||
| (you need to reboot or restart the network subsystem with ''/ | (you need to reboot or restart the network subsystem with ''/ | ||
| - | :!: Since RNDIS-based sticks create their own NAT'ed IP subnet, it is important that OpenWrt' | + | :!: Since RNDIS-based sticks create their own NAT'ed IP subnet, it is important that OpenWrt' |
| < | < | ||
| Line 69: | Line 69: | ||
| If the modem exposes //serial// interfaces then the appropriate driver needs to be installed ('' | If the modem exposes //serial// interfaces then the appropriate driver needs to be installed ('' | ||
| - | If auto-connect is disabled, or PIN-request is enabled on the modem, you may need to visit its admin web interface (typically at '' | + | If auto-connect is disabled or PIN-request is enabled on the modem or correct APN needs to be set, you may need to visit its admin web interface (typically at '' |
| + | < | ||
| + | daemon.notice netifd: wwan (20573): udhcpc: broadcasting discover | ||
| + | daemon.notice netifd: wwan (20573): udhcpc: broadcasting select for 192.168.1.101, | ||
| + | daemon.notice netifd: wwan (20573): udhcpc: lease of 192.168.1.101 obtained from 192.168.1.1, | ||
| + | daemon.notice netifd: Interface ' | ||
| + | </ | ||
| ==== RNDIS Troubleshooting ==== | ==== RNDIS Troubleshooting ==== | ||