Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
docs:guide-user:network:openwrt_as_clientdevice [2021/10/17 17:31] – [Command-line instructions] reorganize content vgaeteradocs:guide-user:network:openwrt_as_clientdevice [2021/10/17 17:38] – [Command-line instructions] vgaetera
Line 23: Line 23:
  
 ===== Command-line instructions ===== ===== Command-line instructions =====
-Configure the LAN interface statically with new IP address ''192.168.1.2'', netmask ''255.255.255.0'', gateway ''192.168.1.1'', and DNS ''192.168.1.1''.+Configure the LAN interface statically with the new IP address ''192.168.1.2'', netmask ''255.255.255.0'', gateway ''192.168.1.1'', and DNS ''192.168.1.1''.
  
 <code bash> <code bash>
Line 35: Line 35:
 </code> </code>
  
-Note that changing IP address hangs SSH session.+Note that changing the IP address causes the SSH session to hang/disconnect.
 Now you can connect the network cable from the device's LAN port to your existing network, the other router's LAN ports usually. Now you can connect the network cable from the device's LAN port to your existing network, the other router's LAN ports usually.
  
  • Last modified: 2023/10/14 05:58
  • by vgaetera