docs:guide-user:network:wan:multiwan:mwan3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
docs:guide-user:network:wan:multiwan:mwan3 [2018/06/24 07:41]
sshambar [Capabilities]
docs:guide-user:network:wan:multiwan:mwan3 [2018/09/16 20:03] (current)
bobafetthotmail [Ensure the CONNTRACK module is enabled in OpenWrt] obsolete
Line 298: Line 298:
   * Repeat as above to ensure every WAN connection that has been created is working   * Repeat as above to ensure every WAN connection that has been created is working
  
-===== Ensure the CONNTRACK module is enabled in OpenWrt ===== 
  
-mwan3 requires that the CONNTRACK module is enabled and active on its WAN interfaces. 
- 
-  * If the interfaces are in the "​wan"​ firewall zone, and the "​Masquerading"​ option is enabled for the firewall zone, the CONNTRACK module is enabled by default already (this is the default OpenWrt configuration) 
-  * If masquerading/​NAT is **not** enabled for the WAN interface (for example, if just routing without NAT is being using between the LAN and your different WAN interfaces),​ you need to add the following rule to the LAN and WAN zone configurations in your /​etc/​config/​firewall:​ 
- 
-<​code>​ 
-option '​conntrack'​ '​1'​ 
-</​code>​ 
- 
-  * Reboot after making this change 
-  * For more information,​ see [[docs:​guide-user:​firewall:​firewall_configuration#​notes_on_connection_tracking|OpenWRT conntrack/​notrack]] 
  
 ===== Manual download of packages ===== ===== Manual download of packages =====
docs/guide-user/network/wan/multiwan/mwan3.txt · Last modified: 2018/09/16 20:03 by bobafetthotmail