This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revisionBoth sides next revision |
| docs:guide-user:network:wan:wwan:ethernetoverusb_rndis [2024/12/03 18:16] – [Additional steps] andrewz | docs:guide-user:network:wan:wwan:ethernetoverusb_rndis [2024/12/03 18:18] – [Additional steps] andrewz |
|---|
| ==== Additional steps ==== | ==== Additional steps ==== |
| |
| For some modems adding an interface will be sufficient, but others may need an APN provisioned, it is also sometimes necessary to send a special "dial" command to the AT command port, consult AT Commands Guide for the given modem for details. | For some modems adding an interface will be sufficient, but others may need an APN provisioned, it is also sometimes necessary to send a special "dial" command to the AT command port, consult AT Commands Guide for the given modem for details. If this is the case it is worth trying to configure the [[docs:guide-user:network:wan:wwan:ethernetoverusb_ncm|NCM]] interface instead. |
| |
| If the modem exposes //serial// interfaces then the appropriate driver needs to be installed (''kmod-usb-serial'' or ''kmod-usb-serial-option'' or ''kmod-usb-serial-qualcomm'' or ''kmod-usb-acm'') as well as a simple //terminal// app like ''picocom''. More about: sending [[docs:guide-user:network:wan:wwan:at_commands|AT commands]] from the router. | If the modem exposes //serial// interfaces then the appropriate driver needs to be installed (''kmod-usb-serial'' or ''kmod-usb-serial-option'' or ''kmod-usb-serial-qualcomm'' or ''kmod-usb-acm'') as well as a simple //terminal// app like ''picocom''. More about: sending [[docs:guide-user:network:wan:wwan:at_commands|AT commands]] from the router. |
| |
| If the modem needs a "dial" command sent on each connection attempt, then it is worth trying to configure the [[docs:guide-user:network:wan:wwan:ethernetoverusb_ncm|NCM]] interface instead. | |
| |
| \\ | \\ |