Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
docs:guide-user:network:wan:wwan:ethernetoverusb_ncm [2024/11/10 14:42] – [Installation] andrewzdocs:guide-user:network:wan:wwan:ethernetoverusb_ncm [2024/11/17 11:17] – [Network configuration] andrewz
Line 128: Line 128:
 Using Luci web interface: navigate to Network → Interfaces → Add new interface… → Protocol : NCM, Interface: "ttyUSB1" Using Luci web interface: navigate to Network → Interfaces → Add new interface… → Protocol : NCM, Interface: "ttyUSB1"
  
-The interface selected above is the "AT Command Port" or "PCUI" in Huawei terms, ''ttyUSB1'' is shown here as an example only, different modems have different port assignments like ''/dev/ttyUSBx'' or ''/dev/ttyACMx''. The //data// interface like ''/dev/cdc-wdm0'' will be discovered by the connection script automatically.+The interface selected above is the "AT Command Port" or "PCUI" in Huawei terms, ''ttyUSB1'' is shown here as an example only, different modems have different port assignments like ''/dev/ttyUSBx'' or ''/dev/ttyACMx''. The //data// interface like ''wwan0'' and corresponding device like ''/dev/cdc-wdm0'' will be discovered by the connection script automatically.
  
 Enter your APN and select the 'IP Protocol' as instructed by the carrier. Enter your APN and select the 'IP Protocol' as instructed by the carrier.
  • Last modified: 2024/11/20 12:02
  • by andrewz